AC Drives and Soft Starters

AC Drives and Soft Starters Pricing Guide 8800PL970R0/4 04 Class 8800 Altivar 3 Altivar 6 Altistart 48 Altivar 7 E-Flex Altivar S-Flex Altistart Altistart 0 M-Flex PowerGard Altivar 3 CONTENTS Description............................................. Page AC Drives for Centrifugal Pumps and Fans (Variable Torque Applications) Altivar drives......................................... 3 Altivar 6 drives............................................ 4 S-Flex enclosed drives with keypad...................... 0 E-Flex enclosed drives................................... M-Flex enclosed drives................................... PowerGard Type CPD drives............................... 6 AC Drives for Conveyors, Mixers, Extruders and Material Handling (Constant Torque Applications) Altivar drives........................................... 35 Altivar 3 drives.......................................... 36 Altivar 3 drives........................................... 39 Altivar 7 drives........................................... 4 M-Flex enclosed drive controllers........................... PowerGard Type CPD.................................... 6 AC Soft Starter for Reduced Voltage Control (Variable Torque or Constant Torque Applications) Altistart 0 soft starter.................................... 47 Altistart soft starter...................................... 49 Enclosed Altistart soft starter.............................. 5 Altistart 48 soft starter...................................... 53 Enclosed Altistart 48 soft starter.............................. 54 Line Reactors and Motor Protection Output Filters.................. 64 Braking Resistors and ules................................ 65 Spare Parts Altivar 6/7 drives........................................ 70 Altistart 48 soft starter...................................... 83 Auxiliary Services........................................... 84

AC Drives and Soft Starters Altivar Drives ATVHU5N4 ATVW075N4 ATVHU30M3X with Type Conduit Kit ATVHD37N4 with Type Conduit Kit VW3A0 VW3A0 VW3A0 VW3A03 VW3A04R0 VW3A8 LonWorks Option Card VW3A 04 Schneider Electric All Rights Reserved 0/04 The Altivar drive is for use with three-phase asynchronous motors for variable torque pump and fan applications. Select the Altivar drive from Table using the motor nameplate voltage and full load ampere ratings. The Altivar drive includes 3 logic inputs, analog inputs, analog output, and relay outputs (with NO and NO/NC contacts). The Altivar drive includes an integrated 4 digit, 7 segment LED display with a 7 button keypad and includes an RJ45 bus port plus a four-screw terminal block for BACnet, bus, Metasys N, and Apogee P communication protocols. LonWorks is available in an option card. Table : AC Input Line Voltage 00/40 Vac -5%, +0% Three-Phase 380/480 Vac -5%, +0% Three-Phase Remote LCD Keypad Mounting Accessories a b c d e Altivar Selection and Pricing Three-Phase Motor Powera Continuous Output Current Not required if using VW3A0. Discount for this product is CP4C. Discount for this product is CPG. Discount for this product is PC4. Discount for this product is PC4B. IP 0b Open Style Product Enclosure Rating Type Conduit Kit Purchase ATV and Conduit Kit for Type Installation Type / IP54c HP kw Aa Catalog Number Catalog Number Catalog Number 0.75 4.6 ATVH075M3X 447.00 VW3A384d 45.00.5 7.5 ATVHU5M3X 50.00 VW3A384d 45.00 3. 0.6 ATVHUM3X 68.00 VW3A384d 45.00 4 3 3.7 ATVHU30M3X 700.00 VW3A385d 45.00 5 4 8.7 ATVHU40M3X 75.00 VW3A385d 45.00 7.5 5.5 4. ATVHU55M3X 85.00 VW3A386d 45.00 0 7.5 3 ATVHU75M3X 963.00 VW3A386d 45.00 5 46. ATVHDM3X 398.00 VW3A387d 45.00 0 5 6 ATVHD5M3X 805.00 VW3A387d 45.00 5 8.5 74.8 ATVHD8M3X 34.00 VW3A387d 45.00 30 88 ATVHDM3X 35.00 VW3A906d 65.00 40 30 7 ATVHD30M3X 403.00 VW3A908d 35.00 0.75. ATVH075N4 498.00 VW3A384d 45.00 ATVW075N4 67.00.5 3.7 ATVHU5N4 55.00 VW3A384d 45.00 ATVWU5N4 694.00 3. 5. ATVHUN4 605.00 VW3A384d 45.00 ATVWUN4 747.00 4 3 7. ATVHU30N4 675.00 VW3A385d 45.00 ATVWU30N4 79.00 5 4 9. ATVHU40N4 685.00 VW3A385d 45.00 ATVWU40N4 89.00 7.5 5.5 ATVHU55N4 795.00 VW3A385d 45.00 ATVWU55N4 070.00 0 7.5 6 ATVHU75N4 875.00 VW3A386d 45.00 ATVWU75N4 08.00 5.5 ATVHDN4 87.00 VW3A386d 45.00 ATVWDN4 456.00 0 5 30.5 ATVHD5N4 45.00 VW3A387d 45.00 ATVWD5N4 668.00 5 8.5 37 ATVHD8N4 856.00 VW3A387d 45.00 ATVWD8N4 9.00 30 43.5 ATVHDN4S 89.00 VW3A387d 45.00 30 43.5 ATVHDN4 856.00 VW3A906d 65.00 ATVWDN4 709.00 40 30 58.5 ATVHD30N4 309.00 VW3A906d 65.00 ATVWD30N4 304.00 50 37 79 ATVHD37N4 3479.00 VW3A907d 65.00 ATVWD37N4 363.00 60 45 94 ATVHD45N4 3998.00 VW3A907d 65.00 ATVWD45N4 4448.00 75 55 6 ATVHD55N4 4705.00 VW3A908d 35.00 ATVWD55N4 5038.00 00 75 60 ATVHD75N4 5743.00 VW3A908d 35.00 ATVWD75N4 65.00 UL File E6875, CSA 78406, Plenum rated per UL 508C for UL 995 installations. NOM, CE a These horsepower, wattage and continuous ampere ratings apply to the default switching frequency and maximum 40 C ambient. Refer to the installation manual for derating curves as a function of switching frequency, ambient temperature, and mounting conditions. b IP0 Altivar drives can be installed as UL Type with an optional conduit box by following the instructions in the Installation Manual. c For ATVW... drives with Class B EMC filter, add the letter C to the end of the standard catalog number and multiply by.3. d Discount for this product is PC4B. Table : Altivar Options and Accessories Description For Use on Drives Catalog Number User Interface Options Remote LCD Display Keypad 8 line, 4 characters per line, plain text, 8 keys, rotary wheel, 60 C IP54 rated Altivar, 3, 3 Altivar 6 & 7 VW3A0b 5.00 IP54 rated kit for remote mounting LCD keypad on enclosure door. VW3A0 VW3A0b 55.00 Clear plastic door for use with VW3A0 for IP65 rating and tamper resistant. VW3A0 VW3A03b 45.00 Female / Female right angle RJ45 adaptor, to connect cable and keypad.a VW3A0 VW3A05b 35.00 Remote LCD Keypad Mounting Cables Equipped with two RJ45 connectors meter length 3 meter length 5 meter length 0 meter length VW3A0 VW3A0 VW3A0 VW3A0 Altivar,, 3 3, 6, 7, & Altistart VW3A04R0c VW3A04R30c VW3A04R50c VW3A04R00c Multi-loader Use to copy configurations between like drives, PC Soft, or SoMove PC Software VW3A8e 350.00 Potentiometer Operator, mounting collar,.5 kilohm, watt potentiometer Altivar ATVPOT5Ke 69.00 Software SoMove Lite This software enables the user to configure, set, debug and organize maintenance task for the Altivar drive. It can also be used to customize the integrated display terminal menus. It can be used with a direct connection or a Bluetooth wireless connection. Free download at http://products.schneider-electric.us/products-services/products/ac-drives-and-soft-starts/ USB to RJ45 adaptor PCSoft Universal Bluetooth Interface Communication Option LonWorks Communication Card Option Mounting Kit DIN Rail Mounting Kit 35.00 35.00 35.00 35.00 Advantys OTB, Altistart For use in connecting to a PC with a USB port motor starters, Altivar series TCSMCNAM3M00P 5.00 including HMI, Altivar controller Download at PC software configuring, monitoring and trouble shooting Altivar drives. http://products.schneider- Requires one of two cables (noted below) to connect a PC to the RJ45 bus Altivar electric.us/products- port on the drive services/products/ac-drives-and- soft-starts/ USB/RS485 cable: equipped with USB connector and RJ45 connector Altivar & Altistart TCSMCNAM3M00Pc 5.00 RS 3-RS485 converter with SUB-D & RJ45 port, cable with two RJ45 connectors Altivar VW3A806b 75.00 Bluetooth connectivity to devices through serial RS-485, RJ45 bus port. For permanent installation, to be used during commissioning, maintenance and troubleshooting of equipment. Provides a four-screw terminal block for connection to LonWorks network. Install in place of standard control board that comes mounted in the Altivar drive. The I/O count is reduced to 3LI, AI and NO/NC relay For installation on 35 mm wide DIN rail CP4Be CPGc CP4D CP4Cb PC4d Discount Altivar,, 3, 6, 7, Altistart TCSWAAC3FBd 80.00 Altivar VW3Ae 375.00 Altivar H075M3X...UM3X Altivar H075N4...UN4 VW3A385e 375.00 3

AC Drives and Soft Starters Altivar 6 Drives Altivar 6 Single-Phase Drives In an application where it is necessary to use a 40 V single-phase input for a 3-phase motor, the drive must be derated; therefore, the power listed on the drive nameplate will be higher than the power rating on the motor nameplate. See page 64 for line reactor selection and pricing. Table 3: Input Line Voltage Altivar 6 Selection and Pricing With a 5% Line Reactor Motor Power Continuous Output Current Without a Line Reactor Motor Power Continuous Output Current HP kw A HP kw A Catalog Number with LCD Keypad List Price $ Catalog Number for ATV6 drive and Type conduit entry kit shipped as one line item. Field installation required (packaged as kit at warehouse). List Price $ Catalog Number with LED Keypad (Non-stocked) List Price $ 0.5 0.37 3 ATV6H075M3a 639.00 ATV6H075M3T 684.00 ATV6H075M3Za 544.00 0.75 4.8 ATV6HU5M3a 663.00 ATV6HU5M3T 708.00 ATV6HU5M3Za 568.00.5 8 ATV6HUM3a 764.00 ATV6HUM3T 809.00 ATV6HUM3Za 669.00 3. ATV6HU30M3a 95.00 ATV6HU30M3T 970.00 ATV6HU30M3Za 830.00 3 3.7 ATV6HU40M3a 035.00 ATV6HU40M3T 080.00 ATV6HU40M3Za 940.00 08/ 40 Vac Single 5 7.5 4 5.5 7.5 7.5 5 4 7.5 ATV6HU55M3a ATV6HU75M3a 9.00 586.00 ATV6HU55M3T ATV6HU75M3T 337.00 63.00 ATV6HU55M3Za ATV6HU75M3Za 97.00 49.00 Phase 0 7.5 33 7.5 5.5 7.5 ATV6HD5M3Xabc 55.00 ATV6HD5M3XTbc 570.00 ATV6HD5M3XZabc 430.00 0 7.5 33 ATV6HD8M3Xabc 943.00 ATV6HD8M3XTbc 3008.00 5 54 ATV6HDM3Xabc 3586.00 ATV6HDM3XTbc 365.00 0 5 66 5 54 ATV6HD30M3Xabc 4599.00 ATV6HD30M3XTbc 4684.00 5 8 75 0 5 66 ATV6HD37M3Xabc 534.00 ATV6HD37M3XTbc 547.00 30 88 5 8 75 ATV6HD45M3Xabc 636.00 ATV6HD45M3XTbc 64.00 a Option to have product treated for increased protection for dusty and corrosive environments. This product is not stocked. On 0.5 hp to 5 hp at 30 Vac single phase, add S337 to the end of the catalog number. On 7.5 hp to 5 hp at 30 Vac single phase, add 337 to the end of the catalog number. In both cases multiply price by. to obtain the new price. With this option, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils. b Product does not contain an EMC filter. c Product contains an internal DC choke inductance is 3%. 4 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drives and Soft Starters Altivar 6 Drives Altivar 6 Three-Phase Drives Refer to document SB869800 for short circuit current ratings and branch circuit protection selection. Table 4: Input Line Voltage 08/40 Vac Three Phase 400/480 Vac Three Phase Altivar 6 Selection and Pricing Variable Torque Three-Phase Motor Power Continuous Output Current HP kw A Catalog Number with LCD Keypad (Stocked)f Catalog Number to have ATV6 and Type conduit \entry kit shipped as one line item. Field installation required (Packaged as kit at warehouse). a Option to have product treated for increased protection for dusty and corrosive environments. This product is not stocked. On hp to 0 hp at 30 Vac 3 phase and up to 00 hp at 460 V, add S337 to the end of the catalog number. On 5 hp to 60 hp at 30 Vac 3 phase, add 337 to the end of the catalog number. In both cases multiply price by. to obtain new price. With this option, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils. This option is standard on 55 kw/75 hp @ 30 Vac 3 phase and higher and 90 kw/5 hp @ 460 Vac and higher. b Product does not contain an EMC filter. c Product ships with a DC choke that must be field mounted inductance 3%. A 5% line reactor may be purchased and installed in place of the DC choke. Add D to the end of the catalog number to receive just the AC drive and multiply the listed price by 0.96 to obtain new price. d These products can be ordered with LonWorks or BACnet communication option card shipped as one line item. Field installation required. Add LW to the end of the part number to receive a LonWorks option card. Add $550 to the price. Add BN to the end of the part number to receive a BACnet option card. Add $5 to the price. e These products do not contain a dynamic braking transistor. A separate transistor must be added for applications requiring dynamic braking. f When ordering replacements for Square D brand E-Flex, MCC and M-Flex enclosed drive controllers containing the Altivar 6 drive, identify the replacement catalog number by referring to the applicable instruction manual, the side nameplate on power converter, or using the graphic keypad (menu. identification). g Product contains an internal DC choke inductance is 3%. Catalog Number with LED Keypad (Non-stocked) 0.75 4.8 ATV6H075M3ad 639.00 ATV6H075M3Td 684.00 ATV6H075M3Z 544.00.5 8 ATV6HU5M3ad 663.00 ATV6HU5M3Td 708.00 ATV6HU5M3Z 568.00 3. ATV6HUM3ad 764.00 ATV6HUM3Td 809.00 ATV6HUM3Z 669.00 4 3 3.7 ATV6HU30M3ad 95.00 ATV6HU30M3Td 970.00 ATV6HU30M3Z 830.00 5 4 7.5 ATV6HU40M3ad 035.00 ATV6HU40M3Td 080.00 ATV6HU40M3Z 940.00 7.5 5.5 7.5 ATV6HU55M3ad 9.00 ATV6HU55M3Td 337.00 ATV6HU55M3Z 97.00 0 7.5 33 ATV6HU75M3ad 586.00 ATV6HU75M3Td 63.00 ATV6HU75M3Z 49.00 5 54 ATV6HDM3Xabdg 0.00 ATV6HDM3XTbdg 056.00 ATV6HDM3XZbg 96.00 0 5 66 ATV6HD5M3Xabdg 55.00 ATV6HD5M3XTbdg 570.00 ATV6HD5M3XZbg 430.00 5 8 75 ATV6HD8M3Xabdg 943.00 ATV6HD8M3XTbdg 3008.00 30 88 ATV6HDM3Xabdg 3586.00 ATV6HDM3XTbdg 365.00 40 30 0 ATV6HD30M3Xabdg 4599.00 ATV6HD30M3XTbdg 4684.00 50 37 44 ATV6HD37M3Xabdg 534.00 ATV6HD37M3XTbdg 547.00 60 45 76 ATV6HD45M3Xabdg 636.00 ATV6HD45M3XTbdg 64.00 75 55 ATV6HD55M3Xbcd 7806.00 ATV6HD55M3XTbd 866.00 00 75 85 ATV6HD75M3Xbcd 9379.00 ATV6HD75M3XTbd 9839.00 5 90 359 ATV6HD90M3Xbcd 954.00 ATV6HD90M3XTbd 507.00 0.75.3 ATV6H075N4ad 754.00 ATV6H075N4Td 799.00 ATV6H075N4Z 659.00.5 4. ATV6HU5N4ad 857.00 ATV6HU5N4Td 90.00 ATV6HU5N4Z 76.00 3. 5.8 ATV6HUN4ad 999.00 ATV6HUN4Td 044.00 ATV6HUN4Z 904.00 4 3 7.8 ATV6HU30N4ad 5.00 ATV6HU30N4Td 70.00 ATV6HU30N4Z 030.00 5 4 0.5 ATV6HU40N4ad 58.00 ATV6HU40N4Td 03.00 ATV6HU40N4Z 063.00 7.5 5.5 4.3 ATV6HU55N4ad 99.00 ATV6HU55N4Td 344.00 ATV6HU55N4Z 04.00 0 7.5 7.6 ATV6HU75N4ad 578.00 ATV6HU75N4Td 63.00 ATV6HU75N4Z 483.00 5 7.7 ATV6HDN4ad 868.00 ATV6HDN4Td 93.00 ATV6HDN4Z 773.00 0 5 33 ATV6HD5N4ad 3.00 ATV6HD5N4Td 367.00 ATV6HD5N4Z 7.00 5 8 4 ATV6HD8N4adg 795.00 ATV6HD8N4Tdg 840.00 ATV6HD8N4Z 700.00 30 48 ATV6HDN4adg 304.00 ATV6HDN4Tdg 307.00 ATV6HDN4Z 947.00 40 30 66 ATV6HD30N4adg 3744.00 ATV6HD30N4Tdg 3809.00 ATV6HD30N4Z 3649.00 50 37 79 ATV6HD37N4adg 4403.00 ATV6HD37N4Tdg 4468.00 ATV6HD37N4Z 4308.00 60 45 94 ATV6HD45N4adg 558.00 ATV6HD45N4Tdg 5563.00 ATV6HD45N4Z 5433.00 75 55 6 ATV6HD55N4adg 6365.00 ATV6HD55N4Tdg 6500.00 ATV6HD55N4Z 670.00 00 75 60 ATV6HD75N4adg 767.00 ATV6HD75N4Tdg 740.00 ATV6HD75N4Z 77.00 5 90 79 ATV6HD90N4cd 7988.00 ATV6HD90N4Td 8448.00 50 0 5 ATV6HCN4cd 005.00 ATV6HCN4Td 060.00 00 30 59 ATV6HC3N4cd 60.00 ATV6HC3N4Td 9.00 50 60 34 ATV6HC6N4cd 36.00 ATV6HC6N4Td 3758.00 350 0 47 ATV6HCN4cd 567.00 ATV6HCN4Td 633.00 400 50 48 ATV6HC5N4cde 8946.00 ATV6HC5N4Td 9550.00 500 35 66 ATV6HC3N4ce 794.00 600 400 759 ATV6HC40N4ce 3840.00 700 500 94 ATV6HC50N4ce 5308.00 900 630 88 ATV6HC63N4ce 767.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 5

