SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED"

Transcription

1 SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED

2 Domestic and Non-Domestic Meter Regulators G940/G941 - Domestic Meter Regulator Domestic regulator offering high performance in a compact unit. Sizes: ¾" & 1" - BS21 Pi max 350 mbar - G940 Capacity: 6 m 3 /hr Pi max 250 mbar - G941 Style: Angled Po up to 40 mbar Options: Automatic Low Pressure Cut Off (G941) Paint finish Standards: Approved to EN88 Meets British Gas Industry requirements Ask for data sheet G940/941 G1000M - Non - Domestic Meter Regulators High performance commercial and industrial meter regulators, designed for diaphragm and RPD meters. Sizes: Screwed Pi max 350 mbar 1¼", 1½", & 2" Po up to 80 mbar Inlet - BS21 Outlet - Brass meter union threads to BS 746 Flanged DN80 Type - PN16 Others on request Style: Angled Options: Pressure test point External impulse Paint finish Standards: Approved to EN88 Meets British Gas Industry requirements Ask for data sheet G1000m Industrial Regulators G1000C Compact & G Industrial Regulators High performance commercial and industrial regulators, suitable for all low pressure regulating and metering applications. Sizes: G1000C - Compact Pi max 350 mbar ½", ¾" & 1" - BS21 Inlet & Outlet Po max up to 80 mbar G1000 1", 1¼", 1½" & 2" - BS21 Inlet & Outlet Flanged DN80 & DN100 Type - PN16 Others on request Options: Pressure test point External impulse Paint finish Standards: Approved to EN88 and AGA Meets British Gas Industry requirements Ask for data sheet G1000C or G1000 Medium Pressure Regulators G Medium Pressure Regulator Medium pressure regulator suitable for 2nd & 3rd family gases Sizes: Screwed ¾" & 1" Pi max 8 bar Flanged DN25 Po up to 100 mbar Options: OPSO: Over Pressure Slam Shut Relief Valve: Full or Limited UPSO: Under Pressure Shut Off Pressure test point orientation with variable vent position Standards: British Gas Industry requirements Ask for data sheet G5000

3 Process Control G Zero Regulator & G1200 Proportionator Mechanical Valves for Air/Gas Ratio Control on Industrial Gas Equipment Sizes: ¾", 1", 1¼", 1½", & 2" Pi max 350 bar Ask for data sheet G1100 or G1200 Safety Valves R Relief Valve Valves for full over pressure protection and creep relief Sizes: ¾", 1", 1¼", 1½", & 2" - BS21 Pi max 350 bar Relief Pressure set to customer requirements Ask for data sheet R1000 L Low Pressure Cut Off Valves for under pressure protection with manual reset Sizes: Screwed ¾", 1", 1¼", 1½", & 2" - BS21 Pi max 350 bar Flanged DN80 Cut Off Pressure set to customer requirements Ask for data sheet L1000 Packaged Regulating Units Pits Below ground regulating units, single stage for medium pressure Options: Single or Twin Stream G5000 Regulator with OPSO Regulators & Limited Relief PE Inlet/Outlet Fittings Pi max 4 bar By-pass provision Po up to 100 mbar Complete Installation including Ball Valves, Filters & Cover Ask for data sheet Pits Kiosks Above ground regulating units with concrete locking base, single stage for medium pressure Options: Single or Twin Stream G5000 Regulator with OPSO Regulators & Limited Relief PE Inlet/Outlet Fittings Pi max 4 bar By-pass provision Po up to 100 mbar Complete Installation including Ball Valves, Filters & Housing Ask for data sheet Kiosks

4 Metering Accessories Brass Meter Unions Full range of meter union connectors including slotted and lugged types, the range includes the following, however, all sizes and configurations are available. 5709MS ¾" Male BS21 x 1" Female Meter Connection to BS MS 22mm Male Capillary Connection x 1" Female Meter Connection to BS746 Cap nuts available in a wide range of sizes and thread patterns, washers to suit also available. Firesafe Meter Control and Isolation Valves Firesafe Ball Valves & Taper Plug Cocks for medium and low pressure gas installations manufactured to BS1552 Firesafe Meter Control Ball Valves Maintenance Free Valves Straight Version Sizes: ¾" Female Inlet x ¾" Male Outlet 1" Female Inlet x ¾" Male Outlet 1" Female Inlet x 1" Male Outlet Angled Version Sizes: ¾" Female Inlet x ¾" Male Outlet ¾" Female Inlet x 1" Male Outlet Options: Male connection BS746 or 60 Cone Female BS21 Maximum Pressure 5 bar Low Pressure Firesafe Taper Plug Cocks Long life, low maintenance valves Sizes: 1½" & 2" Maximum Pressure 350 mbar Installation Kits Sperryn offer domestic, commercial & industrial meter installation kits to cover the full range of diaphragm and selected RPD meters, all are boxed or bagged with all components required to offer trouble free installation. Domestic Kits Stage 1 Stage 2 Typically includes Transition Fitting, Meter Control Valve, Blanking Caps and Washers. Typically includes Meter Union Flex, Regulator, Inlet/Outlet Union and Washers. Commercial & Industrial Kits Typically these Meter kits include all the components required to make the installation, packed in one box, including regulator, flex, nuts, bolts and gaskets/seals.

