High Pressure Filters. 70/70 Eco Series. MAX 450 I/min -420 bar FEATURING. High pressure filters
|
|
|
- Buck Brooks
- 7 years ago
- Views:
Transcription
1 7/7 Eco eries MAX 5 I/min - bar FEATURING 5 High pressure filters
2 7/7 Eco eries Features &enefits Features Fatigue tested to full pressure rating everal head options and connection sizes everal bowl lengths Microglass III replacement elements Coreless Ecoglass III replacement elements Visual, electrical and electronic indicators available Advantages trong and robust housing for heavy duty applications Easy mounting Optimised sizing Multi-layered design produced high capacity and efficiency Wire support reduces pleat bunching, keeps performance consistent No metal content in element Reduced overall weight of 5% Easy compaction of used elements Eco adaptors available Check element condition at aglance Right style for the application enefits Reliable and continuous operation both in mobile and industrial applications Reduced space and piping Right filter for each application Efficient filtration Great performance value Reliable performance throughout element life Reduces downtime, maimises element life Environmentally friendly disposal by incineration Lower element replacement costs Lower disposal costs Retrofit coreless design to housings already installed Optimise element life, prevent bypassing Matches your system electrical connections Typical Applications Forestry equipment Industrial power units Pulp and paper Port handling equipment Mining and quarrying equipment The Parker Filtration 7/7 Eco eries High Pressure Filters. High quality bar in-line pressure filters designed to offer high levels of protection at flows up to 5 l/min. irt sensitive systems can be protected with confidence using the 7 eries high pressure filters. The 7 eries also available with environmentally friendly Ecoglass III elements. 6 Parker Hannifin Hydraulic Filter ivision Europe FHUK. ection 5
3
4 7/7 Eco eries pecification 7 7T 7L pindicator Vent port (.5) Out In 7 (.75) 8 (.5) Out 75 (.95) 7 In A 7 Option plug G / Option plug G / Internal dia. /eternal dia. O-ring size mounting holes dia. (5.7) Outlet 95 (.7) 8 (.) 5 (.) 9 (7.8) Option Plug M.5 (.86) 58 (.8) Inlet 8 (.5) (5.6) 5 (5.) (.69) 8 (.) Optional indicator port No. AE-flange version 7 (.75) 9 () (5.) Ø (.5) 6 (.) 6 (.6) HEX 6 (.6) HEX Ma torque Nm 6 (.6) HEX (.6) mm (inches) (5.67) (.9) M depth Option plug M.5 5 (.) 55 (6.) (.69) M depth (.78) Housing for AE flange mounting doesn t have these holes Weights (kg) Type 7T 7L 7 Length.5.5 Length 6.5 Length Length (.) 7 (5.9) 89 (.5) Type A Ma working Port 7T 7 7L pressure Length Length Length Length 6 (.57) 8 (8.9) 9 (.95) 8 (6.85) 9 (9.8) (.6) 6 (8.9) 56 (.) 95 (.6) 9 (5.5) 5 (.8) 6 (.) 5 (9.5) (.) 5 (7.7) 55 (.65) bar 5 bar G, G / or G / Flange / AE -M Flange / AE -M Flange / AE 6-M Flange / AE 6-M 8 Parker Hannifin Hydraulic Filter ivision Europe FHUK. ection 5
5 Pressure rop Curves With bypass the recommended initial pressure drop is ma. bar. If the medium used has aviscosity different from ct, pressure drop over the filter can be estimated as follows: The total p=housing ph +(element pe working viscosity/). 7 eries Empty Housing A C E Δ p(pi) A: 7T with G6 connections : 7T with G connections 7L with G6 connections C: 7L with G connections 7 : 7T with G connections E: 7L with G connections Elements with Microglass III 7- Elements with Microglass III Q. 5Q Q Q Δ p(pi) Q 5Q Q Q Δ p(pi) Elements with Microglass III 7- Elements with Microglass III Q 5Q Q Q Δ p(pi) Q Q Q Q.5.6 Δ p(pi) High pressure filters
6 7/7 Eco eries Pressure rop Curves (cont.) 7- Elements with Ecoglass III 7- Elements with Ecoglass III QE. 7. QE QE QE QE 5QE QE Δ p(pi).8.6 QE.6 Δ p(pi) Elements with Ecoglass III 7- Elements with Ecoglass III QE QE QE.5.6 Δ p(pi) QE 5QE QE Δ p(pi).. QE.9.. QE Parker Hannifin Hydraulic Filter ivision Europe FHUK. ection 5