AC Drives and Soft Starters Altivar 6 Drives Altivar 6 Selection and Pricing (continued) Variable Torque Three-Phase Motor Power Continuous Output Current Input Line Voltage HP kw A a b c d 500/600 Vac Three Phase 575/690 Vac Three Phase Catalog Number with LCD Keypad (Stocked) 3. 3.9 ATV6HUS6Xd 889.00 4 3 5.8 ATV6HU30S6Xd 989.00 5 4 6. ATV6HU40S6Xd 099.00 7.5 5.5 9 ATV6HU55S6Xd 380.00 0 7.5 ATV6HU75S6Xd 799.00 5 5 7 ATV6HD5Ya 4790.00 0 8.5 ATV6HD8Ya 4790.00 5 7 ATV6HDYa 4790.00 30 30 3 ATV6HD30Ya 5780.00 40 37 4 ATV6HD37Ya 6999.00 50 45 5 ATV6HD45Ya 8579.00 60 55 6 ATV6HD55Ya 0379.00 75 75 77 ATV6HD75Ya 99.00 00 90 99 ATV6HD90Ya 4399.00 5 0 5 ATV6HCYab 897.00 50 3 50 ATV6HC3Yab 480.00 60 80 ATV6HC6Yab 390.00 00 00 0 ATV6HC0Yab 705.00 50 50 90 ATV6HC5Yabc 344.00 350 35 355 ATV6HC3Yabc 4343.00 450 400 40 ATV6HC40Yabc 5600.00 550 500 543 ATV6HC50Yabc 7508.00 700 630 675 ATV6HC63Yabc 9488.00 800 800 840 ATV6HC80Yabc 4068.00 Conformal coating is standard. An AC 5% line reactor which must be ordered separately is mandatory. These products do not contain a dynamic braking transistor. A separate transistor must be added for applications requiring dynamic braking. Product does not contain EMC filter. All boards are conformal coated. Table 5: 400/480 Vac Three-Phase UL Type /IP54 Altivar 6 UL Type / IP54 Selection and Pricing Three-Phase Motor Power Continuous Output Current Horsepower kw A Catalog Number 0.75.3 ATV6W075N4U 943.00.5 4. ATV6WU5N4U 07.00 3. 5. ATV6WUN4U 49.00 3 7. ATV6WU30N4U 406.00 5 4 9. ATV6WU40N4U 448.00 7.5 5.5 ATV6WU55N4U 64.00 0 7.5 6 ATV6WU75N4U 97.00 5.5 ATV6WDN4U 335.00 0 5 30.5 ATV6WD5N4U 903.00 5 8.5 37 ATV6WD8N4U 3493.00 30 43.5 ATV6WDN4U 3803.00 40 30 58.5 ATV6WD30N4U 4680.00 50 37 7.5 ATV6WD37N4U 5504.00 60 45 85 ATV6WD45N4U 69.00 75 55 03 ATV6WD55N4U 7956.00 00 75 37 ATV6WD75N4U 9084.00 5 90 63 ATV6WD90N4U 9986.00 6 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drives and Soft Starters Altivar 6 and Altivar 7 Drives 3 4 LCD Keypad Mounting Kits Option Card Assembly I/O Option Card Communication Option Card Incremental Encoder Interface Option Card Table 6: Options Field Installed Description For Use on Drives Catalog No. LCD graphic keypad: IP54 rating VW3A0 5.00 Remote mounting kit: includes bezel and mounting hardware VW3A0 55.00 Door for use with remote mount kit for IP65 rating VW3A03 45.00 meter VW3A04R0 35.00 any ATV6 Operator Cable for remote mounting LCD graphic 3 meters any ATV7 VW3A04R30 35.00 Interface keypad RJ-45 connector on each end 5 meters VW3A04R50 35.00 0 meters VW3A04R00 45.00 RJ-45 female female adaptor to connect LCD keypad and cable. Not required if using VW3A0. VW3A05 35.00 Operator, mounting collar,.5 kilohm, watt potentiometer Altivar 6 ATVPOT5K 69.00 Software SoMove This software enables the user to configure, set, debug and organize maintenance task for the Altivar drive. It can also be used to customize the integrated display terminal menus. It can be used with a direct connection or a Bluetooth wireless connection. Free download at http://products.schneider-electric.us/products-services/products/ac-drives-and-soft-starts/ USB to RJ45 adaptor Universal Bluetooth Interface I/O Adaptor I/O Extension Option Cards CANopen Adapter CANopen Connector Incremental Encoder Interface Option Cards For use in connecting to a PC with a USB port Bluetooth connectivity to devices through serial RS-485, RJ45 bus port. For permanent installation, to be used during commissioning, maintenance and troubleshooting of equipment. 5 Vac logic input adaptor adapts 7 logic inputs for use with user supplied 5 Vac signals Basic I/O option card 4 logic inputs, logic outputs, Form C relay output, an input for PTC motor probes, a 4 Vdc output, and a 0 Vdc output Extended I/O option card contains all the I/O on the Basic I/O option card plus analog inputs, analog outputs, pulse input This adaptor connects to the RJ-45 port and provides a 9 pin male SUB D connector conforming to the CANopen standard (CIA DRP 303 ) 9-pin female SUB D with line terminator (can be disabled). 80º cable outlet CAN H, CAN L, CAN GND connection Advantys OTB, Altistart motor starters, Altivar series including HMI, Altivar controller Altivar,, 3, 6, 7, and Altistart any ATV6 any ATV7 any ATV6 any ATV7 any ATV6 any ATV7 any ATV6 any ATV7 TCSMCNAM3M00P 5.00 TCSWAAC3FBd 80.00 VW3A30 95.00 VW3A30 65.00 VW3A30 95.00 VW3CANA7 45.00 VW3CANKCDF80T 45.00 with RS-4 outputs, 5 Vdc VW3A340 85.00 with RS-4 outputs, 5 Vdc VW3A340 85.00 with open collector outputs, Vdc VW3A3403 85.00 with open collector outputs, 5 Vdc VW3A3404 85.00 with push pull outputs, Vdc VW3A3405 85.00 any ATV7 with push pull outputs, 5 Vdc VW3A3406 85.00 with push pull outputs, 4 Vdc VW3A3407 85.00 Resolver VW3A3408a 85.00 Universal with SinCos, SinCos Hiperface, SinCos EnDat or SSI output VW3A3409a 85.00 Incremental with RS4 outputs and encoder emulation VW3A34a 85.00 bus / Uni-Telway card VW3A3303 5.00 bus TCP/IP daisy chain VW3A330D 75.00 Interbus S card VW3A3304 550.00 Profibus DP card any ATV6 any ATV7 VW3A3307 550.00 Profibus DPv card VW3A3307S37 550.00 Communication Option Cards DeviceNet card VW3A3309 5.00 Ethernet/IP card VW3A336 75.00 LonWorks card VW3A33 550.00 Metasys N card with removable 4 position screw connector VW3A338 5.00 any ATV6 Apogee FLN P card VW3A334 5.00 BACnet card with removable 4 position screw connector VW3A339 5.00 IMC Option Card ATV IMC drive controller cardc VW3A35S0d 755.00 Controller Inside Option Card Water Solutions Control Card Simple Loader a b c d Programmable option card, conforms with IEC63 3 programming standard. (Software for this option card is available after completing training class offered by Schneider Electric Services.) This option card contains a variety of pre-programmed functions and features to manage multi pump installations. Using RJ45 port connections, the configurations of a drive can be downloaded then uploaded to compatible drive. any ATV6 any ATV7 any ATV6 any ATV7 VW3A350b 550.00 VW3A3503b 650.00 ATV3, ATV6, and ATV7 VW3A80 75.00 For use with the ATV7H...383 drive ONLY. The drive cannot support the VW3A3503 water solutions card and the VW3A350 controller inside option card simultaneously. SoMachine is required to use this product. Discount for this product is PC4. 04 Schneider Electric All Rights Reserved 0/04 CP4C PC4d Discount 7

AC Drives and Soft Starters Altivar 6 and Altivar 7 Drives Table 6: Fan Kit Mounting Plate Kit Options Field Installed (continued) Description For Use on Drives Fan Kit Catalog No. Installation of the fan kit enables the drive to operate in higher ambient temperatures. The fan mounts on the drive. Consult the product catalog for more information. Description Kit includes: Mechanical adaptors required for mounting an Altivar 6/7 drive in the place of an Altivar 58 or Altivar 58F drive using the same holes. ATV6/7HD8M3X...HDM3X, ATV6/7HDN4 VW3A9404 35.00 ATV6/7HD30N4...HD37N4 VW3A9405 45.00 ATV6/7HD30M3X...HD45M3X VW3A9406 65.00 ATV6/7HD45N4...HD75N4 VW3A9407 95.00 ATV6: Options and Accessories Variable Torque Applications ATV58 Drive Replaced by Mounting Plate Catalog No. Single-phase supply voltage: 00 40 V 50/60 Hz ATV58HU09MZU ATV6H075M3 VW3A930 83.00 ATV58HU8MZU ATV6HU5M3 VW3A930 83.00 ATV58HU9MZU ATV6HUM3 VW3A9303 83.00 ATV58HU4MZU ATV6HU30M3 VW3A9303 83.00 ATV58HU7MZU ATV6HU40M3 VW3A9304 93.00 ATV58HU90MZU ATV6HU55M3 VW3A9306 33.00 ATV58HDMZU ATV6HU75M3 VW3A9307 33.00 Three-phase supply voltage: 00 40 V 50/60 Hz ATV58HU9MZU ATV6HU5M3 VW3A930 83.00 ATV58HU4MZU ATV6HUM3 VW3A9303 83.00 ATV58HU54MZU ATV6HU30M3 VW3A9304 93.00 ATV58HU7MZU ATV6HU40M3 VW3A9304 93.00 ATV58HU90MZU ATV6HU55M3 VW3A9306 33.00 ATV58HDMZU ATV6HU75M3 VW3A9307 33.00 ATV58HD6MXZU ATV6HDM3X VW3A9309 70.00 ATV58HD6MXZU ATV6HD5M3X VW3A9309 70.00 ATV58HD3MXZU ATV6HD8M3X VW3A930 70.00 ATV58HD8MXZU ATV6HDM3X VW3A93 337.00 ATV58HD33MXZU ATV6HD30M3X VW3A93 337.00 ATV58HD46MXZU ATV6HD37M3X VW3A93 337.00 Three-phase supply voltage: 380 480 V 50/60 Hz ATV58HU8N4ZU ATV6H075N4 VW3A930 83.00 ATV58HU9N4ZU ATV6HU5N4 VW3A930 83.00 ATV58HU4N4ZU ATV6HUN4 VW3A930 83.00 ATV58HU54N4XZU ATV6HU40N4 VW3A9304 93.00 ATV58HU7N4XZU ATV6HU55N4 VW3A9305 93.00 ATV58HU90N4XZU ATV6HU75N4 VW3A9305 93.00 ATV58HDN4XZU ATV6HDN4 VW3A9307 33.00 ATV58HD6N4XZU ATV6HD5N4 not available ATV58HD3N4XZU ATV6HD8N4 VW3A9308 38.00 ATV58HD8N4XZU ATV6HDN4 VW3A930 70.00 ATV58HD33N4XZU ATV6HD30N4 VW3A930 70.00 ATV58HD46N4XZU ATV6HD37N4 VW3A930 70.00 ATV58HD54N4XZU ATV6HD45N4 VW3A93 337.00 ATV58HD64N4XZU ATV6HD55N4 VW3A93 337.00 ATV58HD79N4XZU ATV6HD75N4 VW3A93 337.00 ATV7: Options and Accessories Constant Torque Applications ATV58 Drive Replaced by Mounting Plate Catalog No. Single-phase supply voltage: 00 40 V 50/60 Hz ATV58HU09MZU ATV7H075M3 VW3A930 83.00 ATV58HU8MZU ATV7HU5M3 VW3A930 83.00 ATV58HU9MZU ATV7HUM3 VW3A9303 83.00 ATV58HU4MZU ATV7HU30M3 VW3A9303 83.00 ATV58HU7MZU ATV7HU40M3 VW3A9304 93.00 ATV58HU90MZU ATV7HU55M3 VW3A9306 33.00 ATV58HDMZU ATV7HU75M3 VW3A9307 33.00 Three-phase supply voltage: 00 40 V 50/60 Hz ATV58HU9MZU ATV7HU5M3 VW3A930 83.00 ATV58HU4MZU ATV7HUM3 VW3A9303 83.00 ATV58HU54MZU ATV7HU30M3 VW3A9304 93.00 ATV58HU7MZU ATV7HU40M3 VW3A9304 93.00 ATV58HU90MZU ATV7HU55M3 VW3A9306 33.00 ATV58HDMZU ATV7HU75M3 VW3A9307 33.00 ATV58HD6MXZU ATV7HDM3X VW3A9309 70.00 ATV58HD3MXZU ATV7HD5M3X VW3A9309 70.00 ATV58HD8MXZU ATV7HD8M3X VW3A93 337.00 ATV58HD33MXZU ATV7HDM3X VW3A93 337.00 ATV58HD46MXZU ATV7HD30M3X VW3A93 337.00 Three-phase supply voltage: 380 480 V 50/60 Hz ATV58HU8N4ZU ATV7H075N4 VW3A930 83.00 ATV58HU9N4ZU ATV7HU5N4 VW3A930 83.00 ATV58HU4N4ZU ATV7HUN4 VW3A930 83.00 ATV58HU54N4ZU ATV7HU30N4 VW3A9304 93.00 ATV58HU7N4ZU ATV7HU40N4 VW3A9304 93.00 ATV58HU90N4ZU ATV7HU55N4 VW3A9305 93.00 ATV58HDN4ZU ATV7HU75N4 VW3A9306 33.00 ATV58HD6N4ZU ATV7HDN4 VW3A9307 33.00 ATV58HD3N4ZU ATV7HD5N4 VW3A9308 38.00 ATV58HD8N4ZU ATV7HD8N4 VW3A9309 70.00 ATV58HD33N4ZU ATV7HDN4 VW3A930 70.00 ATV58HD46N4ZU ATV7HD30N4 VW3A930 70.00 ATV58HD54N4ZU ATV7HD37N4 VW3A93 337.00 ATV58HD64N4ZU ATV7HD45N4 VW3A93 337.00 ATV58HD79N4ZU ATV7HD55N4 VW3A93 337.00 8 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drives and Soft Starters Altivar 6 and Altivar 7 Drives 3 3 6 5 Flange Kit VW3A9506 4 Table 6: Flange Kit Type Conduit Kit Profibus Option Card Cover a Options Field Installed (continued) Description For Use on Drives Catalog No. Kit includes: a metal frame, seals, mounting hardware, and a bracket to mount the fan kit so the fan can be accessed from the front of the drive template. Kit used to mount the heatsink of the drive outside of an enclosure. Kit includes: a metal box with conduit knockouts. The kit provides conduit landing when wall mounting the drive. Type cover for Profibus Option Card The symbol indicates the part of the number that varies with controller size or rating. ATV6/7H037M3...HU5M3 ATV6/7H075N4...HUN4 VW3A950 55.00 ATV6/7HUM3...HU40M3 ATV6/7HU30N4...HU40N4 VW3A950 79.00 ATV6/7HU55M3 ATV6/7HU55N4, HU75N4 VW3A9503 35.00 ATV6/7HU75M3 ATV6/7HDN4, ATV6/7...S6X VW3A9504 358.00 ATV6/7HDM3X..HD5M3X ATV6/7HD5N4, HD8N4 VW3A9505 49.00 ATV6/7HD8M3X..HDM3X ATV6/7HDN4, ATV6/7HU30Y...HD30Y VW3A9506 438.00 ATV6/7HD30N4, HD37N4 VW3A9507 469.00 ATV6/7HD30M3X..HD45M3X VW3A9508 469.00 ATV6/7HD45N4...HD75N4, ATV6/7HD37Y...HD90Y VW3A9509 477.00 ATV6HD55M3X...HD75M3X ATV6HD90N4...HCN4 VW3A950 500.00 ATV7HD55M3X, ATV7HD90N4 ATV6HD90M3X, ATV6HC3N4 VW3A95 667.00 ATV7HD75M3X, ATV7HCN4 ATV6HC6N4, ATV6HC0Y, ATV6/7HCY...HC6Y, ATV7HC3N4 VW3A95 053.00 ATV6HCN4, ATV7HC6N4 VW3A953 053.00 ATV6HC5N4 HC3N4 ATV6HC40Y ATV6/7HC5Y, HC3Y VW3A954 053.00 ATV7HC0N4...HC8N4 ATV7HC0Y ATV6HC5N4 HC3N4 with VW3A70 braking transistor ATV6HC40Y ATV6/7HC5Y, HC3Y ATV7HC0N4...HC8N4 with VW3A70 braking transistor ATV7HC0Y VW3A955 06.00 ATV6/7H037M3...HU5M3 ATV6/7H075N4...HUN4 VW3A90 45.00 ATV6/7HUM3...HU40M3 ATV6/7HU30N4...HU40N4 VW3A90 45.00 ATV6/7HU55M3 ATV6/7HU55N4, HU75N4 VW3A903 45.00 ATV6/7HU75M3 ATV6/7HDN4, ATV6/7...S6X VW3A904 45.00 ATV6/7HDM3X..HD5M3X ATV6/7HD5N4, HD8N4 VW3A905 45.00 ATV6/7HD8M3X..HDM3X ATV6/7HDN4 VW3A906 65.00 ATV6/7HU30Y...HD30Y ATV6/7HD30N4, HD37N4 VW3A907 65.00 ATV6/7HD30M3X..HD45M3X VW3A97 85.00 ATV6/7HD45N4..HD75N4 ATV6/7HD37Y...HD90Y VW3A908 35.00 ATV6HD55M3X...HD75M3X ATV6HD90N4...HCN4 VW3A909 460.00 ATV7HD55M3X, ATV7HD90N4, ATV6HCN4 ATV6HD90M3X, ATV6HC3N4 ATV7HD75M3X, ATV7HCN4 VW3A90 553.00 ATV6HC6N4, ATV7HC3N4 ATV6/7HCY...HC6Y VW3A9 573.00 ATV6HC0Y ATV6HCN4, ATV7HC6N4 VW3A9 588.00 ATV6HC5N4...HC3N4 ATV7HC0N4...HC8N4 ATV7HC0Y VW3A93 604.00 ATV6/7HC5Y, HC3Y ATV6HC40Y ATV6HC5N4...HC3N4 with VW3A70 braking transistor ATV7HC0N4...HC8N4 with VW3A70 braking transistor ATV7HC0Y VW3A94 604.00 ATV6/7HC5Y, HC3Y ATV6HC40Y 30 V Drive controllers 480 V Drive controllers ATV6H a ATV7H a ATV6H a ATV7H a 075M3 037M3 075N4 075N4 U5M3 075M3 U5N4 U5N4 VW3A90PF 0.00 U5M3 UN4 UN4 UM3 UM3 U30N4 U30N4 U30M3 U30M3 U40N4 U40N4 VW3A99PF 0.00 U40M3 U40M3 U55M3 U55M3 U55N4 U55N4 U75N4 U75N4 VW3A903PF 04.00 U75M3 U75M3 DN4 DN4 VW3A904PF 07.00 DM3X DM3X D5N4 D5N4 D5M3X D5M3X D8N4 D8N4 VW3A905PF.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 9

