Standard cylinders DNG/DNGL/DNGZK/DNGZS, ISO 15552
|
|
|
- Camilla Peters
- 7 years ago
- Views:
Transcription
1 Standard cylinders DNG/DNGL/DNGZK/DNGZS, ISO 15552
2 Features DNG DNGL DNGZK DNGZS Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design DNGL/DNGLZ: secured against rotation by means of square piston rod Standards-based cylinders to ISO (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA , NF E and UNI 10290) DIN 2 Internet: Subject to change 2010/02
3 Features Variants DNG/DNGZK/DNGZS DNGL/DNGLZ with square piston rod (non-rotating) Contactless sensing with proximity sensors SMEO-1/SMTO-1/SMPO-1 Depending on the stroke, each cylinder can have one or more proximity sensors attached to the tie rods (piston mm). With piston mm, they are fixed to additional mounting rods that are included in the scope of delivery. The sensors are used for contactless sensing of end or intermediate positions of the cylinder. Mounting options Installation of basic version Mounting at front Mounting at rear Installation options using mounting attachments Foot mounting MS1 1) HNG Flange mounting MF1/MF2 1) FNG at front at rear Trunnion flange ZNG Swivel flange MP2 1) SNG/SNGB/SNGL Swivel flange with spherical bearing SSNG Trunnion mounting kit MT4 1) LNZG at front at rear 1) Standard designation to ISO (ISO 6431) 2010/02 Subject to change Internet: 3
4 Product range overview Function Design Type Piston Stroke Position sensing Cushioning Adjustable A PPV Double- Basic version acting DNG 32, 40, 50, 63, 25, 40, 50, 100, 125, 160, Single-ended 80, 100, , 250, 320, 400, 500 piston rod 160, , DNG- -S2 32, 40, 50, 63, Through piston 80, 100, 125, rod 160, , Non-rotating piston rod DNGL Single-ended piston rod 50, , DNGL- -S Through piston rod 50, , DNGLZ with central trunnion 50, mounting 80, With central trunnion mounting DNGZK adjustable DNGZS fixed 32, 40, 50, 63 40, 50, 100, 125, 160, 200, 250, 320, 400, , , 100, 125, 160, 200, 250, , 400, , 160, , Internet: Subject to change 2010/02
5 Product range overview Type Piston rod Heat-resistant seal High corrosion protection Page/Internet Male thread Stainless steel S3 S6 S8 Basic version DNG Single-ended piston rod 9 DNG- -S2 Through piston rod 9 Non-rotating piston rod DNGL 9 Single-ended piston rod DNGL- -S2 9 Through piston rod DNGLZ 9 with central trunnion mounting With central trunnion mounting DNGZK adjustable 9 DNGZS fixed /02 Subject to change Internet: 5
6 Peripherals overview aj 6 ab ad ae af 9 ac aa ab ag bi cj bc bd be ah ai aj bf bg bj ba 2 bb bh Mounting attachments and accessories 1 Adapter kit DPNG 2 Foot mounting HNG 3 Flange mounting FNG 4 Trunnion flange ZNG 5 Trunnion support LNZG 6 Swivel flange SNG Brief description Page/Internet For connecting two DNG cylinders with identical piston to form a multi-position cylinder 19 For bearing and end caps 20 corresponds to MS1 to ISO For bearing or end caps 21 corresponds to MF1/MF2 to ISO For bearing or end caps 21 Corresponds to MT4 to ISO For end caps 22 6 Internet: Subject to change 2010/02
7 Peripherals overview Mounting attachments and accessories 7 Clevis foot mounting LSNG 8 Clevis foot mounting LSNSG 9 Swivel flange SSNG aj Clevis foot mounting LBG aa Swivel flange SNGL ab Swivel flange SNGB ac Clevis foot mounting LNG ad Clevis foot mounting LSN ae One-way flow control valve GRLA af Push-in fitting QS ag Connecting cable, straight NEBU Connecting cable, angled NEBU ah Proximity sensors SMEO-1/SMTO-1/SMPO-1-H-B ai Sensor mounting kit SMB bj Sensor mounting kit SMBS Sensor mounting kit SMBR-8-8/100-S6 ba Proximity sensors SME/SMT-8 bb Sensor mounting kit SMBZ-8- bc Rod eye SGS bd Coupling piece KSG/KSZ be Rod clevis SG bf Self-aligning rod coupler FK bg Adapter AD bh Guided unit FENG bi Right-angle clevis foot LQG cj Rod clevis SGA Brief description Page/Internet With spherical bearing 25 Weld-on 25 with spherical bearing With spherical bearing for clevis foot mounting LBG 23 With non-rotating pivot pin 25 For end caps 24 corresponds to MP2 to ISO For end caps 23 corresponds to MP2 to ISO For swivel flange SNGB 25 With spherical bearing 25 For speed regulation 25 ForconnectingcompressedairtubingwithstandardO.D For proximity sensor SMEO-1/SMTO-1 29 For proximity sensor SMPO-1-H-B 29 Corrosion resistant, for proximity sensor SME/SMT For proximity sensor SME/SMT-8 28 With spherical bearing 26 For compensating radial deviations 26 Permits a swivelling movement of the cylinder in one plane 26 For compensating radial and angular deviations To protect against torsion at high torque loads 27 With non-rotating pivot pin 25 Suitable for spherical mounting of cylinders in conjunction with rod eye SGS 26 quick star 2010/02 Subject to change Internet: 7
8 Type codes DNG PPV A Type Double-acting DNG DNGL DNGLZ DNGZK DNGZS Standard cylinder Standard cylinder, non-rotating Standard cylinder, non-rotating with central trunnion mounting Standard cylinder with central trunnion mounting (adjustable) Standard cylinder with central trunnion mounting (fixed) Piston Stroke Cushioning PPV Adjustable at both ends Position sensing A For proximity sensing Trunnion flange axis distance XV Trunnion flange position Variants S2 S3 S6 S8 Through piston rod Stainless steel piston rod Heat resistant seal for temperatures up to 120 C High corrosion protection 8 Internet: Subject to change 2010/02