7 Ordering Information tandard products table Part number 7LQPKG6 7LQPKG6 7LQPKG 7LQPKG 7LQPKG 7LQPKG 7LQPKG 7LQPKG 7LQEPKG6 7LQEPKG6 7LQEPKG 7LQEPKG 7LQEPKG 7LQEPKG 7LQEPKG 7LQEPKG 7TQPKG6 7TQPKG6 7TQPKG 7TQPKG 7TQPKG 7TQPKG 7TQPKG 7TQPKG 7TQEPKG6 7TQEPKG6 7TQEPKG 7TQEPKG 7TQEPKG 7TQEPKG 7TQEPKG 7TQEPKG upersedes FF75.Q.5.GL6 FF75.Q.5.GL6 FF76.Q.5.GL FF76.Q.5.GL FF77.Q.5.GL FF77.Q.5.GL FF78.Q.5.GL FF78.Q.5.GL FF75.QE.5.GL6 FF75.QE.5.GL6 FF76.QE.5.GL FF76.QE.5.GL FF77.QE.5.GL FF77.QE.5.GL FF78.QE.5.GL FF78.QE.5.GL FF75.Q.5.GT6 FF75.Q.5.GT6 FF76.Q.5.GT FF76.Q.5.GT FF77.Q.5.GT FF77.Q.5.GT FF78.Q.5.GT FF78.Q.5.GT FF75.QE.5.GT6 FF75.QE.5.GT6 FF76.QE.5.GT FF76.QE.5.GT FF77.QE.5.GT FF77.QE.5.GT FF78.QE.5.GT FF78.QE.5.GT Flow (l/min) Model number 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7L 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T 7T Element length Note: Filter assemblies ordered from the product configurator on net page are on etended lead times. Where possible, please make your selection from the table above. Media rating (µ) eals Indicator ypass settings Ports G" G" G / " G / " G / " G / " G / " G / " G" G" G / " G / " G / " G / " G / " G / " G" G" G / " G / " G / " G / " G / " G / " G" G" G / " G / " G / " G / " G / " G / " Replacement elements 9877Q 9877Q 98777Q 98778Q 9878Q 9878Q 98785Q 98786Q 98789Q 9879Q 9879Q 9879Q 98797Q 98798Q 988Q 988Q 9877Q 9877Q 98777Q 98778Q 9878Q 9878Q 98785Q 98786Q 98789Q 9879Q 9879Q 9879Q 98797Q 98798Q 988Q 988Q upersedes FC75.Q.K FC75.Q.K FC76.Q.K FC76.Q.K FC77.Q.K FC77.Q.K FC78.Q.K FC78.Q.K FC75.QE.K FC75.QE.K FC76.QE.K FC76.QE.K FC77.QE.K FC77.QE.K FC78.QE.K FC78.QE.K FC75.Q.K FC75.Q.K FC76.Q.K FC76.Q.K FC77.Q.K FC77.Q.K FC78.Q.K FC78.Q.K FC75.QE.K FC75.QE.K FC76.QE.K FC76.QE.K FC77.QE.K FC77.QE.K FC78.QE.K FC78.QE.K High pressure filters
8 7/7 Eco eries Ordering Information (cont.) Product configurator o o 7L o Q o o 5 M o 6 K o 7 G o 8 o Model High pressure filter with L-port High pressure filter with T-port High pressurefilterwithside manifold mounting 7L 7T 7 o Length Length Length Length Length Filter type o Element media Microglass III element Ecoglass III element High collapse element egree of filtration Glass fibre Q QE QH 5Q 5QE 5QH Media code Q QE QH Note: When using Ecoglass III elements reusable Eco-adaptor is required Q QE QH o eal material Fluoroelastomer eal type V o 5 with steel plug Visual indicator Electrical indicator Electronic LE, PNP, N.O. Electronic LE, NPN, N.O. Electronic LE, PNP, N.C. Electronic LE, NPN, N.C. Indicator P M T F F F F o 6 ypass and indicator settings ypass valve No bypass No bypass Indicator.5 bar 7. bar No indicator (P) K N X When filter includes abypass valve but not an indicator, code denotes bypass setting. + o 8: code + o 8: code o 7 Connections Thread G Thread G / Thread G / AE flange / "-M AE flange / "-M AE flange / "6-M AE flange / "6-M ide manifold (7 only) G6 G G R R H H X Availability: =standard product =non-standard, ask for availability Filter connection Length Length Length Length o 8 Options Options tandard No bypass rain port 7T: side indicator ports 7T: options Options 6and 8: in 7T model there isan option for indicator ports on filter outlet flange (standard indicator port not machined) P: both side indicator ports plugged with steel plug M or other indicator chosen: right side (in flow direction) port plugged with aplastic plug, left with asteel plug Filter length Length Length Length Length Media Q/QE 5Q/5QE Q/QE Q/QE Q/QE 5Q/5QE Q/QE Q/QE Q/QE 5Q/5QE Q/QE Q/QE Q/QE 5Q/5QE Q/QE Q/QE Nominal flow (I/min) at viscosity ct G6 T-port G6 L-port & G T-port G L-port & ide manifold G T-port