AC Drives and Soft Starters S-Flex Enclosed Drive Controllers Variable Torque AC Drive 08 V, 30 V, and 460 V Ratings S-Flex Enclosed Drive Controller Type Rated +4 to +40 F (-0 to +40 C) AFC AFC Table 7: a b Input Line Voltage 08 Vac Three-phase 30 Vac Three-phase 460 Vac Three-phase S-Flex Enclosed Drive Controller Selection and Pricing HP kw Output Current A Catalog Number Standard Product List Without Bypass MOD W Price $a Disc Switch MOD A07 Price $b Options Line Contactor MOD B07 Price $b.5% AC Line Reactor MOD X07 List Price $ 0.75 4.8 SFDCGY 7.00 90.00 338.00 88.00 8.00.5 7.8 SFDDGY 338.00 983.00 459.00 404.00 36.00 3. SFDEGY 67.00 88.00 763.00 697.00 57.00 5 4 7.5 SFDFGY 768.00 99.00 97.00 855.00 3.00 7.5 5.5 5.3 SFDGGY 983.00 457.00 6.00 08.00 48.00 0 7.5 3. SFDHGY 97.00 64.00 395.00 305.00 48.00 5 48.3 SFDJGY 540.00 866.00 769.00 665.00 35.00 0 5 6. SFDKGY 306.00 8.00 3386.00 359.00 48.00 5 8.5 78. SFDLGY 386.00 836.00 40.00 405.00 499.00 30 9 SFDMGY 548.00 3855.00 57.00 5507.00 499.00 40 30 0 SFDNGY 60.00 446.00 6555.00 6309.00 566.00 0.75 4. SFDCG3Y 7.00 90.00 338.00 88.00 8.00.5 6.8 SFDDG3Y 338.00 983.00 459.00 404.00 36.00 3. 9.6 SFDEG3Y 67.00 88.00 763.00 697.00 36.00 5 4 5. SFDFG3Y 768.00 99.00 97.00 855.00 69.00 7.5 5.5 SFDGG3Y 983.00 457.00 6.00 08.00 3.00 0 7.5 8 SFDHG3Y 97.00 64.00 395.00 305.00 48.00 5 4 SFDJG3Y 540.00 866.00 769.00 665.00 35.00 0 5 54 SFDKG3Y 306.00 8.00 3386.00 359.00 46.00 5 8.5 68 SFDLG3Y 386.00 836.00 40.00 405.00 469.00 30 80 SFDMG3Y 548.00 3855.00 57.00 5507.00 499.00 40 30 04 SFDNG3Y 60.00 446.00 6555.00 6309.00 566.00 0.75. SFDCG4Y 30.00 963.00 49.00 375.00 09.00.5 3.4 SFDDG4Y 375.00 00.00 499.00 443.00 8.00 3. 4.8 SFDEG4Y 50.00 03.00 636.00 575.00 36.00 5 4 7.6 SFDFG4Y 606.00 80.00 75.00 685.00 36.00 7.5 5.5 SFDGG4Y 674.00 30.00 86.00 757.00 57.00 0 7.5 4 SFDHG4Y 873.00 376.00 04.00 965.00 69.00 5 SFDJG4Y 0.00 68.00 40.00 3.00 3.00 0 5 7 SFDKG4Y 744.00 05.00 99.00 879.00 48.00 5 8.5 34 SFDLG4Y 363.00 397.00 3558.00 344.00 48.00 30 40 SFDMG4Y 3734.00 743.00 407.00 398.00 35.00 40 30 5 SFDNG4Y 4339.00 387.00 473.00 4553.00 35.00 50 37 65 SFDPG4Y 543.00 3967.00 590.00 5680.00 46.00 60 45 77 SFDQG4Y 6660.00 489.00 76.00 6988.00 499.00 75 55 96 SFDRG4Y 79.00 588.00 8636.00 83.00 566.00 00 75 4 SFDSG4Y 9547.00 703.00 0409.00 008.00 566.00 When ordering a unit without bypass, insert a W in place of the Y in the Catalog Number. Options A07 Disconnect Switch and B07 Line Contactor are available only when a full voltage bypass standard Y product is selected. Options A07 and B07 are mutually exclusive. M Power Circuit W M Power Circuit Y Table 8: Miscellaneous Optionsa Description Option Number BACnet Factory Set Up A06 55.00 LonWorks Communication Card B06 394.00 Metasys N Factory Set Up C06 55.00 Apogee FLN P Factory Set Up D06 55.00 LCD Text Keypad D07 50.00 Seismic Qualification S07 6.00 a b Note: Miscellaneous Options A06, B06, C06, and D06 are mutually exclusive. Add Misc. Option number to S-Flex catalog number when ordering communications factory installed. For bus control, see the Instruction Manual. See the Instruction Bulletin for set up instructions. All S-Flex Enclosed Drives are supplied with: Altivar power converter Square D circuit breaker disconnect (Power Fuses for 460 V version only) UL 508C coordinated short circuit rating for 00,000 A Adjustable Frequency Controller-Off-Bypass selector switch Local/Remote configurable on controller Power On red LED Bypass Run green LED Fire/Freezestat interlock for Adjustable Frequency Drive and Bypass mode Table 9: Accessories Description Catalog Number Altivar PCSoft Test and Commissioning Software. For use with Microsoft Windows 95, 98, NT, XP, and Vista operating systems for PCs only. VW3A04c N/C (Cable not included.) Download from www.schneider-electric.us. PC Cable for Test and Commissioning Software Includes 3-meter (9.8 ft.) cable, VW3A806 75.00 RS-485/RS-3C adaptor, and connectors USB to RJ45 Adaptor Kit For use in connecting to a PC with a USB port TCSMCNAM3M00P 5.00 EZ-M Mounting Channel, 7 in. length EZM7MC 4.00 c Can be downloaded from the internet at http://products.schneiderelectric.us/products-services/products/ac-drives-and-soft-starts/. Form C Adjustable Frequency Controller fault auxiliary contact bus RJ-45 communication port Smoke Purge Function Bypass Run Auxiliary Contact Drive Run Auxiliary Contact Full Voltage Bypass Power Circuit with overload relay 0 Vac fused control power transformer 0 04 Schneider Electric All Rights Reserved CP4D Discount 0/04

AC Drives and Soft Starters E-Flex Enclosed Drive Controllers Class 8839 Variable Torque AC Drive 08, 30 V, and 460 V Ratings Type Drive Controller Rated -0 to 40 C Type 3R Drive Controller Rated -0 to 50 C AFC M Power Circuit W AFC M Power Circuit Y Output Amperes HP 08 V 30 V 460 V 4.6 4.. 7.5 6.8 3.4 3 0.6 9.6 4.8 5 6.7 5. 7.6 7.5 4. 0 30.8 8 4 5 46. 4 0 59.4 54 7 5 74.8 68 34 30 88 80 40 40 4 04 5 50 43 30 65 60 77 75 96 00 4 Table 0: E-Flex Selection and Pricing Class Type ifications Control Lights Misc 8839 EFD V A07 3 4 5 6 7 8 9 Note: Standard packages are rated 00 k AIC HP Code G= Type 3 Enclosure Type 08/30 V 460 V A= Type K H= Type 3R G= Type A= Type K H= Type 3R 4 Voltage Code 5 Application Type (Applied Rating Code) W Without Bypass Package k Misc. Option J09 input programmed for 0 0 Vdc is not compatible with Control Options C07, D07 or E07 Control Options or Misc. Option C09 3 5 PSI Transducer. l Omit the Keypad Option D09 from Enclosure Door. User must buy a separate device to program the controller inside. m Serial Communication Options F09, L09, M09, O09, P09, Q09, R09 cannot be selected together. Select only one. Control Option D07 or E07 must be selected for monitoring and control with Serial Communication Options. n Light Option A08 is compatible with Control Options A07, B07, D07 and E07. o Misc. Option S09 End Damper Control is not compatible with Control Options D07 Hand Off Comm, Speed Pot. Or E07 Hand Off Comm, Start Stop, Speed Pot. p Misc. Option B09 Line Contactor is not compatible with Type 3R Enclosure. q Option T09 service entrance rating and K09 (cul) are mutually exclusive. T09 only available in Type 3R enclosures. r T09 not available on 460 V ( 7.5 hp) and 08/30 V ( 5 hp). NOTE: Order part numbers by using the Product Selectors. 6 Device Type 9 Miscellaneous Options Y Bypass Packageg X09 3% Line Reactor A09 5% Line Reactor B09 Line Contactor 08/30 V 460 V 08/30 V 460 V 08/30 V 460 V 08/30 V 460 V 08/30 V 460 V C= 64.00 584.00 64.00 584.00 56.00 49.00 773.00 695.00 73.00 73.00 6.00 6.00 50.00 50.00 D= 64.00 584.00 64.00 584.00 648.00 653.00 773.00 90.00 88.00 88.00 35.00 35.00 50.00 50.00 E=3 64.00 584.00 64.00 584.00 648.00 79.00 773.00 06.00 88.00 88.00 35.00 35.00 60.00 50.00 F=5 64.00 584.00 64.00 548.00 865.00 98.00 007.00 95.00 0.00 0.00 53.00 53.00 70.00 50.00 G = 7.5 64.00 795.00 64.00 584.00 993.00 044.00 44.00 460.00 38.00 38.00 98.00 98.00 70.00 60.00 H=0 64.00 795.00 64.00 795.00 305.00 6.00 480.00 555.00 306.00 306.00 38.00 38.00 90.00 70.00 J=5 38.00 77.00 64.00 795.00 = 08 V Included Included 3 = 30 V V=Variable 997.00 479.00 35.00 746.00 35.00 35.00 394.00 394.00 0.00 78.00 K=0 38.00 77.00 64.00 795.00 4 = 460 V Torque 384.00 89.00 45.00 395.00 38.00 38.00 478.00 478.00 68.00 90.00 L=5 38.00 77.00 64.00 795.00 390.00 3083.00 498.00 3650.00 38.00 38.00 478.00 478.00 95.00 0.00 M=30 38.00 3960.00 38.00 77.00 4895.00 3686.00 567.00 45.00 398.00 398.00 497.00 497.00 95.00 0.00 N=40 38.00 3960.00 38.00 77.00 678.00 444.00 6647.00 4647.00 448.00 448.00 560.00 560.00 5.00 68.00 P=50 38.00 3960.00 545.00 77.00 776.00 5.00 834.00 6000.00 583.00 583.00 79.00 79.00 364.00 95.00 Q=60 545.00 3960.00 6604.00 7360.00 583.00 79.00 95.00 R=75 545.00 3960.00 737.00 833.00 649.00 8.00 5.00 S = 00 545.00 3960.00 8908.00 986.00 777.00 97.00 364.00 7 Control Options A07fn Hand-Off Auto, Speed Pot. Included B07f Hand-Off Auto, Start-Stop, Speed Pot. 00.00 C07a Start-Stop, Speed Pot. 75.00 D07fh Hand-Off-Comm, Speed Pot. N/C E07fh Hand-Off-Comm, Start-Stop, Speed Pot. 00.00 N07 No operators; wired for remote operation -00.00 a Control Option C07 (Start-Stop, Speed Potentiometer) is not compatible with Power Circuit Y Bypass or Light Option A08 or B08. b Light Options A08, B08 and C08 cannot be selected together. Select only one. c Light Option B08 (Power On, Run, Fault, Bypass) is not compatible with Power Circuit W Without Bypass. d Misc. Option B09 Line Contactor is not compatible with Power Circuit W (Without Bypass). e Misc. Option E09 Smoke Purge (Fireman s Override) permits motor to run at full speed. f Hand Off Auto switch must be placed in off position for AFC fault reset. g When Power Circuit Y Bypass selected, AFC Off Bypass switch and Test Normal switch is supplied. h When communication options are selected, Control Option D07 or E07 must be selected for control. i Misc. Option C09 3 5 PSI Transducer is not compatible with Control Options C07, D07 or E07, J09 0 0 Vdc Auto Speed Reference Option, H09 I/O Extension Card, F09, L09, M09, O09, P09, Q09, R09 Serial Communication Cards. j Misc. Option H09 I/O Extension Card is not compatible with C09 3 5 PSI Transducer. 8 Light Options A08bn Power On, Run, Fault, Auto Lights 80.00 B08bc Power On, Run, Fault, Bypass Lights 80.00 C08b Power On, Run, Fault Lights 65.00 9 Miscellaneous Options A09 5% Line Reactor option See Above B09dp Line Contactor See Above C09i 3 5 PSI Transducer 80.00 D09l Omit Keypad -40.00 E09e Smoke Purge (Fireman s Override) 80.00 F09m Profibus DP 400.00 H09j I/O Extension Card, 0 0 ma Output 50.00 J09k Input programmed for 0 0 Vdc N/C K09 cul Listing Certification 40.00 L09m LonWorks Card 400.00 M09m bus / Uni-Telway Card 65.00 O09m Apogee P Card 65.00 P09m Metasys N Card 65.00 Q09m Ethernet TCP/IP 65.00 R09m BACnet Card 65.00 S09o End Damper Control 5.00 T09qr Service entrance rating 85.00 U09 Seismic Qualification 5.00 V09 Ethernet/IP Card 75.00 X09 3% Line Reactor option See Above Y09 OSHPD Adder All Enclosed 400.00 E-Flex devices are supplied with: Circuit breaker as the overcurrent protective device (OCPD) and have a coordinated short circuit current rating of 00,000 A symmetrical. Equivalent 3% DC choke is standard. Option A09 replaces DC choke with 5% line reactor. Fire/Freezestats interlock locations wired to customer terminal strip One Form C AFC run mode contact One Form C AFC fault contact Circuit Breaker Disconnect Analog Output terminals on terminal strip (A0 and COM) bus and CANopen communications built into Drive. bus Uni-Telway card option provides bus ASCII and 4 wire RS485 functions. Speed Potentiometer as part of keypad or separately mounted on the enclosure door. 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount

AC Drive Products M-Flex Enclosed Drive Controllers General Information M-Flex enclosed adjustable frequency AC drive controllers are designed for industrial, commercial and municipal process applications, where high functionality of features is required. Each M-Flex enclosed drive offers a platform of standard, engineered and special features to meet the most demanding application and specification requirements. M-Flex enclosed drive controllers are low voltage products in the following ratings: Constant torque (Heavy duty ratings 50% current limit) Altivar 7 power converter to 450 hp, 460 V to 40 hp, 08/30 V Variable torque (Light duty ratings 0% current limit) Altivar 6 power converter to 500 hp, 460 V to 50 hp, 08/30 V Application Data The table below outlines typical application characteristics with load requirements and should be used as a guideline only. This information should be confirmed by the responsible system designer for a designated installation. Application Speed-Torque Relationship Breakaway Torque Agitators Liquid Variable Torquea eratec Slurry Variable Torquea eratec Blowers Centrifugal Variable Torque Lowd Positive Displacement Constant Torque Low (Unloaded)d Calendars Constant Torque Lowd Card Machines Constant Torque eratec Centrifuges Constant Torque eratec Chippers Constant Torquea Highb Compressors Axial-Centrifugal Variable Torque Lowd Reciprocating Constant Torquea eratec Rotary Constant Torque eratec Conveyors Belt Constant Torque eratec Screw Constant Torquea Highb Shaker Constant Torquea eratec Cranes Bridge Constant Torque eratec Trolley Constant Torque eratec Hoist Constant Torque eratec Crushers Constant Torquea Highb Drill Presses Constant Horsepower eratec Elevators Constant Torque eratec Extruders Constant Torque eratec Fans-Centrifugal Variable Torque Lowd Frames-Spinning Constant Horsepower Lowd Grinders Constant Horsepower eratec Kiln Constant Torque Highb Looms Constant Torque eratec Lathes Constant Horsepowera eratec a Potential impact load. b > 50% torque. c 00 to 50% torque. d < 00% torque. Application Speed-Torque Relationship Breakaway Torque Machines Boring Constant Torque eratec Bottling Constant Torque eratec Milling Constant Horsepowera eratec Mills Rolling Constant Torquea eratec Rubber Constant Torquea eratec Mixers Chemical Constant Torque Highb Dough Constant Torque Highb Slurry Constant Torque Highb Planers Constant Torque eratec Plows-Conveyor Constant Torque eratec Presses Printing Constant Torque eratec Punch Constant Torquea eratec Pullers-Car Constant Torque eratec Pumps Centrifugal Variable Torque Lowd Positive Displacement Constant Torque eratec Slurry Constant Torque Highb Roll Benders Constant Torque eratec Sanders Constant Torque Lowd Saws Constant Torquea eratec Shakers Constant Torquea Highb Shears Constant Torquea Lowd Tension Drives Constant Horsepower eratec Tool Machines Constant Horsepower eratec Walkways Constant Torque Lowd Winches Constant Torque eratec Winders Constant Horsepower eratec Washers Constant Torque eratec 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers Product Selection To select an M-Flex enclosed drive controller, identify the basic drive and optional devices by Class, Type, ifications (MODS, E-MODS) and Special Features as required to create the catalog number shown below. In all cases, QC/Product Selectors are preferred to price enclosed drives. Contact Seneca TAG for pricing assistance with special features if required. Features highlighted in gray within this selection are ENGINEERED and require special handling by factory personnel in lieu of system supported features. CLASS 8839 TYPE MFD N G 4 V W MODS A07, H0, E30, SPL SERIES A Combination Device 8839 = Circuit Breaker Type Product Code (Prefix) MFD = M-Flex Controller Horsepower Rating C=hp Q=60hp D=hp R=75hp E=3hp S=00hp F=5hp T=5hp G = 7.5 hp U = 50 hp H=0hp W=00hp J=5hp X=50hp K=0hp Y=300hp L=5hp Z=350hp M=30hp 4=400hp N=40hp 5=450hp P=50hp 6=500hp Enclosure Environmental Rating G = Type general purpose A = Type /K dust/drip proof B = Type Filtered NOTE: Type /K pending UL approval of new UL 508C Section 9.6 testing requirements for insulation materials and is subject to availability and QC/Product Selector support. Standard M-Flex Features Type /K dust/drip proof enclosure ratings Circuit Breaker Disconnect 3% AC line reactor UL listed to UL 508C Power Conversion Equipment 00,000 A symmetrical short circuit rating Heavy duty industrial disconnect handle with lockout/tag-out provisions Hand-Off-Auto selector switch and manual speed potentiometer 0 0 Vdc and 4 0 madc speed reference input 0 0 Vdc or x-y madc programmable output Door mounted graphic display terminal Auto Start Relay (0 Vac control) One Form C AFC Run mode contact One Form C AFC Fault contact Remote fault condition reset in AUTO mode with transition of auto start contact Manual fault condition reset in OFF position of H-O-A selector switch Safety interlock/run permissive wired to customer terminal strip Permanent wire markings White component mounting plate Series Designation A = Altivar 6/7 Power converter platform ifications (0+ Options) A07 = Hand-Off-Auto selector switch with manual speed potentiometer H0 = Seismic qualified E30 = ANSI #6 enclosure paint SPL = Special features (specified) Power Circuit Type R = Barriered Bypass RVAT S = Barriered Bypass Soft Start T = Isolation & transfer W = Combination device (Drive only) Y = Integrated bypass (IEC) Z = Barriered bypass Full Voltage Application Type C = Constant torque (Heavy duty 50% current limit) V = Variable torque (Light duty 0% current limit) Voltage Code = 08 V, 60 Hz 3 = 30/40 V, 60 Hz 4 = 460/480 V, 60 Hz Conduit knockouts on top and bottom for wall mounted enclosures Removable conduit entry plates on top and bottom for floor mount enclosures ANSI #49 gray enclosure Class 0 electronic overload protection Custom wiring diagrams Isolation/Bypass Standard Features Class 0 overload protection with door mounted reset AFC-Off-Bypass selector switch Test-Normal selector switch AC3 duty rated isolation and bypass contactors (with mechanical and electrical interlocking) Bypass and isolation contactor sequencing provides true motor isolation Remote automatic bypass operation using Auto Start Relay Custom wiring diagrams 04 Schneider Electric All Rights Reserved 0/04 3