5 Total Quality - Total Confidence - Total Solutions Over 100 years experience Sperryn Gas Controls, part of Delta Fluid Products Ltd, has been at the forefront of the international gas industry since Development programme The Sperryn product range is extensive and with our commitment to research and development in line with market needs the range is destined to grow further in the near future. A continuous programme of new and existing product development using the latest design and manufacturing technology is a prerequisite for any company who wishes to lead the way in the gas industry. Sperryn s commitment to this process can be seen in all products, for example, by using the latest design facilities and technologies, Sperryn Gas Regulators have increased capacity, accuracy and lower pressure drops. Production engineering expertise Sperryn is proud of its production engineering capability, developed and focused on the specific requirements of the gas industry. This expertise allows greater flexibility in terms of production volume whether it is one piece or 50,000 pieces to match customer needs. From Sperryn s own brass stamping, machining and assembly facilities all elements of the manufacturing process are controlled in house. This helps to control costs, improve service levels and maintains a strong competitive advantage. Quality to depend on As a leading manufacturer of high performance components for the gas industry, Sperryn naturally is committed to quality. Our quality system is independently certified to ISO 9001 accreditation. However, we realise that the search for quality means more than just a certificate. Every member of our team has total commitment to quality, backed up with an active staff-training programme certified to Investors in People accreditation. Every aspect of the companies operations from raw materials purchased to final product despatch is carefully monitored to ensure that consistency and efficiency is top of everyone s priority list. Extensive range As well as manufacturing an extensive range of gas control valves, Sperryn also supplies component kits for meter installation, working alongside many meter manufacturers to achieve the best metering solutions. We also offer a wide variety of other component packages, including Regulating Sets and Pressure Reduction Modules, each designed with safety, capacity and cost effectiveness in mind. Service The Sperryn world market is becoming increasingly demanding and whatever natural gas, coal gas or LPG/air is being used, Sperryn have a gas valve, component or solution, which the customer can depend on. To enable us to stay at the forefront in world markets every member of our highly trained and motivated staff are determined to supply a world class customer focused service. Wherever our customers are in the world, our expertise is available to offer support and advice. Wherever you are in the world, we all share a common language - Gas.

6 SPERRYN GAS CONTROLS Delta Fluid Products Ltd Delta Road, St. Helens WA9 2ED Telephone: +44 (0) Fax: +44 (0) Distributed by: INVESTOR IN PEOPLE An approved supplier to BS EN ISO 9001 Registered No. Q5975 Whereas Delta Fluid Products Limited has, at the time of publishing, made all reasonable efforts to ensure the accuracy of the information detailed in this publication; Delta Fluid Products Limited can in no way warrant the information herein contained. For confirmation and written quotations, please contact Delta Fluid Products Limited. Copyright Delta Fluid Products Limited. Reproduction or electronic storage of any of the material contained in this publication cannot take place without the prior consent and approval of Delta Fluid Products Limited.

Copper Meter Resetters

Copper Meter Resetters Copper Meter Resetters To Set 5/8", 5/8" x 3/4", 3/4", 1", 1 1 2" & 2" Water Meters 11/12 Table of Contents Page Page Meter Resetters 5/8", 5/8" x 3/4", 3/4", & 1" Horizontal Inlet and Outlet Series 710

More information

Gas Pressure Regulator Series BD 260

Gas Pressure Regulator Series BD 260 Gas Regulator Series BD 260 For Commercial and Industrial Facilities. The BD 260 gas pressure regulator is ideal for deployment at offtake stations in gas systems as well as commercial and industrial facilities.