9 Technical data Function Variants S2 -N- Diameter mm -T- Stroke length mm S3 S6 -W- S8 DNG DNGL DNGL Standards-based cylinders to ISO (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA , NF E and UNI 10290) DIN DNGZK DNGZS General technical data Piston Pneumatic connection Gx G¼ G¼ Gy Gy G½ G½ G¾ G¾ G1 G1 Piston rod thread M10x1.25 M12x1.25 M16x1.5 M16x1.5 M20x1.5 M20x1.5 M27x2 M36x2 M36x2 M42x2 M48x2 Operating medium Filteredcompressedair, lubricatedor unlubricated Design Piston Piston rod Profile barrel Cushioning Adjustable at both ends Cushioning length Position sensing For proximitysensing Typeofmounting Via accessories Mounting position Any Operating and environmental conditions Piston Operating pressure [bar] Ambient temperature 1) [ C] ATEX Specified types 1) Note operating range of proximity sensors Forces [N] Piston Theoretical force at 6 bar, advancing ,178 1,870 3,015 4,712 7,360 12,064 18,850 29,450 48,250 Theoretical force at 6 bar, retracting ,682 2,720 4,418 6,880 11,310 18,096 28,270 46, /02 Subject to change Internet: 9
10 Technical data Lateral force F Q as a function of the stroke length l /63 80/ / FQ [N] l Weights [g] Piston DNG/DNGL Productweightat0mmstroke ,400 1,725 2,875 4,100 7,305 17,265 20,115 30,800 53,200 Additional weight per 10 mm stroke DNGZK/DNGLZ/DNGZS Productweightat0mmstroke 820 1,275 1,945 2,765 3,960 6,210 10,215 19,510 Additional weight per 10 mm stroke Internet: Subject to change 2010/02
11 Technical data Materials Sectional view DNG/DNGL Sectional view DNGZK/DNGLZ Standard cylinder DNG/DNGL DNGZK/DNGLZ 1 Bearing and end caps Aluminium Die-cast aluminium ( 160/200: die-cast aluminium) 2 Cylinder barrel Aluminium Aluminium ( 160/200: brass) 3 Piston rod, tie rod High-alloy steel Seals Polyurethane, nitrile rubber 2010/02 Subject to change Internet: 11
12 Technical data Dimensions DNG/DNGL Download CAD data DNG DNG DNGL/DNGLZ 1 Socket head screw with female thread for mounting attachments 2 Regulating screw for adjustable end-position cushioning 3 From 125 with additional rods for mounting proximity sensors + = plus stroke length Variant S2 Through piston rod + = plus stroke length ++ = plus 2x stroke length DNGZK/DNGLZ/DNGZS with central trunnion mounting adjustable, fixed + =plusstrokelength +½ =plushalfstrokelength 12 Internet: Subject to change 2010/02
13 Technical data AM B d11 B1 f9 BG C2 C3 D4 D5 E EE J2 J Gx G¼ G¼ Gy Gy G½ G½ G¾ G¾ G G KK L1 L2 L7 MM PL RT TD e9 TG TK TL 32 M10x ± M M12x ±0, M M16x ± M M16x ± M M20x ± M M20x ± M M27x ± M M36x ± M M36x ± M M42x ± M M48x ± M TM UW VA VD WH XG XJ XV ZJ ZM ß1 ß3 ß ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± H- Note DNGZS-250/ PPV-A: The central trunnion mounting is fittedasstandardtightlyscrewedwith the tie rods in the cylinder midsection. As a special design, mounting is possible between the dimensions XG and XJ. The required dimension XV must be entered in the order ( 18). 2010/02 Subject to change Internet: 13
14 Technical data Ordering data Design Stroke Piston 32 Piston 40 Piston 50 Part No. Type 1) Part No. Type 1) Part No. Type 1) Basic version DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A Variable stroke 10 2, DNG-32- -PPV-A DNG-40- -PPV-A DNG-50- -PPV-A Variant S2 10 2, DNG-32- -PPV-A-S DNG-40- -PPV-A-S DNG-50- -PPV-A-S2 Variant S3 10 2, DNG-32- -PPV-A-S DNG-40- -PPV-A-S DNG-50- -PPV-A-S3 Variant S6 10 2, DNG-32- -PPV-A-S DNG-40- -PPV-A-S DNG-50- -PPV-A-S6 Variant S8 10 2, DNG-32- -PPV-A-S DNG-40- -PPV-A-S DNG-50- -PPV-A-S8 with non-rotating piston rod Variable stroke DNGL-32- -PPV-A DNGL-40- -PPV-A DNGL-50- -PPV-A Variant S DNGL-32- -PPV-A-S DNGL-40- -PPV-A-S DNGL-50- -PPV-A-S Variant S DNGL-32- -PPV-A-S DNGL-40- -PPV-A-S DNGL-50- -PPV-A-S with adjustable central trunnion mounting DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A Variable stroke 10 2, DNGZK-32- -PPV-A DNGZK-40- -PPV-A DNGZK-50- -PPV-A Variant S3 10 2, DNGZK-32- -PPV-A-S DNGZK-40- -PPV-A-S DNGZK-50- -PPV-A-S3 Variant S6 10 2, DNGZK-32- -PPV-A-S DNGZK-40- -PPV-A-S DNGZK-50- -PPV-A-S6 Variant S8 10 2, DNGZK-32- -PPV-A-S DNGZK-40- -PPV-A-S DNGZK-50- -PPV-A-S8 1) The scope of delivery includes a hex nut for the piston rod thread. 14 Internet: Subject to change 2010/02
15 Technical data Ordering data Design Stroke Piston 63 Piston 80 Piston 100 Part No. Type 1) Part No. Type 1) Part No. Type 1) Basic version DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A Variable stroke 10 2, DNG-63- -PPV-A DNG-80- -PPV-A DNG PPV-A Variant S2 10 2, DNG-63- -PPV-A-S DNG-80- -PPV-A-S DNG PPV-A-S2 Variant S3 10 2, DNG-63- -PPV-A-S DNG-80- -PPV-A-S DNG PPV-A-S3 Variant S6 10 2, DNG-63- -PPV-A-S DNG-80- -PPV-A-S DNG PPV-A-S6 Variant S8 10 2, DNG-63- -PPV-A-S DNG-80- -PPV-A-S DNG PPV-A-S8 with non-rotating piston rod Variable stroke DNGL-63- -PPV-A DNGL-80- -PPV-A DNGL PPV-A Variant S DNGL-63- -PPV-A-S DNGL-80- -PPV-A-S DNGL PPV-A-S2 Variant S DNGL-63- -PPV-A-S DNGL-80- -PPV-A-S DNGL PPV-A-S6 with adjustable central trunnion mounting DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A Variable stroke 10 2, DNGZK-63- -PPV-A DNGZK-80- -PPV-A DNGZK PPV-A Variant S3 10 2, DNGZK-63- -PPV-A-S DNGZK-80- -PPV-A-S DNGZK PPV-A-S3 Variant S6 10 2, DNGZK-63- -PPV-A-S DNGZK-80- -PPV-A-S DNGZK PPV-A-S6 Variant S8 10 2, DNGZK-63- -PPV-A-S DNGZK-80- -PPV-A-S DNGZK PPV-A-S8 1) The scope of delivery includes a hex nut for the piston rod thread. 2010/02 Subject to change Internet: 15
