Z-TRAUQ INC. Tel.: (450) Fax: (450)

Transcription

1 CURRENT TRANSFORMER MODEL J " x 7" PAGE No 2-2 REV 8DEC00 TERMINAL OPTION LEAD WIRE OPTION 8-2 BRASS SCREW TERMINALS (2 PLACES) SEE NOTE Ø 2 9 (4 PLACES) UL 05 #6 AWG LEAD WIRE, STANDARD LENGTH IS 24" H H X OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER NOTES ). ALL DIMENSIONS IN INCHES 2). ALL DIMENSIONS REF ONLY ). HT = -/2 FOR RATIOS UP TO 750:5A HT = -/8 FOR RATIOS 750:5A to 000:5A HT = -/8 FOR RATIOS ABOVE 000:5A Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic UL and Canadian UL Recognized Component. File E575 Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available., 0.2, and 0. A output at F.S. primary amperage. Other nonstandard ratings also available 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types Thermal ratings above. for selected ratios. Available with BB4 bus bar brackets. See Bracket Data Section for dimensions.

2 " x 7" PAGE No 2- CURRENT TRANSFORMER MODEL J REV 8DEC TYPICAL EXCITATION CURVE for MODEL J at 60HZ 0 INDUCED VOLTAGE (volt) :5 2500:5A 000:5A 200:5A 500:5A 0:5 400:5A EXCITING CURRENT (amp) NUMBER * J xxx J xxx J xxx J-0-00-xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx RATIO 400:5A 500:5A 600:5A 0:5A 200:5A 500:5A 600:5A 2500:5A 000:5A 60HZ ± % BURDEN (VA) NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

3 CURRENT TRANSFORMER MODEL J -/4" x -/4" PAGE No 2-4 REV 8DEC BRASS SCREW TERMINAL (2 PLACES) -/ Ø 2 9 (4 PLACES) H -/4 -/4 5 6 X NOTES ). ALL DIMENSIONS IN INCHES 2). ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available. A output at F.S. primary amperage. Other non-standard ratings also available Thermal ratings above. for selected ratios 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types Available with B7 bus bar brackets. See Bracket Data Section for dimensions.

4 -/4" x -/4" PAGE No 2-5 CURRENT TRANSFORMER MODEL J REV 8DEC00 TYPICAL EXCITATION CURVE for MODEL J at 60HZ 0 INDUCED VOLTAGE (volt) :5A 000:5A 200:5A 6000:5 4000:5 2500:5A 500:5A 0:5 500:5A EXCITING CURRENT (amp) NUMBER * J xxx J-0-00-xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx RATIO 500:5A 0:5A 200:5A 500:5A 2500:5A 000:5A 8000:5A 60HZ ± % BURDEN (VA) NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

5 CURRENT TRANSFORMER MODEL J5 -/2" x 4-/4" PAGE No 2-6 REV 8DEC BRASS SCREW TERMINAL (2 PLACES) Ø 4 (4 PLACES) H X NOTES:.)ALL DIMENSIONS IN INCHES 2.)ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available. Custom lead wire lengths and types A output at F.S. primary amperage. Other non-standard ratings also available Thermal ratings above. for selected ratios 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires

6 -/2" x 4-/4" PAGE No 2-7 CURRENT TRANSFORMER MODEL J5 REV 8DEC00 0 TYPICAL EXCITATION CURVE FOR MODEL J5 at 60HZ 0 2 INDUCED VOLTAGE (volt) :5A 00:5A 000:5A 9000:5A EXCITING CURRENT (amp) NUMBER * RATIO 60HZ ± % BURDEN (VA) NOMINAL WINDING RESISTANCE (ohm) J xxx J xxx J xxx J xxx J xxx J xxx J xxx J xxx 000:5A 7000:5A 9000:5A 00:5A * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

7 CURRENT TRANSFORMER MODEL J6 " x 8-/4" PAGE No 2-8 REV 8DEC BRASS SCREW TERMINAL (2 PLACES) H X NOTES:.) ALL DIMENSIONS IN INCHES 2.) ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Ø 4 (4 PLACES) Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available. A output at F.S. primary amperage. Other non-standard ratings also available Thermal ratings above. for selected ratios 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types

8 " x 8-/4" PAGE No 2-9 CURRENT TRANSFORMER MODEL J6 REV 8DEC00 0 TYPICAL EXCITATION CURVE FOR MODEL J6 at 60HZ INDUCED VOLTAGE (volt) :5A EXCITING CURRENT (amp) NUMBER * J xxx J xxx J xxx J xxx RATIO 8000:5A 60HZ ± % BURDEN (VA) NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

