Corporate information, production, testing facilities, warranty
|
|
- Barnaby Briggs
- 8 years ago
- Views:
Transcription
1 Kempchen Dichtungstechnik GmbH Im Waldteich 21, 467 Oberhausen m² working, energy providers and shipyards and motor construction Production of gaskets, packings, compensators, rubber and plastics; technical consulting including design, computation and development DIN EN ISO 9001, DIN EN ISO 001, BS OHSAS 18001, RAL, API, KTA 01 Turning lathes (up to Ø 4,800 mm) CNC lathes Shears (notching, rotary, squaring) Laser-beam unit Punching machines Presses (primary products) Winding machines Branding machines for packings Annealing furnace (only for soft-annealing of non-ferrous metals and soft iron) Presses (finished products) Tool manufacture and maintenance 241
2 Available testing facilities Chemical Laboratory Test equipment for the Anionennachweis; inter alia, soluble chlorides, fluorides, sulfates, and total chlorine and total sulfur. Ion chromatograph; Dionex ICS Type 100 with AS22 Tube furnace with controllable gas supply; (up to 900 C) Heraeus Thermal analysis Differential scanning calorimetry; Netzsch DSC 200 type / Maia (-150 C to +600 C) Simultaneous thermal analysis, DSC and thermogravimetry; Netzsch, model STA / Jupiter (+25 C to 1550 C) Muffle Furnaces Company Carbolite (up to 1100 C) Company LINN (with controllable purge gas (up to 1200 C) Hardness tester, DIGI-TEST Shore A / B / 0 Shore D / C / D0 micro IRHD Stereomicroscope Application Technology (Physical Laboratory) Test presses for determining characteristic values according to DIN EN AMTEC I (1000 kn; 400 C) AMTEC II (1000 kn; 500 C) Klinger (500 kn; 400 C) Mass spectrometer for determining leakage Leybold I (PhoniXL 300) Leybold II (PHOENIXL300) Profile recording device Mitutoyo Contraser CV1000 Fuji Prescale film scanner evaluation Canon FPD-8010E Universal measuring amplifier with force and displacement transducers HBM measuring amplifiers Quantum X (4 channel and 8 channel) HBM Force Transducer (KMR/200 kn) HBM load cells (C9B 20 kn) HBM transducers (WI/5MM-T) Universal heating cabinet Memmert (UFE 400/300 C) Climatic cabinet (temperature and humidity) Company Tabai Espec (-70 to +160 C) Warranty All information and technical specifications contained in this prospect are accurate to the best of our knowledge and belief at the time of compilation of this brochure. They are intended to provide information about our products and their various applications. Therefore we accept no liability for the specific properties or suitability for concrete uses provided in this brochure, with the exception of any express warranties issued in writing on a case-by-case basis. Any applicable industrial property rights are to be observed. By placing an order, the customer accepts our terms and conditions, which are available for review at any time. 242
3 A. W. Schultze GmbH Mercatorstraße 10, Geesthacht Production area: m² working, energy providers and shipyards and motor construction Flat gaskets made from all common materials and ready-made products Gasket production, technical consulting, development and design of sealing connections DIN EN ISO 9001, VDTÜV TRD 401, KTA 01 Punching machines Presses Welding machines Flanging machines Mechanical workung machines Cutters 243
4 Kempchen Leuna GmbH Am Haupttor, Building Leuna m² working, energy providers Production of trade with gaskets, packings, compensators as well as service, technical consulting, computation DIN EN ISO 9001 Turning lathe (up to Ø 500 mm) Shear Cleaning plant for grooved gaskets up to Ø 1000 mm Punching machine 244
5 Kempchen Dichtungstechnik GmbH Service-Stützpunkt Schwedt Passower Chaussee Gelände der PCK GmbH Schwedt/Oder m² working, energy providers Production of gaskets; technical consulting; service DIN EN ISO 9001, DIN EN ISO 001, BS OHSAS Primary production facilities Punching and cutting machines Windeing machines Indent machines Lathe 245
Calibration. How can you get lower costs for the calibration? What is traceability? What is measurement uncertainty? What is calibration?