More information

MODEL 201 225LP 225LP2 225LP4 Safety Relief Valves

MODEL 201 225LP 225LP2 225LP4 Safety Relief Valves Edition GDRV.06 BRYAN DONKIN RMG CANADA LIMITED Serving the Gas Industry WORLDWIDE Applications Specifically designed to protect the downstream system or equipment from over pressure conditions by discharging

More information

VS-GCR Manual Reset Normally Closed Gas Valves

VS-GCR Manual Reset Normally Closed Gas Valves Page 1 of 6 VS-GCR Manual Reset Normally Closed Gas Valves Features: EN 161 Class A, Group European approval 230Vac or 24Vac solenoid coil options Flanged and screwed types Optional Closed Position Indicator

More information

SIT SIGMA

SIT SIGMA SIT 4-43- SIGMA M U LT I F U N C T I O N A L C O N T R O L F O R G A S B U R N I N G A P P L I A N C E 9.955.42 1 Subject to change without notice Application Domestic gas appliances: central heating boilers,

More information

SLAM-SHUT VALVE. Type OSE. Europe, Middle East, Africa and Asia Pacific Documents Only. Process Management TM

SLAM-SHUT VALVE. Type OSE. Europe, Middle East, Africa and Asia Pacific Documents Only. Process Management TM SLAM-SHUT VALVE Type OSE Process Management TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting.

More information

MODEL 240 GAS PRESSURE REGULATOR

MODEL 240 GAS PRESSURE REGULATOR Edition GD240.06.USA BRYAN DONKIN RMG USA Serving the Gas Industry WORLDWIDE Applications Primarily utilized for residential, commercial and industrial applications For natural gas and all non-corrosive

More information

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification... OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3

More information

Gas Pressure Regulator Series BD 273

Gas Pressure Regulator Series BD 273 Gas Pressure Regulator Series BD 27 For Special and Indoor Applications. The BD 27 gas pressure regulator is a product series for gas transmission and distribution in offtake stations in commercial and

More information

Governor Gas Regulator

Governor Gas Regulator Governor Gas Regulator ANSI Z21.80a CSA 6.22a-2005 Inlet Pressures 25" W.C. to 5 PSIG Pressures To 2 PSIG Governor Introduction Pietro Fiorentini s Governor line of gas regulators are designed to comply

More information

HIGH PERFORMANCE BALL VALVES

HIGH PERFORMANCE BALL VALVES 2373_Oliver Valves_Inners 12/5/4 1:21 PM Page 16 HIGH PERFORMANCE BALL VALVES f e a t u r e s Instrument ball valves to 15,000 PSI (trunion mount). Instrument manifolds to 3,000 PSI. Actuated ball valves.

More information

Hose and Tube Fittings Series 1-3

Hose and Tube Fittings Series 1-3 Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose

More information

Digital flow ELEMENT transmitter for continuous flow measurement

Digital flow ELEMENT transmitter for continuous flow measurement Digital flow ELEMENT transmitter for continuous flow measurement Type 8036 can be combined with... DN06 to DN65 fluidic process connection Programmable outputs : one or two transistor output(s) and single

More information

GENERAL & HIGH PRESSURE CHECK VALVES. VC Series. Kor-Lok USA

GENERAL & HIGH PRESSURE CHECK VALVES. VC Series.  Kor-Lok USA GENERAL & HIGH PRESSURE CHECK VALVES VC Series www.korlokusa.com Kor-Lok USA Features Valve Series Cracking Maximum Working VC3 General Purpose Fixed 3000 psig 207 bar VC6 High Fixed 6000 psig 413 bar

More information

Pressure relief with Broady Flow Control

Pressure relief with Broady Flow Control Safety Relief Valves 3 Pressure relief with Broady Flow Control Series 6 Safety Relief Valves Broady Flow Control The Company Broady Flow Control is an Independent Valve Manufacturer, specialising in Innovative

More information

Accessories for Differential Pressure and Flow Regulators

Accessories for Differential Pressure and Flow Regulators Self-operated Regulators Accessories for Differential Pressure and Flow Regulators Compression fittings Needle valves Condensation chamber Orifice plates Welding neck flanges Control lines Application

More information

The Axial Flow Valve. Class 300/600. sales@elster-instromet.co.uk www.elster-instromet.com SERIES

The Axial Flow Valve. Class 300/600. sales@elster-instromet.co.uk www.elster-instromet.com SERIES The Axial Flow Valve SERIES Class 300/600 sales@elster-instromet.co.uk www.elster-instromet.com THE AXIAL FLOW VALVE - SERIES 300/600 A UNIQUE REGULATOR What is the Axial Flow Valve? The Axial Flow Valve

