UHMPE. II- 150 ST 1000 VLAKKE BAND PRODUIT STRIPS - SKIVED WEAR STRIPS - SKIVED
|
|
|
- Phillip Parrish
- 7 years ago
- Views:
Transcription
1 VLAKKE BAND PRODUIT STRIPS - SKIVED WEAR STRIPS - SKIVED DIN 8187 Max. breedte / largeur / width : 300 mm Max. dikte / épaisseur / thickness : mm BANDMATERIAAL - GEEXTRUDEERD PRODUIT BANDES - EXTRUDÉS WEARSTRIPS - EXTRUDED II- 150
2 GEEXTRUDEERDE Z-PROFIELEN PROFILS Z EXTRUDES EXTRUDED Z-PROFILES II - 151
3 GEEXTRUDEERDE L-PROFIELEN PROFILS L EXTRUDES EXTRUDED L-PROFILES II- 152
4 GEEXTRUDEERDE KLEMPROFIELEN PROFILS PINCE EXTRUDES EXTRUDED CLAMP-PROFILES II - 153
5 GEEXTRUDEERDE KLEMPROFIELEN PROFILS PINCE EXTRUDES EXTRUDED CLAMP-PROFILES II- 154
6 GEEXTRUDEERDE T-PROFIELEN PROFILS T EXTRUDES EXTRUDED T-PROFILES II - 155
7 GEEXTRUDEERDE T-PROFIELEN PROFILS T EXTRUDES EXTRUDED T-PROFILES II- 156
8 GEEXTRUDEERDE U-PROFIELEN PROFILS U EXTRUDES EXTRUDED U-PROFILES II - 157
9 GEEXTRUDEERDE U-PROFIELEN PROFILS U EXTRUDES EXTRUDED U-PROFILES II- 158
10 GEEXTRUDEERDE U-PROFIELEN PROFILS U EXTRUDES EXTRUDED U-PROFILES II - 159
11 ST 1000 GEEXTRUDEERDE C-PROFIELEN PROFILS C EXTRUDES EXTRUDED C-PROFILES II- 160
12 GEEXTRUDEERDE C-PROFIELEN PROFILS C EXTRUDES EXTRUDED C-PROFILES II - 161
13 GEEXTRUDEERDE C-PROFIELEN PROFILS C EXTRUDES EXTRUDED C-PROFILES II- 162
14 GEEXTRUDEERDE ZIJ-PROFIEL PROFILS LATERAL EXTRUDES EXTRUDED SIDE GUIDE PROFILE II - 163
15 GEEXTRUDEERDE VIERKANT-PROFIEL PROFILS CARRÉS EXTRUDES EXTRUDED SQUARE-PROFILES II- 164
16 GEEXTRUDEERD CLIP-PROFIEL PROFILS CLIPSABLES EXTRUDES EXTRUDED CLIP-PROFILE II - 165
17 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II- 166
18 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II - 167
19 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II- 168
20 ST 1000 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II - 169
21 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II- 170
22 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II - 171
23 GEEXTRUDEERDE SPECIALE PROFIELEN PROFILS SPÉSIAL EXTRUDES EXTRUDED SPECIAL-PROFILES II- 172
guides pag. 115 pag. 112 pag. 113 pag. 114 pag. 116 pag. 109 pag. 119 pag. 118 pag. 120
1 september pag. 8 pag. 8 pag. 8 pag. 8 pag. 9 pag. 9 guides pag. 9 pag. 9 pag. 1 pag. 1 pag. 1 pag. 1 pag. 111 pag. 111 pag. 111 pag. 111 pag. 112 pag. 112 pag. 112 pag. 11 pag. 11 pag. 11 pag. 114 pag.
