8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P B E B B B-24267

Transcription

1 BALL ANGLE METER VALVES - 3/4" & " 8D. B MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number. Example: B Catalog size 5/8x3/4R 5/8x3/4 5/8x3/4x3/4R Meter size 5/8 5/8 5/8x3/4, 3/4 Tubing size 3/4 3/4 3/4 Catalog size 5/8x3/4x3/4 5/8x3/4x R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 P Ball Angle Meter Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x meter swivel nut** Quarter turn check - lock wing. 360 turn option available by Example: P Catalog size 5/8x3/4R 5/8x3/4 5/8x3/4x3/4R Meter size 5/8 5/8 5/8x3/4, 3/4 Tubing size 3/4 3/4 3/4 Catalog size 5/8x3/4x3/4 5/8x3/4x R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 B Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for IPS PE* pipe x meter swivel nut** adding -3 suffix to catalog number. Example: B Catalog size 5/8x3/4x3/4 5/8x3/4x Meter size 5/8x3/4, 3/4 5/8x3/4, Tubing size 3/4 E Ball Angle Meter Valve MUELLER Pack Joint Connection for IPS PE* pipe x meter swivel nut** adding -3 suffix to catalog number. Example: B Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 B Ball Angle Meter Valve MUELLER INSTA-TITE Connection for IPS PE* pipe x meter swivel nut** Example: B Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 Note: Two-piece factory assembly B Ball Angle Meter Valve MUELLER INSTA-TITE Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number. Example: B Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 Note: Two-piece factory assembly * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. ** Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number. The "R" indicates this valve has a reduced port. Port size is one nominal size smaller than the valve inlet/outlet

2 8D.2 B MUELLER 300 Ball Angle Meter Valve. Copper flare nut x meter swivel nut**. adding -3 suffix to catalog number. Example: B Catalog size 5/8x3/4R 5/8x3/4 5/8x3/4x3/4 Meter size 5/8 5/8 5/8x3/4, 3/4 Tubing size 3/4 3/4 3/4 Catalog size 5/8x3/4x3/4R 5/8x3/4x R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 BALL ANGLE METER VALVES 3/4", ", -/2" & 2" B Ball Angle Meter Valve F.I.P. x meter swivel nut** adding -3 suffix to catalog number. Example: B Catalog size 5/8x3/4R 5/8x3/4 5/8X3/4X3/4R Meter size 5/8 5/8 5/8x3/4,3/4 Pipe size 3/4 3/4 3/4 Catalog size 5/8x3/4x3/4 5/8x3/4x R Meter size 5/8x3/4,3/4 5/8x3/4,3/4 Pipe size 3/4 B Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter flange Example: B Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 Ball Angle Meter Valve - Two piece factory assembled Copper flare nut x meter flange suffix to catalog number. Example: B B Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 P Ball Angle Meter Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x meter flange Example: P Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 B Ball Angle Meter Valve F.I.P. x meter flange Example: B Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 B-2437 Ball Angle Meter Valve F.I.P. x meter swivel nut** Extended length. suffix to catalog number. Example: B Catalog size 3/4R Meter size 3/4 Pipe size 3/4 * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. The "R" indicates this valve has a reduced port. Port size is one nominal size smaller than the valve inlet/outlet These valves have meter flanges double drilled to fit either -/2" or 2" meters.

3 BALL ANGLE SERVICE VALVES 3/4" & " 8D.3 B MUELLER 300 Ball Angle Service Valve MUELLER 0 Compression Connection for CTS O.D.* tubing x F.I.P. Example: B B Ball Angle Service Valve Copper flare nut x F.I.P. adding -3 suffix to catalog number. Example: B Catalog size 3/4 Tubing size 3/4 Catalog size 3/4 Tubing size 3/4 B Ball Angle Service Valve F.I.P x F.I.P. adding -3 suffix to catalog number. Example: B B Ball Angle Service Valve F.I.P x M.I.P. adding -3 suffix to catalog number. Example: B Catalog size 3/4 3/4R R Tubing size 3/4 3/4 Catalog size 3/4 Tubing size 3/4 * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. The "R" indicates this valve has a reduced port. Port size is one nominal size smaller than the valve inlet/outlet.