AC Drive Products M-Flex Enclosed Drive Controllers Table : HP Reference Code HP Ratings Pricing Constant Torque Controller Output Current Enclosure Frame Size Power Circuit W: Combination DIsconnect (Drive Only) Price Power Circuits (Type General Purpose Enclosures) Constant Torque Heavy Duty Rating (50% Current Limit) Power Circuit Y: IEC Integrated Isolation/ Bypass Power Circuit S: Soft Start Isolation/ Bypassa Power Circuit Z: Full Voltage Barriered Isolation/Bypass Power Circuit T: Separate Starter Isolation/Transfera Power Circuit R: RVAT Isolation/Bypassa 08/30 V C 4.6 A 485.00 84.00 N/A 3439.00 84.00 N/A D E 3 7.5 A 0.6 A C 50.00 685.00 84.00 305.00 N/A N/A 3457.00 3666.00 84.00 305.00 N/A N/A F 5 6.7 A 90.00 35.00 N/A 3730.00 35.00 N/A G H 7.5 0 4. A 30.8 A D 334.00 369.00 379.00 43.00 N/A N/A 4344.00 4738.00 379.00 43.00 N/A N/A J 5 46. A 4059.00 46.00 N/A 535.00 46.00 N/A K 0 59.4 A E 4937.00 6074.00 N/A 685.00 6074.00 N/A L 5 74.8 A 5577.00 770.00 N/A 8765.00 770.00 N/A M N 30 40 88A 4 A F 6644.00 8584.00 889.00 9754.00 N/A N/A 9937.00 3.00 889.00 9754.00 N/A N/A 460 V C. A 4.00 93.00 N/A 3546.00 93.00 N/A D 3.4 A 379.00 3057.00 N/A 367.00 3057.00 N/A E 3 4.8 A 593.00 338.00 N/A 393.00 338.00 N/A F 5 7.6 A 883.00 3604.00 N/A 49.00 3604.00 N/A G 7.5 A C 3449.00 4040.00 N/A 4655.00 4040.00 N/A H 0 4A 3860.00 4378.00 N/A 4993.00 4378.00 N/A J 5 A 4.00 504.00 N/A 5765.00 504.00 N/A K 0 7A 4860.00 55.00 N/A 663.00 55.00 N/A L 5 34A 578.00 6830.00 N/A 7875.00 6830.00 N/A M 30 40A 6703.00 797.00 N/A 905.00 797.00 N/A N 40 5A E 7803.00 8868.00 95.00 0336.00 8868.00 653.00 P 50 65A 950.00 0397.00 4666.00 385.00 0397.00 537.00 Q 60 77A 0354.00 766.00 65.00 4554.00 766.00 909.00 R 75 96A F 08.00 3656.00 870.00 6444.00 3656.00 0999.00 S 00 4 A 4447.00 889.00 40.00 0405.00 889.00 67.00 T 5 56 A H 6955.00 5.00 776.00 38.00 5.00 3358.00 U 50 80 A 098.00 5068.00 33.00 670.00 5068.00 377.00 W 00 40 A I 340.00 3933.00 39844.00 33689.00 3933.00 44053.00 X 50 30 A 746.00 N/A 45450.00 383.00 36554.00 4864.00 Y 300 36 A 3044.00 N/A 5009.00 47.00 40865.00 6337.00 Z 4 350 400 44 A 477 A J 3534.00 40357.00 N/A N/A 56667.00 64554.00 48047.00 5475.00 46070.00 5554.00 68577.00 7506.00 5 450 55 A 45605.00 N/A 776.00 60900.00 58554.00 806.00 a Factory engineered products dimensions subject to design modifications. 4 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers Table : HP Reference Code HP Ratings Pricing Variable Torque Controller Output Current Enclosure Frame Size Power Circuit W: Combination DIsconnect (Drive Only) Power Circuit Y: IEC Integrated Isolation/ Bypass Price Power Circuits (Type General Purpose Enclosures) Variable Torque Light Duty Ratings (0% Current Limit) Power Circuit S: Soft Start Isolation/ Bypassa Power Circuit Z: Full Voltage Barriered Isolation/Bypass Power Circuit T: Separate Starter Isolation/Transfera Power Circuit R: RVAT Isolation/Bypassa 08/30 V C 4.6 A 49.00 760.00 N/A 3375.00 760.00 N/A D E 3 7.5 A 0.6 A C 485.00 50.00 84.00 84.00 N/A N/A 3439.00 3457.00 84.00 84.00 N/A N/A F 5 6.7 A 685.00 305.00 N/A 3666.00 305.00 N/A G H 7.5 0 4. A 30.8 A D 90.00 334.00 35.00 379.00 N/A N/A 3730.00 4344.00 35.00 379.00 N/A N/A J 5 46. A 369.00 43.00 N/A 4738.00 43.00 N/A K 0 59.4 A E 4059.00 46.00 N/A 535.00 46.00 N/A L 5 74.8 A 4937.00 6074.00 N/A 685.00 6074.00 N/A M N 30 40 88A 4 A F 5577.00 6644.00 770.00 889.00 N/A N/A 8765.00 9937.00 770.00 889.00 N/A N/A 460 V C. A 06.00 774.00 N/A 3389.00 774.00 N/A D 3.4 A 4.00 93.00 N/A 3546.00 93.00 N/A E 3 4.8 A 379.00 3057.00 N/A 367.00 3057.00 N/A F 5 7.6 A 593.00 338.00 N/A 393.00 338.00 N/A G 7.5 A C 883.00 3604.00 N/A 49.00 3604.00 N/A H 0 4A 3449.00 4040.00 N/A 4655.00 4040.00 N/A J 5 A 3860.00 4378.00 N/A 4993.00 4378.00 N/A K 0 7A 4.00 504.00 N/A 5765.00 504.00 N/A L 5 34A 4860.00 55.00 N/A 663.00 55.00 N/A M 30 40A 578.00 6830.00 N/A 7875.00 6830.00 N/A N 40 5A E 6703.00 797.00 397.00 905.00 797.00 809.00 P 50 65A 7803.00 8868.00 336.00 0366.00 8868.00 3787.00 Q 60 77A 950.00 0397.00 544.00 385.00 0397.00 7740.00 R 75 96A F 0354.00 766.00 68.00 4554.00 766.00 909.00 S 00 4 A 08.00 3656.00 909.00 6444.00 3656.00 0999.00 T 5 56 A H 4447.00 889.00 5068.00 0405.00 889.00 30889.00 U 50 80 A 6955.00 5.00 8566.00 38.00 5.00 3358.00 W 00 40 A I 098.00 5068.00 399.00 670.00 5068.00 377.00 X 50 30 A 340.00 N/A 40889.00 33689.00 3993.00 54500.00 Y 300 36 A 746.00 N/A 4578.00 383.00 36554.00 5906.00 Z 350 44 A 3044.00 N/A 546.00 47.00 40865.00 6337.00 4 400 477 A J 3534.00 N/A 58070.00 48047.00 46070.00 68577.00 5 450 55 A 40357.00 N/A 66763.00 5475.00 5554.00 7506.00 6 500 590 A 45605.00 N/A 776.00 60900.00 58554.00 97060.00 a Factory engineered products dimensions subject to design modifications. Table 3: Constant Torque Type & G Environment Adders Variable Torque A = Type (Dust/Drip) B=TypeG (Gasket) HP @ 08/30 V 0 hp 0 hp 08.00 N/A 5 40 hp 5 50 hp 447.00 N/A HP @ 460 V 0 hp 5 hp 08.00 N/A 5 40 hp 30 50 hp 447.00 N/A 50 75 hp 60 00 hp 567.00 N/A 00 450 hp 5 500 hp N/A 333.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 5

AC Drive Products M-Flex Enclosed Drive Controllers Table 4: a b c d e Dimensions M-Flex Enclosed AC Drives Class 8839 Type MFD With or Without Options Dimensions Weights Construction Data HP/Voltage (VT) HP/Voltage (CT) Power Circuit Configuration Enclosure Size Integrated bypass for 5 hp offered in 0" wide section adder (45" total width). Barriered bypass offered in 5" wide section adder (50" total width) standard product configuration Integrated bypass for 50 00 hp offered in 0" wide section adder (50" total width). Barriered bypass offered in 5" wide section adder (55" total width) standard configuration Integrated bypass for 50 hp offered in 0" wide section adder (50" total width). Barriered bypass offered in 30" wide section adder (60" total width) factory engineered configuration Integrated bypass for 300 400 hp not available. Barriered bypass offered in 30" wide section adder (65" total width) factory engineered configuration Integrated bypass for 450 500 hp not available. Barriered bypass offered in 35" wide section adder (70" total width) factory engineered configuration Operator Control Device Options Door mounted operator controls provide dedicated control for commanding operation of the power converter functions. Select only one. Height (In) Width (In) Depth (In) lbs. Wall or Floor Mount 5 hp @ 460 V 0 hp @ 460 V 5 hp @ 08/30 V 5 hp @ 08/30 V C 49.00 0 4.8 75 Wall 7.5 0 hp @ 08/30 V 7.5 0 hp @ 08/30 V Power Circuit W Combination D 63.00 5 4.8 43 Wall 30 50 hp @ 460 V 5 40 hp @ 460 V Device or Power 5 5 hp @ 08/30 V 5 0 hp @ 08/30 V Circuit & Integrated Bypass E 93.87 0 0.38 70.5 60 00 hp @460 V 50 75 hp @460 V 30 50 hp @ 08/30 V 5 40 hp @ 08/30 V F 93.87 5 0.38 49. 5 hp @ 460 V 0 hp @ 460 V 0 hp @ 08/30 V 0 hp @ 08/30 V Power Circuits Barriered C/D 93.87 0 0.38 379 Barriered Designs Barriered E 93.87 5 0.38 5 Floor 5 5 hp @ 08/30 V 5 0 hp @ 08/30 V with Mount Disconnects 60 00 hp @ 460 V 50 75 hp @ 460 V Barriered F 93.87 30 0.38 684 30 50 hp @ 08/30 V 5 40 hp @ 08/30 V 30 50 hp @ 460 V 5 40 hp @ 460 V Z,S,TorR 5 hp @ 460 V 00 hp @ 460 V Power Circuit Wa 5" Wide Relay Section 94.58 5 0 489 50 50 hp @ 460 V 5 00 hp @ 460 V 300 500 hp @ 460 V 50 450 hp @ 460 V Power Circuit Wbc Power Circuit Wde 30" Wide Relay Section 35" Wide Relay Section 94.58 30 0 657 94.58 35 0 969 Environment Rating TypeorType /K TypeorType G Filtered Operating Handle 3" Metal Rotary 6" Metal Rotary 3" Metal Rotary 6" Metal Rotary MOD Description Flange Hand-Off-Auto selector switch with manual speed potentiometera A07 Provides a three position selector switch and manual speed potentiometer door mounted. The Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. The Off position will stop the motor. The Off position is also used to reset drive controller faults. Hand-Off-Auto selector switch, Start/Stop push-buttons with manual speed potentiometer B07 Provides a three-position selector switch and manual speed potentiometer door mounted. The Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. In the Hand position, Start/Stop push-buttons are use to start and stop the motor using a three-wire control strategy. The Off position will also stop the motor. The Off position is also used to reset drive controller faults Start/Stop push-buttons with manual speed potentiometerb C07 Provides Start/Stop pushbuttons to start and stop the motor using a three-wire control strategy. The speed is adjusted by a door mounted manual speed potentiometer. The drive disconnect is used to reset drive controller faults unless Fault Reset (P0) is ordered. Start/Stop push-buttons, Forward-Reverse selector switch with manual speed potentiometerb Provides Start/Stop push-buttons to start and stop the motor using a three-wire control strategy. The speed is adjusted by a door mounted D07 manual speed potentiometer. Motor direction is controlled with a forward reverse selector switch. The drive disconnect is used to reset drive controller faults unless Fault Reset (P0) is ordered. Hand-Off-Auto selector, Local-Remote selector switch with manual speed potentiometer E07 Provides a three-position selector switch and manual speed potentiometer door mounted. The Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. The Off position will stop the motor. The Off position is also used to reset drive controller faults. Communication-Hand-Off-Auto selector switch with manual speed potentiometerc F07 Provides a four-position selector switch and manual speed potentiometer door mounted. The Communication-Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. The Off position will stop the motor. The Off position is also used to reset drive controller faults. No Door Mounted Operators (wired for remote operation) N07 No operators are provided on the enclosure door. The customer must provide remote mounted operator controls. Drive controllers are factory programmed and configured for remote mounted Hand-Off-Auto operation. a Control option defined by default. b Available only with Power Circuit W. c Provides control and monitoring capabilities when supplied with any communication card. 60.00 45.00 9.00 60.00 49.00 Deduct 00.00 6 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers Pilot Light Combination Options Pilot lights are ordered in light groups and door mounted. Pilot light groups are selected with compatible control options. Pilot lights are all mm long life LED type. Select only one. MOD Description Power On, Fault, AFC Run, Auto pilot lightsa A08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green) and auto (yellow). Power On, Fault, AFC Run, Bypass pilot lightsb B08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green) and bypass (yellow). Power On, Fault, AFC Run pilot lights C08 Provides a combination of (3) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow) and AFC run (green). Power On, Fault, AFC Forward, AFC Reverse pilot lightscd D08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), forward (green) and reverse (green). Power On, Fault, AFC Run, Hand, Auto pilot lightsef E08 Provides a combination of (5) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green), hand (blue) and auto (yellow). Power On, Fault, AFC Run, Communication pilot lightsg F08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green) and communication (yellow). a Not available with C07 or D07. b Not available with Power Circuit W. c Available only with D07 or N07. d Available only with Power Circuit W. e Available only with A07, B07, E07 or N07. f Supplied with AMR relay. g Available only with F07 or N07. Option Cards All communication cards are provided without factory programming. Select only one. 46.00 46.00 0.00 46.00 8.00 46.00 MOD Description bus/uni-telway communication card B09 Provides a factory installed plug-in bus/uni-telway card, VW3A3303. 84.00 Johnson Controls Metasys N communication card C09 Provides a factory installed plug-in Johnson Controls Metasys N card, VW3A333. VW3A333: Obsolete. Direct replacement = VW3A338. Has 4 position network connector instead of 9 pin D-shell. 84.00 Ethernet TCP/IP communication card D09 Provides a factory installed plug-in Ethernet TCP/IP card, VW3A330, with user termination to RJ45 plug-in interface connector. 84.00 LonWorks communication card E09 Provides a factory installed LonWorks card, VW3A33. 475.00 DeviceNet communication card F09 Provides a factory installed DeviceNet card, VW3A3309. 84.00 Profibus DP communication card G09 Provides a factory installed Profibus DP card, VW3A3307. 475.00 I/O Extension card H09 Provides a factory installed I/O Extension card, VW3A30. Adds () analog outputs, 4 logic inputs, logic outputs and differential analog input. 64.00 Siemens Apogee FLN / P communication card J09 Provides a factory installed Siemens Building Automation Apogee FLN / P card, VW3A334. 84.00 BACnet communication card K09 Provides a factory installed BACnet card, VW3A335. VW3A335: Obsolete soon. Direct replacement = VW3A339. Has 4 position network connector instead of 5 position connector. 84.00 Interbus S communication card L09 Provides a factory installed Interbus S card, VW3A3304. 475.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 7

AC Drive Products M-Flex Enclosed Drive Controllers Miscellaneous Options Additional system supported features that provide miscellaneous product modifications. MOD Description 08/30 V 460 V 5% AC line reactora 3 hp 49.00 49.00 5 7.5 hp 567.00 567.00 0 5 hp 69.00 597.00 0 hp 884.00 597.00 5 hp 884.00 906.00 30 40 hp 05.00 906.00 50 hp 57.00 03.00 60 hp 03.00 A0 Provides an integrally mounted, 5% AC line reactor factory-installed and wired between the circuit breaker disconnect means and the power converter for harmonic mitigation. 75 hp 098.00 00 hp 94.00 5 hp 4.00 50 hp 368.00 00 hp 97.00 50 hp 07.00 300 hp 7.00 350 400 hp 978.00 450 500 hp 34.00 Line contactorbc 5 hp 7.00 7.00 7.5 0 hp 8.00 94.00 5 hp 7.00.00 0 hp 40.00 7.00 5 30 hp 78.00 7.00 40 hp 359.00 40.00 50 hp 58.00 78.00 60 hp 78.00 A line contactor is added between the circuit breaker disconnect (or line reactor or harmonic filter when 75 hp 359.00 B0 provided) and the power converter for bypass configured Power Circuits. With the line contactor, the AFC Fault light illuminates when the AFC-Off-Bypass selector switch is in the Off or Bypass position to indicate that the 00 hp 58.00 power converter is not running. When the line contactor is open, serial communication is disabled. 5 hp 636.00 50 hp 76.00 00 hp 045.00 50 hp 84.00 300 hp 64.00 350 hp 940.00 400 hp 97.00 450 hp 498.00 500 hp 803.00 a All M-Flex enclosed drive controllers include a 3% AC line reactor as standard. The selection of A0 substitutes a 5% line reactor in place of the 3% AC line reactor. b Available only with Power Circuit Y, unless factory engineered. c Factory engineered for 5 500 hp ratings. 8 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers Miscellaneous Options (continued) MOD Description 3 5 PSI transducerabc C0 Allows the controller to follow a user supplied 3 5 PSI input. 69.00 Omit door mounted graphic display terminal D0 The graphic display terminal is not supplied. To alter the programming of the power converter, the user must buy a graphic display terminal or SoMove software to program the drive controller. Smoke purge relay Provides a smoke purge operating mode controlled by a user-supplied 0 Vac signal wired to terminal block TB. Smoke purge operation E0 is full speed bypass (when provided) or High Speed in the drive controller. This operation is designed run the motor from any operator control setting except emergency stop or open safety interlocks Additional control power VAc a Not available with C07 or D07. b Mutually exclusive with J09. c Factory engineered for 5 500 hp ratings. d Permanent wire marking is provided as standard. e Not available with C07, D07 or C0. f Available only with Power Circuits Y, S, Z, R and T. g Available only with Power Circuit W. h Not available on Fault pilot light if P0 is selected. i Not available with B07, C07 or D07. j Mutually exclusive with V0 unless F0 is also selected. k For 5 500 hp, select E7. l Exclusive with U0 unless F0 is also selected. Deduct 00.00 F0 Provides additional control power VA using a larger control transformer (0 Vac) connected to terminal block TBfor customer use. 50 hp @ 08/30 V / 00 hp @ 460 V 50 VA 73.00 5 500 hp @ 460 V 50 VA 7.00 CSA / cul certification G0 Provides a Canadian cul (or CSA) certification when required by local code requirements. 00.00 Seismic qualified H0 Supplies a certification label and hardware qualified to seismic rating ICC ES AC56 acceptance criteria test protocol with an importance factor of.5. 54.00 Permanent wire markers (sleeve type)d I0 Provides permanent wire sleeve type markers on control wiring. 045.00 0 0 Vdc Auto speed reference (programming)e J0 Provides a controller interface for 0 0 Vdc user supplied auto speed reference signal to the AI input, on terminal block TB. The 0 0 V analog input is not isolated, but it does contain noise suppression circuitry and a programmable electronic filter. N/C Additional N.O. auxiliary drive run contactc K0 Provides additional N.O. contact for drive run indication wired to TB. 0.00 Additional N.C. auxiliary drive fault contactd L0 Provides additional N.C. contact for drive fault indication wired to TB. 0.00 N.O. Auxiliary bypass run contactcf M0 Provides additional N.O. contact for bypass run indication wired to TB. 0.00 N0 OSHPD Adder All Enclosed 400.00 N.O. Auxiliary auto mode contactac O0 Provides additional N.O. contact for auto mode indication wired to TB. 0.00 AFC Fault reset push-button acg P0 Provides factory installed door-mounted push button to fault reset LI4 on the power converter at terminal TB when Hand-Off-Auto is not supplied. 00.00 Push-to-Test pilot lightsh Q0 Provides push-to-test function on all pilot lights except Power On. 5.00 Auto transfer to bypassfi R0 Provides an automatic transfer (time adjustable 0. 0 s) to bypass in the event that the drive controller faults. A selector switch is provided inside the enclosure to enable or disable this function. Longer transfer time requirements are available by replacing the plug-in adjustable 6.00 timer. Motor elapsed time meterc S0 Provides a dedicated non-resettable elapsed time meter to record the motor run time. Runs whenever the motor is running. 6.00 Emergency stop mushroom head push-button ac T0 Provides door mounted maintained off emergency stop red mushroom pushbutton with turn-to-reset feature. 76.00 Motor space heater sequencing circuit (light duty)jk U0 Provides 50 VA/0 V to terminal block TB for motor space heater whenever the motor is not running. 40.00 Seal water solenoidcl V0 Provides 50 VA/0 V to terminal block TB for seal water solenoid whenever the motor is running. 40.00 Check valve sequencing circuit (gravity type)c W0 Provides an automatic shutdown of the drive controller when the user supplied N.C. contact from the check valve limit switch does not open within 5 seconds after the motor starts. The user limit switch contact connects to terminal block TB. Circuit provides reset function with an 30.00 illuminated (blue) push-button. ID engraved nameplates X0 Provides an engraved laminated nameplate attached to the front door of the enclosure (engraved per user request at time of order). 60.00 34.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 9

