DRESSER TM PIPELINE SOLUTIONS

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "DRESSER TM PIPELINE SOLUTIONS"

Transcription

1 Wal-Rich Corporation is a master distributor of Dresser Pipeline Solutions, a trademark of GE. The following pages highlight the items that are in stock at our NY facility. For more information, please contact our Dresser Product Specialists at (800) You can find specification sheets for Dresser products by visiting the following page: 1

2 For Water STYLE 38 COUPLINGS FOR STEEL PIPE Anatomy of a Style 38 Dresser Coupling Water Water Water Steam Size [OD] Armored Plain Low Pressure Steam ½" IPS [.84] ¾" IPS [1.05] 1" IPS [1.32] 1¼" IPS [1.66] 1½" IPS [1.90] 2" IPS [2.38] 2½" IPS [2.88] 3" IPS [3.50] 3½" IPS [4.00] 4" IPS [4.50] 5" IPS [5.563] 6" IPS [6.63] 8" IPS [8.63] 10" IPS [10.75] 12" IPS [12.75] All Style 38 s feature a Fusion-Bonded Epoxy Coating to prevent corrosion, except for Steam Couplings (Red Shop Coat) - All Style 38 s have corrosion-resistant alloy bolts and nuts (5/8 x 8 1/4 ) - Wal-Rich stocks all Style 38 s with 5 long middle rings (the body of the coupling) - For special sizes or configurations, call our Dresser Specialists at

3 For Water STYLE 65 GALVANIZED COMPRESSION FITTINGS FOR STEEL PIPE Diameter ½" Short #65 Coupling ¾" Short #65 Coupling " Short #65 Coupling ¼" Short #65 Coupling ½" Short #65 Coupling " Short #65 Coupling Diameter ½" Long #65 Coupling ¾" Long #65 Coupling Long #65 Coupling ¼" Long #65 Coupling ½" Long #65 Coupling " Long #65 Coupling Diameter ½" #65 90 Elbow ¾" #65 90 Elbow #65 90 Elbow ¼" #65 90 Elbow ½" #65 90 Elbow " #65 90 Elbow Armored kets Water Diameter ½" #65 Male Adapter ¾" #65 Male Adapter #65 Male Adapter ¼" #65 Male Adapter ½" #65 Male Adapter " #65 Male Adapter - For Water. Rated to 150 PSI, at temperatures up to 150 degrees 3

4 For Water STYLE 90 COMPRESSION FITTINGS FOR STEEL PIPE (SEAL-ONLY) ¾" Style 90 Coupling " Style 90 Coupling ¼" Style 90 Coupling ½" Style 90 Coupling " Style 90 Coupling ¾" Style 90 Elbow " Style 90 Elbow ¼" Style 90 Elbow ½" Style 90 Elbow " Style 90 Elbow ¾" Style 90 Male Adptr " Style 90 Male Adptr ¼" Style 90 Male Adptr ½" Style 90 Male Adptr " Style 90 Male Adptr - Max Temp: Standard Seal-Only Style 90 Fittings can be used for water and gas service where allowed by local codes. Style 90 Standard Seal couplings are seal-only ket Armored ket Water 4

5 For Water STYLE 118 HANDIBAND CLAMPS 3 ONE BOLT CLAMPS 6 TWO BOLT CLAMPS Water Diameter x Length ½" x 3" Single Bolt ¾" x 3" Single Bolt " x 3" Single Bolt ¼" x 3" Single Bolt ½" x 3" Single Bolt " x 3" Single Bolt ½" x 3" Single Bolt " x 3" Single Bolt " x 3" Single Bolt x 3 Single Bolt x 3 Single Bolt x 3 Single Bolt Diameter x Length ½" x 6" Double Bolt ¾" x 6" Double Bolt " x 6" Double Bolt ¼" x 6" Double Bolt ½" x 6" Double Bolt " x 6" Double Bolt ½" x 6" Double Bolt " x 6" Double Bolt " x 6" Double Bolt x 6 Double Bolt x 6 Double Bolt 12 TWO BOLT CLAMPS Lugs: Ductile Iron Band: Stainless Steel Bolts: Brass-Plated Alloy Steel ket: Grade 304 material can be used with water, air, oils, aromatic & aliphatic hydrocarbons, gasoline, & natural gas. Diameter x Length " x 12" Double Bolt " x 12" Double Bolt " x 12" Double Bolt x 12 Double Bolt x 12 Double Bolt - Max Temp: 150 F 5