16 Technical data Ordering data Design Stroke Piston 32 Piston 40 Piston 50 Part No. Type 1) Part No. Type 1) Part No. Type 1) with non-rotating piston rod and adjustable central trunnion mounting Variable stroke DNGLZ-32- -PPV-A DNGLZ-40- -PPV-A DNGLZ-50- -PPV-A Variant S DNGLZ-32- -PPV-A-S DNGLZ-40- -PPV-A-S DNGLZ-50- -PPV-A-S ) The scope of delivery includes a hex nut for the piston rod thread. Ordering data Design Stroke Piston 125 Piston 160 Piston 200 Part No. Type 1) Part No. Type 1) Part No. Type 1) Basic version DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A DNG PPV-A Variable stroke 10 2, DNG PPV-A DNG PPV-A DNG PPV-A 10 1,100 Variant S2 10 2, DNG PPV-A-S DNG PPV-A-S DNG PPV-A-S2 10 1,100 Variant S3 10 2, DNG PPV-A-S DNG PPV-A-S DNG PPV-A-S3 10 1,100 Variant S6 10 2, DNG PPV-A-S DNG PPV-A-S DNG PPV-A-S6 10 1,100 Variant S8 10 2, DNG PPV-A-S DNG PPV-A-S DNG PPV-A-S8 10 1,100 with adjustable central trunnion mounting Variable stroke 10 2, DNGZK PPV-A DNGZK PPV-A DNGZK PPV-A Variant S3 10 2, DNGZK PPV-A-S DNGZK PPV-A-S DNGZK PPV-A-S3 Variant S6 10 2, DNGZK PPV-A-S DNGZK PPV-A-S DNGZK PPV-A-S6 Variant S8 10 2, DNGZK PPV-A-S DNGZK PPV-A-S DNGZK PPV-A-S8 1) The scope of delivery includes a hex nut for the piston rod thread. 16 Internet: Subject to change 2010/02
17 Technical data Ordering data Design Stroke Piston 63 Piston 80 Piston 100 Part No. Type 1) Part No. Type 1) Part No. Type 1) with non-rotating piston rod and adjustable central trunnion mounting Variable stroke DNGLZ-63- -PPV-A DNGLZ-80- -PPV-A DNGLZ PPV-A Variant S DNGLZ-63- -PPV-A-S DNGLZ-80- -PPV-A-S DNGLZ PPV-A-S6 1) The scope of delivery includes a hex nut for the piston rod thread. Ordering data Design Stroke Piston 250 Piston 320 Part No. Type 1) Part No. Type 1) Basic version Variable stroke 10 2, , DNG PPV-A DNG PPV-A Variant S2 10 2, , DNG PPV-A-S DNG PPV-A-S2 Variant S3 10 2, , DNG PPV-A-S DNG PPV-A-S3 Variant S6 10 2, , DNG PPV-A-S DNG PPV-A-S6 Variant S8 10 2, , DNG PPV-A-S DNG PPV-A-S8 with fixed central trunnion mounting Variable stroke 10 1, ) The scope of delivery includes a hex nut for the piston rod thread. 2010/02 Subject to change Internet: 17
18 Standard cylinders DNG/DNGL/DNGZK/DNGZS, to ISO Ordering data Modular product DNGZS 0M Mandatory data 0O Options Module No. Function Piston Stroke Cushioning Position sensing Trunnion flange position Temperatureresistant Corrosion protection DNGZS PPV A XV S6 S3 S8 Ordering example DNGZS PPV A 215XV S6 S3 Ordering table Size Conditions 0M Module No Function Standard cylinder, double-acting, with central trunnion mounting to ISO DNGZS DNGZS Piston Stroke Cushioning Pneumatic cushioning adjustable at both ends -PPV -PPV Position sensing For proximitysensing -A -A 0O Trunnion flange position XV Temperature-resistant Heat-resistant seals up to max. 120 C -S6 Corrosion protection Stainless steel piston rod -S3 High corrosion protection including piston rod, stainless steel 2 -S8 Code Enter code 1 XV Trunnion flange at standard mid-position of cylinder: Piston 250 mm: 205 mm + Stroke 2 Piston 320 mm: 230 mm + Stroke 2 2 S8 Not with S6. Transfer order code DNGZS PPV A 18 Internet: Subject to change 2010/02
19 Accessories Adapter kit DPNG for piston mm Material: Flange: Wrought aluminium alloy; Threaded studs, hex nuts: Galvanised steel Free of copper, PTFE and silicone + = plus stroke length Dimensions and ordering data For F1 ZJ Max. overall CRC 1) Weight Part No. Type stroke length [g] , DPNG-32 -H- Note , DPNG-40 The maximum overall stroke length , DPNG-50 may not be exceeded when , DPNG-63 combining cylinders and the , DPNG-80 adapter kit , , DPNG-100 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents Connecting two cylinders with identical piston as a 3 or 4-position cylinder A 3 or 4-position cylinder consists of two separate cylinders whose piston rods advance in opposing directions. This means that depending upon actuation and stroke pattern, this type To achieve 3 positions Two cylinders with identical stroke length must be connected together. of cylinder can assume up to four positions. In each case the cylinder is driven precisely against a stop. Note that when one end of the piston rod is fixed, the cylinder barrel executes the movement. The cylinder must be connected with flexible line connections. To achieve 4 positions Two cylinders with different stroke lengths must be connected together. 2010/02 Subject to change Internet: 19
![Type stroke length [g] 32 27 120 1,000 2 85 159 485 DPNG-32 -H- Note 40 27 135 1,000 2 115 159 486 DPNG-40 The maximum overall stroke length 50 32 143 1,000 2 210 159 487 DPNG-50 may not be exceeded](/docs-images/46/21268703/images/page_19.jpg "when 63 28 158 1,000 2 360 159 488 DPNG-63 combining cylinders and the 80 38 174 1,000 2 620 159 489 DPNG-80 adapter kit.")