AC Drive Products M-Flex Enclosed Drive Controllers Miscellaneous Options (continued) MOD Description Harmonic filter provisionsabc a b c Y0 Provides fused output terminals with return terminals for connection of an externally mounted harmonic filter (provided separately). Class J fuses are provided. 08/30 V 460 V CT VT 5 0 hp 5 0 hp 44.00 44.00 For 5 500 hp VT units, the standard 3% line reactor is removed due to the line impedance of the harmonic filter. Not available with 3 hp controllers. Mutually exclusive with A0 Factory engineered for 5 500 hp 5 0 hp 5 5 hp 508.00 508.00 5 40 hp 30 50 hp 573.00 573.00 50 00 hp 60 50 hp N/A 640.00 50 450 hp 300 500 hp N/A 90.00 MOD Description 4 Vdc power supply Z0 Provides a 4 Vdc, 300 ma power supply at terminal block TB..00 RFI/EMI suppressor 40 Provides radio frequency interference suppression with ferrite cores which are factory supplied on the power wires ahead of the power converter. 50.00 MOD Description 60 00k Circuit Breaker Ratinga 95.00 a Only available: 460 V Constant Torque 300 450 hp. 460 V Variable Torque 300 500 hp. 0 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers Engineered Features Factory orders with engineered features (E-MOD, SPL, etc.) are subject to review by factory personnel and have longer lead-time availability. Standard M-Flex enclosure dimensions may no longer apply to orders containing any combination of engineered features. In addition, factory orders containing engineered features may carry a UL 508A (Industrial Control Equipment) label in lieu of a UL 508C (Power Conversion Equipment) label depending on configuration. Control Options The E00 series features cover control circuit option configurations for M-Flex enclosed drive controllers. E-MOD Description Door mounted meters (dedicated displays)ab Provides a dedicated door mounted meter display, analog or digital E0 Analog percent speed meter scaled 0 to 0% base speed. 3.00 E0 Analog percent current scaled 0 to 00% of rated output current. 3.00 E03 Digital ammeter (amperes) scaled 0 to times rated output amperes. 376.00 E04 Digital speed meter (frequency) scaled 0 to 7 Hz output frequency. 376.00 E05 Digital percent speed meter scaled 0 to 0% base speed. 376.00 E06 Digital percent current scaled 0 to 00% of rated output current. 376.00 Door mounted RJ45 port E Provides () Sixnet RJ45 door mounted 30 mm bulk head connector and internal CAT5 cabling for access via PC with SoMove software. The RJ45 (bus/canopen) drive port provides customer access through the enclosure door. 94.00 Auxiliary drive run contactscde E Provides (3) Form C contacts rated5a@0vacwired to terminal blocks for customer use. 85.00 Auxiliary bypass run contactsfgh E3 Provides (3) Form C contacts rated5a@0vacwired to terminal blocks for customer use. 85.00 Auxiliary drive fault contactsci E4 Provides (3) Form C contacts rated5a@0vacwired to terminal blocks for customer use. 85.00 Auxiliary auto mode contactsjk E5 Provides (3) Form C contacts rated5a@0vacwired to terminal blocks for customer use. 85.00 Adjustable restart delay timer E6 Provides an adjustable On Time Delay Relay for power up restart function, mounted and wired for AFC mode (hand or auto) mode and/or in the bypass mode (hand/auto). 43.00 Motor space heater (heavy duty) E7 Provides control circuit contacts, 0 Vac, 500 VA supply and fusing wired to terminals for customer use. 597.00 Signal loss follower alarm relayl Provides () Form C contact rated5a@0vacwired to terminal blocks for customer use. Intended for 4 0 madc control loop E8 applications where upon the loss of input signal it is desired to retain the output signal at the last input signal level. The relay provides an alarm relay contact for signal loss alert. Inhibit/shutdown sequence (timed operation) E9 Provides a relay circuit operating in the fail safe mode where a remote initiating contact opens the relay, de-energizes and after a specified time shuts the drive controller down in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). Check valve sequence (motorized type) Provides relay circuitry sequenced from a check valve limit switch. A valve closed position limit switch will energize relays that will initiate a E0 remote valve operating solenoid limited to 50 VA and give a run permissive to the drive controller in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). A valve closed position limit switch will de-energize a timer relay such that if this relay is not de-energized within a specified time period, the drive controller will shut down in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). Seal water solenoid with pressure switch feedback Provides relay, which will energize a remote seal water solenoid limited to 50 VA during drive controller operation. Additionally, the remote E initiating contact will open the relay, de-energizing and after a specified time shuts the drive controller down in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). Moisture detection relay circuit (without relay)m E Provides 4 V or 0 V control power to a customer supplied moisture detection relay device, either electronic or electro-mechanical. Factory provides pre-wired socket or mounting space only. Moisture detection relay circuit (with relay options)n E3A Relay option: Provides 4 V or 0 V control power to a moisture detection relay device, either electronic or electro-mechanical. The moisture detection relay is mounted and wired by the factory. Relay and Pilot Light indication option: Provides 4 V or 0 V control power to a customer supplied moisture detection relay device, either E3B electronic or electro-mechanical. Includes a pilot light for discrete input(s). The customer supplied moisture detection relay is mounted and wired by the factory. a Limited to one meter selection unless H09 is selected. b If H09 is selected, () additional meter can be selected. c One () Form C contact for drive run indication is supplied as standard. d Available only if K0 is selected. e Available without K0 for 5 500 hp. f One () N.O. contact for bypass run indication is supplied as standard when bypass is provided. g Available only if M0 is selected. h Available without M0 for 5 500 hp. i Available only if L0 is selected. j One () N.O. contact for auto mode indication is supplied as standard when auto mod operation is provided. k Available only if O0 is selected. l Requires use of logic output LO. m Customer supplies relay. Details concerning type must also be provided at time of order entry in Engineering Notes within QC. n Details concerning type must be provided at time of order entry in Engineering Notes within QC. 5.00 346.00 44.00 78.00 09.00 78.00 833.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount

AC Drive Products M-Flex Enclosed Drive Controllers E-MOD Description Substitute Type K operators E4 Provides Class 900 Type K 30 mm heavy duty multi-function operators in lieu of standard mm pilot devices. 45.00 Spare control relays (for customer use) E5 Provides control relays mounted and unwired for customer use. Up to (3) are available. 90.00 each Substitute pilot light lens color(s)a E6 Provides the flexibility to configure lens cap colors to contract equipment designations. Blown fuse indicators on control fuses E7 Provides blown circuit fuse indicators on control circuit fuses in lieu of standard fuses. 448.00 Motor over temperature logic input E8 Provides dedicated terminals using an external motor over temperature input (N.C. contact) factory wired and programmed..00 RTD inputs (motor protection alarm)b E9 Provides capability for accepting RTD inputs using an RTD limit alarm, factory mounted and wired. Limited to three (3) RTD inputs. 46.00 Motor management relay optionc Provides motor protection and metering functions using a selection of motor management relays. This relay provides protection for motor and load conditions: overload, differential, stator temperature, high inertia loads, undercurrent, under power, jam and bearing over temperature. The motor management relay is factory mounted and wired. Includes PT s and CT s. E30A Schneider Electric Sepam Series 0 motor protective relay 70.00 E30B Schneider Electric Sepam Series 4 motor protective relay 373.00 E30C GE Multilin 69+ motor management relay 8355.00 E30D GE Multilin 469 motor management relay 8806.00 PowerLogic power meter display option Provides a Class 300 PM800 series power module true rms meter display with basic instrumentation, demand, THD, date/time stamping, neutral current, min/max, alarms, event and data storage factory mounted and wired. E3A PM80 power module 836.00 E3B PM850 power module 95.00 E3C PM870 power module 9.00 PowerLogic circuit monitor option Provides a Class 300 CM3000 or CM4000series circuit monitor display with instrumentation, 0.% accuracy, data logging and waveform capture, factorymounted and wired. Includes PT s and CT s. E3A CM350 circuit monitor 44.00 E3B CM3350 circuit monitor 44.00 E3C CM4000T circuit monitor 55.00 E3D CM450 circuit monitor 55.00 Spare terminal blocks (unwired) E34 Provides (0) spare terminal blocks 'unwired' for customer use using the Class 9080 Type G series terminals. 7.00 End damper control circuit E35 Provides a damper control circuit to coordinate starting of the drive controller or the bypass with the position of the damper. Requires connection to customer damper limit switch. 43.00 Emergency power off push-button Provides a shunt trip modified molded case switch or circuit breaker where a push-pull maintained mushroom head push-button energizes E36 the shunt trip coil and instantaneously opens to shut down power supplied to the drive controller in the AFC mode and/or bypass mode, 3.00 coasting to an uncontrolled stop. Audible alarm horn with silencer E38 Provides an audible alarm horn, timer to annunciate a user defined conditions with a silencer push-button, factory assembled and wired for customer use. 373.00 Three-phase ammeter with selector switch Provides 3 CT's with 3-position selector switch to indicate Phase A, B or C connected on the motor leads to monitor full load amps. E39A Monitor input full load amps 940.00 E39B Monitor output full load amps 940.00 Basin high level alarm indication option E40A Alarm with pilot light: Provides relay circuit and pilot light indicator alarm for high level alarm limit switch via contact closure. Includes master reset push-button and () Form 'C' contact for customer use. 475.00 E40B Command to run and alarm with pilot light indication: Provides relay circuit, timer and pilot light indicator sequenced for high level alarm limit switch via contact closure, energizing the drive controller and/or bypass to run full speed. Includes master reset push-button and () Form 534.00 'C' contact for customer use a Specify lens cap colors desired at time of order in Engineering Notes field within QC. b Specify RTD values at time of order entry in Engineering Notes within QC. c Available for 5 500 hp only. 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers E-MOD Description Basin low-level stop with pilot light indication E4 Provides relay circuit and pilot light indicator sequenced for low level alarm limit switch via N.O./N.C.contact closure, causing the drive controller to stop. Includes master reset push-button and () Form 'C' contact for customer use. 475.00 Enclosure ventilation fan shutdown E4 Provides interlocking and timer functions of enclosure ventilation fans to shutdown during drive controller idle conditions. 475.00 High discharge pressure with pilot light indication E43 Provides relay circuitry with pilot light indicator sequenced from a pressure switch input, causing the drive controller to stop. Includes master reset push-button and () Form 'C' contact for customer use. 475.00 Low discharge pressure with pilot light indication E44 Provides relay circuit, timer with pilot light sequenced from a pressure switch input when low discharge condition. Includes master reset push-button and () Form 'C' contact for customer use. 475.00 Low seal water shutdown with pilot light indicationa E45 Provides relay circuitry, timer with pilot light sequenced from a pressure switch input when not enough seal water is supplied. Includes master reset push-button and () Form 'C' contact for customer use. 475.00 Motor over temperature shutdown with pilot lightb E46 Provides dedicated terminals using an external motor over temperature input (Form 'C' contact) and a pilot light indicator factory wired and programmed. 77.00 Phase failure relayc E47 Provides a phase failure relay (Tele RM4T series) mounted and wired to indicate phase reversal, phase loss and imbalance operating conditions. 433.00 Single test pilot light push-buttond E48 Provides a dedicated 30 mm push-to-test button for indication of operable pilot lights. 78.00 Substitute TeSys 600 V relay(s) E49 Substitutes TeSys Type NEMA rated relays rated 600 V, 0A. 588.00 a Mutually exclusive to E. b Mutually exclusive to E8. c Available with Power Circuits Y, Z, S, T, or R only. d Must also select E4. Enclosure & Miscellaneous ifications The E300 series features cover enclosure and miscellaneous option configurations for the M-Flex enclosed drive controller. E-MOD Description ANSI #6 enclosure paint E30 Provides option to configure enclosure paint to industry standard ANSI #6 light gray paint in lieu of ANSI #49 gray. 34.00 Free standing enclosurea E30 Converts all standard wall mounted enclosure configurations to a floor mounted 90 high enclosure. 55.00 Enclosure expansionb E303 Converts all standard wall and floor mounted enclosures up one enclosure size. 55.00 Barriered enclosure expansionc E304 Uses Barriered enclosure for non-bypass drives controllers. Bypass space is configured with circuit breaker disconnect and handle only. 866.00 Enclosure space heater option E305A Space heater only; provides a Hoffman type enclosure strip heater and thermostat to maintain internal low temperature ambient ratings. 896.00 E305B Space heater with storage operation provision; provides a Hoffman type enclosure strip heater and thermostat to maintain internal low temperature ambient ratings. Includes 0 V remote source input terminals for operation during storage conditions. 075.00 a Available on configurations 0 hp CT or 5 hp VT only. b Available on configurations 50 hp CT or 60 hp VT only. c Available on configurations 75 hp CT or 00 hp VT only. 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 3

AC Drive Products M-Flex Enclosed Drive Controllers Power Options The E400 series features cover engineered power option configurations for M-Flex enclosed drive controllers. E-MOD Dynamic braking resistors E40 Description Provides dynamic braking resistor top mounted on the enclosure. Resistors are 0% duty cycle constant torque (CT) applications. Overload protection for externally mounted dynamic braking resistor is mounted inside the drive controller enclosure. Motor protection filter E40 a Available for Barriered design configurations only; requires selection of Power Circuit S, Z, T, or R. 08/30V Rating Provides a factory mounted and wired dv/dt filter on the drive output for long motor lead lengths considerations in excess of published guidelines. NEMA rated contactorsa E403 Provides NEMA rated contactors for isolation and bypass configuration in lieu of the IEC rated contactors. 460 V Rating hp 68.00 3 hp 845.00 5 hp 743.00 5hp 95.00 7.5 hp 95.00 7.5 hp 060.00 0 5 hp 05.00 0 0 hp 59.00 0 5 hp 507.00 5 40 hp 67.00 30 40 hp 00.00 50 hp 397.00 60 75 hp 385.00 hp 669.00 hp 669.00 3hp 684.00 5hp 696.00 7.5 hp 75.00 0 hp 730.00 5 hp 93.00 0 hp 0.00 5 hp 057.00 30 hp 098.00 40 hp 3.00 50 60 hp 597.00 75 hp 878.00 00 hp 94.00 5 hp 3000.00 50 hp 3.00 00 hp 38.00 50 hp 303.00 300 hp 3370.00 350 hp 3904.00 400 hp 467.00 450 500 hp 4364.00 3 hp 030.00 3 hp 688.00 5 7.5 hp 05.00 5 0 hp 75.00 0 5 hp 44.00 5 0 hp 0.00 0 5 hp 77.00 5 30 hp 44.00 30 hp 060.00 40 50 hp 76.00 40 50 hp 884.00 60 hp 060.00 75 00 hp 884.00 5 hp 358.00 50 hp 375.00 00 hp 4543.00 50 hp 595.00 300 hp 536.00 350 hp 564.00 400 hp 6734.00 450 hp 739.00 500 hp 750.00 4 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products M-Flex Enclosed Drive Controllers E-MOD Description Transient voltage surge suppressor E405 Provides supplementary surge protection using a Class 30 TVSS XWF Series Transient Voltage Surge Suppressor hard-wired and factory mounted. 00,000 peak volts of surge protection. 5.00 Note: Service connection type (Delta or Wye) must be specified in Engineering Notes within QC. Dual motor overloads and branch short circuit protectiona 0 hp 430.00 5 5 hp 47.00 E406 Provides short circuit and overload protection for () motors connected to the output of the drive controller. Includes thermal overload modules for each motor. 30 50 hp 55.00 60 00 hp 746.00 5 00 hp 79.00 Motor A or B contactor alternation schemeb 0 hp 78.00 5 5 hp 64.00 E407 Provides a contactor interlocked for the selection of one motor for load share via a selector switch or rotation timer 30 50 hp 463.00 scheme. 60 00 hp 395.00 5 00 hp 6836.00 50 500 hp 4895.00 Line contactor (without bypass) 0 hp 698.00 5 5 hp 000.00 E409 Provides a line contactor between the circuit breaker disconnect (or line reactor or harmonic filter where provided) and the power converter. When the line contactor is open, serial communications is disabled. 30 50 hp 99.00 60 00 hp 90.00 5 00 hp 6485.00 Secondary surge arrestor E43 Provides a secondary surge arrester Class 667 SDSA3650 mounted and wired. 90.00 3% output reactorc E44 a b c Provides a 3% rated output reactor to address long lead considerations, mounted and wired. 5 hp 448.00 7.5 5 hp 507.00 30 40 hp 866.00 50 60 hp 985.00 75 00 hp 045.00 5 hp 04.00 50 hp 4.00 00 hp 88.00 50 hp 060.00 300 350 hp 597.00 400 450 hp CT / 400 500 hp VT 895.00 The sum of the total connected motors must not exceed the drive controller FLA rating. Specify motor FLA values at time of order entry in Engineering Notes within QC. Specify mode of operation via Motor A-Off-Motor B selector switch, remote contact closure or rotation timer scheme at time of order entry in Engineering Notes within QC. Available for 460/480 V rated devices only. 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 5

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 PowerGard Series CPD 8-Pulse Drives Class 8839 Type CPD family of drive controllers now features the Altivar 6/7 platform in an integrated 8-Pulse AC drive solution designed for the construction and industrial markets. An 8-Pulse converter design provides near linear load performance for adjustable frequency controllers rated 40 hp and above. This product is strategically designed to help the user comply with IEEE 59 guidelines. Each PowerGard 8-Pulse enclosed drive offers a feature-rich platform of standard, engineered and user-configurable options to meet the most demanding application and specification requirements with availability in the following ratings: Constant torque (Heavy duty ratings 50% current limit) Altivar 7 power converter platform 40 to 450 hp, 460 V Variable torque (Normal duty ratings 0% current limit) Altivar 6 power converter platform 50 to 500 hp, 460 V Selection To select a PowerGard 8-Pulse enclosed drive controller, identify the basic drive and optional devices by Class, Type, Options (MODS, E-MODS,) and Special Features (if required) to create the catalog number as shown below. This catalog number is used to identify the features of the product. In all cases, QC/Product Selectors must be used to price enclosed drives. CLASS 8839 TYPE CPA T G 4 V W MODS A07, etc. SERIES C Combination Device 8839 = Circuit Breaker Disconnect Design CPA = Aluminum Transformer CPC = Copper Transformer Horsepower Rating N=40hp W=00hp P=50hp X=50hp Q=60hp Y=300hp R=75hp Z=350hp S = 00 hp 4 = 400 hp T = 5 hp 5 = 450 hp U = 50 hp 6 = 500 hp Enclosure Environmental Rating G = Type general purpose B = Type Filtered a Table 5: VT 75 hp and below. PowerGard Copper Price Adder 8 Pulse Frame Size HP Range Torque Copper Transformer Copper Adder 36 X 4 4 X 4 46 X 4 40 HP Constant 80444-89-05 50 HP Variable Constant 80444-89-05 Variable 60 HP 80444-89-05 Constant Variable 80444-89-05 75 HP Constant 80444-89-0 850.00 00 Hp Variable Constant 80444-89-0 5 HP Variable 80444-89-0 5 HP Constant 50 HP Variable Constant 00 HP Variable Constant 80444-89-0 850.00 50 HP Variable 50 HP Constant 80444-89-03 300 HP Variable Constant 80444-89-03 350 HP Variable Constant 80444-89-03 900.00 400 HP Variable 80444-89-03 Constant 80444-89-04 450 HP Variable Constant 80444-89-04 900.00 500 HP Variable 80444-89-04 Series Designation C = Altivar 6/7 Power converter platform ifications (0+ Options are available) A07 = Hand-Off-Auto selector switch with manual speed potentiometer Power Circuit Type R = Barriered Bypass RVAT S = Barriered Bypass Soft Start T = Isolation & transfer W = Combination device (Drive only) Y = Integrated bypass (IEC)a Z = Barriered bypass Full Voltage Application Type C = Constant torque (50% current limit) V = Variable torque (0% current limit) Voltage Code 4 = 460/480 V, 60 Hz Standard PowerGard Features Circuit Breaker Disconnect UL listed to UL 508 00,000 A symmetrical short circuit rating Heavy duty industrial disconnect handle with lockout/tag-out provisions 8-Pulse transformer/reactor assembly 8-Pulse bridge rectifier assembly Altivar 6/7 power converter 0 V fused control transformer Hand-Off-Auto selector switch and manual speed potentiometer Door mounted graphic display terminal Auto Start Relay (0 V control) One Form C AFC Run mode contact One Form C AFC Fault contact Remote fault condition reset in AUTO mode with transition of auto start contact Manual fault condition reset in OFF position of H-O-A selector switch Safety interlock (e.g., run permissive) wired to user terminal block TB Permanent wire markings White component mounting plate Top and bottom conduit access ANSI #49 gray enclosure Class 0 electronic overload protection Optional equipment as specified Customized wiring diagrams Typical Isolation/Bypass Features (when provided) Class 0 overload protection with door mounted reset 0 V fused control transformer AFC-Off-Bypass selector switch Test-Normal selector switch AC3 duty rated isolation and bypass contactors (with mechanical and electrical interlocking) Bypass and isolation contactor sequencing provides true motor isolation Overload relay reset push button Customized wiring diagrams 6 04 Schneider Electric All Rights Reserved 0/04