6 For Water STYLE 360 ALL-AROUND REPAIR CLAMPS Available in 7.5 and 12.5 lengths Water Lugs: Ductile Iron Band: Stainless Steel Bolts: Brass-Plated Alloy Steel ket: Grade 304 material can be used with water, air, oils, aromatic & aliphatic hydrocarbons, gasoline, & natural gas. - Max Temp: 150 F for STEEL/PVC [OD] For COPPER [OD] For CAST/DUCTILE [OD] 7.5 LONG CLAMPS [2.375] [3.50] [4.50] [6.63] [8.63] [10.75] [12.75] /2 CTS [2.63] CTS [3.13] CTS [4.13] DIP [ ] DIP [ ] DIP [ ] DIP [ ] DIP [ ] DIP [ ] 12.5 LONG CLAMPS [2.375] [3.50] [4.50] [6.63] [8.63] [10.75] [12.75] /2 CTS [2.63] CTS [3.13] CTS [4.13] DIP [ ] DIP [ ] DIP [ ] DIP [ ] DIP [ ] DIP [ ] 6

7 For STYLE 39 COUPLING FOR STEEL--INSULATED, FOR GAS APPLICATIONS Insulating Sleeve Copper Stubout for anode connection Insulating Sleeve, ket, & Spacer Insulating Sleeve " IPS One-End ½" IPS One-End " IPS One-End " IPS One-End " IPS One-End " IPS One-End - Features rubber insulating sleeve and anode for conductivity - Fusion-bonded epoxy coat. - Style 39 couplings are Seal-Only --for aboveground use (meter set) STYLE 711 BOLTED COUPLINGS WITH RESTRAINING SEAL FOR STEEL PIPE Copper Stubout for anode connection Pullout Prevention Products IPS - Steel Pipe IPS - Steel Pipe IPS - Steel Pipe Yellow Seal & Restraint ID Band Restraining Ring tightens to prevent pipe pullout IPS - *PE* SDR IPS - *PE* SDR IPS - *PE* SDR IPS - *PE* SDR-11 - furnished with 2 heavy steel stiffeners 7

8 For STYLE 90 SEAL ONLY FITTING FOR STEEL PIPE, INSULATED FOR GAS 1/8 tap ¾" Insulated Coupling " Insulated Coupling ¼" Insulated Coupling ½ Insulated Coupling " Insulated Coupling - Insulating sleeve and spacer to conform to local codes. - Seal Only--no restraint ¾" Insulated Cplg w/ Tap " Insulated Cplg w/ Tap ¼" Insulated Cplg w/ Tap ½" Insulated Cplg w/ Tap " Insulated Cplg w/ Tap - Insulated coupling with 1/8" tapping to meet Con Ed specs. - Heavy-duty machined-steel body. - Seal Only--no restraint ¾" Insulated Elbow " Insulated Elbow ¼" Insulated Elbow ½" Insulated Elbow " Insulated Elbow - Seal Only--no restraint. Insulating Sleeve, ket, & Spacer 8

9 For UNIVERSAL STYLE 90 COUPLINGS WITH RESTRAINING SEAL Pullout Prevention Products ket Steel Gripping Ring FOR STEEL ¾" Universal Coupling " Universal Coupling ¼" Universal Coupling ½" Universal Coupling " Universal Coupling - Seal & Restraint coupling Upon tightening nut, gasket compresses to create seal and steel rings grip pipe to prevent pullout. FOR POLYETHYLENE Furnished with stiffeners SDR ¾" 11 Universal " 11 Universal ¼" 10 Universal ½" 11 Universal " 11 Universal - Seal & Restraint coupling Steel Gripping Ring 9

10 For Hi-Temp Applications STYLE 38 HI-TEMP COUPLINGS Max Temp: 1200 Carded Glass ket Steam OD ½" IPS [.84] ¾" IPS [1.05] 1" IPS [1.32] 1¼" IPS [1.66] 1½" IPS [1.90] 2" IPS [2.38] 2½" IPS [2.88] 3" IPS [3.50] 3½" IPS [4.00] 4" IPS [4.50] 5" IPS [5.563] 6" IPS [6.63] 8" IPS [8.63] 10" IPS [10.75] 12" IPS [12.75] - Carded Fiberglass. Withstands temperatures to Please note: the non-resilient characteristic of carded fiberglas gaskets can result in a nonleakproof seal. STYLE 90 HI-TEMP COUPLINGS ½" Style 90 - Hi Temp ¾" Style 90 - Hi Temp " Style 90 - Hi Temp ¼" Style 90 - Hi Temp ½" Style 90 - Hi Temp " Style 90 - Hi Temp Max Temp: 1200 Carded Glass ket Steam - Carded Fiberglass. Withstands temperatures to Please note: the non-resilient characteristic of carded fiberglas gaskets can result in a nonleakproof seal. 10

11 STYLE 175 GTO/CURB VALVES ¾" #175 GTO Valve " #175 GTO Valve ¼" #175 GTO Valve ½" #175 GTO Valve " #175 GTO Valve - FIP x FIP - Tamper-proof design - 1/4 Turn STYLE 275 LOCK WING METER VALVES ¾" #275 Lockwing " #275 Lockwing ¼" #275 Lockwing - FIP x FIP - Tamper-proof design STYLE 91 SERVICE SADDLES X 1 Double-Stirrup " X 1 1/4" Double-Stirrup " X 1 1/2" Double-Stirrup - Max Temp 212 Water 11