Calibration Tvinnargatan 25 SE-507 30 Brämhult SWEDEN Phone: +46 33 22 56 30 Fax: +46 33 13 88 71 info@kalibrera.se www.kalibrera.se In May 2011 Elastocon purchased the company Mätcentrum in Eskilstuna,
More informationProducts. EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview
Products EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview High quality, Comprehensive and applicationoriented We Have the Right Solution High Quality and Quickly
More informationCrevice Corrosion on Stainless Steel Propeller Shafts
Crevice Corrosion on Stainless Steel Propeller Shafts A Quick Summary: What is it? How to Prevent it. How to Repair it. Stainless steel propeller shafts and running gear are subject to pitting & crevice
More informationENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING
ENERGY HYDRO POWER SOLUTIONS FOR ELECTRICAL POWER TRANSFER ELECTRICAL PROTECTION SEALING MERSEN A world leader committed to Renewable Energies A world leading supplier of electrical protection, sealing,
More informationPuddle Flange. FRANK Puddle Flange
Puddle Flange FRANK Puddle Flange The problem Problems keep on occurring when connecting pipes during construction work. Pipes laid in the ground must be introduced into concrete walls or shafts. In many
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationngenieros Ingenieros Asociados De Control S.L.
ngenieros sociados de ontrol 1 Company founded in 1985 to serve commercial and technical assistance in the fields of instrumentation, control and installation for all types of industries. We offer top
More informationSIGRAFLEX EMAIL. Properties. Applications
Multilayer sealing sheet, adhesive-free made from flexible graphite foil reinforced with stainless steel foils especially for use in PTFE envelope gaskets SIGRAFLEX EMAIL has been developed specially for
More informationNEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE
B4 NEW SIX-SEALS CUTTING RING. INTERNATIONAL INDUSTRIAL PATENT Nr. 864061 of the 10/03/99 FLANKS AND DOES NOT REPLACE THE STANDARD RING CURRENTLY IN USE AVAILABLE IN CARBON AND STAINLESS STEEL 23 THEORY
More informationSpiroflex spiral-wound gaskets
Spiral-wound gaskets have long been used as sealing elements in refineries, chemical plants, gas installations, water treatment plants and in general pipeline construction. Spiroflex gaskets SpV retain
More informationThermal diffusivity and conductivity - an introduction to theory and practice
Thermal diffusivity and conductivity - an introduction to theory and practice Utrecht, 02 October 2014 Dr. Hans-W. Marx Linseis Messgeräte GmbH Vielitzer Str. 43 D-95100 Selb / GERMANY www.linseis.com
More informationMARC5001A Employ tools, equipment and materials in a shipboard context
MARC5001A Employ tools, equipment and materials in a shipboard context Release 1 MARC5001A Employ tools, equipment and materials in a shipboard context Modification History Release 1 This is the first
More informationAAF Manufacturing Services. Leading the way in engineering excellence
AAF Manufacturing Services Leading the way in engineering excellence Contents Introduction Parts Manufacture Weld Assembly Surface Protection Mechanical & Electrical Final Assembly service agreements Introduction
More informationAPPLICATION COMPETENCY FIELD
UNIT CODE UNIT TITLE APPLICATION COMPETENCY FIELD ELEMENTS Elements describe the essential outcomes. 1 Follow safe work practices MARC018 Employ tools, equipment and materials in a shipboard context This
More informationAMF Line; wall absorbers Wall mounted acoustic designs PERFORMANCE CEILINGS. M ore s c op e f or i n n ovat i on MADE IN GERMANY
PERFORMANCE CEILINGS M ore s c op e f or i n n ovat i on AMF Line; wall absorbers Wall mounted acoustic designs MADE IN GERMANY 138568_Prospekt Wandabsorber_GB int.indd 1 Acoustic elements on the wall
More informationG8 GALILEO. Innovation with Integrity. High-End Melt-extraction Analyzer. Inert Gas Method
G8 GALILEO High-End Melt-extraction Analyzer Innovation with Integrity Inert Gas Method Determination of O, N and H The market demands Metals, minerals, and inorganic compound markets demand high-quality
More informationPlant components, selected for sound performance
