PROMPT ENGINEERING & TRADING SERVICES CO. W.L.L P.O. BOX BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR

Transcription

1 This is to signify that PROMPT ENGINEERING & TRADING SERVICES CO. W.L.L P.O. BOX BARWA VILLAGE, WAKRA, BUILDING NO. 6 SHOP NO. 19 AND 20 DOHA QATAR Calibration Laboratory CL-165 has met the requirements of the IAS Accreditation Criteria for Calibration Laboratories (AC204), has demonstrated compliance with the ISO/IEC Standard 17025:2005, General requirements for the competence of testing and calibration laboratories, and has been accredited commencing, for the calibration discipline(s) listed in the approved scope of accreditation. The laboratory meets IAS program requirements in the field of calibration. Patrick V. McCullen Vice, Chief Technical Officer (see attached scope of accreditation for fields of calibration and accredited calibration methods) Print Date: 1/13/2015 Page 1 of 10

2 Prompt Engineering & Trading Services CO. W.L.L Ferdinand D. Borlongan P.O. Box Calibration / Quality Manager Barwa Village, Wakra, Building No. 6, Shop No. 19 and Doha Qatar AREA CAPABILITY 1 STANDARD, EQUIPMENT (CMC) (±) MECHANICAL Dimensional External Micrometer mm/0.01 mm mm/0.001 mm 6.05 µm 1.92 µm Using slip gauge set, optical parallel and optical flat Using Slip gauge set Caliper (Vernier/Dial/Electronics) mm/0.01 mm mm/0.02 mm 8.97 µm µm Using slip gauge set Using slip gauge set Height Gauge mm/0.01 mm mm/0.02 mm µm µm Using surface plate, slip gauge set and length bars Thickness Gauge 0 5 mm/0.001 mm 1.0 µm Using Slip gauge set 0 25 mm/0.01 mm 5.93 µm Using Slip gauge set 0 50 mm/0.01 mm 5.93 µm Using Slip gauge set Feeler Gauge mm 2.69 µm Using Digital Micrometer Standard Foils Up to 5000 m 2.63 µm Using Digital Micrometer Pressure (Pneumatic) Pressure and Vacuum Gauge (Dial/Digital) and Recorder/Pressure Transducer/Safety Valve 1 to 120 bar/0.01 bar 0.57% FS Using DH Budenberg P542 pneumatic calibrator (N 2 gas) Pressure and Vacuum Gauge (Dial/Digital) and Recorder/Pressure Transducer/Safety Valve 1 to 200 bar/0.01 bar 0.57% FS Fluke P M Comparator with Reference pressure gauge, Fluke 2700G G20M Pressure (Hydraulic) Pressure Gauge (Dial/Digital) and Recorder Pressure Transducer 0 to 140 bar/0.01 bar 140 to 1200 bar/0.1bar 0.39% FS Using DH Budenberg H542/409 hydraulic Deadweight Tester Print Date: 1/13/2015 Page 2 of 10

3 AREA MECHANICAL (continued) Vibration Vibration Meter/Analyzer Acoustic At Laboratory Sound Level Meter 10 m/s 2 NA 94 db and 1kHz NA CAPABILITY 1 (CMC) (±) 0.38 m/s db TECHNIQUE, REFERENCE STANDARD, EQUIPMENT Using Calibration exciter Type 4294, Bruel and Kjaer Make Using Cirrus research CR511F and CR514 acoustic calibrator Sound Level Calibrator 94 db and 114 1kHz, 0.1 db 1.37 db Using Cirrus CR306 sound level meter Velocity At Laboratory Hot Wire, Vane Type and Pitot Tube Anemometer THERMAL Temperature Controller/Indicator/Recorder/ with Sensor/Thermometer/Thermocouple/RTD Sensor/Temperature Gauge/Transmitter 2.5 m/s to 15 m/s 0.1 m/s 25 C to 150 C/0.001 C Using Vane anemometer: 0.55 m/s@15 m/s Using Pitot: 0.47 m/s@15 m/s 0.25C Using WTM 1000, Laboratory grade, Bench top mini wind tunnel, Omega make and reference anemometer and reference pitot tube Using FLUKE 9142 temperature calibrator with FLUKE 5615 PRT secondary standard Infrared Thermometer -15 C to 120 C/ 0.7C Using FLUKE 4180 IR calibrator Oven/Incubator/Freezer ELECTRICAL Source/Generate DC Current 195 C to 419 C/0.001 C 0 to µa/1 na 0 to ma/0.01 µa 0 to ma/0.1 µa 0 to ma/1 µa 0 to A/10 µa 1.1 to A/10 µa 0 to A/100 µa 11 to 20.5 A/100 µa 300 to 1000 A 0.63C 0.04% rdg 0.02% rdg 0.06% rdg 0.02% rdg 0.06% rdg 0.11% rdg 0.08% rdg 0.08% rdg 0.5% rdg Using FLUKE 9142 temperature calibrator with FLUKE 5615 PRT secondary standard Using FLUKE 5522 A multifunction calibrator direct method Using 50 Turn current coil Print Date: 1/13/2015 Page 3 of 10