12 Parts for Style 38 Couplings WATER SERVICE Plain Grade 27 Buna-S gasket / /4" " /4" / / / GAS SERVICE Armored Grade 27 Buna-S gasket. Brass coil provides additional conductivity / /4" " /4" / / / OIL SERVICE Grade 42 BUNA-N kets for fuel oil & gasoline / / HI-TEMP CARDED GLASS For steam & air applications up to Please note: the nonresilient characteristic of carded fiberglass gaskets can result in a non-leakproof seal / /4" " /4" / / / NUTS & BOLTS Dresserloy Carbon Steel Epoxycoated bolts & nuts /8 x 8 1/4 Nut & Bolt /8 x 10 3/4 Nut & Bolt - Also available in 304 Stainless Steel and 316 Stainless Steel

Ductile Iron Pipe Couplings

Ductile Iron Pipe Couplings J-9 Pipe 1 2 Straight and Transition Ductile offer an easy and economical way of joining whether the is of the same nominal and/or type or different at each coupling. couplings will handle most of your

More information

WATER & SEWER CORROSIVE RESISTANT PRODUCTS

WATER & SEWER CORROSIVE RESISTANT PRODUCTS WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING

More information

Hose Clamps & Fittings

Hose Clamps & Fittings All Stainless Steel Marine or Underground Hose Clamps 5/16 HEX HEAD SCREW 60000 SERIES Highly corrosion resistant Use for marine or underground applications Stainless Steel Band, Housing Plated Steel Screw

More information

CONSTRUCTION MATERIALS DIVISION 15 Construction Materials - Water Mains Section _Jan12_2016.pdf Page 1 of 18 INDEX

CONSTRUCTION MATERIALS DIVISION 15 Construction Materials - Water Mains Section _Jan12_2016.pdf Page 1 of 18 INDEX 15001_Jan12_2016.pdf Page 1 of 18 INDEX Page 15001-1 WATER MAIN PRESSURE PIPE 3 1.1 Polyvinyl Chloride (PVC) Water Pipe (150mm 300mm) 3 1.2 Polyvinyl Chloride (PVC) Large Diameter Water Pipe (350mm - 1200mm)

More information

1-800-654-3872 1-405-273-6302

1-800-654-3872 1-405-273-6302 Anodeless Risers Transition Risers Compression Risers Riser Accessories Transition Risers and Transitions The Right Connection 1-800-654-3872 1-405-273-6302 www.centralplastics.com Risers and Transitions:

More information

Quality is Central. Gas Water & Waste Water Energy Industrial. Leaders in Transition

Quality is Central. Gas Water & Waste Water Energy Industrial. Leaders in Transition Quality is Central. Quality at Georg Fischer Central Plastics is backed by the most extensive research and development, quality assurance and in-house testing programs in the industry. Leaders in Transition

More information

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING

60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING 60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed

More information

Technical Note PP 811-TN PE Flange Connections

Technical Note PP 811-TN PE Flange Connections Technical Note PP 811-TN PE Flange Connections Flange Connection Flanged joints are made using a DriscoPlex Flange Adapter that is fused to the pipe then joined to a mating flange adapter or a mating appurtenance

More information

Pipe Repair Products. For Water, Wastewater and Industrial Piping Systems. Custom Fabrication

Pipe Repair Products. For Water, Wastewater and Industrial Piping Systems. Custom Fabrication Pipe Repair Products For Water, Wastewater and Industrial Piping Systems Repair Sleeves Reinforcing Sleeves Repair Clamps Band Clamps Collar Clamps Bell Joint Clamps Custom Fabrication For Complete Water

More information

WATER DISTRIBUTION PRODUCTS PVC WATER FITTINGS

WATER DISTRIBUTION PRODUCTS PVC WATER FITTINGS WATER DISTRIBUTION PRODUCTS PVC WATER FITTINGS CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

Dresser * Pipeline Solutions

Dresser * Pipeline Solutions GE Oil & Gas Dresser * Pipeline Solutions Repair products for natural gas piping systems GE Oil & Gas offers natural gas pipeline industry customers an array of high-pressure repair products and solutions,

More information

Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION

Mueller. Pipe Repair Products. A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION Mueller Pipe Repair Products A complete selection for all types of gas lines... all from a single source. GAS PRODUCTS DIVISION MUELLER STAINLESS STEEL REPAIR CLAMPS Mueller offers a full line of stainless

More information

JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS

JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS JCM TAPPING SLEEVES MORE SELECTION, BENEFITS, OPTIONS Specifying the right tapping sleeve for the condition of the job is the best way to assure a successful tap. JCM s are readily available in a wide

More information

MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water

MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water MS-3/2009 HDPE (High Density Polyethylene) Pipe and Fittings Specification for Buried Potable Water 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org HDPE

More information

Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source.