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 Table 6: Horsepower HP @ 460 V Selection and Pricing HP Code Output Current (A) Combination Drive Only W Power Circuit Configurations (Type General Purpose Enclosures) Integrated Bypass Full Voltage Y Barriered Bypass Full Voltage Z Barriered Bypass Soft Start S Isolation & Transfer Separate Starter T Barriered Bypass RVAT R Constant Torque Heavy Duty Ratings (50% Current Limit) 40 N 5 3064.00 368.00 3936.00 37356.00 3485.00 37985.00 50 P 65 3077.00 3430.00 3537.00 3937.00 33934.00 4975.00 60 Q 77 30896.00 34806.00 35499.00 40330.00 3460.00 465.00 75 R 96 3657.00 35848.00 36508.00 473.00 3565.00 43693.00 00 S 4 373.00 4430.00 4946.00 4398.00 55604.00 5 T 56 4035.00 48989.00 54944.00 47099.00 60305.00 50 U 80 43053.00 5378.00 60580.00 5787.00 64993.00 00 W 40 45409.00 56673.00 64558.00 53967.00 7730.00 50 X 30 55907.00 67800.00 75900.00 65669.00 8770.00 300 Y 36 68748.00 8535.00 907.00 79306.00 03954.00 350 Z 44 73480.00 87393.00 98370.00 85033.00 0988.00 400 4 477 77796.00 93559.00 0673.00 90957.00 0835.00 450 5 55 78750.00 95500.00 0849.00 9735.00 34903.00 Variable Torque Light Duty Ratings (0% Current Limit) 50 P 65 3064.00 368.00 3936.00 37356.00 3485.00 3787.00 60 Q 77 3077.00 3430.00 3537.00 3937.00 33934.00 4975.00 75 R 96 30896.00 34806.00 35499.00 40330.00 3460.00 465.00 00 S 4 3657.00 36508.00 473.00 3565.00 43693.00 5 T 56 373.00 4430.00 4946.00 4398.00 55604.00 50 U 80 4035.00 48989.00 54944.00 47099.00 60305.00 00 W 40 43053.00 5378.00 60580.00 5787.00 64996.00 50 X 30 45409.00 56673.00 64558.00 53967.00 7730.00 300 Y 36 55907.00 67800.00 75900.00 65669.00 8770.00 350 Z 44 68748.00 8535.00 907.00 79306.00 03954.00 400 4 477 73480.00 87393.00 98370.00 85033.00 0988.00 450 5 55 77796.00 93559.00 0673.00 90957.00 0835.00 500 6 590 78750.00 95500.00 0849.00 9735.00 34903.00 Notes: For Type B enclosures with fan filter option, add $550. The listings define the available factory modifications. ifications in gray shaded areas require order engineering support. All modifications follow specific interoperability rules for selection and configuration. ification selection can be validated at the time of quotation or order entry by the QC/Product Selector process. Contact your nearest Schneider Electric sales office for details. When options with an E and/or SPL prefix appear on the name plate, engineered-to-order options are provided. Table 7: HP @ 480 V Dimensions Combination Drive only W Integrated Bypass Full Voltage Y Note: All enclosures are 94.65 height and 4 depth standard switchboard enclosures. PowerGard Series C enclosure width dimensions Barriered Bypass Full Voltage / Separate Starter ZorT Barriered Bypass Soft Start S Barriered Bypass RVAT R Total Extender Total Extender Total Extender Total Extender Total 50 to 75 36 36 0 56 0 56 4 78 00 36 36 0 56 36 7 4 78 5 36 0 56 0 56 36 7 4 78 50 4 0 6 0 6 36 78 48 90 00 4 0 6 0 6 36 78 48 90 50 4 0 6 0 6 4 84 54 90 300 48 5 73 5 73 4 90 54 0 350 48 5 73 5 73 4 90 54 0 400 48 5 73 5 73 4 90 54 0 450 48 or 54 36 84 36 84 48 96 54 0 500 48 or 54 36 84 36 84 48 96 54 0 Table 8: HP @ CT rating Weights and Heat Loss Data Weight lbs. PowerGard Series C Power Circuit W Estimated Heat Loss Estimated Heat Loss HP @ VT rating Weight Watts Loss BTU/Hour Watts Loss BTU/Hour 40 603 478 8457 50 603 674 96 50 603 674 96 60 603 838 9686 60 603 838 9686 75 603 307 033 75 603 307 033 00 703 4776 6300 00 703 3756 89 5 070 6333 65 5 703 4843 659 50 070 6637 65 50 070 6637 65 00 086 7074 444 00 086 7074 444 50 68 958 3703 50 086 958 3703 300 68 6 3880 300 68 6 3880 350 68 684 39877 350 68 684 39877 400 68 894 44007 400 68 894 44007 450 348 3793 47076 450 348 3793 47076 500 348 469 5040 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 7

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 Operator Control Device Options Door mounted operator controls provide dedicated control for commanding power converter speed and start/stop functions. Select only one. MOD Description Hand-Off-Auto selector switch with manual speed potentiometer Provides a three position selector switch and manual speed potentiometer door mounted. The Hand-Off-Auto selector switch is used to select A07 between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. The Off position will stop the motor. The Off position is also used to reset drive controller faults. Rules: Control option defined by default. Hand-Off-Auto selector switch, Start/Stop push-buttons with manual speed potentiometer B07 Provides a three-position selector switch and manual speed potentiometer door mounted. The Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. In the Hand position, Start/Stop push-buttons are use to start and stop the motor using a three-wire control strategy. The Off position will also stop the motor. The Off position is also used to reset drive controller faults. Start/Stop push-buttons with manual speed potentiometer C07 Provides Start/Stop pushbuttons to start and stop the motor using a three-wire control strategy. The speed is adjusted by a door mounted manual speed potentiometer. The drive disconnect is used to reset drive controller faults unless Fault Reset (MOD P0) is ordered. Rules: Available only with Power Circuit W. Start/Stop push-buttons, Forward-Reverse selector switch with manual speed potentiometer Provides Start/Stop push-buttons to start and stop the motor using a three-wire control strategy. The speed is adjusted by a door mounted manual D07 speed potentiometer. Motor direction is controlled with a forward -reverse selector switch. The drive disconnect is used to reset drive controller faults unless Fault Reset (Option P0) is ordered. Rules: Available only with Power Circuit W. Hand-Off-Auto selector, Local-Remote selector switch with manual speed potentiometer E07 Provides a three-position selector switch and manual speed potentiometer door mounted. The Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. The Off position will stop the motor. The Off position is also used to reset drive controller faults. The Local-Remote switch selects whether speed control is sent by a signal into terminal AI (local) or AI (remote) on terminal block TB, when the Hand-Off-Auto switch is in Auto mode. Communication-Hand-Off-Auto selector switch with manual speed potentiometer F07 Provides a four-position selector switch and manual speed potentiometer door mounted. The Communication-Hand-Off-Auto selector switch is used to select between the AI and AI analog inputs. The communication position is for communication option card control of the drive controller. In the Auto position the motor may be started and stopped by a user supplied remote contact. The speed may be adjusted by a 4 0 madc signal to analog input reference AI or the door mounted manual speed potentiometer. The Off position will stop the motor. The Off position is also used to reset drive controller faults. Rules: Provides control and monitoring capabilities when supplied with any communication card. No Door Mounted Operators (wired for remote operation) N07 No operators are provided on the enclosure door. The customer must provide remote mounted operator controls. Drive controllers are factory programmed and configured for remote mounted Hand-Off-Auto operation. 57.00 44.00 5.00 57.00 4.00 Deduct $00.00 Pilot Light Options Pilot lights are ordered in light groups and door mounted. Pilot light groups are selected with compatible control options. Pilot lights are all mm, long-life LED type. Select only one. MOD Description Power On, Fault, AFC Run, Auto pilot lights A08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green) and auto (yellow). 40.00 Rules: Not available with C07 or D07. Power On, Fault, AFC Run, Bypass pilot lights B08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green) and bypass (yellow). 40.00 Rules: Not available with Power Circuit W. Power On, Fault, AFC Run pilot lights C08 Provides a combination of (3) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow) and AFC run (green). 05.00 Power On, Fault, AFC Forward, AFC Reverse pilot lights D08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), forward (green) and reverse (green). 40.00 Rules:. Available only with D07 or N07.. Available only with Power Circuit W. Power On, Fault, AFC Run, Hand, Auto pilot lights E08 Provides a combination of (5) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green), hand (blue) and auto (yellow). 75.00 Rules:. Available only with A07, B07, E07 or N07.. Supplied with AMR relay. Power On, Fault, AFC Run, Communication pilot lights F08 Provides a combination of (4) pilot lights for visual indication of protective functions and circuit status; power on (red), fault (yellow), AFC run (green) and communication (yellow). 40.00 Rules: Available only with F07 or N07. 8 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 Option Cards All communication cards are provided without factory programming. Select only one. MOD Description bus/uni-telway communication card B09 Provides a factory installed plug-in bus/uni-telway card, VW3A3303. 7.00 Johnson Controls Metasys N communication card C09 Provides a factory installed plug-in Metasys N card, VW3A333. VW3A333: Obsolete. Direct replacement = VW3A338. Has 4 position network connector instead of 9 pin D-shell. 7.00 Ethernet TCP/IP communication card D09 Provides a factory installed plug-in Ethernet TCP/IP card, VW3A330, with user termination to RJ45 plug-in interface connector. 7.00 LonWorks communication card E09 Provides a factory installed LonWorks card, VW3A33. 45.00 DeviceNet communication card F09 Provides a factory installed DeviceNet card, VW3A3309. 7.00 Profibus DP communication card G09 Provides a factory installed Profibus DP card, VW3A3307. 45.00 I/O Extension card H09 Provides a factory installed I/O extension card, VW3A30. Adds () analog outputs, 4 logic inputs, logic outputs and differential analog input. 56.00 Siemens Apogee FLN / P communication card J09 Provides a factory installed Apogee P card, VW3A334. 7.00 BACnet communication card K09 Provides a factory installed BACnet card, VW3A335. VW3A335: Obsolete soon. Direct replacement = VW3A339. Has 4 position network connector instead of 5 position connector. 7.00 Interbus S communication card L09 Provides a factory installed Interbus card, VW3A3304. 45.00 Bluetooth bus P09 Provides a Bluetooth bus adapter, TCSWAAC3FB. 7.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 9

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 Miscellaneous Options Pre-engineered and system supported options to provide miscellaneous product modifications. MOD Description 3 5 PSI Transducer C0 Allows the controller to follow a user supplied 3 5 PSI input. 56.00 Rules:. Not available with C07 or D07.. Mutually exclusive with J09. Omit Door mounted graphic display terminal D0 The graphic display terminal is not supplied. To alter the programming of the power converter, the user must buy a graphic display terminal or SoMove software to program the drive controller. Smoke Purge Relay Provides a smoke purge operating mode controlled by a user-supplied 0 Vac signal wired to terminal block TB. Smoke purge operation is full E0 speed bypass (when provided) or High Speed in the drive controller. This operation is designed run the motor from any operator control setting except emergency stop or open safety interlocks. Additional 00 VA Control Power Deduct 00.00 F0 Provides additional control power 00 VA using a larger 0 V control transformer connected to terminal block TB for customer use. 6.00 cul Certification G0 Provides a Canadian cul certification when required by local code requirements. 90.00 Seismic Qualified H0 Supplies a certification label and hardware qualified to seismic rating ICC ES AC56 acceptance criteria test protocol with an importance factor of.5. 4.00 Permanent Wire Marker (Sleeve Type) I0 Provides permanent wire sleeve type markers on control wiring. 995.00 Note: Permanent wire markings are provided as standard. Input programmed for 0 0 Vdc AI input J0 Provides programming for 0 0 Vdc user supplied auto speed reference signal to the AI input, on terminal block TB. The 0 0 Vdc analog input is not isolated, but it does contain noise suppression circuitry and a programmable electronic filter. using a 0 0 V / 4 0 ma converter (P/n# 358-97-50). Source impedance: Z=40k Ω. Rules: Not available with C07, D07 or C0. Additional N.O. Auxiliary Drive Run Contact K0 Provides additional N.O. contact for drive run indication wired to TB. 05.00 Additional N.C. Auxiliary Drive Fault Contact L0 Provides additional N.C. contact for drive fault indication wired to TB. 05.00 N.O. Auxiliary Bypass Run Contact M0 Provides additional N.O. contact for bypass run indication wired to TB. 05.00 Rules: Available only with Power Circuits Y, S, Z, R and T. N.O. Auxiliary Auto e Contact O0 Provides additional N.O. contact for auto mode indication wired to TB. 05.00 Rules: Not available with C07 or D07. AFC Fault Reset Push-button P0 Provides factory installed door-mounted push button to fault reset LI4 on the power converter at terminal TB when Hand-Off-Auto is not supplied. 57.00 Rules:. Available only with C07 or D07.. Available only with Power Circuit W. Push-to-Test Pilot Lights Q0 Provides push-to-test function on all pilot lights except Power On pilot light. 0.00 Rules: Not available on Fault pilot light if P0 is selected. Auto Transfer to Bypass R0 Provides an automatic transfer (time adjustable 0. 0 s) to bypass in the event that the drive controller faults. A selector switch is provided inside the enclosure to enable or disable this function. Longer transfer time requirements are available by replacing the plug-in adjustable timer. 53.00 Rules:. Available only with Power Circuits Y, S, Z, T or R.. Not available with B07, C07 or D07. Motor Elapsed Time Meter S0 Provides a dedicated elapsed time meter to record the motor run time. Runs whenever the motor is running. The motor elapsed time meter is non-resettable. 53.00 Emergency Stop Mushroom Head Push-button T0 Provides door mounted maintained off emergency stop red mushroom pushbutton with turn-to-reset feature. 7.00 Rules: Not available with C07 or D07. Motor Space Heater Sequencing Circuit Light Duty U0 Provides 50 VA/0 V to terminal block TB for motor space heater whenever the motor is not running. 7.00 Rules: Mutually exclusive with V0 unless F0 is also selected. 8.00 30 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 MOD Description Seal Water Solenoid V0 Provides 50 VA/0 V to terminal block TB for seal water solenoid whenever the motor is running. 7.00 Rules: Exclusive with U0 unless F0 is also selected. Check Valve Sequencing Circuit (Gravity Type) Provides an automatic shutdown of the drive controller when the user supplied N.C. contact from the check valve limit switch does not open within W0 5 seconds after the motor starts. The user limit switch contact connects to terminal block TB. Circuit provides reset function with an illuminated 96.00 (blue) push-button. 54 inch wide enclosure Y0 Provides a 54 inch wide switchboard enclosure for bottom conduit entry space provisions. 56.00 Rules: Available for 450 500 hp ratings only. 4 Vdc Power Supply Z0 Provides a 4 Vdc, 300 ma power supply at terminal block TB. 0.00 ID Engraved Nameplates 60 Provides an engraved laminated nameplate attached to the front door of the enclosure (engraved per user request at time of order). 57.00 Engineered Features Factory orders with engineered features (E-MOD, SPL, etc.) are subject to review by factory personnel and have longer lead-time availability. Standard PowerGard enclosure dimensions may no longer apply to orders containing any combination of engineered features. In addition, factory orders containing engineered features may carry a UL 508A (Industrial Control Equipment) label in lieu of a UL 508C (Power Conversion Equipment) label depending on configuration. Control Options The E00 series features cover control circuit option configurations for PowerGard enclosed drive controllers. E-MOD Description Door mounted meters (dedicated displays) Provides a dedicated door mounted meter display, analog or digital. E0 Analog percent speed meter scaled 0 to 0% base speed. 307.00 E0 Analog percent current scaled 0 to 00% of rated output current. 307.00 E03 Digital ammeter (amperes) scaled 0 to times rated output amperes. 358.00 E04 Digital speed meter (frequency) scaled 0 to 7 Hz output frequency. 358.00 E05 Digital percent speed meter scaled 0 to 0% base speed. 358.00 E06 Digital percent current scaled 0 to 00% of rated output current. 358.00 Rules:. Limited to one meter selection unless H09 is selected.. If H09 is selected, () additional meter can be selected. Door mounted RJ45 port E Provides () Sixnet RJ45 door mounted 30 mm bulk head connector and internal CAT5 cabling for access via PC with SoMove software. The RJ45 (bus /CANopen) drive port provides customer access through the enclosure door. 85.00 Auxiliary drive run contacts E Provides (3) Form 'C' contacts rated5a@0vwired to terminal blocks for customer use. 76.00 Note: One () Form 'C' contact for drive run indication is supplied as standard. Rules:. Available only if K0 is selected.. Available without K0 for 00 450 hp CT /5 500 hp VT. Auxiliary bypass run contacts E3 Provides (3) Form 'C' contacts rated5a@0vwired to terminal blocks for customer use. 76.00 Note: One () N.O. contact for bypass run indication is supplied as standard when bypass is provided. Rules:. Available only if M0 is selected.. Available without M0 for 00 450 hp CT / 5 500 hp VT. Auxiliary drive fault contacts E4 Provides (3) Form 'C' contacts rated5a@0vwired to terminal blocks for customer use. 76.00 Note: One () Form 'C' contact for drive fault indication is supplied as standard. Rules: Available only if L0 is selected. Auxiliary auto mode contacts E5 Provides (3) Form 'C' contacts rated5a@0vwired to terminal blocks for customer use. 76.00 Note: One () N.O. contact for auto mode indication is supplied as standard when auto mod operation is provided. Rules: Available only if O0 is selected. Adjustable restart delay timer E6 Provides an adjustable On Time Delay Relay for power up restart function, mounted and wired for AFC mode (hand or auto) mode and/or in the bypass mode (hand/auto). 36.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 3