Plant components, selected for sound performance Selected plant components to meet our customers demands We provide a wide range of plant components offering lowest cost of ownership, high product safety
More informationHose and Tube Fittings Series 1-3
Embracing Challenge Hose and Tube Fittings Series 1-3 out of plastics PP, PVDF, PTFE Series 1 Special Features Corrosion resistant Gas tight Easy to handle Different connection threads Application Hose
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationHigh-speed spiral doors for deep-freeze applications. TK Series
High-speed spiral doors for deep-freeze applications TK Series 02 TK Series The cold chain for deep-frozen products must never be interrupted during storage and transport. This demands an enormous amount
More informationLithium Iron Phosphate High Current Rechargeable Lithium Ion Batteries
1 of 5 8/21/2006 2:37 PM Lithium Iron Phosphate High Current Rechargeable Lithium Ion Batteries Lithium Iron phosphate batteries are safer than Lithium-ion cells, and are available in 10 and 20 AH packs
More informationULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE
ULTRA 865HD HIGH PERFORMANCE MULTI PURPOSE GREASE Contains penetrants, lubricants and greases All weather Water-resistant Penetrates like an oil, then cures to a thick, water-resistant grease Recommended
More informationExternal Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual
conferdo GmbH & Co. KG External Quality, Environment, Health & Safety Management Manual with Integrated Welding Engineering Manual of the company conferdo GmbH & Co. KG STAHLBAU OHNE GRENZEN STEELWORK
More informationVdS 2100-09en. VdS Guidelines for water extinguishing systems. Non-return valves. Requirements and test methods. VdS 2100-09en : 2011-05 (01)
VdS Guidelines for water extinguishing systems VdS 2100-09en Requirements and test methods VdS 2100-09en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
More informationSECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
More informationUnmatched Metal Hardness Testing
Unmatched Metal Hardness Testing The Equostat 3 hardness tester can be connected both to the portable Equotip 3 platform and directly to a PC, with graphic user guidance Hardness Measurements made easy
More informationPLATE HEAT EXCHANGER. Installation Manual. Customer Name: Serial number: Purchase order number: Project:
PLATE HEAT EXCHANGER Installation Manual Customer Name: Serial number: Purchase order number: Project: Table of Contents ----------------------------------------------------------------- Page: 2 3 Name
More informationMESA MAKINA. Since 1979. Company Presentation. Welcome. Since 1979
Company Presentation Welcome Historical Time line of Mesa Foundation by Mr. Mehmet Tekelioglu Manufacturing casting part in house Achieving ISO9001:2000 certification by BVQI Achieving ISO TS 16949 certification
More informationtesting equipment for quality management Programme summary. METROLOGY Tensile and Pressure Testing Machines Measuring Devices Display Devices
testing equipment for quality management Programme summary. METROLOGY Sheet metal testing Surface testing Corrosion testing Tensile and Pressure Testing Machines Measuring Devices Display Devices The physical
More informationMRK/ 1-12-2011 Page 1(9) 2 Description and assessment of the Production process. 3 Description and assessment of the Surface Treatment Methods
Page 1(9) Plus+ 1 Description and assessment of the Materials used in the Product 2 Description and assessment of the Production process 3 Description and assessment of the Surface Treatment Methods 4
More informationLeak detection of systems
Leak detection of systems detection and remove Serviceportfolio resom ltd. Hydraulic checking in production plant's Examination with special measuring technique incl. documentation and rental of the measuring
More informationSondex Welded heat exchangers:
Sondex A/S is a Danish company specialized in the development, design and production of plate heat exchangers and freshwater distillers. Since its foundation in 1984 SONDEX has grown into a wide global
More informationInstallation Instructions
