Coreless Spin-On Filters. 12AS/50AS Series

Transcription

1 Coreless Spin-On Filters 12AS/5AS Series

2 Coreless Spin-on Filters 12AS/5AS Series The Smart Alternative to Spin-on Cans! Features: Parker engineers have developed an innovative alternative to the age old spin-on style can. This new design provides all of the benefits of high efficiency, long life Ecoglass III filtration, without the environmental impact. The new environmentally-friendly 12AS and 5AS hydraulic filters feature a reuseable bowl and a patented filter element constructed primarily of nylon and fiberglass. The element core is permanently attached as part of the filter bowl. When replaced, the element reduces costs, eliminates hot drain requirements, can be easily incinerated, and is better-suited for most landfills. The 5 psi filters are rated up to 5 gpm, with premium Ecoglass III elements as standard offerings. The patented element design also prevents filter operation if the proper element is not in place. Applications: Mobile Ag Mobile Construction Material Handlers Aerial Lifts Pilot lines Charge pump hydrostatic drives Industrial power units Machine tools Feature Advantage Benefit 5 PSI operating pressure Withstands pressure surges, allows Broader applications compared application versatility. to 15 PSI rated spin-on cans. Patented element Provides head-to-bowl seal. Provides optimum leak-free Must be installed for operation. performance. Ensures original element Meets system cleanliness must be used. requirements. Coreless Ecoglass elements Lightweight, non-metallic. Reduces disposal costs. Ease of service and disposal. Can be incinerated. Low environmental impact in landfills. Spin-on filter assembly Improved, cost-effective design. Easy to maintain. w/reuseable bowl

3 Coreless Spin-On Filters 12AS/5AS Series Specifications Pressure Ratings: Maximum Allowable Operating Pressure (MAOP): 5 psi (34.5 bar) Fatigue: 4 psi (27.6 bar) 1,, cycles: -4 psi Design Safety Factor: 2.5:1 12AS-2 5AS-1 Operating Temperatures: Buna: -4ºF to 225ºF (-4ºC to 17ºC) SECTION A-A SECTION A-A Element Collapse Rating: 15 psid (1.3 bar) Element Condition Indicators: Gauge: -6 psi color coded (For use in low pressure applications only.) Pressure Switch: normally open, 2 ± 2 psi, 24 VDC Materials: Head: die cast aluminum Bypass valve: nylon with steel spring Filter element: fiberglass and polyester with nylon endcaps Bowl: steel Permanent core: steel INLET A OUTLET PORTS AVAILABLE SAE 12 G 3/4 3/4" NPT BOTH SIDES 1.5 A TORQUE BYPASS FT-LBS. PORTS AVAILABLE SAE 2 G 1 1/4 1 1/4" NPT BOTH SIDES 1.88 A OUTLET A INLET Weights (approximate): 12AS-2...3lbs. (1.4 kg) 5AS-1...6lbs. (2.7 kg) TYP. 1/8-27 NPT GAGE PORT 4 PLACES 1/4-2 UNC-2B,.38 MIN FULL THREAD DEPTH 2 PLC'S /16-18 UNC-2B 6 PLACES TORQUE 25-3 FT-LBS. 1/8-27 NPT GAUGE PORT WITH HEX SOCKET FLUSH PLUG INSTALLED 4 PLACES TORQUE: 3-35 FT.-LBS ±.6 (12AS-2) ±.6 (5AS-1) 1. MINIMUM ELEMENT REMOVAL CLEARANCE 1.5 MINIMUM ELEMENT REMOVAL CLEARANCE 1.25 HEX Ø 5. Ø 3.75

4 Coreless Spin-on Filters 12AS/5AS Series 12AS-2 Performance Beta Rating Efficiency Efficiency % Capacity Q Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO 15 gpm to 5 psid terminal - 1 mg/l BUGL Refer to Appendix for relationship to test standard ISO LPM Flow vs Pressure Loss LPM SUS SUS Empty Housing Q /4 Nominal Port Size GPM GPM

5 Coreless Spin-On Filters 12AS/5AS Series 5AS-1 Performance Beta Rating Efficiency Efficiency % Capacity Q Q Micron Size (c) Capacity grams Results typical from Multi-pass tests run per test standard ISO 3 gpm to 5 psid terminal - 1 mg/l BUGL Refer to Appendix for relationship to test standard ISO LPM Flow vs Pressure Loss LPM SUS SUS Empty Housing Q /4 Nominal Port Size GPM GPM