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 E-MOD Description Motor space heater (heavy duty) E7 Provides control circuit contacts, 0 V, 500 VA supply and fusing wired to terminals for customer use. 569.00 Signal loss follower alarm relay Provides () Form 'C' contact rated5a@0vwired to terminal blocks for customer use. Intended for 4 0 madc control loop applications E8 where upon the loss of input signal it is desired to retain the output signal at the last input signal level. The relay provides an alarm relay contact 05.00 for signal loss alert. Note: Requires use of logic output LO. Inhibit/shutdown sequence (timed operation) E9 Provides a relay circuit operating in the fail safe mode where a remote initiating contact opens the relay, de-energizes and after a specified time shuts the drive controller down in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). 330.00 Check valve sequence (motorized type) Provides relay circuitry sequenced from a check valve limit switch. A valve closed position limit switch will energize relays that will initiate a remote E0 valve operating solenoid limited to 50 VA and give a run permissive to the drive controller in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). A valve closed position limit switch will de-energize a timer relay such that if this relay is not de-energized within a specified time period, the drive controller will shut down in the AFC mode (hand or auto) and/or in the bypass mode (hand or auto). 404.00 Seal water solenoid with pressure switch feedback E Provides relay, which will energize a remote seal water solenoid limited to 50 VA during drive controller operation. Additionally, the remote initiating contact will open the relay, de-energizing and after a specified time shuts the drive controller down in the AFC mode (hand or auto) and/or in the 694.00 bypass mode (hand or auto). Moisture detection relay circuit (without relay) E Provides 4 V or 0 V control power to a customer supplied moisture detection relay device, either electronic or electro-mechanical. Factory provides pre-wired socket or mounting space only. 00.00 Note: Customer supplies relay. Details concerning type must also be provided at time of order entry in Engineering Notes within QC. Moisture detection relay circuit (with relay options) E3A Relay option: Provides 4 V or 0 V control power to a moisture detection relay device, either electronic or electro-mechanical. The moisture detection relay is mounted and wired by the factory. 694.00 Relay and Pilot Light indication option: Provides 4 V or 0 V control power to a customer supplied moisture detection relay device, either E3B electronic or electro-mechanical. Includes a pilot light for discrete input(s). The customer supplied moisture detection relay is mounted and wired 793.00 by the factory. Note: Details concerning type must be provided at time of order entry in Engineering Notes within QC. Substitute Type K operators E4 Provides Class 900 Type K 30 mm heavy duty multi-function operators in lieu of standard mm pilot devices. 33.00 Spare control relays (for customer use) E5 Provides control relays mounted and unwired for customer use. Up to (3) are available. 85.00 each Substitute pilot light lens color(s) E6 Provides the flexibility to configure lens cap colors to contract equipment designations. Notes: Specify lens cap colors desired at time of order entry in Engineering Notes field within QC. Blown fuse indicators on control fuses E7 Provides blown circuit fuse indicators on control circuit fuses in lieu of standard fuses. 46.00 Motor over temperature logic input E8 Provides dedicated terminals using an external motor over temperature input (N.C. contact) factory wired and programmed. 06.00 RTD inputs (motor protection alarm) E9 Provides capability for accepting RTD inputs using an RTD limit alarm, factory mounted and wired. Limited to three (3) RTD inputs. 343.00 Note: Specify RTD values at time of order entry in 'Engineering Notes' within QC. Motor management relay option Provides motor protection and metering functions using a selection of motor management relays. This relay provides protection for motor and load conditions: overload, differential, stator temperature, high inertia loads, undercurrent, under power, jam and bearing over temperature. The motor management relay is factory mounted and wired. Includes PT's and CT's. E30A Schneider Electric Sepam Series 0 motor protective relay 60.00 E30B Schneider Electric Sepam Series 4 motor protective relay 60.00 E30C GE Multilin 69+ motor management relay 7956.00 E30D GE Multilin 469 motor management relay 8385.00 PowerLogic power meter display option Provides a Class 300 PM800 series power module true rms meter display with basic instrumentation, demand, THD, date/time stamping, neutral current, min/max, alarms, event and data storage factory mounted and wired. E3A PM80 power module 796.00 E3B PM850 power module 88.00 E3C PM870 power module 34.00 3 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 E-MOD Description PowerLogic circuit monitor option Provides a Class 300 CM3000/CM4000 series circuit monitor display with instrumentation, 0.% accuracy, data logging and waveform capture, factory mounted and wired. Includes PT's and CT's. E3A CM350 circuit monitor 373.00 E3B CM3350 circuit monito 373.00 E3C CM4000T circuit monitor 430.00 E3D CM450 circuit monitor 430.00 Spare terminal blocks (unwired) E34 Provides (0) spare terminal blocks 'unwired' for customer use using the Class 9080 Type G series terminals. 68.00 End damper control circuit E35 Provides a damper control circuit to coordinate starting of the drive controller or the bypass with the position of the damper. Requires connection to customer damper limit switch. 36.00 Emergency power off push-button Provides a shunt trip modified molded case switch or circuit breaker where a push-pull maintained mushroom head push-button energizes the E36 shunt trip coil and instantaneously opens to shut down power supplied to the drive controller in the AFC mode and/or bypass mode, coasting to 307.00 an uncontrolled stop. Audible alarm horn with silence E38 Provides an audible alarm horn, timer to annunciate a user defined conditions with a silencer push-button, factory assembled and wired for customer use. 355.00 Three-phase ammeter with selector switch Provides 3 CT's with 3-position selector switch to indicate Phase A, B or C connected on the motor leads to monitor full load amps. E39A Monitor input full load amps 895.00 E39B Monitor output full load amps 895.00 Basin high level alarm indication option E40A Alarm with pilot light: Provides relay circuit and pilot light indicator alarm for high level alarm limit switch via contact closure. Includes master reset push-button and () Form 'C' contact for customer use. 45.00 Command to run and alarm with pilot light indication: Provides relay circuit, timer and pilot light indicator sequenced for high level alarm limit switch E40B via contact closure, energizing the drive controller and/or bypass to run full speed. Includes master reset push-button and () Form 'C' contact for 509.00 customer use. Basin low level stop with pilot light indication E4 Provides relay circuit and pilot light indicator sequenced for low level alarm limit switch via N.O./N.C. contact closure, causing the drive controller to stop. Includes master reset push-button and () Form 'C' contact for customer use. 45.00 Enclosure ventilation fan shutdown E4 Provides interlocking and timer functions of enclosure ventilation fans to shutdown during drive controller idle conditions. 45.00 High discharge pressure with pilot light indication E43 Provides relay circuitry with pilot light indicator sequenced from a pressure switch input, causing the drive controller to stop. Includes master reset push-button and () Form 'C' contact for customer use. 45.00 Low discharge pressure with pilot light indication E44 Provides relay circuit, timer with pilot light sequenced from a pressure switch input when low discharge condition. Includes master reset push-button and () Form 'C' contact for customer use. 45.00 Low seal water shutdown with pilot light indication E45 Provides relay circuitry, timer with pilot light sequenced from a pressure switch input when not enough seal water is supplied. Includes master reset push-button and () Form 'C' contact for customer use. 45.00 Rules: Mutually exclusive to E. Motor over temperature shutdown with pilot light E46 Provides dedicated terminals using an external motor over temperature input (Form 'C' contact) and a pilot light indicator factory wired and programmed. 6.00 Rules: Mutually exclusive to E8. Phase failure relay E47 Provides a phase failure relay (Tele RM4T series) mounted and wired to indicate phase reversal, phase loss and imbalance operating conditions. 4.00 Rules: Available with Power Circuits Y, Z, S, T, or R only. Single test pilot light push-button E48 Provides a dedicated 30 mm push-to-test button for indication of operable pilot lights. 74.00 Rules: Must also select E4. Substitute TeSys 600 V relay(s) E49 Substitutes TeSys Type NEMA rated relays rated 600 V, 0 A. 560.00 04 Schneider Electric All Rights Reserved 0/04 CP4C Discount 33

Enclosed AC Drives PowerGard Series C Enclosed Drive Controllers Class 8839 Enclosure & Miscellaneous ifications The E300 series features cover enclosure and miscellaneous option configurations for the PowerGard enclosed drive controller. E-MOD Description ANSI #6 enclosure paint E30 Provides option to configure enclosure paint to industry standard ANSI #6 light gray paint in lieu of ANSI #49 gray. 300.00 Enclosure space heater option E305A Space heater only: Provides a Hoffman type enclosure strip heater and thermostat to maintain internal low temperature ambient ratings. 853.00 E305B Space heater with storage operation provision: Provides a Hoffman type enclosure strip heater and thermostat to maintain internal low temperature ambient ratings. Includes 0 V remote source input terminals for operation during storage conditions. 03.00 Power Options The E400 series features cover engineered power option configurations for PowerGard enclosed drive controllers. E-MOD Description Motor protection filter Provides a factory mounted and wired dv/dt filter on the drive output for long motor lead lengths considerations in excess of our published guidelines, up to 000 feet. 40 hp CT 077.00 50 60 hp 50.00 75 hp 788.00 00 hp 089.00 5 hp 857.00 E40 50 hp 973.00 00 hp 3030.00 50 hp 3050.00 300 hp 309.00 350 hp 378.00 400hp 3968.00 450 500 hp 456.00 Transient voltage surge suppressor E405 Provides supplementary surge protection using a Class 30 TVSS XWF Series Transient Voltage Surge Suppressor hard-wired and factory mounted. 00,000 peak volts of surge protection. 07.00 Note: Service connection type (Delta or Wye) must be specified in Engineering Notes within QC. Secondary surge arrestor E43 Provides a secondary surge arrester Class 667 SDSA3650 mounted and wired. 76.00 3% output reactor Provides a 3% rated output reactor to address long lead considerations, mounted and wired. 40 hp CT 84.00 50 60 hp 938.00 75 00 hp 995.00 5 hp 05.00 E44 50 hp 65.00 00 hp 79.00 50 hp 96.00 300 350 hp 473.00 400 450 hp CT / 400 500 hp VT 757.00 34 04 Schneider Electric All Rights Reserved CP4C Discount 0/04

AC Drive Products Altivar Drives Table 9: a b c d e Selection and Pricing Voltage + 0% -5% 50/60 Hz Motor Powera Nominal Current Rating Input Output Horsepower kw A 5 V single-phase 30 V single-phase 30 V three-phase 30 V three-phase 30 V three-phase 30 V three-phase These power ratings are for use as switching frequency of 4 khz, in continuous operation. The ATV part numbers with the are available as H or P version (reference installation manual BBV8587 for heatsink version). Replace the with H for drives with standard heatsink on the back of the drive. Example: ATVH037M has a heatsink. Replace the with P for drives without a heatsink. These drives do not have a heatsink but have a smooth back that can be mounted to a thermally conductive machined surface. Example: ATVP037M does not have a heatsink. Available in lots of 4 by adding TQ to the end of the reference number. Available in lots of 7 by adding TQ to the end of the reference number. Discount for this product is PC4. Catalog Numberb 0.5 0.8.4 ATVH08F 85.00 0.5 0.37.4 ATV 037F 9.00 0.75 4. ATVH075F 4.00 0.5 0.8.4 ATVH08Mc 85.00 0.5 0.37.4 ATV 037Mc 9.00 0.75 0.55 3.5 ATV 055Mc 05.00 0.75 4. ATV 075Mc 4.00.5 7.5 ATVHU5Md 9.00 3. 0 ATVHUMd 348.00 0.5 0.8.4 ATVH08M3 69.00 0.5 0.37.4 ATV 037M3 76.00 0.75 4. ATV 075M3 06.00.5 7.5 ATV U5M3 67.00 3. 0 ATV UM3 30.00 3. ATV U30M3 37.00 5 3.7 6.7 ATV U40M3 436.00 Table 0: Options and Accessories Description Part Number For Use on Drives Software SoMove This software enables the user to configure, set, debug and organize maintenance task for the Altivar drives and soft starts. It can also be used to customize the integrated display terminal menus. It can be used with a direct connection or a Bluetooth wireless connection. Free download at http://products.schneider-electric.us/products-services/products/ac-drives-and-soft-starts/ USB to RJ45 adaptor: for use in connecting to a PC with a USB port User Interface Options TCSMCNAM3M00P Compatible device families: Advantys OTB, Altistart motor starters, Altivar series including HMI, Altivar controller Remote Keypad Display for ATV (IP54) VW3A006 ATV and ATV3 56.00 Remote Keypad Display for ATV (IP65) VW3A007 ATV and ATV3 56.00 Cable for remote mounting LCD graphic keypad RJ-45 connector on each end meter VW3A04R0 35.00 3 meters 5 meters VW3A04R30 VW3A04R50 any Altivar drive 35.00 35.00 0 meters VW3A04R00 45.00 Operator, mounting collar,.5 kilohm, watt potentiometer ATVPOT5K any Altivar drive 69.00 Conformity Kits EMC Conformity Kit VW3A953 ATVH08F, H037F, ATVH08M H075M, ATVH08M3 H075M3, ATVP037F, ATVP037M P075M, ATVP037M3...P075M3 5.00 EMC Conformity Kit VW3A954 ATVH075F, ATVHU5M, HUM, ATVHU5M3,HUM3, ATVPU5M3, PUM3 5.00 EMC Conformity Kit VW3A955 ATVHU30M3, ATVHU40M3 5.00 Filters EMC Filters for C, C, C3 VW3A446 ATVH08F, H037F, ATVH08M H075M, ATVP037F, ATVP037M P075M 05.00 EMC Filters for C, C, C3 VW3A447 ATVH075F, ATVHU5M, HUM 5.00 EMC Filters for C, C, C3 VW3A448 ATVH08M3 H075M3, ATVP037M3 P075M3 0.00 EMC Filters for C, C, C3 VW3A449 ATVHU5M3, HUM3, ATVPU5M3,PUM3 80.00 Converters 5 / 4 voltage converter VW3A937 All ATV ranges 88.00 Mounting Kits Mounting Plate for 35 mm DIN rail VW3A9804 ATVH08F, H037F, ATVH08M H075M, ATVH08M3 H075M3 64.00 Mounting Plate for 35 mm DIN rail VW3A9805 ATVH075F, ATVHU5M, HUM, ATVHU5M3,HUM3 7.00 Table : Configuration Tools Description Part Number For Use on Drives Universal Bluetooth Interface: Bluetooth connectivity to devices through serial RS-485, RJ45 bus port. For permanent installation, to be used during commissioning, maintenance and troubleshooting of equipment. TCSWAAC3FBe Altivar,, 3, 6, 7, and Altistart Simple Loader: to transfer configuration between like drives. For use with the Altivar product line. VW3A80 ATV,ATV3,ATV3,ATV6,ATV7 75.00 Multi-loader: to copy a configuration from a drive or from SoMove via an SD card, and transferring to another drive or to a PC VW3A8 ATV, ATV3, ATV, ATV3, ATV6, ATV7, ATS 350.00 Guiding tool cable: for connection between the MultiLoader and an ATV that is in its packaging VW3A86 ATV, ATV3, Lexium 3 30.00 5.00 80.00 04 Schneider Electric All Rights Reserved 0/04 CP4B PC4e Discount 35

AC Drive Products Altivar 3 / 3C Drives Selection and Pricing Table : Input Line Voltage 08/30 Vac Single-Phase 08/30 Vac Three-Phase 400/480 Vac Three-Phase 575/600 Vac Three- Phasec a b c Altivar 3 Selection and Pricing With a 5% Line Reactor Without a Line Reactor Open Drivesb Three-Phase Motor Powera Continuous Output Current Three-Phase Motor Powera Continuous Output Current HP kw A HP kw A Catalog Number These horsepower, wattage, and continuous ampere ratings apply to 4 khz switching frequency and maximum 50 C ambient. Refer to the installation manual for derating curves as a function of switching frequency, ambient temperature, and mounting conditions. Open type Altivar 3 Drives can be installed as UL Type with optional conduit box when following instructions in the installation manual. A minimum 3% line reactor is required on all 575 V drive installations. 0.5 0.8.5 ATV3H08M 68.00 0.5 0.37 3.3 ATV3H037M 87.00 0.75 0.55 3.7 ATV3H055M 306.00 0.75 4.6 ATV3H075M 335.00.5. 6.9 ATV3HUM 363.00.5 8 ATV3HU5M 40.00 3. ATV3HUM 468.00 0.5 0.8 0.5 0.8.5 ATV3H08M3 58.00 0.5 0.37 0.5 0.37 3.3 ATV3H037M3 87.00 0.75 0.55 0.75 0.55 3.7 ATV3H055M3 306.00 0.75 0.75 4.8 ATV3H075M3 35.00.5..5. 6.9 ATV3HUM3 363.00.5.5 8 ATV3HU5M3 4.00 3. 3. ATV3HUM3 478.00 3 4 3 3.7 ATV3HU30M3 554.00 5 4 5 7.5 ATV3HU40M3 650.00 7.5 5.5 7.5 5.5 7.5 ATV3HU55M3 84.00 0 7.5 0 7.5 33 ATV3HU75M3 03.00 5 5 54 ATV3HDM3 338.00 0 5 0 5 66 ATV3HD5M3 7.00 0.5 0.37 0.5 0.37.5 ATV3H037N4 363.00 0.75 0.55 0.75 0.55.9 ATV3H055N4 39.00 0.75 0.75.3 ATV3H075N4 4.00.5..5. 3 ATV3HUN4 449.00.5.5 4. ATV3HU5N4 497.00 3. 3. 5.5 ATV3HUN4 574.00 3 4 3 7. ATV3HU30N4 650.00 5 4 5 9.5 ATV3HU40N4 688.00 7.5 5.5 7.5 5.5 4.3 ATV3HU55N4 860.00 0 7.5 0 7.5 7 ATV3HU75N4 05.00 5 5 7.7 ATV3HDN4 386.00 0 5 0 5 33 ATV3HD5N4 7.00 0.75.7 ATV3H075S6 484.00.5.7 ATV3HU5S6 57.00 3. 3.9 ATV3HUS6 660.00 5 3.7/4.0 6. ATV3HU40S6 79.00 7.5 5.5 9 ATV3HU55S6 989.00 0 7.5 ATV3HU75S6 09.00 5 7 ATV3HDS6 594.00 0 5 ATV3HD5S6 979.00 Selection and Pricing ATV3C IP54 / UL Type Table 3: a Input Line Voltage 08/30 Vac Single-Phase 400/480 Vac Three-Phase Altivar 3 UL Type / IP54 Selection and Pricing Three-Phase Motor Powera Open Drivesb kw HP Aa Catalog Number IP54 / UL Type Enclosed Standard 0.8 0.5.5 ATV3C08M 36.00 0.37 0.5 3.3 ATV3C037M 387.00 0.55 0.75 3.7 ATV3C055M 43.00 0.75 4.6 ATV3C075M 45.00..5 6.9 ATV3CUM 490.00.5 8 ATV3CU5M 543.00. 3 ATV3CUM 63.00 0.37 0.5.5 ATV3C037N4 490.00 0.55 0.75.9 ATV3C055N4 59.00 0.75.3 ATV3C075N4 568.00..5 3 ATV3CUN4 606.00.5 4. ATV3CU5N4 67.00. 3 5.5 ATV3CUN4 774.00 3 4 7. ATV3CU30N4 878.00 5 9.5 ATV3CU40N4 99.00 5.5 7.5 4.3 ATV3CU55N4 6.00 7.5 0 7 ATV3CU75N4 40.00 5 7.7 ATV3CDN4 733.00 5 0 33 ATV3CD5N4 5.00 These horsepower, wattage, and continuous ampere ratings apply to 4 khz switching frequency and maximum 50 C ambient. Refer to the installation manual for derating curves as a function of switching frequency, ambient temperature, and mounting conditions. 36 04 Schneider Electric All Rights Reserved CP4B Discount 0/04

AC Drive Products Altivar 3 Drives Table 4: Altivar 3 Options and Accessories Description For Use on Drives Catalog Number Software SoMove This software enables the user to configure, set, debug and organize maintenance task for the Altivar 3 drive. It can also be used to customize the integrated display terminal menus. It can be used with a direct connection or a Bluetooth wireless connection. Free download at http://products.schneider-electric.us/products-services/products/ac-drives-and-soft-starts/ User Interface Kits USB to RJ45 Adaptor Kit For use in connecting to a PC with a USB port Advantys OTB, Altistart motor starters, Altivar series incl. HMI, Altivar controller TCSMCNAM3M00P 5.00 Remote Remote Keypad Display (IP54) ATV3, ATV VW3A006 56.00 Keypad Options and Remote Keypad Display (IP65) ATV3, ATV VW3A007 56.00 Accessories Remote Keypad Display and Mounting Kit ATV3 VW3A30 75.00 Remote Keypad Display ATV3, ATV6, ATV7 VW3A0 5.00 Cable for remote mounting meter Any ATV6, Any ATV7 VW3A04R0 35.00 LCD graphic keypad. RJ-45 3 meters Any ATV6, Any ATV7 VW3A04R30 35.00 connector on each end. 5 meters Any ATV6, Any ATV7 VW3A04R50 35.00 0 meters Any ATV6, Any ATV7 VW3A04R00 45.00 Communication Profibus ATV3 VW3A307 85.00 Options CANopen Daisy Chain ATV3 VW3A308 85.00 DeviceNet ATV3 VW3A309 85.00 Potentiometer Operator, mounting collar,.5 kilohm, watt potentiometer Altivar 3 ATVPOT5K 69.00 ATV3H08M to H075M, ATV3HUM, HU5M ATV3H08M3 to H075M3 ATV3HUM3, HU5M3 ATV3H037N4 to H075N4 VW3A773 95.00 ATV3HUN4 to HUN4 Braking Resistors Non-Protected (IP00) ATV3H075S6 ATV3HU5S6, HUS6 ATV3HU30N4 ATV3HU40N4 VW3A775 5.00 ATV3HU40S6 ATV3HUM ATV3HUM3 ATV3HU30M3 VW3A774 05.00 ATV3H08M VW3A345 45.00 ATV3H037M Ferrite Suppressors For downstream contactor opening ATV3H08M3 H037M3 VW3A345 45.00 ATV3H055M to HUM ATV3H055M3 to HUM3 VW3A3453 45.00 Replacement Parts Control I/O Card ATV3 Replacement Control I/O Card ATV3 all ranges VW3A30 95.00 ATV3HUM3, ATV3HU5M3, ATV3HUM,ATV3HU5M,ATV3HUM3, Fan Kit ATV3 Replacement Fan Kit ATV3H037N4, ATV3H055N4, ATV3H075N4, VZ3V30 44.00 ATV3HUN4, ATV3HU5N4, ATV3H075S6, ATV3HU5S6 ATV3HUM, ATV3HU30M3, Fan Kit ATV3 Replacement Fan Kit ATV3HU40M3,ATV3HUN4,ATV3HU30N4, VZ3V30 44.00 ATV3HU40N4, ATV3HUS6, ATV3HU40S6 ATV3HU55M3, ATV3HU75M3, Fan Kit ATV3 Replacement Fan Kit ATV3HU55N4, ATV3HU75N4,ATV3HU55S6, VZ3V303 6.00 ATV3HU75S6 Fan Kit ATV3 Replacement Fan Kit ATV3HDM3, ATV3HD5M3 VZ3V304 6.00 NOTE: Reference Catalog #8800CT040 for communication cables. Table 5: Configuration Tools b Discount for this product is PC4. Table 6: Options Field Installed Kits Description Part Number For Use on Drives Universal Bluetooth Interface: Bluetooth connectivity to devices through serial RS-485, RJ45 bus port. For permanent installation, to be used during commissioning, maintenance and troubleshooting of equipment. Simple Loader: to transfer configuration between like drives. For use with the Altivar product line. Multi-loader: to copy a configuration from a drive or from SoMove via an SD card, and transferring to another drive or to a PC DIN Rail Mount Kit Conduit Entrance Kit Multiple knockout sizes Installation ofconduit entrance kit and retention ofvent cover on top of drive controller provides the ATV3 with UL Type rating. TCSWAAC3FBb VW3A80 VW3A8 Altivar,, 3, 6, 7, and Altistart 80.00 ATV, ATV3, ATV3, ATV6 and ATV7 75.00 ATV,ATV3,ATV,ATV3, ATV6, ATV7 and ATS 350.00 Description For Use on Drives Catalog Number ATV3H08M, ATV3H037M, ATV3H055M, ATV3H075M, ATV3H08M3, ATV3H037M3, VW3A9804 7.00 ATV3H055M3, ATV3H075M3 DIN Rail Mounting Plate for 35 mm wide DIN rail ATV3HUM, ATV3HU5M, ATV3HUM3, ATV3HU5M3, ATV3HUM3, ATV3H037N4, ATV3H055N4, ATV3H075N4, VW3A9805 7.00 ATV3HUN4, ATV3HU5N4, ATV3H075S6, ATV3HU5S6 ATV3H08M, ATV3H037M, ATV3H055M, ATV3H075M VW3A38 45.00 ATV3H08M3, ATV3H037M3, ATV3H055M3, ATV3H075M3 VW3A38 45.00 ATV3HUM3, ATV3HU5M3 VW3A383 45.00 ATV3HUM, ATV3HU5M, ATV3HUM3, ATV3H037N4, ATV3H055N4, ATV3H075N4, ATV3HUN4, ATV3HU5N4, ATV3H075S6, ATV3HU5S6 ATV3HUM, ATV3HU30M3, ATV3HU40M3, ATV3HUN4, ATV3HU30N4, ATV3HU40N4, ATV3HUS6, ATV3HU40S6 ATV3HU55M3, ATV3HU75M3, ATV3HU55N4, ATV3HU75N4, ATV3HU55S6, ATV3HU75S6 ATV3HDM3, ATV3HD5M3, ATV3HDN4, ATV3HD5N4, ATV3HDS6, ATV3HD5S6 VW3A384 45.00 VW3A385 45.00 VW3A386 45.00 VW3A387 45.00 04 Schneider Electric All Rights Reserved 0/04 CP4B PC4b Discount 37