4 AREA ELECTRICAL (continued) Source/Generate AC Voltage 1.0 mv to Hz to 500 Hz, /1 µv 33 V to Hz to 500 khz/1 µv 0.33 to Hz to 500 khz/10 µv 3.3 V to Hz to 100 khz/100 µv 33 V to Hz to 100 khz/1 mv 330 V to Hz to 10 khz/10 mv CAPABILITY 1 (CMC) (±) 0.137% rdg 0.104% rdg 0.08% rdg 0.08% rdg 0.08% rdg 0.063% rdg TECHNIQUE, REFERENCE STANDARD, EQUIPMENT AC Current to ma/0.01µa 0.33 to ma/0.01 µa 3.3 to ma/0.1 µa 0.09% rdg 0.110% rdg 0.266% rdg 33 to ma/1 µa 0.061% rdg 0.33 to A/10 µa 0.082% rdg 3 to 20.5 A/100 µa 0.188% rdg 300 to 1000 A /1 A 1.28% rdg Using 50 Turn current coil DC Voltage 0 to mv/0.1 µv 0.097% rdg 0 to V/1 µv 0 to V/10 µv 30 to V/100 µv 100 to V/1000 µv 0.059% rdg 0.059% rdg 0.015% rdg 0.015% rdg Using FLUKE 5522 A multifunction calibrator direct method Resistance (2 wire and 4 wire) 0 to / to / to / to / % rdg 330 to k / to k / % rdg Print Date: 1/13/2015 Page 4 of 10

5 AREA ELECTRICAL (continued) Source/Generate Resistance (2 wire and 4 wire) 3.3 to k / to k /0.01 CAPABILITY 1 (CMC) (±) 2.005% TECHNIQUE, REFERENCE STANDARD, EQUIPMENT 33 to k / to k / % rdg 330 k to M /1 1.1 to M / % Frequency 3.3 to M /10 11 to M /10 33 to M / to M / to 1100 M / % rdg 0.01 to Hz/0.01 Hz 0.01% rdg to Hz/0.1 Hz to khz/1.0 Hz to khz/10 Hz 0.011% rdg 0.289% rdg Capacitance to khz/100 Hz to MHz/1 khz 0.116% rdg 220 to pf/0.1 pf 0.4 to nf/0.1 pf 1.1 to nf/0.1 pf 3.3 to nf/0.1 pf 0.608% rdg 11 to nf/0.1 pf 33 to nf/1 pf 110 to nf/1 pf 0.33 to µf/10 pf 1.1 to µf/10 pf 3.3 to µf/100 pf 11 to µf/100 pf 33 to µf/1 nf 110 to µf/1 nf 0.33 to mf/10 nf 3.083% rdg Print Date: 1/13/2015 Page 5 of 10

6 AREA ELECTRICAL (continued) Source/Generate Temperature Simulation Temperature indicator/ /Controller/Recorder/Test Kit/ Universal Calibrator/Calibrators 200 to 800 o C, Pt 385,100 / -200 to 630 o C, Pt 3926, 100 / CAPABILITY 1 (CMC) (±) STANDARD, EQUIPMENT -200 to 630 o C, Pt 3916, 100 / -200 to 630 o C, Pt 385, 200 / -200 to 630 o C, Pt 385,500 / -200 to 630 o C, Pt 385, to 260 o C, PtNi 385, 120 (Ni120)/ -100 to 260 o C, Cu 427, 10 [3]/ 600 to 1820 C, B Type/ 0 to 2316 C, C Type/ 250 to 1000 C, E Type/ 210 to 1200 C, J Type/ 250 to 1372 C, K Type/ 200 to 900 C, L Type/ 200 to 1300 C, N Type/ 0 to 1767 C, R Type/ 0 to 1767 C, S Type/ 0.68 C 0.42 C 5522A multifunction calibrator direct method 5522A multifunction calibrator direct method 250 to 400 C, T Type/ 200 to 600 C, U Type Print Date: 1/13/2015 Page 6 of 10