G L-port Media Q 5Q Q Q QE 5QE QE QE QH 5QH QH QH Replacement elements with nitrile seals Length 9877Q 9877Q 9877Q 9877Q 98787Q 98788Q 98789Q 9879Q 988Q 988Q 9885Q 9886Q Length 98775Q 98776Q 98777Q 98778Q 9879Q 9879Q 9879Q 9879Q 9887Q 9888Q 9889Q 988Q Item is standard Item is standard green option Item is semi standard Item is non standard Length 98779Q 9878Q 9878Q 9878Q 98795Q 98796Q 98797Q 98798Q 988Q 988Q 988Q 988Q Highlights Key (enotes part number availability) Length 9878Q 9878Q 98785Q 98786Q 98799Q 988Q 988Q 988Q 9885Q 9886Q 9887Q 9888Q Note: tandard items are in stock, semi standard items are available within four weeks ß(c)= 5.% 6 egree of filtration Average filtration betaratio ß(IO 6889) /particle size µm[c] ß(c)= ß(c)=75 ß(c)= ß(c)= ß(c)= %efficiency, based on the above beta ratio (ß) 9.% 6 9% % % %.5 7 isposable Microglass III Q 5Q Q Q Metal free Ecoglass III QE 5QE QE QE High collapse element QH 5QH QH QH Note :Part numbers featured with bold highlighted codes will ensure a standard product selection. Note : Alternate displayed part number selection will require you to contact Parker Filtration for availability. Parker Hannifin Hydraulic Filter ivision Europe FHUK. ection 5
15/40/80CN Series Medium Pressure Filters Max. 600 I/min - 70 bar
1/4/8CN Series Max. 6 I/min - 7 bar Premium performance for medium pressure applications FEATURING An economical multipurpose filter solution The CN Series utilizes a cast aluminium head and spin-on bowl
Eco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
15/40/80CN Series Medium Pressure Filters
1/4/8CN Series Medium Pressure Filters Max 32 l/min - 7 bar Global Filtration Technology 1/4/8CN Series TYPICAL APPLICATIONS Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard)
Eco130 Series. Medium Pressure Filters Max. 1400 l/min. 30 bar. Modular system for industrial applications. Applications: Contact Information:
Eco130 Series Medium Pressure Filters Max. 1400 l/min. 30 bar Modular system for industrial applications High flow return filters for industrial use on hydraulic or lubrication systems. High flow and pressure
12CS Series Coreless Spin-on Filter Max. 75 l/min - 35 bar
2CS Series Coreless Spin-on Filter Max. 7 l/min - 3 bar Environmentally friendly alternative for spin-on filtration Lightweight, non-metallic element that can be incinerated The 2CS Series features a Parker,
In-Tank Mounted Return Line Filters. IN-AGB Series. MAX 2400 I/min LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
MAX I/min AN INNOVATIVE GREEN FILTER FEATURING LEIF LEIF Low pressure filters Features & Benefits Features Filter integrated in tank LEIF elements Magnetic pre-filtration In-to-Out filtration igh level
15/40/80CN Series Coreless Medium Pressure Filters
//8CN Series Coreless Medium Pressure Filters //8CN Series Applications Compressor Lube Oil Off-line Filter Loops Machine Tools (Automotive Standard) Hydrostatic Drive Charge Pumps Mobile Equipment Pilot
BGAH Series. Medium Pressure Filters Max. 500 l/min. 25 bar. In-line solution for a straight pipeline. Applications: Contact Information:
BGAH Series Medium Pressure Filters Max. 500 l/min. 25 bar In-line solution for a straight pipeline Pre-filtration by magnet column and a full-flow bypass with low hysteresis. Contamination-proof in-out
MHT. Pressure Filters HIGH PRESSURE INLINE FILTER
MHT Pressure Filters HIGH PEUE INLINE FILTE Pressure Filters MHT MHT 4 MPa ( bar) Port sizes: / / Flow rates: 0 l/min TEHNIAL DATA Max. working pressure: 4 MPa ( bar) Max. testing pressure: 6 MPa (60 bar)
HFS and HFD Series. High Flow Single and Duplex Filters Max. 11200 l/min. 10 bar. Heavy Duty Reliability. Applications: Contact Information:
High Flow Single and Duplex Filters Max. 11200 l/min. 10 bar Heavy Duty Reliability New High Flow Single and Duplex Filters ensure reliability in industrial, marine, and power generation applications up