20 Accessories Foot mounting HNG For piston Material: Galvanised steel Free of copper, PTFE and silicone For piston = plus stroke length Dimensions and ordering data For AB AH AO AT AU D1 H1 SA TR US XA CRC 1) Weight Part No. Type H14 [g] HNG HNG HNG HNG , HNG , HNG , HNG , HNG , HNG , HNG , HNG-320 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 20 Internet: Subject to change 2010/02
21 Accessories Flange mounting FNG + = plus stroke length Material: FNG : Galvanised steel FNG : Painted nodular graphite cast iron Free of copper, PTFE and silicone Dimensions and ordering data For E FB MF R TF UF W ZF CRC 1) Weight Part No. Type [g] FNG FNG FNG FNG , FNG , FNG , FNG , FNG , FNG FNG FNG-320 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents Trunnion flange ZNG for trunnion mounting LNZG Material: Corrosion resistant cast steel Free of copper, PTFE and silicone + = plus stroke length Dimensions and ordering data For C2 C3 TD TK TL TM UW XH XL CRC 1) Weight Part No. Type e9 [g] ZNG ZNG ZNG ZNG , ZNG , ZNG , ZNG-125 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 2010/02 Subject to change Internet: 21
22 Accessories LNZG trunnion support Material: Trunnion support: : Anodised aluminium : Galvanised steel Plain bearing: : Plastic : Sintered bronze Free of copper, PTFE and silicone Dimensions and ordering data For CR DA FK FN FS H1 HB KE NH TH UL CRC 1) Weight Part No. Type H13 H13 [g] D ± ± LNZG-32 40/50 16 D ± ± LNZG-40/50 63/80 20 D ± ± LNZG-63/80 100/ D ± ± LNZG-100/ / D ± ± , LNZG-160/ G ± ± , LNZG G ± ± , LNZG-320 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents Swivel flange SNG for clevis foot LSNG/LSNSG Material: Die-cast aluminium 1 The pivot pin is secured against rotation with a dowel pin. + = plus stroke length Dimensions and ordering data For CG CP EK FL L SR XC CRC 1) Weight Part No. Type H14 d12 [g] SNG SNG SNG SNG , SNG , SNG , SNG , SNG , SNG-200 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 22 Internet: Subject to change 2010/02
23 Accessories Swivel flange SNGB for clevis foot LN/LSN Material: Die-cast aluminium 200: Steel + = plus stroke length Dimensions and ordering data For CB CD FL L ML MR UB XC CRC 1) Weight Part No. Type h14 [g] SNGB SNGB SNGB SNGB SNGB , SNGB , SNGB , SNGB SNGB-200-B SNGB SNGB-320 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents Swivel flange SSNG with spherical bearing for clevis foot LBG Material: Nodular graphite cast iron + = plus stroke length Dimensions and ordering data For CN EP EX FL LT MS XC CRC 1) Weight Part No. Type [g] SSNG SSNG SSNG SSNG SSNG , SSNG , SSNG-125 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 2010/02 Subject to change Internet: 23
24 Accessories Swivel flange SNGL Material: Die-cast aluminium Variant CT: Free of copper, PTFE and silicone + = plus stroke length Dimensions and ordering data For CD EW FL L MR XC CRC 1) Weight Part No. Type [g] SNGL SNGL SNGL SNGL SNGL SNGL , SNGL , SNGL , SNGL-200 1) Corrosion resistance class 2 according to Festo standard Components requiring moderate corrosion resistance. Externally visible parts with primarily decorative surface requirements which are in direct contact with a surrounding industrial atmosphere or media such as cooling or lubricating agents 24 Internet: Subject to change 2010/02
25 Accessories Ordering data Mounting attachments Technical data Internet: clevis foot Designation For Part No. Type Designation For Part No. Type Clevis foot LSNG Weld-on clevis foot LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNSG LSNG LSNG Clevis foot LBG Clevis foot LNG LBG LNG LBG LNG LBG LNG LBG LNG LBG LNG LBG LNG LBG LNG LNG-200 Clevis foot LSN Clevis foot, right-angled LQG LSN LQG LSN LQG LSN LQG LSN LQG LSN LQG LSN LQG LSN LQG LSN LSN LSN LSN Ordering data One-way flow control valves Technical data Internet: grla Connection Material Part No. Type Thread For tubing OD Gxx 3 Metal design GRLA-x-QS-3-D GRLA-x-QS-4-D GRLA-x-QS-6-D GRLA-x-QS-8-D G¼¼ GRLA-¼-QS-6-D GRLA-¼-QS-8-D GRLA-¼-QS-10-D Gyy GRLA-y-QS-6-D GRLA-y-QS-8-D GRLA-y-QS-10-D G½ GRLA-½-QS-12-D 2010/02 Subject to change Internet: 25
26 Accessories Ordering data Piston rod attachments Technical data Internet: piston-rod attachment Designation For Part No. Type Designation For Part No. Type Rod eye SGS Rod clevis SGA SGS-M10x1, SGA-M10x1, SGS-M12x1, SGA-M12x1, SGS-M16x1, SGA-M16x1, SGS-M20x1, SGA-M20x1, SGS-M27x SGA-M27x SGS-M36x SGA-M36x SGS-M42x SGS-M48x2 Rod clevis SG Self-aligning rod coupler FK SG-M10x1, FK-M10x1, SG-M12x1, FK-M12x1, SG-M16x1, FK-M16x1, SG-M20x1, FK-M20x1, SG-M27x2-B FK-M27x SG-M36x FK-M36x SG-M42x SG-M48x2 320 Coupling piece KSG Coupling piece KSZ KSG-M10x1, KSZ-M10x1, KSG-M12x1, KSZ-M12x1, KSG-M16x1, KSZ-M16x1, KSG-M20x1, KSZ-M20x1, KSG-M27x2 125 Adapter AD AD-M10x1,25-x AD-M10x1,25-¼ AD-M12x1,25-¼ AD-M12x1,25-y 26 Internet: Subject to change 2010/02