AC Drive Products Altivar 3 Drives Options Field Installed Kits (continued) Description For Use on Drives Catalog Number ATV8 Replacement Kit Dynamic Braking Resistor Kit Line Reactors RFI Input Filter a This kit contains brackets that adapt the spacing of the ATV3 mounting holes to be equivalent to that of an ATV8 with the same rating. This will permit the ATV3 to be secured to the panel holes and mounting hardware already in place for the ATV8. DB resistors are provided in a Type enclosure and are thermally protected. ATV3H08M, ATV3H037M, ATV3H055M, ATV3H075M ATV3H08M3, ATV3H037M3, ATV3H055M3, ATV3H075M3 ATV3HUM, ATV3HU5M, ATV3HUM3, ATV3HU5M3, ATV3HUM3, ATV3H075S6, ATV3HU5S6 ATV3HU55M3, ATV3HU75M3, ATV3HU55N4, ATV3HU75N4, ATV3HU55S6, ATV3HU75S6 30/460 V See page 56 of this Price Guide. 575 V For compliance with European (CE) conducted emissions standard 550 Class B (Class A filter built into 30/460 V ATV3 drives) Discount schedlue for line reactors is CP4C. Open Style Enclosed (Type ) Single-phase supply voltage: 00 40 V 50/60 Hz 3 phase supply voltage: 00 40 V 50/60 Hz 3 phase supply voltage: 380 500 V 50/60 Hz VW3A38 5.00 VW3A38 5.00 VW3A383 5.00 ATV3H08M 037M ATV3H08M3 037M3 ATV3H037N4 U40N4 ATV3H055M UM ATV3H055M3 UM3 ATV3HU55N4 U75N4 ATV3HU30M3 U40M3 ATV3HDN4 D5N4 VW3A667 VW3A667 VW3A6673 4.00 633.00 950.00 ATV3HU55M3 U75M3 VW3A6674 66.00 ATV3HDM3 D5M3 VW3A6675 846.00 ATV3H075S6 RL000a 58.00 ATV3HU5S6 ATV3HUS6 RL00403a 63.00 ATV3HU40S6 RL00803a 45.00 ATV3HU55S6 RL0080a 79.00 ATV3HU75S6 RL00a 00.00 ATV3HDS6 RL080a 53.00 ATV3HD5S6 RL050a 9.00 ATV3H075S6 RL00a 89.00 ATV3HU5S6 ATV3HUS6 RL0043a 94.00 ATV3HU40S6 RL0083a 379.00 ATV3HU55S6 RL008a 30.00 ATV3HU75S6 RL0a 33.00 ATV3HDS6 RL08a 388.00 ATV3HD5S6 RL05a 507.00 ATV3H037M ATV3H055M ATV3H075M VW3A340 58.00 ATV3HUM ATV3HU5M VW3A3403 79.00 ATV3HUM VW3A3405 08.00 ATV3H08M3 ATV3H037M3 ATV3H055M3 ATV3H075M3 VW3A340 7.00 ATV3HUM3 ATV3HU5M3 ATV3HUM3 VW3A3404 90.00 ATV3HU30M3 ATV3HU40M3 VW3A3406 33.00 ATV3HU55M3 ATV3HU75M3 VW3A3407 89.00 ATV3HDM3 ATV3HD5M3 VW3A3408 97.00 ATV3HDN4 ATV3HD5N4 VW3A3409 43.00 ATV3H037N4 ATV3H055N4 ATV3H075N4 ATV3HUN4 VW3A3404 90.00 ATV3HU5N4 ATV3HUN4 ATV3HU30N4 ATV3HU40N4 VW3A3406 33.00 ATV3HU55N4 ATV3HU75N4 VW3A3407 89.00 ATV3HDN4 ATV3HD5N4 VW3A3409 43.00 38 04 Schneider Electric All Rights Reserved CP4B CP4C Discount 0/04

AC Drive Products Altivar 3 Drives Selection and Pricing The Altivar 3 is intended for use with three-phase asynchronous and synchronous motors. Select the Altivar 3 using the nameplate voltage and full load ampere rating of the motor and the table below. The horsepower ratings are for reference only. Size A Size C Size D Size B VW3 A3 608 VW3 A3 68 VW3 A3 66 Mounting using VW3A990 GV mounted using VW3A99 and GV AF4 Table 7: Input Line Voltage 00 40 Vac Single-Phase Input 380 480 Vac Three-Phase Input Network Communication Option Cards The Altivar 3 can accept one of the following network communication option cards. The card slides into the Altivar 3 without taking up addition panel space, CANopen from the embedded port is disabled when an option card is installed. Table 8: CANopen daisy chain option card, two RJ45 ports VW3A3608a 30.00 0.3 meter CANopen cable with two RJ45 connectors VW3CANCARR03 5.00 meter CANopen cable with two RJ45 connectors VW3CANCARR 5.00 CANopen end of line terminator with RJ45 connector TCSCAR03M0a 0.00 IP0 CANopen junction box with: screw terminal blocks for trunk cable tap connection RJ45 connectors for connection to drives VW3CANTAP 30.00 RJ45 connector for connecting a PC CANopen single port option card, 9 pin male SUB-D connector VW3A368a 49.00 CANopen single port option card, removable 5 position screw connector VW3A368 30.00 Profibus DP V single port option card, 9 pin male SUB-D connector Supports CiA 40 drive profile and Profidrive profile, Offers several message handling modes based on DP V VW3A3607a 8.00 DeviceNet single port option card, removable 5 position screw connector Supports CIP AC drive profile and CiA 40 drive profile. VW3A3609 85.00 Ethernet IP bus TCP/IP daisy chain option card, two RJ45 ports 0/00 Mbps, half duplex and full duplex, embedded web server, VW3A366a 50.00 EtherCAT daisy chain option card, two RJ45 ports VW3A360a 300.00 a Discount for this product is PC5. Table 9: a Discount for this product is I. DC Bus Connectors Use these connectors to daisy chain multiple Altivar 3 drives together to balance acceleration and decelerating loads. (Use in addition to dynamic braking resistors in this type of application.) Or use these connectors when the drives are powered at the DC bus only. b Altivar 3 Selection and Pricing Three-Phase Continuous Dimensions Motor Power Output Current Catalog Number W H D HP kw A IN mm IN mm IN mm Discount for this product is PC5. Frame Size 0.5 0.8.5 ATV3H08M.77 45.8 35 9.65 45 A 335.00 0.50 0.37 3.3 ATV3H037M.77 45.8 35 9.65 45 A 365.00 0.75 0.55 3.7 ATV3H055M.77 45.8 35 9.65 45 A 395.00 0.75 4.8 ATV3H075M.77 45.8 35 9.65 45 A 40.00.5.0 6.9 ATV3HUM.36 60.8 35 9.65 45 B 475.00.50 8 ATV3HU5M.36 60.8 35 9.65 45 B 55.00 3.0 ATV3HUM.36 60.8 35 9.65 45 B 60.00 0.50 0.37.5 ATV3H037N4.77 45.8 35 9.65 45 A 490.00 0.75 0.55.9 ATV3H055N4.77 45.8 35 9.65 45 A 55.00 0.75.3 ATV3H075N4.77 45.8 35 9.65 45 A 550.00.5. 3 ATV3HUN4.77 45.8 35 9.65 45 A 60.00.5 4. ATV3HU5N4.77 45.8 35 9.65 45 A 665.00 3. 5.5 ATV3HUN4.36 60.8 35 9.65 45 B 75.00 4 3 7. ATV3HU30N4.36 60.8 35 9.65 45 B 85.00 5 4 9.5 ATV3HU40N4.36 60.8 35 9.65 45 B 980.00 7.5 5.5 4.3 ATV3HU55N4 5.90 50 9.5 35 9.3 3 C 9.00 0 7.5 7 ATV3HU75N4 5.90 50 9.5 35 9.3 3 C 455.00 5 7.7 ATV3HDN4 7.08 80 3 330 9.3 3 D 85.00 0 5 33 ATV3HD5N4 7.08 80 3 330 9.3 3 D 35.00 Network Communication Option Card Selection and Pricing Mounting Accessories Description Catalog Number Qty. Description For Use On Catalog Number Qty. Adaptor to mount the ATV3 control module rotated 90 Use this adaptor to mount the ATV3 control module rotated 90, allowing the ATV3 to be mounted in a shallow enclosure. Bracket for mounting GV manual protector on an ATV 3 Metal bracket mounts to the ATV3 and holds a GV. Requires a GVAF4 adaptor for electrical connections. Must order in sets of 0. Adaptor for use with mounting a GV on an ATV 3 Provides electrical power connections between GV and ATV3. Requires a VW399 bracket to mount the GV. Must order in sets of 0. Table 30: Mounting Accessories Daisy chain DC bus cord with two connectors ATV3H M to ATV3H037N4 U40N4 ATV3H M to ATV3H037N4 U40N4 ATV3H M to ATV3H037N4 U40N4 VW3A990 45.00 VW3A99 4.50 GVAF4a 3.0 Description Use To Connect Catalog Number Qty. Daisy chain DC bus cord with one connector and flying leads at one end Daisy chain DC bus cord with two connectors ATV3H M ATV3H037N4 U40N4 ATV3H037N4 U40N4 to ATV3HU55N4 D5N4 ATV3H037N4 U40N4 to ATV3HU55N4 D5N4 VW3M70R0b 5 83.00 VW3M70R50b 5.00 VW3M07b 0 5.00 Mounting using VW3M70R0 04 Schneider Electric All Rights Reserved 0/04 Ia PC5a CP4B Discount 39

VW3 A7 608 R VW3 A7 70 VW3A44 VW3A444 AC Drive Products Altivar 3 Drives Options and Accessories IP 65 Rated Dynamic Braking Resistors for the Altivar 3 For use with high inertia motor loads, generating motor mode loads and machines with fast cycle times. See Altivar 3 Installation Manual for sizing information Table 3: For Use On Altivar 3 Options and Accessories Minimum Resistor Value to Connect to the Drive: ohms Resistor Description Ohmic Value: Average Power Available at 50 C ohms watts Catalog Number IP 0 Rated Dynamic Braking Resistors for the Altivar 3 For use with high inertia motor loads, generating motor mode loads and machines with fast cycle times. See Altivar 3 Installation Manual for sizing information EMC Input Filters for the Altivar 3 Maximum length in meter of shielded cable between drive and motor in reference to IEC 6800-3. Category (C) is for residential limits Category (C) is for industrial limit Cable Length: m ATV3H08M H075M 40 ATV3H037N4 H075N4 80 00 00 VW3A7608R07a 0.75 305.00 ATV3HUN4 HUN4 54 VW3A7608R30a 3 43.00 ATV3HUM HU5M 7 7 00 VW3A7605R07a VW3A7605R30a 0.75 3 80.00 43.00 ATV3HUM 5 7 00 VW3A7603R07a VW3A7603R30a 0.75 3 03.00 6.00 ATV3HU30N4 ATV3HU40N4 54 36 7 00 VW3A7606R07a VW3A7606R30a 0.75 3 03.00 6.00 ATV3HU55N4 HU75N4 7 7 400 VW3A7604R07a VW3A7604R30a 0.75 3 70.00 333.00 a Discount for this product is PC5. Table 3: For Use On Altivar 3 IP 0 Rated Dynamic Breaking Resistors Minimum Resistor Value to Connect to the Drive: ohms Output Motor Filters for the Altivar 3 Motor filters can be installed between the Altivar 3 and the motor to: limit the dv/dt at the motor terminals filter interference reduce leakage current filter the current wave form to create a smoother wave form to reduce motor noise. This listing is a global offer. See page 64 of this document for additional filters available in the USA. ATV3HUM 75 6 VW3A4553a 489.00 ATV3HUN4 HU40N4 65 0 VW3A455a 379.00 ATV3HU55N4 75 6 <00 <00 VW3A4553a 489.00 ATV3HU75N4 HDN4 90 30 VW3A4554a 70.00 ATV3HD5N4 80 60 VW3A4555a 085.00 a Discount for this product is PC5. Resistor Description Ohmic Value: Average Power Available at 50 C Catalog Number ohms watts ATV3H08M H075M 40 ATV3HUM HU5M 7 ATV3H037N4 H075N4 80 00 50 VW3A770 575.00 ATV3HUN4 HU30N4 54 ATV3HU40N4 36 ATV3HUM ATV3HU55N4 HU75N4 5 7 60 00 VW3A770 785.00 ATV3HDN4 HD5N4 8 8 00 VW3A7703 65.00 Table 33: For Use On Altivar 3 EMC Input Filters Filter Mounts Heat Loss Watts Nominal Current Amps Category C m Category C m Catalog Number ATV3H08M ATV3H037M ATV3H055M ATV3H075M ATV3HUM ATV3HU5M on side of drive on side of drive 3.7 6.9 0. 7.6 0 0 50 50 VW3A440 VW3A44 79.00 95.00 ATV3HUM on side of drive 7.5 3.9 0 50 VW3A446 0.00 ATV3H037N4 ATV3H055N4 ATV3H075N4 ATV3HUN4 ATV3HU5N4 ATV3HUN4 ATV3HU30N4 ATV3HU40N4 ATV3HU55N4 ATV3HU75N4 on side of drive on side of drive underneath drive 9.5 5.8 9.3 5 5 47 0 0 0 50 50 50 VW3A44 VW3A443 VW3A444 79.00 0.00 45.00 ATV3HDN4 ATV3HD5N4 underneath drive 7.4 49 0 50 VW3A445 75.00 Table 34: For Use On Altivar 3 Output Motor Filters Heat Loss Watts Nominal Current Amps Shielded m Cable Length Unshielded m Catalog Number 40 04 Schneider Electric All Rights Reserved CP4B PC5a Discount 0/04

AC Drive Products Altivar 3 Drives VW3A006 VW3A0 VW3A0 VW3A03 VW3A0 VW3A04R0 Multi-loader Table 35: Altivar 3 Options and Accessories Description For Use On Catalog Number Software SoMove PC software enables the user to configure, set, diagnose and maintain the Altivar 3 drive. The ATV Logic and Safety functions embedded in the Altivar 3 drive must be configured with this software. The software can also be used to customize the integrated display terminal menus. It can be used with a direct connection or a Bluetooth wireless connection. Free download www.schneider-electric.us Cable to connect PC to Altivar 3 USB/RS485 cord set (equipped with RJ45 socket) TCSMCNAM3M00P 5.00 Remote Display Keypad and cables Remote LED Display Keypad Description: 4 digit, 8 keys, 50 C rated IP54 keypad, also select remote keypad cable below Altivar & Altivar 3 VW3A006b 65.00 IP65 keypad, also select remote keypad cable below VW3A007b 65.00 Remote LCD Graphic Display Keypad, cables and accessories Remote LCD Graphical Display Keypad Description: 8 line, 4 characters per line, plain text, 8 keys, rotary wheel, 600 C IP54 rated, Type Altivar, 3, 3, 6, & 7 VW3A0 5.00 Remote LCD Graphical Keypad Mounting accessories IP54, Type rated kit for remote mounting LCD Graphical keypad on enclosure door VW3A0 VW3A0 55.00 Clear plastic door for use with kit VbW3A0 for IP65 rating and tamper resistance VW3A0 VW3A03 45.00 Female / Female right angle RJ45 adaptor, to connect cable and keypad.a VW3A0 VW3A05 35.00 Remote Keypad Cables Equipped with RJ45 Connectors meter length VW3A0 VW3A04R0 35.00 3 meter length VW3A0 VW3A04R30 35.00 5 meter length VW3A0 VW3A04R50 35.00 0 meter length VW3A0 VW3A04R00 35.00 bus Serial Link Connection via splitter box and RJ45 connectors Length bus splitter box (with 0 RJ45 Connectors) LU9GC3a 3.00 Cordsets for bus serial link (with RJ45 connectors Multi-loader Cable. Fitted with non-locking RJ45 connector and handle to reach into Altivar & Altivar 3 packaging. VW3A8 VW3A86 30.00 Operator Interface Operator, mounting collar,.5 kilohm, watt potentiometer Altivar 3 ATVPOT5K 69.00 a Not required if using VW3A0. b Discount for this product is CP4B. c Available nd Quarter 0..3 m LU9GC3 VW3A8306R03b 0.00 m LU9GC3 VW3A8306R0b 5.00 3 m LU9GC3 VW3A8306R30b 30.00 bus T-junction boxes (with integrated cables).3 m LU9GC3 VW3A8306TF03b 75.00 m LU9GC3 VW3A8306TF0b 85.00 RJ45 Line Terminators (Sold in lots of ) LU9GC3 VW3A8306RCb 6.00 Configuration Loaders Use to Upload Download and store drive configuration settings Simple Loader Using RJ45 port on product, one product configuration can be downloaded from a product, stored & uploaded to similar products. Cable included. Altivar, 3, 3, 6, 7 VW3A80 75.00 Multi-Loader Multiple product configurations can be downloaded from a PC or drive, stored on an SD card and uploaded to similar products. Altivar,, 3, 3, 6, 7 Altistart Table 36: Altivar 3 Replacement Cooling Fans These replacement cooling fans have a quick connect connector and snap into the Altivar 3. Replacement Cooling Fansc VW3A8 350.00 Description For Use On Reference Number ATV3H08M...075M ATV3H037N4...HU5N4 VZ3V3A00 75.00 ATV3HUM...UM ATV3HUN4...HU40N4 VZ3V3B00 85.00 ATV3HU55N4...ATV3U75N4 VZ3V3C00 05.00 ATV3HDN4...HD5N4 VZ3V3D00 35.00 04 Schneider Electric All Rights Reserved 0/04 PC5 CP4Bb CPG CP4C Discount 4