Mueller. Pipe Repair Products. Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. Mueller Pipe Repair Products Saddles Tapping Sleeves Pipe Repair Clamps A complete selection for all types of pipe... all from a single source. SERVICE SADDLES Mueller service saddles, available in bronze,

More information

Georg Fischer Waga N.V. Bell joint leak clamp for under pressure repair of bell joints and sleeve joints DN80 - DN700 WAL/V

Georg Fischer Waga N.V. Bell joint leak clamp for under pressure repair of bell joints and sleeve joints DN80 - DN700 WAL/V Georg Fischer Waga N.V. Bell joint leak clamp for under pressure repair of bell joints and sleeve joints DN80 - DN700 WAL/V WAL/V Many water and gas systems still consist of pipe lines connected with bell

More information

SECTION 13 WATER MAIN TAPS General

SECTION 13 WATER MAIN TAPS General SECTION 13 WATER MAIN TAPS 13-1.01 Scope 13-1 General This section describes the requirements for furnishing and installing water main taps using tapping saddles, couplings, and sleeves; including the

More information

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART

FLANGED FITTINGS OUR KNOWLEDGE SETS US APART OUR KNOWLEDGE SETS US APART Elbows Tees Crosses Wyes Reducers Flanges Converters Gaskets Nuts & Bolts TABLE OF CONTENTS Flange Details - Class 125............................................2 Designation

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267

8D.1 BALL ANGLE METER VALVES - 3/4 & 1 P-24258 B-24258 E-24259 B-24259 B-24266 B-24267 BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.

More information

Ford Pipe Repair Products The Ford Meter Box Company, Inc.

Ford Pipe Repair Products The Ford Meter Box Company, Inc. Section L 7/2008 Ford Pipe Repair Products The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487 Overseas FAX:

More information

Section 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011

Section 3510: Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 STANDARDS AND CONSTRUCTION MANUAL : Reclaimed water Pipes, Valves, and Appurtenances February 11, 2011 PART 1 - GENERAL 1.01 SCOPE OF WORK A. These specifications cover the pipes, fittings, and appurtenances

More information

Gas Distribution and Transportation

Gas Distribution and Transportation Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI

More information

SECTION 15105 DUCTILE IRON PIPE AND FITTINGS

SECTION 15105 DUCTILE IRON PIPE AND FITTINGS SECTION 15105 DUCTILE IRON PIPE AND FITTINGS PART 1 GENERAL.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of Owner facilities. Closely coordinate construction work and connections

More information

JCM JCM INDUSTRIES, INC. John Collins. John Collins Vice President of Sales JCM Industries Inc. February 11, To Our Valued JCM Customer,

JCM JCM INDUSTRIES, INC. John Collins. John Collins Vice President of Sales JCM Industries Inc. February 11, To Our Valued JCM Customer, JCM INDUSTRIES, INC. P. O. Box 20 - Nash, Texas 7559-20 Toll Free 00-527-42, Fax Toll Free 00-74-9524 Outside U.S. 903-32-251, Fax 903-3-20 www.jcmindustries.com February 11, 2013 To Our Valued JCM Customer,

More information

3. ASTM D Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds.

3. ASTM D Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds. SECTION 02623 PART 1 GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment, and incidentals required, and install polyvinyl chloride (PVC) waterline, fittings, service connections and appurtenances

More information

Mechanical Couplings for Joining Polyethylene Pipe TN-45/2012

Mechanical Couplings for Joining Polyethylene Pipe TN-45/2012 Mechanical Couplings for Joining Polyethylene Pipe TN-45/2012 105 Decker Court, Suite 825, Irving, TX 75062 P: 469-499-1044 F: 469-499-1063 www.plasticpipe.org Foreword This report was developed and published

More information

SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS

SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS SECTION 33 11 00.15 DUCTILE IRON PIPE AND FITTINGS PART 1: GENERAL 1.01 COORDINATION OF WORK Connection to existing pipelines may require shutdown of AW facilities. Closely coordinate construction work

More information

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.