4 8D.4 Shaded area indicates change BALL STRAIGHT METER VALVES 3/4" - " MUELLER 300 Ball Straight Meter Valve. MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut**. adding -3 suffix to catalog number. Example: B B P Ball Straight Meter Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x meter swivel nut**. Quarter turn check - lock wing. Example: P Catalog 3/4x5/8R 3/4R 3/4 5/8x3/4x R size Meter size 5/8 5/8x3/4,3/4 5/8x3/4,3/4 5/8x3/4,3/4 Tubing size 3/4 3/4 3/4 Catalog 3/4x5/8R 3/4R 3/4 5/8x3/4x R size Meter size 5/8 5/8x3/4,3/4 5/8x3/4,3/4 5/8x3/4,3/4 Tubing size 3/4 3/4 3/4 Ball Straight Meter Valve. MUELLER 0 Conductive Compression Connection for PE plastic pipe (IPS) * tubing x meter swivel nut**. Quarter turn check - lock wing. Example: B B B-2433 Ball Straight Meter Valve. MUELLER 0 Conductive Compression Connection for PE plastic pipe (IPS) * tubing x meter swivel nut**. Quarter turn check. 360 turn option available by Example: B Catalog size 3/4 5/8x3/4xR 5/8x3/4x R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 3/4 Catalog size 5/8x3/4xR 5/8x3/4x Meter size 5/8 5/8x3/4, 3/4 Tubing size Ball Straight Meter Valve. Copper flare nut x meter swivel nut**. Quarter turn check - lockwing. adding -3 suffix to catalog number. Example: B B B-2435 Catalog size 3/4R 3/4 5/8x3/4x R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 3/4 Ball Straight Meter Valve. F.I.P. x meter swivel nut**. Quarter turn check - lock wing. Example: B Catalog size 3/4R 3/4 3/4x5/8R 5/8x3/4x R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 3/4x5/8 5/8x3/4, 3/4 Tubing size 3/4 3/4 3/4 B Ball Straight Meter Valve. M.I.P. x meter swivel nut**. 360 turn option available by Example: B Catalog size 3/4R 3/4 R Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 3/4 B Ball Straight Meter Valve. MUELLER INSTA-TITE Connection for CTS O.D.* tubing x meter swivel nut**. Quarter turn check - lock wing. 360 turn option available by Example: B Catalog size 3/4R 3/4 5/8x3/4x Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 3/4 * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. **Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number. The "R" indicates this valve has a reduced port. The port size is one nominal size smaller than the valve inlet/outlet.

5 BALL STRAIGHT METER VALVES 3/4" - 2" 8D.5 Shaded area indicates change B-202 Ball Straight Meter Valve MUELLER INSTA-TITE Connection for CTS O.D.* tubing x F.I.P. Quarter turn check - lock wing. 360 turn option available by Example: B P Ball Straight Meter Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x meter flange Example: P Catalog size 3/4 Meter size 3/4 Pipe size 3/4 Catalog size -/2 2 Meter size -/2 2 Tubing size -/2 2 B MUELLER 300 Ball Straight Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter flange. Quarter turn check - lock wing. Example: B B Ball Straight Meter Valve F.I.P. x meter flange. Quarter turn check - lock wing. 360 turn option available by adding -3 suffix to catalog number. Example: B Catalog size -/2 2 Meter size -/2 2 Tubing size -/2 2 Catalog size -/2 2 Meter size -/2 2 Pipe size -/2 2 B Ball Straight Meter Valve Copper flare nut x meter flange 360 turn option by adding -3 suffix to catalog number. Example: B Catalog size -/2 2 Meter size -/2 2 Pipe size -/2 2 V Catalog size -/2 2 Meter size -/2 2 Pipe size -/2 2 Ball Straight Meter Valve MUELLER Pack Joint Connection for IPS* PVC pipe - both ends. Example: V * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. These valves have meter flanges double drilled to fit either -/2" or 2" meters. MUELLER Valves and Couplings are manufactured and tested in accordance with ANSI/AWWA C800