27 Accessories Ordering data Guide units for fixed strokes (recirculating ball bearing guide only) Technical data Internet: feng Stroke Part No. Type Stroke Part No. Type For 32 mm For 40 mm FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF For 50 mm For 63 mm FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF For 80 mm For 100 mm FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF FENG KF Ordering data Guide units for variable strokes Technical data Internet: feng For Stroke With recirculating ball bearing guide With sliding bearing guide Part No. Type Part No. Type FENG-32- -KF FENG FENG-40- -KF FENG FENG-50- -KF FENG FENG-63- -KF FENG FENG-80- -KF FENG FENG KF FENG /02 Subject to change Internet: 27
28 Accessories Ordering data Connecting cables Technical data Internet: nebu Electrical connection, left Electrical connection, right Cable length Part No. Type [m] Straightsocket, M8x1, 3-pin Cable, open end, 3-wire NEBU-M8G3-K-2.5-LE NEBU-M8G3-K-5-LE3 Angled socket, M8x1, 3-pin Cable, open end, 3-wire NEBU-M8W3-K-2.5-LE NEBU-M8W3-K-5-LE3 Ordering data Proximity sensors for T-slot, magneto-resistive Technical data Internet: smt Type of mounting Switch Electrical connection Cable length Part No. Type output [m] N/O contact Insertable in the slot from above, flush PNP Cable, 3-wire SMT-8M-PS-24V-K-2,5-OE with cylinder profile Plug M8x1, 3-pin SMT-8M-PS-24V-K-0,3-M8D Plug M12x1, 3-pin SMT-8M-PS-24V-K-0,3-M12 NPN Cable, 3-wire SMT-8M-NS-24V-K-2,5-OE Plug M8x1, 3-pin SMT-8M-NS-24V-K-0,3-M8D Insertable in the slot lengthwise, flush PNP Cable, 3-wire SMT-8-PS-K-LED-24-B with the cylinder profile Plug M8x1, 3-pin SMT-8-PS-S-LED-24-B N/C contact Insertable in the slot from above, flush with cylinder profile PNP Cable, 3-wire SMT-8M-PO-24V-K7,5-OE Ordering data Proximity sensors for T-slot, magnetic reed Technical data Internet: sme Type of mounting Switch Electrical connection Cable length Part No. Type output [m] N/O contact Insertable in the slot from above, flush Contacting Cable, 3-wire SME-8M-DS-24V-K-2,5-OE with cylinder profile SME-8M-DS-24V-K-5,0-OE Cable, 3-wire SME-8M-ZS-24V-K-2,5-OE Plug M8x1, 3-pin SME-8M-DS-24V-K-0,3-M8D Insertable in the slot lengthwise, flush Contacting Cable, 3-wire SME-8-K-LED-24 with the cylinder profile Plug M8x1, 3-pin SME-8-S-LED-24 N/C contact Insertable in the slot lengthwise, flush with the cylinder profile Contacting Cable, 3-wire SME-8-O-K-LED-24 Ordering data Mounting kits for proximity sensors SME/SMT-8 Technical data Internet: smbz For Materials Part No. Type mm Rail: Wrought aluminium alloy, anodised SMBZ-8-32/ mm Screws: High-alloy steel SMBZ-8-125/320 Free of copper and PTFE 28 Internet: Subject to change 2010/02
29 Accessories Ordering data Rectangular proximity sensors, magneto-resistive Technical data Internet: smto Mounting Switch Electrical connection Cable length Part No. Type output Cables M8 plug [m] NO contact Via accessories PNP 3-wire SMTO-1-PS-K-LED-24-C 3-pin SMTO-1-PS-S-LED-24-C NPN 3-wire SMTO-1-NS-K-LED-24-C 3-pin SMTO-1-NS-S-LED-24-C Ordering data Rectangular proximity sensors, magnetic reed Technical data Internet: smeo Mounting Electrical connection Cable length Part No. Type Cables M8 plug [m] NO contact Via accessories 3-wire SMEO-1-LED-24-B 3-wire SMEO-1-LED-24-K5-B 3-pin SMEO-1-S-LED-24-B Ordering data Mounting kits for proximity sensors SMEO/SMTO-1 Technical data Internet: smb For Mounting Part No. Type SMB-3B FESTO mm Directly on the mounting or tie rod SMB-2-B mm SMB mm SMB-3-B Ordering data Rectangular proximity sensors, pneumatic Technical data Internet: smpo Mounting Pneumatic connection Part No. Type 3/2-way valve, normally closed Via accessories Barbed fitting for tubing ID of 3 mm SMPO-1-H-B Ordering data Mounting kits for proximity sensors SMPO-1 Technical data Internet: smbs For Mounting Part No. Type mm On the cylinder barrel via clamping strap SMBS-2 Ordering data Mounting kits for proximity sensors SME/SMT-8 Technical data Internet: smbr For Mounting CRC 1) Part No. Type mm On the cylinder barrel via clamping strap SMBR-8-8/100-S6 1) Corrosion resistance class 4 according to Festo standard Components requiring higher corrosion resistance. Parts used with aggressive media, e.g. food or chemical industry. These applications should be supported with special tests with the media if required 2010/02 Subject to change Internet: 29
Standard cylinders DNG/DNGZK/DNGZS, ISO 15552
Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO 15552 (corresponds
-U- Type to be discontinued
Standard cylinders DNU/DNUL, For new designs use standard cylinders DNC 1 / 1.2-24 Double-acting For contactless position sensing Comprehensive range of accessories 2003/10 Subject to change Products 2004/2005