Coreless Spin-On Filters. 12AS/50AS Series
Coreless Spin-On Filters 12AS/5AS Series Coreless Spin-on Filters 12AS/5AS Series The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old
Tanktop Mounted Return Line Filters. BGT Series. MAX 2400 I/min - 10 bar LEIF LEIF FILTER FEATURING AN INNOVATIVE GREEN. Low pressure filters
GT Series X 2 I/min - bar N INNOVTIV GRN FITR FTURING IF IF 2 ow pressure filters GT Series Features & enefits Features bar rated filter ast aluminium head IF elements agnetic pre-filtration In-to-Out
Hydraulic Filtration & Contamination Control Products. Catalogue: FDHB200UK January 2007
Hydraulic Filtration & Contamination Control Products Catalogue: FDHB2UK January 27 Consistent quality Technical innovation Premier customer service Hydraulic, Lubrication & Coolant Filtration High-performance
Check Valves Valve locator
Check Valves Valve locator Functional Symbol Flow Typical Model Cavity Rating Pressure Page Check valve, direct L/min (USgpm) bar (psi) FPR/4 Inline () 5 (5) - FPR/8 Inline (8) 5 (5) - FPR/ Inline 45 ()
Safety for Hydraulics Leak free double check valve, pilot operated, series DERV Cartridge type, two stage
Safety for Hydraulics Leak free double check valve, pilot operated, series Cartridge type, two stage 8 1 1 General description spring closed, pilot operated, cartridge type poppet valve it holds the load
SERIES FRI. Maximum working pressure 20 bar Flow rate to 1200 l/min. s.p.a
SRIS FRI Maximum working pressure bar Flow rate to 1 l/min s.p.a R FRI series filter has been disigned and developed to satisfy the demands pf applications, on return or low preessure line in Hydraulic
OUT. The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter
D e s c r i p t i o n 250 The SF2 series suction filter are designed for reservoir side-wall applications. This completely new design of filter allows the filter within the filter preventing oil loss from
NORMAN FILTER COMPANY PRODUCT OVERVIEW
NORMAN FILTER COMPANY PRODUCT OVERVIEW LEADING THE WAY IN QUALITY FILTRATION WWW.NORMANFILTERS.COM FILTER ELEMENT INTERCHANGE Tee-Type Filter 4500, 14500, 34500, and 54500 Series Mini Tee-Type Filter 4100
LEIF LEIF. BGT Series. Tanktop Mounted Return Line Filters Max. 2400 I/min - 10 bar. Patented LEIF elements safeguard filtration quality
GT Series Tanktop ounted Return ine Filters ax. 24 I/min - bar atented IF elements safeguard filtration quality When high flow performance is needed N INNOVTIV GRN FITR FTURING IF IF The GT Series features
The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron.
D e s c r i p t i o n 500 The SF2 series are designed for reservoir side-wall mounting applications, suitable for flow rates to 850 l/min and filtration from 25 to 250 micron. A major feature of these
SCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
Duplex Filters 40 FLDK 0008(C)-0120(C)
Industrial Filters Accumulators Duplex Filters 40 FLDK 0008(C)-0120(C) Filters for inline installation for continuous operating Ball valve change over Optimised flow characteristics by 3D computer aided
Return line filters. Return line filters
Return line filters Return line filters Index Technical data - 5 Filters series 6 Filters series --3 8 ccessories Spare parts Uni-ardan Italia S.p.. reserves the right to make technical changes to the
Pipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
OEM-EP Pressure Controllers
Pressure Controllers Typical Applications Carrier Gas Pressure Control Air over Liquid Control Mass Spectrometer Process Gas Supply Pressure Control Miniature ler The Miniature ler converts a variable
Reusable contamination basket prevents loss of retained contaminants into the reservoir during element replacement.