More information

Automatic Minimum Flow System SMA 63 and SMA 64

Automatic Minimum Flow System SMA 63 and SMA 64 Figure 1 Automatic Minimum Flow System SMA 63 Advantage and Utility assurance of the required pump minimum continuous safe flow no inadmissible temperature increase in the pump; avoidance of cavitations

More information

Digital flow ELEMENT transmitter for continuous flow measurement

Digital flow ELEMENT transmitter for continuous flow measurement Digital flow ELEMENT transmitter for continuous flow measurement Type 8026 can be combined with... PN10, DN15 to DN400 fluidic process connection Programmable outputs : one or two transistor output(s)

More information

PROFLEX Control Valves

PROFLEX Control Valves PROFLEX Control Valves Globe Control Valves 3-way Control Valves Pneumatic Diaphragm Actuators, Type T Pneumatic Diaphragm Actuators, Type S Pneumatic Screw-in Temperature Controllers Operating Instruction

More information

Pro Taps, Pro Brassfoundry & Pro Valves

Pro Taps, Pro Brassfoundry & Pro Valves Pro Taps, Pro Brassfoundry & Pro Valves 7: 07/117 Pro Taps Classic Range Classic Range 702598 702599 702604 702603 755104 702598 Basin Pillar Taps Pair 17.22 702599 Bath Pillar Taps Pair 18.26 755104 Mono

More information

Check Valves & Actuated Valves

Check Valves & Actuated Valves heck Valves & ctuated Valves & U Series Piston non-return valves rated 6,000 psi & 10,000 psi X Series Piston non-return valves rated 20,000 psi Pneumatic ctuators Pneumatically actuated valves Electric

More information

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).

Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant). Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)

More information

PRESSURE REDUCING VALVES

PRESSURE REDUCING VALVES 0E0-GB PRESSURE REDUCING VAVES MAIN FEATURES The pressure reducing valve is able, by varying its pressure drops, to hold the downstream pressure of the fluid at a constant level against changes in the

More information

HUPF Series DESCRIPTION APPLICATION SPECIFICATION SHEET GAS PRESSURE REGULATOR WITH INCORPORATED FILTER

HUPF Series DESCRIPTION APPLICATION SPECIFICATION SHEET GAS PRESSURE REGULATOR WITH INCORPORATED FILTER HUPF Series GAS PRESSURE REGULATOR WITH INCORPORATED FILTER SPECIFICATION SHEET DESCRIPTION Spring-loaded regulator (also called governor) with inlet pressure compensation and zero shut-off. The outlet

More information

VMR. Safety solenoid valves for air and gas Fast opening and fast closing type DN10 DN150.

VMR. Safety solenoid valves for air and gas Fast opening and fast closing type DN10 DN150. VMR Safety solenoid valves for air and gas Fast opening and fast closing type DN0 DN50 www.pandid.nl VMR6 - VMR9 Certified Quality System Printed in Italy - EE6/0705 VMR Fast safety solenoid valves Class

More information

for domestic 2-pipe systems RAS-C 2 range

for domestic 2-pipe systems RAS-C 2 range Radiator thermostats for domestic 2-pipe systems range EN 215 Series GB Application radiator thermostats are designed for use in 2-pipe domestic heating systems. All Combi s comprises a RA-FS angled or

More information

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves BS EN ISO 9001 0086 as FM 00707 Worcester Controls Cryogenic 3-Piece Ball Valves Cryogenic Valve Design Worcester's experience and expertise in the design of cryogenic ball valves has been recognised throughout

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

Auto Reset Gas Solenoid Valves GV-VMR

Auto Reset Gas Solenoid Valves GV-VMR Page 1 of 5 Description The VMR type valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas

More information

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series

HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series HIGH PRESSURE FORGED MULTI PURPOSE BALL VALVES VB6F Series www.korlokusa.com Kor-Lok USA Features Pressure rating up to 6000psig (413bar) @21 (70 ) with standard PCTFE seats Temperature rating from -54

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE MANUAL NUTRON BALL VALVE MODEL B3 1 ½ FP 6 RP 150# - 2500# For technical questions, please contact the following: Engineering Department 2125-64 Avenue Edmonton, Alberta, Canada

More information

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700 SAPAG Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Features Thermal expansion, to API 520 Certified to ASME VIII for air and steam Gas, Steam and Liquid service Integral nozzle -

More information

Flow controller with integrated control valve (PN 25) AVQM - return and flow mounting

Flow controller with integrated control valve (PN 25) AVQM - return and flow mounting Data sheet Flow controller with integrated control valve (PN 25) AVQM - return and flow mounting Description Controllers are used together with Danfoss electrical actuators: - AMV 150 1) - AMV(E) 10 1)