Tie rod cylinders DNG/DNGL/DNGZK Inch Series
Tie rod cylinders DNG/DNGL/DNGZK Inch Series Piston 1-1/4 to 6 Strokes up to 78.7 Double-acting Robust tie rod design Comprehensive range of accessories Repairable Non-rotating piston rod version available
Standard cylinders DSBG, to ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA24 562, NF E 49003.1 and UNI 10290) Sturdy tie rod design Double-acting
Swivel/linear drive units DSL-B
Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel
Standard cylinders DNC, ISO 15552
Standard cylinders DNC, ISO 15552 -V- New Bellows DADB Standard cylinders DNC, ISO 15552 Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO
Cylinders Series 40. Double acting, cushioned, magnetic ø160-200 - 250 (DIN/ISO 6431)
Cylinders Series 40 Double acting, cushioned, magnetic ø60-200 - 250 (DIN/ISO 643)»»» DIN/ISO 643 VDMA 24562 Rolled stainless steel rod Adjustable cushioning The cylinders Series 40 with diameters 60,
Standard cylinders DSBC, to ISO 15552
Key features At a glance DIN Standards-based cylinders to ISO 15552 (corresponds to the withdrawn standards ISO 6431, DIN ISO 6431, VDMA 24 562, NF E49003.1 and UNI 10290) Double-acting For contactless
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Compact cylinders ADN/AEN, to ISO 21287
Compact cylinders ADN/AEN, to ISO 21287 Compact cylinders ADN/AEN, to ISO 21287 Key features At a glance Sensor slots on three sides for flush mounting of proximity sensors Centring hole in the end cap
Piston rod cylinder Standard cylinders ISO 15552, series TRB. Brochure
ISO 15552, series TRB Brochure 2 ISO 15552, series TRB Tie rod cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
Linear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
Piston rod cylinders Standard cylinders ISO 15552, series PRA. Brochure
ISO 15552, series PRA Brochure 2 ISO 15552, series PRA Profile cylinder Ports: G 1/8 - G 1/2 double-acting with magnetic piston Cushioning: pneumatically, adjustable Piston rod: external thread ATEX optional
Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62
1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 62 Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80,
Normcylinder 1.5002. Technical data. tension-rod cylinder. according DIN ISO 6431 VDMA 24562 DI/DIM DIM DIMB
Normcylinder Universal application through accomodating on DIN ISO 6431 and VDMA 24562 Part 1. Fastening elements according DIN ISO 6431, VDMA 24562 Part 2. Technical data Tension-rod-cylinder according
Cylinders DIN ISO 6431 and VDMA 24 562
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
Piston rod attachments
Piston rod attachments Co-ordinated with Festo s cylinder range Versatile combinations Sturdy and functional Stainless steel variants 2015/11 Subject to change Internet: www.festo.com/catalog/... 1 Piston
How To Make A Piston Engine
Key features At a glance High repetition accuracy thanks to cushioning components with fixed stop Swivel angle can be infinitely and accurately set The mechanical gearing between the stop element and swivel
Piston rod cylinder Tie rod cylinder Series 167. Brochure
Brochure 2 Tie rod cylinder ISO 6431, Ports: G 1/8 - G 1/2 double-acting with magnetic piston cushioning: pneumatically, adjustable Piston rod: external thread 5 Tie rod cylinder ISO 6431, -53 double-acting
Stainless Steel Cylinders DIN ISO 6431 and VDMA 24 562
Bores from 32 to 200 mm Double acting Standard executions Version Symbol TYPE MAGNETIC STANDARD AMX STAINLESS STEEL For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed
On-off valves MS-EM/EE, MS series, NPT
On-off valves MS-EM/EE, MS series, NPT On-off valves MS9-EM, MS series, NPT Peripherals overview 5 3 4 aa -H- Note Additional accessories: Module connector for combinations with size MS6, MS9 or size MS12
DOUBLE ACTING CYLINDERS, Ø 32 to 125 mm
DOUBLE ACTING CYLINDERS, 3 to 15 mm conforming to ISO 6431 - VDMA 456 STANDARDS SERIES 450 - TYPE : PES (with profiled barrel) P30-GB.R8 DOUBLE ACTING PNEUMATIC CYLINDERS - TYPE PES WITH PROFILED BARREL
KA/8000/M, KA/8000, ISO cylinder (Stainless steel) Magnetic & Non-magnetic piston, double acting
K/8000/M, K/8000, ISO cylinder (Stainless steel) > > Ø 3... 00 mm > > High corrosion and acid resistance > > Ideal for applications in the food industry > > Conforms to DIN ISO 555, DIN ISO 63, VDM 56
TECHNICAL CHARACTERISTICS. Series K---- Codification key SERIES
Pneumatic cylinders mm according to ISO 643 and VDMA 56 with adjustable cushioning UNIVER pneumatic cylinders which comply with ISO 643 and VDMA 56 standards, take advantage of the improvements arising
CARTON CLOSING CASE CLOSED. tradition. quality. vision.