A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 Building Services Piping. PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

Pipe Repair Products A complete selection for all types of pipe

Pipe Repair Products A complete selection for all types of pipe Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available

More information

General Guidelines for Repairing Buried PE Potable Water Pressure Pipes

General Guidelines for Repairing Buried PE Potable Water Pressure Pipes 515 General Guidelines for Repairing Buried PE Potable Water Pressure Pipes Introduction Traditional piping systems have gasket-sealed bell and spigot joints every 20 feet, which can be a potential maintenance

More information

JCM GENERAL PRODUCT DIRECTORY Effective March 1, 2010 Replaces 01/12/2007

JCM GENERAL PRODUCT DIRECTORY Effective March 1, 2010 Replaces 01/12/2007 JCM GENERAL PRODUCT DIRECTORY Effective March 1, 20 Replaces 01//2007 UNIVERSAL CLAMP COUPLINGS / REPAIR FITTINGS Page 1 Universal Clamp Coupling - Standard Range...4-2 Universal Clamp Coupling - Extended

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves THE FORD METER BOX COMPANY, INC. ISO 9001:2008 10002505 Section AA 02/2015 Web Revision 12/17/2015 Ford Service Saddles and Tapping Sleeves Contents Page Recommended Product Application *Steel *C900 Cast

More information

American- Darling 5¼" B-84-B-5.

American- Darling 5¼ B-84-B-5. -5 Sealed Lubrication Chamber Seals operating threads from water and debris which greatly reduces routine maintenance. Top Travel Stop Nut Helps prevent stem buckling and damage to bronze components which

More information

08003-1 WATER SERVICE 2

08003-1 WATER SERVICE 2 08003_Mar08_2011.pdf Page 1 of 7 INDEX Page 08003-1 WATER SERVICE 2 1.1 Pipe 2 1.1.1 Copper 2 1.1.2 Polyethylene 2 1.2 Valves and Fittings 2 1.2.1 Main Stops 3 1.2.2 Curb Stops 3 1.2.3 Curb Box 3 1.2.4

More information

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer

Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer Model Specification 509 DRISCOPLEX 4200 and DRISCOPLEX 4300 Gravity Flow Sanitary Sewer The user may choose to adopt part or all of this Model Specification; however, the user should ensure that all parts

More information

SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL

SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL SECTION 02110 - ASBESTOS CEMENT PIPE REPAIRS, DEMOLITION, AND DISPOSAL PART 1 - GENERAL 1.1 WORK INCLUDED IN THIS SECTION A. The WORK of this Section includes the repair, demolition, and disposal of asbestos

More information

RING JOINT SYSTEMS 207

RING JOINT SYSTEMS 207 RING JOINT SYSTEMS 07 08 Table of Contents Model R-88 Pages 10-11 Model R-88 Large Diameter Page 1 Model RH-1000 1000 PSI Coupling Page 13 Model RX-3000 3000 PSI Coupling Page 1 Model RX-3770 3770 PSI

More information

Pipe Repair Products A complete selection for all types of pipe

Pipe Repair Products A complete selection for all types of pipe Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available

More information

Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.

Double-Headed Screw 1. 3/4 FIP x 3/4 MIP x 1/4 hole 2. 3/4 Fip x 3/4 MIP. Feed Water Connector 1. 1/2 FIP x 1/2 MIP x 1/4 OD 2. 3. Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass

More information

SECTION 02401 - SANITARY SEWER PIPE

SECTION 02401 - SANITARY SEWER PIPE PART 1 - GENERAL 1.1 DESCRIPTION A. The WORK under this Section includes providing all labor, materials, tools and equipment necessary for furnishing and installing sanitary sewer pipe, in accordance with

More information

SECTION 8 AMERICAN. Flanged Pipe

SECTION 8 AMERICAN. Flanged Pipe SECTION 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either

More information

SECTION DIP AND PVC PIPE, FITTINGS, VALVES, AND APPURTENANCES

SECTION DIP AND PVC PIPE, FITTINGS, VALVES, AND APPURTENANCES SECTION 02600 DIP AND PVC PIPE, FITTINGS, VALVES, AND APPURTENANCES PART 1 GENERAL 1.01 DESCRIPTION OF WORK: A. This section includes the material and installation standards for pipe, fittings, valves,

More information

TECHNICAL SPECIFICATION

TECHNICAL SPECIFICATION THOMAS - G-FLEX GFLEX TECH SPEC CONNECTING INNOVATION JOHANNESBURG TEL: +27 11 794 7594 CAPE TOWN TEL: +27 21 556 5258 POLOKWANE TEL: 015 298 9142 DESIGNER, MANUFACTURER AND DISTRIBUTOR OF PIPE CONNECTION,

More information

Item No. Name of Part Item No. Name of Part Item No. Name of Part

Item No. Name of Part Item No. Name of Part Item No. Name of Part www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover

More information

SECTION 02563 SANITARY SEWER FORCE MAINS

SECTION 02563 SANITARY SEWER FORCE MAINS SECTION 02563 SANITARY SEWER FORCE MAINS 1.0 GENERAL A. Description Sanitary sewer force main installation shall include, but not necessarily be limited to, furnishing and installing pressure rated pipe,

More information

Forced Sewer Applications

Forced Sewer Applications Forced Sewer Applications #101-26921 Gloucester Way Langley, BC V4W 3Y3 Canada Phone: 855-292-8240 Fax: 604-381-2148 6460 SW 50th Terrace Ocala, FL 34474 USA Phone: 855-292-8240 Fax: 604-381-2148 Curb