PUSH Installation Instructions A DA C O M PLIA NT shown with optional Bradley 90-75 faucet Front-Mounted Barrier Free Rectangular Bowl Stainless Steel Lav Table of Contents Pre-Installation Information...........2
More informationAlways. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+
Always. Reliable. Tight. Wall sleeves Versatile solutions for building entries. cablepipebuildingentry+ The wall sleeve The wall sleeve a largely unnoticed but very important sealing part. Wall sleeves
More informationHAND TOOLS FOR PLASTIC STRAPPING
HAND TOOLS FOR PLASTIC STRAPPING ORGAPACK solutions Hand tools for different applications Umreifungsband Plastic strap Packstücke Packages Leicht Light Medium-duty Mittelschwer Schwer Heavy With friction-weld
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More informationFree piston Stirling engine for rural development
Free piston Stirling engine for rural development R. Krasensky, Intern, Stirling development, r.krasensky@rrenergy.nl W. Rijssenbeek, Managing director, w.rijssenbeek@rrenergy.nl Abstract: This paper presents
More informationDifferential Scanning Calorimetry DSC
Analyzing & Testing Differential Scanning Calorimetry DSC Technique, Instrument, Applications DSC 3500 Sirius DSC 3500 Sirius Principle of Operation Differential Scanning Calorimetry Differential Scanning
More informationPlate Heat Exchangers. Series FP, FPDW
Plate Heat Exchangers Series FP, FPDW With partnership into the future FUNKE is a leader in the development and production of quality heat exchangers with a heat transfer area of up to 2 400 m². The range
More informationINTRODUCTION. Dear Business Partners,
INTRODUCTION Dear Business Partners, We are proud to issue the new catalogue of STROJFERR s.r.o. which was established in 1997 as a genuinely Czech company. In its activities and production programme,
More informationA World Class Manufacturer of Induction Bends
A World Class Manufacturer of Induction Bends COFELY FABRICOM BENDING A leading position in bending High Flexibility and Close Tolerances As a world leading manufacturer of pipe bends, produced by induction
More information3-Component Measuring System
Force 3-omponent Measuring System for utting Force Measurement During Turning Modular system for measurement of cutting forces when turning outside and inside diameters on turret lathes. Machine adapters
More informationPlastics Engineering SYSTEM BEKAPLAST. Mechanically anchored thermoplastic lining for extreme conditions
Plastics Engineering SYSTEM BEKAPLAST Mechanically anchored thermoplastic lining for extreme conditions Beka_Gesamt_en 2014.indd 1 System BEKAPLAST Mechanically anchored lining systems to meet the highest
More informationExcellence in Specialty Steel
Welcome to BGH We are EXCELLENCE in Specialty Steel! Six production sites in Germany and Poland. Worldwide service through regional sales offices and distribution partners. Sustainability through continuous
More information3. Standards: Comply with ISO, BS, ASTM, JIS standard and so on.
INFORMATION Computerized Electronic Universal Testing Machin 1. Functions and Features: is high level computer controlled electronic UTM, dual space structure, tensile test executed at upper side of crosshead,
More informationXFA 600 Thermal Diffusivity Thermal Conductivity
XFA 600 Thermal Diffusivity Thermal Conductivity Thermal Diffusivity, Thermal Conductivity Information of the thermo physical properties of materials and heat transfer optimization of final products is
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationGrooved gaskets. Types of gaskets
Types of gaskets have proven extremely useful in all areas of industry, including the most demanding sealing tasks. Our grooved gaskets can be found in conventional power plants as well as in the primary
More information0845 0098 980 www.nicholsonsts.com
0845 0098 980 www.nicholsonsts.com ROOFTRAK The IFP is revolutionising the way we fix things to roofs. Technical Director of a leading UK roofing system manufacturer The ROOFTRAK-IFP A revolutionary solution
More informationMechanical Testing Equipment at MSSI
TITLE DESCRIPTION Tinius/Olsen Screw- Driven Straining Frame Equipped with ±25 kn and ±1 kn load cells for static testing at relatively low load levels (calibration: load cells: Jan. 2007, 100SC: Nov.