More information

Pressure Control for CO 2

Pressure Control for CO 2 Control for CO 2 A range of pressure control valves are available for gaseous CO 2 use in high flow applications. The CO 2 source can be a bulk liquid CO 2 storage tank, a high pressure tank or manifold

More information

800-348-8467 www.fittingsunlimited.com

800-348-8467 www.fittingsunlimited.com Thread and Port Identification Guide 800-348-8467 www.fittingsunlimited.com INDEX Index... 1 Explanation of Symbols... 2 How to Measure Threads... 3-4 Metric vs English Threads... 5 North American Connections

More information

Gas Appliance Pressure Regulators with integrated gas filter. FRI/6 Series

Gas Appliance Pressure Regulators with integrated gas filter. FRI/6 Series Gas Appliance Pressure Regulators with integrated gas filter FRI/6 Series CSA Certified ANSI Z21.18 / CSA 6.3 Gas Appliance Pressure Regulator File # 1135455 EU Gas Appliance Directive EN 88-1 CE-0087

More information

T&S Ball Valves. High Technology Valve & Fitting Series.

T&S Ball Valves. High Technology Valve & Fitting Series. T&S Ball Valves High Technology Valve & Fitting Series www.superlok.com 120 SERIES ONE PIECE TYPE SBV 120H Series Features Simple design with one piece body Tight and smooth, low torque and easy operation

More information

Flow-compensated temperature controller AVTQ DN 15

Flow-compensated temperature controller AVTQ DN 15 Data sheet Flow-compensated temperature controller AVTQ DN 15 Description AVTQ prevents high temperatures in the heat exchanger when no hot water is tapped by rapidly shutting off the heat supply (e.g.

More information

stainless steel pre-assembled manifolds

stainless steel pre-assembled manifolds TECHNICAL CATALOGUE stainless steel pre-assembled manifolds TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and

More information

Service Governor Modules

Service Governor Modules Service Governor Modules Product information serving the gas industry worldwide Introduction Bryan Donkin RMG, have successfully engineered Gas Pressure Reducing and Metering Stations for over 4 years

More information

VMM. Multiple safety solenoid valve for gas regulating trains DN32 DN50. VMM402AS30

VMM. Multiple safety solenoid valve for gas regulating trains DN32 DN50.  VMM402AS30 VMM Multiple safety solenoid valve for gas regulating trains DN DN www.elektrogas.com VMMAS0 Certified Quality System Printed in Italy - EE1/05 VMM Multiple safety solenoid valve for gas regulating trains

More information

IEC Connectors. Introduction

IEC Connectors. Introduction Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings

More information

OPERATION AND MAINTENANCE MANUAL

OPERATION AND MAINTENANCE MANUAL OPERATION AND MAINTENANCE MANUAL NUTRON BALL VALVE Model T3 ½ FP 4 RP 150# - 2500# ¼ FP 4 RP 1000 WOG 6000 WOG FLANGED, FNPT and WELD END For technical questions, please contact the following: Engineering

More information

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems.

U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. Section 12 U.L. Listed Beverage Regulators Cylinder Gas Pressure (CO 2 ) Regulators for Soft Drink and Beer dispensing systems. R84 Regulator and C84 Regulator Configurations for Soft Drink Carbonator

More information

Integral Block & Bleed Valves. High Technology Valve & Fitting Series

Integral Block & Bleed Valves. High Technology Valve & Fitting Series Integral Block & Bleed Valves High Technology Valve & Fitting Series SUPERLOK instrumentation products has the ultimate solutions for a compact range of one-piece forged body integral block & bleed valves,

More information

B34 Series Regulator Commercial and Industrial Regulator

B34 Series Regulator Commercial and Industrial Regulator Gas B34 Series Regulator Commercial and Industrial Regulator Applications Appropriate for many commercial and industrial uses such as gas engines, burners, furnaces and boilers. The rapid response of the

More information

8D.1 BALL ANGLE METER VALVES - 3/4" & 1" P-24258 B-24258 E-24259 B-24259 B-24266 B-24267

8D.1 BALL ANGLE METER VALVES - 3/4 & 1 P-24258 B-24258 E-24259 B-24259 B-24266 B-24267 BALL ANGLE METER VALVES - 3/4" & " 8D. B-24258 MUELLER 300 Ball Angle Meter Valve MUELLER 0 Conductive Compression Connection for CTS O.D.* tubing x meter swivel nut** adding -3 suffix to catalog number.

