LOCKHEED MARTIN TRAINING LOGISTICS SOLUTIONS 100 Global Innovation Cir. Orlando, FL Frank Wisdo Phone:
|
|
|
- Branden Gilbert French
- 7 years ago
- Views:
Transcription
1 SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. &ANSI/NCSL Z & ANSI/NCSL Z LOCKHEED MARTIN TRAINING LOGISTICS SOLUTIONS 100 Global Innovation Cir. Orlando, FL Frank Wisdo Phone: CALIBRATION Valid To: December 31, 2016 Certificate Number: In recognition of the successful completion of the A2LA evaluation process, accreditation is granted to this laboratory to perform the following calibrations 1 : I. Electrical DC/Low Frequency Parameter/Equipment Range CMC 2, 4 ( ) Comments DC Voltage Generate, Fixed Values 100 mv 1 V 10 V 19 V 100 V 1 kv 2.8 µv/v 0.7 µv/v 0.6 µv/v 0.6 µv/v 0.6 µv/v 0.7 µv/v Fluke 5720A Characterized Calibrator V 10 V 0.62 µv/v 0.34 µv/v Fluke 732B DC Voltage Generate (1 to 40) kv 0.2 % Spellman power supply with HVD (A2LA Cert. No ) 4/13/2015 Page 1 of 32
2 Parameter/Equipment Range CMC 2, 4 ( ) Comments DC Voltage Generate & Measure 1 mv to 1V (1 to 10) V 0.44 µv 0.62 µv/v Fluke 732B w/720a Fixed Values 0.1V 1V 10V 100 V 1000 V 2.5 µv/v 0.6 µv/v 0.4 µv/v 0.6 µv/v 0.9 µv/v Fluke 732A w/752a DC Voltage Measure Up to 100 mv (0.1 to 1) V (1 to 10) V (10 to 100) V (100 to 1000) V 5.3 µv/v µv 3.6 µv/v µv 3.5 µv/v µv 4.6 µv/v + 40 µv 4.6 µv/v mv Fluke 8508A (1.0 to 40) kv 0.2 % Spellman HVD w/hp 3458A DC Current Generate (1 to 10) µa (10 to 220) µa 220 µa to 2.2 ma (2.2 to 22) ma (22 to 220) ma >200 ma to 2 A (2 to 20) A (>20 to 100) A 40 µa/a 11 µa/a 11 µa/a 10 µa/a 10 µa/a 17 µa/a 17 µa/a 88 µa/a + 4 ma Fluke 5720A w/8508a Fluke 5720A w/8508a Fluke 52120A w/5720a (A2LA Cert. No ) 4/13/2015 Page 2 of 32
3 Parameter/Equipment Range CMC 2, 4 ( ) Comments DC Current Measure (1 to 10) µa (10 to 100) µa 100 μa to 1 ma (1 to 10) ma (10 to 100) ma >200 ma to 2 A (2 to 20) A (>20 to 100) A 40 µa/a 11 µa/a 11 µa/a 11 µa/a 10 µa/a 17 µa/a 17 µa/a 91 µa/a Fluke 8508A w/fluke 742A std. resistors Leeds & Northup 0.1 Ω Leeds & Northup 0.01 Ω Fluke Y5020, Leeds & Northup 0.01 Ω DC Resistance Generate, Fixed Points 0.01 Ω 0.1 Ω 11 µω/ω 13 µω/ω Leeds & Northrup resistors 1 Ω 10 Ω 100 Ω 1 kω 10 kω 100 kω 1 MΩ 10 MΩ 1.1 µω/ω 1.1 µω/ω 1.1 µω/ω 1.1 µω/ω 1.2 µω/ω 1.2 µω/ω 2.7 µω/ω 4.2 µω/ω Fluke Fluke Fluke Fluke 742-1k Fluke k Fluke k Fluke 742-1M Fluke M 100 MΩ 1 GΩ 10 µω/ω 32 µω/ω Guildline 9334 DC Resistance Measure 1 mω 10 mω 100 mω 1 Ω 10 Ω 100 Ω 1 kω 10 kω 0.80 μω/ω 0.79 μω/ω 0.51 μω/ω 0.36 μω/ω 0.36 μω/ω 0.37 μω/ω 0.39 μω/ω 0.40 μω/ω MI 6010C/MI6011 resistors in oil 10 kω 100 kω 1 MΩ 10 MΩ 100 MΩ 1 GΩ 0.20 µω/ω 0.70 μω/ω 0.86 μω/ω 1.6 μω/ω 3.5 μω/ω 11 μω/ω MI 6000B resistors in air bath (A2LA Cert. No ) 4/13/2015 Page 3 of 32
4 Parameter/Equipment Range CMC 2, 4 ( ) Comments DC Resistance Measure (cont) 20 M to 200 M 200 M to 2 GΩ (2 to 20) GΩ (20 to 200) GΩ 200 G to 2 TΩ (2 to 20) TΩ % % % 0.17 % 0.21 % 0.43 % Guildline 6530 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate / Measure, Fixed Points 2.2 mv 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz % % % % % % % % % % % Fluke 792A 7 mv 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz % % % % % % % % % % % (A2LA Cert. No ) 4/13/2015 Page 4 of 32
5 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate / Measure, Fixed Points (cont) 22 mv 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz % 100 µv/v 100 µv/v 100 µv/v 90 µv/v 90 µv/v % % % % % Fluke 792A 70 mv 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz 80 µv/v 43 µv/v 38 µv/v 36 µv/v 35 µv/v 33 µv/v 43 µv/v 80 µv/v % % % 220 mv 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz 32 µv/v 24 µv/v 16 µv/v 14 µv/v 14 µv/v 16 µv/v 22 µv/v 43 µv/v 77 µv/v % % (A2LA Cert. No ) 4/13/2015 Page 5 of 32
6 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate / Measure, Fixed Points (cont) 700 mv 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz 28 µv/v 22 µv/v 13 µv/v 12 µv/v 11 µv/v 12 µv/v 11 µv/v 14 µv/v 29 µv/v 36 µv/v 82 µv/v Fluke 792A 2.2 V 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz 27 µv/v 21 µv/v 9 µv/v 6 µv/v 7 µv/v 6 µv/v 7 µv/v 13 µv/v 24 µv/v 31 µv/v 57 µv/v 7 V 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz 26 µv/v 21 µv/v 8 µv/v 6 µv/v 6 µv/v 7 µv/v 7 µv/v 8 µv/v 22 µv/v 26 µv/v 67 µv/v (A2LA Cert. No ) 4/13/2015 Page 6 of 32
7 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate / Measure, Fixed Points (cont) 22 V 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 500 khz 1 MHz 27 µv/v 21 µv/v 8 µv/v 7 µv/v 7 µv/v 7 µv/v 8 µv/v 11 µv/v 22 µv/v 26 µv/v 50 µv/v Fluke 792A 70 V 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 300 khz 26 µv/v 21 µv/v 9 µv/v 8 µv/v 8 µv/v 8 µv/v 9 µv/v 11 µv/v 32 µv/v 220 V 10 Hz 20 Hz 100 Hz 10 khz 20 khz 50 khz 100 khz 38 µv/v 22 µv/v 10 µv/v 9 µv/v 9 µv/v 9 µv/v 11 µv/v 19 µv/v 700 V 100 Hz 10 khz 20 khz 50 khz 100 khz 18 µv/v 13 µv/v 14 µv/v 14 µv/v 20 µv/v 55 µv/v (A2LA Cert. No ) 4/13/2015 Page 7 of 32
8 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Generate / Measure, Fixed Points (cont) 1000 V 100 Hz 10 khz 20 khz 21 µv/v 19 µv/v 19 µv/v 19 µv/v Fluke 792A Measure Only 50 khz 100 khz 20 µv/v 53 µv/v AC Voltage Measure (2.2 to 7) mv 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz % µv % µv % µv % + 2 µv % µv % + 4 µv 0.16 % + 8 µv 0.41 % + 8 µv Fluke 5790A (7 to 22) mv 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz % µv 70 µv/v µv 83 µv/v µv 62 µv/v + 2 µv 49 µv/v µv 0.11 % + 4 µv 0.12 % + 8 µv 0.23 % + 8 µv (22 to 70) mv 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz % µv 48 µv/v µv 89 µv/v µv 24 µv/v + 2 µv 90 µv/v µv % + 4 µv % + 8 µv 0.15 % + 8 µv (A2LA Cert. No ) 4/13/2015 Page 8 of 32
9 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Measure (cont) (70 to 220) mv 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz % µv 64 µv/v µv 40 µv/v µv 62 µv/v + 2 µv % µv % + 4 µv % + 8 µv 0.11 % + 8 µv Fluke 5790A (220 to 700) mv 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 84 µv/v µv 47 µv/v µv 38 µv/v µv 54 µv/v + 2 µv % µv % + 4 µv 0.03 % + 8 µv 0.11 % + 8 µv 700 mv to 2.2 V 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 76 µv/v µv 48 µv/v µv 29 µv/v µv 35 µv/v + 2 µv 79 µv/v µv % + 4 µv % + 8 µv 0.12 % + 8 µv (2.2 to 7) V 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 80 µv/v 51 µv/v 33 µv/v 32 µv/v 64 µv/v % % 0.13 % (A2LA Cert. No ) 4/13/2015 Page 9 of 32