More informationPRODUCT DATASHEET. Confidex Ironside Micro CONTENTS
Confidex 2010 1 (6) PRODUCT DATASHEET Confidex Ironside Micro CONTENTS 1. PRODUCT DESCRIPTION... 2 1.1 SPECIFICATION DATA... 2 1.2 DIMENSIONS... 2 1.3 ELECTRICAL PERFORMANCE... 3 1.4 RESISTANCE AGAINST
More informationIntroduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft.
Introduction of ZF-Hungary Ltd. T-Eger ZF Hungária Kft. 1 2014 T-Eger, ZF Hungária Kft. Company History, ZF Group Milestones 1915 Foundation of Zahnradfabrik GmbH in Friedrichshafen by the Luftschiffbau
More informationAir technology solutions for demanding applications. Product overview. www.elektror.com17
Air technology solutions for demanding applications Product overview www.elektror.com17 Set benchmarks now. Efficient and high-performance solutions from one source. For the past 9 years Elektror airsystems
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
More informationRAMAX S Prehardened stainless holder steel
T O O L S T E E L F A C T S RAMAX S Prehardened stainless holder steel Wherever tools are made Wherever tools are used This information is based on our present state of knowledge and is intended to provide
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationButterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
More informationArtisanLink Staining System is an automated special stains slide
Technical Tips Tips on using the ArtisanLink Special Staining System Jamie Nowacek, BS, HT(ASCP) CM, QIHC, PMP Dako North America, Inc. Carpinteria, CA, USA ArtisanLink Staining System is an automated
More informationTUBE-TO-TUBESHEET JOINTS: THE MANY CHOICES ABSTRACT KEYWORDS. Seal welding, tube-to-tubesheet welds, heat exchanger, mock-up, tube expansion
B. J. Sanders Consultant 307 Meyer Street Alvin, Texas 77511 TUBE-TO-TUBESHEET JOINTS: THE MANY CHOICES ABSTRACT After a decision has been made to use zirconium as the material of construction for a shell
More informationEngineered Solutions
Engineered Solutions Long established partnerships bring together the world s leading instrumentation companies within BKW. Our manufacturing facility enables us to quickly adapt standard instruments to
More informationfoot skylight) is enough to knock a worker off their feet. A 10 mph wind gust on a 5 x 6 skylight develops a wind force of 270 lbs.
Skylight Installation Instructions This document provides instruction and guidelines for installation of both curb mount (CM) and self flashing (SF) unit skylights on flat, pitched (> or equal to 3/12
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationBall valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
More informationThe ACCU-LUBE Micro-Lubricating System for external and internal lubrication
E -000 Information on our company The ACCU-LUBE Micro-Lubricating System for external and internal lubrication the environmentally safe Micro-Lubricating System eliminating waste disposal Development:
More informationComputerized Electronic Univesal Testing Machine WDW-20Y
1 1. Functions and Features: 1.1 is high level computer controlled electronic UTM, dual space structure, tensile test executed at upper side of crosshead, compression 1.2 Main components is imported brand,
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More information2- and 3-port valves with flanged connections, PN 10
4 402 VVF32.. VXF32.. ACVATIX 2 and 3port valves with flanged connections, PN 10 From the largestroke valve line VVF32.. VXF32.. Performance valves for medium temperatures from 10 150 C Valve body of grey
More informationKunststoffverarbeitung GmbH & Co
Kunststoffverarbeitung GmbH & Co Established in 1946 Founders: Benno und Franz Weiss Aerea 22.500 m² Production area 11.000 m² Management Dietmar Weiss Dipl. Ing. (FH) Bruno Weiss Dipl. Kfm. Jürgen Weiss