Wido-Frame The assemblage of façade slabs on an aluminium frame
Wido-Frame The assemblage of façade slabs on an aluminium frame Dimensions of Laminam slabs (mm) Width Height 3000 1000 Type LAMINAM 3+ 3,5 Thickness of Laminam slabs Thickness Characteristics A 3.5mm-thick
Wido-Frame - the frame assemblage system
Wido-Frame The assemblage of façade slabs on an aluminium frame Laminam ceramic facade slabs Dimensions of Laminam slabs (mm) Width 3000 Height 1000 Type Thickness LAMINAM 3+ 3,5 LAMINAM 5+ 5,5 A 5.5mm-thick
STRUCTURAL STEELS. Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4
STRUCTURAL STEELS Steel Grades S185 S235JR S235JRG2 S235JO S235J2G3 S235J2G4 S275JR S275JO S275J2G3 S275J2G4 S355JR S355JO S355J2G3 S355J2G4 S355K2G3 S355K2G4 E295 E335 E360 STRUCTURAL STEELS The unalloyed
Out - Serge 600 / 002006 White Yellow
Out - Serge 600 / 002006 White Yellow front: back: Widths 250 cm 270 cm 320 cm TECHNICAL SPECIFICATION STANDARD RESULT composition Fibreglass 42% - PVC 58% openness factor NBN EN 410 5.00% weight NF EN
( ) = ( ) = {,,, } β ( ), < 1 ( ) + ( ) = ( ) + ( )
{ } ( ) = ( ) = {,,, } ( ) β ( ), < 1 ( ) + ( ) = ( ) + ( ) max, ( ) [ ( )] + ( ) [ ( )], [ ( )] [ ( )] = =, ( ) = ( ) = 0 ( ) = ( ) ( ) ( ) =, ( ), ( ) =, ( ), ( ). ln ( ) = ln ( ). + 1 ( ) = ( ) Ω[ (
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Re-board Accessories
Re-board Accessories Plastic Screws Plastic screws specially developed for 16 mm Re-board, but works with most thicknesses. A special version comes with a loop for hanging (only available in transparent
Out - Serge 600 / 001061 Grijs Wit-Parelgrijs
Out - Serge 600 / 001061 Grijs Wit-Parelgrijs front: back: Breedtes 160 cm 190 cm 220 cm 250 cm 270 cm 320 cm TECHNISCHE SPECIFICATIE STANDAARD RESULTAAT compositie Fibreglass 42% - PVC 58% openness factor
InForm Tables and Base Cabinets
System tables 30 mm thick, coated with laminate, selection of 3 different front edges: Postformed edge, 70 mm high Edge band, 3 mm thick FlexiLine edge, replaceable. Permitted surface load on the tabletop:
PRODUCT SPECIFICATION
PRODUCT SPECIFICATION Brand C.K Product Range SensoPlus VDE Pliers Catalogue number 341 & 39071 Date 10/10/2007 Range Description A range of VDE approved Professional Electricians Pliers and cutters Range
HOBBING MACHINE TYPE ZFWZ 8000x40
Inventory number 416/635 Year of production 1973 Serial number 7160 HOBBING MACHINE TYPE ZFWZ 8000x40 Application The machine is provided for milling cylindrical, helical and helix cogwheels. The tooth
Company and Product Presentation
Company and Product Presentation Company Presentation NBG Systems & FCT are private companies owned by NBG Holding Both are Austrian companies, operating under the highest European Union requirements &
DECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
6500, 6600, 6602. Components. Exploded View ELECTRIC WINTERGARDEN SYSTEM ELECTRIC WINTERGARDEN SYSTEM # 6500, 6600, 6602. 6500-T-00 EU (tandem)
Components Exploded View Product design and specification changes reserved. 6500-10 / 6600-10 / 6602-10 When for self assembly: -Select motor set: -Profile -Drive belt -Component parts: see Curtain transport,
MAMMUT CERTIFICATE. department store. GUARANTEE* private commercial COMMERCIAL 33 USE CLASS PER EN 685 33 ABRASION CLASS AC 5 EXAMPLE OF APPLICATION
RTIFICATE MAMMUT USE CLASS PER EN 685 33 ABRASION CLASS AC 5 department store LENGTH 1845 mm WIDTH 188 mm THICKNESS 12 mm BOX 4 panels / 1.387 m 2 PALLET 56 boxes / 77.697 m 2 COMMERCIAL 33 30 years 5
DECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
PC 4/ 5-STF-7,62. Extract from the online catalog. Order No.: 1828278
Extract from the online catalog PC 4/ 5-STF-7,62 Order No.: 1828278 The figure shows a 5-pos. version of the product Plug component, Nominal current: 20 A, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of
Flügelsprosse 70/70 4K Vent sash bar 70/70 4K Traverse d ouvrant 70/70 4Ch. Parteluz 70/70 4K 18520...