APPLICATION RETURN LINE FILTERS Series RF & RFD Pressures to 36 PSI Flows to 3 GPM HYDAC RF and RFD In-Tank Return Line Filters are designed for use on hydraulic power units, machine tools, plastics machinery,
Indicators Series FPC
Indicators Series FP Max 40 bar Global Filtration Technology FP TYPIAL APPLIATIONS Industrial Equipment Mobile Equipment Marine/Offshore Applications ompetitor Housing The FP range of filter condition
Safety for Hydraulics Leak free check valve, pilot operated, series ERV Cartridge type, two stage
Safety for Hydraulics Leak free check valve, pilot operated, series Cartridge type, two stage prevents a load from falling if a burst occurs in feed pipe hardened seat and poppet prevents creep of hydraulically
Backflush filter R8-30W
Backflush filter R8-30W With internal pressure segment cleaning, rated pressure to 40 bar (580 psi) Connection sizes: DN 200 to DN 500, welded design 1. Features Powerful, fully automatic filtration _
SMR Series Submicronic Removal Fluid Purifi cation Systems
SMR Series Submicronic Removal Fluid Purifi cation Systems 193 SMR Series Applications The SMR Series is the smart purification solution for fluid flow in the 2-10 GPM (8-38 LPM) range. The SMR contains
Chapter 6: Check Valves
Contents Chapter : Check Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/8 1/4 3/8 1/2 3/4 1 0 10 1 25 32 Shuttle valves SSR -2 Check valves, direct operated RK / R CS SPZE SPV
Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI KSWA3... SW-3... Ball sert Type...9./2.... 42/6... 3 K2A... 3Z... Poppet sert Type...38/1... 3/... 4 CS41B... C4-3...
Vickers. Check Valves. Check Valves. Inline, right angle, manifold mounted, and pilot operated designs. Released 9/93
Vickers Check Valves Check Valves Inline, right angle, manifold mounted, and pilot operated designs Released 9/93 645 Introduction Vickers inline, right-angle, and manifold mounted check valves are direct
FRL/AirCare Air Controls & Accessories
FRL/irare ir ontrols & ccessories Lincoln Regulators, Filters & Lubricators well-planned compressed air system ensures minimum pressure loss in the system, and the removal of contaminants: water, compressor
A10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
Series TMM Axial Piston Motor. Technical Information
Series TMM Axial Piston Motor Technical Information General Description GENERAL DESCRIPTION These motors are designed primarily to be combined with other products in closed circuit systems to transfer
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400. Industrial Filters Accumulators. Filters for inline installation for continuous operation
Industrial Filters Accumulators Duplex Filters 40/160 LD 0003-0045 40/160 LDN 0040-0400 Filters for inline installation for continuous operation With integrated pressure equalisation valve Optimised flow
New. absolute filter elements independently tested in the following Institutes: MPH-MPI 02050/7.99/USA 2 COVER INSERT
e s c r i p t i o n MPH and MPI series filters are designed for returnline applications and provide various installation applications. The filters are installed semiimmersed or totally immersed into a
*Rated to 207 Bar/3000 PSI with Aluminum Body. Catalog HY15-3501/US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type... 5/132...
FILTRATION AMIAD PLASTIC FILTERS, SCREENS & DISCS
4 AMIAD PLASTIC FILTERS, SCREENS & DISCS Max pressure 10.0 Bar, max temperature 60 O 3/4 to 1 1/2 bodies manufactured from polyacetal 2 bodies and above manufactured from polymade and glass fibre 3/4 to
PVS 185, 600, 1200, 1800, 2700 Series Portable Purification Systems
185, 600, 1200, 1800, 2700 Series Portable Purification Systems FEATURING Global Filtration Technology PRINCIPLES OF OPERATION Contaminated oil is drawn into the Parker Portable Purification System by
FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
RMF TANDEM 900 OFF-LINE FILTER SYSTEMS
RMF TANDEM 900 OFF-LINE FILTER SYSTEMS RMF Tandem 900 Off-line filter Systems can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated
Hydraulic Flow Control Valves
Webtec Products Limited Hydraulic Flow Control Valves Quality Hydraulic Components from the Webtec Range CONTENTS DESCRIPTION PAGE No. ILFC Series Fixed Flow Pressure Compensated Control Valve 1 VFC Series
2011 DC Electropumps Bull. Rotation Ø 15 6,45 3,5 5,7
Ø 5 ±. DC Electropumps Bull,5 Rotation,5 5,7 Email: sales@hydronit.com Fax B... Electro pumps Bull series MODEL CODE EPB,5 DC /S5 K, V** Electro Pump Bull series Gear pump displacement (cc/rev (see tables
*Rated to 207 Bar/3000 PSI with Aluminum Body. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Bodies & Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI STANDARD CHECKS D1A6... 2U... Valve Insert, Ball Type...145/38... 42/6... 5 D1B125... 2C... Valve Insert, Ball Type...