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

TY-FLO Needle Valves

TY-FLO Needle Valves Design/Features Hard (Vee) or Delrin Soft Seat/Tip Orifice sizes from.17 to.438 in. Flow Coefficients (C V ) from.37 to.7 Straight or angle flow patterns Optional panel mount Handle options available Non-wetted

More information

Industrial Regulator Series 1800/2000

Industrial Regulator Series 1800/2000 E S 85. Industrial Regulator Series / M Quality System QMI is ccredited by: R E I T ISO 9 Registered R E NSI R G I S T R R utch ouncil for ccreditation Measurement Engineers Since 86 merican Meter Series

More information

REGAL GAS CHLORINATOR

REGAL GAS CHLORINATOR SPECIFICATION 210/216 REGAL GAS The REGAL Model 210 Chlorinator is a vacuum-operated, solution feed type, designed for mounting directly on a chlorine cylinder valve by means of a positive heavy duty yoke

More information

Solenoid valves for gas VAS Double solenoid valves VCS

Solenoid valves for gas VAS Double solenoid valves VCS Solenoid valves for gas VAS Double solenoid valves VCS roduct brochure GB Edition 0. Safety shut-off valves for gas Suitable for a max. inlet pressure of 500 mbar (7 psig) Easy installation into a system

More information

BRASS FITTINGS FOR THREADED PIPES

BRASS FITTINGS FOR THREADED PIPES 03/14 BRASS FITTINGS GENERAL FEATURES The brass fittings for threaded pipes are used as junctions for pipelines with threaded connection UNI ISO 228/1. The thread dimensions are subdivided in various types

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

Type 3353 Angle Seat Valve

Type 3353 Angle Seat Valve Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat

More information

The new VKD Ball Valve with Dual Block Technology. Dares to be different

The new VKD Ball Valve with Dual Block Technology. Dares to be different The new VKD Ball Valve with Dual Block Technology Dares to be different VKDUALBLOCK Durapipe are pleased to introduce the new VK Dual Block ball valve developed by FIP providing an advanced standard in

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting

Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow

More information

Model E / E3 DN100 (4"), DN150 (6"), DN200 (8") Wet Alarm Valve with E2 Euro Stainless Steel Trim

Model E / E3 DN100 (4), DN150 (6), DN200 (8) Wet Alarm Valve with E2 Euro Stainless Steel Trim Information on Set-up, operation, service and maintenance Model E / E3 DN100 (4"), DN150 (6"), DN200 (8") Wet Alarm Valve with E2 Euro Stainless Steel Trim Model E/E3 with Stainless Steel Euro Trim Approval

More information

VOYAGER 570G. 744A Sprayer Control

VOYAGER 570G. 744A Sprayer Control VOYAGER 570G 744A Sprayer Control U S E R M A N U A L U S E R M A N U A L Table of Contents CHAPTER 1 - INTRODUCTION...1 SYSTEM CONFIGURATIONS...1 KIT CONTENTS...3 CONTROL HOUSING ASSEMBLY...5 CHAPTER

More information

Pressure Tank Gauge Module

Pressure Tank Gauge Module Pressure Tank Gauge Module Introduction The E-Plex 318PFTG series can be used in a wide variety of applications. The same tank sender can be used for diesel fuel, fresh water, grey water, or black water

More information

SAFETY VALVES SERIES 3030 EC Marking in conformity with 97/23/EC Directive (PED)

SAFETY VALVES SERIES 3030 EC Marking in conformity with 97/23/EC Directive (PED) SAFETY VALVES SERIES 3030 EC Marking in conformity with 97/23/EC Directive (PED) GENERAL DESCRIPTION Valves series 3030 are safety devices according to the definition given in Article 1, Point 2.1.3, 2

More information

Raycon Industries 620 North Berry St., Brea, California 92821 U.S.A. Telephone 714.257.9192 Fax 714.257.9193

Raycon Industries 620 North Berry St., Brea, California 92821 U.S.A. Telephone 714.257.9192 Fax 714.257.9193 Raycon Industries 620 North Berry St., Brea, California 92821 U.S.A. Telephone 714.257.9192 Fax 714.257.9193 email: info@rayconindustries.com Website: www.rayconindustries.com Designed in compliance of

More information

VMM ELEKTROGAS MULTIPLE SAFETY SOLENOID VALVE FOR REGULATING TRAINS

VMM ELEKTROGAS MULTIPLE SAFETY SOLENOID VALVE FOR REGULATING TRAINS VMM MULTIPLE SAFETY SOLENOID VALVE FOR REGULATING TRAINS E050 VMM MULTIPLE SAFETY SOLENOID VALVE CLASS A - GROUP 2 The VMM type valve is a combination of two valves in an only compact and versatile valve