6 8D.6 B-2546 MUELLER 300 Ball Straight Service Valve - MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing - both ends suffix to catalog number (B ) Catalogsize 3/4R 3/4 R -/2 2 Valve size 5/8 3/4 3/4 -/2 2 Pipe size 3/4 3/4 -/2 2 B-2570 Ball Straight Service Valve - MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x F.I.P. suffix to catalog number (B ) Catalogsize 3/4R 3/4 3/4x R x3/4r -/2 2 Valve size 5/8 3/4 MUELLER 3/4 3/4300 Ball 3/4 Straight -/2Service 2 Pipe size 3/4 3/4 3/4 -/2 2 B-2596 MUELLER 0 Compression Connection for IPS* PE pipe x F.I.P. suffix to catalog number (B ) Catalog size 3/4 Valve size 3/4 Pipe size 3/4 B-2566 Ball Straight Service Valve Copper flare nut x F.I.P. suffix to catalog number (B ) Catalog size 3/4R 3/4 R -/2 2 Valve size 5/8 3/4 3/4 -/2 2 Pipe size 3/4 3/4 -/2 2 B Ball Straight Service Valve - F.I.P. x F.I.P. suffix to catalog number (B ) Catalog size 3/4R 3/4 x3/4 R Catalog size -/2 2 BALL STRAIGHT SERVICE VALVES 3/4"-2" SIZES P-2546 Ball Straight Service Valve - MUELLER Pack Joint Connection for CTS O.D.* tubing - both ends 360º turn option available by adding -3 suffix to catalog number (P ) Catalogsize 3/4R 3/4 R -/2 2 Valve size 5/8 3/4 3/4 -/2 2 Pipe size 3/4 3/4 -/2 2 P-2570 Ball Straight Service Valve - MUELLER Pack Joint Connection for CTS O.D.* tubing x F.I.P. suffix to catalog number (P ) Catalogsize 3/4R 3/4 3/4x R x3/4r -/2 2 Valve size 5/8 3/4 3/4 3/4 3/4 -/2 2 Pipe size 3/4 3/4 -/2 2 B-2543 Catalog size 3/4R Valve size 5/8 Pipe size 3/4 Ball Straight Service Valve Copper flare nut - both ends suffix to catalog number (B ) Catalog size 3/4R 3/4 R -/2 2 Valve size 3/4 3/4 3/4 -/2 2 Pipe size 3/4 3/4 -/2 2 B-2568 B Catalog size Ball Straight Service Valve - F.I.P. x Copper flare nut suffix to catalog number--4-3/8" laying length for retrofit applications Ball Straight Service Valve F.I.P. x F.I.P. suffix to catalog number--3-3/6" end-to-end dimension for retrofit applications 3/4R * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. The "R" indicates this valve has a reduced port. The port size is one nominal size smaller than the valve inlet/outlet.

7 BALL STRAIGHT SERVICE VALVES 3/4"-2" SIZES 8D.7 Shaded area indicates change V Catalog size Valve size Pipe size Ball Straight Service Valve - MUELLER Pack Joint Connection for for IPS* PVC pipe- both ends 360º turn option available by adding -3 suffix to catalog number (V ) B-2530 MUELLER 0 Compression Connection for CTS O.D.* tubing x F.I.P. suffix to catalog number (B ) Catalog size 3/4R 3/4 Valve size 3/4 3/4 Pipe size 3/4 3/4 V-2508 Ball Straight Service Valve - MUELLER Pack Joint Connection for IPS* PVC pipe x F.I.P. suffix to catalog number (V ) Catalog size -/2 2 Valve size -/2 2 Pipe size -/2 2 * See charts on pages 8D.7 and 8D.8 for tubing that may be used with these connections.

8 8D.8 STRAIGHT SERVICE VALVES - 3/4"& " H-570 MUELLER MARK II ORISEAL Straight Service Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x F.I.P. P-570 MUELLER MARK II ORISEAL Straight Service Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x F.I.P. Catalog size 3/4 Catalog size 3/4 H-595 MUELLER MARK II ORISEAL Straight Service Valve MUELLER INSTA-TITE Connection for IPS* PE pipe x F.I.P. H-597 MUELLER MARK II ORISEAL Straight Service Valve MUELLER INSTA-TITE Connection for CTS O.D.* tubing x F.I.P. Catalog size 3/4 Catalog size 3/4 H-566 MUELLER MARK II ORISEAL Straight Service Valve Copper flare nut x F.I.P. Catalog size 3/4 H-0200 MUELLER MARK II ORISEAL Straight Service Valve F.I.P. x F.I.P. Catalog size 3/4 * See charts on pages 8D.7 and 8D.8 for tubing that may be used with these connections.