More informationPLEXIGLAS SUNACTIVE GS. For a Better Feeling
PLEXIGLAS SUNACTIVE GS For a Better Feeling PLEXIGLAS SUNACTIVE GS For a Better Feeling A perfect tan and a feeling of wellbeing are two important sales factors for tanning beds. To enable you to convincingly
More informationFLEXIBLE SOLUTIONS FOR FLUIDS AND GASES
FLEXIBLE SOLUTIONS FOR FLUIDS AND GASES www.amnitec.nl AmniTec B.V., Rotterdam, is part of a group of companies called United Flexible with an annual turnover of $ 70 Million and 5 operating facilities
More informationEnvironmental Product Declaration
Environmental Product Declaration PVDF-System According to EN 15804 Circling and distribution of purified water in a pharmaceutical plant Georg Fischer Piping Systems Ltd. Ebnatstrasse 111 CH-8201 Schaffhausen
More informationUsing Portable Spot Air Conditioners in Industrial Applications
Using Portable Spot Air Conditioners in Industrial Applications Cooling People, Processes and Equipment In today s highly competitive manufacturing sector, companies are constantly looking for new ways
More informationSTAVAX SUPREME. Stainless tool steel
STAVAX SUPREME Stainless tool steel General Demands placed on plastic mould tooling are increasing. Such conditions require mould steels that possess a unique combination of toughness, corrosion resistance
More informationLEAD CRYSTAL. User Manual. Valve-regulated lead-crystal batteries Energy storage Cells
Engineering Production Sales LEAD CRYSTAL Valve-regulated lead-crystal batteries Energy storage Cells User Manual www.axcom-battery-technology.de info@.axcom-battery-technology.de Chapter 1: 1. Introduction
More informationSimmerring BA.../SL to DIN 3760 A/AS
Simmerring BA.../SL to DIN 3760 A/AS Simmerring BA.../SL to DIN 3760 A/AS Simmerring BAUX2, BAUSLX2, BAFUDX7, BAFUDSLX7, BA, BASL, BAU, BAUSL Product advantages Broad range of applications in every sector
More informationDéfumair XR. ventilation and cmv. fire grade - label CE. smoke-extraction fan extraction casing for kitchen at F400-120. advantages.
Défumair XR smoke-extraction fan extraction casing for kitchen at F400-120 Personalisation : - Phonic insulation version by insulated double-skin panels through 25 mm glass wool, class M1. advantages Originally
More informationPost graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy
Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy 1.0 Introduction India s growing energy needs mixed with world s order for reducing
More information063450 LI-POLYMER BATTERY PACKS. Specification. Type:063450 1000mAh. Prepared/Date Auditing/Date Approved/Date WANG MAR 16, 2006 LI MAR 16, 2006
063450 LI-POLYMER BATTERY PACKS Specification Type:063450 1000mAh Prepared/Date Auditing/Date Approved/Date WANG MAR 16, 2006 LI MAR 16, 2006 XIONG MAR 16, 2006 Sheet 1/5 1 Scope This product specification
More informationGPD Rubber Press Seals
GPD Rubber Press Seals Leading in in ideas SYSTEM-TECHNIK GPD Rubber Press Seals Design Available with a rubber thickness of 30 mm for sealing against non-pressing water and a rubber thickness of 60 mm
More informationBackflush filter R8-30W
Backflush filter R8-30W With internal pressure segment cleaning, rated pressure to 40 bar (580 psi) Connection sizes: DN 200 to DN 500, welded design 1. Features Powerful, fully automatic filtration _
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationheat treatment equipment & accessories
heat treatment equipment & accessories INDUSTRIAL FURNACES Dear Customer, ElectroHeat Sweden AB is an innovative company based in Gothenburg, Sweden, and has been operating since 1975. We manufacture industrial
More informationBuilding Owners Guide to a Duro-Last System!