10 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Measure (cont) (7 to 22) V 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 80 µv/v 42 µv/v 29 µv/v 40 µv/v 86 µv/v 0.20 % 0.42 % 0.14 % Fluke 5790A (22 to 70) V 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 80 µv/v 44 µv/v 28 µv/v 31 µv/v 73 µv/v 0.02 % % 0.14 % (70 to 220) V 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 500 khz to 1 MHz 82 µv/v 51 µv/v 37 µv/v 48 µv/v 93 µv/v % % 0.13 % (220 to 700) V 40 Hz to 20 khz (20 to 50) khz (50 to 100) khz (100 to 300) khz (300 to 500) khz 90 µv/v 50 µv/v 38 µv/v 43 µv/v 86 µv/v % % (700 to 1000) V 100 Hz to 20 khz (20 to 50) khz (50 to 100) khz % % % (A2LA Cert. No ) 4/13/2015 Page 10 of 32
11 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Current Generate (Up to 220) µa 40 Hz to (1 to 5) khz (5 to 10) khz % + 16 na % + 10 na % + 8 na % + 12 na 0.11 % + 65 na Fluke 5720A w/5725a 220 µa to 2.2 ma 40 Hz to (1 to 5) khz (5 to 10) khz % + 40 na % + 35 na % + 35 na % na 0.12 % na (2.2 to 22) ma 40 Hz to (1 to 5) khz (5 to 10) khz % µa % µa % µa % µa 0.16 % µa (22 to 220) ma 40 Hz to (1 to 5) khz (5 to 10) khz % µa % µa % µa % + 40 µa 0.16 % + 80 µa 220 ma to 2.2 A 20 Hz to (1 to 5) khz (5 to 10) khz % + 35 µa % + 80 µa 0.85 % ma (2.2 to 10) A 20 Hz to (1 to 5) khz (5 to 10) khz % ma 0.11 % ma 0.37 % ma (10 to 20) A (10 to 65) Hz (65 to 300) Hz 300 Hz to (1 to 3) khz (3 to 6) khz (6 to 10) khz % ma % ma % ma 0.23 % + 31 ma 0.78 % + 62 ma 2.4 % + 94 ma Fluke 52120A w/5720a (20 to 120) A (10 to 65) Hz (65 to 300) Hz 300 Hz to (1 to 3) khz (3 to 6) khz (6 to 10) khz % + 20 ma % + 28 ma % + 94 ma 0.23 % ma 0.78 % ma 3.1 % ma (A2LA Cert. No ) 4/13/2015 Page 11 of 32
12 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Current Measure (100 to 300) µa 40 Hz to to 10 khz % % 68 µa/a 87 µa/a AC resistor shunts w/ Fluke 792A (1 to 2) ma 40 Hz to to 10 khz % % 59 µa/a 86 µa/a (2 to 20) ma (40 to 400) Hz 400 Hz to 10 khz % 93 µa/a 60 µa/a 55 µa/a A40 current shunts w/ Fluke 5790A (20 to 200) ma (10 to 40) Hz 40 Hz to 10 khz % 95 µa/a 54 µa/a 200 ma to 2 A 40 Hz to 5 khz (5 to 10) khz % % 92 µa/a % (2 to 10) A (10 to 40) Hz 40 Hz to 5 khz 5 khz to 10 khz % % % (10 to 20) A 20 Hz to 10 khz % (A2LA Cert. No ) 4/13/2015 Page 12 of 32
13 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Flatness Generate 1.1 mv (10 to 30) Hz 30 Hz to 120 khz 120 khz to 2 MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.3 % 0.1 % 0.2 % + 3 µv 0.4 % + 3 µv 0.6 % + 3 µv 1.5 % + 15 µv Fluke 5720A w/option 03, referenced to 3 mv (10 to 30) Hz 30 Hz to 120 khz 120 khz to 2 MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.3 % 0.1 % 0.1 % + 3 µv 0.3 % + 3 µv 0.5 % + 3 µv 1.5 % + 3 µv 3 mv to 3.5 V (10 to 30) Hz 30 Hz to 120 khz 120 khz to 2 MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.3 % 0.1 % 0.1 % + 3 µv 0.2 % + 3 µv 0.4 % + 3 µv 1.0 % + 3 µv AC Voltage Flatness Measure 2.2 mv (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 500) khz 500 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.11 % % % % + 1µV % + 1µV % + 1 µv 0.18 % + 1 µv 0.31 % + 1 µv 0.72 % + 2 µv Fluke 5790A w/option 030, relative to (A2LA Cert. No ) 4/13/2015 Page 13 of 32
14 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Flatness Measure (cont) 7 mv (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 500) khz 500 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.11 % % % % + 1 µv % + 1 µv % + 1 µv 0.11 % + 1 µv 0.19 % + 1 µv 0.39 % + 2 µv Fluke 5790A w/option 030, relative to 22 mv (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 500) khz 500 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.10 % 0.05 % 0.05 % 0.07 % 0.07 % 0.07 % 0.10 % 0.17 % 0.39 % 70 mv (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 500) khz 500 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.10 % % % % % % 0.11 % 0.16 % 0.37 % 220 mv (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 500) khz 500 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.10 % % % % % % 0.11 % 0.16 % 0.37 % (A2LA Cert. No ) 4/13/2015 Page 14 of 32
15 Parameter/Range Frequency CMC 2, 4 ( ) Comments AC Voltage Flatness Measure (cont) 700 mv to 7 V (10 to 30) Hz (30 to 120) Hz 120 Hz to 1.2 khz (1.2 to 500) khz 500 khz to 1.2 MHz (1.2 to 2) MHz (2 to 10) MHz (10 to 20) MHz (20 to 30) MHz 0.10 % % % % % % 0.11 % 0.16 % 0.37 % Fluke 5790A w/option 030, relative to Capacitance Measure (1 to 100) pf (100 to ) pf 2.4 µf/f 3.4 µf/f Andeen Hagerling 2500A option - E 1 pf to µf (12 to 30) Hz (>30 to 100) Hz (>100 to 250) Hz >250 Hz to (>1 to 3) khz (>3 to 6) khz (>6 to 10) khz (>10 to 20) khz (>20 to 50) khz (>50 to 100) khz 0.49 % 0.12 % 0.04 % 0.031% % % % 0.05 % 0.07 % 0.10 % 0.20 % Quad Tech 1693A AC Resistance mω to kω (12 to 30) Hz (>30 to 100) Hz (>100 to 250) Hz >250 Hz to (>1 to 3)kHz (>3 to 6) khz (>6 to 10) khz (>10 to 20) khz (>20 to 50) khz (>50 to 100) khz 0.07 % 0.05 % 0.04 % % % % % 0.05 % 0.07 % 0.10 % 0.20 % Quad Tech 1693A (A2LA Cert. No ) 4/13/2015 Page 15 of 32
16 Parameter/Range Frequency CMC 2, 4 ( ) Comments Inductance Measure µh to H (12 to 30) Hz (>30 to 100) Hz (>100 to 250) Hz >250 Hz to (>1 to 3) khz (>3 to 6) khz (>6 to 10) khz (>10 to 20) khz (>20 to 50) khz 0.48 % 0.14 % 0.06 % 0.04 % % % % % 0.08 % 0.21 % Quad Tech 1693A Phase Measure 0 to Hz to 20 khz (2 to 10) khz (10 to 20) khz (50 to 100) khz 0.05 deg 0.08 deg 0.15 deg 0.46 deg Clarke-Hess 2500A Distortion Measure Input: (0.1 to 130) V Distortion % 10 Hz to 50 khz (50 to 100) khz 18 % rdg or 0.04 % distortion * 18 % rdg or 0.04 % distortion * Krohn-Hite 6900A *whichever uncertainty is greater (100 to 500) khz 18 % rdg or 0.14 % distortion * (0.5 to 1) MHz 29 % rdg or 0.85% distortion * (A2LA Cert. No ) 4/13/2015 Page 16 of 32
17 II. Electrical RF/Microwave Parameter/Range Frequency CMC 2 ( ) Comments RF Absolute Power Generate Sine Wave Into 50 Ω (23.97 to -50) dbm < 10 MHz (10 to 50) MHz (50 to 80) MHz 0.15 dbm 0.21 dbm 0.41 dbm Agilent function generator 33250A w/bnc(f) (+13 to -70.0) dbm 100 khz to 1.2 GHz 0.62 dbm Agilent signal generator E4426, Type-N(f) (-10 to 13) dbm (-60 to -10) dbm 10 MHz to 2 GHz ( 2 to 20) GHz (>20 to 40) GHz (>40 to 50) GHz 10 MHz to 2 GHz ( 2 to 20) GHz (>20 to 40) GHz (>40 to 50) GHz 0.7 dbm 0.8 dbm 1.1 dbm 2.0dBm 1.0 dbm 1.2 dbm 1.4 dbm 2.3 dbm Agilent synthesized sweeper 83650A, comparison to characterized signal generator 2.4 mm(m) (A2LA Cert. No ) 4/13/2015 Page 17 of 32