9 CURRENT TRANSFORMER MODEL J7/2 7" x 2" PAGE No 2-0 8DEC BRASS SCREW TERMINAL (2 PLACES) Ø 8 (4 PLACES) H X NOTES:.) ALL DIMENSIONS IN INCHES 2.) ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available. A output at F.S. primary amperage. Other non-standard ratings also available Thermal ratings above. for selected ratios 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types

10 7" x 2" PAGE No 2- CURRENT TRANSFORMER MODEL J7/2 REV 8DEC00 0 TYPICAL EXCITATION CURVE FOR MODEL J7/2 at 60HZ INDUCED VOLTAGE (volt) :5A 0:5A 000:5A EXCITING CURRENT (amp) NUMBER * J7/ xxx J7/ xxx J7/ xxx J7/ xxx J7/ xxx J7/ xxx J7/ xxx J7/ xxx RATIO 0:5A 000:5A 8000:5A 60HZ ± % BURDEN (VA) 6 40 NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

11 CURRENT TRANSFORMER MODEL J7/25 7" x 25" PAGE No 2-2 REV 8DEC BRASS SCREW TERMINAL (2 PLACES) Ø 8 (4 PLACES) H X NOTES:.) ALL DIMENSIONS IN INCHES 2.) ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available., 0.2, and 0. A output at F.S. primary amperage. Other nonstandard ratings also available 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types Thermal ratings above. for selected ratios.

12 7" x 25" PAGE No 2- CURRENT TRANSFORMER MODEL J7/25 REV 8DEC00 0 TYPICAL EXCITATION CURVE FOR MODEL J7/25 at 60HZ 0 2 INDUCED VOLTAGE (volt) :5A 600:5A 0:5A EXCITING CURRENT (amp) NUMBER * J7/ xxx J7/ xxx J7/ xxx J7/ xxx J7/ xxx RATIO 600:5A 2400:5A 60HZ ± % BURDEN (VA) NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

13 CURRENT TRANSFORMER MODEL J7/27 7" x 27" PAGE No 2-4 REV 8DEC BRASS SCREW TERMINAL (2 PLACES) Ø 8 (4 PLACES) H X NOTES:.) ALL DIMENSIONS IN INCHES 2.) ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available., 0.2, and 0. A output at F.S. primary amperage. Other nonstandard ratings also available 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types Thermal ratings above. for selected ratios.

14 7" x 27" PAGE No 2-5 CURRENT TRANSFORMER MODEL J7/27 REV 8DEC00 0 TYPICAL EXCITATION CURVE FOR MODEL J7/27 at 60HZ 0 2 INDUCED VOLTAGE (volt) :5A EXCITING CURRENT (amp) NUMBER * J7/ xxx J7/ xxx J7/ xxx RATIO 2500:5A 60HZ ± % BURDEN (VA) 0 55 NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)

15 CURRENT TRANSFORMER MODEL J0/24 0" x 24" PAGE No 2-6 REV 8DEC BRASS SCREW TERMINAL (2 PLACES) Ø 8 (4 PLACES) H X NOTES:.) ALL DIMENSIONS IN INCHES 2.) ALL DIMENSIONS REF ONLY OPTIONAL MOUNTING PLATE BONDED TO TRANSFORMER Specifications Secondary sources 5 amps AC at rated F.S. primary current Nominal operating frequency range is HZ Thermal rating factor 0C for all ratios Insulation voltage class is 0.6KV BIL 0KV For indoor applications only Reference documents IEEE C57., UL244, CSA CAN-C-M8, and IEC 44- Enclosure is multi-layer tape buildup with heavy vinyl finish, color is black Optional plate is XX phenolic Options, contact Factory for information 2.0, 5.0, and 0 VAC output at F.S. primary amperage. Other non - standard ratings also available., 0.2, and 0. A output at F.S. primary amperage. Other nonstandard ratings also available 8-2 Screw Terminals or #6 AWG UL 05 Lead Wires Custom lead wire lengths and types Thermal ratings above. for selected ratios.

16 0" x 24" PAGE No 2-7 CURRENT TRANSFORMER MODEL J0/24 REV 8DEC00 0 TYPICAL EXCITATION CURVE FOR MODEL J0/24 at 60HZ 0 2 INDUCED VOLTAGE (volt) :5A EXCITING CURRENT (amp) NUMBER * J0/ xxx J0/ xxx RATIO 000:5A 60HZ ± % BURDEN (VA) 0 85 NOMINAL WINDING RESISTANCE (ohm) * "xxx" describes termination: "T" FOR BRASS SCREW TERMINALS and "Lyyy" FOR LEAD WIRES (Where "yyy" is the lead length in inches. For example, "L24" represents 24 inch long lead wires.)