More information

PIPE OUTSIDE DIAMETER GUIDE

PIPE OUTSIDE DIAMETER GUIDE May 21, 2015-1 PIPE OUTSIDE DIAMETER GUIDE PIPE OUTSIDE DIAMETER GUIDE - SMALL DIAMETER PIPE SIZES NOMINAL PIPE SIZES 1 /2" 3 /4" 1" 1 1 /4" 1 1 /2" 2" 2 1 /2" THIS O.D. GUIDE IS FOR YOUR CONVENIENCE &

More information

COMMON FAILURE MODES IN PRESSURISED PIPELINE SYSTEMS

COMMON FAILURE MODES IN PRESSURISED PIPELINE SYSTEMS COMMON FAILURE MODES IN PRESSURISED PIPELINE SYSTEMS The following tables summarise the most common types of field failure modes in water supply mains and pressure sewers and associated fittings and appurtenances.

More information

AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids

AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids AMERICAN Mechanical Joint Pipe For Water, Sewage or Other Liquids The AMERICAN Mechanical Joint was developed by the American Cast Iron Pipe Company and first marketed in 1929. Since that time, millions

More information

INDEX. Sec. No. Items Page Nos.

INDEX. Sec. No. Items Page Nos. INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............

More information

INDEX PAGE. 1 Company Profile. 2 Specifications. 3 Cascades Armour Plates. 4-5 Product Range. Products in-situ. 8 Product Range

INDEX PAGE. 1 Company Profile. 2 Specifications. 3 Cascades Armour Plates. 4-5 Product Range. Products in-situ. 8 Product Range Cascade INDEX PAGE 1 Company Profile 2 Specifications 3 Cascades Armour Plates 4-5 Product Range Centre Products in-situ 8 Product Range 9 Clamp Identification Chart 10-11 Sizes 12 Quality & Service 13

More information

James M. Pleasants Company

James M. Pleasants Company James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:

More information

Group 16. Hose Clamps Clamping Tools

Group 16. Hose Clamps Clamping Tools Group Hose Clamps Clamping Tools INDEX Page Contents 2 Index 3 KDC ( King Double Clamp ) Hose Clamps. Oetiker Clamps and Tools. 4 Heavy Duty Hose Clamps 5 Standard ABA Hose Clamps and Mini ABA Hose Clamps

More information

DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015

DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015 DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT Jim Riley, Texas A&M University February 10, 2015 Piping at Texas A&M 2 History of Distribution Piping at Texas A&M Concrete reinforced

More information

2013 Edition. Flanged fittings 30"-64" NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61

2013 Edition. Flanged fittings 30-64 NSF. industrial Applications, water & Wastewater. Certified to ANSI/NSF 61 30"-64" Ductile Iron industrial Applications, water & Wastewater 2 Table of Contents Flanged Fittings for Water 3 Flange Details 5 Flanged Fittings 6 90º and 45º Bend 6 22-1/2º and 11-1/4º Bends 7 Tees

More information

Anatomy of a Grooved Pipe Joint ANATOMY OF A GROOVED PIPE JOINT

Anatomy of a Grooved Pipe Joint ANATOMY OF A GROOVED PIPE JOINT The grooved piping system has been around for over 85 years, providing fast, easy, reliable piping assembly. While technology has changed application parameters cut grooving to roll grooving, standard

More information

TRICON STEEL-CON. System Specifications

TRICON STEEL-CON. System Specifications TRICON STEEL-CON System Specifications Pipe Size Insulation Thickness Steel Conduit O.D. 1 1½ 6.63 2 1½ 8.63 3 2 10.75 4 2 10.75 6 2 14.00 8 2½ 16.00 10 2½ 18.00 12 2½ 20.00 Based on a minimum 3-6 burial

More information

Mueller Super Centurion 250 Fire Hydrant

Mueller Super Centurion 250 Fire Hydrant Mueller Super Centurion 20 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 20 Fire Hydrant...20 psig rating, high flow, dependable performance, 10-year

More information

Quality & Innovation, Manufactured in the U.S.A.