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

JACKET/FRAME ASSEMBLY See page 4

JACKET/FRAME ASSEMBLY See page 4 PSD-3-148 WIRING/HARNESS & PROBES See page 8 PROPANE GAS TRAIN ASSEMBLY See page 6 COMMERCIAL POWER BURNER BOILER REPLACEMENT PARTS LIST COPPER BOILERS FOR HYDRONIC HEATING & HOT WATER SUPPLY LEGEND MODELS

More information

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:

Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below: Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees

More information

RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description

RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description Worldwide Contacts www.tyco-fire.com RAPID RESPONSE Model RSV-1 Residential Shut-Off Valve, 1 Inch and 2 Inch (DN25 and DN50) for Dual-Purpose Residential Water Supply General Description The TYCO RAPID

More information

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES

GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES GAS DISTRIBUTION PRODUCTS STEEL SERVICE TEES CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today

More information

TECHNICAL CATALOGUE ZONE BALL VALVES WITH BIDIRECTIONAL ACTUATORS

TECHNICAL CATALOGUE ZONE BALL VALVES WITH BIDIRECTIONAL ACTUATORS TECHNICAL CATALOGUE ZONE BALL VALVES WITH BIDIRECTIONAL ACTUATORS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings

More information

Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)

Thermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special

More information

Rosemount 1495 Orifice Plate, 1496 Orifice Flange Union

Rosemount 1495 Orifice Plate, 1496 Orifice Flange Union Reference Manual Rosemount 1495 Orifice Plate, 1496 Orifice Flange Union Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union www.rosemount.com Reference Manual Rosemount 1495, 1496 Rosemount

More information

MFP14, MFP14S and MFP14SS Automatic Pumps

MFP14, MFP14S and MFP14SS Automatic Pumps Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It

More information

SUPRApak Multi-Stack Series Filter Housings SUPRApak Filtration For High Volume Depth Filtration

SUPRApak Multi-Stack Series Filter Housings SUPRApak Filtration For High Volume Depth Filtration SUPRApak Multi-Stack Series Filter Housings SUPRApak Filtration For High Volume Depth Filtration FBSPAKMSWAEN Technical Information SUPRApak Multi-Stack Series-WA housings are designed for use with SUPRApak

More information

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide

A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide A Bray High Performance Company A Subsidiary of BRAY INTERNATIONAL, Inc. Ball Valve Selection Guide 3 Piece Valves Triad Series Models FP/SP-2000/3000 / Valve Sizes: Model FP: 1/4 through 4 Model SP: 3/4

More information

Double solenoid valve Combined pressure regulator and safety valves Gas-air-ratio-control MBC-...-VEF DN 65 - DN 100

Double solenoid valve Combined pressure regulator and safety valves Gas-air-ratio-control MBC-...-VEF DN 65 - DN 100 Double solenoid valve Combined pressure regulator and safety valves Gas-air-ratio-control DN 5 - DN 00 7. Printed in Germany Edition 05.5 Nr. 0 Technical Description The DUNGS multiple actuator integrates

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

Reval 182 Pressure Regulators

Reval 182 Pressure Regulators Reval 182 ressure Regulators ressure regulators Reval 182 Reval 182 is pilot-controlled pressure regulator for medium and low pressure applications. Reval 182 is normally a fail to close regulator and

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves

ball valves Flomite 71 Series 2-way Integral Panel Mount Ball Valves 2-way Integral Panel Mount Ball Valves Used for quick on-off service with a visual indication of flow, HOKE s 2-way ball valves offer orifice sizes up to 0.25 (6.4mm). Flomite valves feature a floating

More information

Air Fuse In-Line Excess Flow Shut off Valve

Air Fuse In-Line Excess Flow Shut off Valve In-Line Excess Flow Shut off Valve 1 4" to 1 1 2" BSPP, NPT Assists in complying with safety regulations Tamper proof Compact and safe design Low pressure drop Automatically resets after failure correction

More information

Battery Powered Digital Mass Flow Meters for Gases

Battery Powered Digital Mass Flow Meters for Gases Next Generation red-y compact: AA Battery Powered Touch Technology Micro-UB Port red-y compact series product information Battery Powered Digital Mass Flow Meters for Gases Independent digital convenience:

More information

BGC278 Series BASOTROL CE Approved Gas Valve

BGC278 Series BASOTROL CE Approved Gas Valve Installation Instructions BGC278 Issue Date April 1, 2013 BGC278 Series BASOTROL CE Approved Gas Valve Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing

More information

Process Inline Filter PLF1

Process Inline Filter PLF1 Process Inline Filter PLF1 10 bar 16 bar Specifications Nominal size: DN 50 DN 150 Q s max: 200 m 3 /h p s max: 16 bar Filtration ratings: 1 90 µm 1. GENERAL Product description Continuous separation of

More information

Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP. Feed Water Connector 1. 1/2" FIP x 1/2" MIP x 1/4" OD 2. 3.