6 Coreless Spin-on Filters 12AS/5AS Series Service Instructions 12AS/5AS Series Filter Service Filter element should be replaced as indicated by filter indicator gauge,or at specified service intervals recommended by the OEM. Replacement element procedure A. Shut down system and release pressure in the filter line. B. Loosen bowl and remove rotating counter clockwise. C. Remove dirty element from filter head and discard. D. Lubricate element seals on clean element and install on filter head element locator. E. Install reuseable bowl onto element and filter head. Tighten to specified torque Parts List Index 12AS 5AS 1 Head SAE N/A 3/4" NPT N/A G3/4" BSPP N/A SAE-2 N/A /4" NPT N/A G1 1/4" BSPP NA Bypass 25 psid assembly psid assembly Element Single E N/A 94816Q E N/A 94817Q 1QE N/A 94818Q E N/A 94819Q Double E 9476 N/A E 94764Q N/A 1QE 94763Q N/A E 9476 N/A 4 Bowl Single N/A Double N/A 5 Gauge 5 bypass bypass Pressure Switch 5 bypass bypass /8 NPT THREAD Indicator Gauge (25 PSI) Linear Measure = inches mm Pressure Switch

7 How To Order Select the desired symbol (in the correct position) to construct a model code. Example: Coreless Spin-On Filters 12AS/5AS Series BOX 1 BOX 2 BOX 3 BOX 4 BOX 5 BOX 6 BOX 7 BOX 8 12AS 2 1QE B P G S12 1 BOX 1: Basic Assembly 12AS Coreless Spin-On, 2 GPM nominal 5AS Coreless Spin-On, 4 GPM nominal BOX 6: Bypass G K 25 (1.7 bar) 5 (3.5 bar) BOX 2: Length 1 Single (5AS model only) 2 Double (12AS model only) BOX 3: Element Media E Ecoglass III,2µm E Ecoglass III,5µm 1QE Ecoglass III,1µm E Ecoglass III,2µm BOX 4: Seals B Nitrile (NBR) Consult Factory for additional seal options BOX 5: Indicator P Gauge Ports (4) Plugged Replacement Elements (Ecoglass) BOX 7: Ports 12AS S12 SAE-12 integral threads* N12 3/4" NPT integral threads G12 G¾" BSPP (ISO 22) integral threads 5AS S2 SAE-2 integral threads* N2 1¼" NPT integral threads G2 G1¼" BSPP (ISO 22) integral threads *Porting recommended for best delivery. BOX 8: Option 1 No options Accessories Filter Model - Nitrile seals Part Number Media 12AS-2 5AS Pressure gauge, 2" -6 psid (25 psid bypass) E Q Pressure gauge, -1 psid (5 psid bypass) E 94764Q 94617Q Pressure switch, 2 ± 2 psid 24 VDC 1QE 94763Q 94618Q (25 psid bypass) E Q Pressure switch, 43 ± 3 psid (5 psid bypass) Accessories for use in low pressure application only.

8 Parker Worldwide Sales Offices Contact Parker s worldwide service and distribution network by calling: Argentina +54 (1) Australia +61 (2) Austria +43 (2622) Belgium +32 (2) Brazil +55 (11) Canada China +86 (21) Czech Republic +42 (2) Denmark +45 (43) Finland +358 () France +33 (5) Germany +49 (69) Hong Kong Hungary +36 (1) India +91 (22) Italy +39 (2) Japan +81 (45) Korea +82 (2) Mexico Netherlands +31 (541) 85 New Zealand +64 (9) Norway +55 (99) Poland +48 (22) Singapore South Africa +27 (11) Spain +34 (1) Sweden +46 (8) Taiwan +886 (2) United Arab Emirates +971 (2) United Kingdom United States of America Venezuela +58 (2) Filtration Group Technical Sales & Service Locations 1681 Fulton County Road # Phone: (8) Phone: (419) Fax: (419) Process Advanced Filtration 234 Eastman Ave. Oxnard, CA 933 Phone: (85) Fax: (85) Racor Division 34 Finch Road P.O. Box 328 Modesto, CA Phone: (8) Phone: (29) Fax: (29) Filtration and Separation, Finite Filter Operation 5 Glaspie Street Oxford, Ml Phone: (8) Phone: (248) Fax: (248) Filtration and Separation, Balston Operation 242 Neck Road P.O. Box 8223 Haverhill, MA Phone: (8) Fax: (978) Filter Division U.K. Condition Monitoring Centre Brunel Way Thetford, Norfolk IP24 3RT England Phone: (44) Fax: (44) Parker Hannifin Oy Filter Division Europe (Finn Filter Division) FIN-317 Urjala As. Finland Phone: Fax: Parker Hannifin Ind. e Com. Ltda. Filter Division Av. Getulio Dorneles Vargas 1331/ Jacarei, SP Brasil Phone: Fax: Parker Hannifin Asia Pacific Company, LTD 92 Dae Heung Bldg Yeoksam-dong Kangnam-ku, Seoul, Korea Phone: Fax: Parker Filtration BV Filter Division Europe Stieltjesweg BV Arnhem The Netherlands Phone: Fax: Fulton County Road # Phone: (8) Phone: (419) Fax: (419)