9 STRAIGHT METER VALVES - 3/4"-2" 8D.9 H-4348 MUELLER MARK II ORISEAL Straight Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** Quarter turn check P-4348 MUELLER MARK II ORISEAL Straight Meter Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x meter swivel nut** Quarter turn check Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 H-4350 MUELLER MARK II ORISEAL Straight Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** P-4350 MUELLER MARK II ORISEAL Straight Meter Valve MUELLER Pack Joint Connection for CTS O.D.* tubing x meter swivel nut** Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 H-433 MUELLER MARK II ORISEAL Straight Meter Valve MUELLER 0 Compression Connection for IPS PE* plastic pipe x meter swivel nut** Quarter turn check Catalog size 3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 H-4352 MUELLER MARK II ORISEAL Straight Meter Valve Copper flare nut x meter swivel nut** Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 H-4337 MUELLER MARK II ORISEAL Straight Meter Valve F.I.P. x meter flange H-435 MUELLER MARK II ORISEAL Straight Meter Valve F.I.P. x meter swivel nut** - Example: H Catalog size 2 Meter size -/2 or 2 Pipe size 2 Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 * See charts on pages 8D.7 and 8D.8 for tubing that may be used with these connections. ** Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number. These valves have meter flanges double drilled to fit either -/2" or 2" meters.

10 8D.0 STRAIGHT METER VALVES - 3/4"-2" H-4340 MUELLER MARK II ORISEAL Straight Meter Valve Copper flare nut x meter swivel nut** Quarter turn check H-4345 MUELLER MARK II ORISEAL Straight Meter Valve Copper flare nut x meter swivel nut** Quarter turn check Catalog size 3/4 Meter size 5/8x3/4, 3/4 Tubing size 3/4 Catalog size Valve size Pipe size * See charts on pages 8D.7 and 8D.8 for tubing that may be used with these connections. ** Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number.

11 GROUND KEY ANGLE METER VALVES 3/4" & " Ground key angle meter stop MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** 80 turn check - lock wing 8D. Ground key angle meter stop MUELLER Pack Joint Connection for CTS O.D.* tubing x meter swivel nut** 80 turn check - lock wing H-4258 Catalog size 5/8x3/4 5/8x3/4x3/4 5/8x3/4x Meter size 5/8 5/8x3/4, 3/4 5/8x3/4, 3/4 Pipe size 3/4 3/4 P-4258 Catalog size 5/8x3/4x3/4 5/8x3/4x Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 H-4259 Ground key angle meter stop MUELLER 0 Compression Connection for IPS PE* plastic pipe x meter swivel nut** 80 turn check - lock wing Catalog size 5/8x3/4x3/4 5/8x3/4x Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Pipe size 3/4 H-4266 Ground key angle meter stop MUELLER INSTA-TITE Connection for IPS PE* plastic pipe x meter swivel nut** 80 turn check - lock wing Catalog size 5/8x3/4x3/4 5/8x3/4x Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Pipe size 3/4 H-4267 Ground key angle meter stop MUELLER INSTA-TITE Connection for CTS O.D.* PE plastic tubing x meter swivel nut** 80 turn check - lock wing Catalog size 5/8x3/4x3/4 5/8x3/4x Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 Pipe size 3/4 H-4255 Ground key angle meter stop Copper flare nut x meter swivel nut** 80 turn check - lock wing Catalog size 5/8x3/4 5/8x3/4x3/4 5/8x3/4x Meter size 5/8 5/8x3/4, 3/4 5/8x3/4, 3/4 Tubing size 3/4 3/4 Ground key angle meter stop F.I.P. x meter swivel nut** 80 turn check - lock wing H-4265 Catalog size 5/8x3/4 5/8x3/4x3/4 5/8x3/4x Meter size 5/8 5/8x3/4, 3/4 5/8x3/4, 3/4 Pipe size 3/4 3/4 * See charts on pages 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. ** Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number.