Quality & Innovation, Manufactured in the U.S.A. Quality & Innovation, Manufactured in the U.S.A. Repair Clamps Couplings Expansion Joints Pipe Restraint Service Saddles Dismantling Joints Tapping Sleeves Tapping Machines HDPE Pipe Products Line-Stop

More information

GAS DISTRIBUTION PRODUCTS METER RISERS

GAS DISTRIBUTION PRODUCTS METER RISERS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer of connectors for the

More information

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description

Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard

More information

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe

Pipe and Tubing PIPE. Black and Galvanized Steel Pipe. Standard and Extra Strong Welded Steel Pipe Black and Galvanized Steel Pipe PIPE Wheatland Steel Pipe is made by specialists who understand that it s the small details that make the difference between average products and superior products. At the

More information

08.08 Vic-Check Valves

08.08 Vic-Check Valves The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc

More information

TCH ENGINEERING SPECIFICATIONS. Index. UL Classified V s, U s and Straight Flexible Connectors. Externally Pressurized Expansion Joints

TCH ENGINEERING SPECIFICATIONS. Index. UL Classified V s, U s and Straight Flexible Connectors. Externally Pressurized Expansion Joints Index UL Classified V s, U s and Straight Flexible Connectors Externally Pressurized Expansion Joints Flexible V and U Connectors Expansion Compensators Flexible Metal Braided Connectors PTFE Expansion

More information

HEGAWA The best connection for pipeline systems

HEGAWA The best connection for pipeline systems The best connection for pipeline systems The best connection for pipeline systems Since Hegawa was founded in 2004, the company has become a major supplier of pipeline connection products to the water

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers)

Spectifications. ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) Spectifications ANSI (American National Standard Institute) / ASME (American Society of Mechanical Engineers) ANSI / ASME B1.20.1 ASME B16.10 ASME B16.11 ASME B16.25 ANSI / ASME B16.28 ANSI / ASME B16.34

More information

COUPLE WITH CONFIDENCE

COUPLE WITH CONFIDENCE PIPE COUPLINGS (PTY) LTD sales@klamfle.com www.klamfle.com PRODUCT MANUAL COUPLE WITH CONFIDENCE The Largest Manufacturer of Pipe Couplings, Flange Adaptors, Stepped Couplings, Dismantling Joints and related

More information

Pressure Vessels. Featuring Ace-Threds for Threaded PTFE Plugs

Pressure Vessels. Featuring Ace-Threds for Threaded PTFE Plugs Pressure Vessels Featuring Ace-Threds for Threaded PTFE Plugs Pressure Flasks (60psig @ 120 C) Round bottom pressure flask, with either #15 or #25 PTFE plug seal top opening. The 8417 product family also

More information

Mueller Super Centurion 250 Fire Hydrant

Mueller Super Centurion 250 Fire Hydrant Mueller Super Centurion 20 Fire Hydrant Designed for efficient flow and outstanding, long-term reliability Mueller Super Centurion 20 Fire Hydrant...20 psig rating, high flow, dependable long-term performance,

More information

field cutting and welding

field cutting and welding Restrained Joint Ductile Iron Pipe and Fittings For FIRE PROTECTION, Water & Wastewater P 2 Table of Contents Field Cutting and Welding Procedure 3 Materials and Equipment 4 8 Field Cutting and Welding

More information

Uni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product

Uni-Quick Duct System. Moveable. Uni-Quick. Duct System. DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow product United McGill products Uni-Quick TM An enterprise of United McGill Corporation Family owned and operated since 1951 Moveable Duct System DUST COLLECTION and MATERIAL HANDLING APPLICATIONS a McGill AirFlow

More information

Marman Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant

Marman Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant Marman Standard Tube Size and Variable Diameter V-Band Couplings Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant V-Band Couplings Standard Tube Size and Variable Diameter

More information

DIVISION 15 CONSTRUCTION MATERIALS

DIVISION 15 CONSTRUCTION MATERIALS DIVISION 15 CONSTRUCTION MATERIALS Section 15001 Construction Materials Water Mains 15001_Jan12_2016.pdf Section 15002 Construction Materials Water Service Connections 15002_Jan12_2016.pdf Section 15003

More information

Above Ground Fittings. Below Ground Fittings. tooling

Above Ground Fittings. Below Ground Fittings. tooling C O N T E N T S Above Ground Fittings Crimp House Entry Tee 3 Crimp House Entry Tee Body 3 Building Entry Tee 3 Factory Entry Elbow 4 Meter Box Adaptors Crimp C Clip Meter Box Adaptor 4 Crimp Stab-in Meter

More information

NEWCO. Forged Steel Valves. Technical Data TC9308-4

NEWCO. Forged Steel Valves. Technical Data TC9308-4 NEWCO Forged Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures

More information

Copper Meter Resetters

Copper Meter Resetters Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

Water Lines. Materials

Water Lines. Materials Water Lines Materials Cast iron The Evansville Water distribution system includes almost 1,000 miles of water lines. Approximately 58%, or 580 miles, of the water mains in Evansville are made of cast iron

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

Rotary drilling hoses & swivels

Rotary drilling hoses & swivels Rotary drilling hoses & swivels GS-FLANGE SYSTEM Gates Black Gold Rotary Vibrator/Drilling Hose...418 Gates Black Gold Cementing Hose (2 ) 5k & 10k...419 Gates Black Gold Cementing Hose (2 1/2 4 ) 5k &