tradition. quality. vision. CASE CLOSED CARTON CLOSING SPEED - Staples fasten instantly saving time over other methods of case closing. SECURITY - Stapled cases show evidence of tampering which discourages
Control block VOFA with safety function
Key features Innovative Versatile Reliable Easy to assemble Can be used for safe reversing of a hazardous movement (5/2-way solenoid valve) Can be used for safe venting (3/2-way solenoid valve function,
Proximity sensors SMT/SME-8, for T-slot
Proximity sensors SMT/SME-8, for T-slot -V- New SMT-8M-A Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For T-slot Standard Insertable
Control blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
RM/55401/M, Roundline cylinder Magnetic piston, double acting
RM/550/M, Roundline cylinder > > Ø... 00 mm > > Clean line design > > ow friction, long life seals > > Standard magnetic piston for full control system versatility Technical features Medium: Compressed
Hydraulic cylinders Tie rod design. Type CD70 / CG70. Contents. Features. RE 17016 Edition: 2014-03 Replaces: 08.08
Hydraulic cylinders Tie rod design Type CD / CG RE 1 Edition: 2014-03 Replaces: 08.08 Series Component series 1X Nominal pressure bar [7 MPa] Features Contents types of mounting Piston Ø (ØAL)... mm Piston
RM/8000/M, ISO cylinder Magnetic piston, double acting
> > Ø 0... 5 mm > > Magnetic piston as standard > > Conforming to ISO 6 > > Corrosion resistant- With buffer or adjustable cushioning > > Nose mounting nut and piston rod supplied locknut as standard Technical
Displacement encoders
Displacement encoders Analogue and digital For measuring and positioning For use with pneumatic components 1 Displacement encoders Key features Analogue displacement encoders MLO-POT- -TLF Conductive plastic
Rotary actuators Rotary wing drives Series RAK. Brochure
Brochure 2 Rotary wing drives, angle of rotation: 30-270 Rotary wing drive, double-acting axis geometry: single 4 Rotary wing drives, angle of rotation: 90-270 Rotary wing drive, double-acting axis geometry:
ISO/VDMA Actuators. Engineering GREAT Solutions
ISO/VDMA Actuators Engineering GREAT Solutions 02 ISO/VDMA Actuators Contents 03 Introduction 04 ISO/VDMA Actuators 06 The ISO/VDMA Range 08 Industrial Options 10 Cleanline Options 12 IVAC innovation to
Proximity sensors SMT/SME-8, for T-slot
Proximity sensors SMT/SME-8, for T-slot Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For T-slot Standard Insertable in the slot
Membrane air dryers MS-LDM1, MS series
Membrane air dryers MS-LDM1, MS series Membrane air dryers MS-LDM1, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [μm] Pneumatic
Proximity sensors SMT/SME-8, for T-slot
Proximity sensors SMT/SME-8, for T-slot Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range Switching output Switching element function
Solenoid/pneumatic valves, Tiger Classic
Solenoid/pneumatic valves, Tiger Classic Electrically or pneumatically actuated valves With internal or external pilot air Sturdy and reliable Specified types in accordance with ATEX directive for potentially
Proximity sensors SIES-8M, inductive for T-slot
Peripherals overview and type codes Peripherals overview Mounting attachments and accessories 1 Connecting cable NEBU-M8 3 2 Gripper with T-slot e.g. parallel gripper DHPS 3 Electric axis EGC Page/Internet
Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
Hydraulic cylinder Mill type. CDL2 type. Contents. Features. RE 17326 Version: 2013-06 Replaces: 12.12. Series L2 Component series 1X
Hydraulic cylinder Mill type CDL2 type RE 17326 Version: 2013-06 Replaces: 12.12 Series L2 Component series 1X 2 pressure ranges: Nominal pressure 160 bar [16 MPa] Nominal pressure 250 bar [25 MPa] Features
Proximity sensors SMT/SME-8, for T-slot
Proximity sensors SMT/SME-8, for T-slot -V- New SMT-8M-ZS- -EX2 Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For T-slot Standard
Handling modules HSP
Handling modules HSP Handling modules HSP Key features at a glance Field of application Special features The handling module is a new generation of function modules for the automatic transfer, feed and
Magnetic proximity switches
Magnetic proximity switches Magnetic proximity switches Overview Page 38 Functional principle and installation Page 39 Cylindrical designs Page 41 Rectangular designs Page 42 37 Kurzübersicht Magnetoresistive
Port size 32 12 G1/8 RA/8032/* RA/8032/M/* QA/8032/00 100 25 G1/2 RA/8100/* RA/8100/M/* QA/8100/00
Actuators ISO/VDMA Cylinders RA/8000/M Ø 32 to 320 mm Conforms to ISO 6431, VDMA 24562 and NFE 49-003-1 High performance, ruggedness and reliability Extensive range of mountings Technical data Medium:
FDH Series Compact Finger Slides
FDH Series Compact Finger Slides Catalog #FDH- Prices effective September 1, 11 Cylinder block- Clear anodized aluminum Top Toolplate and Front Toolbar Clear anodized aluminum Tapped mounting holes ( for
PRA/182000/M; PRA/182000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 125 mm
P/8000/M; P/8000 Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 5 mm High performance, stability and reliability M/50 switches can be mounted flush with the profile Cylinders
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD BIMBA. company
HH SERIES: HEAVY DUTY INDUSTRIAL HYDRAULIC TRD a BIMBA company The TRD difference... Precision machined throughout. We started in business as precision machinists. Every component is machined in a manner
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
Turbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
MP/MR Series VDMA 24562 ISO 6431
MP/MR Series VDMA 24562 6431 PNEUMATIC PNEUMATIC MP/MR SERIES VDMA/ POWER General Page numbers General description and application benefits 3 Functional symbols 3 Model code 4 Preferred models - Basic
Universal plug connectors, for self-assembly
Universal plug connectors, for self-assembly Universal plug connectors, for self-assembly Product range overview Function Design Type Connection technology Connection cross section Protection [mm 2 ] class
kymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
Tyco PremiAir Pneumatic Actuators
A comprehensive range of pneumatic actuators, conforming to EN ISO 5211, providing compact, reliable and economical powered operation for all types of quarter turn valves. Features Mounting to valve either
RA/8000/M, RA/8000 Pneumatic cylinder, ISO 15552 Non-magnetic & magnetic piston, double acting Ø 32... 320 mm
Pneumatic cylinder, ISO 555 Non-magnetic & magnetic piston, double acting 3... 30 mm Comprehensive range for the utmost versatility Conforms to ISO 555 (ISO 643, VDM 456 and NFE 49-003-) High performance,