18 Parameter/Range Frequency CMC 2 ( ) Comments RF Absolute Power Measure Power Reference 1 mw, Type-N(f), 50 Ω Coaxial Diode Power Sensors 50 MHz 0.47 % rdg Agilent power meter 432A w/agilent power sensor 478A-H76 (+10 to -30) dbm, 50 Ω (+20 to +10) dbm, 50 Ω (0.1 to 0.3) MHz 0.3 MHz to 4.2 GHz (0.1 to 0.3) MHz 0.3 MHz to 4.2 GHz 0.10 dbm 0.06 dbm 0.16 dbm 0.14 dbm Agilent power meter E4418B w/agilent power sensor /8482A Type N(m) (+10 to -30) dbm, 50 Ω 10 MHz 10 MHz to 6 GHz (6 to 15) GHz (15 to 16) GHz (16 to 17) GHz (17 to 18) GHz 0.07 dbm 0.06 dbm 0.06 dbm 0.07 dbm 0.08 dbm 0.09 dbm Agilent power meter E4418B w/agilent power sensor 8481A Type N(m) (+20 to +10) dbm, 50 Ω 10 MHz (10 to 30) MHz 30 MHz to 5 GHz (5 to 16) GHz (16 to 17) GHz (17 to 18) GHz 0.15 dbm 0.14 dbm 0.14 dbm 0.14 dbm 0.15 dbm 0.16 dbm (-20 to -30) dbm, 50 Ω (10 to 30) MHz 30 MHz to 6 GHz (6 to 15) GHz (15 to 18) GHz 0.09 dbm 0.07 dbm 0.08 dbm 0.09 dbm (-30 to -70) dbm, 50 Ω (10 to 30) MHz 30 MHz to 5 GHz (5 to 10) GHz (10 to 15) GHz (15 to 18) GHz 0.09 dbm 0.06 dbm 0.06 dbm 0.06 dbm 0.08 dbm Agilent 8481D (+10 to -30) dbm, 50 Ω (50 to 100) MHz (0.100 to 5) GHz (5 to 15) GHz (15 to 20) GHz (20 to 26.5) GHz 0.06 dbm 0.07 dbm 0.08 dbm 0.09 dbm 0.10 dbm Agilent power meter E4418B w/agilent power sensor /8485A 3.5 mm(m) (A2LA Cert. No ) 4/13/2015 Page 18 of 32
19 Parameter/Range Frequency CMC 2 ( ) Comments RF Absolute Power Measure (cont) Coaxial Diode Power Sensors (cont) (+20 to +10) dbm, 50 Ω (50 to 100) MHz (0.100 to 5) GHz (5 to 15) GHz (15 to 20) GHz (20 to 26.5) GHz 0.14 dbm 0.15 dbm 0.15 dbm 0.16 dbm 0.16 dbm Agilent power meter E4418B w/agilent power sensor /8485A 3.5 mm(m) (-20 to -30) dbm, 50 Ω (50 to 100) MHz (0.100 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz 0.06 dbm 0.06 dbm 0.06 dbm 0.07 dbm (-30 to -70) dbm, 50 Ω (50 to 100) MHz (0.100 to 8) GHz (8 to 20) GHz (20 to 26.5) GHz 0.11 dbm 0.11 dbm 0.12 dbm 0.13 dbm (+10 to -30) dbm, 50 Ω (0.50 to 9) GHz (9 to 16) GHz (16 to 20) GHz (20 to 25) GHz (25 to 28) GHz (28 to 41) GHz (41 to 42) GHz (42 to 44) GHz (44 to 48) GHz (48 to 49) GHz (49 to 50) GHz 0.09 dbm 0.10 dbm 0.10 dbm 0.12 dbm 0.13 dbm 0.14 dbm 0.14 dbm 0.17 dbm 0.18 dbm 0.19 dbm 0.23 dbm Agilent power meter E4418B w/agilent power sensor /8487A 2.4 mm(m) (+20 to +10) dbm, 50 Ω (0.50 to 5) GHz (5 to 18) GHz (18 to 21) GHz (21 to 25) GHz (25 to 28) GHz (28 to 41) GHz (41 to 42) GHz (42 to 49) GHz (44 to 48) GHz (48 to 49) GHz (49 to 50) GHz 0.15 dbm 0.15 dbm 0.16 dbm 0.16 dbm 0.17 dbm 0.18 dbm 0.19 dbm 0.20 dbm 0.21 dbm 0.23 dbm 0.26 dbm (A2LA Cert. No ) 4/13/2015 Page 19 of 32
20 Parameter/Equipment Range CMC 2 ( ) Comments Pulse Measure Transition Time >7 ps 20 ps + 5 x 10-5 D HP 54750A w/54752a D is the instrument delay setting in seconds Parameter/Range Frequency CMC 2 ( ) Comments Attenuation Measure N-type (0 to -10) db (-10 to -20) db (-20 to -30) db (-30 to -40) db (-40 to -50) db 45 MHz to 2 GHz db (0.037 to 0.039) db (0.039 to 0.049) db (0.049 to 0.096) db (0.096 to 0.28) db Agilent 8510C 85055A verification kit and 85054B calibration kit (0 to -10) db (-10 to -20) db (-20 to -30) db (-30 to -40) db (-40 to -50) db (2 to 8) GHz (0.065 to 0.071) db (0.071 to 0.072) db (0.072 to 0.073) db (0.073 to 0.075) db (0.075 to 0.085) db (0 to -10) db (-10 to -20) db (-20 to -30) db (-30 to -40) db (-40 to -50) db (8 to 18) GHz (0.094 to 0.096) db (0.096 to 0.097) db (0.097 to 0.097) db (0.097 to 0.10) db (0.10 to 0.12) db (A2LA Cert. No ) 4/13/2015 Page 20 of 32
21 Parameter/Range Frequency CMC 2 ( ) Comments Attenuation Measure (cont) (0.0 to -5.0) db (-6 to -15) db (-16 to -25) db (-26 to -35) db (-36 to -42) db (-43 to -65) db (-66 to -75) db (-76 to -85) db (-86 to -95) db (-96 to -100) db 100 khz to 22 GHz db db db db db db db db db db R&S FSMR (0.0 to -1.0) db (-1 to -10) db (-10 to -20) db (-20 to -30) db (-30 to -40) db (-40 to -50) db (-50 to -60) db (-60 to -70) db (-70 to -80) db (-80 to -90) db (-90 to -100) db (-100 to -110) db (22 to 26.5) GHz db db db db db db db db db db db 0.13 db Attenuation Generate (0 to 33) db (33 to 64) db (64 to 100) db 100 khz to 100 MHz db db 0.14 db Fluke 9640A (A2LA Cert. No ) 4/13/2015 Page 21 of 32
22 Parameter/Range Frequency CMC 2 ( ) Comments Power Sensor Calibration Factor Measure N Type PSCAL/ 11706S calibration system plus power sensors 1μW to 100 mw 10 MHz to 13 GHz (13 to 15) GHz (15 to 16) GHz (16 to 18) GHz 1.0 % Cal Factor 1.1 % Cal Factor 1.2 % Cal Factor 1.8 % Cal Factor Agilent 8481A-H84 1 mw to 25 W 10 MHz to 14 GHz (14 to 15) GHz (15 to 16) GHz (16 to 18) GHz 1.4 % Cal Factor 1.5 % Cal Factor 1.6 % Cal Factor 2.3 % Cal Factor Agilent 8481H-H μw to 3 W 10 MHz to 14 GHz (14 to 15) GHz (15 to 16) GHz (16 to 18) GHz 1.3 % Cal Factor 1.5 % Cal Factor 1.6 % Cal Factor 2.3 % Cal Factor Agilent 8481A-H pw to 10 μw 1 μw to 100 mw (10 to 30) MHz 50 MHz 50 MHz to 5 GHz (5 to 15) GHz (15 to 16) GHz (16 to 17) GHz (17 to 18) GHz 0.1 MHz to 1 MHz (1 to 30) MHz 50 MHz 100 MHz to 4.2 GHz 1.1 % Cal Factor 0.9 % Cal Factor 1.1 % Cal Factor 1.2 % Cal Factor 1.4 % Cal Factor 1.6 % Cal Factor 1.8 % Cal Factor 1.0 % Cal Factor 1.1 % Cal Factor 0.9 % Cal Factor 1.1 % Cal Factor Agilent 8481D-H84 Agilent 8482A-H84 (A2LA Cert. No ) 4/13/2015 Page 22 of 32
23 Parameter/Range Frequency CMC 2 ( ) Comments Power Sensor Calibration Factor Measure (cont) N Type PSCAL/ 11706S calibration system plus power sensors 1 mw to 25 W (0.1 to 1) MHz (1 to 30) MHz 50 MHz 100 MHz to 4.2 GHz 1.5 % Cal Factor 1.5 % Cal Factor 1.4 % Cal Factor 1.5 % Cal Factor Agilent 8482H-H μw to 3 W (0.1 to 1) MHz (1 to 30) MHz 50 MHz 100 MHz to 4.2 GHz 1.2 % Cal Factor 1.3 % Cal Factor 1.2 % Cal Factor 1.3 % Cal Factor Agilent 8482A-H84 10 μw to 10 mw (10 to 30) MHz 50 MHz 50 MHz to 11 GHz (11 to 14) GHz (14 to 15) GHz (15 to 16) GHz (16 to 17) GHz (17 to 18) GHz 1.0 % Cal Factor 0.9 % Cal Factor 1.0 % Cal Factor 1.2 % Cal Factor 1.3 % Cal Factor 1.6 % Cal Factor 1.7 % Cal Factor 1.8 % Cal Factor HP 8478B-H mm 100 pw to 10 μw (50 to 100) MHz 100 MHz to 1 GHz (1 to 8) GHz (8 to 12) GHz (12 to 18) GHz (18 to 22) GHz (22 to 26.5) GHz 2.0 % Cal Factor 1.6 % Cal Factor 1.7 % Cal Factor 1.9 % Cal Factor 2.2 % Cal Factor 2.7 % Cal Factor 2.8 % Cal Factor Agilent 8485A-H84 1 μw to 100 mw 50 MHz 50 MHz to 1 GHz (1 to 12.4) GHz (12.4 to 16) GHz (16 to 18) GHz (18 to 22) GHz (22 to 26) GHz (26 to 26.5) GHz 1.0 % Cal Factor 1.5 % Cal Factor 1.7 % Cal Factor 2.0 % Cal Factor 2.1 % Cal Factor 2.6 % Cal Factor 2.8 % Cal Factor 2.8 % Cal Factor Agilent 8485D-H84 (A2LA Cert. No ) 4/13/2015 Page 23 of 32