Filter Elements E 7.200.9/05.06
HYDAC Filter Elements safeguard the performance and service life of essential and expensive hydraulic components due to their high standard of quality Filter Elements Technical details: Absolute filtration
Fittings, Tubing & Nipples
s, Tubing & Nipples P Series Pipe s s to 15,000 psi (1034 bar) Since 1945 Parker utoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and
Piston Accumulators. SK Series. Accumulator Catalog. Piston Types. Description. Sealing Systems. End Cap. O-ring. Sealing System. Piston.
SK Series Piston Types TYPE 2 pplication: Low-friction design for higher piston speeds, slow movements without stick-slip effect and high number of actuations (millions). ctual cycles achieved will vary
Water Separator. Main Line Filter. Mist Separator. Micro Mist Separator 150C 250C 350C 450C AMG 550C 2C 4C 8C 11C AFF 22C 37B 75B 150C 250C 350C 450C
Water droplet removal Water Separator Water droplet separation rate: % Model Flow capacity l/min (ANR) Max. flow capacity at 0.7 MPa inlet pressure 300 750 1,500 AMG 2,0 AMG to AMG/ Large dust particle
Flow Control Valves. Note: Also see R04C3 on page DC1. Denotes New Winner s Circle Product Line. Catalog HY15-3502/US
Catalog HY15-352/US Contents Control SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI NEED VALVES J2A2... C8-2... Needle Valve, Cartridge Type...45/12... 42/6... 5-6 NVH81... C8-2... Needle
PVS Series - Models 185, 600, 1200, 1800 and 2700
PVS Series - Models 185, 600, 1200, 1800 and 2700 Reduce the catastrophic results of water contamination Eliminate water from the hydraulic system The PVS Series Portable Purification Systems, available
VSO MAX HP High Flow Proportional Valve
VSO MAX HP High Flow Proportional Valve Typical Applications Ventilators Insufflators Anesthesia Delivery & Monitors Pressure & Flow Control Mass Flow Control Product Specifications Physical Properties
P2/P3 Series Piston Pumps Variable Displacement zp09. Catalog HY28-2662-CD/US
P2/P3 Series Piston Pumps Variable Displacement zp9 Catalog HY28-2662-CD/US A3 Series P2/P3 A4 General Information General Information Series P2/P3 P2 Series The newly developed variable displacement piston
USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI 53072 U.S.A. Tel: 262-691-2222 FAX: 262-691-0312 E-mail: sales@dynexhydraulics.
SPECIFICATIONS PF1000 Series Fixed Displacement Pumps Also refer to "Checkball Pump Installation and Operating Recommendations" Bulletin PSI.CB (dynexpumpinstallation.pdf) CONTACT INFORMATION USA Headquarters
PAJ GROUP DEVELOPMENT OF ADVANCED MECHATRONICS
111881-901 version 1.29 WTER IN OIL SENSOR (WIO) Product Overview The WIO-Sensor technology is a secure on-line system monitoring the water content in oil. Water or moisture is the second largest contamination
SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED
SPERRYN GAS CONTROLS DELTA FLUID PRODUCTS LIMITED Domestic and Non-Domestic Meter Regulators G940/G941 - Domestic Meter Regulator Domestic regulator offering high performance in a compact unit. Sizes:
6 Crankcase Ventilation
6 Crankcase Ventilation Introduction... 6-3 Crankcase Ventilation Manager (CVM)... 6-5 Introduction... 6-6 CVM280B..................................... 6-7 CVM280T... 6-10 CVM424B....................................
Hydraulic Control Solutions
Hydraulic Control Solutions Vexve s Hydrox hydraulic control solutions are suitable for even the most challenging installation sites and conditions. Specifically designed for district heating and district
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
Ultipleat High Flow Filter System
Data Sheet PIUFFSENa Ultipleat igh Flow Filter System Description The Ultipleat igh Flow filter is a large diameter, coreless, single open ended, pleated cartridge with an inside-to-outside flow pattern.
Pressure Relief. Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 VICKERS. Basic Characteristics. Sectional Illustrations
VICKERS Pressure Relief Pressure Control Valve R(C)G(O)-03, 06 and 10; R(C)T(O)-03, 06 and 10 Sectional Illustrations RCG-** Model Shown RCT-** Model Shown Basic Characteristics Type...................
The conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
Chapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
Flow Control Valve. 1 Descriptions. 2 Symbols. Series SRCB.. 1.1 Generals. 1.2 Application examples. 2.2 3-way flow control. 2.1 2-way flow control
Flow Control Valve Series SRCB.. plug-in solenoid for easy coil change flow rates are unaffected by temperature change or when the higher load pressure alternates between the outlet ports energy - optimised
Filter/Regulators Compressed air, general purpose, and Instrument Filter/Regulators 1/8" to 1-1/2" port sizes
Section 12 Filter/Regulators Compressed air, general purpose, and Instrument Filter/Regulators 1/8" to 1-1/2" port sizes B7 Miniature eneral Purpose Filter/Regulator 1/8" and 1/" ports...................................le-12-2
QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
367 000 Suction assembly for 1.000 l IBC and 205 l drums 1.060 mm suction tube. 367 003 Suction assembly for tanks 1.600 mm suction tube.
PUMPMASTER 2 accessories, other MOBILE oil dispensers PumpMaster 2 Accessories 01 OIL PUMPS 360 1 360 120 367 000 367 011 369 910 360 1 Wall bracket 360 120 Floor bracket 360 001 Bung adaptors 2" (M) connection
SOLENOID VALVES AND PNEUMATIC VALVES
2 A S E R I E S Catalogue 2005-2006 Directly operated solenoid valves Series A 2/2 way, 3/2 way monostable, bistable (with magnetic memory) Ports M5,, cartridge ø4 The Series A solenoid valves are of the
Aerospace and Defence
Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems World Class Filtration Solutions Porvair Filtration Group Aerospace and Defence Hydraulic, Fuel, Lubrication and Air Systems Porvair Filtration
SOLENOID VALVES 3-4 WAY
SOLENOID VLVES - WY IE/C// CT: FP/VCR Page: 7 SHEET: / SOLENOID VLVES - - WY CV SOLENOID VLVES -WY/-POSITION /- UNF.7 5.7 The electric valve is a -way -position directional electrically controlled Slight
HOW THE CONTAMINATION IS MEASURED CONTAMINATION CLASSES ACCORDING TO ISO 4406:1999
CONTAMINATION CONTROL in hydraulic systems in the hydraulic system is a very wide and complex matter; the following is just a short summary. Our Customer Service is at your disposal for any further information.
4" SUBMERSIBLE PUMPS
4" SUBMERSIBLE PUMPS 4" SUBMERSIBLE PUMPS 50/60 HZ Multi-stage centrifugal submersible pumps for clean water in 4" wells. The 4" VSP pump series is carefully designed and manufactured for maximum resistant
IMPORTANT DOCUMENTATION DO NOT DISCARD!
PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance
HIGH PERFORMANCE FILTERS AND ELEMENTS
HIGH PERFORMANCE FILTERS AND ELEMENTS FILTRATION Fil*tra*tion (fil-tra-shen) n. The act or process of filtering. What exactly is filtration and why is it an integral part of today s industries? Simply
Melt Blown Filter Technology
Melt Blown Filter Technology RECOMMENDED FOR INDUSTRIAL APPLICATIONS Filters for water, aqueous solutions and low viscosity process fluids IMMELTEN8 Melt Blown Filter s 'Pall' has supplied Melt Blown media
Miniature Pneumatic Solenoid Valve. Power Options: 0.5 Watt (6 psig model) 1.0 Watt (30, 100 psig model) Voltage Options: 3, 5, 12 or 24 VDC
8mm Solenoid Valve Typical Applications Portable Equipment Blood Pressure Monitoring Wound Therapy Air and Oxygen Delivery Sensor Zeroing Product Specifications Mechanical Valve Type: 3-Way, Solenoid-actuated
Oildyne. 165 Series Hydraulic Power Units. Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm)
Oildyne Hydraulic Power Units Pressures to 241 bar (3500 psi) Flows to 5.4 lpm (1.4 gpm) 11 Power Unit Features We are pleased to introduce our new power units. The power units let you put more power where
Variable Displacement Pump AA10VSO
Variable Displacement Pump AA10VSO Series 31, Industrial Model, for Open Circuits Axial piston, swashplate design Brueninghaus Hydromatik Sizes 28...140 Nominal pressure 4000 psi Peak pressure 5100 psi
DT Series. Features FLOW. DT-MFMO Male Flare 37 JIC Inlet to Male O-Ring Boss Outlet. DT-MSMO Male Seal-Lok Inlet to Male O-Ring Boss Outlet
Check s Parker Check s Offer the eatures of a Compact, and up to 5 psi Maximum Operating Pressure. The check valves utilize the de pend able, internal design features found in Parker check valves, but
Flowmeters & Monitors. FDHB347UK August 2007