Flügelsprosse / 4K Vent sash bar / 4K Traverse d ouvrant / 4Ch. Parteluz / 4K 18520... 24 Corona CT AS T-Profile Corona CT AS T profiles Profilés de traverse Corona CT AS Perfiles en T Corona CT AS 20259300.5
H45 LED - Direct and indirect pendant
RAL 01 10 00 IP 20 230V 50/60Hz Specifications Direct and indirect light pendant linear luminaire. Aluminium profile. Diffusers in frosted polycarbonate profile. Driver included. Supplied with clear base,
TRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS
TRUSTED SOLUTIONS AND INNOVATION WEAR PRODUCTS Inch & Metric Sizes Self-Lubricating & Standard Models 1 WEAR PRODUCTS Service We Deliver and Quality You Can Depend On DANLY IEM is a leading manufacturer
sunscreen interior inside solar protection
sunscreen interior in solar protection OF: % openheid % of holes % d ouverture TS: % zonne toelaatbaarheid % of transmitted solar energy % d énergie solaire transmise TS TV: % zichtbare lichttransmissie
Security steel door dw 52-1 Teckentrup DF WK 2 optionally with glazing/ventilation grille
Security steel door dw 52-1 Teckentrup DF WK 2 optionally with glazing/ventilation grille Text example Compile and tender according to requirements. Please refer to technical data below for respective
FASTON Terminals and Connectors
Introduction Product Facts Straight, right-angle and receptacle-tab combinations available Receptacles available for 6.3 mm, 4.8 mm and 2.8 mm tab size (.250,.187 and.110 Series) Receptacles mate with
KENNIS R-40 TECHNISCHE SPECIFICATIE / TECHNICAL SPECIFICATIONS
KENNIS R-40 TECHNISCHE SPECIFICATIE / TECHNICAL SPECIFICATIONS Technische data, Technical data, R-40/75-3 R-40/87-4 R-40/100-3 R-40/120-4 Maximaal dynamisch moment, Max dynamic moment Maximale steunpoot
Ammeraal Beltech Modular
Ammeraal Beltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni Flex SNB C 2.3 page 3-10 uni Flex SNB C 1.6 page 11-18 uni Flex SNB 2.3 page
PLASTIC VOLUME CONTROL DAMPERS OVERVIEW TYPE: GGB
OVERVIEW TYPE: GGB All composite construction Rigid extruded upvc aerofoil blade section Integral blade seals for low leakage operation Individual blades driven via reinforced styrene gear wheels in maintenance
Les Produits MURPHCO Ltée
DESCRIPTION The Murphco support clamp is an assembly made entirely of stainless steel and conceived for all sleeved roof drains. The Murphco Support Clamp is compatible with all types of Murphco* copper
Test report No. 20-20/06
PIV Pr üfinstitut Schlösser und Beschläge Velbert Wallstraße 41 D-42551 Velbert Tel. +49 (0) 2051-9506-5 Fax +49 (0) 2051-9506-69 Test report No. 20-20/06 1. Client and manufacturer DIRAK GmbH&Co.KG 58256
MagTek A. Aluminium Manual Attack Resistant Doors
MagTek A Aluminium Manual Attack Resistant Doors MANUAL ATTACK-RESISTANCE Gunnebo s manual attack resistant doors have been designed to satisfy the ever increasing need to protect people, property and
Ammeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com Content uni MP C page 3-6 uni MP 16% page 7-10 uni MP 18% page 11-14 uni MP 20% page 15-18
Spiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
Feed-through terminal block - SSK 110 KER-EX - 0502058
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid
MATHEMATICS FOR ENGINEERING BASIC ALGEBRA
MATHEMATICS FOR ENGINEERING BASIC ALGEBRA TUTORIAL 4 AREAS AND VOLUMES This is the one of a series of basic tutorials in mathematics aimed at beginners or anyone wanting to refresh themselves on fundamentals.