7 AREA ELECTRICAL (continued) Measure CAPABILITY 1 (CMC) (±) STANDARD, EQUIPMENT DC Voltage 100 mv/100 nv 1 V/1 µv 0.006% rdg 10 V /10 µv 100 V/100 µv 1000 V/1 mv 0.02% rdg AC 50 Hz 100 mv/100 nv 1 V/1 µv 0.111% rdg 10 V/10 µv 100 V/100 µv 1000 V/1 mv 0.33% rdg DC Current 100 µa/100 pa 1 ma/1 na 10 ma/10 na 0.347% rdg 100 ma/100 na 1 A/1 µa 0.064% rdg 0.082% rdg 3 A/10 µa 10 A/10 µa 0.183% rdg 0.183% rdg AC 50 Hz 100 µa/100 pa 1 ma/1 na 10 ma/10 na 100 ma/100 na 0.423% rdg 1 A/1 µa 3 A/10 µa 10 A/10 µa 0.163% rdg 0.285% rdg 0.285% rdg Print Date: 1/13/2015 Page 7 of 10

8 AREA ELECTRICAL (continued) Measure Resistance 10 /10 µ 100 /100 µ 1 k /1 m CAPABILITY 1 (CMC) (±) 0.358% rdg 0.023% rdg 0.023% rdg STANDARD, EQUIPMENT 10 k /10 m 100 k /100 m 1 M /1 10 M / % rdg 0.073% rdg 0.073% rdg 0.073% rdg 100 M / G /1k 1.369% rdg 1.369% rdg Frequency 5 Hz to 1 MHz 0.116% rdg Temperature (RTD Pt 100) 200 C to 600 C 0.26 C Capacitance TEMPERATURE---MEASURE Temperature Indicator/Controller/Recorder/Test Kit/Universal Calibrator/Calibrators 1 nf to 1 F 1 F to 100 mf 200 to 800 o C, Pt 385, to 630 o C, Pt 3926, to 630 o C, Pt 3916, % rdg -200 to 630 o C, Pt 385, to 630 C, Pt 385, to 630 C, Pt 385, to 260 C, PtNi 385, 120 (Ni120) / -100 to 260 C, Cu 427, 10 [3]/ 0.46 C Using FLUKE and 5522A multifunction calibrator Measure Mode Print Date: 1/13/2015 Page 8 of 10

9 AREA TEMPERATURE MEASURE (continued) Temperature Indicator/Controller/Recorder/Test Kit/Universal Calibrator/Calibrators 600 to 1820 C, B Type 0 to 2316 C, C Type 250 to 1000 C, E Type 210 to 1200 C, J Type 250 to 1372 C, K Type CAPABILITY 1 (CMC) (±) STANDARD, EQUIPMENT 200 to 900 C, L Type 200 to 1300 C, N Type 0 to 1767 C, R Type 0 to 1767 C, S Type 250 to 400 C, T Type 200 to 600 C, U Type -200 to 630C, Pt 385, to 630 C, Pt 385, C Using FLUKE and 5522A multifunction calibrator Measure Mode Print Date: 1/13/2015 Page 9 of 10

10 AREA Electrical (continued) Temperature Measure Temperature Indicator/Controller/Recorder/Test Kit/Universal Calibrator/Calibrators -80 to 260 C, PtNi 385, 120 (Ni120) -100 to 260 C, Cu 427, 10 [3] 600 to 1820 C, B Type 0 to 2316 C, C Type 250 to 1000 C, E Type 210 to 1200 C, J Type 250 to 1372 C, K Type 200 to 900 C, L Type 200 to 1300 C, N Type 0 to 1767 C, R Type 0 to 1767 C, S Type 250 to 400 C, T Type 200 to 600 C, U Type CAPABILITY 1 (CMC) (±) 0.46 C STANDARD, EQUIPMENT Using FLUKE and 5522A multifunction calibrator Measure Mode 1 Calibration and Measurement Capability is the smallest uncertainty of measurement that a laboratory can achieve within its scope of accreditation when performing more or less routine calibrations of nearly ideal measurement standards or of nearly ideal measuring instruments. Calibration and Measurement Capabilities are expressed as uncertainties at approximately the 95% level of confidence, usually using a coverage factor of k=2. The measurement uncertainty of a specific calibration performed by the laboratory may be greater than the least uncertainty due to the behavior of the customer s device, to the environment (if the calibration is performed in the field), and to influences from the circumstances of the specific calibration. Print Date: 1/13/2015 Page 10 of 10