12 8D.2 GROUND KEY ANGLE METER VALVES & SERVICE VALVES - 3/4"-2" H-4277 Ground Key Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter flange 80 turn check - lock wing Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 H-4276 Ground Key Angle Meter Valve Copper flare nut x meter flange 80 turn check - lock wing Ground Key Angle Meter Valve Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 P-4277 MUELLER Pack Joint Connection for CTS O.D.* tubing x meter flange 80 turn check - lock wing Ground Key Angle Meter Valve Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 H-4286 F.I.P. x meter flange 80 turn check - lock wing MUELLER Solid Tee Head Catalog size -/2 2 Meter size -/2 -/2, 2 Pipe size -/2 2 F.I.P. x F.I.P. 80 turn check - lock wing Ground Key Angle Meter Valve Roundway Meter Stop F.I.P. x F.I.P. 360 turn - lock wing H-4285 Catalog size 3/4 H-028 Catalog size /2 * See charts on pages 8D.7 and 8D.8 for tubing that may be used with these connections. These valves have meter flanges double drilled to fit either -/2" or 2" meters.

13 IN-LINE CHECK VALVES 8D.3 H-424 Straight dual check valve Inlet: M.I.P. Outlet: F.I.P. To order ASSE approved model add suffix -A to catalog number H-4243 Straight dual check valve Inlet: F.I.P. Outlet: F.I.P. To order ASSE approved model add suffix -A to catalog number Catalog size 3/4x Pipe size 3/4 in, out Catalog size 3/4 3/4x -/2, 2, Pipe size 3/4 3/4 in, out -/2 2 H-4242 Straight dual check valve Inlet: Meter swivel nut* Outlet: F.I.P. To order ASSE approved model add suffix -A to catalog number Catalog size 5/8x3/4x3/4 5/8x3/4x -/2, 2, Meter size 5/8x3/4, 3/4 5/8x3/4, 3/4 -/2 -/2, 2 Pipe size 3/4 -/2 2 H-4283 Catalog size 3/4 Pipe size 3/4 Straight dual check valve Inlet: M.I.P. Outlet: MUELLER 0 Conductive Compression Connection for CTS O.S. ** tubing. To order ASSE approved model add suffix -A to catalog number H-4282 Catalog size 3/4 Pipe size 3/4 Straight dual check valve Inlet: M.I.P. Outlet: M.I.P. To order ASSE approved model add suffix -A to catalog number * Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number. ** See charts on page 8D.7 and 8D.8 for tubing and pipe that can be used with this connection. These valves have meter flanges double drilled to fit either -/2" or 2" meters. These 3/4"x", -/2" and 2" sizes are not available as ASSE approved. These have meter flanges for -/2" meters

14 8D.4 Shaded area indicates change H-4269 Angle Meter Dual Check Valve Inlet: Meter swivel nut* Outlet: MUELLER 0 Conductive Compression Connection for CTS O.D.** tubing. To order ASSE approved model add suffix -A to catalog number ANGLE METER & TOP ENTRY VERTICAL DUAL CHECK VALVES P-4269 Angle Meter Dual Check Valve Inlet: Meter swivel nut* Outlet: MUELLER 0 Pack Joint Connection for CTS O.D.** tubing. To order ASSE approved model add suffix -A to catalog number Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 H-4462-A Top entry vertical dual check valve ASSE approved Inlet: Meter swivel nut* Outlet: MUELLER 0 Conductive Compression Connection for CTS O.D.** tubing To order test valve feature add suffix (-05) to catalog number H-4244 Angle dual check valve Inlet: Meter swivel nut* Outlet: F.I.P. To order ASSE approved model add suffix -A to catalog number Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 Catalog size 5/8x3/4 5/8x3/4x3/4 -/2, 2, Meter size 5/8 5/8x3/4, 3/4 -/2 -/2, 2 Pipe size 3/4 3/4 -/2 2 H-446-A Top entry vertical dual check valve ASSE approved Inlet: Meter swivel nut* Outlet: Copper flare nut To order test valve feature add suffix (-05) to catalog number H-4460-A Top entry vertical dual check valve ASSE approved Inlet: Meter swivel nut* Outlet: F.I.P To order test valve feature add suffix (-05) to catalog number Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 Catalog size 5/8x3/4x3/4* * Meter size 5/8x3/4, 3/4 Pipe size 3/4 2*** -/2 or 2 2 H-4463-A Top entry vertical dual check valve ASSE approved Inlet: Meter swivel nut* Outlet: M.I.P To order test valve feature add suffix (-05) to catalog number Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 P-4462-A Top entry vertical dual check valve ASSE approved Inlet: Meter swivel nut* Outlet: MUELLER Pack Joint Connection for CTS O.D.** tubing To order test valve feature add suffix (-05) to catalog number Catalog size 5/8x3/4x3/4 Meter size 5/8x3/4, 3/4 Pipe size 3/4 * Meter swivel nuts are regularly furnished with a saddle feature to aid in meter installation and removal. A plain swivel nut is available as an option by adding a suffix of - to the catalog number. **See charts on pagse 8D.7 and 8D.8 for tubing that may be used with these connections. ***Valves with meter flanges double drilled to fit either -/2" or 2" meters