24 Parameter/Range Frequency CMC 2 ( ) Comments Power Sensor Calibration Factor Measure (cont) 2.4 mm 1 μw to 100 mw 50 MHz 50 MHz to 4 GHz (4 to 13) GHz (13 to 17) GHz (17 to 21) GHz (21 to 22) GHz (22 to 23) GHz (23 to 24) GHz (24 to 25) GHz (25 to 28) GHz (28 to 29) GHz (29 to 30) GHz (30 to 31) GHz (31 to 33) GHz (33 to 43) GHz (43 to 44) GHz (44 to 47) GHz (47 to 48) GHz (48 to 49) GHz (49 to 50) GHz 1.0 % Cal Factor 1.5 % Cal Factor 1.6 % Cal Factor 1.7 % Cal Factor 1.8 % Cal Factor 1.9 % Cal Factor 2.0 % Cal Factor 2.1 % Cal Factor 2.2 % Cal Factor 2.3 % Cal Factor 2.4 % Cal Factor 2.7 % Cal Factor 2.8 % Cal Factor 2.9 % Cal Factor 2.4 % Cal Factor 2.7 % Cal Factor 3.0 % Cal Factor 3.1 % Cal Factor 3.5 % Cal Factor 4.3 % Cal Factor PSCAL/11706S calibration system plus power sensors HP 8487A-H84 Thermal Noise Figure System Measure 5 db Excess Noise Ratio 10 MHz 100 MHz 1 GHz 2 GHz 3 GHz 4 GHz 5 GHz 6 GHz 7 GHz 8 GHz 9 GHz 10 GHz 0.15 db 0.16 db 0.15 db 0.16 db 0.16 db 0.16 db 0.17 db 0.18 db 0.18 db 0.18 db 0.21 db 0.20 db CalLab Solutions SAM HP 346A H13 (A2LA Cert. No ) 4/13/2015 Page 24 of 32
25 Parameter/Range Frequency CMC 2 ( ) Comments Thermal Noise Figure System Measure (cont) 5 db Excess Noise Ratio 15 db Excess Noise Ratio 11 GHz 12 GHZ 13 GHz 14 GHz 15 GHz 16 GHz 17 GHz 18 GHz 10 MHz 100 MHz 1 GHz 2 GHz 3 GHz 4 GHz 5 GHz 6 GHz 7 GHz 8 GHz 9 GHz 10 GHz 11 GHz 12 GHz 13 GHz 14 GHz 15 GHz 16 GHZ 17 GHz 18 GHz 19 GHz 20 GHz 21 GHz 22 GHz 23 GHz 24 GHz 25 GHz 26 GHz 26.5 GHz 0.22 db 0.24 db 0.23 db 0.26 db 0.25 db 0.26 db 0.25 db 0.27 db 0.15 db 0.16 db 0.15 db 0.15dB 0.16 db 0.15 db 0.17 db 0.19 db 0.21 db 0.19 db 0.22 db 0.21 db 0.22 db 0.23 db 0.22 db 0.21 db 0.22 db 0.20 db 0.20 db 0.20 db 0.19 db 0.22 db 0.24 db 0.25 db 0.25 db 0.24 db 0.25 db 0.26 db 0.26 db CalLab Solutions SAM HP 346A H13 CalLab Solutions SAM HP 346C H13 (A2LA Cert. No ) 4/13/2015 Page 25 of 32
26 Parameter/Equipment Range CMC 2 ( ) Comments Reflection Measure S 11 /S 22 Agilent 8753E network analyzer 7 mm khz to 6 GHz (0.8 to 1) lin (0.008 to 0.021) lin (1.1 to 5.2) deg Agilent 85051A verification kit (0.6 to 0.8) lin (0.006 to 0.012) lin (1.1 to 5.1) deg (0.4 to 0.6) lin (0.005 to 0.012) lin (1.1 to 5.2) deg (0.2 to 0.4) lin (0.004 to 0.008) lin (1.2 to 5.5) deg 300 khz to 6 GHz (0.0 to 0.2) lin (0.004 to 0.005) lin (1.5 to 180) deg Agilent 8753E network analyzer 45 MHz to 18 GHz (0.8 to 1) lin (0.008 to 0.021) lin (1.1 to 5.1) deg Agilent 85051A verification kit (0.6 to 0.8) lin (0.006 to 0.012) lin (1.1 to 5.1) deg Agilent 8510C network analyzer (0.4 to 0.6) lin (0.005 to 0.012) lin (1.1 to 5.1) deg (0.2 to 0.4) lin (0.004 to 0.008) lin (1.1 to 5.5) deg Agilent 85051A verification kit (0.0 to 0.2) lin (0.04 to 0.005) lin (1.5 to 180) deg (A2LA Cert. No ) 4/13/2015 Page 26 of 32
27 Parameter/Equipment Range CMC 2 ( ) Comments Reflection Measure S 11 /S 22 (cont) 3.5 mm (2 to 26.5) GHz (0.8 to 1) lin (0.028 to 0.044) lin (3.6 to 8.1) deg Agilent 8510C network analyzer (0.6 to 0.8) lin (0.02 to 0.032) lin (3.6 to 7.7) deg Agilent 85053A verification kit (0.4 to 0.6) lin (0.014 to 0.022) lin (3.6 to 7.8) deg (0.2 to 0.4) lin (0.01 to 0.15) lin (3.7 to 8.7) deg (0.0 to 0.2) lin (0.008 to 0.1) lin (4.6 to 180) deg 2.4 mm (26.5 to 50) GHz (0.8 to 1) lin (0.034 to 0.054) lin (10 to 13) deg Agilent 85057B verification kit (0.6 to 0.8) lin (0.026 to 0.042) lin (10 to 13) deg (0.4 to 0.6) lin (0.026 to 0.033) lin (11 to 14) deg (0.2 to 0.4) lin (0.017 to 0.025) lin (11 to 16) deg (0.0 to 0.2) lin (0.015 to 0.021) lin (13 to 180) deg (A2LA Cert. No ) 4/13/2015 Page 27 of 32
28 Parameter/Equipment Range CMC 2 ( ) Comments Transmission Measure S 12 /S 21 7 mm khz to 6 GHz (10 to 0) db (0.02 to 0.1) db (0.2 to 0.9) deg Agilent 8753E network analyzer (0 to -10) db (0.02 to 0.06) db (0.2 to 0.4) deg (-10 to -20) db (0.014 to 0.07) db (0.3 to 0.5) deg Agilent 85051A verification kit (-20 to -30) db (0.05 to 0.08) db (0.38 to 0.58) deg (-30 to -40) db (0.06 to 0.12) db (0.4 to 0.7) deg (-40 to -50) db (0.12 to 0.2) db (0.7 to 1.5) deg 7 mm khz to 6 GHz (-50 to -60) db (-60 to -70) db (0.1 to 0.5) db (0.8 to 3.0) deg (0.25 to 1.5) db (2.0 to 10) deg Agilent 8753E network analyzer, Agilent 85051A verification kit 7 mm 3 45 MHz to 18 GHz (-70 to -80) db (10 to 0) db (0 to -10) db 0.65 to 3.5) db (5.0 to 12) deg (0.032 to 0.14) db (0.9 to 4.2) deg (0.026 to 0.054) db (0.9 to 3.9) deg Agilent 8510C network analyzer, Agilent 85051A verification kit (-10 to -20) db (0.026 to 0.056) db (0.9 to 4.0) deg (-20 to -30) db (0.037 to 0.056) db (0.9 to 4.0) deg (-30 to -40) db (0.056 to 0.14) db (1.0 to 4.1) deg (A2LA Cert. No ) 4/13/2015 Page 28 of 32
29 Parameter/Equipment Range CMC 2 ( ) Comments Transmission Measure S 12 /S 21 (cont) 7 mm 3 45 MHz to 18 GHz (-40 to -50) db (-50 to -60) db (0.061 to 0.41) db (1.3 to 4.1) deg (0.084 to 1.4) db (0.9 to 5.3) deg Agilent 8510C network analyzer, Agilent 85051A verification kit (-60 to -70) db (0.16 to 5.2) db (0.9 to 27) deg 3.5 mm (2 to 26.5) GHz (10 to 0) db (0 to -10) db (0.11 to 0.22) db (2.2 to 6.6) deg (0.11 to 0.16) db (2.2 to 6.6) deg Agilent 8510C network analyzer Agilent 85053A verification kit (-10 to -20) db (0.12 to 0.16) db (2.4 to 6.6) deg (-20 to -30) db (0.12 to 0.17) db (2.4 to 6.6) deg (-30 to -40) db (0.11 to 0.19) db (2.4 to 7.0) deg (-40 to -50) db (0.12 to 0.31) db (2.5 to 7.8) deg (-50 to -60) db (0.14 to 0.74) db (2.6 to 11) deg (-60 to -70) db (0.21 to 2.3) db (3.2 to 11) deg (26.5 to 50) GHz (10 to 0) db (0.15 to 0.22) db (8.7 to 11) deg Agilent 85057B verification kit (0 to -10) db (0.15 to 0.19) db (8.7 to 11) deg (-10 to -20) db (0.15 to 0.25) db (8.7 to 12) deg (A2LA Cert. No ) 4/13/2015 Page 29 of 32
30 Parameter/Equipment Range CMC 2 ( ) Comments Transmission Measure S 12 /S 21 (cont) 2.4 mm (26.5 to 50) GHz (-20 to -30) db (-30 to -40) db (-40 to -50) db (0.15 to 0.45) db (8.8 to 13) deg (0.19 to 1.1) db (9.1 to 17) deg (0.34 to 3.7) db (10 to 30) deg Agilent 8510C network analyzer Agilent 85057B verification kit III. Mechanical Parameter/Equipment Range CMC 2 ( ) Comments Mass 1 mg 2 mg 5 mg 10 mg 20 mg 50 mg 100 mg 200 mg 500 mg 1 g 2 g 5 g 10 g 20 g 50 g 100 g 200 g 500 g 1000 g 2000 g mg mg mg mg mg mg mg mg 0.13 mg g g g g g g g g g g g Comparison to Class 1 weights Force Tension and Compression Up to 500 lbf 0.50 lbf Class F weights (A2LA Cert. No ) 4/13/2015 Page 30 of 32
31 Parameter/Equipment Range CMC 2 ( ) Comments Torque Wrenches (10 to 320) in ozf (20 to 240) in lbf (24 to 500) ft lbf (100 to 1000) ft lbf 0.39 in ozf 0.67 in lbf 0.44 ft lbf 1.5 ft lbf AKO torque system Torque Calibrators and Transducers (5 to 160) in ozf (10 to 240) in lbf (2 to 100) ft lbf in ozf in lbf ft lbf Calibration arms and Class 1 and Class F weights Pressure Measuring Equipment (14.6 to 150) psia psia Mensor 15000, transducer based comparison Pressure Gauges and Transducers (0.2 to 5.0) psia (5 to 25) psia (25 to 200) psia psi/psi psi/psi psi/psi Ruska 2465 (0 to 3000) psig psi/psi Ruska 2470 IV. Thermodynamics Parameter/Equipment Range CMC 2 ( ) Comments Relative Humidity (10 % to 90 %) RH 0.63 % RH Thunder Scientific 2500 Temperature Measuring Equipment -30 C to 150 C 0.03 C Hart 9171, 2560, 5628 (A2LA Cert. No ) 4/13/2015 Page 31 of 32