Sliding and Folding Door Fittings Sliding Door Accessories
Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:
LINE LIN08 856 824 - - 1105 70.5 0.350 7 LIN13 1256 824 - - 1105 91.5 0.488 8 LIN15 1656 824 - - 1105 112.0 0.637 12
30 31 RECEPTION DESK SYSTEMS / EMPFANGSTHEKEN-SYSTEME / CONFIGURATIONS DES BANQUES 08 08 LIN08 856 824 - - 1105 70.5 0.350 7 12 13 LIN13 1256 824 - - 1105 91.5 0.488 8 15 LIN15 1656 824 - - 1105 112.0
A pro s guide to photo prints on Alu-dibond
A pro s guide to photo prints on Alu-dibond The way for professional photographers to get the best results out of Alu-dibond XXLPIX 2013 For professional photographers only Table of content Alu-Dibond...3
12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
maxiflex Party and Exhibition Hall Type: 10.5/340 Model: 170
Type: 10.5/340 Model: 170 10.18 m 3.26 m Ridge height (D) 4.91 m 4-groove aluminium hollow profile - m Truss-distance (B3) Ground Anchoring Longest component 5.31 m Min. length 10.00 m Type: 10.5/400 Model:
1 Introduction - Advice... 2. 2 Conductor Rails... 3. 3 Track Coupler... 4. 4 Power feeds... 5. 5 Air Gap Insulation Section... 6
Contents 1 Introduction - Advice... 2 2 Conductor Rails... 3 3 Track Coupler... 4 4 Power feeds... 5 5 Air Gap Insulation Section... 6 6 Expansion joints... 7 7 Anchor Caps... 8 8 End Caps (Distance between
DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.: 2964050
Extract from the online catalog DEK-REL- 24/1/SEN Order No.: 2964050 Relay terminal block for sensor, with soldered-in miniature relays, contact (AgNi+Au): small to medium loads, 1 N/O contact, input voltage
Automatic Wheel Profile Measuring Device for Tramway Vehicles
Automatic Wheel Profile Measuring Device for Tramway Vehicles Technical description The automatic wheel profile measuring device is used to measure the wheel profile and diameter whilst a tramway vehicle
DESIGN OF SLABS. Department of Structures and Materials Engineering Faculty of Civil and Environmental Engineering University Tun Hussein Onn Malaysia
DESIGN OF SLABS Department of Structures and Materials Engineering Faculty of Civil and Environmental Engineering University Tun Hussein Onn Malaysia Introduction Types of Slab Slabs are plate elements
PC 4/ 3-G-7,62. Extract from the online catalog. Order No.: 1804807
Extract from the online catalog PC 4/ 3-G-7,62 Order No.: 1804807 The figure shows a 5-pos. version of the product Header, Nominal current:, Nom. voltage: 400 V, Pitch: 7.62 mm, Number of positions: 3,
DECORATIVE RANGES PENDANTS FLUSH FITTINGS WALL LIGHTS TABLE & FLOOR BATHROOM SPOTLIGHTS & DOWNLIGHTS LED STRIPLIGHTS OUTDOOR LED LIGHTING
DECORATIVE RANGES PENDANTS FLUSH FITTINGS WALL LIGHTS TABLE & FLOOR BATHROOM SPOTLIGHTS & DOWNLIGHTS LED STRIPLIGHTS OUTDOOR LED LIGHTING LOW ENERGY LIGHTING LAMPS 185 LED Fixed Fixed Colour Flexi Colour
Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance
![Taps up to M20 [3/4] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance](/thumbs/39/20152487.jpg "Taps up to M20 [3/4] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with little maintenance")
www.danly.com TRUSTED SOLUTIONS AND INNOVATION Max Control TM Servo-Drive In-Die Tapping Units Taps up to M20 [3/4"] Multiple tap applications Taps up to 150 strokes per minute Taps millions of parts with
valid as of 1 April 2014 Fradiflex metal water stop
FRANK Product List valid as of 1 April 2014 Fradiflex metal water stop Fradiflex metal water stop Stremafl ex Controlled crack component Sealing of joints in concrete structures requires a very reliable
Aufenacker plastic panelling as a partition wall
Aufenacker GmbH & Co. KG Aufenacker plastic panelling as a partition wall DLG Test Report 5363 Short description Manufacturer and registering company Aufenacker GmbH & Co. KG Im Geer 11 D-46419 Isselburg
Out - Ecrano / 002010 White Charcoal
Out - Ecrano / 002010 White Charcoal front: back: Widths 270 cm TECHNICAL SPECIFICATION STANDARD RESULT composition Glassfibre 42% - PVC 58% openness factor NBN EN 410 2.00% weight NF EN 12127 650.00g/m²
Ticket Reader with real time clock and magnetic encoding
Ticket Reader with real time clock and magnetic encoding Order number: TL-31 The Ticket Reader TL 31 consists of the multifunctional MODPARK ticket modules integrated into a housing, which is well suited
V80 HEAD DETAIL - SECTION VIEW DRAWING SCALE 1:2. Dwg. No. V10101. 13mm min. 85mm. 72mm 95mm 65mm. 26mm. 10mm 60mm 75mm. 135mm.
13mm min. 72mm 95mm 65mm 85mm 26mm 10mm 60mm 75mm 135mm 145mm V80 HEAD DETAIL - SECTION VIEW Dwg. No. V10101 Manually operated blind with gearbox showing 90 & 45 degree crank penetrations in section view.
INDEX. Chapter8. air master. Perforated Ceiling Diffusers
Chapter8 INDEX A. Perforated ceiling diffuser 1. Perforated ceiling diffuser with plenum box..: APCD+P...8.1. Perforated ceiling diffuser with damper....: APCD...8. Standard sizes...8. Fixing details...8.
WTW SWANTM. Linear slot air diffusers of wall-to-wall design for ceilings
SWANTM WTW Linear slot air diffusers of wall-to-wall design for ceilings Quick facts Wall-to-wall installation Diffuser face of light aluminium design 2, 3 or slots Horizontal/vertical air distribution
Installation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
SUNPAL Multiwall Polycarbonate Standing-Seam Architectural System
SUNPAL Multiwall Polycarbonate Standing-Seam Architectural System Technical Guide Creating New Solutions for over 40 Years www.palram.com Contents Page Introduction 3 Panel Specification 4 Colors and Solar
#25 The Basics of Lightweight Conveyor Belting
#25 The Basics of Lightweight Conveyor Belting The overall belting market share for lightweight conveyor belting has increased modestly over the past couple of decades. The primary reasons for the increase
This attractive cover system has been designed to complement the Pipe Cover and Skirting Cover product ranges.