Flowmeters & Monitors FDH4UK ugust 200 onsistent quality Technical innovation Premier customer service Hydraulic, Lubrication & oolant Filtration High-performance filtration systems for production machinery
3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
Open center control block in monoblock design MO-40
Open center control block in monoblock design MO-40 RE 64370 Edition: 02.2015 Replaces: 02.1985 Size 40 Series 1X Maximum working pressure on pump side 350 bar on consumer side 420 bar Maximum flow 680
Automatic Self-Cleaning Strainers
Applications Water and Liquid service Power Industry Cooling water Pulp & Paper Removing fibers Process Equipment Protect equipment Metal & Mining Quenching, blast furnace cooling Automatic Self-Cleaning
Model 4418F. www.amot.com. Overview. Typical applications. Key features and benefits. Accreditations. Starting air/gas valve Vented fuel gas valve
High Pressure Control Valve Model 4418F Overview The 4418F has been designed specifically for use as an air start valve for diesel engines or as a fuel shut-off valve for gas turbine applications. Its
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Index 11.1. Page. Pumping Systems...11.2-11.4 Intensifiers...11.5 Gas Boosters...11.6-11.7 High Pressure Generators...11.8-11.9
Pumping Systems, Intensifiers, Gas Boosters and High Pressure Generators High Pressure Equipment Company produces a number of components and systems for general industrial, elevated pressure applications.
Pressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
Vickers. Piston Pumps
Vickers Piston Pumps xial Piston Pumps Fixed and Variable Displacement PF, PF, PF PV /6, PV /, PV /9, PV and PV 9 to SE PV /6, PV /, PV /9 to DIN/ISO 39, Part G-379 Contents asic characteristicts..........................................................................................3
H1 Axial Piston Pump, Size 078, Single Technical Information Dimensions
Input Shafts Option G1, ISO 3019-1, outer dia 32 mm-4 (SAE C, 14 teeth) 31.5 ±1 [1.240 ±0.039] MOUNTING FLANGE SURFACE FLANGE 127-4 PER ISO 3019-1 SPLINE DATA NUMBER OF TEETH : 14 PITCH FRACTION : 12/24
ECOCIAT. Domestic hot water heat recovery unit
Heat recovery unit Domestic hot water High energy efficiency with R410A Compact and quiet Scroll compressors Brazed-plate heat exchangers Heating Heat recovery ENVIRONMENTALLY HFC R410A PROTECTION DE FRIENDLY
Sensors. Sensors. All Cylinders. Specifications. Features: Features Type REED HALL EFFECT NPN or PNP. Ø8mm - 125mm
Specifications Features Type REED HALL EFFECT NPN or PNP Applicable Series Configurations Construction Materials Body Mounting Bracket Cable Characteristics Operating Temperature Accuracy All Cylinders
Pressure Relief Valves SPV, SPVF
Pressure Relief Valves SPV, SPVF Construction of the Pressure Relief Valves SPV, SPVF Symbol Description The direct spring, sliding piston Pressure Relief Valve SPV/SPVF is intended for inline mounting
Product Manual. CVS Type 67AFR Filter Regulator. Introduction. Installation. Description
Product Manual CVS Type 67AFR Filter Regulator Introduction This CVS Controls product manual includes instructions for the installation, adjustment, maintenance and parts ordering of the CVS Type 67AFR
How To Control A Power Supply With A Mini Transmitter And Switch (Power Supply)
transmitter (2 wire) / switch for continuous or On/Off Control Indication, monitoring, transmitting and continuous or On/Off control in one device Output signal 4...20 ma, 2-wire for continuous control
Single sub-base valve
solenoid valves Mini-valves 10 mm Electrical connection... Mounting... Port sizes... Rated temperature... Fluid... Working pressure... Nominal flow... Pneumatic connections Voltage... Power... NC poppet
MVX-Series Diesel Engine Air Shut Down Valves
MVX-Series Diesel Engine Air Shut Down Valves (Cable operated closure/integral reset lever types) Selection, Application and Maintenance SPECIAL VALVE MVX-304 This is a special version of valve type MVX-303
SUPRApak M Series Filter Systems SUPRApak Filtration For Medium Batch Depth Filtration
SUPRApak M Series Filter Systems SUPRApak Filtration For Medium Batch Depth Filtration FBSPAKMSAENf Technical Information SUPRApak M Series-SA filtration units are turn-key systems designed for use with