32 V. Time & Frequency Parameter/Equipment Range CMC 2 ( ) Comments Time Interval 1 msec to 10 s 2.5 ns HP 53132A Stop Watch 1 min to 24 hrs 0.24 s Datum GPS 1PPS out Frequency Measuring Equipment 10 MHz Hz/Hz Datum GPS rec. (Rubidium Osc.) Frequency Measure 0.1 Hz to 3 GHz Hz/Hz + 4 µhz HP 53132A w/gps (3 to 40) GHz Hz/Hz HP 5352B w/gps 1 This laboratory offers commercial calibration service. 2 Calibration and Measurement Capability Uncertainty (CMC) is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or nearly ideal measuring equipment. CMCs represent expanded uncertainties expressed at approximately the 95 % level of confidence, usually using a coverage factor of k = 2. The actual measurement uncertainty of a specific calibration performed by the laboratory may be greater than the CMC due to the behavior of the customer s device and to influences from the circumstances of the specific calibration. 3 Includes 7 mm and type N connectors with larger uncertainty for 7 mm coaxial. 4 The stated measured values are determined using the indicated instrument (see Comments). This capability is suitable for the calibration of the devices intended to measure or generate the measured value in the ranges indicated. CMCs are expressed as either a specific value that covers the full range or as percent of or fraction of the reading plus a fixed floor specification. (A2LA Cert. No ) 4/13/2015 Page 32 of 32
33 A2LA has accredited LOCKHEED MARTIN TRAINING LOGISTICS SOLUTIONS Orlando, FL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories. This laboratory also meets the requirements of ANSI/NCSLI Z and the requirements of ANSI/NCSLI Z and any additional program requirements in the field of calibration. This accreditation demonstrates technical competence for a defined scope and the operation of a laboratory quality management system (refer to joint ISO-ILAC-IAF Communiqué dated 8 January 2009). Presented this 13 th day of April President & CEO For the Accreditation Council Certificate Number Valid to December 31, 2016 For the calibrations to which this accreditation applies, please refer to the laboratory s Calibration Scope of Accreditation.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994. ALLTITE, INC. 1600 Murdock, Wichita, KS 67214 Bruce Demaree Phone: 800 498 6721
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ALLTITE, INC. 1600 Murdock, Wichita, KS 67214 Bruce Demaree Phone: 800 498 6721 CALIBRATION Valid To: September 30, 2016 Certificate
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSLI Z540-1-1994 TEKTRONIX, INC. 13725 SW Karl Braun Drive Beaverton, OR 97077 Andrew Mumford Phone: 503 627 2476 CALIBRATION Valid to: June 30, 2018
3M CORPORATE METROLOGY SERVICES St. Paul, MN
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY 3M CORPORATE METROLOGY SERVICES St. Paul, MN for technical competence in the field of Calibration This laboratory
ipimms is an industry primary impedance measurement service supplied and maintained by UK s National Physical Laboratory. [4]
![ipimms is an industry primary impedance measurement service supplied and maintained by UK s National Physical Laboratory. [4]](/thumbs/39/18479752.jpg "ipimms is an industry primary impedance measurement service supplied and maintained by UK s National Physical Laboratory. [4]")
Page: 1 of 25 LABORATORY LOCATION: (PERMANENT LABORATORY) AGILENT TECHNOLOGIES MICROWAVE PRODUCTS (M) SDN. BHD. BAYAN LEPAS FREE INDUSTRIAL ZONE 11900 PENANG, MALAYSIA This laboratory accredited under
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. 393.00 Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc., has assessed the Laboratory of: (Hereinafter called the Organization) and
INyMET SALVATIERRA NO. 32-5 COL SAN BARTOLO ATEPEHUACAN D.F. 07730 MEXICO
This is to signify that INyMET SALVATIERRA NO. 32-5 COL SAN BARTOLO ATEPEHUACAN D.F. 07730 MEXICO Calibration Laboratory CL-101 has met the requirements of the IAS Accreditation Criteria for Calibration
Schedule of Accreditation issued by United Kingdom Accreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK
code Location code Customers Sites locations: 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK Calibration Centre Bolkiah Garrison BB3510 Negara Brunei Darussalam Contact: Mr Lim Tiong Thai Tel: +673-2-386475
PROMPT ENGINEERING & TRADING SERVICES CO. W.L.L P.O. BOX 24067 BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR
This is to signify that PROMPT ENGINEERING & TRADING SERVICES CO. W.L.L P.O. BOX 24067 BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR Calibration Laboratory CL-165 has met the requirements
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 F. D. HURKA COMPANY 4731 Stockholm Court Charlotte, NC 28273 Paul Yanney Phone: 704 552 0008 CALIBRATION Valid To: December 31, 2016
Accredited Laboratory
Accredited Laboratory A2LA has accredited CORPORATE CONSULTING SERVICE & INSTRUMENTS INC. Akron, OH for technical competence in the field of Calibration This laboratory is accredited in accordance with
1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Old Bracknell Lane West Bracknell Berkshire RG12 7AH Contact: Mr M Trotter Tel: +44 (0)1344 459314 Fax: +44 (0)1344 465556 E-Mail: mtrotter@bis.fm
PIN CONFIGURATION FEATURES ORDERING INFORMATION ABSOLUTE MAXIMUM RATINGS. D, F, N Packages
DESCRIPTION The µa71 is a high performance operational amplifier with high open-loop gain, internal compensation, high common mode range and exceptional temperature stability. The µa71 is short-circuit-protected
Scope of accreditation SP Technical Research Institute, Department of Calibration and Verification, Borås - 1002
2015-12-11 2014/2779 Technical Research Institute, Department of Calibration and Verification, Borås - 1002 Accredited calibration activities are conducted at the following laboratories: Box 56 SE-230
MUHAMMAD ABDULLAH AL-AZZAZ COMPANY LIMITED P.O. BOX 31172 AL-KHOBAR 31952 KINGDOM OF SAUDI ARABIA
This is to signify that MUHAMMAD ABDULLAH AL-AZZAZ COMPANY LIMITED P.O. BOX 31172 AL-KHOBAR 31952 KINGDOM OF SAUDI ARABIA Calibration Laboratory CL-151 has met the requirements of the IAS Accreditation
SIGNAL GENERATORS and OSCILLOSCOPE CALIBRATION
1 SIGNAL GENERATORS and OSCILLOSCOPE CALIBRATION By Lannes S. Purnell FLUKE CORPORATION 2 This paper shows how standard signal generators can be used as leveled sine wave sources for calibrating oscilloscopes.