15 DUAL CHECK REPAIR KITS AND OPTIONAL PARTS AND ACCESSORIES Repair kit for REGULAR dual check valves. Not for use on top entry vertical style. 8D.5 Repair kit for ASSE APPROVED regular dual check valves. Not for use on top entry vertical style. Catalog number Valve size 5/8 or 5/8x3/4 or 3/4 -/2 or 2 Catalog number Valve size 5/8 or 5/8x3/4 or 3/4 Catalog number Valve size 3/4 Repair kit for M-98 top entry vertical style checks /2 or 2 B " Brass square wrench nut adapter For use on MUELLER 300 Ball Valves and ground key valves - one size fits both 3/4" and " valves. H-0298 Brass straight lever handle For use on MUELLER MARK II ORISEAL Curb Valves and MUELLER ORISEAL III Curb Valves. H-4339 Brass angle lever handle For use on MUELLER MARK II ORISEAL Curb Valves and MUELLER ORISEAL III Curb Valves. 3/4" " * B Brass straight lever handle For use on MUELLER 300 Ball Curb Valves - one size fits both 3/4" and " valves. 4.25" overall handle length. 3/4" "* B Brass angle lever handle For use on Ball Curb Valves - one size fits both 3/4" and " valves. B Brass straight lever handle For use on MUELLER 300 Ball Curb Valves - one size fits both 3/4" and " valves. 3.2" overall handle length for use in confined areas where longer handle will not work. B "RECLAIMED WATER" straight lever handle, with marking and standard color for positive identification. For use on Ball Valves - one size fits both 3/4" and " valves. 3.2" overall handle length for use in confined areas. To order test valve feature add suffix (-05) to catalog number. Example: H-4462-A-05 RECLAIMED WATER STYLE: Valves area available marked for "reclaimed water" by adding "-20" to the catalog number. Example: B Test Drain Option *Fits -/2" and 2" Ball Valves

16 8D.6 COPPER FLARE TOOLS AND MISCELLANEOUS EQUIPMENT Copper flare connection optional equipment Copper flare nut Solid copper disc Brass cap CATALOG NUMBER: H-5430 /2" 3/4" " -/4" -/2" 2" Flaring tool Used with regular copper flare nut to shut off line. CATALOG NUMBER: H-5535 /2" 3/4" " -/4" -/2" 2" Drilled flaring tool Fits on copper flare spud to cap off line. CATALOG NUMBER: H /4" " Reamer Used to make 45 flare on type "K" copper tubing. CATALOG NUMBER: H-8000 /2" 3/4" " -/4" -/2" 2" Used to make 45 flare on type "K" copper tubing without shutting off water--drilled to exhaust water at right angle to tubing. CATALOG NUMBER: H /4" " 3/4" Used to ream the inside of type "K" copper tubing to remove burrs prior to flaring. CATALOG NUMBER: H-800 Brass Hammer Solid brass head with 0" wooden handle. Weight 2-3/4 lb. CATALOG NUMBER: H-8025 Note: When using any striking tool, safety eye protection must be worn. Inspect hammer and tools for any damage after each use and repair or replace if mushrooming or chipping is evident.