Box Cover This attractive cover system has been designed to complement the Pipe Cover and Skirting Cover product ranges. Talon Box Cover profile is offered in a range of sizes and is ideal in situations
GUARDRAIL POST STEEL
GUARDRAIL POST STEEL Guardrail posts meeting materials certification are evaluated and checked for: 1. Dimensional acceptance 2. Physical test results a. Chemical b. Physical 3. Galvanized or painted coating
Electronic housing BC for distributor boards
Electronic housing BC for distributor boards The requirements of modern building automation grow constantly and change with regard to comfort, control, intelligent linking of systems and their communication
Order steps & the meaning of the options:
Readme before ordering PCB online V1.3.3 Content Order steps & the meaning of the options:... 1 PCB specification... 5 Order steps & the meaning of the options: First. Choose The right quantity of the
Wear-resistant steel grades. Hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.com/steel
Wear-resistant steel grades Hot-rolled steel strip and heavy plate Josef Elmer, Key Account Manager voestalpine Steel Division www.voestalpine.com/steel For the highest stress Highest resistance to wear
ELECTROMAGNETIC DISC BRAKES
ELECTROMAGNETIC DISC BRAKES TYPE 66E 15/30 52.121 Hand release Lining wear adjustment Torque adjustment 4 holes ø13 DISC SIZE Ø A Braking torque Nm Regulated from (40-100%) Reaction on the shaft N Control
CONTENTS PRODUCTS SET-UP 3D DRAWING TEMPLATES SOLUTIONS 1... 3 PANEL SYSTEM 2... HARD CASE & BAGS
Made in UK CONTENTS PRODUCTS 1... 3 PANEL SYSTEM Welcome to the dealer pack! 2... HARD CASE & BAGS The banner stand is a unique exhibition product manufactured in the UK. It was developed to offer a legitimate
Technical specification bucket JET 53 P
Technical specification bucket Jokey Euro Tainer Profi D1: 227,0 mm D2: 21 D3: 192,0 mm H: 18 basic data volume to rim: 5,70 l handle types tolerances 143,0 g metal handle 21,0 g : plastic handle 10,0
Chapter 30: How to import a DWG drawing not created with MasterChef
Chapter 30: How to import a DWG drawing not created with MasterChef Launch MasterChef from the icon on your desktop. Note: If you are using a demo version, once loaded the program, a message will notify
YouthQuest Quick Key FOB Project
YouthQuest Quick Key FOB Project This project is designed to demonstrate how to use the 3D design application, Moment of inspiration, to create a custom key fob for printing on the Cube3 3D printer. Downloading
natures impression Primero & Ultimo collection overview
natures impression Primero & Ultimo collection overview Primero Primero Thickness / wearlayer: 2 mm / PU 0,30 mm 4,5 mm / PU 0,30 mm CASABLANCA OAK 24220 16,3 x 98,8 cm CASABLANCA OAK 24234 16,3 x 98,8
Worth noting. Use. Key figures. Installation. lindab atrium - loggia
Contact, Overview, Index Guideline heating and cooling Plexus Professor / Professor Plus Premum / Premax / Solus Architect Polaris I & S Plafond Podium Celo Cabinett Capella Carat Fasadium Atrium / Loggia
Beef Primal Cuts OUTSIDE FLAT 2050 OUTSIDE 2030
Beef Primal Cuts OUTSIDE FLAT 2050 OUTSIDE 2030 EYE ROUND 2040 SILVERSIDE 2020 TOPSIDE 2000 KNUCKLE 2070 THICK FLANK 2060 TOP SIRLOIN 2120 RUMP 2090 FLANK STEAK 2210 TENDERLOIN 2150 (Side strap on) D-RUMP
HOW TO INSULATE A CRAWLSPACE
HOW TO INSULATE A CRAWLSPACE Many homes throughout the United States have what are commonly referred to as crawlspaces. Crawlspaces are open spaces underneath a portion of a home. They are very common
Guide to working on Public Sewers
Guide to working on Public Sewers affected by Building Works Introduction Severn Trent Water Ltd requires the work to be done in order to protect the public sewer and minimise the risk of us having to
Tyre Awareness Training
Tyre Awareness Training Tyre Law Tread depth Tyres on cars, light vans (not exceeding 3,500kg gross weight) and light trailers must have a tread depth of at least 1.6mm across the central three-quarters
Checking Wheel Brakes Wear
Issue 1 en 1 Checking Wheel Brakes Wear Contents Disc Brakes... 3 Removing the wheels... 4 Checking the Brake Pads... 5 Check brake disc thickness... 7 Checking brake disc for cracks... 8 Drum Brakes...