Electricity and Magnetism, Georgia, GEOSTM (Georgian National Agency for Standards and Metrology)
single references 1 1.018 V Temperature (23 ± 3) C 6 µv 2 95% No 1 single references 10 10 V Temperature (23 ± 3) C 25 µv 2 95% No 2 low ranges DMM > 0.01 10 V Temperature (23 ± 3) C 2E-06U + 3E-06 to
NI USB-5681 RF Power Meter Specifications
NI USB-568 RF Power Meter Specifications General This document lists specifications for the NI USB-568 RF power meter. Minimum or maximum specifications are warranted under the following conditions: hour
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator
NTE923 & NTE923D Integrated Circuit Precision Voltage Regulator Description: The NTE923 and NTE923D are voltage regulators designed primarily for series regulator applications. By themselves, these devices
Data Sheet. HFBR-0600Z Series SERCOS Fiber Optic Transmitters and Receivers
HFBR-0600Z Series SERCOS Fiber Optic Transmitters and Receivers Data Sheet SERCOS SERCOS is a SErial Realtime COmmunication System, a standard digital interface for communication between controls and drives
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Unit 7 Contact: Mr S C Sparks Solent Industrial Estate Tel: +44 (0)1489 790296 Hedge End Fax: +44 (0)1489 790294 Southampton E-Mail: info@southcal.co.uk
Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz
Technical Datasheet Scalar Network Analyzer Model 8003-10 MHz to 40 GHz The Giga-tronics Model 8003 Precision Scalar Network Analyzer combines a 90 db wide dynamic range with the accuracy and linearity
Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM
Isolated AC Sine Wave Input 3B42 / 3B43 / 3B44 FEATURES AC averaging technique used to rectify, amplify, and filter 50 Hz to 400 Hz sine-wave signals. Accepts inputs of between 20 mv to 550 V rms to give
SCS Directory Accreditation number: SCS 0115
International standard: ISO/IEC 17025:2005 Swiss standard: SN EN ISO/IEC 17025:2005 METRON SA Calibration Laboratory Via Luserte Sud 7 CH-6572 Quartino Head: Angelo Capone Responsible for MS: Angelo Capone
css Custom Silicon Solutions, Inc.
css Custom Silicon Solutions, Inc. CSS555(C) CSS555/ PART DESCRIPTION The CSS555 is a micro-power version of the popular 555 Timer IC. It is pin-for-pin compatible with the standard 555 timer and features
Wahl C50 Calibrator FEATURES
NEW! On Site Multifunction Portable Far Superior Accuracy as Compared to Fluke! Simultaneous Measurement and Generation Quick Connect Terminals Anti-Shock Boot Quick Connect Terminals Navigator Power Supply,
2000 6½-Digit Multimeter
13 built-in measurement functions 2000 readings/second at 4½ digits Optional scanner cards for multipoint measurements IEEE-488 and RS-232 interfaces Fluke 8840/42 command set Ordering Information 2000
HA-5104/883. Low Noise, High Performance, Quad Operational Amplifier. Features. Description. Applications. Ordering Information. Pinout.
HA5104/883 April 2002 Features This Circuit is Processed in Accordance to MILSTD 883 and is Fully Conformant Under the Provisions of Paragraph 1.2.1. Low Input Noise Voltage Density at 1kHz. 6nV/ Hz (Max)
CA3420. Features. 0.5MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier. Applications. Functional Diagram. Ordering Information
CA Data Sheet October, FN.9.MHz, Low Supply Voltage, Low Input Current BiMOS Operational Amplifier The CA is an integrated circuit operational amplifier that combines PMOS transistors and bipolar transistors
Loop Calibration and Maintenance
Loop Calibration and Maintenance Application Note Introduction Process instrumentation requires periodic calibration and maintenance to ensure that it is operating correctly. This application note contains
User's Guide. True RMS Industrial Multimeter
User's Guide 97650 True RMS Industrial Multimeter Ω C ã F ã 10A V µ 10A V ã ã ma A Introduction This meter measures AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency (electrical & electronic),
Application Note Noise Frequently Asked Questions
: What is? is a random signal inherent in all physical components. It directly limits the detection and processing of all information. The common form of noise is white Gaussian due to the many random
INTEGRATED CIRCUITS DATA SHEET. TDA7000 FM radio circuit. Product specification File under Integrated Circuits, IC01
INTEGRATED CIRCUITS DATA SHEET File under Integrated Circuits, IC01 May 1992 GENERAL DESCRIPTION The is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components
Features. Ordering Information. * Underbar marking may not be to scale. Part Identification
MIC86 Teeny Ultra Low Power Op Amp General Description The MIC86 is a rail-to-rail output, input common-mode to ground, operational amplifier in Teeny SC7 packaging. The MIC86 provides 4kHz gain-bandwidth
Teseq ESD Simulator Verification
Teseq ESD Simulator Verification Background Greg Senko, President Teseq Inc. North American division of Teseq Laboratory Technical Manager Edison NJ This presentation was first given in 2003 when lab was
DS 600. A contact free flux gate based current measurement sensor 600A rms
DS 600 A contact free flux gate based current measurement sensor 600A rms DS 600 is member of the small housing sensor family. The family includes a 200A and a 600A version. 600A rms - 900A peak Maximum
High Speed, Low Power Dual Op Amp AD827
a FEATURES High Speed 50 MHz Unity Gain Stable Operation 300 V/ms Slew Rate 120 ns Settling Time Drives Unlimited Capacitive Loads Excellent Video Performance 0.04% Differential Gain @ 4.4 MHz 0.198 Differential
Agilent 8904A Multifunction Synthesizer dc to 600 khz
Agilent 8904A Multifunction Synthesizer dc to 600 khz Technical Specifications Build complex waveforms from common signals The Agilent Technologies 8904A Multifunction Synthesizer uses VLSIC technology
PowerAmp Design. PowerAmp Design PAD135 COMPACT HIGH VOLATGE OP AMP
PowerAmp Design COMPACT HIGH VOLTAGE OP AMP Rev G KEY FEATURES LOW COST SMALL SIZE 40mm SQUARE HIGH VOLTAGE 200 VOLTS HIGH OUTPUT CURRENT 10A PEAK 40 WATT DISSIPATION CAPABILITY 200V/µS SLEW RATE APPLICATIONS
CellAdvisor. JD725A Dual-Port Cable and Antenna Analyzer
CellAdvisor JD725A Dual-Port Cable and Antenna Analyzer Many modern wireless base stations are a complex system of multiple RF components, such as low-noise amplifiers (LNA), duplexers, and tower-mounted
Op Amp Circuit Collection
Op Amp Circuit Collection Note: National Semiconductor recommends replacing 2N2920 and 2N3728 matched pairs with LM394 in all application circuits. Section 1 Basic Circuits Inverting Amplifier Difference
PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.
Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and
PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323
Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to
High-ohmic/high-voltage resistors
FEATURES High pulse loading capability Small size. APPLICATIONS Where high resistance, high stability and high reliability at high voltage are required High humidity environment White goods Power supplies.
US-SPI New generation of High performances Ultrasonic device
US-SPI New generation of High performances Ultrasonic device Lecoeur Electronique - 19, Rue de Courtenay - 45220 CHUELLES - Tel. : +33 ( 0)2 38 94 28 30 - Fax : +33 (0)2 38 94 29 67 US-SPI Ultrasound device
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B)
Amplifier for Small Magnetic and Electric Wideband Receiving Antennas (model AAA-1B) 1. Description and Specifications Contents 1.1 Description 1.2 1.2 Specifications 1.3 1.3 Tested parameters in production
Optocoupler, Phototransistor Output, with Base Connection
4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4
DESCRIPTIO. LT1226 Low Noise Very High Speed Operational Amplifier
FEATRES Gain of Stable GHz Gain Bandwidth V/µs Slew Rate.6nV/ Hz Input Noise Voltage V/mV Minimum DC Gain, R L = Ω mv Maximum Input Offset Voltage ±V Minimum Output Swing into Ω ide Supply Range ±.V to
Report Of. Shielding Effectiveness Test For. SafeSleeve Radiation Shielding Technology. Test Date(s): June 07 June 09, 2015
Report Of Shielding Effectiveness Test For SafeSleeve Radiation Shielding Technology Test Date(s): June 07 June 09, 2015 Issue Date: June 10, 2015 UST Project No: 15-0137 Total Number of Pages Contained
Agilent U1230 Series Handheld Digital Multimeters (DMMs)
Agilent U1230 Series Handheld Digital Multimeters (DMMs) Data Sheet Retool your expectations with the new Agilent U1230 Series Handheld DMMsthe first to combine a built-in LED flashlight, both audible
Supertex inc. HV256. 32-Channel High Voltage Amplifier Array HV256. Features. General Description. Applications. Typical Application Circuit
32-Channel High Voltage Amplifier Array Features 32 independent high voltage amplifiers 3V operating voltage 295V output voltage 2.2V/µs typical output slew rate Adjustable output current source limit
K817P/ K827PH/ K847PH. Optocoupler with Phototransistor Output. Vishay Semiconductors. Description. Applications. Features.
Optocoupler with Phototransistor Output Description The K817P/ K827PH/ K847PH consist of a phototransistor optically coupled to a gallium arsenide infrared-emitting diode in an 4-lead up to 16 lead plastic
High Common-Mode Rejection. Differential Line Receiver SSM2141. Fax: 781/461-3113 FUNCTIONAL BLOCK DIAGRAM FEATURES. High Common-Mode Rejection
a FEATURES High Common-Mode Rejection DC: 00 db typ 60 Hz: 00 db typ 20 khz: 70 db typ 40 khz: 62 db typ Low Distortion: 0.00% typ Fast Slew Rate: 9.5 V/ s typ Wide Bandwidth: 3 MHz typ Low Cost Complements
TESTS OF 1 MHZ SIGNAL SOURCE FOR SPECTRUM ANALYZER CALIBRATION 7/8/08 Sam Wetterlin
TESTS OF 1 MHZ SIGNAL SOURCE FOR SPECTRUM ANALYZER CALIBRATION 7/8/08 Sam Wetterlin (Updated 7/19/08 to delete sine wave output) I constructed the 1 MHz square wave generator shown in the Appendix. This
Switch Selection Guide
Switch Selection Guide FREQUENCY RANGE (GHz) 0.1 0.2 0.5 1 2 4 8 12.4 18 40 0.1 18 SWITCHES WITH INTEGRATED DRIVERS MODEL OR SERIES PAGE REFLECTIVE SPST SWITCHES* DM86, FM86 DM86H, FM86H 1 18 F91 0.2 4
High Speed, Low Power Monolithic Op Amp AD847
a FEATURES Superior Performance High Unity Gain BW: MHz Low Supply Current:.3 ma High Slew Rate: 3 V/ s Excellent Video Specifications.% Differential Gain (NTSC and PAL).9 Differential Phase (NTSC and
10 Multimeter. Users Manual
10 Multimeter Users Manual 1991-2001 Fluke Corporation, All rights reserved. Printed in USA All product names are trademarks of their respective companies. 10 MULTIMETER m m Mk SELECT RANGE OFF VDC VAC
High-ohmic/high-voltage resistors
FEATURES These resistors meet the safety requirements of: UL1676 (range 510 kω to 11 MΩ) EN60065 BS60065 (U.K.) NFC 92-130 (France) VDE 0860 (Germany) High pulse loading capability Small size. APPLICATIONS
Four quadrant diode front end module for the Virgo Linear Alignment 3/ 30 mw, plus configuration
NI K HEF NATIONAL INSTITUTE FOR NUCLEAR AND HIGH ENERGY PHYSICS Four quadrant diode front end module for the Virgo Linear Alignment 3/ 30 mw, plus configuration Find the most recent files and related files
Low Cost Instrumentation Amplifier AD622
Data Sheet FEATURES Easy to use Low cost solution Higher performance than two or three op amp design Unity gain with no external resistor Optional gains with one external resistor (Gain range: 2 to 000)
Digital Pressure Measuring Instrument MDR480
Description The digital panel instrument MDR480 is designed to measure, display, and monitor pressures in industrial applications. The instrument is panel mounted with a front frame dimension of 96 mm
DDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
Monolithic Amplifier PMA2-43LN+ Ultra Low Noise, High IP3. 50Ω 1.1 to 4.0 GHz. The Big Deal
Ultra Low Noise, High IP3 Monolithic Amplifier 50Ω 1.1 to 4.0 GHz The Big Deal Ultra low noise figure, 0.46 db High gain, high IP3 Small size, 2 x 2 x 1mm 2mm x 2mm Product Overview Mini-Circuits is an
USB Smart Power Sensor
50Ω -30 dbm to +20 dbm, 9 khz to 4000 MHz The Big Deal Low cost USB HID device compatible with 32/64 Bit operating systems Includes Measurement Application GUI (Graphical User Interface) software with
BPW34. Silicon PIN Photodiode VISHAY. Vishay Semiconductors
Silicon PIN Photodiode Description The is a high speed and high sensitive PIN photodiode in a miniature flat plastic package. Its top view construction makes it ideal as a low cost replacement of TO-5
Small Signal Fast Switching Diode
Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY
HIGH REPEATABILITY SPDT, BROADBAND 12 GHZ MAGNETIC-LATCHING RF RELAY SERIES RF121 RELAY TYPE RF Magnetic-Latching, SPDT, Through-hole Relay DESCRIPTION The ultraminiature RF121 relay is built on Teledyne
4N25 Phototransistor Optocoupler General Purpose Type
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
MILE Encoder for EC 90 flat
MILE Encoders Edition October 2014 MILE Encoder for EC 90 flat Encoders Document ID: 1 495 818-06 ag Brünigstrasse 220 P.O.Box 263 CH-6072 Sachseln Phone +41 41 666 15 00 Fax +41 41 666 16 50 www.maxonmotor.com
DATA SHEET. MMBT3904 NPN switching transistor DISCRETE SEMICONDUCTORS. Product data sheet Supersedes data of 2002 Oct 04. 2004 Feb 03.