More information

18 AWG thru 8 AWG Not greater than 100/30 100/30. 6 AWG thru 1/0 AWG Not greater than 200/60 100/30

18 AWG thru 8 AWG Not greater than 100/30 100/30. 6 AWG thru 1/0 AWG Not greater than 200/60 100/30 Commercial Products COMMERCIAL PRODUCTS: RIGID AND IMC FITTINGS s Used to support cables in vertical raceways or risers. Relieves the strain that would be placed on terminations, the interior of panels,

More information

EXHIBIT "A. Technical Specifications for Water and Sewer Service Lines

EXHIBIT A. Technical Specifications for Water and Sewer Service Lines EXHIBIT "A Technical Specifications for Water and Sewer Service Lines Water and Sewer Line Bedding and Backfill: Drawings show cross-section of trench, pipe laid on top of 6" min. bedding material, bedding

More information

Manufacturing Company

Manufacturing Company Manufacturing Company McDONOUGH, GEORGIA Water Well Supplies December 2013 Made in the U.S.A. Contents Page Warranty (Back Cover)... 48 Product Certification (Back Cover)... 48 Air Valves... 38 Air Volume

More information

Appendix A: Acceptable pipe and fitting materials

Appendix A: Acceptable pipe and fitting materials Watercare Services Limited Water and Code of Practice Content from the NZS 4404:2010 Land development and subdivision infrastructure has been reproduced for use in the Infrastructure Design s Manual for

More information

All Copper Alloy Ground Connectors

All Copper Alloy Ground Connectors MA6 Type ABG For cable connection parallel or at right angles to pipe or rod. Conduit MA6 Conduit Features: A high strength corrosion-resistant copper alloy ground connector connecting a ground wire either

More information

PVC White Schedule 40 Fittings, Unions & Saddles. PRICE SCHEDULE Effective September 26, 2010 Supersedes:

PVC White Schedule 40 Fittings, Unions & Saddles. PRICE SCHEDULE Effective September 26, 2010 Supersedes: Item prices may have changed from those shown in this sheet. See Spears On-line Catalog for most current pricing, updated daily. ount s 015 Pool Spa Specialty Fittings 017 Flange Gasket/Bolt Kits 020 Irrigation

More information

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED

INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING

More information

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS

SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials

More information

Chapter 6 Material Specifications

Chapter 6 Material Specifications Chapter 6 Material Specifications Chapter 6 Material Specifications Materials incorporated in the finished work and used during construction shall be according to the standards and specifications specified

More information

Special Specification 7021 Water Main and Sewer Line Replacements

Special Specification 7021 Water Main and Sewer Line Replacements Special Specification 7021 Water Main and Sewer Line Replacements 1. DESCRIPTION Furnish, install, or replace water pipe, water valves, water meters and boxes, water service connections, fire hydrant assemblies,

More information

A New Improved Range of Push-fit Fittings for Cold Water Services

A New Improved Range of Push-fit Fittings for Cold Water Services A New Improved Range of Push-fit Fittings for Cold Water Services A new improved range of Push-fit Fittings for Cold Water Services, with Stainless Steel Teeth to grip the pipe Push-fit Fittings for Cold

More information

Recommended Fuel Piping Specification For UPP Piping, UL-971

Recommended Fuel Piping Specification For UPP Piping, UL-971 Recommended Fuel Piping Specification For UPP Piping, UL-971 1.0 General The primary delivery piping system shall be for suction or pressure applications and have semi-rigid coaxial type double wall construction,

More information

-GAL -DOM -S80SS316 -GALS80

-GAL -DOM -S80SS316 -GALS80 General Information Steel Pipe Fittings & Nipples For desired part number, use the 5-digit Class 150 or Schedule 40 part number and the corresponding suffix. i.e. 1/4 Galvanized 90 Elbow would be 42102-GAL.

More information

GEET Fuel Processor Plans

GEET Fuel Processor Plans GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very

More information

Gas Risers and Transition Fittings

Gas Risers and Transition Fittings 0 Elster Perfection Elster Perfection service line risers and transition fittings In 97, we developed the natural gas industry s first combination plastic/ steel anodeless service line riser. The first

More information

PE100 pressure fittings

PE100 pressure fittings Table of contents Table of contents...1 pressure fittings Short fittings for butt-welding Stub flanges...2 Tees...8 Bends...15 Reducers...17 End caps...26 Unions...28 Adaptors...34 Long fittings Stub flanges...36

More information

KF Needle & Gauge Valves

KF Needle & Gauge Valves KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low

More information

Pipe and Fittings Guarantee

Pipe and Fittings Guarantee Pipe and Fittings Guarantee 800kPa FAT STRIPE pipe and fittings purchased from PPI Corporation Pty Ltd and operated and installed within industry standard practice are warranted against leaks for 25 years.

More information