Building Owners Guide to a Duro-Last System Table of Contents Section 1: Introduction to Duro-Last Roofing Systems Section 2: Benefits of a Duro-Last Roofing System Section 3: Comparing a Duro-Last Roof
More informationKWANG SING ENGINEERING PTE LTD
KWANG SING ENGINEERING PTE LTD 1. INTRODUCTION This report represents the soil investigation works at Aljunied Road / Geylang East Central. The objective of the soil investigation is to obtain soil parameters
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationrbital Fields of application Variants
Fields of application Based on more than 30 years experience of engineering and fabrication of Air and Flue Gas dampers, NOVAL makes available to its customers this welded design, in particular in the
More informationPS-SEAL PTFE based high performance seal
PS-SEAL PTFE based high performance seal Advancing the Science of Sealing Advancing the Science of Sealing Table of content PS-SEAL 3 PS-SEAL STANDARD Standard seal in stock 4 PS-SEAL NON-STANDARD Customized
More informationTECHICAL SPECIFICATION IP65 EMI EMC Gaskets
Pag. 1/5 TECHICAL SPECIFICATION IP65 EMI EMC Gaskets Description Market requirements permit us to offer different gaskets that cover the double function of watertight seals and electromagnetic interference
More informationVeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz. Quit
VeMet, Utrecht, NL «Solution in Wear Protection» 26.10.2011 Dipl.-Ing. Wolfgang Leichnitz Quit Theory and Practice of Wear Definition In materials science, wear is the erosion of material from a solid
More informationSECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront
PART 1 GENERAL 1.01 Work Included SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS System 402 Flush-Glazed Screw Spline Storefront A. Furnish and install aluminum architectural storefront system
More informationA E R Z E N E R M A S C H I N E N F A B R I K G M B H AERZEN POSITIVE DISPLACEMENT BLOWERS. for conveying of air and neutral gases for high vacuum
AERZEN POSITIVE DISPLACEMENT BLOWERS for conveying of air and neutral gases for high vacuum A E R Z E N E R M A S C H I N E N F A B R I K G M B H G1-090 01 EN 1000 6.2005 Customers benefit due to technical
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationRittal TopTherm fan-and-filter unit
Rittal TopTherm fan-and-filter unit System Climate Control More pressure. Higher air flow rates. 2 Assembly without tools Straightforward assembly, exchange and maintenance with no need for tools of any
More informationSERIE NEMESIS 9000 TM
Load cell, closed loop, linear force actuator, fixed workpiece position Flexible modular design Force configuration 250kgf/2.45kN 750kgf/7.35kN 3000kgf/29kN Introduction NEMESIS 9000 Series, represents
More informationINNOVATIONS. Economic Flat Roof Refurbishment with NOVOPROOF Sealing Systems. A Company of the SAARGUMMI Group
INNOVATIONS Economic Flat Roof Refurbishment with NOVOPROOF Sealing Systems A Company of the SAARGUMMI Group OUR SOLUTION TO REFURBISH ROOFS FOR LONG-TERM DURABILITY Quality and Experience from the Innovation
More informationDEMIRSAN. w w w. d e m i r s a n m e t a l. c o m. t r Page 1
DEMIRSAN The foundation of our company had laid as a lathe workshop by Mr. Bekir Demir, in Karabağlar, at 1972 that had continue to operate in this way for a long time.after that our General Manager Mr.
More informationBuilt-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5
Cl Sfb (27-9) Rn7 M2 December 2004 Built-up roofing solutions with rigid insulation boards on concrete decks for new-build and refurbishment E-a5 Fesco, Fesco S, Retrofit, Retrofit S, Fesco Fillet, PF,
More informationMaterials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
More informationTEMPERATURE MEASURING GALVANIC SEPARATORS CONVERTORS, PRESSURE MEASURING
DELIVERY PROGRAMME TEMPERATURE MEASURING - Resistance temperature sensors into a reservoir, - with a reservoir, with protection tube, with cable - Resistance temperature sensors Ex to zones 2, 1 - - and
More information