DISCRETE SEMICONDUCTORS DATA SHEET dbook, halfpage M3D088 Supersedes data of 2002 Oct 04 2004 Feb 03 FEATURES Collector current capability I C = 200 ma Collector-emitter voltage V CEO = 40 V. APPLICATIONS
Agilent N2717A Service Software Performance Verification and Adjustment Software for the Agilent ESA Spectrum Analyzers Product Overview
Agilent N2717A Service Software Performance Verification and Adjustment Software for the Agilent ESA Spectrum Analyzers Product Overview Reduce your cost of ownership by minimizing time to calibrate and
Precision, Unity-Gain Differential Amplifier AMP03
a FEATURES High CMRR: db Typ Low Nonlinearity:.% Max Low Distortion:.% Typ Wide Bandwidth: MHz Typ Fast Slew Rate: 9.5 V/ s Typ Fast Settling (.%): s Typ Low Cost APPLICATIONS Summing Amplifiers Instrumentation
MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches
19-652; Rev 1; 8/12 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate
2002 IS Catalog. Page
00 IS Catalog Page Introduction... 47 Transmitter (8 V entity parameter) KFD-CR-Ex1.30.00 (-wire transmitter)... 48 KFD-CR-Ex1.30.300 (- or 3-wire transmitter)... 49 KFD-CR-Ex1.30.300 90C (- or 3-wire,
Agilent AN 1316 Optimizing Spectrum Analyzer Amplitude Accuracy
Agilent AN 1316 Optimizing Spectrum Analyzer Amplitude Accuracy Application Note RF & Microwave Spectrum Analyzers Table of Contents 3 3 4 4 5 7 8 8 13 13 14 16 16 Introduction Absolute versus relative
Energy Management Energy Meter Type EM23 DIN
Energy Management Energy Meter Type EM23 DIN Class 1 (kwh) according to EN62053-21 Class B (kwh) according to EN50470-3 Class 2 (kvarh) according to EN62053-23 Accuracy ±0.5 RDG (current/voltage) Energy
TL084 TL084A - TL084B
A B GENERAL PURPOSE JFET QUAD OPERATIONAL AMPLIFIERS WIDE COMMONMODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORTCIRCUIT PROTECTION HIGH INPUT IMPEDANCE
Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS
Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box
TETRIS 1000 / 1500. High Impedance Active Probe Order-No: 881-000-000 881-500-000. Features:
Features: High Impedance Active Probe Order-No: 881-000-000 881-500-000 High Input Impedance Interchangeable Spring Tips Contacts adjacent Pins in 2.54 mm Pitch Useable with any 50 Ω Measuring Instrument
M 140i. Multifunction Calibrator. Operation Manual
M 140i Multifunction Calibrator Operation Manual M-140i Multifunction Calibrator MEATEST, s.r.o. 2 Operation Manual v33 MEATEST, s.r.o. M-140i Multifunction Calibrator Content Operation Manual... 1 Basic
LM741. Single Operational Amplifier. Features. Description. Internal Block Diagram. www.fairchildsemi.com
Single Operational Amplifier www.fairchildsemi.com Features Short circuit protection Excellent temperature stability Internal frequency compensation High Input voltage range Null of offset Description
TDA7448 6 CHANNEL VOLUME CONTROLLER 1 FEATURES 2 DESCRIPTION. Figure 1. Package
6 CHANNEL CONTROLLER FEATURES 6 CHANNEL INPUTS 6 CHANNEL OUTPUTS ATTENUATION RANGE OF 0 TO -79dB CONTROL IN.0dB STEPS 6 CHANNEL INDEPENDENT CONTROL ALL FUNCTION ARE PROGRAMMABLE VIA SERIAL BUS DESCRIPTION
MADR-009443-0001TR. Quad Driver for GaAs FET or PIN Diode Switches and Attenuators. Functional Schematic. Features. Description. Pin Configuration 2
Features Functional Schematic High Voltage CMOS Technology Four Channel Positive Voltage Control CMOS device using TTL input levels Low Power Dissipation Low Cost 4x4 mm, 20-lead PQFN Package 100% Matte
Agilent 34405A Multimeter 5.5 Digit Dual Display, Benchtop DMM More Capabilities at a Value Price. Data Sheet
Agilent 34405A Multimeter 5.5 Digit Dual Display, Benchtop DMM More Capabilities at a Value Price Data Sheet Features 120000 counts resolution 16 built-in measurement functions including temperature and
Low Noise, Matched Dual PNP Transistor MAT03
a FEATURES Dual Matched PNP Transistor Low Offset Voltage: 100 V Max Low Noise: 1 nv/ Hz @ 1 khz Max High Gain: 100 Min High Gain Bandwidth: 190 MHz Typ Tight Gain Matching: 3% Max Excellent Logarithmic
Rail-to-Rail, High Output Current Amplifier AD8397
Rail-to-Rail, High Output Current Amplifier AD8397 FEATURES Dual operational amplifier Voltage feedback Wide supply range from 3 V to 24 V Rail-to-rail output Output swing to within.5 V of supply rails
40 V, 200 ma NPN switching transistor
Rev. 01 21 July 2009 Product data sheet BOTTOM VIEW 1. Product profile 1.1 General description NPN single switching transistor in a SOT883 (SC-101) leadless ultra small Surface-Mounted Device (SMD) plastic
CMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779
CMO 1.8 V to 5.5 V, 2.5 Ω PT witch/2:1 Mux in Tiny C70 Package AG779 FEATURE 1.8 V to 5.5 V single supply 2.5 Ω on resistance 0.75 Ω on-resistance flatness 3 db bandwidth >200 MHz Rail-to-rail operation
MPC 4. Machinery Protection Card Type MPC 4 FEATURES. Continuous on-line Machinery Protection Card
Machinery Protection Card Type FEATURES Continuous on-line Machinery Protection Card Real-time measurement and monitoring using state-of-the-art DSP techniques Fully VME-compatible slave interface Fully
Quad Low Offset, Low Power Operational Amplifier OP400
Data Sheet FEATURES Low input offset voltage: 5 µv maximum Low offset voltage drift over 55 C to 25 C:.2 μv/ C maximum Low supply current (per amplifier): 725 µa maximum High open-loop gain: 5 V/mV minimum
Wideband USB Synthesized Signal Generator. Dynamic range 70 db, output power from -60dBm to +10dBm in 0.25dB steps
Wideband USB Synthesized Signal Generator 50Ω -60 dbm to +10 dbm, 25-6000 MHz The Big Deal Wideband generator with 3 Hz frequency resolution 70dB adjustable output power range Internal pulse modulation
DDX 7000 & 8003. Digital Partial Discharge Detectors FEATURES APPLICATIONS
DDX 7000 & 8003 Digital Partial Discharge Detectors The HAEFELY HIPOTRONICS DDX Digital Partial Discharge Detector offers the high accuracy and flexibility of digital technology, plus the real-time display
Outer Diameter 23 φ mm Face side Dimension 20.1 φ mm. Baffle Opening. Normal 0.5 Watts Maximum 1.0 Watts Sine Wave.
1. MODEL: 23CR08FH-50ND 2 Dimension & Weight Outer Diameter 23 φ mm Face side Dimension 20.1 φ mm Baffle Opening 20.1 φ mm Height Refer to drawing Weight 4.0Grams 3 Magnet Materials Rare Earth Size φ 9.5
AP331A XX G - 7. Lead Free G : Green. Packaging (Note 2)
Features General Description Wide supply Voltage range: 2.0V to 36V Single or dual supplies: ±1.0V to ±18V Very low supply current drain (0.4mA) independent of supply voltage Low input biasing current:
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package
Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared
Field Calibration Software
SIGNAL HOUND Field Calibration Software User s Manual Version 1.1.0 7/8/2016 This information is being released into the public domain in accordance with the Export Administration Regulations 15 CFR 734
MADP-000504-10720T. Non Magnetic MELF PIN Diode
MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT
HIGH REPEATABILITY, BROADBAND TO-5 RELAYS DPDT SERIES RF00 RF00D RF00DD RF0 RF0D RF0DD RELAY TYPE Repeatable, RF relay Repeatable, RF relay with internal diode for coil transient suppression Repeatable,
High Speed, Low Cost, Triple Op Amp ADA4861-3
High Speed, Low Cost, Triple Op Amp ADA486-3 FEATURES High speed 73 MHz, 3 db bandwidth 625 V/μs slew rate 3 ns settling time to.5% Wide supply range: 5 V to 2 V Low power: 6 ma/amplifier. db flatness:
Silicon PIN Photodiode
Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near