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Agenda Dubuc works: location and overview MMC fabrication process at Rio Tinto Alcan Boralcan product caracteristics
VBA Macro for construction of an EM 3D model of a tyre and part of the vehicle
VBA Macro for construction of an EM 3D model of a tyre and part of the vehicle Guillermo Vietti, Gianluca Dassano, Mario Orefice LACE, Politecnico di Torino, Turin, Italy. guillermo.vietti@polito.it Work
ZMR 80 STEREO MODULAR ZONER USERS MANUAL
ZMR 80 STEREO MODULAR ZONER USERS MANUAL Lime Technologies http://limetechnologies.co.uk Tel: 08712 233127 ZMR80 Stereo Modular Zoner Mixer Introduction The modular construction of the ZMR80 allows it
China Yangzhou plant
China Yangzhou plant TM Marcegaglia China 714,000 sqm total area 153,000 sqm first phase covered area EN norms production quality standards Precision tubes from carbon and stainless steel Beijing Yangzhou
Journal bearings/sliding bearings
Journal bearings/sliding bearings Operating conditions: Advantages: - Vibration damping, impact damping, noise damping - not sensitive for vibrations, low operating noise level - dust tight (if lubricated
Knürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
ADDA FERreport JANUARY 2015
ADDA FERreport JANUARY 2015 REPORT 2015 PREVIEW COMPLETE TUBE MILL TM8 FOR VIETNAM FABTECH & METAL EXPO 2014 JANUARY 2015 2015 PREVIEW The year 2014 has closed in a positive way for Adda Fer Meccanica,
KNOW YOUR OPTIONS: 69 KV XLPE POWER CABLE
Know Your Options: 69 kv XLPE Power Cable 3 material and size material is a matter of both customer preference and required current carrying capacity Copper conductor common for larger loads When both
Rubber Lining for Projects
Rubber Lining for Projects Trelleborg Rubber Lining - the ONE safeguard for wear and corrosion protection Trelleborg Rubber Linings can be applied to many surfaces to significantly reduce abrasive wear,
% Si Fe Cu Mn Mg Cr Zn Ti Others Others. Europe USA Spain France Germany G.B. Italy Sweden Switzerland Japan. ALMgSi1 3.3215 H30
ALUMINIUMS Alloys Aluminium - Magnesium - Silicon 6082 % Si Fe Cu Mn Mg Cr Zn Ti Others Others Minimum 0,70 0,40 0,60 Each Total Maximum 1,30 0,50 0,10 1,00 1,20 0,25 0,20 0,10 0,05 0,10 Europe USA Spain
European Technical Assessment ETA-15/0652 of 27/10/2015
ETA-Danmark A/S Göteborg Plads 1 DK-2150 Nordhavn Tel. +45 72 24 59 00 Fax +45 72 24 59 04 Internet www.etadanmark.dk Authorised and notified according to Article 29 of the Regulation (EU) No 305/2011
SILENT DECONSTRUCTION TOOLS
SILENT DECONSTRUCTION TOOLS Our cutters, steel shears, pulverizers, grapples, bucket crushers and magnets offer a great combination of high and constant cutting forces, short cycle times and high availability
ANALYSIS OF ELEMENT SHAPE IN THE DESIGN FOR MULTI-BAND APPLICATIONS
ANALYSIS OF ELEMENT SHAPE IN THE DESIGN FOR MULTI-BAND APPLICATIONS Pidugu Prasad 1, D Vakula 2 1 M.Tech, Dept. of Electronics and Communication Engineering, NIT Warangal, A.P, India 2 Assistant Professor,
Operating Manual UWAPS-TINY Series
Operating Manual UWAPS-TINY Series Powecon Oy WWW.POWECON.FI 1/9 Table of content 1 Warranty...3 2 Safety information...3 3 Abbreviations and terminology...3 4 List of appendices...4 5 Introduction...4
COB panel supports for multipole connectors
TCQ + TSFS (...CMS, alternative) CMS TSFS Use The system makes it possible to use multipole connectors within electric panels without the traditional metallic housing as protection is assured by the electric
ADVANTAGES OF MODULAR LAYOUT
Brick Modules Section 2.1.3 Page 1 ADVANTAGES OF MODULAR LAYOUT Where possible, it is desirable to lay out the brickwork according to the module of the brick being used - both in length and in height.
Skaltek Midi Pac. The Optimal Package? PI 22.01
012 PI 22.01 The Optimal Package? Skaltek Midi Pac Skaltek AB, DeltaPark Kungsvägen 10, 196 30 Kungsängen, Sweden, Tel +46 8-584 505 00 Fax +46 8-584 505 50, www.skaltek.com 1. Skaltek Midi Pac was developed
Contents. ELATECH Polyurethane belts 2. ELATECH M and V 3. ELA-flex SD Polyurethane belts 95. Polyurethane belts for conveying applications 125
ELATECH Polyurethane belts 2 Introduction to ELATECH polyurethane belts 2 Page Contents ELATECH M and V 3 Introduction 4 Tension cords 4 Products certifications 4 Mechanical and chemical properties 4 Executions
HJK CONSULTING ENGINEERS. Project Management Technology Operating Consulting Excellence
HJK CONSULTING ENGINEERS Project Management Technology Operating Consulting Excellence COLD ROLLING MILL EQUIPMENT HJK Consulting Engineers is supporting its client in sales of the following southern Europe
MultiPost-AP anchorage device
MultiPost-AP anchorage device MultiPost anchorage point Type 1 Fixing on reinforced concrete with large, 360 rotating stainless steel lifting eye for the simultaneous securing of max. 2 persons. This can
SCHLUTER -KERDI-BOARD
SCHLUTER -KERDI-BOARD S U B S T R AT E S U B S T R AT E, B U I L D I N G PA N E L, B O N D E D W AT E R P R O O F I N G Application and Function 12.1 Schluter -KERDI-BOARD Schluter -KERDI-BOARD is a multifunctional
Cable drag chain, type MP 41.2
2 nd Generation Damaskus Maskinskydd AB Anläggarvägen 2 SE-136 44 Handen SWEDEN Phn: +46 (0)8 556 505 20 www.damaskus.se Properties and application areas The MP 41.2 of the PowerLine series is a plastic
ANTIFRICTION BIMETAL MATERIALS AND COMPONENTS. Company Presentation www.bimetech.com
ANTIFRICTION BIMETAL MATERIALS AND COMPONENTS Company Presentation Company overview Production plant located in Torre Can.se (TO) - ITALY History and Company Presentation The history of BIMETECH S.r.l
UGVCL/SP/591/11KV HT AB CABLE
TECHNICAL SPECIFICATION FOR 11KV AERIAL BUNCHED CABLES FOR OVERHEAD LINES (CROSSED LINKED POLYTHENE DRY GAS CURED) 1. SCOPE This specification covers requirements of XLPE insulated, 11 KV Aerial Bunched
TENSIONMETER ** code 183_LNRSTW **
Electronic tension meter for applications in textile and wire industry. 9 Tension ranges from 0.1-200 cn to 5-50 dan. Versatile instruments usable for applications in textile industry: e. g. 50 up to max.