Solenoid valves VOFC Key features
Valve series VOFC Solenoid valves VOFC Key features General information The valves in the VOFC series are special 3/2-way and 5/2-way valves for process automation, for use within chemical and petrochemical
Service units MSB-FRC, MS series
Service units MSB-FRC, MS series Service units MSB-FRC, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade of filtration [µm] Pneumatic connection
Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series
Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series Pressure regulators MS-LR/LRB/LRP/LRPB/LRE, MS series Product range overview MS series service units Type Size Pressure regulation range [bar] Grade
Norbro Series 40R Pneumatic Actuator Double Acting or Spring Return
Pneumatic Actuator Double Acting or Spring Return Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators
DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered
Electrical Temperature Measurement DiwiTherm, Resistance Thermometers Model TR75, with digital Display Battery or Solar Powered WIKA Data Sheet TE 60.75 Applications Machinery, plant and tank construction
Inductive sensor NI10-M18-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Threaded barrel, M18 x 1 Chrome-plated brass DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6 (NA- MUR) M12
CYLINDER SERIES ISO 15552 (EX ISO 6431), Ø 32-63 mm TWO-FLAT
YIR SRIS ISO 2 (X ISO 3), - mm TWO-T This version of cylinder is used to keep the parts fixed to the piston rod at an angle and to apply torques within the specified limits. The piston rod of the Two lat
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
Proximity sensors SMT/SME-10, for C-slot
Proximity sensors SMT/SME-10, for C-slot Proximity sensors SMT/SME Product range overview Design Type of mounting Measuring principle Type Operating voltage range For C-slot Standard Insertable in slot
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
Electric Rotary Actuator - On/Off or programmable control actuator
Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type
Electro-Pneumatic Bus Door Control Mechanism
Electro-Pneumatic Bus Door Control Mechanism Application and Feature 1. Pneumatic Door Mechanism actuates the open/close movements of bus door through two double acting cylinders and two linkages with
3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
Compact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
PVM Piston Pumps Service Manual
PVM Piston Pumps Service Manual PVM018/020 PVM045/050 PVM057/063 PVM074/081 PVM098/106 PVM131/141 Table of Contents Service Parts Pump Description... 3 Basic pump Pump Operation Controls Types Part Identification...
Rotary Actuators, NAMUR interface VDI/VDE 3845 & ISO 5211 (ATEX certified) Series ARP
NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8. Rotary Actuators and Grippers Rotary Actuators, NAMUR interface VDI/VDE 384 & ISO 211 (ATEX certified) Series ARP Model: Rack & Pinion - Rotational
How To Drive A Compact Serie 1
Electric lifting cylinder Compact Series Table of Contents Glossary... 2 Compact serie SR 1... 4 Dimension SR 1... 5 Compact Serie SR 1SP... 6 Dimension SR 1SP... 7 Compact Serie SR 5... 8 Dimension SR
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Laserlyte-Flex Alignment System
Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning
DryLin ZLW Belt Drive
Belt Drive +50º 0º DryLin toothed belt drives have been developed for the fast positioning of small loads. The linear units with toothed belt drive are corrosion resistant, light and compact, besides having
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)
Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv) Order code Series and function 1) Plug socket see page 5.042. MN-06-310-HN-442 Standard coil 1) 441 = 12 V DC, 4.2 W 442 = 24 V DC,
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
POWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
Ball valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141
ATEX category II 1 G, Ex zone 0 ATEX category II 1 D, Ex zone 20 SIL2 as per IEC 61508 Rectangular, height 6mm Plastic, PA12 Magnetic-inductive sensor DC 2-wire, nom. 8.2 VDC Output acc. to DIN EN 60947-5-6
FILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
FULL COLOR TAB #3 FM 25
FULL COLOR TAB #3 FM 25 FM - How to Order SERIES FM : Benefits Same construction as TA series with the added benefit of sleeve nut construction. Four tapped holes in Head and Cap-Standard. Optional four
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Richter Twin Piston Quarter-turn Actuators
Richter Twin Piston Quarter-turn ctuators R ompact Powerful Maintenance-free R ouble-acting quarter-turn actuators The actuators are the optimum automation units in technical and commercial terms for Richter
Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm
Electronic pressure measurement Electronic pressure switch with display Model PSD-30, standard version Model PSD-31, with flush diaphragm WIKA data sheet PE 81.67 Applications Machine tools Hydraulics
3/2-, 5/2- and 5/3-way Solenoid Valves for process pneumatics
3/2-, 5/2-5/3-way Solenoid Valves for process pneumatics Type 6518 stard High flow-rate capacity Reduced power consumption Single or manifold mounting stard Type 6518/6519 can be combined with... Stard-,
Machine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
Connecting Cables NEBU, Plug Sockets with Cable SIM
Connecting Cables NEBU, Plug Sockets with Cable SIM Connecting cables NEBU, plug sockets with cable SIM Product overview Connecting cables for standard, drag chain and robot applications Versions with
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
Plastic tubing, standard O.D.
Plastic tubing, standard O.D. Plastic tubing, standard O.D. Features Application The requirements with respect to pressure, temperature, flexibility and environmental influences differ from industry to
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
Electro-pneumatic control valves
Electropneumatic control valves 7 Miniature solenoid valves for alternating current Conform to the Low Voltage Directive or mounting on subbase or footprint in accordance with CNOMO recoendation E 066120N
United Kingdom Sweden Germany Switzerland USA, Canada and Mexico China Japan France Linear Units Y07 GB Asia Pacific Italy EU-200502-03 03JUL
Linear Units Linear Units Table of Contents Introduction... 5 Introduction... 5 How to Choose a Unit...6-7 Technical Introduction...8 - Linear Units with Ball Screw Drive and Ball Guide... 3 Introduction...
RoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.