Double-Headed Screw 1. 3/4 FIP x 3/4 MIP x 1/4 hole 2. 3/4 Fip x 3/4 MIP. Feed Water Connector 1. 1/2 FIP x 1/2 MIP x 1/4 OD 2. 3. Picture Item No. Description RO- 0010 Brass Water Feed 1. 3/4" FIP with 1/4" hole 2. Using on R.O. tank RO- O020 Double-Headed Screw 1. 3/4" FIP x 3/4" MIP x 1/4" hole 2. 3/4" Fip x 3/4" MIP RO- 0030 Brass

More information

Shut-off & Lockout Valves 1/4" to 1-1/2" port size

Shut-off & Lockout Valves 1/4 to 1-1/2 port size Section 16 Shut-off & Lockout Valves 1/4" to 1-1/2" port size Contents T72 Excelon Shut-off & Lockout Valves 1/4", 3/8" Port Sizes....................................ALE-16-2 T73 Excelon Shut-Off & Lockout

More information

1805 Series Relief Valves

1805 Series Relief Valves October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

Process Inline Filter PLF1

Process Inline Filter PLF1 Process Inline Filter PLF1 Specifications Nominal size: DN 50 - DN 150 Q max: 200 m 3 /h p max: 16 bar Filtration ratings: 1-90 µm 1. GENERAL Product description Continuous separation of solid particles

More information

VALVES SANS 664:1999. Technical Catalogue. Gate Valves. Fire Hydrants. Check Valves. Air Valves. For Use In. Water Supply.

VALVES SANS 664:1999. Technical Catalogue. Gate Valves. Fire Hydrants. Check Valves. Air Valves. For Use In. Water Supply. VALVES Technical Catalogue Gate Valves Fire Hydrants Check Valves Air Valves For Use In Water Supply Sewage Treatment Fire Fighting Gas Supply WORLD LEADERS IN VALVE TECHNOLOGY PROUDLY DISTRIBUTED BY DPI

More information

Assembly Guide ADJUSTABLE-BEAM PALLET RACKING

Assembly Guide ADJUSTABLE-BEAM PALLET RACKING Assembly Guide ADJUSTABLE-BEAM PALLET RACKING Standard Components and Accessories PART NUMBER: BXLAI. ISSUE 2 / MAY2010 READ THIS GUIDE THOROUGHLY BEFORE COMMENCING ASSEMBLY AND RETAIN FOR FUTURE REFERENCE

More information

Industrial Regulator Series 1800/2000 Instructions and Parts List

Industrial Regulator Series 1800/2000 Instructions and Parts List IMP 8740.3 Industrial Regulator Series 1800/2000 Instructions and Parts List AMC Quality System QMI is Accredited by: ISO 9002 Certified Dutch Council for Accreditation Instructions: Industrial Regulator

More information

ph or O.R.P. Transmitter

ph or O.R.P. Transmitter ph or O.R.P. Transmitter Type 8202 can be combined with... Programmable outputs: two transistor and single or dual analog 4-20 ma (Process + Temp) Removable backlit display Universal fluidic process connection

More information

Pressure Switch for gas and air

Pressure Switch for gas and air Switch for gas and air GAO-A4 GMH-A4 GML-A4 UL Listed UL 353 File # MH 16628 CSA Certified CSA C22.2 No. LR 53222 Certification file # 201527 FM Approved Class 3510, 3530 File # J.I. 1Y919.AF Commonwealth

More information

EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas

EWE Ball Valve-Type Tapping Valve. EWE Ball-Type Tapping Valve. EWE GBM Tapping Valves. for water and gas The following overview shows the different EWE tapping valves to help you to make your choice: EWE valve tapping valve for vertical tapping with operating shut-off, for all types of pipe, with external

More information

TECHNICAL CATALOGUE ZONE BALL VALVES WITH UNIDIRECTIONAL ACTUATORS

TECHNICAL CATALOGUE ZONE BALL VALVES WITH UNIDIRECTIONAL ACTUATORS TECHNICAL CATALOGUE ZONE BALL VALVES WITH UNIDIRECTIONAL ACTUATORS TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings

More information