17 MUELLER 0 COMPRESSION CONNECTION INFORMATION AND KITS 8D.7 Tubing, pipe and liners used with MUELLER 0 Compression Nominal Size of Connection 3/4" CTS " CTS -/2" CTS 2" CTS 3/4" IPS " IPS Material Tubing or Pipe O.D. range - Inches Tubing of Pipe Wall Thickness range - Inches Tubing or Pipe I.D. Range - Inches Liner Part Number Type K copper Polyethylene PE Type K copper Polyethylene PE Type K copper Polyethylene PE Type K copper Polyethylene PE Polyethylene PE /4" Sch. 40 PVC /4" Sch. 80 PVC Polyethylene PE Type "K" copper tubing per ASTM B888. CTS polyethylene (PE) per ASTM D-2737 SDR-9 IPS polyethylene (PE) per ASTM D-2239 PE SIDR-7 Polyvinylchloride (PVC) per ASTM D785 MUELLER 0 Compression Connection replacement parts Size Gasket part number Connection nut 3/4" CTS " CTS /4" IPS " IPS /2" CTS " CTS Gasket and gripper band assembly. Gasket Assembly Adapter Nut for pre-976 style Mueller 0 Compression Connection for CTS tubing Kit includes one standard Gasket (same used with current style 0 connections) and a special Nut that adapts to the older style connection threads on the fittings. It is installed in the same way as the current style connection (Gasket conductor spring should be toward fitting body). Size Connection kit 3/4" CTS " CTS Nut

18 8D.8 Pack Joint Connection Kits MUELLER PACK JOINT & INSTA-TITE CONNECTION INFORMATION AND KITS (includes nut, gasket and washer) Nominal Size of Connection Tubing or Pipe O.D. range - Inches Tubing of Pipe Wall Thickness range - Inches Tubing or Pipe I.D. Range - Inches 3/4" CTS " CTS /2" CTS " CTS Part Number 3/4" & " size kits (CTS only) will interchange with valves or fittings using Mueller 0 Compression Connections (CTS). -/2" & 2" size kits are not interchangeable with valves or fittings presently using Mueller 0 Compression Connections (CTS). The -/2" & 2" sizes should only be used as replacements for products currently using Mueller Pack Joint Connections (CTS). Tubing, pipe & liners for MUELLER Pack Joint Connection (not required for Type "K" Copper Pipe) Pack Joint Kit Nominal Size of Connection Tubing or Pipe O.D. range - Inches Tubing of Pipe Wall Thickness range - Inches Tubing or Pipe I.D. Range - Inches Length of Liner (in inches) 3/4" CTS PE " CTS PE /2" CTS PE " CTS PE Part Number Polyethylene PE Tubing and pipe used with MUELLER INSTA-TITE Connections Nominal size of connection Material Tubing or pipe O.D. range - inches Tubing or pipe wall thickness range - inches Tubing or pipe I.D. range - inches 3/4" CTS Polyethylene PE " CTS Polyethylene PE /4" IPS Polyethylene PE " IPS Polyethylene PE CTS Polyethylene (PE) per ASTM D-2737 SDR-9 IPS polyethylene (PE) per ASTM D-2239 PE SIDR-7 MUELLER INSTA-TITE Connection replacement parts Size Gripper ring part number 3/4" CTS (red gripper) " CTS (red gripper) /4" IPS (white gripper) " IPS (white gripper) O-Ring part number Gripper ring O-ring Optional tools for use with MUELLER INSTA-TITE Connections Pipe beveling tool To assure proper installation, the end of the pipe or tubing must be properly beveled before it is installed into the MUELLER INSTA-TITE Connection. MUELLER CO. offers a special beveling tool for both CTS PE tubing and IPS PE pipe. PART NUMBER: H-805 for 3/4" and " CTS tubing. PART NUMBER: H-807 for 3/4" and " IPS pipe Pipe removal tool Pipe or tubing may be removed from the MUELLER INSTA- TITE Connection using special removal tools. Use one tool for 3/4" size connection and two tools for " size. PART NJMBER: