Catalog Edition 2014. DIN-Rail components for rolling stock applications

Catalog Edition 014 DIN-Rail components for rolling stock applications

1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 17 18 CDC00053D004 DIN Rail components for rolling stock applications

DIN-Rail components for rolling stock applications Introduction Miniature circuit breakers Residual devices Accessories Technical details Wiring diagrams and overall dimensions ABB solutions for the railway industries References to other low voltage-related documents for traction 1 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 18 DIN Rail components for rolling stock applications CDC00053D004 3

Introduction 1 The requirements for rolling stock are increasing and will continue to do so. The task is to implement ever faster connections, while also increasing traveler comfort. During their everyday work, the trains are exposed to very high environmental, electrical and mechanical loads. This means a constant stream of new, increased and standardized safety standards for rolling stock. 1/4 CDC00053D004 DIN-Rail components for rolling stock applications

1 ABB supports the high levels of expectations for a safe means of transport ABB is a market leader in supplying products and services to the rolling stock manufacturers. We are present in more than 100 countries and we can provide strong local support to your project. With a truly global organization, we are committed to local competence and local service. We also support transport operators throughout the whole life cycle of the traction chain, i.e. in the areas of service, maintenance, upgrades, and retrofit projects. The breadth of our product portfolio has allowed us to become leader in the railway sector. IRIS certification In 005, the IRIS Group was established as a UNIFE Group with the goal of securing higher quality in the railway industry. This was to enhance supra-national competition by enabling any railway component supplier to meet globally recognized levels of quality for its railway components. The aim of IRIS is to develop and implement a global system for the evaluation of companies securing a very high quality in the railway industry. The IRIS system defines requirements in content, procedures and evaluation of audits as well as a requirement profile for the certification bodies and auditors. ABB IRIS certified factories are listed on the IRIS internet portal: http://www.iris-rail.org/index.php CERTIFCATE C E R T I F I C A T E awarded to ABB Switzerland- CMC LVP Ltd International Railway Industry Standard, Revision 0, June 009 Fulachstrasse 150 CH801 Schaffhausen Switzerland DEKRA Certification GmbH, as an IRIS-approved accreditation organisation, herewith certifies that the company AB B S T O T Z - K O N T AK T G m b H DQS GmbH confirms, as an IRIS approved certification body, that the Management System of the above organization has been assessed and found to be in accordance with the Eppelheimer Straße 8 D-6913 Heidelberg International Railway Industry Standard (IRIS) Revision 0, May 009 Scope of certification: 06 - Auxiliary Systems 0 - Single Railway Components for the activity of Design and development & Manufacturing for the scopes of certification 0 (Single railway components) of miniature circuit breakers for rolling stock IRIS-related activities: Manufacturing & Design and development of manual motor starters, mini-contactors, installation contactors and thermal overload relais, circuit breakers with accessories and material for electrical installation Certificate valid from: /11/01 Certificate valid until: 1/11/015 * has introduced and is effectively employing a quality management system conforming to the stipulations of the above standard. Verification thereof is provided in audit report No. A09071485-1. This certificate is valid from 07.11.01 to 4.11.015 Certificate registration No.: 70091007/1 Duplicate DEKRA Certification GmbH Stuttgart, 1.11.01 Current date: 9/11/01 Certificate-Register-No.: 49815 IRIS * Providing that the subsequent surveillance audits are successful before the anniversary of this validity date. Lack of fulfilment on conditions as set out in the Certification Agreement may render this certificate invalid. This document has been produced by the Audit-Tool V. 4.0..3 licensed to DQS, on 9/11/01 01 UNIFE. All rights reserved. 1/1 Page 1 of 1 DIN-Rail components for rolling stock applications CDC00053D004 1/5

Introduction Railway reference standards 1 Fire safety and general requirements The use of DIN rail modular devices in rolling stock is subject to the highest possible safety standards and thus compliance with special standards. In this regard, the key standards are: The fire protection standard EN 45545 Railway applications Fire protection on railway vehicles The fire protection standard NF F 16-101: Rolling stock. Fire behaviour. Materials choosing and NF F 16-10: Railway rolling stock. Fire behaviour. Materials choosing, application for electric equipment Shock and vibration IEC 61373: Railway applications Rolling stock equipment Shock and vibration tests Fire and smoke protection standard EN 45545 This standard has been developed from existing fire safety regulations for railway vehicles from the International Union of Railways (UIC) and different European countries and specifies the reaction to fire performance requirements for materials and products used on railway vehicles. The reaction to fire performance requirements of materials and components depend on their intrinsic nature but also: on the location of the materials or components within the design; on the shape and the layout of the materials; on the surface exposed and the relative mass and the thickness of the materials. It is on this basis that the listed products have been classified and further differentiated into subgroups as follows: their general location (interiors or exteriors); their specific use (furniture, electrotechnical equipment or mechanical equipment). DIN-Rail devices are classified, according the following table. Product No. E EL10 Name Details Requirements Electrotechnical equipment Small electrotechnical products Examples include low power circuit breakers, overload relays, contactors, contactor relay, switches, control or signalling switches, terminals, fuses Note: All ABB devices available on this catalogue meets R6 requirements. R6 The set of requirements defines the ability of products to contain fire development to an appropriate degree considering the location, the exposed surfaces, their geometry and general disposition. Requirements for R6 level are described in the chart below: Short name of requirement set (used for) R6 (EL10) Test method reference T17 EN 60695-11-10 Parameter Unit Vertical small flame test Maximum or Minimum HL1 HL HL3 Minimum V0 V0 V0 The design of rolling stock and the products used shall incorporate the aim of limiting fire development in case an ignition event occurs so that an acceptable level of safety is achieved. In the event of a fire, passengers and staff will be able to escape from the fire unaided and be able to reach a place of safety. The operation and design categories defined in EN 45545-1 are used to establish hazard levels that are used as the basis of a classification system. Hazard levels have been determined according to the operating categories of a train and how the train itself is concepted. The operating conceptions are divided into four different types starting with standard vehicles to trains with sleeping cars. These trains usually operates in different operating environments. According to EN 45545, there are four types of environments depending on the distance a train is travelling inside tunnels. The combination of those two criteria is decisive for the Classification of the Hazard Level. Below you find a matrix that is indicating the hazard level of the different combinations of operating conceptions in combination with the train type. Train types Tunnel length Operating Conceptions N A D S Standard vehicles Automatic vehicles without staff level vehicles Sleeping cars levels or 1 level km on board 1 < 1 km HL1 HL1 HL1 HL < 5 km HL HL HL HL 3 > 5 km HL HL HL HL3 4 > 5 km no side evacuation HL3 HL3 HL3 HL3 Note: ABB DIN-Rail modular devices for rolling stock application are classified with the highest hazard level HL3. 1/6 CDC00053D004 DIN-Rail components for rolling stock applications

Fire and smoke protection standards NF F 16-101/10 NF F 16-101/10 are French standards representing today the world wide most recognized regulations in the railway business. They serve to classify the non-metallic materials which are used in rolling stock applications with regard to flammability, smoke development and toxicity in case of fire. The purpose of these standards is to propose a method of classification of materials for rolling stock obtained from the results of standardized tests. In particular: NF F 16-101 (Railway rolling stock, fire behaviour, choice of materials): establishes rules relating to the choice of materials according to their fire behaviour with regard to reaction to fire, opacity of smoke and toxicity of gases emitted. This standard is applicable to all non-metallic materials in defined zones of rolling stocks with the target to protect human live. NF F 16-10 (Railway rolling stock, fire behaviour, material choosing, application for electric system): it s complementary to the NF F 16-101 for electrical equipment. This standard specifies the application of NF F 16-101 to electrical system and especially to individual device. According to these standards, two different tests are needed for electrical materials: Parameter Test required Classification Flammability 1. LOI (oxygen index): volume in % of oxygen which I is needed to inflame a material. Glow wire test: 30s connecting time of a glow wire (850/960 C) with the testing sample observing of the performance. Opacity and toxicity of smoke I.F. (franz. Indice de fumée): is the French name of smoke index F The two fire properties inflammability and smoke consistency are hereby put in relation: Inflammability I0 (low) I1 I I3 I4 (high) NC Smoke consistency (density and toxicity F0 (favorable) F1 F F3 F4 F5 (unfavorable) 1 DIN-Rail components for rolling stock applications CDC00053D004 1/7

1 The outcome are exigence classes 1 4 whereby class 4 represent the most strict requirement Exigence 1 Exigence Exigence 3 Exigence 4 I0 I1 I I3 I4 NC I0 I1 I I3 I4 NC I0 I1 I I3 I4 NC I0 I1 I I3 I4 NC F0 F0 F0 F0 F1 F1 F1 F1 F F F F F3 F3 F3 F3 F4 F4 F4 F4 F5 F5 F5 F5 I: Flammability; F: Opacity and toxicity of smoke n authorized n not authorized Depending on rolling stock category, installation place and weight of the share of non-metal material used, the electrotechnical components need to fulfill defined exigence classes. The table below represents the rolling stock types, classified by the NFF. Exigence-Classes Installation place Inside rail car Passenger area and staff area 1 Material Rail car type g A1 A B < 10 0 0 0 10 < 100 > 100 3 3 3 Engine 300 0 0 0 room > 300 Outside rail car 3 300 0 0 0 > 300 1 1 In particular 3 categories are defined: A1 Category: all rolling stock, including driver s cab, of which tunnel utilization is frequent A Category: urban and suburban rolling stock, including driver s cabin, of which tunnel utilization is less frequent, railcar and trailers and long-distance rolling stock ( mainline sleeper cars ) B Category (does not include double level rolling stock): long-distance rolling stock ( main-line sleeper cars ) with seating places, including driver s cabin, of which tunnel utilization is less frequent and driving cab of locomotives and light rail motor tractors 1 1 1 Passenger area and staff area 3 Engine room Outside rail car 3 1/8 CDC00053D004 DIN-Rail components for rolling stock applications

Shock and vibration tests IEC 61373 This International Standard specifies the requirements for testing items of equipment intended for use on railway vehicles which are subsequently subjected to vibrations and shock owing to the nature of railway operational environment. To gain assurance that the quality of the equipment is acceptable, it has to withstand tests of reasonable duration that simulate the service conditions seen throughout its expected life. The test values quoted in this standard have been divided into three categories dependent only upon the equipment s location within the vehicle (Category 1 Body mounted; Category Bogie mounted and Category 3 Axle mounted). For line protection devices the Category 1 is requested. It can be divided into subgroups, according to the location of the components: Class A: cubicles, subassemblies, equipment and components mounted directly on or under the car body. Class B: Anything mounted inside an equipment case which is in turn mounted directly on or under the car body. Category B should be used when it is not clear where the equipment is to be located. The figure identifies general location of equipment on railway vehicles: Category Location Description of equipment location 1 M N O Components mounted directly on to or under the car body Class A I and J 1 Class B 1 Class B 1 Class B D K and E F Components mounted into an underframe internal cubicle which is in turn fixed to the car body Components mounted into a large internal cubicle which is in turn fixed to the car body Components mounted into subassemblies, which are mounted into a cubicle which is in turn fixed to the car body G Cubicles, subassemblies, equipment and components, which are mounted on the bogie of a railway vehicle 3 H Subassemblies, equipment and components or assemblies, which are mounted on to the axle assembly of a railway vehicle M 1 1 I N 6 F E O 1 Inside Cubicle Body 3 Bogie 4 Axle 5 Under frame cubicle 6 Subassembly 5 H D G 3 4 DIN-Rail components for rolling stock applications CDC00053D004 1/9

Reference standards 1 All ABB products available in this catalogue are compliant not only with the main standards for the railways sector but fulfill the requirements of the most important and demanding international standards for household and industrial installations. The scope of these standards is reported below: IEC/EN 60898-1: applies to a.c. air-break circuit-breakers for operation at 50 Hz or 60 Hz, having a rated voltage not exceeding 440 V (between phases), a rated not exceeding 15 A and a rated short-circuit capacity not exceeding 5000 A. These MCBs are intended for the protection against overs of wiring installations of buildings and similar applications; they are designed for use by uninstructed people and for not being maintained. IEC/EN 60898-: gives additional requirements for circuitbreakers which are suitable for operation with direct, and have a rated d.c. voltage not exceeding 0 V for singlepole and 440 V for two-pole circuit-breakers, a rated not exceeding 15 A and a rated d.c. short-circuit capacity not exceeding 10 000 A. IEC/EN 61009: apply to residual operated circuit breakers with integral over protection for household and similar uses (RCBOs), for rated voltages not exceeding 440 V AC with rated frequencies of 50 Hz, 60 Hz or 50/60 Hz and rated s not exceeding 15 A and rated short circuit capacities not exceeding 5 000 A for operation at 50 Hz or 60 Hz. GOST 919-88 Electrical Traction Devices General Requirements: Another important standard for the traction railways sector is the GOST 919-88 Electrical Traction Devices - General Requirements, a local standard for the Russian market. This approval is required for the development of the trains that will travel in Russia. This Standard applies to electrical traction devices designed for operation on rolling stock of rail transport or on trolley buses. It does not applies to electrical traction devices operating in explosive or chemically corrosive environments. IEC/EN 60947-: applies to low voltage circuit breakers (MCBs) for use in industrial and similar applications. In particular the standards refer to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC; it also contains additional requirements for integrally fused circuit-breakers. The table resumes the reference standard available for each product families included in the catalog: Product IEC/EN 60898-1 IEC/EN 60898- IEC/EN 60947- IEC/EN 61009 GOST 919-88 name S 00 MT X X X S 00 MT UC X X X S 00 M UC X X X S 00 P X X X S 80 UC X X X S 800S X X X S 800S UC X X S500 UC X X DS01 T X X 1/10 CDC00053D004 DIN-Rail components for rolling stock applications

DIN-Rail components for rolling stock applications Miniature circuit breakers Miniature circuit breakers Selection tables MCBs S 00 S 00 MT series, 10 ka 6 S 00 MT UC series, 10 ka 4 S 00 M UC series, 10 ka 34 S 00 P series, 15/5 ka 46 MCBs S 80 S 80 UC series, AC/DC 64 MCBs S 800 S 800 S series, 50 ka 7 S 800 S UC series, 50 ka 88 MCBs S 500 S 500 UC series 98 DIN-Rail components for rolling stock applications CDC00053D004 /1

Miniature circuit-breakers Selection table S00 MT S00 MT UC S00 M UC S00 P Hazard Level acc. to EN 45545- R6/HL3 R6/HL3 R6/HL3 R6/HL3 I value - NF 16-101/10 I I I3 I1 F value - NF 16-101/10 F3 F3 F F1 Exigence - NF 16-101/10 3 3 4 Shock and vibration - IEC 61373 Category 1 Category 1 Category 1 Category 1 - Class A/B - Body mounted - Class A/B - Body mounted - Class A/B - Body mounted - Class A/B - Body mounted GOST 919-88 approval Yes Yes Yes Yes 1P, P, 3P, 4P, 1P, P, 3P, 4P 1P, P, 3P, 4P 1P, P, 3P, 4P, 1P+N, 3P+N 1P+N, 3P+N Characteristics B, C,D, K, Z B, C, K, Z B, C, K, Z B, C, D, K, Z (A) 0. 63 0. 63 0. 63 0. 5 3 40 50 63 Breaking capacity ka Nr. Poles U e [V] IEC/EN 60898 I cn 30/400 10 10 5 15 15 IEC/EN 60947- I cu 1, 1+N 133 5 40 5 5 Alternating 30 15 5 15 15 53, 3, 4 30 5 10/6 10/6 40 5 5 400 15 5 15 15 440 10/6 10/6, 3, 4 500 690 I cs 1, 1+N 133 18.7 0 18.7 18.7 30 11. 1.5 11. 7.5 53 7.5/6 7.5/6, 3, 4 30 18.7 0 18.7 18.7 400 11. 1.5 11. 7.5 440 7.5/6 7.5/6, 3, 4 500 690 / CDC00053D004 DIN-Rail components for rolling stock applications

S80 UC S800S S800S UC S500 UC R6/HL3 R6/HL3 R6/HL3 R6/HL3 I1 I3 I3 I F1 F F F0 4 4 Category 1 - Class A/B - Body mounted Category 1 - Class B - Body mounted Category 1 - Class B - Body mounted Category 1 - Class A/B - Body mounted Yes Yes Yes Yes 1P, P, 3P, 4P 1P, P, 3P, 4P 1P, P, 3P, 4P 1P, P, 3P, 4P B, K, Z K, Z B, C, K UCB, UCK K 0. 40 50 63 6 15 10 15 adjustable 0.1 3 /.8 11 / 10 45 5 (10-80 A) 10 6 6 4,5 50 10 6 50 6 4,5 50 15 (not for all rated s) 6 (not for all rated s) 7,5 6 6 4,5 40 7,5 6 40 6 4,5 40 11 (not for all rated s) 4 (not for all rated s) DIN-Rail components for rolling stock applications CDC00053D004 /3

Miniature circuit-breakers Selection table S00 MT S00 MT UC S00 M UC S00 P IEC/EN 60947- I cu 1, 1+N 4 Direct T=I/R 5ms 60 10 15 10 10 for all series, 15 except S80 UC 0 10 10 and S800S-UC, 50 where T=I/R<15ms 48 15 10 15 10 10 50 440 10 10 500 800 3, 4 375 500 750 100 I cs 1, 1+N 4 60 10 15 10 10 15 0 10 10 50 48 15 10 15 10 10 50 440 10 10 500 800 3, 4 375 500 750 100 /4 CDC00053D004 DIN-Rail components for rolling stock applications

S80 UC S800S S800S UC S500 UC 6 4,5 30 50 30 6 4,5 30 50 30 30 (3 poles) 30 (4 poles) 50 50 50 30 6 4,5 30 50 6 4,5 30 50 30 (3 poles) 50 30 (4 poles) 50 50 DIN-Rail components for rolling stock applications CDC00053D004 /5

MCB S 00 MT. The details make the difference A range designed for rolling stock equipments Twin terminal for separate feeding of busbar and conductor. IP0 - finger safety. Easy product name, easy identification, easy life. Quick identification thanks to EAN marking. Captive screws: don t loose what s important for you. Wide range of accessories are available for rolling stock applications. /6 CDC00053D004 DIN-Rail components for rolling stock applications

Dedicated materials for rolling stock application In the S00 MT range of MCBs for traction, specific materials are used that are classified with an hazard level R6/HL3 according to EN 45545-. Plastic materials are also classified I-F3 according the NF F 16-101/10 ( Railway Rolling Stock Fire Behavior-Choice of Materials and Railway Rolling Stock Fire Behavior- Choice of Materials, Application to Electrical Equipment ) thus responding to exigence 3. Shock and vibration resistance Additionally to the high quality standards and the fl ammability requirements, rail applications have specifi c demands that have to be to fulfi lled like resistance to shocks and vibrations. The resistance to vibrations and shocks of MCBs S 00 MT has been positively tested according to: IEC 61373 010 05 Edition.0 Rolling stock equipment Shock and vibration tests considering Category 1, Class A and Class B. Open to all sides All devices can be supplied from top or bottom either with cables or busbars. High-quality terminal system The integrated captive terminals and cable connection screws facilitate every electrician s life. ABB guarantees highest safety standards. The certification according to EN 41140 stands for protection against electric shock. And the certification according to the DIN EN 50 74 stands for terminals that are safe from touch by the back of the hand and the finger. The high safety standards become clear through the integrated and failsafe cable connecting terminals. Contact position indication All System pro M compact MCBs are suited with a contact position indication (CPI) on the toggle. You can easily identify, if the MCB is in the ON or the OFF position easy and safe maintenance work is possible. Advanced features Auxiliary switches SC-H10 (1 NO) and SC-H01 (1 NC) can be retrofi tted. They can be mounted individually and without modifi cation of the existing busbar. At the same time, the supply of the MCB remains unaffected. DIN-Rail components for rolling stock applications CDC00053D004 /7

MCBs S 00 MT series technical features S00 MT Standards Product Standard IEC/EN 60898-1, IEC/EN 60947- CDC01008S0014 Hazard level acc. to EN 45545- Classifi cation according to NF F 16-101/10 Resistance to shocks and vibrations R6/HL3 I / F3 (Exigence 3) Category 1 - Class A/B - body mounted S 01 MT acc. to IEC 61373 GOST 919-88 approval Yes General data Poles 1P, P, 3P, 4P, 1P+N, 3P+N Tripping characteristics B, C, D, K, Z A 0.5 63 A frequency f Hz 50/60 Hz insulation voltage U i acc. to IEC/EN 60664-1 Overvoltage category V 50 V AC (phase to ground), 440 V AC (phase to phase) III Pollution degree 3 Data acc. to IEC/EN 60898-1 operational voltage U n V 1P: 30/400 V AC; 1P+N: 30 V AC; 4P: 400 V AC; 3P+N: 400 V AC Max. power frequency recovery voltage (U max ) V 1P: 53 V AC; 1P+N: 53 V AC; 4P: 440 V AC; 3P+N: 440 V AC 1P: 66 V DC; P: 15 V DC Min. operating voltage V 1 V AC - 1 V DC short-circuit capacity I cn ka 10 ka Energy limiting class (B, C up to 40 A) 3 impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6, kv at sea level; 5 kv at.000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C B, C, D: 30 C Electrical endurance ops. < 3A: 0.000 ops (AC); 3A: 10.000 ops. (AC); 1.000 ops (DC) 1 cycle (s - ON, 13s - OFF, 3A), 1 cycle (s - ON, 8s - OFF, 3A) Data acc. to IEC/EN 60947- operational voltage U e V 1P: 30 V AC; 1P+N: 30 V AC; 4P: 400 V AC; 3P+N: 400 V AC Max. power frequency recovery voltage (U max ) V 1P: 53 V AC; 1P+N: 53 V AC; 4P: 440 V AC; 3P+N: 440 V AC 1P: 66 V DC; P: 15 V DC Min. operating voltage V 1 V AC - 1 V DC ultimate short-circuit breaking capacity I cu ka 40 A: 15 ka; 50,63 A: 10 ka service short-circuit breaking capacity I cs ka 40 A: 11. ka; 50,63 A: 7.5 ka impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at,000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C B, C, D: 55 C; K, Z: 0 C Electrical endurance ops. < 3A: 0.000 ops (AC); 3A: 10.000 ops. (AC); 1.000 ops (DC) 1 cycle (s - ON, 13s - OFF, 3A), 1 cycle (s - ON, 8s - OFF, 3A) /8 CDC00053D004 DIN-Rail components for rolling stock applications

S00 MT Mechanical Housing Insulation group I, RAL 7035 data Toggle Insulation group II, black, sealable Contact position indicator Marking on toggle (I ON/ 0 OFF) Protection degree acc. to EN 6059 IP0 (also fulfilling the req. acc. to the protection degree IPXXB); IP40 in enclosure with cover Mechanical endurance ops. 0,000 ops Shock resistance acc. to IEC/EN 60068--7 30g - 3 shocks - 11ms Vibration resistance acc. to IEC/EN 60068--6 5g - 0 cycles at 5 150 5 Hz with load 0,8 Environmental conditions (damp heat) C/RH 8 cycles with 55 C/90-96% and 5 C/95-100% acc. to IEC/EN 60068--30 Ambient temperature (with daily average +35 C) C -5 +55 C Storage temperature C -40 +70 C Installation Terminal type failsafe bi-directional cylinder-lift terminal Cross-section of conductors (top/bottom) mm 5 mm²/5 mm² Cross-section of busbars mm 10 mm²/10 mm² Tightening torque Nm.8 Nm Screwdriver No. Pozidriv Mounting On DIN-Rail 35mm acc. to EN 60715 by fast clip Mounting position any Supply optional Dimensions Mounting dimensions acc. to DIN 43880 Mounting dimension 1 and weight Pole dimensions (H x D x W) mm 88 x 69 x 17.5 mm Pole weight g approx. 15 g Combination with auxiliary elements See table page 4/4 DIN-Rail components for rolling stock applications CDC00053D004 /9

MCBs S 00 series MT 10000, B characteristic S 01 MT CDC0114S0010 S 00 MT, B characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and large length of cables in TN and IT systems. Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =10 ka 4016779 CDC01043S0011 A EAN Type code Order code 1 6 87616 S01MT-B6 CDS71006R0065 0.15 10 10 8763 S01MT-B10 CDS71006R0105 0.15 10 13 87630 S01MT-B13 CDS71006R0135 0.15 10 S 0 MT 16 87647 S01MT-B16 CDS71006R0165 0.15 10 0 87654 S01MT-B0 CDS71006R005 0.15 10 5 87661 S01MT-B5 CDS71006R055 0.15 10 3 87678 S01MT-B3 CDS71006R035 0.15 10 40 87685 S01MT-B40 CDS71006R0405 0.15 10 50 8769 S01MT-B50 CDS71006R0505 0.15 10 CDC01044S0011 63 876308 S01MT-B63 CDS71006R0635 0.15 10 4016779 S 03 MT A EAN Type code Order code 6 875134 S0MT-B6 CDS7006R0065 0.50 5 10 875141 S0MT-B10 CDS7006R0105 0.50 5 13 875158 S0MT-B13 CDS7006R0135 0.50 5 16 875165 S0MT-B16 CDS7006R0165 0.50 5 0 87517 S0MT-B0 CDS7006R005 0.50 5 5 875189 S0MT-B5 CDS7006R055 0.50 5 3 875196 S0MT-B3 CDS7006R035 0.50 5 40 8750 S0MT-B40 CDS7006R0405 0.50 5 50 87519 S0MT-B50 CDS7006R0505 0.50 5 63 8756 S0MT-B63 CDS7006R0635 0.50 5 4016779 A EAN Type code Order code 3 6 730500 S03MT-B6 CDS73006R0065 0.375 1 45318 10 871631 S03MT-B10 CDS73006R0105 0.375 1 13 871648 S03MT-B13 CDS73006R0135 0.375 1 16 871655 S03MT-B16 CDS73006R0165 0.375 1 0 87166 S03MT-B0 CDS73006R005 0.375 1 5 871679 S03MT-B5 CDS73006R055 0.375 1 3 871686 S03MT-B3 CDS73006R035 0.375 1 40 871693 S03MT-B40 CDS73006R0405 0.375 1 50 871709 S03MT-B50 CDS73006R0505 0.375 1 63 871716 S03MT-B63 CDS73006R0635 0.375 1 /10 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 CDC01040S0011 A EAN Type code Order code 4 6 87173 S04MT-B6 CDS74006R0065 0.500 1 10 871730 S04MT-B10 CDS74006R0105 0.500 1 13 871747 S04MT-B13 CDS74006R0135 0.500 1 S 04 MT 16 871754 S04MT-B16 CDS74006R0165 0.500 1 0 871761 S04MT-B0 CDS74006R005 0.500 1 5 871778 S04MT-B5 CDS74006R055 0.500 1 3 871785 S04MT-B3 CDS74006R035 0.500 1 40 87179 S04MT-B40 CDS74006R0405 0.500 1 50 871808 S04MT-B50 CDS74006R0505 0.500 1 CDC0104S0011 63 871815 S04MT-B63 CDS74006R0635 0.500 1 With disconnecting neutral NA S 01 MT NA 4016779 A EAN Type code Order code kg pc. 1+NA 6 87533 S01MT-B6NA CDS71106R0065 0.50 5 10 87540 S01MT-B10NA CDS71106R0105 0.50 5 CDC01041S0011 13 87557 S01MT-B13NA CDS71106R0135 0.50 5 16 87564 S01MT-B16NA CDS71106R0165 0.50 5 0 87571 S01MT-B0NA CDS71106R005 0.50 5 S 03 MT NA 5 87588 S01MT-B5NA CDS71106R055 0.50 5 3 87595 S01MT-B3NA CDS71106R035 0.50 5 40 875301 S01MT-B40NA CDS71106R0405 0.50 5 50 875318 S01MT-B50NA CDS71106R0505 0.50 5 63 87535 S01MT-B63NA CDS71106R0635 0.50 5 4016779 A EAN Type code Order code 3+NA 6 8718 S03MT-B6NA CDS73106R0065 0.500 1 10 871839 S03MT-B10NA CDS73106R0105 0.500 1 13 871846 S03MT-B13NA CDS73106R0135 0.500 1 16 871853 S03MT-B16NA CDS73106R0165 0.500 1 0 871860 S03MT-B0NA CDS73106R005 0.500 1 5 871877 S03MT-B5NA CDS73106R055 0.500 1 3 871884 S03MT-B3NA CDS73106R035 0.500 1 40 871891 S03MT-B40NA CDS73106R0405 0.500 1 50 871907 S03MT-B50NA CDS73106R0505 0.500 1 63 871914 S03MT-B63NA CDS73106R0635 0.580 1 DIN-Rail components for rolling stock applications CDC00053D004 /11

MCBs S 00 series MT 10000, C characteristic S 01 MT CDC0114S0010 S 00 MT, C characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for resistive and inductive loads with low inrush. Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =10 ka 4016779 S 0 MT CDC01043S0011 A EAN Type code Order code 1 0.5 76593 S01MT-C0,5 CDS71006R0984 0.15 10 1 765435 S01MT-C1 CDS71006R0014 0.15 10 1.6 765916 S01MT-C1,6 CDS71006R0974 0.15 10 76544 S01MT-C CDS71006R004 0.15 10 3 765459 S01MT-C3 CDS71006R0034 0.15 10 4 765466 S01MT-C4 CDS71006R0044 0.15 10 6 765473 S01MT-C6 CDS71006R0064 0.15 10 8 765480 S01MT-C8 CDS71006R0084 0.15 10 10 765497 S01MT-C10 CDS71006R0104 0.15 10 13 765503 S01MT-C13 CDS71006R0134 0.15 10 16 765534 S01MT-C16 CDS71006R0164 0.15 10 0 765541 S01MT-C0 CDS71006R004 0.15 10 5 76557 S01MT-C5 CDS71006R054 0.15 10 3 765640 S01MT-C3 CDS71006R034 0.15 10 40 765695 S01MT-C40 CDS71006R0404 0.15 10 50 765794 S01MT-C50 CDS71006R0504 0.15 10 63 765909 S01MT-C63 CDS71006R0634 0.15 10 4016779 A EAN Type code Order code 0.5 767880 S0MT-C0,5 CDS7006R0984 0.50 5 1 76739 S0MT-C1 CDS7006R0014 0.50 5 1.6 767873 S0MT-C1,6 CDS7006R0974 0.50 5 767408 S0MT-C CDS7006R004 0.50 5 3 767415 S0MT-C3 CDS7006R0034 0.50 5 4 7674 S0MT-C4 CDS7006R0044 0.50 5 6 767439 S0MT-C6 CDS7006R0064 0.50 5 8 767446 S0MT-C8 CDS7006R0084 0.50 5 10 767453 S0MT-C10 CDS7006R0104 0.50 5 13 767460 S0MT-C13 CDS7006R0134 0.50 5 16 767491 S0MT-C16 CDS7006R0164 0.50 5 0 767507 S0MT-C0 CDS7006R004 0.50 5 5 767538 S0MT-C5 CDS7006R054 0.50 5 3 767606 S0MT-C3 CDS7006R034 0.50 5 40 767651 S0MT-C40 CDS7006R0404 0.50 5 50 767750 S0MT-C50 CDS7006R0504 0.50 5 63 767866 S0MT-C63 CDS7006R0634 0.50 5 /1 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 CDC01044S0011 A EAN Type code Order code 3 0.5 7704 S03MT-C0,5 CDS73006R0984 0.375 1 1 769938 S03MT-C1 CDS73006R0014 0.375 1 1.6 770415 S03MT-C1,6 CDS73006R0974 0.375 1 S 03 MT 769945 S03MT-C CDS73006R004 0.375 1 3 76995 S03MT-C3 CDS73006R0034 0.375 1 4 769969 S03MT-C4 CDS73006R0044 0.375 1 6 769976 S03MT-C6 CDS73006R0064 0.375 1 8 769983 S03MT-C8 CDS73006R0084 0.375 1 10 769990 S03MT-C10 CDS73006R0104 0.375 1 CDC01040S0011 13 77000 S03MT-C13 CDS73006R0134 0.375 1 16 770033 S03MT-C16 CDS73006R0164 0.375 1 0 770040 S03MT-C0 CDS73006R004 0.375 1 5 770071 S03MT-C5 CDS73006R054 0.375 1 S 04 MT 3 770149 S03MT-C3 CDS73006R034 0.375 1 40 770194 S03MT-C40 CDS73006R0404 0.375 1 50 77093 S03MT-C50 CDS73006R0504 0.375 1 63 770408 S03MT-C63 CDS73006R0634 0.375 1 4016779 A EAN Type code Order code 4 0.5 77389 S04MT-C0,5 CDS74006R0984 0.500 1 1 771894 S04MT-C1 CDS74006R0014 0.500 1 1.6 7737 S04MT-C1,6 CDS74006R0974 0.500 1 771900 S04MT-C CDS74006R004 0.500 1 3 771917 S04MT-C3 CDS74006R0034 0.500 1 4 77194 S04MT-C4 CDS74006R0044 0.500 1 6 771931 S04MT-C6 CDS74006R0064 0.500 1 8 771948 S04MT-C8 CDS74006R0084 0.500 1 10 771955 S04MT-C10 CDS74006R0104 0.500 1 13 77196 S04MT-C13 CDS74006R0134 0.500 1 16 771993 S04MT-C16 CDS74006R0164 0.500 1 0 77006 S04MT-C0 CDS74006R004 0.500 1 5 77037 S04MT-C5 CDS74006R054 0.500 1 3 77105 S04MT-C3 CDS74006R034 0.500 1 40 77150 S04MT-C40 CDS74006R0404 0.500 1 50 7759 S04MT-C50 CDS74006R0504 0.500 1 63 77365 S04MT-C63 CDS74006R0634 0.500 1 DIN-Rail components for rolling stock applications CDC00053D004 /13

MCBs S 00 series MT 10000, C characteristic With disconnecting neutral NA CDC0104S0011 4016779 A EAN Type code Order code 1+NA 0.5 767385 S01MT-C0,5NA CDS71106R0984 0.50 5 1 766937 S01MT-C1NA CDS71106R0014 0.50 5 S 01 MT NA 1.6 767378 S01MT-C1,6NA CDS71106R0974 0.50 5 766944 S01MT-CNA CDS71106R004 0.50 5 3 766951 S01MT-C3NA CDS71106R0034 0.50 5 4 766968 S01MT-C4NA CDS71106R0044 0.50 5 6 766975 S01MT-C6NA CDS71106R0064 0.50 5 CDC01041S0011 8 76698 S01MT-C8NA CDS71106R0084 0.50 5 10 766999 S01MT-C10NA CDS71106R0104 0.50 5 13 76700 S01MT-C13NA CDS71106R0134 0.50 5 16 767033 S01MT-C16NA CDS71106R0164 0.50 5 S 03 MT NA 0 767040 S01MT-C0NA CDS71106R004 0.50 5 5 767071 S01MT-C5NA CDS71106R054 0.50 5 3 767149 S01MT-C3NA CDS71106R034 0.50 5 40 767194 S01MT-C40NA CDS71106R0404 0.50 5 50 769891 S01MT-C50NA CDS71106R0504 0.50 5 63 76991 S01MT-C63NA CDS71106R0634 0.50 5 4016779 A EAN Type code Order code 3+NA 0.5 771887 S03MT-C0,5NA CDS73106R0984 0.500 1 1 771436 S03MT-C1NA CDS73106R0014 0.500 1 1.6 771870 S03MT-C1,6NA CDS73106R0974 0.500 1 771443 S03MT-CNA CDS73106R004 0.500 1 3 771450 S03MT-C3NA CDS73106R0034 0.500 1 4 771467 S03MT-C4NA CDS73106R0044 0.500 1 6 771474 S03MT-C6NA CDS73106R0064 0.500 1 8 771481 S03MT-C8NA CDS73106R0084 0.500 1 10 771498 S03MT-C10NA CDS73106R0104 0.500 1 13 771504 S03MT-C13NA CDS73106R0134 0.500 1 16 771535 S03MT-C16NA CDS73106R0164 0.500 1 0 77154 S03MT-C0NA CDS73106R004 0.500 1 5 771573 S03MT-C5NA CDS73106R054 0.500 1 3 771641 S03MT-C3NA CDS73106R034 0.500 1 40 771696 S03MT-C40NA CDS73106R0404 0.500 1 50 774390 S03MT-C50NA CDS73106R0504 0.580 1 63 77440 S03MT-C63NA CDS73106R0634 0.580 1 /14 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 00 series MT 10000, D characteristic S 01 MT CDC0114S0010 S 00 MT-D characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for circuits which supply loads with high inrush at the circuit closing (LV/LV transformers, breakdown lamps). Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =10 ka 4016779 S 0 MT CDC01043S0011 A EAN Type code Order code 1 0.5 876315 S01MT-D0,5 CDS71006R0981 0.15 10 1 8763 S01MT-D1 CDS71006R0011 0.15 10 1.6 876339 S01MT-D1,6 CDS71006R0971 0.15 10 876346 S01MT-D CDS71006R001 0.15 10 3 876353 S01MT-D3 CDS71006R0031 0.15 10 4 876360 S01MT-D4 CDS71006R0041 0.15 10 6 876377 S01MT-D6 CDS71006R0061 0.15 10 8 876384 S01MT-D8 CDS71006R0081 0.15 10 10 876391 S01MT-D10 CDS71006R0101 0.15 10 13 876407 S01MT-D13 CDS71006R0131 0.15 10 16 876414 S01MT-D16 CDS71006R0161 0.15 10 0 87641 S01MT-D0 CDS71006R001 0.15 10 5 876438 S01MT-D5 CDS71006R051 0.15 10 3 876445 S01MT-D3 CDS71006R031 0.15 10 40 87645 S01MT-D40 CDS71006R0401 0.15 10 50 876469 S01MT-D50 CDS71006R0501 0.15 10 63 876476 S01MT-D63 CDS71006R0631 0.15 10 4016779 A EAN Type code Order code 0.5 87533 S0MT-D0,5 CDS7006R0981 0.50 5 1 875349 S0MT-D1 CDS7006R0011 0.50 5 1.6 875356 S0MT-D1,6 CDS7006R0971 0.50 5 875363 S0MT-D CDS7006R001 0.50 5 3 875370 S0MT-D3 CDS7006R0031 0.50 5 4 875387 S0MT-D4 CDS7006R0041 0.50 5 6 875394 S0MT-D6 CDS7006R0061 0.50 5 8 875400 S0MT-D8 CDS7006R0081 0.50 5 10 875417 S0MT-D10 CDS7006R0101 0.50 5 13 87544 S0MT-D13 CDS7006R0131 0.50 5 16 875431 S0MT-D16 CDS7006R0161 0.50 5 0 875448 S0MT-D0 CDS7006R001 0.50 5 5 875455 S0MT-D5 CDS7006R051 0.50 5 3 87546 S0MT-D3 CDS7006R031 0.50 5 40 875479 S0MT-D40 CDS7006R0401 0.50 5 50 875486 S0MT-D50 CDS7006R0501 0.50 5 63 875493 S0MT-D63 CDS7006R0631 0.50 5 DIN-Rail components for rolling stock applications CDC00053D004 /15

MCBs S 00 series MT 10000, D characteristic 4016779 CDC01044S0011 A EAN Type code Order code 3 0.5 87191 S03MT-D0,5 CDS73006R0981 0.375 1 1 871938 S03MT-D1 CDS73006R0011 0.375 1 1.6 871945 S03MT-D1,6 CDS73006R0971 0.375 1 S 03 MT 87195 S03MT-D CDS73006R001 0.375 1 3 871969 S03MT-D3 CDS73006R0031 0.375 1 4 871976 S03MT-D4 CDS73006R0041 0.375 1 6 871983 S03MT-D6 CDS73006R0061 0.375 1 8 871990 S03MT-D8 CDS73006R0081 0.375 1 10 87003 S03MT-D10 CDS73006R0101 0.375 1 CDC01040S0011 13 87010 S03MT-D13 CDS73006R0131 0.375 1 16 8707 S03MT-D16 CDS73006R0161 0.375 1 0 87034 S03MT-D0 CDS73006R001 0.375 1 5 87041 S03MT-D5 CDS73006R051 0.375 1 S 04 MT 3 87058 S03MT-D3 CDS73006R031 0.375 1 40 87065 S03MT-D40 CDS73006R0401 0.375 1 50 8707 S03MT-D50 CDS73006R0501 0.375 1 63 87089 S03MT-D63 CDS73006R0631 0.375 1 4016779 A EAN Type code Order code 4 0.5 87096 S04MT-D0,5 CDS74006R0981 0.500 1 1 8710 S04MT-D1 CDS74006R0011 0.500 1 1.6 87119 S04MT-D1,6 CDS74006R0971 0.500 1 8716 S04MT-D CDS74006R001 0.500 1 3 87133 S04MT-D3 CDS74006R0031 0.500 1 4 87140 S04MT-D4 CDS74006R0041 0.500 1 6 87157 S04MT-D6 CDS74006R0061 0.500 1 8 87164 S04MT-D8 CDS74006R0081 0.500 1 10 87171 S04MT-D10 CDS74006R0101 0.500 1 13 87188 S04MT-D13 CDS74006R0131 0.500 1 16 87195 S04MT-D16 CDS74006R0161 0.500 1 0 8701 S04MT-D0 CDS74006R001 0.500 1 5 8718 S04MT-D5 CDS74006R051 0.500 1 3 875 S04MT-D3 CDS74006R031 0.500 1 40 873 S04MT-D40 CDS74006R0401 0.500 1 50 8749 S04MT-D50 CDS74006R0501 0.500 1 63 8756 S04MT-D63 CDS74006R0631 0.500 1 /16 CDC00053D004 DIN-Rail components for rolling stock applications

With disconnecting neutral NA CDC0104S0011 4016779 A EAN Type code Order code 1+NA 0.5 875509 S01MT-D0,5NA CDS71106R0981 0.50 5 1 875516 S01MT-D1NA CDS71106R0011 0.50 5 S 01 MT NA 1.6 87553 S01MT-D1,6NA CDS71106R0971 0.50 5 875530 S01MT-DNA CDS71106R001 0.50 5 3 875547 S01MT-D3NA CDS71106R0031 0.50 5 4 875554 S01MT-D4NA CDS71106R0041 0.50 5 6 875561 S01MT-D6NA CDS71106R0061 0.50 5 CDC01041S0011 8 875578 S01MT-D8NA CDS71106R0081 0.50 5 10 875585 S01MT-D10NA CDS71106R0101 0.50 5 13 87559 S01MT-D13NA CDS71106R0131 0.50 5 16 875608 S01MT-D16NA CDS71106R0161 0.50 5 S 03 MT NA 0 875615 S01MT-D0NA CDS71106R001 0.50 5 5 8756 S01MT-D5NA CDS71106R051 0.50 5 3 875639 S01MT-D3NA CDS71106R031 0.50 5 40 875646 S01MT-D40NA CDS71106R0401 0.50 5 50 875653 S01MT-D50NA CDS71106R0501 0.90 5 63 875660 S01MT-D63NA CDS71106R0631 0.90 5 4016779 A EAN Type code Order code 3+NA 0.5 8763 S03MT-D0,5NA CDS73106R0981 0.500 1 1 8770 S03MT-D1NA CDS73106R0011 0.500 1 1.6 8787 S03MT-D1,6NA CDS73106R0971 0.500 1 8794 S03MT-DNA CDS73106R001 0.500 1 3 87300 S03MT-D3NA CDS73106R0031 0.500 1 4 87317 S03MT-D4NA CDS73106R0041 0.500 1 6 8734 S03MT-D6NA CDS73106R0061 0.500 1 8 87331 S03MT-D8NA CDS73106R0081 0.500 1 10 87348 S03MT-D10NA CDS73106R0101 0.500 1 13 87355 S03MT-D13NA CDS73106R0131 0.500 1 16 8736 S03MT-D16NA CDS73106R0161 0.500 1 0 87379 S03MT-D0NA CDS73106R001 0.500 1 5 87386 S03MT-D5NA CDS73106R051 0.500 1 3 87393 S03MT-D3NA CDS73106R031 0.500 1 40 87409 S03MT-D40NA CDS73106R0401 0.500 1 50 87416 S03MT-D50NA CDS73106R0501 0.580 1 63 8743 S03MT-D63NA CDS73106R0631 0.580 1 DIN-Rail components for rolling stock applications CDC00053D004 /17

MCBs S 00 series MT 10000, K characteristic S 01 MT CDC0114S0010 CDC01043S0011 S 00 MT, K (power) characteristic Function: protection and control of the circuits like motors, transformer and auxiliary circuits, against overloads and short-circuits. Advantages: no nuisance tripping in the case of functional peak s up to 10xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu =15 ka for 0.5 A 40 A I cu =10 ka for 50 A 63 A 4016779 S 0 MT A EAN Type code Order code kg pc. 1 0.5 765510 S01MT-K0,5 CDS71006R0157 0.15 10 1 765558 S01MT-K1 CDS71006R017 0.15 10 1.6 765589 S01MT-K1,6 CDS71006R057 0.15 10 76560 S01MT-K CDS71006R077 0.15 10 3 76566 S01MT-K3 CDS71006R0317 0.15 10 4 765657 S01MT-K4 CDS71006R0337 0.15 10 6 765671 S01MT-K6 CDS71006R0377 0.15 10 8 765701 S01MT-K8 CDS71006R0407 0.15 10 10 76575 S01MT-K10 CDS71006R047 0.15 10 13 765749 S01MT-K13 CDS71006R0447 0.15 10 16 765756 S01MT-K16 CDS71006R0467 0.15 10 0 765770 S01MT-K0 CDS71006R0487 0.15 10 5 765800 S01MT-K5 CDS71006R0517 0.15 10 3 76584 S01MT-K3 CDS71006R0537 0.15 10 40 765848 S01MT-K40 CDS71006R0557 0.15 10 50 76586 S01MT-K50 CDS71006R0577 0.15 10 63 765886 S01MT-K63 CDS71006R0607 0.15 10 4016779 A EAN Type code Order code 0.5 767477 S0MT-K0,5 CDS7006R0157 0.50 5 1 767514 S0MT-K1 CDS7006R017 0.50 5 1.6 767545 S0MT-K1,6 CDS7006R057 0.50 5 767569 S0MT-K CDS7006R077 0.50 5 3 767583 S0MT-K3 CDS7006R0317 0.50 5 4 767613 S0MT-K4 CDS7006R0337 0.50 5 6 767637 S0MT-K6 CDS7006R0377 0.50 5 8 767668 S0MT-K8 CDS7006R0407 0.50 5 10 76768 S0MT-K10 CDS7006R047 0.50 5 13 767705 S0MT-K13 CDS7006R0447 0.50 5 16 76771 S0MT-K16 CDS7006R0467 0.50 5 0 767736 S0MT-K0 CDS7006R0487 0.50 5 5 767767 S0MT-K5 CDS7006R0517 0.50 5 3 767781 S0MT-K3 CDS7006R0537 0.50 5 40 767804 S0MT-K40 CDS7006R0557 0.50 5 50 76788 S0MT-K50 CDS7006R0577 0.50 5 63 76784 S0MT-K63 CDS7006R0607 0.50 5 /18 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 CDC01044S0011 A EAN Type code Order code 3 0.5 770019 S03MT-K0,5 CDS73006R0157 0.375 1 1 770057 S03MT-K1 CDS73006R017 0.375 1 1.6 770088 S03MT-K1,6 CDS73006R057 0.375 1 S 03 MT 770101 S03MT-K CDS73006R077 0.375 1 3 77015 S03MT-K3 CDS73006R0317 0.375 1 4 770156 S03MT-K4 CDS73006R0337 0.375 1 6 770170 S03MT-K6 CDS73006R0377 0.375 1 8 77000 S03MT-K8 CDS73006R0407 0.375 1 10 7704 S03MT-K10 CDS73006R047 0.375 1 CDC01040S0011 13 77048 S03MT-K13 CDS73006R0447 0.375 1 16 77055 S03MT-K16 CDS73006R0467 0.375 1 0 77079 S03MT-K0 CDS73006R0487 0.375 1 5 770309 S03MT-K5 CDS73006R0517 0.375 1 S 04 MT 3 77033 S03MT-K3 CDS73006R0537 0.375 1 40 770347 S03MT-K40 CDS73006R0557 0.375 1 50 770361 S03MT-K50 CDS73006R0577 0.375 1 63 770385 S03MT-K63 CDS73006R0607 0.375 1 4016779 A EAN Type code Order code 4 0.5 771979 S04MT-K0,5 CDS74006R0157 0.500 1 1 77013 S04MT-K1 CDS74006R017 0.500 1 1.6 77044 S04MT-K1,6 CDS74006R057 0.500 1 77068 S04MT-K CDS74006R077 0.500 1 3 7708 S04MT-K3 CDS74006R0317 0.500 1 4 7711 S04MT-K4 CDS74006R0337 0.500 1 6 77136 S04MT-K6 CDS74006R0377 0.500 1 8 77167 S04MT-K8 CDS74006R0407 0.500 1 10 77181 S04MT-K10 CDS74006R047 0.500 1 13 7704 S04MT-K13 CDS74006R0447 0.500 1 16 7711 S04MT-K16 CDS74006R0467 0.500 1 0 7735 S04MT-K0 CDS74006R0487 0.500 1 5 7766 S04MT-K5 CDS74006R0517 0.500 1 3 7780 S04MT-K3 CDS74006R0537 0.500 1 40 77303 S04MT-K40 CDS74006R0557 0.500 1 50 7737 S04MT-K50 CDS74006R0577 0.500 1 63 77341 S04MT-K63 CDS74006R0607 0.500 1 DIN-Rail components for rolling stock applications CDC00053D004 /19

MCBs S 00 series MT 10000, K characteristic With disconnecting neutral NA CDC0104S0011 4016779 A EAN Type code Order code 1+NA 0.5 767019 S01MT-K0,5NA CDS71106R0157 0.50 5 1 767057 S01MT-K1NA CDS71106R017 0.50 5 S 01 MT NA 1.6 767088 S01MT-K1,6NA CDS71106R057 0.50 5 767101 S01MT-KNA CDS71106R077 0.50 5 3 76715 S01MT-K3NA CDS71106R0317 0.50 5 4 767156 S01MT-K4NA CDS71106R0337 0.50 5 6 767170 S01MT-K6NA CDS71106R0377 0.50 5 CDC01041S0011 8 76700 S01MT-K8NA CDS71106R0407 0.50 5 10 7674 S01MT-K10NA CDS71106R047 0.50 5 13 76748 S01MT-K13NA CDS71106R0447 0.50 5 16 76755 S01MT-K16NA CDS71106R0467 0.50 5 S 03 MT NA 0 76779 S01MT-K0NA CDS71106R0487 0.50 5 5 76793 S01MT-K5NA CDS71106R0517 0.50 5 3 767316 S01MT-K3NA CDS71106R0537 0.50 5 40 767330 S01MT-K40NA CDS71106R0557 0.50 5 50 769907 S01MT-K50NA CDS71106R0577 0.50 5 63 769914 S01MT-K63NA CDS71106R0607 0.50 5 4016779 A EAN Type code Order code 3+NA 0.5 771511 S03MT-K0,5NA CDS73106R0157 0.500 1 1 771559 S03MT-K1NA CDS73106R017 0.500 1 1.6 771580 S03MT-K1,6NA CDS73106R057 0.500 1 771603 S03MT-KNA CDS73106R077 0.500 1 3 77167 S03MT-K3NA CDS73106R0317 0.500 1 4 771658 S03MT-K4NA CDS73106R0337 0.500 1 6 77167 S03MT-K6NA CDS73106R0377 0.500 1 8 77170 S03MT-K8NA CDS73106R0407 0.500 1 10 77176 S03MT-K10NA CDS73106R047 0.500 1 13 771740 S03MT-K13NA CDS73106R0447 0.500 1 16 771757 S03MT-K16NA CDS73106R0467 0.500 1 0 771771 S03MT-K0NA CDS73106R0487 0.500 1 5 771795 S03MT-K5NA CDS73106R0517 0.500 1 3 771818 S03MT-K3NA CDS73106R0537 0.500 1 40 77183 S03MT-K40NA CDS73106R0557 0.500 1 50 774406 S03MT-K50NA CDS73106R0577 0.500 1 63 774413 S03MT-K63NA CDS73106R0607 0.500 1 /0 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 00 series MT 10000, Z characteristic S 01 MT CDC0114S0010 S 00 MT, Z characteristic Function: protection and control of the electronic circuits against lower and long duration overloads and short-circuits. Standards: IEC/EN 60947-, VDE 0660 Part 101 Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu =10 ka (acc. to VDE 0660 Part 101) 4016779 S 0 MT CDC01043S0011 A EAN Type code Order code 1 0.5 76557 S01MT-Z0,5 CDS71006R0158 0.15 10 1 765565 S01MT-Z1 CDS71006R018 0.15 10 1.6 765596 S01MT-Z1,6 CDS71006R058 0.15 10 765619 S01MT-Z CDS71006R078 0.15 10 3 765633 S01MT-Z3 CDS71006R0318 0.15 10 4 765664 S01MT-Z4 CDS71006R0338 0.15 10 6 765688 S01MT-Z6 CDS71006R0378 0.15 10 8 765718 S01MT-Z8 CDS71006R0408 0.15 10 10 76573 S01MT-Z10 CDS71006R048 0.15 10 16 765763 S01MT-Z16 CDS71006R0468 0.15 10 0 765787 S01MT-Z0 CDS71006R0488 0.15 10 5 765817 S01MT-Z5 CDS71006R0518 0.15 10 3 765831 S01MT-Z3 CDS71006R0538 0.15 10 40 765855 S01MT-Z40 CDS71006R0558 0.15 10 50 765879 S01MT-Z50 CDS71006R0578 0.15 10 63 765893 S01MT-Z63 CDS71006R0608 0.15 10 4016779 A EAN Type code Order code 0.5 767484 S0MT-Z0,5 CDS7006R0158 0.50 5 1 76751 S0MT-Z1 CDS7006R018 0.50 5 1.6 76755 S0MT-Z1,6 CDS7006R058 0.50 5 767576 S0MT-Z CDS7006R078 0.50 5 3 767590 S0MT-Z3 CDS7006R0318 0.50 5 4 76760 S0MT-Z4 CDS7006R0338 0.50 5 6 767644 S0MT-Z6 CDS7006R0378 0.50 5 8 767675 S0MT-Z8 CDS7006R0408 0.50 5 10 767699 S0MT-Z10 CDS7006R048 0.50 5 16 76779 S0MT-Z16 CDS7006R0468 0.50 5 0 767743 S0MT-Z0 CDS7006R0488 0.50 5 5 767774 S0MT-Z5 CDS7006R0518 0.50 5 3 767798 S0MT-Z3 CDS7006R0538 0.50 5 40 767811 S0MT-Z40 CDS7006R0558 0.50 5 50 767835 S0MT-Z50 CDS7006R0578 0.50 5 63 767859 S0MT-Z63 CDS7006R0608 0.50 5 DIN-Rail components for rolling stock applications CDC00053D004 /1

MCBs S 00 series MT 10000, Z characteristic 4016779 CDC01044S0011 A EAN Type code Order code 3 0.5 77006 S03MT-Z0,5 CDS73006R0158 0.375 1 1 770064 S03MT-Z1 CDS73006R018 0.375 1 1.6 770095 S03MT-Z1,6 CDS73006R058 0.375 1 S 03 MT 770118 S03MT-Z CDS73006R078 0.375 1 3 77013 S03MT-Z3 CDS73006R0318 0.375 1 4 770163 S03MT-Z4 CDS73006R0338 0.375 1 6 770187 S03MT-Z6 CDS73006R0378 0.375 1 8 77017 S03MT-Z8 CDS73006R0408 0.375 1 10 77031 S03MT-Z10 CDS73006R048 0.375 1 CDC01040S0011 16 7706 S03MT-Z16 CDS73006R0468 0.375 1 0 77086 S03MT-Z0 CDS73006R0488 0.375 1 5 770316 S03MT-Z5 CDS73006R0518 0.375 1 3 770330 S03MT-Z3 CDS73006R0538 0.375 1 S 04 MT 40 770354 S03MT-Z40 CDS73006R0558 0.375 1 50 770378 S03MT-Z50 CDS73006R0578 0.375 1 63 77039 S03MT-Z63 CDS73006R0608 0.375 1 4016779 A EAN Type code Order code 4 0.5 771986 S04MT-Z0,5 CDS74006R0158 0.500 1 1 7700 S04MT-Z1 CDS74006R018 0.500 1 1.6 77051 S04MT-Z1,6 CDS74006R058 0.500 1 77075 S04MT-Z CDS74006R078 0.500 1 3 77099 S04MT-Z3 CDS74006R0318 0.500 1 4 7719 S04MT-Z4 CDS74006R0338 0.500 1 6 77143 S04MT-Z6 CDS74006R0378 0.500 1 8 77174 S04MT-Z8 CDS74006R0408 0.500 1 10 77198 S04MT-Z10 CDS74006R048 0.500 1 16 778 S04MT-Z16 CDS74006R0468 0.500 1 0 774 S04MT-Z0 CDS74006R0488 0.500 1 5 7773 S04MT-Z5 CDS74006R0518 0.500 1 3 7797 S04MT-Z3 CDS74006R0538 0.500 1 40 77310 S04MT-Z40 CDS74006R0558 0.500 1 50 77334 S04MT-Z50 CDS74006R0578 0.500 1 63 77358 S04MT-Z63 CDS74006R0608 0.500 1 / CDC00053D004 DIN-Rail components for rolling stock applications

With disconnecting neutral NA CDC0104S0011 4016779 A EAN Type code Order code 1+NA 0.5 76706 S01MT-Z0,5NA CDS71106R0158 0.60 5 1 767064 S01MT-Z1NA CDS71106R018 0.60 5 S 01 MT NA 1.6 767095 S01MT-Z1,6NA CDS71106R058 0.60 5 767118 S01MT-ZNA CDS71106R078 0.60 5 3 76713 S01MT-Z3NA CDS71106R0318 0.60 5 4 767163 S01MT-Z4NA CDS71106R0338 0.60 5 6 767187 S01MT-Z6NA CDS71106R0378 0.60 5 CDC01041S0011 8 76717 S01MT-Z8NA CDS71106R0408 0.60 5 10 76731 S01MT-Z10NA CDS71106R048 0.60 5 16 7676 S01MT-Z16NA CDS71106R0468 0.60 5 0 76786 S01MT-Z0NA CDS71106R0488 0.60 5 S 03 MT NA 5 767309 S01MT-Z5NA CDS71106R0518 0.60 5 3 76733 S01MT-Z3NA CDS71106R0538 0.60 5 40 767347 S01MT-Z40NA CDS71106R0558 0.60 5 50 767354 S01MT-Z50NA CDS71106R0578 0.30 5 63 767361 S01MT-Z63NA CDS71106R0608 0.30 5 4016779 A EAN Type code Order code 3+NA 0.5 77158 S03MT-Z0,5NA CDS73106R0158 0.50 1 1 771566 S03MT-Z1NA CDS73106R018 0.50 1 1.6 771597 S03MT-Z1,6NA CDS73106R058 0.50 1 771610 S03MT-ZNA CDS73106R078 0.50 1 3 771634 S03MT-Z3NA CDS73106R0318 0.50 1 4 771665 S03MT-Z4NA CDS73106R0338 0.50 1 6 771689 S03MT-Z6NA CDS73106R0378 0.50 1 8 771719 S03MT-Z8NA CDS73106R0408 0.50 1 10 771733 S03MT-Z10NA CDS73106R048 0.50 1 16 771764 S03MT-Z16NA CDS73106R0468 0.50 1 0 771788 S03MT-Z0NA CDS73106R0488 0.50 1 5 771801 S03MT-Z5NA CDS73106R0518 0.50 1 3 77185 S03MT-Z3NA CDS73106R0538 0.50 1 40 771849 S03MT-Z40NA CDS73106R0558 0.50 1 50 771856 S03MT-Z50NA CDS73106R0578 0.640 1 63 771863 S03MT-Z63NA CDS73106R0608 0.640 1 DIN-Rail components for rolling stock applications CDC00053D004 /3

MCBs S 00 MT UC series technical features S00 MT UC Standards Product Standard IEC/EN 60947- S 01 MT UC CDC01009S0014 Hazard level acc. to EN 45545- R6/HL3 Classifi cation according to I / F3 (Exigence 3) NF F 16-101/10 Resistance to shocks and vibrations Category 1 - Class A/B - Body mounted acc. to IEC 61373 GOST 919-88 approval Yes General data Poles 1P, P, 3P, 4P Tripping characteristics B, C, K, Z A 0. - 63 A frequency f Hz 0/50/60 Hz insulation voltage U i acc. to V 53 V AC (phase to ground), 440 V AC (phase to phase) IEC/EN 60664-1 Overvoltage category III Pollution degree Data acc. to IEC/EN operational voltage U e V 1P: 53 V AC, 0 V DC...4P: 440 V AC, 440 V DC 60947- Max. power frequency recovery voltage (U max ) V 1P: 66 V AC, 50 V DC...4P: 46 V AC, 500 V DC Min. operating voltage V 1 V AC 1 V DC ultimate short-circuit breaking capacity I cu ka 40 A: 10 ka (AC); 10 ka (DC) >40 A: 6 ka (AC); 10 ka (DC) service short-circuit breaking capacity I cs ka 40 A: 7.5 ka (AC); 10 ka (DC) >40 A: 6 ka (AC); 10 ka (DC) impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at,000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping C B, C: 55 C; K, Z: 0 C characteristics Electrical endurance ops. < 3 A: 0,000 ops. (AC), 3 A: 10,000 ops. (AC); 1,500 ops. (DC) /4 CDC00053D004 DIN-Rail components for rolling stock applications

S00 MT UC Mechanical Housing Insulation group I, RAL 7035 data Toggle Insulation group II, black, sealable Contact position indicator Real CPI (green OFF / red ON) Protection degree acc. to EN 6059 IP0, IP40 in enclosure with cover Mechanical endurance ops. 0,000 ops. Shock resistance acc. to IEC/EN 60068--7 5 g - shocks - 13 ms Vibration resistance acc. to IEC/EN 60068--6 5 g - 0 cycles at 5... 150... 5 Hz at 0.8 In Environmental conditions (damp heat) C/RH 8 cycles with 55 C/90-96 % and 5 C/95-100 % acc. to IEC/EN 60068--30 Ambient temperature (with daily average +35 C) C -5... +55 C Storage temperature C -40... +70 C Installation Terminal type Failsafe bi-directional cylinder-lift terminal Cross-section of conductors (top/bottom) solid/ mm 35 mm² / 35 mm² stranded flexible mm 5 mm / 5 mm AWG 14 4 AWG (Cu only) Cross-section of busbars mm 10 mm² / 10 mm² AWG 14 8 AWG Tightening torque IEC Nm.8 Nm UL in-lbs. 18 in-ibs. Screwdriver No. Pozidriv Mounting on DIN-Rail 35 mm, acc. to EN 60715 by fast clip Mounting position any Supply Please note polarity of device Dimensions Mounting dimensions acc. to DIN 43880 1 and weight Pole dimensions (H x D x W) mm 85 x 69 x 17.5 mm Pole weight g approx. 15 g Combination with auxiliary elements See table page 4/4 DIN-Rail components for rolling stock applications CDC00053D004 /5

MCBs S 00 series MT UC, B characteristic Universal range S 01 MT UC CDC01009S0014 S 00 MT UC, B characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 (for DC applications, please note polarity of device) I cu =10 ka 401361 S 0 MT UC CDC01010S0014 A EAN Type code Order code 1 6 4464911 S01MT-B6UC CDS71065R0065 0.15 10 10 446498 S01MT-B10UC CDS71065R0105 0.15 10 13 4464935 S01MT-B13UC CDS71065R0135 0.15 10 16 446494 S01MT-B16UC CDS71065R0165 0.15 10 0 4464959 S01MT-B0UC CDS71065R005 0.15 10 5 4464966 S01MT-B5UC CDS71065R055 0.15 10 3 4464973 S01MT-B3UC CDS71065R035 0.15 10 40 4464980 S01MT-B40UC CDS71065R0405 0.15 10 50 4464997 S01MT-B50UC CDS71065R0505 0.15 10 63 4465000 S01MT-B63UC CDS71065R0635 0.15 10 S 03 MT UC CDC01011S0014 6 446515 S0MT-B6UC CDS7065R0065 0.50 5 10 4465 S0MT-B10UC CDS7065R0105 0.50 5 13 446539 S0MT-B13UC CDS7065R0135 0.50 5 16 446546 S0MT-B16UC CDS7065R0165 0.50 5 0 446553 S0MT-B0UC CDS7065R005 0.50 5 5 446560 S0MT-B5UC CDS7065R055 0.50 5 3 446577 S0MT-B3UC CDS7065R035 0.50 5 40 446584 S0MT-B40UC CDS7065R0405 0.50 5 50 446591 S0MT-B50UC CDS7065R0505 0.50 5 63 4465307 S0MT-B63UC CDS7065R0635 0.50 5 S 04 MT UC CDC0101S0014 3 6 446551 S03MT-B6UC CDS73065R0065 0.375 1 10 446559 S03MT-B10UC CDS73065R0105 0.375 1 13 4465536 S03MT-B13UC CDS73065R0135 0.375 1 16 4465543 S03MT-B16UC CDS73065R0165 0.375 1 0 4465550 S03MT-B0UC CDS73065R005 0.375 1 5 4465567 S03MT-B5UC CDS73065R055 0.375 1 3 4465574 S03MT-B3UC CDS73065R035 0.375 1 40 4465581 S03MT-B40UC CDS73065R0405 0.375 1 50 4465598 S03MT-B50UC CDS73065R0505 0.375 1 63 4465604 S03MT-B63UC CDS73065R0635 0.375 1 4 6 4465819 S04MT-B6UC CDS74065R0065 0.500 1 10 446586 S04MT-B10UC CDS74065R0105 0.500 1 13 4465833 S04MT-B13UC CDS74065R0135 0.500 1 16 4465840 S04MT-B16UC CDS74065R0165 0.500 1 0 4465857 S04MT-B0UC CDS74065R005 0.500 1 5 4465864 S04MT-B5UC CDS74065R055 0.500 1 3 4465871 S04MT-B3UC CDS74065R035 0.500 1 40 4465888 S04MT-B40UC CDS74065R0405 0.500 1 50 4465895 S04MT-B50UC CDS74065R0505 0.500 1 63 4465901 S04MT-B63UC CDS74065R0635 0.500 1 /6 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 00 series MT UC, C characteristic Universal range S 01 MT UC CDC01009S0014 S 00 MT UC, C characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373) (for DC applications, please note polarity of device) I cu =10 ka 401361 S 0 MT UC CDC01010S0014 A EAN Type code Order code 1 0.5 4448843 S01MT-C0,5UC CDS71065R0984 0.15 10 1 444818 S01MT-C1UC CDS71065R0014 0.15 10 1.6 4448836 S01MT-C1,6UC CDS71065R0974 0.15 10 44485 S01MT-CUC CDS71065R004 0.15 10 3 44483 S01MT-C3UC CDS71065R0034 0.15 10 4 444849 S01MT-C4UC CDS71065R0044 0.15 10 6 444856 S01MT-C6UC CDS71065R0064 0.15 10 8 444863 S01MT-C8UC CDS71065R0084 0.15 10 10 444887 S01MT-C10UC CDS71065R0104 0.15 10 13 4448300 S01MT-C13UC CDS71065R0134 0.15 10 16 4448331 S01MT-C16UC CDS71065R0164 0.15 10 0 4448355 S01MT-C0UC CDS71065R004 0.15 10 5 4448386 S01MT-C5UC CDS71065R054 0.15 10 3 4448454 S01MT-C3UC CDS71065R034 0.15 10 40 44485 S01MT-C40UC CDS71065R0404 0.15 10 50 444865 S01MT-C50UC CDS71065R0504 0.15 10 63 444889 S01MT-C63UC CDS71065R0634 0.15 10 401361 A EAN Type code Order code 0.5 4449451 S0MT-C0,5UC CDS7065R0984 0.50 5 1 4448850 S0MT-C1UC CDS7065R0014 0.50 5 1.6 4449444 S0MT-C1,6UC CDS7065R0974 0.50 5 4448867 S0MT-CUC CDS7065R004 0.50 5 3 4448874 S0MT-C3UC CDS7065R0034 0.50 5 4 4448881 S0MT-C4UC CDS7065R0044 0.50 5 6 4448898 S0MT-C6UC CDS7065R0064 0.50 5 8 4448904 S0MT-C8UC CDS7065R0084 0.50 5 10 444898 S0MT-C10UC CDS7065R0104 0.50 5 13 444894 S0MT-C13UC CDS7065R0134 0.50 5 16 4448973 S0MT-C16UC CDS7065R0164 0.50 5 0 4448997 S0MT-C0UC CDS7065R004 0.50 5 5 444904 S0MT-C5UC CDS7065R054 0.50 5 3 4449093 S0MT-C3UC CDS7065R034 0.50 5 40 4449161 S0MT-C40UC CDS7065R0404 0.50 5 50 444991 S0MT-C50UC CDS7065R0504 0.50 5 63 4449437 S0MT-C63UC CDS7065R0634 0.50 5 DIN-Rail components for rolling stock applications CDC00053D004 /7

MCBs S 00 series MT UC, C characteristic Universal range 401361 A EAN Type code Order code kg pc. CDC01011S0014 3 0.5 444801 S03MT-C0,5UC CDS73065R0984 0.375 1 1 4447600 S03MT-C1UC CDS73065R0014 0.375 1 1,6 4448195 S03MT-C1,6UC CDS73065R0974 0.375 1 4447617 S03MT-CUC CDS73065R004 0.375 1 S 03 MT UC 3 444764 S03MT-C3UC CDS73065R0034 0.375 1 4 4447631 S03MT-C4UC CDS73065R0044 0.375 1 6 4447648 S03MT-C6UC CDS73065R0064 0.375 1 8 4447655 S03MT-C8UC CDS73065R0084 0.375 1 10 4447679 S03MT-C10UC CDS73065R0104 0.375 1 13 4447693 S03MT-C13UC CDS73065R0134 0.375 1 16 444773 S03MT-C16UC CDS73065R0164 0.375 1 0 4447747 S03MT-C0UC CDS73065R004 0.375 1 5 4447778 S03MT-C5UC CDS73065R054 0.375 1 S 04 MT UC CDC0101S0014 3 4447846 S03MT-C3UC CDS73065R034 0.375 1 40 4447914 S03MT-C40UC CDS73065R0404 0.375 1 50 4448041 S03MT-C50UC CDS73065R0504 0.375 1 63 4448188 S03MT-C63UC CDS73065R0634 0.375 1 401361 A EAN Type code Order code kg pc. 4 0.5 4447563 S04MT-C0,5UC CDS74065R0984 0.500 1 1 4446948 S04MT-C1UC CDS74065R0014 0.500 1 1.6 4447556 S04MT-C1,6UC CDS74065R0974 0.500 1 4446955 S04MT-CUC CDS74065R004 0.500 1 3 444696 S04MT-C3UC CDS74065R0034 0.500 1 4 4446979 S04MT-C4UC CDS74065R0044 0.500 1 6 4446986 S04MT-C6UC CDS74065R0064 0.500 1 8 4446993 S04MT-C8UC CDS74065R0084 0.500 1 10 4447013 S04MT-C10UC CDS74065R0104 0.500 1 13 4447037 S04MT-C13UC CDS74065R0134 0.500 1 16 4447068 S04MT-C16UC CDS74065R0164 0.500 1 0 444708 S04MT-C0UC CDS74065R004 0.500 1 5 444711 S04MT-C5UC CDS74065R054 0.500 1 3 4447181 S04MT-C3UC CDS74065R034 0.500 1 40 444759 S04MT-C40UC CDS74065R0404 0.500 1 50 4447389 S04MT-C50UC CDS74065R0504 0.500 1 63 4447549 S04MT-C63UC CDS74065R0634 0.500 1 /8 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 00 series MT UC, K characteristic Universal range S 01 MT UC CDC0109S0013 S 00 MT UC, K characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 (for DC applications, please note polarity of device) I cu =10 ka 401361 A EAN Type code Order code 1 0. 444870 S01MT-K0,UC CDS71065R0087 0.15 10 0.3 444894 S01MT-K0,3UC CDS71065R0117 0.15 10 0.5 4448317 S01MT-K0,5UC CDS71065R0157 0.15 10 0.75 4448348 S01MT-K0,75UC CDS71065R0187 0.15 10 1 444836 S01MT-K1UC CDS71065R017 0.15 10 1.6 4448393 S01MT-K1,6UC CDS71065R057 0.15 10 4448416 S01MT-KUC CDS71065R077 0.15 10 3 4448430 S01MT-K3UC CDS71065R0317 0.15 10 4 4448461 S01MT-K4UC CDS71065R0337 0.15 10 5 4448485 S01MT-K5UC CDS71065R0357 0.15 10 6 4448508 S01MT-K6UC CDS71065R0377 0.15 10 8 4448539 S01MT-K8UC CDS71065R0407 0.15 10 10 4448553 S01MT-K10UC CDS71065R047 0.15 10 13 4448577 S01MT-K13UC CDS71065R0447 0.15 10 15 4448591 S01MT-K15UC CDS71065R0457 0.15 10 16 4448614 S01MT-K16UC CDS71065R0467 0.15 10 0 4448638 S01MT-K0UC CDS71065R0487 0.15 10 5 4448669 S01MT-K5UC CDS71065R0517 0.15 10 30 4448683 S01MT-K30UC CDS71065R057 0.15 10 3 4448706 S01MT-K3UC CDS71065R0537 0.15 10 35 444870 S01MT-K35UC CDS71065R0547 0.15 10 40 4448744 S01MT-K40UC CDS71065R0557 0.15 10 50 4448768 S01MT-K50UC CDS71065R0577 0.15 10 60 444878 S01MT-K60UC CDS71065R0587 0.15 10 63 4448805 S01MT-K63UC CDS71065R0607 0.15 10 DIN-Rail components for rolling stock applications CDC00053D004 /9

MCBs S 00 series MT UC, K characteristic Universal range 401361 A EAN Type code Order code kg pc. CDC01030S0013 0. 4448911 S0MT-K0,UC CDS7065R0087 0.50 5 0.3 4448935 S0MT-K0,3UC CDS7065R0117 0.50 5 0.5 4448959 S0MT-K0,5UC CDS7065R0157 0.50 5 0.75 4448980 S0MT-K0,75UC CDS7065R0187 0.50 5 S 0 MT UC 1 4449000 S0MT-K1UC CDS7065R017 0.50 5 1.6 4449031 S0MT-K1,6UC CDS7065R057 0.50 5 4449055 S0MT-KUC CDS7065R077 0.50 5 3 4449079 S0MT-K3UC CDS7065R0317 0.50 5 4 4449109 S0MT-K4UC CDS7065R0337 0.50 5 5 444913 S0MT-K5UC CDS7065R0357 0.50 5 6 4449147 S0MT-K6UC CDS7065R0377 0.50 5 8 4449178 S0MT-K8UC CDS7065R0407 0.50 5 CDC01031S0013 10 444919 S0MT-K10UC CDS7065R047 0.50 5 13 444915 S0MT-K13UC CDS7065R0447 0.50 5 15 444939 S0MT-K15UC CDS7065R0457 0.50 5 16 444953 S0MT-K16UC CDS7065R0467 0.50 5 S 03 MT UC 0 444977 S0MT-K0UC CDS7065R0487 0.50 5 5 4449307 S0MT-K5UC CDS7065R0517 0.50 5 30 444931 S0MT-K30UC CDS7065R057 0.50 5 3 4449345 S0MT-K3UC CDS7065R0537 0.50 5 35 4449369 S0MT-K35UC CDS7065R0547 0.50 5 40 4449383 S0MT-K40UC CDS7065R0557 0.50 5 50 4449406 S0MT-K50UC CDS7065R0577 0.50 5 60 444940 S0MT-K60UC CDS7065R0587 0.50 5 63 4447587 S0MT-K63UC CDS7065R0607 0.50 5 401361 A EAN Type code Order code 3 0. 444766 S03MT-K0,UC CDS73065R0087 0.375 1 0.3 4447686 S03MT-K0,3UC CDS73065R0117 0.375 1 0.5 4447709 S03MT-K0,5UC CDS73065R0157 0.375 1 0.75 4447730 S03MT-K0,75UC CDS73065R0187 0.375 1 1 4447754 S03MT-K1UC CDS73065R017 0.375 1 1.6 4447785 S03MT-K1,6UC CDS73065R057 0.375 1 4447808 S03MT-KUC CDS73065R077 0.375 1 3 44478 S03MT-K3UC CDS73065R0317 0.375 1 4 4447853 S03MT-K4UC CDS73065R0337 0.375 1 5 4447877 S03MT-K5UC CDS73065R0357 0.375 1 6 4447891 S03MT-K6UC CDS73065R0377 0.375 1 8 444791 S03MT-K8UC CDS73065R0407 0.375 1 10 4447945 S03MT-K10UC CDS73065R047 0.375 1 13 4447969 S03MT-K13UC CDS73065R0447 0.375 1 15 4447983 S03MT-K15UC CDS73065R0457 0.375 1 16 4448003 S03MT-K16UC CDS73065R0467 0.375 1 0 444807 S03MT-K0UC CDS73065R0487 0.375 1 5 4448058 S03MT-K5UC CDS73065R0517 0.375 1 30 444807 S03MT-K30UC CDS73065R057 0.375 1 3 4448096 S03MT-K3UC CDS73065R0537 0.375 1 35 4448119 S03MT-K35UC CDS73065R0547 0.375 1 40 4448133 S03MT-K40UC CDS73065R0557 0.375 1 50 4448157 S03MT-K50UC CDS73065R0577 0.375 1 60 4448171 S03MT-K60UC CDS73065R0587 0.375 1 63 444694 S03MT-K63UC CDS73065R0607 0.375 1 /30 CDC00053D004 DIN-Rail components for rolling stock applications

401361 A EAN Type code Order code kg pc. CDC0103S0013 4 0. 4447006 S04MT-K0,UC CDS74065R0087 0.500 1 0.3 444700 S04MT-K0,3UC CDS74065R0117 0.500 1 0.5 4447044 S04MT-K0,5UC CDS74065R0157 0.500 1 0.75 4447075 S04MT-K0,75UC CDS74065R0187 0.500 1 S 04 MT UC 1 4447099 S04MT-K1UC CDS74065R017 0.500 1 1.6 444719 S04MT-K1,6UC CDS74065R057 0.500 1 4447143 S04MT-KUC CDS74065R077 0.500 1 3 4447167 S04MT-K3UC CDS74065R0317 0.500 1 4 4447198 S04MT-K4UC CDS74065R0337 0.500 1 5 444711 S04MT-K5UC CDS74065R0357 0.500 1 6 444735 S04MT-K6UC CDS74065R0377 0.500 1 8 444766 S04MT-K8UC CDS74065R0407 0.500 1 10 444780 S04MT-K10UC CDS74065R047 0.500 1 13 4447303 S04MT-K13UC CDS74065R0447 0.500 1 15 444737 S04MT-K15UC CDS74065R0457 0.500 1 16 4447341 S04MT-K16UC CDS74065R0467 0.500 1 0 4447365 S04MT-K0UC CDS74065R0487 0.500 1 5 4447396 S04MT-K5UC CDS74065R0517 0.500 1 30 4447419 S04MT-K30UC CDS74065R057 0.500 1 3 4447433 S04MT-K3UC CDS74065R0537 0.500 1 35 4447457 S04MT-K35UC CDS74065R0547 0.500 1 40 4447471 S04MT-K40UC CDS74065R0557 0.500 1 50 4447495 S04MT-K50UC CDS74065R0577 0.500 1 60 4447518 S04MT-K60UC CDS74065R0587 0.500 1 63 4449468 S04MT-K63UC CDS74065R0607 0.500 1 DIN-Rail components for rolling stock applications CDC00053D004 /31

MCBs S 00 series MT UC, Z characteristic Universal range S 01 MT UC CDC0109S0013 S 00 MT UC, Z characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC. 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 (for DC applications, please note polarity of device) I cu =10 ka 401361 S 0 MT UC CDC01030S0013 A EAN Type code Order code 1 0.5 444834 S01MT-Z0,5UC CDS71065R0158 0.15 10 1 4448379 S01MT-Z1UC CDS71065R018 0.15 10 1.6 4448409 S01MT-Z1,6UC CDS71065R058 0.15 10 444843 S01MT-ZUC CDS71065R078 0.15 10 3 4448447 S01MT-Z3UC CDS71065R0318 0.15 10 4 4448478 S01MT-Z4UC CDS71065R0338 0.15 10 5 444849 S01MT-Z5UC CDS71065R0358 0.15 10 6 4448515 S01MT-Z6UC CDS71065R0378 0.15 10 8 4448546 S01MT-Z8UC CDS71065R0408 0.15 10 10 4448560 S01MT-Z10UC CDS71065R048 0.15 10 15 4448607 S01MT-Z15UC CDS71065R0458 0.15 10 16 444861 S01MT-Z16UC CDS71065R0468 0.15 10 0 4448645 S01MT-Z0UC CDS71065R0488 0.15 10 5 4448676 S01MT-Z5UC CDS71065R0518 0.15 10 30 4448690 S01MT-Z30UC CDS71065R058 0.15 10 3 4448713 S01MT-Z3UC CDS71065R0538 0.15 10 35 4448737 S01MT-Z35UC CDS71065R0548 0.15 10 40 4448751 S01MT-Z40UC CDS71065R0558 0.15 10 50 4448775 S01MT-Z50UC CDS71065R0578 0.15 10 60 4448799 S01MT-Z60UC CDS71065R0588 0.15 10 63 444881 S01MT-Z63UC CDS71065R0608 0.15 10 0.5 4448966 S0MT-Z0,5UC CDS7065R0158 0.50 5 1 4449017 S0MT-Z1UC CDS7065R018 0.50 5 1.6 4449048 S0MT-Z1,6UC CDS7065R058 0.50 5 444906 S0MT-ZUC CDS7065R078 0.50 5 3 4449086 S0MT-Z3UC CDS7065R0318 0.50 5 4 4449116 S0MT-Z4UC CDS7065R0338 0.50 5 5 4449130 S0MT-Z5UC CDS7065R0358 0.50 5 6 4449154 S0MT-Z6UC CDS7065R0378 0.50 5 8 4449185 S0MT-Z8UC CDS7065R0408 0.50 5 10 444908 S0MT-Z10UC CDS7065R048 0.50 5 15 444946 S0MT-Z15UC CDS7065R0458 0.50 5 16 444960 S0MT-Z16UC CDS7065R0468 0.50 5 0 444984 S0MT-Z0UC CDS7065R0488 0.50 5 5 4449314 S0MT-Z5UC CDS7065R0518 0.50 5 30 4449338 S0MT-Z30UC CDS7065R058 0.50 5 3 444935 S0MT-Z3UC CDS7065R0538 0.50 5 35 4449376 S0MT-Z35UC CDS7065R0548 0.50 5 40 4449390 S0MT-Z40UC CDS7065R0558 0.50 5 50 4449413 S0MT-Z50UC CDS7065R0578 0.50 5 60 4447570 S0MT-Z60UC CDS7065R0588 0.50 5 63 4447594 S0MT-Z63UC CDS7065R0608 0.50 5 /3 CDC00053D004 DIN-Rail components for rolling stock applications

401361 A EAN Type code Order code kg pc. CDC01031S0013 3 0.5 4447716 S03MT-Z0,5UC CDS73065R0158 0.375 1 1 4447761 S03MT-Z1UC CDS73065R018 0.375 1 1.6 444779 S03MT-Z1,6UC CDS73065R058 0.375 1 4447815 S03MT-ZUC CDS73065R078 0.375 1 S 03 MT UC 3 4447839 S03MT-Z3UC CDS73065R0318 0.375 1 4 4447860 S03MT-Z4UC CDS73065R0338 0.375 1 5 4447884 S03MT-Z5UC CDS73065R0358 0.375 1 6 4447907 S03MT-Z6UC CDS73065R0378 0.375 1 8 4447938 S03MT-Z8UC CDS73065R0408 0.375 1 10 444795 S03MT-Z10UC CDS73065R048 0.375 1 15 4447990 S03MT-Z15UC CDS73065R0458 0.375 1 16 4448010 S03MT-Z16UC CDS73065R0468 0.375 1 0 4448034 S03MT-Z0UC CDS73065R0488 0.375 1 S 04 MT UC CDC0103S0013 5 4448065 S03MT-Z5UC CDS73065R0518 0.375 1 30 4448089 S03MT-Z30UC CDS73065R058 0.375 1 3 444810 S03MT-Z3UC CDS73065R0538 0.375 1 35 444816 S03MT-Z35UC CDS73065R0548 0.375 1 40 4448140 S03MT-Z40UC CDS73065R0558 0.375 1 50 4448164 S03MT-Z50UC CDS73065R0578 0.375 1 60 4446917 S03MT-Z60UC CDS73065R0588 0.375 1 63 4446931 S03MT-Z63UC CDS73065R0608 0.375 1 401361 A EAN Type code Order code 4 0.5 4447051 S04MT-Z0,5UC CDS74065R0158 0.500 1 1 4447105 S04MT-Z1UC CDS74065R018 0.500 1 1.6 4447136 S04MT-Z1,6UC CDS74065R058 0.500 1 4447150 S04MT-ZUC CDS74065R078 0.500 1 3 4447174 S04MT-Z3UC CDS74065R0318 0.500 1 4 444704 S04MT-Z4UC CDS74065R0338 0.500 1 5 44478 S04MT-Z5UC CDS74065R0358 0.500 1 6 44474 S04MT-Z6UC CDS74065R0378 0.500 1 8 444773 S04MT-Z8UC CDS74065R0408 0.500 1 10 444797 S04MT-Z10UC CDS74065R048 0.500 1 15 4447334 S04MT-Z15UC CDS74065R0458 0.500 1 16 4447358 S04MT-Z16UC CDS74065R0468 0.500 1 0 444737 S04MT-Z0UC CDS74065R0488 0.500 1 5 444740 S04MT-Z5UC CDS74065R0518 0.500 1 30 444746 S04MT-Z30UC CDS74065R058 0.500 1 3 4447440 S04MT-Z3UC CDS74065R0538 0.500 1 35 4447464 S04MT-Z35UC CDS74065R0548 0.500 1 40 4447488 S04MT-Z40UC CDS74065R0558 0.500 1 50 4447501 S04MT-Z50UC CDS74065R0578 0.500 1 60 444755 S04MT-Z60UC CDS74065R0588 0.500 1 63 444753 S04MT-Z63UC CDS74065R0608 0.500 1 DIN-Rail components for rolling stock applications CDC00053D004 /33

MCBs S 00 M UC series technical features S00 M UC Standards Product Standard IEC/EN 60898-, IEC/EN 60947- S 01 M UC CDC01031S0011 Hazard level acc. to EN 45545- R6/HL3 Classifi cation according to I3 / F (Exigence ) NF F 16-101/10 Resistance to shocks and vibrations Category 1 - Class A/B - Body mounted acc. to IEC 61373 GOST 919-88 approval Yes General data Poles 1P, P, 3P, 4P A 0. - 63 A frequency f Hz 0/50/60 Hz insulation voltage U i acc. to IEC/EN 60664-1 V 53 V AC (phase to ground), 440 V AC (phase to phase) Overvoltage category III Pollution degree Data acc. Tripping characteristics B, C to IEC/EN 60898- operational voltage U n V 1P: 30 V AC, 0 V DC P: 400 V AC, 440 V DC 3...4P: 400 V AC (only according to IEC/EN 60898-1) Max. power frequency recovery voltage (U max ) V 1P: 53 V AC, 50 V DC P: 440 V AC, 500 V DC 3...4P: 440 V AC (only according to IEC/EN 60898-1) Min. operating voltage V 1 V AC 1 V DC short-circuit capacity I cn ka 10 ka Energy limiting class (B, C up to 40 A) 3 impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at,000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C 30 C Electrical endurance ops. < 3 A: 0,000 ops. (AC), 3 A: 10,000 ops. (AC); 1,000 ops. (DC) Data acc. Tripping characteristics B, C, K, Z to IEC/EN 60947- operational voltage U e V 1P: 53 V AC, 0 V DC...4P: 440 V AC, 440 V DC Max. power frequency recovery voltage (U max ) V 1P: 66 V AC, 50 V DC...4P: 46 V AC, 500 V DC Min. operating voltage V 1 V AC 1 V DC ultimate short-circuit breaking capacity I cu ka 40 A: 10 ka (AC); 10 ka (DC) >40 A: 6 ka (AC); 10 ka (DC) service short-circuit breaking capacity I cs ka 40 A: 7.5 ka (AC); 10 ka (DC) >40 A: 6 ka (AC); 10 ka (DC) impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at,000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping C B, C: 55 C; K, Z: 0 C characteristics Electrical endurance ops. < 3 A: 0,000 ops. (AC), 3 A: 10,000 ops. (AC); 1,500 ops. (DC) /34 CDC00053D004 DIN-Rail components for rolling stock applications

S00 M UC Mechanical Housing Insulation group I, RAL 7035 data Toggle Insulation group II, black, sealable Contact position indicator Real CPI (green OFF / red ON) Protection degree acc. to EN 6059 IP0, IP40 in enclosure with cover Mechanical endurance ops. 0,000 ops. Shock resistance acc. to IEC/EN 60068--7 5 g - shocks - 13 ms Vibration resistance acc. to IEC/EN 5 g - 0 cycles at 5... 150... 5 Hz at 0.8 In 60068--6 Environmental conditions (damp heat) C/RH 8 cycles with 55 C/90-96 % and 5 C/95-100 % acc. to IEC/EN 60068--30 Ambient temperature (with daily average C -5... +55 C +35 C) Storage temperature C -40... +70 C Installation Terminal type Failsafe bi-directional cylinder-lift terminal Cross-section of conductors (top/bottom) solid/ mm 35 mm² / 35 mm² stranded flexible mm 5 mm / 5 mm AWG 14 4 AWG (Cu only) Cross-section of busbars mm 10 mm² / 10 mm² AWG 14 8 AWG Tightening torque IEC Nm.8 Nm UL in-lbs. 18 in-ibs. Screwdriver No. Pozidriv Mounting on DIN-Rail 35 mm, acc. to EN 60715 by fast clip Mounting position any Supply Please note polarity of device Dimensions Mounting dimensions acc. to DIN 43880 1 and weight Pole dimensions (H x D x W) mm 85 x 69 x 17.5 mm Pole weight g approx. 15 g Combination with auxiliary elements See table page 4/4 DIN-Rail components for rolling stock applications CDC00053D004 /35

MCBs S 00 series M UC 10000, B characteristic Universal range S 01 M UC CDC01031S0011 S 00 M UC, B characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60898-, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class A/B (Body mounted) according to IEC 61373 (for DC applications, please note polarity of device) I cu =10 ka 401361 S 0 M UC CDC01035S0011 A EAN Type code Order code 1 6 4430596 S01M-B6UC CDS71061R0065 0.15 10 10 443060 S01M-B10UC CDS71061R0105 0.15 10 13 4430619 S01M-B13UC CDS71061R0135 0.15 10 16 443066 S01M-B16UC CDS71061R0165 0.15 10 0 4430633 S01M-B0UC CDS71061R005 0.15 10 5 4430640 S01M-B5UC CDS71061R055 0.15 10 3 4430657 S01M-B3UC CDS71061R035 0.15 10 40 4430664 S01M-B40UC CDS71061R0405 0.15 10 50 4430671 S01M-B50UC CDS71061R0505 0.15 10 63 4430688 S01M-B63UC CDS71061R0635 0.15 10 401361 A EAN Type code Order code 6 443811 S0M-B6UC CDS7061R0065 0.50 5 10 44388 S0M-B10UC CDS7061R0105 0.50 5 13 443835 S0M-B13UC CDS7061R0135 0.50 5 16 44384 S0M-B16UC CDS7061R0165 0.50 5 0 443859 S0M-B0UC CDS7061R005 0.50 5 5 443866 S0M-B5UC CDS7061R055 0.50 5 3 443873 S0M-B3UC CDS7061R035 0.50 5 40 443880 S0M-B40UC CDS7061R0405 0.50 5 50 443897 S0M-B50UC CDS7061R0505 0.50 5 63 443903 S0M-B63UC CDS7061R0635 0.50 5 /36 CDC00053D004 DIN-Rail components for rolling stock applications

401361 A EAN Type code Order code kg pc. CDC01034S0011 3 6 4435034 S03M-B6UC CDS73061R0065 0.375 1 10 4435041 S03M-B10UC CDS73061R0105 0.375 1 13 4435058 S03M-B13UC CDS73061R0135 0.375 1 16 4435065 S03M-B16UC CDS73061R0165 0.375 1 S 03 M UC 0 443507 S03M-B0UC CDS73061R005 0.375 1 5 4435089 S03M-B5UC CDS73061R055 0.375 1 3 4435096 S03M-B3UC CDS73061R035 0.375 1 40 443510 S03M-B40UC CDS73061R0405 0.375 1 50 4435119 S03M-B50UC CDS73061R0505 0.375 1 63 443516 S03M-B63UC CDS73061R0635 0.375 1 401361 S 04 M UC CDC01033S0011 A EAN Type code Order code 4 6 443750 S04M-B6UC CDS74061R0065 0.500 1 10 443767 S04M-B10UC CDS74061R0105 0.500 1 13 443774 S04M-B13UC CDS74061R0135 0.500 1 16 443781 S04M-B16UC CDS74061R0165 0.500 1 0 443798 S04M-B0UC CDS74061R005 0.500 1 5 4437304 S04M-B5UC CDS74061R055 0.500 1 3 4437311 S04M-B3UC CDS74061R035 0.500 1 40 443738 S04M-B40UC CDS74061R0405 0.500 1 50 4437335 S04M-B50UC CDS74061R0505 0.500 1 63 443734 S04M-B63UC CDS74061R0635 0.500 1 DIN-Rail components for rolling stock applications CDC00053D004 /37

MCBs S 00 series M UC 10000, C characteristic Universal range S 01 M UC CDC01031S0011 S 00 M UC, C characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60898-, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class A/B (Body mounted) according to IEC 61373) (for DC applications, please note polarity of device) I cu =10 ka 401361 S 0 M UC CDC01035S0011 A EAN Type code Order code 1 0.5 4430695 S01M-C0.5UC CDS71061R0984 0.15 10 1 4430701 S01M-C1UC CDS71061R0014 0.15 10 1.6 4430718 S01M-C1.6UC CDS71061R0974 0.15 10 443075 S01M-CUC CDS71061R004 0.15 10 3 443073 S01M-C3UC CDS71061R0034 0.15 10 4 4430749 S01M-C4UC CDS71061R0044 0.15 10 6 4430756 S01M-C6UC CDS71061R0064 0.15 10 8 4430763 S01M-C8UC CDS71061R0084 0.15 10 10 4430770 S01M-C10UC CDS71061R0104 0.15 10 13 4430787 S01M-C13UC CDS71061R0134 0.15 10 16 4430794 S01M-C16UC CDS71061R0164 0.15 10 0 4430800 S01M-C0UC CDS71061R004 0.15 10 5 4430817 S01M-C5UC CDS71061R054 0.15 10 3 443084 S01M-C3UC CDS71061R034 0.15 10 40 4430831 S01M-C40UC CDS71061R0404 0.15 10 50 4430848 S01M-C50UC CDS71061R0504 0.15 10 63 4430855 S01M-C63UC CDS71061R0634 0.15 10 401361 A EAN Type code Order code 0.5 443910 S0M-C0.5UC CDS7061R0984 0.50 5 1 44397 S0M-C1UC CDS7061R0014 0.50 5 1.6 443934 S0M-C1.6UC CDS7061R0974 0.50 5 443941 S0M-CUC CDS7061R004 0.50 5 3 443958 S0M-C3UC CDS7061R0034 0.50 5 4 443965 S0M-C4UC CDS7061R0044 0.50 5 6 44397 S0M-C6UC CDS7061R0064 0.50 5 8 443989 S0M-C8UC CDS7061R0084 0.50 5 10 443996 S0M-C10UC CDS7061R0104 0.50 5 13 4433009 S0M-C13UC CDS7061R0134 0.50 5 16 4433016 S0M-C16UC CDS7061R0164 0.50 5 0 443303 S0M-C0UC CDS7061R004 0.50 5 5 4433030 S0M-C5UC CDS7061R054 0.50 5 3 4433047 S0M-C3UC CDS7061R034 0.50 5 40 4433054 S0M-C40UC CDS7061R0404 0.50 5 50 4433061 S0M-C50UC CDS7061R0504 0.50 5 63 4433078 S0M-C63UC CDS7061R0634 0.50 5 /38 CDC00053D004 DIN-Rail components for rolling stock applications

401361 A EAN Type code Order code kg pc. CDC01034S0011 3 0.5 4435133 S03M-C0.5UC CDS73061R0984 0.375 1 1 4435140 S03M-C1UC CDS73061R0014 0.375 1 1.6 4435157 S03M-C1.6UC CDS73061R0974 0.375 1 4435164 S03M-CUC CDS73061R004 0.375 1 S 03 M UC 3 4435171 S03M-C3UC CDS73061R0034 0.375 1 4 4435188 S03M-C4UC CDS73061R0044 0.375 1 6 4435195 S03M-C6UC CDS73061R0064 0.375 1 8 443501 S03M-C8UC CDS73061R0084 0.375 1 10 443518 S03M-C10UC CDS73061R0104 0.375 1 13 44355 S03M-C13UC CDS73061R0134 0.375 1 16 44353 S03M-C16UC CDS73061R0164 0.375 1 0 443549 S03M-C0UC CDS73061R004 0.375 1 5 443556 S03M-C5UC CDS73061R054 0.375 1 3 443563 S03M-C3UC CDS73061R034 0.375 1 CDC01033S0011 40 443570 S03M-C40UC CDS73061R0404 0.375 1 50 443587 S03M-C50UC CDS73061R0504 0.375 1 63 443594 S03M-C63UC CDS73061R0634 0.375 1 S 04 M UC 401361 A EAN Type code Order code 4 0.5 4437359 S04M-C0.5UC CDS74061R0984 0.500 1 1 4437366 S04M-C1UC CDS74061R0014 0.500 1 1.6 4437373 S04M-C1.6UC CDS74061R0974 0.500 1 4437380 S04M-CUC CDS74061R004 0.500 1 3 4437397 S04M-C3UC CDS74061R0034 0.500 1 4 4437403 S04M-C4UC CDS74061R0044 0.500 1 6 4437410 S04M-C6UC CDS74061R0064 0.500 1 8 443747 S04M-C8UC CDS74061R0084 0.500 1 10 4437434 S04M-C10UC CDS74061R0104 0.500 1 13 4437441 S04M-C13UC CDS74061R0134 0.500 1 16 4437458 S04M-C16UC CDS74061R0164 0.500 1 0 4437465 S04M-C0UC CDS74061R004 0.500 1 5 443747 S04M-C5UC CDS74061R054 0.500 1 3 4437489 S04M-C3UC CDS74061R034 0.500 1 40 4437496 S04M-C40UC CDS74061R0404 0.500 1 50 443750 S04M-C50UC CDS74061R0504 0.500 1 63 4437519 S04M-C63UC CDS74061R0634 0.500 1 DIN-Rail components for rolling stock applications CDC00053D004 /39

MCBs S 00 series M UC, K characteristic Universal range S 01 M UC CDC010S001 S 00 M UC, K characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class A/B (Body mounted) according to IEC 61373 (for DC applications, please note polarity of device) I cu =10 ka 401361 A EAN Type code Order code 1 0. 443086 S01M-K0.UC CDS71061R0087 0.15 10 0.3 4430879 S01M-K0.3UC CDS71061R0117 0.15 10 0.5 4430886 S01M-K0.5UC CDS71061R0157 0.15 10 0.75 4430893 S01M-K0.75UC CDS71061R0187 0.15 10 1 4430909 S01M-K1UC CDS71061R017 0.15 10 1.6 4430916 S01M-K1.6UC CDS71061R057 0.15 10 443093 S01M-KUC CDS71061R077 0.15 10 3 4430930 S01M-K3UC CDS71061R0317 0.15 10 4 4430947 S01M-K4UC CDS71061R0337 0.15 10 5 4430954 S01M-K5UC CDS71061R0357 0.15 10 6 4430961 S01M-K6UC CDS71061R0377 0.15 10 8 4430978 S01M-K8UC CDS71061R0407 0.15 10 10 4430985 S01M-K10UC CDS71061R047 0.15 10 13 443099 S01M-K13UC CDS71061R0447 0.15 10 15 4431005 S01M-K15UC CDS71061R0457 0.15 10 16 443101 S01M-K16UC CDS71061R0467 0.15 10 0 443109 S01M-K0UC CDS71061R0487 0.15 10 5 4431036 S01M-K5UC CDS71061R0517 0.15 10 30 4431043 S01M-K30UC CDS71061R057 0.15 10 3 4431050 S01M-K3UC CDS71061R0537 0.15 10 35 4431067 S01M-K35UC CDS71061R0547 0.15 10 40 4431074 S01M-K40UC CDS71061R0557 0.15 10 50 4431081 S01M-K50UC CDS71061R0577 0.15 10 60 4431098 S01M-K60UC CDS71061R0587 0.15 10 63 4431104 S01M-K63UC CDS71061R0607 0.15 10 /40 CDC00053D004 DIN-Rail components for rolling stock applications

401361 A EAN Type code Order code kg pc. CDC0107S001 0. 4433085 S0M-K0.UC CDS7061R0087 0.50 5 0.3 443309 S0M-K0.3UC CDS7061R0117 0.50 5 0.5 4433108 S0M-K0.5UC CDS7061R0157 0.50 5 0.75 4433115 S0M-K0.75UC CDS7061R0187 0.50 5 S 0 M UC 1 44331 S0M-K1UC CDS7061R017 0.50 5 1.6 4433139 S0M-K1.6UC CDS7061R057 0.50 5 4433146 S0M-KUC CDS7061R077 0.50 5 3 4433153 S0M-K3UC CDS7061R0317 0.50 5 4 4433160 S0M-K4UC CDS7061R0337 0.50 5 5 4433177 S0M-K5UC CDS7061R0357 0.50 5 6 4433184 S0M-K6UC CDS7061R0377 0.50 5 8 4433191 S0M-K8UC CDS7061R0407 0.50 5 CDC0108S001 10 443307 S0M-K10UC CDS7061R047 0.50 5 13 443314 S0M-K13UC CDS7061R0447 0.50 5 15 44331 S0M-K15UC CDS7061R0457 0.50 5 16 443338 S0M-K16UC CDS7061R0467 0.50 5 S 03 M UC 0 443345 S0M-K0UC CDS7061R0487 0.50 5 5 44335 S0M-K5UC CDS7061R0517 0.50 5 30 443369 S0M-K30UC CDS7061R057 0.50 5 3 443376 S0M-K3UC CDS7061R0537 0.50 5 35 443383 S0M-K35UC CDS7061R0547 0.50 5 40 443390 S0M-K40UC CDS7061R0557 0.50 5 50 4433306 S0M-K50UC CDS7061R0577 0.50 5 60 4433313 S0M-K60UC CDS7061R0587 0.50 5 63 443330 S0M-K63UC CDS7061R0607 0.50 5 401361 A EAN Type code Order code 3 0. 4435300 S03M-K0.UC CDS73061R0087 0.375 1 0.3 4435317 S03M-K0.3UC CDS73061R0117 0.375 1 0.5 443534 S03M-K0.5UC CDS73061R0157 0.375 1 0.75 4435331 S03M-K0.75UC CDS73061R0187 0.375 1 1 4435348 S03M-K1UC CDS73061R017 0.375 1 1.6 4435355 S03M-K1.6UC CDS73061R057 0.375 1 443536 S03M-KUC CDS73061R077 0.375 1 3 4435379 S03M-K3UC CDS73061R0317 0.375 1 4 4435386 S03M-K4UC CDS73061R0337 0.375 1 5 4435393 S03M-K5UC CDS73061R0357 0.375 1 6 4435409 S03M-K6UC CDS73061R0377 0.375 1 8 4435416 S03M-K8UC CDS73061R0407 0.375 1 10 443543 S03M-K10UC CDS73061R047 0.375 1 13 4435430 S03M-K13UC CDS73061R0447 0.375 1 15 4435447 S03M-K15UC CDS73061R0457 0.375 1 16 4435454 S03M-K16UC CDS73061R0467 0.375 1 0 4435461 S03M-K0UC CDS73061R0487 0.375 1 5 4435478 S03M-K5UC CDS73061R0517 0.375 1 30 4435485 S03M-K30UC CDS73061R057 0.375 1 3 443549 S03M-K3UC CDS73061R0537 0.375 1 35 4435508 S03M-K35UC CDS73061R0547 0.375 1 40 4435515 S03M-K40UC CDS73061R0557 0.375 1 50 44355 S03M-K50UC CDS73061R0577 0.375 1 60 4435539 S03M-K60UC CDS73061R0587 0.375 1 63 4435546 S03M-K63UC CDS73061R0607 0.375 1 DIN-Rail components for rolling stock applications CDC00053D004 /41

MCBs S 00 series M UC, K characteristic Universal range 401361 A EAN Type code Order code kg pc. CDC0109S001 4 0. 443756 S04M-K0.UC CDS74061R0087 0.500 1 0.3 4437533 S04M-K0.3UC CDS74061R0117 0.500 1 0.5 4437540 S04M-K0.5UC CDS74061R0157 0.500 1 0.75 4437557 S04M-K0.75UC CDS74061R0187 0.500 1 S 04 M UC 1 4437564 S04M-K1UC CDS74061R017 0.500 1 1.6 4437571 S04M-K1.6UC CDS74061R057 0.500 1 4437588 S04M-KUC CDS74061R077 0.500 1 3 4437595 S04M-K3UC CDS74061R0317 0.500 1 4 4437601 S04M-K4UC CDS74061R0337 0.500 1 5 4437618 S04M-K5UC CDS74061R0357 0.500 1 6 443765 S04M-K6UC CDS74061R0377 0.500 1 8 443763 S04M-K8UC CDS74061R0407 0.500 1 10 4437649 S04M-K10UC CDS74061R047 0.500 1 13 4437656 S04M-K13UC CDS74061R0447 0.500 1 15 4437663 S04M-K15UC CDS74061R0457 0.500 1 16 4437670 S04M-K16UC CDS74061R0467 0.500 1 0 4437687 S04M-K0UC CDS74061R0487 0.500 1 5 4437694 S04M-K5UC CDS74061R0517 0.500 1 30 4437700 S04M-K30UC CDS74061R057 0.500 1 3 4437717 S04M-K3UC CDS74061R0537 0.500 1 35 443774 S04M-K35UC CDS74061R0547 0.500 1 40 4437731 S04M-K40UC CDS74061R0557 0.500 1 50 4437748 S04M-K50UC CDS74061R0577 0.500 1 60 4437755 S04M-K60UC CDS74061R0587 0.500 1 63 443776 S04M-K63UC CDS74061R0607 0.500 1 /4 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 00 series M UC, Z characteristic Universal range S 01 M UC CDC010S001 S 00 M UC, Z characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and big length cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class A/B (Body mounted) according to IEC 61373 (for DC applications, please note polarity of device) I cu =10 ka 401361 S 0 M UC CDC0107S001 A EAN Type code Order code 1 0.5 4431111 S01M-Z0.5UC CDS71061R0158 0.15 10 1 443118 S01M-Z1UC CDS71061R018 0.15 10 1.6 4431135 S01M-Z1.6UC CDS71061R058 0.15 10 443114 S01M-ZUC CDS71061R078 0.15 10 3 4431159 S01M-Z3UC CDS71061R0318 0.15 10 4 4431166 S01M-Z4UC CDS71061R0338 0.15 10 5 4431173 S01M-Z5UC CDS71061R0358 0.15 10 6 4431180 S01M-Z6UC CDS71061R0378 0.15 10 8 4431197 S01M-Z8UC CDS71061R0408 0.15 10 10 443103 S01M-Z10UC CDS71061R048 0.15 10 15 44317 S01M-Z15UC CDS71061R0458 0.15 10 16 443134 S01M-Z16UC CDS71061R0468 0.15 10 0 443141 S01M-Z0UC CDS71061R0488 0.15 10 5 443158 S01M-Z5UC CDS71061R0518 0.15 10 30 443165 S01M-Z30UC CDS71061R058 0.15 10 3 44317 S01M-Z3UC CDS71061R0538 0.15 10 35 443189 S01M-Z35UC CDS71061R0548 0.15 10 40 443196 S01M-Z40UC CDS71061R0558 0.15 10 50 443130 S01M-Z50UC CDS71061R0578 0.15 10 60 4431319 S01M-Z60UC CDS71061R0588 0.15 10 63 443136 S01M-Z63UC CDS71061R0608 0.15 10 DIN-Rail components for rolling stock applications CDC00053D004 /43

MCBs S 00 series M UC, Z characteristic Universal range 401361 A EAN Type code Order code kg pc. CDC0108S001 3 0.5 4435553 S03M-Z0.5UC CDS73061R0158 0.375 1 1 4435560 S03M-Z1UC CDS73061R018 0.375 1 1.6 4435577 S03M-Z1.6UC CDS73061R058 0.375 1 4435584 S03M-ZUC CDS73061R078 0.375 1 S 03 M UC 3 4435591 S03M-Z3UC CDS73061R0318 0.375 1 4 4435607 S03M-Z4UC CDS73061R0338 0.375 1 5 4435614 S03M-Z5UC CDS73061R0358 0.375 1 6 443561 S03M-Z6UC CDS73061R0378 0.375 1 8 4435638 S03M-Z8UC CDS73061R0408 0.375 1 10 4435645 S03M-Z10UC CDS73061R048 0.375 1 15 4435669 S03M-Z15UC CDS73061R0458 0.375 1 16 4435676 S03M-Z16UC CDS73061R0468 0.375 1 0 4435683 S03M-Z0UC CDS73061R0488 0.375 1 S 04 M UC CDC0109S001 5 4435690 S03M-Z5UC CDS73061R0518 0.375 1 30 4435706 S03M-Z30UC CDS73061R058 0.375 1 3 4435713 S03M-Z3UC CDS73061R0538 0.375 1 35 443570 S03M-Z35UC CDS73061R0548 0.375 1 40 4435737 S03M-Z40UC CDS73061R0558 0.375 1 50 4435744 S03M-Z50UC CDS73061R0578 0.375 1 60 4435751 S03M-Z60UC CDS73061R0588 0.375 1 63 4435768 S03M-Z63UC CDS73061R0608 0.375 1 401361 A EAN Type code Order code 4 0.5 4437779 S04M-Z0.5UC CDS74061R0158 0.500 1 1 4437786 S04M-Z1UC CDS74061R018 0.500 1 1.6 4437793 S04M-Z1.6UC CDS74061R058 0.500 1 4437809 S04M-ZUC CDS74061R078 0.500 1 3 4437816 S04M-Z3UC CDS74061R0318 0.500 1 4 443783 S04M-Z4UC CDS74061R0338 0.500 1 5 4437830 S04M-Z5UC CDS74061R0358 0.500 1 6 4437847 S04M-Z6UC CDS74061R0378 0.500 1 8 4437854 S04M-Z8UC CDS74061R0408 0.500 1 10 4437861 S04M-Z10UC CDS74061R048 0.500 1 15 4437885 S04M-Z15UC CDS74061R0458 0.500 1 16 443789 S04M-Z16UC CDS74061R0468 0.500 1 0 4437908 S04M-Z0UC CDS74061R0488 0.500 1 5 4437915 S04M-Z5UC CDS74061R0518 0.500 1 30 44379 S04M-Z30UC CDS74061R058 0.500 1 3 4437939 S04M-Z3UC CDS74061R0538 0.500 1 35 4437946 S04M-Z35UC CDS74061R0548 0.500 1 40 4437953 S04M-Z40UC CDS74061R0558 0.500 1 50 4437960 S04M-Z50UC CDS74061R0578 0.500 1 60 4437977 S04M-Z60UC CDS74061R0588 0.500 1 63 4437984 S04M-Z63UC CDS74061R0608 0.500 1 /44 CDC00053D004 DIN-Rail components for rolling stock applications

DIN-Rail components for rolling stock applications CDC00053D004 /45

MCBs S 00 P series technical features S 00 P Standards Product Standard IEC/EN 60898-1, IEC/EN 60947- S 01 P CSC400056F001 Hazard level acc. to EN 45545- Classification according to NF F 16-101/10 Resistance to shocks and vibrations acc. to IEC 61373 GOST 919-88 approval R6/HL3 I1 / F1 (Exigence 4) Category 1 - Class A/B - body mounted Yes General data Poles 1P, P, 3P, 4P, 1P+N, 3P+N Tripping characteristics B, C, D, K, Z A 0. 63 A frequency f Hz 50/60 Hz insulation voltage U i acc. to IEC/EN 60664-1 V 50 V AC (phase to ground), 500 V AC (phase to phase) Overvoltage category III Pollution degree Data acc. to IEC/EN 60898-1 operational voltage U n V 1P: 30 V AC; P: 400 V AC; 3..4P: 400 V AC (only acc. to IEC/EN 60898-1) 1P: 0 V DC; P: 440 V DC Max. power frequency recovery voltage (U max ) V 1P: 53 V AC; P: 440 V AC; 3..4P: 440 V AC (only acc. to IEC/EN 60898-1) 1P: 50 V DC; P: 500 V DC Min. operating voltage V 1 V AC - 1 V DC short-circuit capacity I cn ka 5A: 5 ka; >5A: 15 ka Energy limiting class (B, C up to 40 A) 3 impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6, kv at sea level; 5 kv at.000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C 30 C Electrical endurance ops. < 3A: 0.000 ops (AC); 3A: 10.000 ops. (AC); 1.000 ops (DC) 1 cycle (s - ON, 13s - OFF, 3A), 1 cycle (s - ON, 8s - OFF, 3A) Data acc. to IEC/EN 60947- operational voltage Ue V 1P: 30 V AC; 1P+N: 30 V AC; 4P: 400 V AC; 3P+N: 400 V AC Max. power frequency recovery voltage (U max ) V 1P: 53 V AC; 1P+N: 53 V AC; 4P: 440 V AC; 3P+N: 440 V AC 1P: 7 V DC; P: 15 V DC Min. operating voltage V 1 V AC - 1 V DC ultimate short-circuit breaking capacity I cu ka 5A: 5 ka; 3A: 15 ka service short-circuit breaking capacity I cs ka 5A: 1.5 ka; 3 40A: 11. ka; 50, 63 A: 7.5 ka impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at.000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C B, C: 55 C; K, Z: 0 C Electrical endurance ops. < 3A: 0,000 ops (AC); 3A: 10,.000 ops. (AC); 1,000 ops (DC) 1 cycle (s - ON, 13s - OFF, 3A), 1 cycle (s - ON, 8s - OFF, 3A) /46 CDC00053D004 DIN-Rail components for rolling stock applications

S00 P Mechanical Housing Insulation group I, RAL 7035 data Toggle Insulation group II, black, sealable Contact position indicator Marking on toggle (I ON / 0 OFF), Real CPI (red ON / green OFF) Protection degree acc. to EN 6059 IP0 (also fulfilling the req. acc. to the protection degree IPXXB); IP40 in enclosure with cover Mechanical endurance ops. 0000 ops. Shock resistance acc. to 30g - 3 shocks - 11ms IEC/EN 60068--7 Vibration resistance acc. to IEC/EN 5g - 0 cycles at 5 150 5 Hz with load 0,8In 60068--6 Environmental conditions (damp heat) C/RH 8 cycles with 55 C/90-96% and 5 C/95-100% acc. to IEC/EN 60068--30 Ambient temperature (with daily average C -5 +55 C +35 C) Storage temperature C -40 +70 C Installation Terminal type failsafe bi-directional cylinder-lift terminal Cross-section of conductors (top/bottom) mm 5 mm²/5 mm² mm 16 mm²/16 mm² AWG 18-4 AWG Cross-section of busbars mm 10 mm²/10 mm² AWG 18-8 AWG Tightening torque Nm.8 Nm in-lbs. 5 in-lbs. Screwdriver No. Pozidriv Mounting On DIN-Rail 35mm acc. to EN 60715 by fast clip Mounting position any Supply optional Dimensions Mounting dimensions acc. to DIN 43880 Mounting dimension 1 and weight Pole dimensions (H x D x W) mm 88 x 69 x 17.5 mm Pole weight g approx. 140 g Combination with auxiliary elements See table pages 4/4 and 4/5 DIN-Rail components for rolling stock applications CDC00053D004 /47

MCBs S 00 series P 5000-15000, B characteristic S 01 P CSC400056F001 S 00 P, B characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and large length of cables in TN and IT systems. Standards: IEC/EN 60898-1 Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =5 ka for 0.5 A 5 A I cn =15 ka for 3 A 63 A 4016779 S 0 P CSC400057F001 A EAN Type code Order code 1 6 589574 S 01 P-B 6 CDS81001R0065 0.14 10 10 589581 S 01 P-B 10 CDS81001R0105 0.14 10 13 589598 S 01 P-B 13 CDS81001R0135 0.14 10 16 58960 S 01 P-B 16 CDS81001R0165 0.14 10 0 589604 S 01 P-B 0 CDS81001R005 0.14 10 5 589611 S 01 P-B 5 CDS81001R055 0.14 10 3 58968 S 01 P-B 3 CDS81001R035 0.14 10 40 589635 S 01 P-B 40 CDS81001R0405 0.14 10 50 589659 S 01 P-B 50 CDS81001R0505 0.14 10 63 589666 S 01 P-B 63 CDS81001R0635 0.14 10 4016779 S 03 P CSC400058F001 A EAN Type code Order code 6 589673 S 0 P-B 6 CDS8001R0065 0.8 5 10 589680 S 0 P-B 10 CDS8001R0105 0.8 5 13 589697 S 0 P-B 13 CDS8001R0135 0.8 5 16 589703 S 0 P-B 16 CDS8001R0165 0.8 5 0 589710 S 0 P-B 0 CDS8001R005 0.8 5 5 58977 S 0 P-B 5 CDS8001R055 0.8 5 3 589734 S 0 P-B 3 CDS8001R035 0.8 5 40 589741 S 0 P-B 40 CDS8001R0405 0.8 5 50 589758 S 0 P-B 50 CDS8001R0505 0.8 5 63 589765 S 0 P-B 63 CDS8001R0635 0.8 5 4016779 A EAN Type code Order code 3 6 58977 S 03 P-B 6 CDS83001R0065 0.4 1 10 589789 S 03 P-B 10 CDS83001R0105 0.4 1 13 589796 S 03 P-B 13 CDS83001R0135 0.4 1 16 58980 S 03 P-B 16 CDS83001R0165 0.4 1 0 589819 S 03 P-B 0 CDS83001R005 0.4 1 5 58986 S 03 P-B 5 CDS83001R055 0.4 1 3 589833 S 03 P-B 3 CDS83001R035 0.4 1 40 589840 S 03 P-B 40 CDS83001R0405 0.4 1 50 589857 S 03 P-B 50 CDS83001R0505 0.4 1 63 589864 S 03 P-B 63 CDS83001R0635 0.4 1 /48 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 CSC400059F001 A EAN Type code Order code 4 6 589871 S 04 P-B 6 CDS84001R0065 0.56 1 10 589888 S 04 P-B 10 CDS84001R0105 0.56 1 13 589895 S 04 P-B 13 CDS84001R0135 0.56 1 S 04 P 16 589901 S 04 P-B 16 CDS84001R0165 0.56 1 0 589918 S 04 P-B 0 CDS84001R005 0.56 1 5 58995 S 04 P-B 5 CDS84001R055 0.56 1 3 58993 S 04 P-B 3 CDS84001R035 0.56 1 40 589949 S 04 P-B 40 CDS84001R0405 0.56 1 50 589956 S 04 P-B 50 CDS84001R0505 0.56 1 63 589963 S 04 P-B 63 CDS84001R0635 0.56 1 CSC400060F001 With disconnecting neutral NA 4016779 S 01 P NA CSC40006F001 A EAN Type code Order code 1+NA 6 589970 S 01 P-B 6 NA CDS81103R0065 0.8 5 10 589987 S 01 P-B 10 NA CDS81103R0105 0.8 5 13 589994 S 01 P-B 13 NA CDS81103R0135 0.8 5 16 590006 S 01 P-B 16 NA CDS81103R0165 0.8 5 0 590013 S 01 P-B 0 NA CDS81103R005 0.8 5 5 59000 S 01 P-B 5 NA CDS81103R055 0.8 5 3 590037 S 01 P-B 3 NA CDS81103R035 0.8 5 40 590044 S 01 P-B 40 NA CDS81103R0405 0.8 5 50 590051 S 01 P-B 50 NA CDS81103R0505 0.8 5 63 590068 S 01 P-B 63 NA CDS81103R0635 0.8 5 S 03 P NA 4016779 A EAN Type code Order code 3+NA 6 590075 S 03 P-B 6 NA CDS83103R0065 0.56 1 10 59008 S 03 P-B 10 NA CDS83103R0105 0.56 1 13 590099 S 03 P-B 13 NA CDS83103R0135 0.56 1 16 590105 S 03 P-B 16 NA CDS83103R0165 0.56 1 0 59011 S 03 P-B 0 NA CDS83103R005 0.56 1 5 59019 S 03 P-B 5 NA CDS83103R055 0.56 1 3 590136 S 03 P-B 3 NA CDS83103R035 0.56 1 40 590143 S 03 P-B 40 NA CDS83103R0405 0.56 1 50 590150 S 03 P-B 50 NA CDS83103R0505 0.56 1 63 590167 S 03 P-B 63 NA CDS83103R0635 0.56 1 DIN-Rail components for rolling stock applications CDC00053D004 /49

MCBs S 00 series P 5000-15000, C characteristic S 01 P CSC400056F001 S 00 P, C characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for resistive and inductive loads with low inrush. Standards: IEC/EN 60898-1 Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =5 ka for 0.5 A 5 A I cn =15 ka for 3 A 63 A 4016779 S 0 P CSC400057F001 A EAN Type code Order code 1 0.5 590174 S 01 P-C 0.5 CDS81001R0984 0.14 10 1 590181 S 01 P-C 1 CDS81001R0014 0.14 10 1,6 590198 S 01 P-C 1.6 CDS81001R0974 0.14 10 59004 S 01 P-C CDS81001R004 0.14 10 3 59011 S 01 P-C 3 CDS81001R0034 0.14 10 4 5908 S 01 P-C 4 CDS81001R0044 0.14 10 6 59035 S 01 P-C 6 CDS81001R0064 0.14 10 8 5904 S 01 P-C 8 CDS81001R0084 0.14 10 10 59059 S 01 P-C 10 CDS81001R0104 0.14 10 13 59066 S 01 P-C 13 CDS81001R0134 0.14 10 16 59073 S 01 P-C 16 CDS81001R0164 0.14 10 0 59080 S 01 P-C 0 CDS81001R004 0.14 10 5 59097 S 01 P-C 5 CDS81001R054 0.14 10 3 590303 S 01 P-C 3 CDS81001R034 0.14 10 40 590310 S 01 P-C 40 CDS81001R0404 0.14 10 50 59037 S 01 P-C 50 CDS81001R0504 0.14 10 63 590334 S 01 P-C 63 CDS81001R0634 0.14 10 4016779 A EAN Type code Order code 0.5 590341 S 0 P-C 0.5 CDS8001R0984 0.8 5 1 590358 S 0 P-C 1 CDS8001R0014 0.8 5 1.6 590365 S 0 P-C 1.6 CDS8001R0974 0.8 5 59037 S 0 P-C CDS8001R004 0.8 5 3 590389 S 0 P-C 3 CDS8001R0034 0.8 5 4 590396 S 0 P-C 4 CDS8001R0044 0.8 5 6 59040 S 0 P-C 6 CDS8001R0064 0.8 5 8 590419 S 0 P-C 8 CDS8001R0084 0.8 5 10 59046 S 0 P-C 10 CDS8001R0104 0.8 5 13 590433 S 0 P-C 13 CDS8001R0134 0.8 5 16 590440 S 0 P-C 16 CDS8001R0164 0.8 5 0 590457 S 0 P-C 0 CDS8001R004 0.8 5 5 590464 S 0 P-C 5 CDS8001R054 0.8 5 3 590471 S 0 P-C 3 CDS8001R034 0.8 5 40 590488 S 0 P-C 40 CDS8001R0404 0.8 5 50 590495 S 0 P-C 50 CDS8001R0504 0.8 5 63 590501 S 0 P-C 63 CDS 8 001 R0634 0.8 5 /50 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 CSC400058F001 A EAN Type code Order code 3 0.5 590518 S 03 P-C 0.5 CDS83001R0984 0.4 1 1 59055 S 03 P-C 1 CDS83001R0014 0.4 1 1.6 59053 S 03 P-C 1.6 CDS83001R0974 0.4 1 590549 S 03 P-C CDS83001R004 0.4 1 S 03 P 3 590556 S 03 P-C 3 CDS83001R0034 0.4 1 4 590563 S 03 P-C 4 CDS83001R0044 0.4 1 6 590570 S 03 P-C 6 CDS83001R0064 0.4 1 8 590587 S 03 P-C 8 CDS83001R0084 0.4 1 10 590594 S 03 P-C 10 CDS83001R0104 0.4 1 13 590600 S 03 P-C 13 CDS83001R0134 0.4 1 16 590617 S 03 P-C 16 CDS83001R0164 0.4 1 CSC400059F001 0 59064 S 03 P-C 0 CDS83001R004 0.4 1 5 590631 S 03 P-C 5 CDS83001R054 0.4 1 3 590648 S 03 P-C 3 CDS83001R034 0.4 1 40 590655 S 03 P-C 40 CDS83001R0404 0.4 1 S 04 P 50 59066 S 03 P-C50 CDS83001R0504 0.4 1 63 590679 S 03 P-C63 CDS83001R0634 0.4 1 4016779 A EAN Type code Order code 4 0.5 590686 S 04 P-C 0.5 CDS84001R0984 0.56 1 1 590693 S 04 P-C 1 CDS84001R0014 0.56 1 1.6 590709 S 04 P-C 1.6 CDS84001R0974 0.56 1 590716 S 04 P-C CDS84001R004 0.56 1 3 59073 S 04 P-C 3 CDS84001R0034 0.56 1 4 590730 S 04 P-C 4 CDS84001R0044 0.56 1 6 590747 S 04 P-C 6 CDS84001R0064 0.56 1 8 590754 S 04 P-C 8 CDS84001R0084 0.56 1 10 590761 S 04 P-C 10 CDS84001R0104 0.56 1 13 590778 S 04 P-C 13 CDS84001R0134 0.56 1 16 590785 S 04 P-C 16 CDS84001R0164 0.56 1 0 59079 S 04 P-C 0 CDS84001R004 0.56 1 5 590808 S 04 P-C 5 CDS84001R054 0.56 1 3 590815 S 04 P-C 3 CDS84001R034 0.56 1 40 5908 S 04 P-C 40 CDS84001R0404 0.56 1 50 590839 S 04 P-C 50 CDS84001R0504 0.56 1 63 590846 S 04 P-C 63 CDS84001R0634 0.56 1 DIN-Rail components for rolling stock applications CDC00053D004 /51

MCBs S 00 series P 5000-15000, C characteristic With disconnecting neutral NA CSC400060F001 4016779 A EAN Type code Order code 1+NA 0.5 590853 S 01 P-C 0.5 NA CDS81103R0984 0.8 5 1 590860 S 01 P-C 1 NA CDS81103R0014 0.8 5 S 01 P NA 1.6 590877 S 01 P-C 1.6 NA CDS81103R0974 0.8 5 590884 S 01 P-C NA CDS81103R004 0.8 5 3 590891 S 01 P-C 3 NA CDS81103R0034 0.8 5 4 590907 S 01 P-C 4 NA CDS81103R0044 0.8 5 6 590914 S 01 P-C 6 NA CDS81103R0064 0.8 5 8 59091 S 01 P-C 8 NA CDS81103R0084 0.8 5 10 590938 S 01 P-C 10 NA CDS81103R0104 0.8 5 13 590945 S 01 P-C 13 NA CDS81103R0134 0.8 5 CSC40006F001 16 59095 S 01 P-C 16 NA CDS81103R0164 0.8 5 0 590969 S 01 P-C 0 NA CDS81103R004 0.8 5 5 590976 S 01 P-C 5 NA CDS81103R054 0.8 5 3 590983 S 01 P-C 3 NA CDS81103R034 0.8 5 S 03 P NA 40 590990 S 01 P-C 40 NA CDS81103R0404 0.8 5 50 591003 S 01 P-C 50 NA CDS81103R0504 0.8 5 63 591010 S 01 P-C 63 NA CDS81103R0634 0.8 5 4016779 A EAN Type code Order code 3+NA 0.5 59107 S 03 P-C 0.5 NA CDS83103R0984 0.56 1 1 591034 S 03 P-C 1 NA CDS83103R0014 0.56 1 1.6 591041 S 03 P-C 1.6 NA CDS83103R0974 0.56 1 591058 S 03 P-C NA CDS83103R004 0.56 1 3 591065 S 03 P-C 3 NA CDS83103R0034 0.56 1 4 59107 S 03 P-C 4 NA CDS83103R0044 0.56 1 6 591089 S 03 P-C 6 NA CDS83103R0064 0.56 1 8 591096 S 03 P-C 8 NA CDS83103R0084 0.56 1 10 59110 S 03 P-C 10 NA CDS83103R0104 0.56 1 13 591119 S 03 P-C 13 NA CDS83103R0134 0.56 1 16 59116 S 03 P-C 16 NA CDS83103R0164 0.56 1 0 591133 S 03 P-C 0 NA CDS83103R004 0.56 1 5 591140 S 03 P-C 5 NA CDS83103R054 0.56 1 3 591157 S 03 P-C 3 NA CDS83103R034 0.56 1 40 591164 S 03 P-C 40 NA CDS83103R0404 0.56 1 50 591171 S 03 P-C 50 NA CDS83103R0504 0.56 1 63 591188 S 03 P-C 63 NA CDS83103R0634 0.56 1 /5 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 00 series P 5000-15000, D characteristic S 01 P CSC400056F001 S 00 P, D characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for circuits which supply loads with high inrush at the circuit closing (LV/LV transformers, breakdown lamps). Standards: IEC/EN 60898-1 Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =5 ka for 0.5 A 5 A I cn =15 ka for 3 A 63 A 4016779 S 0 P CSC400057F001 A EAN Type code Order code 1 0.5 591195 S 01 P-D 0.5 CDS81001R0981 0.14 10 1 59101 S 01 P-D 1 CDS81001R0011 0.14 10 1.6 59118 S 01 P-D 1.6 CDS81001R0971 0.14 10 5915 S 01 P-D CDS81001R001 0.14 10 3 5913 S 01 P-D 3 CDS81001R0031 0.14 10 4 59149 S 01 P-D 4 CDS81001R0041 0.14 10 6 59156 S 01 P-D 6 CDS81001R0061 0.14 10 8 59163 S 01 P-D 8 CDS81001R0081 0.14 10 10 59170 S 01 P-D 10 CDS81001R0101 0.14 10 13 59187 S 01 P-D 13 CDS81001R0131 0.14 10 16 59194 S 01 P-D 16 CDS81001R0161 0.14 10 0 591300 S 01 P-D 0 CDS81001R001 0.14 10 5 591317 S 01 P-D 5 CDS81001R051 0.14 10 3 59134 S 01 P-D 3 CDS81001R031 0.14 10 40 591331 S 01 P-D 40 CDS81001R0401 0.14 10 50 591348 S 01 P-D 50 CDS81001R0501 0.14 10 63 591355 S 01 P-D 63 CDS81001R0631 0.14 10 4016779 A EAN Type code Order code 0.5 59136 S 0 P-D 0.5 CDS8001R0981 0.8 5 1 591379 S 0 P-D 1 CDS8001R0011 0.8 5 1.6 591386 S 0 P-D 1.6 CDS8001R0971 0.8 5 591393 S 0 P-D CDS8001R001 0.8 5 3 591409 S 0 P-D 3 CDS8001R0031 0.8 5 4 591416 S 0 P-D 4 CDS8001R0041 0.8 5 6 59143 S 0 P-D 6 CDS8001R0061 0.8 5 8 591430 S 0 P-D 8 CDS8001R0081 0.8 5 10 591447 S 0 P-D 10 CDS8001R0101 0.8 5 13 591454 S 0 P-D 13 CDS8001R0131 0.8 5 16 591461 S 0 P-D 16 CDS8001R0161 0.8 5 0 591478 S 0 P-D 0 CDS8001R001 0.8 5 5 591485 S 0 P-D 5 CDS8001R051 0.8 5 3 59149 S 0 P-D 3 CDS8001R031 0.8 5 40 591508 S 0 P-D 40 CDS8001R0401 0.8 5 50 591515 S 0 P-D 50 CDS8001R0501 0.8 5 63 5915 S 0 P-D 63 CDS8001R0631 0.8 5 DIN-Rail components for rolling stock applications CDC00053D004 /53

MCBs S 00 series P 5000-15000, D characteristic 4016779 A EAN Type code Order code kg pc. CSC400058F001 3 0.5 591539 S 03 P-D 0.5 CDS83001R0981 0.4 1 1 591546 S 03 P-D 1 CDS83001R0011 0.4 1 1.6 591553 S 03 P-D 1.6 CDS83001R0971 0.4 1 591560 S 03 P-D CDS83001R001 0.4 1 S 03 P 3 591577 S 03 P-D 3 CDS83001R0031 0.4 1 4 591584 S 03 P-D 4 CDS83001R0041 0.4 1 6 591591 S 03 P-D 6 CDS83001R0061 0.4 1 8 591607 S 03 P-D 8 CDS83001R0081 0.4 1 10 591614 S 03 P-D 10 CDS83001R0101 0.4 1 13 59161 S 03 P-D 13 CDS83001R0131 0.4 1 16 591638 S 03 P-D 16 CDS83001R0161 0.4 1 0 591645 S 03 P-D 0 CDS83001R001 0.4 1 CSC400059F001 5 59165 S 03 P-D 5 CDS83001R051 0.4 1 3 591669 S 03 P-D 3 CDS83001R031 0.4 1 40 591676 S 03 P-D 40 CDS83001R0401 0.4 1 50 591683 S 03 P-D50 CDS83001R0501 0.4 1 S 04 P 63 591690 S 03 P-D63 CDS83001R0631 0.4 1 4016779 A EAN Type code Order code 4 0.5 591706 S 04 P-D 0.5 CDS84001R0981 0.56 1 1 591713 S 04 P-D 1 CDS84001R0011 0.56 1 1.6 59170 S 04 P-D 1.6 CDS84001R0971 0.56 1 591737 S 04 P-D CDS84001R001 0.56 1 3 591744 S 04 P-D 3 CDS84001R0031 0.56 1 4 591751 S 04 P-D 4 CDS84001R0041 0.56 1 6 591768 S 04 P-D 6 CDS84001R0061 0.56 1 8 591775 S 04 P-D 8 CDS84001R0081 0.56 1 10 59178 S 04 P-D 10 CDS84001R0101 0.56 1 13 591799 S 04 P-D 13 CDS84001R0131 0.56 1 16 591805 S 04 P-D 16 CDS84001R0161 0.56 1 0 59181 S 04 P-D 0 CDS84001R001 0.56 1 5 59189 S 04 P-D 5 CDS84001R051 0.56 1 3 591836 S 04 P-D 3 CDS84001R031 0.56 1 40 591843 S 04 P-D 40 CDS84001R0401 0.56 1 50 591850 S 04 P-D 50 CDS84001R0501 0.56 1 63 591867 S 04 P-D 63 CDS84001R0631 0.56 1 /54 CDC00053D004 DIN-Rail components for rolling stock applications

With disconnecting neutral NA CSC400060F001 4016779 A EAN Type code Order code 1+NA 0.5 591874 S 01 P-D 0.5 NA CDS81103R0981 0.8 5 1 591881 S 01 P-D 1 NA CDS81103R0011 0.8 5 S 01 P NA 1.6 591898 S 01 P-D 1.6 NA CDS81103R0971 0.8 5 591904 S 01 P-D NA CDS81103R001 0.8 5 3 591911 S 01 P-D 3 NA CDS81103R0031 0.8 5 4 59198 S 01 P-D 4 NA CDS81103R0041 0.8 5 6 591935 S 01 P-D 6 NA CDS81103R0061 0.8 5 8 59194 S 01 P-D 8 NA CDS81103R0081 0.8 5 10 591959 S 01 P-D 10 NA CDS81103R0101 0.8 5 13 591966 S 01 P-D 13 NA CDS81103R0131 0.8 5 16 591973 S 01 P-D 16 NA CDS81103R0161 0.8 5 CSC40006F001 0 591980 S 01 P-D 0 NA CDS81103R001 0.8 5 5 591997 S 01 P-D 5 NA CDS81103R051 0.8 5 3 59000 S 01 P-D 3 NA CDS81103R031 0.8 5 S 03 P NA 40 59017 S 01 P-D 40 NA CDS81103R0401 0.8 5 50 5904 S 01 P-D 50 NA CDS81103R0501 0.8 5 63 59031 S 01 P-D 63 NA CDS81103R0631 0.8 5 4016779 In A EAN Type code Order code 3+NA 0.5 59048 S 03 P-D 0.5 NA CDS83103R0981 0.56 1 1 59055 S 03 P-D 1 NA CDS83103R0011 0.56 1 1.6 5906 S 03 P-D 1.6 NA CDS83103R0971 0.56 1 59079 S 03 P-D NA CDS83103R001 0.56 1 3 59086 S 03 P-D 3 NA CDS83103R0031 0.56 1 4 59093 S 03 P-D 4 NA CDS83103R0041 0.56 1 6 59109 S 03 P-D 6 NA CDS83103R0061 0.56 1 8 59116 S 03 P-D 8 NA CDS83103R0081 0.56 1 10 5913 S 03 P-D 10 NA CDS83103R0101 0.56 1 13 59130 S 03 P-D 13 NA CDS83103R0131 0.56 1 16 59147 S 03 P-D 16 NA CDS83103R0161 0.56 1 0 59154 S 03 P-D 0 NA CDS83103R001 0.56 1 5 59161 S 03 P-D 5 NA CDS83103R051 0.56 1 3 59178 S 03 P-D 3 NA CDS83103R031 0.56 1 40 59185 S 03 P-D 40 NA CDS83103R0401 0.56 1 50 5919 S 03 P-D 50 NA CDS83103R0501 0.56 1 63 5908 S 03 P-D 63 NA CDS83103R0631 0.56 1 DIN-Rail components for rolling stock applications CDC00053D004 /55

MCBs S 00 series P 5000-15000, K characteristic S 01 P CSC40000F001 S 00 P, K (power) characteristic Function: protection and control of the circuits like motors, transformers and auxiliary circuits, against overloads and short-circuits. Advantages: no nuisance tripping in the case of functional peak s up to 10xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu =5 ka for 0.5 A 5 A; I cu =15 ka for 3 A 63 A 4016779 A EAN Type code Order code 1 0. 5915 S 01 P-K 0. CDS81001R0087 0.14 10 0.3 59 S 01 P-K 0.3 CDS81001R0117 0.14 10 0.5 5939 S 01 P-K 0.5 CDS81001R0157 0.14 10 0.75 5946 S 01 P-K 0.75 CDS81001R0187 0.14 10 1 5953 S 01 P-K 1 CDS81001R017 0.14 10 1.6 5960 S 01 P-K 1.6 CDS81001R057 0.14 10 5977 S 01 P-K CDS81001R077 0.14 10 3 5984 S 01 P-K 3 CDS81001R0317 0.14 10 4 5991 S 01 P-K 4 CDS81001R0337 0.14 10 6 59307 S 01 P-K 6 CDS81001R0377 0.14 10 8 59314 S 01 P-K 8 CDS81001R0407 0.14 10 10 5931 S 01 P-K 10 CDS81001R047 0.14 10 13 59338 S 01 P-K 13 CDS81001R0447 0.14 10 16 59345 S 01 P-K 16 CDS81001R0467 0.14 10 0 5935 S 01 P-K 0 CDS81001R0487 0.14 10 5 59369 S 01 P-K 5 CDS81001R0517 0.14 10 3 59376 S 01 P-K 3 CDS81001R0537 0.14 10 40 59383 S 01 P-K 40 CDS81001R0557 0.14 10 50 59390 S 01 P-K 50 CDS81001R0577 0.14 10 63 59406 S 01 P-K 63 CDS81001R0607 0.14 10 /56 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 A EAN Type code Order code kg pc. CSC400004F001 0. 59413 S 0 P-K 0. CDS8001R0087 0.8 5 0.3 5940 S 0 P-K 0.3 CDS8001R0117 0.8 5 0.5 59437 S 0 P-K 0.5 CDS8001R0157 0.8 5 0.75 59444 S 0 P-K 0.75 CDS8001R0187 0.8 5 1 59451 S 0 P-K 1 CDS8001R017 0.8 5 S 0 P 1.6 59468 S 0 P-K 1.6 CDS8001R057 0.8 5 59475 S 0 P-K CDS8001R077 0.8 5 3 5948 S 0 P-K 3 CDS8001R0317 0.8 5 4 59499 S 0 P-K 4 CDS8001R0337 0.8 5 6 59505 S 0 P-K 6 CDS8001R0377 0.8 5 8 5951 S 0 P-K 8 CDS8001R0407 0.8 5 10 5959 S 0 P-K 10 CDS8001R047 0.8 5 CSC40018F001 13 59536 S 0 P-K 13 CDS8001R0447 0.8 5 16 59543 S 0 P-K 16 CDS8001R0467 0.8 5 0 59550 S 0 P-K 0 CDS8001R0487 0.8 5 5 59567 S 0 P-K 5 CDS8001R0517 0.8 5 3 59574 S 0 P-K 3 CDS8001R0537 0.8 5 S 03 P 40 59581 S 0 P-K 40 CDS8001R0557 0.8 5 50 59598 S 0 P-K 50 CDS8001R0577 0.8 5 63 59604 S 0 P-K 63 CDS8001R0607 0.8 5 4016779 A EAN Type code Order code 3 0. 59611 S 03 P-K 0. CDS83001R0087 0.4 1 0.3 5968 S 03 P-K 0.3 CDS83001R0117 0.4 1 0.5 59635 S 03 P-K 0.5 CDS83001R0157 0.4 1 0.75 5964 S 03 P-K 0.75 CDS83001R0187 0.4 1 1 59659 S 03 P-K 1 CDS83001R017 0.4 1 1.6 59666 S 03 P-K 1.6 CDS83001R057 0.4 1 59673 S 03 P-K CDS83001R077 0.4 1 3 59680 S 03 P-K 3 CDS83001R0317 0.4 1 4 59697 S 03 P-K 4 CDS83001R0337 0.4 1 6 59703 S 03 P-K 6 CDS83001R0377 0.4 1 8 59710 S 03 P-K 8 CDS83001R0407 0.4 1 10 5977 S 03 P-K 10 CDS83001R047 0.4 1 13 59734 S 03 P-K 13 CDS83001R0447 0.4 1 16 59741 S 03 P-K 16 CDS83001R0467 0.4 1 0 59758 S 03 P-K 0 CDS83001R0487 0.4 1 5 59765 S 03 P-K 5 CDS83001R0517 0.4 1 3 5977 S 03 P-K 3 CDS83001R0537 0.4 1 40 59789 S 03 P-K 40 CDS83001R0557 0.4 1 50 59796 S 03 P-K 50 CDS83001R0577 0.4 1 63 5980 S 03 P-K 63 CDS83001R0607 0.4 1 DIN-Rail components for rolling stock applications CDC00053D004 /57

MCBs S 00 series P 5000-15000, K characteristic 4016779 A EAN Type code Order code kg pc. CSC400059F001 4 0. 59819 S 04 P-K 0. CDS84001R0087 0.56 1 0.3 5986 S 04 P-K 0.3 CDS84001R0117 0.56 1 0.5 59833 S 04 P-K 0.5 CDS84001R0157 0.56 1 0.75 59840 S 04 P-K 0.75 CDS84001R0187 0.56 1 S 04 P 1 59857 S 04 P-K 1 CDS84001R017 0.56 1 1.6 59864 S 04 P-K 1.6 CDS84001R057 0.56 1 59871 S 04 P-K CDS84001R077 0.56 1 3 59888 S 04 P-K 3 CDS84001R0317 0.56 1 4 59895 S 04 P-K 4 CDS84001R0337 0.56 1 6 59901 S 04 P-K 6 CDS84001R0377 0.56 1 8 59918 S 04 P-K 8 CDS84001R0407 0.56 1 10 5995 S 04 P-K 10 CDS84001R047 0.56 1 CSC400003F001 13 5993 S 04 P-K 13 CDS84001R0447 0.56 1 16 59949 S 04 P-K 16 CDS84001R0467 0.56 1 0 59956 S 04 P-K 0 CDS84001R0487 0.56 1 5 59963 S 04 P-K 5 CDS84001R0517 0.56 1 S 01 P NA 3 59970 S 04 P-K 3 CDS84001R0537 0.56 1 40 59987 S 04 P-K 40 CDS84001R0557 0.56 1 50 59994 S 04 P-K 50 CDS84001R0577 0.56 1 63 593007 S 04 P-K 63 CDS84001R0607 0.56 1 With disconnecting neutral NA 4016779 A EAN Type code Order code 1+NA 0. 593014 S 01 P-K 0. NA CDS81103R0087 0.8 5 0.3 59301 S 01 P-K 0.3 NA CDS81103R0117 0.8 5 0.5 593038 S 01 P-K 0.5 NA CDS81103R0157 0.8 5 0.75 593045 S 01 P-K 0.75 NA CDS81103R0187 0.8 5 1 59305 S 01 P-K 1 NA CDS81103R017 0.8 5 1.6 593069 S 01 P-K 1.6 NA CDS81103R057 0.8 5 593076 S 01 P-K NA CDS81103R077 0.8 5 3 593083 S 01 P-K 3 NA CDS81103R0317 0.8 5 4 593090 S 01 P-K 4 NA CDS81103R0337 0.8 5 6 593106 S 01 P-K 6 NA CDS81103R0377 0.8 5 8 593113 S 01 P-K 8 NA CDS81103R0407 0.8 5 10 59310 S 01 P-K 10 NA CDS81103R047 0.8 5 13 593137 S 01 P-K 13 NA CDS81103R0447 0.8 5 16 593144 S 01 P-K 16 NA CDS81103R0467 0.8 5 0 593151 S 01 P-K 0 NA CDS81103R0487 0.8 5 5 593168 S 01 P-K 5 NA CDS81103R0517 0.8 5 3 593175 S 01 P-K 3 NA CDS81103R0537 0.8 5 40 59318 S 01 P-K 40 NA CDS81103R0557 0.8 5 50 593199 S 01 P-K 50 NA CDS81103R0577 0.8 5 63 59305 S 01 P-K 63 NA CDS81103R0607 0.8 5 /58 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 A EAN Type code Order code kg pc. CSC40013F001 3+NA 0. 5931 S 03 P-K 0. NA CDS83103R0087 0.56 0.3 5939 S 03 P-K 0.3 NA CDS83103R0117 0.56 0.5 59336 S 03 P-K 0.5 NA CDS83103R0157 0.56 0.75 59343 S 03 P-K 0.75 NA CDS83103R0187 0.56 S 03 P NA 1 59350 S 03 P-K 1 NA CDS83103R017 0.56 1.6 59367 S 03 P-K 1.6 NA CDS83103R057 0.56 59374 S 03 P-K NA CDS83103R077 0.56 3 59381 S 03 P-K 3 NA CDS83103R0317 0.56 4 59398 S 03 P-K 4 NA CDS83103R0337 0.56 6 593304 S 03 P-K 6 NA CDS83103R0377 0.56 8 593311 S 03 P-K 8 NA CDS83103R0407 0.56 10 59338 S 03 P-K 10 NA CDS83103R047 0.56 13 593335 S 03 P-K 13 NA CDS83103R0447 0.56 16 59334 S 03 P-K 16 NA CDS83103R0467 0.56 0 593359 S 03 P-K 0 NA CDS83103R0487 0.56 5 593366 S 03 P-K 5 NA CDS83103R0517 0.56 3 593373 S 03 P-K 3 NA CDS83103R0537 0.56 40 593380 S 03 P-K 40 NA CDS83103R0557 0.56 50 593397 S 03 P-K 50 NA CDS83103R0577 0.56 63 593403 S 03 P-K 63 NA CDS83103R0607 0.56 DIN-Rail components for rolling stock applications CDC00053D004 /59

MCBs S 00 series P 5000-15000, Z characteristic S 01 P CSC40000F001 S 00 P, Z characteristic Function: protection and control of the electronic circuits against lower and long duration overloads and short-circuits. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu =5 ka for 0.5 A 5 A; I cu =15 ka for 3 A 63 A 4016779 S 0 P CSC400004F001 A EAN Type code Order code 1 0.5 593410 S 01 P-Z 0.5 CDS81001R0158 0.14 10 1 59347 S 01 P-Z 1 CDS81001R018 0.14 10 1.6 593434 S 01 P-Z 1.6 CDS81001R058 0.14 10 593441 S 01 P-Z CDS81001R078 0.14 10 3 593458 S 01 P-Z 3 CDS81001R0318 0.14 10 4 593465 S 01 P-Z 4 CDS81001R0338 0.14 10 6 59347 S 01 P-Z 6 CDS81001R0378 0.14 10 8 593489 S 01 P-Z 8 CDS81001R0408 0.14 10 10 593496 S 01 P-Z 10 CDS81001R048 0.14 10 16 59350 S 01 P-Z 16 CDS81001R0468 0.14 10 0 593519 S 01 P-Z 0 CDS81001R0488 0.14 10 5 59356 S 01 P-Z 5 CDS81001R0518 0.14 10 3 593533 S 01 P-Z 3 CDS81001R0538 0.14 10 40 593540 S 01 P-Z 40 CDS81001R0558 0.14 10 50 593557 S 01 P-Z 50 CDS81001R0578 0.14 10 63 593564 S 01 P-Z 63 CDS81001R0608 0.14 10 4016779 A EAN Type code Order code 0.5 593571 S 0 P-Z 0.5 CDS8001R0158 0.8 5 1 593588 S 0 P-Z 1 CDS8001R018 0.8 5 1.6 593595 S 0 P-Z 1.6 CDS8001R058 0.8 5 593601 S 0 P-Z CDS8001R078 0.8 5 3 593618 S 0 P-Z 3 CDS8001R0318 0.8 5 4 59365 S 0 P-Z 4 CDS8001R0338 0.8 5 6 59363 S 0 P-Z 6 CDS8001R0378 0.8 5 8 593649 S 0 P-Z 8 CDS8001R0408 0.8 5 10 593656 S 0 P-Z 10 CDS8001R048 0.8 5 16 593663 S 0 P-Z 16 CDS8001R0468 0.8 5 0 593670 S 0 P-Z 0 CDS8001R0488 0.8 5 5 593687 S 0 P-Z 5 CDS8001R0518 0.8 5 3 593694 S 0 P-Z 3 CDS8001R0538 0.8 5 40 593700 S 0 P-Z 40 CDS8001R0558 0.8 5 50 593717 S 0 P-Z 50 CDS8001R0578 0.8 5 63 59374 S 0 P-Z 63 CDS8001R0608 0.8 5 /60 CDC00053D004 DIN-Rail components for rolling stock applications

4016779 A EAN Type code Order code kg pc. CSC40018F001 3 0.5 593731 S 03 P-Z 0.5 CDS83001R0158 0.4 1 1 593748 S 03 P-Z 1 CDS83001R018 0.4 1 1.6 593755 S 03 P-Z 1.6 CDS83001R058 0.4 1 59376 S 03 P-Z CDS83001R078 0.4 1 S 03 P 3 593779 S 03 P-Z 3 CDS83001R0318 0.4 1 4 593786 S 03 P-Z 4 CDS83001R0338 0.4 1 6 593793 S 03 P-Z 6 CDS83001R0378 0.4 1 8 593809 S 03 P-Z 8 CDS83001R0408 0.4 1 10 593816 S 03 P-Z 10 CDS83001R048 0.4 1 16 59383 S 03 P-Z 16 CDS83001R0468 0.4 1 0 593830 S 03 P-Z 0 CDS83001R0488 0.4 1 5 593847 S 03 P-Z 5 CDS83001R0518 0.4 1 CSC40013F001 3 593854 S 03 P-Z 3 CDS83001R0538 0.4 1 40 593861 S 03 P-Z 40 CDS83001R0558 0.4 1 50 593878 S 03 P-Z 50 CDS83001R0578 0.4 1 63 593885 S 03 P-Z 63 CDS83001R0608 0.4 1 S 04 P 4016779 A EAN Type code Order code 4 0.5 59389 S 04 P-Z 0.5 CDS84001R0158 0.56 1 1 593908 S 04 P-Z 1 CDS84001R018 0.56 1 1.6 593915 S 04 P-Z 1.6 CDS84001R058 0.56 1 5939 S 04 P-Z CDS84001R078 0.56 1 3 593939 S 04 P-Z 3 CDS84001R0318 0.56 1 4 593946 S 04 P-Z 4 CDS84001R0338 0.56 1 6 593953 S 04 P-Z 6 CDS84001R0378 0.56 1 8 593960 S 04 P-Z 8 CDS84001R0408 0.56 1 10 593977 S 04 P-Z 10 CDS84001R048 0.56 1 16 593984 S 04 P-Z 16 CDS84001R0468 0.56 1 0 593991 S 04 P-Z 0 CDS84001R0488 0.56 1 5 594004 S 04 P-Z 5 CDS84001R0518 0.56 1 3 594011 S 04 P-Z 3 CDS84001R0538 0.56 1 40 59408 S 04 P-Z 40 CDS84001R0558 0.56 1 50 594035 S 04 P-Z 50 CDS84001R0578 0.56 1 63 59404 S 04 P-Z 63 CDS84001R0608 0.56 1 DIN-Rail components for rolling stock applications CDC00053D004 /61

MCBs S 00 series P 5000-15000, Z characteristic With disconnecting neutral NA CSC400003F001 4016779 A EAN Type code Order code 1+NA 0.5 594059 S 01 P-Z 0.5 NA CDS81103R0158 0.8 5 1 594066 S 01 P-Z 1 NA CDS81103R018 0.8 5 1.6 594073 S 01 P-Z 1.6 NA CDS81103R058 0.8 5 S 01 P NA 594080 S 01 P-Z NA CDS81103R078 0.8 5 3 594097 S 01 P-Z 3 NA CDS81103R0318 0.8 5 4 594103 S 01 P-Z 4 NA CDS81103R0338 0.8 5 6 594110 S 01 P-Z 6 NA CDS81103R0378 0.8 5 8 59417 S 01 P-Z 8 NA CDS81103R0408 0.8 5 10 594134 S 01 P-Z 10 NA CDS81103R048 0.8 5 16 594141 S 01 P-Z 16 NA CDS81103R0468 0.8 5 0 594158 S 01 P-Z 0 NA CDS81103R0488 0.8 5 CSC40013F001 5 594165 S 01 P-Z 5 NA CDS81103R0518 0.8 5 3 59417 S 01 P-Z 3 NA CDS81103R0538 0.8 5 40 594189 S 01 P-Z 40 NA CDS81103R0558 0.8 5 S 03 P NA 50 594196 S 01 P-Z 50 NA CDS81103R0578 0.8 5 63 5940 S 01 P-Z 63 NA CDS81103R0608 0.8 5 4016779 A EAN Type code Order code 3+NA 0.5 59419 S 03 P-Z 0.5 NA CDS83103R0158 0.56 1 1 5946 S 03 P-Z 1 NA CDS83103R018 0.56 1 1.6 59433 S 03 P-Z 1.6 NA CDS83103R058 0.56 1 59440 S 03 P-Z NA CDS83103R078 0.56 1 3 59457 S 03 P-Z 3 NA CDS83103R0318 0.56 1 4 59464 S 03 P-Z 4 NA CDS83103R0338 0.56 1 6 59471 S 03 P-Z 6 NA CDS83103R0378 0.56 1 8 59488 S 03 P-Z 8 NA CDS83103R0408 0.56 1 10 59495 S 03 P-Z 10 NA CDS83103R048 0.56 1 16 594301 S 03 P-Z 16 NA CDS83103R0468 0.56 1 0 594318 S 03 P-Z 0 NA CDS83103R0488 0.56 1 5 59435 S 03 P-Z 5 NA CDS83103R0518 0.56 1 3 59433 S 03 P-Z 3 NA CDS83103R0538 0.56 1 40 594349 S 03 P-Z 40 NA CDS83103R0558 0.56 1 50 594356 S 03 P-Z 50 NA CDS83103R0578 0.56 1 63 594363 S 03 P-Z 63 NA CDS83103R0608 0.56 1 /6 CDC00053D004 DIN-Rail components for rolling stock applications

DIN-Rail components for rolling stock applications CDC00053D004 /63

MCBs S 80 UC series technical features S 80 UC CSC400474F001 S 80 UC Standards Product Standard IEC/EN 60898-, IEC/EN 60947- Hazard level acc. to EN 45545- R6/HL3 Classification according to NF F 16-101/10 I1 / F1 (Exigence 4) Resistance to shocks and vibrations Category 1 - Class A/B - body mounted acc. to IEC 61373 GOST 919-88 approval Yes General data Poles 1P, P, 3P, 4P Tripping characteristics B, K, Z A 0. 63 A frequency f Hz 50/60 Hz insulation voltage U i acc. to IEC/EN 60664-1 V 50 V AC (phase to ground), 500 V AC (phase to phase) Overvoltage category III Pollution degree 3 Data acc. to IEC/EN operational voltage U n V 1P: 30 V AC; P: 400 V AC 1P: 0 V DC; P: 400 V DC 60898-1 Max. power frequency recovery voltage (U max ) V 1P: 53 V AC;...4P: 440 V AC 1P: 4 V DC; 4P: 484 V DC Min. operating voltage V 1 V AC - 1 V DC short-circuit capacity I cn ka 40A: 6 ka; >40A: 4.5 ka Energy limiting class (B, C up to 40 A) 3 impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at,000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C B: 30 C; K, Z: 0 C Electrical endurance ops. 10,000 ops (AC), 1,000 ops (DC) 1 cycle (s - ON, 13s - OFF, 3A), 1 cycle (s - ON, 8s - OFF, 3A) Data acc. to operational voltage U e V 1P: 0 V DC; 4P: 440 V DC IEC/EN 60947- Max. power frequency recovery voltage (U max ) V 1P: 53 V AC;...4P: 440 V AC 1P: 4 V DC; 4P: 484 V DC Min. operating voltage V 1 V AC ultimate short-circuit breaking capacity I cu ka 40A: 6 ka; >40A: 4.5 ka service short-circuit breaking capacity I cs ka 40A: 6 ka; >40A: 4.5 ka impulse withstand voltage U imp. (1./50μs) kv 4 kv (test voltage 6. kv at sea level; 5 kv at,000 m) Dielectric test voltage kv kv (50/60 Hz, 1 min) Reference temperature for tripping characteristics C B: 55 C; K, Z: 0 C Electrical endurance ops. 10,000 ops (AC), 1,000 ops (DC) 1 cycle (s - ON, 13s - OFF, 3A), 1 cycle (s - ON, 8s - OFF, 3A) /64 CDC00053D004 DIN-Rail components for rolling stock applications

S 80 UC Mechanical Housing Insulation group I, RAL 7035 data Toggle Insulation group II, black, sealable Contact position indicator Marking on toggle (I ON / 0 OFF), Real CPI (red ON / green OFF) Protection degree acc. to EN 6059 IP0 (also fulfilling the req. acc. to the protection degree IPXXB); IP40 in enclosure with cover Mechanical endurance ops. 0.000 Shock resistance acc. to IEC/EN 60068--7 30g - 3 shocks - 11ms Vibration resistance acc. to IEC/EN 60068--6 5g - 0 cycles at 5 150 5 Hz with load 0.8 Environmental conditions (damp heat) C/RH 8 cycles with 55 C/90-96% and 5 C/95-100% acc. to IEC/EN 60068--30 Ambient temperature (with daily average +35 C) C -5 +55 C Storage temperature C -40 +70 C Installation Terminal type cage (shock protected) Cross-section of conductors (top/bottom) mm 5 mm²/5 mm² mm 16 mm²/16 mm² AWG 18-4 AWG Cross-section of busbars mm 16 mm²/16 mm² AWG Tightening torque Nm,5 Nm in-lbs. 17.5 in-lbs. Screwdriver No. Pozidriv Mounting On DIN-Rail 35mm acc. to EN 60715 by fast clip Mounting position any Supply Please note polarity of device Dimensions and weight Combination with auxiliary elements Mounting dimensions acc. to DIN 43880 Mounting dimension 1 Pole dimensions (H x D x W) mm 90 x 69 x 17.5 mm Pole weight g approx. 140 g See table page 4/17 DIN-Rail components for rolling stock applications CDC00053D004 /65

MCBs S 80 series UC, B characteristic universal range S 81 UC CSC400474F001 S 80 series UC, B characteristic Function: protection and control of the circuits against overloads and short-circuits; protection for people and large length of cables in TN and IT systems; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60898- Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =6 ka 4016779 CSC400475F001 A EAN Type code Order code 1 6 1630 S81-UC B 6 GHS810164R0065 0.130 10/40 10 16401 S81-UC B10 GHS810164R0105 0.130 10/40 16 16500 S81-UC B16 GHS810164R0165 0.130 10/40 0 16609 S81-UC B0 GHS810164R005 0.130 10/40 5 16708 S81-UC B5 GHS810164R055 0.130 10/40 S 8 UC 4016779 A EAN Type code Order code 6 16807 S8-UC B 6 GHS80164R0065 0.60 5/0 10 16906 S8-UC B10 GHS80164R0105 0.60 5/0 16 16300 S8-UC B16 GHS80164R0165 0.60 5/0 0 163101 S8-UC B0 GHS80164R005 0.60 5/0 5 16300 S8-UC B5 GHS80164R055 0.60 5/0 /66 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S 80 series UC, K characteristic universal range S 81 UC CSC400474F001 S 80 series UC, K (power) characteristic Function: protection and control of the circuits like motors and auxiliary circuits, against overloads and short-circuits; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Advantages: no nuisance tripping in the case of functional peak s up to 8xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu =6 ka for 0, A 40 A I cu =4,5 ka for 50 A 63 A 40133 A EAN Type code Order code 1 0. 63400 S 81 UC-K 0. GHS810164R0087 0.130 10/40 0.3 634309 S 81 UC-K 0.3 GHS810164R0117 0.130 10/40 0.5 634408 S 81 UC-K 0.5 GHS810164R0157 0.130 10/40 0.75 635504 S 81 UC-K 0.75 GHS810164R0187 0.130 10/40 1 634606 S 81 UC-K 1 GHS810164R017 0.130 10/40 1.6 634705 S 81 UC-K 1.6 GHS810164R057 0.130 10/40 634804 S 81 UC-K GHS810164R077 0.130 10/40 3 634903 S 81 UC-K 3 GHS810164R0317 0.130 10/40 4 635009 S 81 UC-K 4 GHS810164R0337 0.130 10/40 6 63507 S 81 UC-K 6 GHS810164R0377 0.130 10/40 8 635108 S 81 UC-K 8 GHS810164R0407 0.130 10/40 10 635306 S 81 UC-K 10 GHS810164R047 0.130 10/40 16 635405 S 81 UC-K 16 GHS810164R0467 0.130 10/40 0 635603 S 81 UC-K 0 GHS810164R0487 0.130 10/40 5 63570 S 81 UC-K 5 GHS810164R0517 0.130 10/40 3 635801 S 81 UC-K 3 GHS810164R0537 0.130 10/40 40 635900 S 81 UC-K 40 GHS810164R0557 0.130 10/40 50 636006 S 81 UC-K 50 GHS810164R0577 0.160 10/40 63 636105 S 81 UC-K 63 GHS810164R0607 0.160 10/40 DIN-Rail components for rolling stock applications CDC00053D004 /67

MCBs S 80 series UC, K characteristic universal range 40133 CSC400475F001 A EAN Type code Order code 0. 63604 S 8 UC-K 0. GHS80164R0087 0.60 5/0 0.3 636303 S 8 UC-K 0.3 GHS80164R0117 0.60 5/0 0.5 63640 S 8 UC-K 0.5 GHS80164R0157 0.60 5/0 S 8 UC 0.75 636501 S 8 UC-K 0.75 GHS80164R0187 0.60 5/0 1 636600 S 8 UC-K 1 GHS80164R017 0.60 5/0 1.6 636709 S 8 UC-K 1.6 GHS80164R057 0.60 5/0 65808 S 8 UC-K GHS80164R077 0.60 5/0 3 636808 S 8 UC-K 3 GHS80164R0317 0.60 5/0 4 636907 S 8 UC-K 4 GHS80164R0337 0.60 5/0 6 637003 S 8 UC-K 6 GHS80164R0377 0.60 5/0 8 63710 S 8 UC-K 8 GHS80164R0407 0.60 5/0 10 63701 S 8 UC-K 10 GHS80164R047 0.60 5/0 CSC400478F001 16 637300 S 8 UC-K 16 GHS80164R0467 0.60 5/0 0 637409 S 8 UC-K 0 GHS80164R0487 0.60 5/0 5 637508 S 8 UC-K 5 GHS80164R0517 0.60 5/0 S 83 UC 3 637607 S 8 UC-K 3 GHS80164R0537 0.60 5/0 40 637706 S 8 UC-K 40 GHS80164R0557 0.60 5/0 50 637904 S 8 UC-K 50 GHS80164R0577 0.30 5/0 63 638000 S 8 UC-K 63 GHS80164R0607 0.30 5/0 40133 A EAN Type code Order code 3 0. 738106 S 83 UC-K 0. GHS830164R0087 0.390 3/1 0.3 73805 S 83 UC-K 0.3 GHS830164R0117 0.390 3/1 0.5 738304 S 83 UC-K 0.5 GHS830164R0157 0.390 3/1 0.75 738403 S 83 UC-K 0.75 GHS830164R0187 0.390 3/1 1 73850 S 83 UC-K 1 GHS830164R017 0.390 3/1 1.6 738601 S 83 UC-K 1.6 GHS830164R057 0.390 3/1 738700 S 83 UC-K GHS830164R077 0.390 3/1 3 738809 S 83 UC-K 3 GHS830164R0317 0.390 3/1 4 738908 S 83 UC-K 4 GHS830164R0337 0.390 3/1 6 739004 S 83 UC-K 6 GHS830164R0377 0.390 3/1 8 739103 S 83 UC-K 8 GHS830164R0407 0.390 3/1 10 7390 S 83 UC-K 10 GHS830164R047 0.390 3/1 16 739301 S 83 UC-K 16 GHS830164R0467 0.390 3/1 0 739400 S 83 UC-K 0 GHS830164R0487 0.390 3/1 5 739509 S 83 UC-K 5 GHS830164R0517 0.390 3/1 3 739608 S 83 UC-K 3 GHS830164R0537 0.390 3/1 40 739707 S 83 UC-K 40 GHS830164R0557 0.390 3/1 50 739806 S 83 UC-K 50 GHS830164R0577 0.480 3/1 63 739905 S 83 UC-K 63 GHS830164R0607 0.480 3/1 /68 CDC00053D004 DIN-Rail components for rolling stock applications

40133 A EAN Type code Order code kg pc. CSC400479F001 4 0. 741601 S 84 UC-K 0. GHS840164R0087 0.50 0.3 741700 S 84 UC-K 0.3 GHS840164R0117 0.50 0.5 741809 S 84 UC-K 0.5 GHS840164R0157 0.50 0.75 741908 S 84 UC-K 0.75 GHS840164R0187 0.50 S 84 UC 1 74004 S 84 UC-K 1 GHS840164R017 0.50 1.6 74103 S 84 UC-K 1.6 GHS840164R057 0.50 740 S 84 UC-K GHS840164R077 0.50 3 74301 S 84 UC-K 3 GHS840164R0317 0.50 4 74400 S 84 UC-K 4 GHS840164R0337 0.50 6 74509 S 84 UC-K 6 GHS840164R0377 0.50 8 74608 S 84 UC-K 8 GHS840164R0407 0.50 10 74707 S 84 UC-K 10 GHS840164R047 0.50 16 74806 S 84 UC-K 16 GHS840164R0467 0.50 0 743001 S 84 UC-K 0 GHS840164R0487 0.50 5 743100 S 84 UC-K 5 GHS840164R0517 0.50 3 74309 S 84 UC-K 3 GHS840164R0537 0.50 40 743308 S 84 UC-K 40 GHS840164R0557 0.50 50 743407 S 84 UC-K 50 GHS840164R0577 0.640 63 743506 S 84 UC-K 63 GHS840164R0607 0.640 DIN-Rail components for rolling stock applications CDC00053D004 /69

MCBs S 80 series UC, Z characteristic universal range S 81 UC CSC400480F001 S 80 series UC, Z characteristic Function: protection and control of the electronic circuits against lower and long duration overloads and short-circuits; version dedicated to application in direct circuits for voltages up to 0 V DC 1 pole and 440 V DC, 3 and 4 poles. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I1-F1) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu =6 ka for 0, A 40 A I cu =4,5 ka for 50 A 63 A 40133 S 8 UC CSC400481F001 A EAN Type code Order code 1 0.5 638604 S 81 UC-Z 0.5 GHS810164R0158 0.130 10/40 1 638703 S 81 UC-Z 1 GHS810164R018 0.130 10/40 1.6 63880 S 81 UC-Z 1.6 GHS810164R058 0.130 10/40 638901 S 81 UC-Z GHS810164R078 0.130 10/40 3 639007 S 81 UC-Z 3 GHS810164R0318 0.130 10/40 4 639106 S 81 UC-Z 4 GHS810164R0338 0.130 10/40 6 63905 S 81 UC-Z 6 GHS810164R0378 0.130 10/40 8 639403 S 81 UC-Z 8 GHS810164R0408 0.130 10/40 10 63950 S 81 UC-Z 10 GHS810164R048 0.130 10/40 16 639601 S 81 UC-Z 16 GHS810164R0468 0.130 10/40 0 639700 S 81 UC-Z 0 GHS810164R0488 0.130 10/40 5 639809 S 81 UC-Z 5 GHS810164R0518 0.130 10/40 3 639908 S 81 UC-Z 3 GHS810164R0538 0.130 10/40 40 640003 S 81 UC-Z 40 GHS810164R0558 0.130 10/40 50 64010 S 81 UC-Z 50 GHS810164R0578 0.160 10/40 63 64001 S 81 UC-Z 63 GHS810164R0608 0.160 10/40 40133 A EAN Type code Order code 0.5 640300 S 8 UC-Z 0.5 GHS80164R0158 0.60 5/0 1 640409 S 8 UC-Z 1 GHS80164R018 0.60 5/0 1.6 64304 S 8 UC-Z 1.6 GHS80164R058 0.60 5/0 641000 S 8 UC-Z GHS80164R078 0.60 5/0 3 641109 S 8 UC-Z 3 GHS80164R0318 0.60 5/0 4 64108 S 8 UC-Z 4 GHS80164R0338 0.60 5/0 6 641307 S 8 UC-Z 6 GHS80164R0378 0.60 5/0 8 641406 S 8 UC-Z 8 GHS80164R0408 0.60 5/0 10 641505 S 8 UC-Z 10 GHS80164R048 0.60 5/0 16 641604 S 8 UC-Z 16 GHS80164R0468 0.60 5/0 0 641703 S 8 UC-Z 0 GHS80164R0488 0.60 5/0 5 64180 S 8 UC-Z 5 GHS80164R0518 0.60 5/0 3 641901 S 8 UC-Z 3 GHS80164R0538 0.60 5/0 40 64007 S 8 UC-Z 40 GHS80164R0558 0.60 5/0 50 64106 S 8 UC-Z 50 GHS80164R0578 0.30 5/0 63 6405 S 8 UC-Z 63 GHS80164R0608 0.30 5/0 /70 CDC00053D004 DIN-Rail components for rolling stock applications

40133 A EAN Type code Order code kg pc. CSC400478F001 3 0.5 740000 S 83 UC-Z 0.5 GHS830164R0158 0.390 3/1 1 740109 S 83 UC-Z 1 GHS830164R018 0.390 3/1 1.6 74008 S 83 UC-Z 1.6 GHS830164R058 0.390 3/1 740307 S 83 UC-Z GHS830164R078 0.390 3/1 S 83 UC 3 740406 S 83 UC-Z 3 GHS830164R0318 0.390 3/1 4 740505 S 83 UC-Z 4 GHS830164R0338 0.390 3/1 6 740604 S 83 UC-Z 6 GHS830164R0378 0.390 3/1 8 740703 S 83 UC-Z 8 GHS830164R0408 0.390 3/1 10 74080 S 83 UC-Z 10 GHS830164R048 0.390 3/1 16 740901 S 83 UC-Z 16 GHS830164R0468 0.390 3/1 0 741007 S 83 UC-Z 0 GHS830164R0488 0.390 3/1 5 741106 S 83 UC-Z 5 GHS830164R0518 0.390 3/1 CSC400479F001 3 74105 S 83 UC-Z 3 GHS830164R0538 0.390 3/1 40 741304 S 83 UC-Z 40 GHS830164R0558 0.390 3/1 50 741403 S 83 UC-Z 50 GHS830164R0578 0.480 3/1 63 74150 S 83 UC-Z 63 GHS830164R0608 0.480 3/1 S 84 UC 40133 A EAN Type code Order code 4 0.5 743605 S 84 UC-Z 0.5 GHS840164R0158 0.50 1 743704 S 84 UC-Z 1 GHS840164R018 0.50 1.6 743803 S 84 UC-Z 1.6 GHS840164R058 0.50 74390 S 84 UC-Z GHS840164R078 0.50 3 744008 S 84 UC-Z 3 GHS840164R0318 0.50 4 744107 S 84 UC-Z 4 GHS840164R0338 0.50 6 74406 S 84 UC-Z 6 GHS840164R0378 0.50 8 744305 S 84 UC-Z 8 GHS840164R0408 0.50 10 744404 S 84 UC-Z 10 GHS840164R048 0.50 16 744503 S 84 UC-Z 16 GHS840164R0468 0.50 0 74460 S 84 UC-Z 0 GHS840164R0488 0.50 5 744701 S 84 UC-Z 5 GHS840164R0518 0.50 3 744800 S 84 UC-Z 3 GHS840164R0538 0.50 40 744909 S 84 UC-Z 40 GHS840164R0558 0.50 50 745005 S 84 UC-Z 50 GHS840164R0578 0.640 63 745104 S 84 UC-Z 63 GHS840164R0608 0.640 DIN-Rail components for rolling stock applications CDC00053D004 /71

High Performance MCB S800S Incomparable performances to meet the demand in rolling stock equipment Interchangeable terminal, failsafe cage or ring lug terminal Quick identification of technical characteristics thanks to laser-printing of all data Easy product name, easy identification, easy life. Clear identification of the moving contact position thanks to toggle identification ONOFF and TRIP position Clear identification of the reason of cut-off thanks to TRIP position of the toggle Wide range of accessories to enlarge product functionality /7 CDC00053D004 DIN-Rail components for rolling stock applications

Housing materials In the S800 range of MCBs for traction, specific materials are used that are classified with an hazard level R6/HL3 according to EN 45545-. Plastic materials are also classified I-F3 according the NF F 16-101/10 ( Railway Rolling Stock Fire Behavior- Choice of Materials and Railway Rolling Stock Fire Behavior- Choice of Materials, Application to Electrical Equipment ) thus responding to exigency 3. Shock and vibration resistance Additionally to the high quality standards and the fl ammability requirements, rail applications have specifi c demands that have to be to fulfi lled like resistance to shocks and vibrations. The resistance to vibrations and shocks of S800 has been positively tested according to: IEC 61373 010 05 Edition.0 Rolling stock equipment Shock and vibration tests considering Category 1, Class A and Class B. Play it safe: display the operational state The mechanical drive of the S800 high performance MCB is equipped with a trip-free release. The trip position display thereby always reliably displays the exact position of the moving contact. The trip position provides additional trip detection allowing to easily identify the reason for the cut-off. The switch lever moves to the middle position in case of thermal or magnetic tripping. Cage and ring terminals The S800 standard equipment with interchangeable terminal adapter for wires, cables and rigid conductors guarantees a high level of flexibility and comfort. Fast and safe connection of the conductors is ensured by the onboard terminal shutter integrated into the body of the terminal, thereby preventing incorrect underclamping of the connections. Reliable: the disconnector properties In OFF position (0 position), the S800 high performance MCB guarantees safe electrical isolation of the circuit compliant to IEC 60947-. Wide range of accessories S800 MCB range is completed with a wide range of accessories that enlarge the functions of the MCB not only as a protection devices, but even for control and monitor remotely the installation. The range of accessories include auxiliary contacts, aux/signal contacts, remote switching, short circuit limiter, shunt operation releases, undervoltage releases and busbars. DIN-Rail components for rolling stock applications CDC00053D004 /73

MCBs S800S series technical features S800 CCC413001F000 S800S Standards Product Standard IEC/EN 60898-1, IEC/EN 60947- Hazard level acc. to EN 45545- R6/HL3 Classification according to NF F 16-101/10 I3 / F (Exigence ) Resistance to shocks and vibrations acc. Category 1 - Class B - Body mounted to IEC 61373 GOST 919-88 approval Yes General Poles 1P, P, 3P, 4P data Tripping characteristics B, C, K A 6 15 A frequency f Hz 50/60 Hz insulation voltage Ui acc. to IEC/EN 60664-1 V 690 V AC impulse withstand voltage Uimp. (1./50μs) kv 8 kv Overvoltage category IV Pollution degree 3 Suitability for isolation yes Data operational voltage U n V 30/400 V AC acc. to Max. power frequency recovery voltage (U max ) V IEC/EN Min. operating voltage V 1 V AC 60898-1 short-circuit capacity I cn ka 5 ka (10 80 A) Energy limiting class (B, C up to 40 A) Dielectric test voltage kv Reference temperature for tripping C B, C: 30 C characteristics Electrical and mechanical endurance ops. 10 3 A: 10,000 electrical / mechanical; 40 100 A: 6,000 electrical / 4,000 mechanical; 15 A: 4,000 electrical /6,000 mechanical Service short-circuit capacity I cs ka 1.5 (10 80 A) Data acc. to operational voltage U e V 400/690 V AC 1P: 15 V DC; P: 50 V DC; 3P: 375 V DC; 4P: 500 V DC IEC/EN Max. power frequency recovery voltage (U max ) V - 60947- Min. operating voltage V 1 V AC ultimate short-circuit breaking capacity I cu ka AC: 40/415 V = 50 ka; 54/440 V = 30 ka; 400/690 V (up to 80 A) = 6 ka; 400/690 V (100 15 A) = 4.5 ka DC: 15 V (1P) = 30 ka; 50 V (P) = 30 ka; 375 V (3P) = 30 ka; 500 V (4P) = 30 ka service short-circuit breaking capacity I cs ka AC: 40/415 V = 40 ka; 54/440 V (up to 80 A) =.5 ka; 54/440 V (100 15 A) = 15 ka; 400/690 V (up to 80 A) = 4kA; 400/690 V (100 15 A) = 3 ka DC: 15 V (1P) = 30 ka; 50 V (P) = 30 ka; 375 V (3P) = 30 ka; 500 V (4P) = 30 ka impulse withstand voltage U imp. (1./50μs) kv 8 kv Dielectric test voltage kv acc. to standard Reference temperature for tripping characteristics C B, C: 30 C; K: 40 C Electrical and mechanical endurance ops. 6 3 A: 10,000 electrical / mechanical; 40 100 A: 6,000 electrical / 4,000 mechanical; 15 A: 4,000 electrical / 6,000 mechanical /74 CDC00053D004 DIN-Rail components for rolling stock applications

Mechanical data S800S Housing Material group I, RAL 7035 Toggle black, lockable Contact position indicator - Protection degree acc. to EN 6059 IP0; IP40 (actuating end only) Mechanical endurance cycles 10000 ops. Shock resistance acc. to IEC/EN 60068--7 5 g / 30ms acc. to IEC 60068-7 Test Ea Vibration resistance acc. to IEC/EN 60068--6 IEC 60068--6 Test Fc; - 13. Hz / 1 mm 13. - 100 Hz / 0.7 g with load 100% x I e Environmental conditions (damp heat) acc. C/RH 1 + 1 cycle with 55 C / 90-96% and 5% / 95-100% to IEC/EN 60068--30 Environmental conditions (dry heat ) acc. C/RH 16 hours 55 C / hours 70 C with damp heat 55% to IEC/EN 60068- - Test B Ambient temperature (with daily average +35 C) C -5 + 60 Storage temperature C -40 +70 Installation Terminal type Failsafe cage or ring terminal connection Cross-section of conductors (top/bottom) stranded mm 1 50 mm² flexible mm 1 70 mm² Tightening torque Nm 3.5 Nm in-lbs. 31 in-lbs. Screwdriver POZI Mounting EN 60715 Mounting position any Supply any Dimensions Mounting dimensions acc. to DIN 43880 Pole dimensions (H x D x W) mm 8.5 x 95 x 6.5 mm and weight Pole weight g approx. 40 g Combination with auxiliary elements See table page 4/ DIN-Rail components for rolling stock applications CDC00053D004 /75

High performance MCBs S800 S series 50000 with cage terminal, B characteristic S801S CCC413001F000 S800S, B characteristic Function: protection and control of the circuits against overloads and short-circuits when a high breaking capacity is required; protection for people and big length cables in TN and IT systems; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream. Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cn =5 ka (10...80A) I cu =50 ka 76171 S80S CCC413001F000 A EAN Type code Order code 1 6 408107 S801S-B6 CCS861001R0065 0.45 1 8 41139 S801S-B8 CCS861001R0085 0.45 1 10 00008 S801S-B10 CCS861001R0105 0.45 1 13 00015 S801S-B13 CCS861001R0135 0.45 1 16 000 S801S-B16 CCS861001R0165 0.45 1 0 00039 S801S-B0 CCS861001R005 0.45 1 5 00046 S801S-B5 CCS861001R055 0.45 1 3 00053 S801S-B3 CCS861001R035 0.45 1 40 00060 S801S-B40 CCS861001R0405 0.45 1 50 00077 S801S-B50 CCS861001R0505 0.45 1 63 00084 S801S-B63 CCS861001R0635 0.45 1 80 00091 S801S-B80 CCS861001R0805 0.45 1 100 00107 S801S-B100 CCS861001R085 0.45 1 15 00114 S801S-B15 CCS861001R0845 0.45 1 76171 A EAN Type code Order code 6 408114 S80S-B6 CCS86001R0065 0.49 1 8 411336 S80S-B8 CCS86001R0085 0.49 1 10 0011 S80S-B10 CCS86001R0105 0.49 1 13 00138 S80S-B13 CCS86001R0135 0.49 1 16 00145 S80S-B16 CCS86001R0165 0.49 1 0 0015 S80S-B0 CCS86001R005 0.49 1 5 00169 S80S-B5 CCS86001R055 0.49 1 3 00176 S80S-B3 CCS86001R035 0.49 1 40 00183 S80S-B40 CCS86001R0405 0.49 1 50 00190 S80S-B50 CCS86001R0505 0.49 1 63 0006 S80S-B63 CCS86001R0635 0.49 1 80 0013 S80S-B80 CCS86001R0805 0.49 1 100 000 S80S-B100 CCS86001R085 0.49 1 15 0037 S80S-B15 CCS86001R0845 0.49 1 /76 CDC00053D004 DIN-Rail components for rolling stock applications

76171 CCC413001F000 A EAN Type code Order code 3 6 40811 S803S-B6 CCS863001R0065 0.735 1 8 411343 S803S-B8 CCS863001R0085 0.735 1 10 0044 S803S-B10 CCS863001R0105 0.735 1 S803S 13 0051 S803S-B13 CCS863001R0135 0.735 1 16 0068 S803S-B16 CCS863001R0165 0.735 1 0 0075 S803S-B0 CCS863001R005 0.735 1 5 008 S803S-B5 CCS863001R055 0.735 1 3 0099 S803S-B3 CCS863001R035 0.735 1 40 00305 S803S-B40 CCS863001R0405 0.735 1 50 0031 S803S-B50 CCS863001R0505 0.735 1 63 0039 S803S-B63 CCS863001R0635 0.735 1 80 00336 S803S-B80 CCS863001R0805 0.735 1 CCC413001F000 100 00343 S803S-B100 CCS863001R085 0.735 1 15 00350 S803S-B15 CCS863001R0845 0.735 1 S804S 76171 A EAN Type code Order code 4 6 408138 S804S-B6 CCS864001R0065 0.98 1 8 411350 S804S-B8 CCS864001R0085 0.98 1 10 00367 S804S-B10 CCS864001R0105 0.98 1 13 00374 S804S-B13 CCS864001R0135 0.98 1 16 00381 S804S-B16 CCS864001R0165 0.98 1 0 00398 S804S-B0 CCS864001R005 0.98 1 5 00404 S804S-B5 CCS864001R055 0.98 1 3 00411 S804S-B3 CCS864001R035 0.98 1 40 0048 S804S-B40 CCS864001R0405 0.98 1 50 00435 S804S-B50 CCS864001R0505 0.98 1 63 0044 S804S-B63 CCS864001R0635 0.98 1 80 00459 S804S-B80 CCS864001R0805 0.98 1 100 00466 S804S-B100 CCS864001R085 0.98 1 15 00473 S804S-B15 CCS864001R0845 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /77

High performance MCBs S800S series 50000 with ring terminal connection, B characteristic S801S CCC413001F000 S800S, B characteristic Function: protection and control of the circuits against overloads and short-circuits when a high breaking capacity is required; protection for people and big length cables in TN and IT systems; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream. Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cn =5 ka (10...80A) I cu =50 ka 76171 S80S CCC413001F000 A EAN Type code Order code 1 6 40868 S801S-B6-R CCS86100R0065 0.45 1 8 411480 S801S-B8-R CCS86100R0085 0.45 1 10 09636 S801S-B10-R CCS86100R0105 0.45 1 13 09643 S801S-B13-R CCS86100R0135 0.45 1 16 09650 S801S-B16-R CCS86100R0165 0.45 1 0 09667 S801S-B0-R CCS86100R005 0.45 1 5 09674 S801S-B5-R CCS86100R055 0.45 1 3 09681 S801S-B3-R CCS86100R035 0.45 1 40 0686 S801S-B40-R CCS86100R0405 0.45 1 50 06833 S801S-B50-R CCS86100R0505 0.45 1 63 06840 S801S-B63-R CCS86100R0635 0.45 1 80 06857 S801S-B80-R CCS86100R0805 0.45 1 100 06864 S801S-B100-R CCS86100R085 0.45 1 15 06871 S801S-B15-R CCS86100R0845 0.45 1 76171 A EAN Type code Order code 6 40875 S80S-B6-R CCS8600R0065 0.49 1 8 411497 S80S-B8-R CCS8600R0085 0.49 1 10 09698 S80S-B10-R CCS8600R0105 0.49 1 13 09704 S80S-B13-R CCS8600R0135 0.49 1 16 09711 S80S-B16-R CCS8600R0165 0.49 1 0 0978 S80S-B0-R CCS8600R005 0.49 1 5 09735 S80S-B5-R CCS8600R055 0.49 1 3 0974 S80S-B3-R CCS8600R035 0.49 1 40 06888 S80S-B40-R CCS8600R0405 0.49 1 50 06895 S80S-B50-R CCS8600R0505 0.49 1 63 06901 S80S-B63-R CCS8600R0635 0.49 1 80 06918 S80S-B80-R CCS8600R0805 0.49 1 100 0695 S80S-B100-R CCS8600R085 0.49 1 15 0693 S80S-B15-R CCS8600R0845 0.49 1 /78 CDC00053D004 DIN-Rail components for rolling stock applications

76171 A EAN Type code Order code kg pc. S803S CCC413001F000 3 6 4088 S803S-B6-R CCS86300R0065 0.735 1 8 411503 S803S-B8-R CCS86300R0085 0.735 1 10 09759 S803S-B10-R CCS86300R0105 0.735 1 13 09766 S803S-B13-R CCS86300R0135 0.735 1 16 09773 S803S-B16-R CCS86300R0165 0.735 1 0 09780 S803S-B0-R CCS86300R005 0.735 1 5 09797 S803S-B5-R CCS86300R055 0.735 1 3 09803 S803S-B3-R CCS86300R035 0.735 1 40 06949 S803S-B40-R CCS86300R0405 0.735 1 50 06956 S803S-B50-R CCS86300R0505 0.735 1 63 06963 S803S-B63-R CCS86300R0635 0.735 1 80 06970 S803S-B80-R CCS86300R0805 0.735 1 100 06987 S803S-B100-R CCS86300R085 0.735 1 15 06994 S803S-B15-R CCS86300R0845 0.735 1 CCC413001F000 76171 S804S A EAN Type code Order code kg pc. 4 6 40899 S804S-B6-R CCS86400R0065 0.98 1 8 411510 S804S-B8-R CCS86400R0085 0.98 1 10 09810 S804S-B10-R CCS86400R0105 0.98 1 13 0987 S804S-B13-R CCS86400R0135 0.98 1 16 09834 S804S-B16-R CCS86400R0165 0.98 1 0 09841 S804S-B0-R CCS86400R005 0.98 1 5 09858 S804S-B5-R CCS86400R055 0.98 1 3 09865 S804S-B3-R CCS86400R035 0.98 1 40 07007 S804S-B40-R CCS86400R0405 0.98 1 50 07014 S804S-B50-R CCS86400R0505 0.98 1 63 0701 S804S-B63-R CCS86400R0635 0.98 1 80 07038 S804S-B80-R CCS86400R0805 0.98 1 100 07045 S804S-B100-R CCS86400R085 0.98 1 15 0705 S804S-B15-R CCS86400R0845 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /79

High performance MCBs S800S series 50000 with cage terminal, C characteristic S801S CCC413001F000 S800S, C characteristic Function: protection and control of the circuits against overloads and short-circuits when a high breaking capacity is required; protection for resistive and inductive loads with low inrush ; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream. Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cn =5 ka (10...80A) I cu =50 ka S80S CCC413001F000 76171 A EAN Type code Order code 1 6 408145 S801S-C6 CCS861001R0064 0.45 1 8 411367 S801S-C8 CCS861001R0084 0.45 1 10 00480 S801S-C10 CCS861001R0104 0.45 1 13 00497 S801S-C13 CCS861001R0134 0.45 1 16 00503 S801S-C16 CCS861001R0164 0.45 1 0 00510 S801S-C0 CCS861001R004 0.45 1 5 0057 S801S-C5 CCS861001R054 0.45 1 3 00534 S801S-C3 CCS861001R034 0.45 1 40 00541 S801S-C40 CCS861001R0404 0.45 1 50 00558 S801S-C50 CCS861001R0504 0.45 1 63 00565 S801S-C63 CCS861001R0634 0.45 1 80 0057 S801S-C80 CCS861001R0804 0.45 1 100 00589 S801S-C100 CCS861001R084 0.45 1 15 00596 S801S-C15 CCS861001R0844 0.45 1 76171 A EAN Type code Order code 6 40815 S80S-C6 CCS86001R0064 0.49 1 8 411374 S80S-C8 CCS86001R0084 0.49 1 10 0060 S80S-C10 CCS86001R0104 0.49 1 13 00619 S80S-C13 CCS86001R0134 0.49 1 16 0066 S80S-C16 CCS86001R0164 0.49 1 0 00633 S80S-C0 CCS86001R004 0.49 1 5 00640 S80S-C5 CCS86001R054 0.49 1 3 00657 S80S-C3 CCS86001R034 0.49 1 40 00664 S80S-C40 CCS86001R0404 0.49 1 50 00671 S80S-C50 CCS86001R0504 0.49 1 63 00688 S80S-C63 CCS86001R0634 0.49 1 80 00695 S80S-C80 CCS86001R0804 0.49 1 100 00701 S80S-C100 CCS86001R084 0.49 1 15 00718 S80S-C15 CCS86001R0844 0.49 1 /80 CDC00053D004 DIN-Rail components for rolling stock applications

76171 CCC413001F000 A EAN Type code Order code 3 6 408169 S803S-C6 CCS863001R0064 0.735 1 8 411381 S803S-C8 CCS863001R0084 0.735 1 10 0075 S803S-C10 CCS863001R0104 0.735 1 S803S 13 0073 S803S-C13 CCS863001R0134 0.735 1 16 00749 S803S-C16 CCS863001R0164 0.735 1 0 00756 S803S-C0 CCS863001R004 0.735 1 5 00763 S803S-C5 CCS863001R054 0.735 1 3 00770 S803S-C3 CCS863001R034 0.735 1 40 00787 S803S-C40 CCS863001R0404 0.735 1 50 00794 S803S-C50 CCS863001R0504 0.735 1 63 00800 S803S-C63 CCS863001R0634 0.735 1 CCC413001F000 80 00817 S803S-C80 CCS863001R0804 0.735 1 100 0084 S803S-C100 CCS863001R084 0.735 1 15 00831 S803S-C15 CCS863001R0844 0.735 1 S804S 76171 A EAN Type code Order code 4 6 408176 S804S-C6 CCS864001R0064 0.98 1 8 411398 S804S-C8 CCS864001R0084 0.98 1 10 00848 S804S-C10 CCS864001R0104 0.98 1 13 00855 S804S-C13 CCS864001R0134 0.98 1 16 0086 S804S-C16 CCS864001R0164 0.98 1 0 00879 S804S-C0 CCS864001R004 0.98 1 5 00886 S804S-C5 CCS864001R054 0.98 1 3 00893 S804S-C3 CCS864001R034 0.98 1 40 00909 S804S-C40 CCS864001R0404 0.98 1 50 00916 S804S-C50 CCS864001R0504 0.98 1 63 0093 S804S-C63 CCS864001R0634 0.98 1 80 00930 S804S-C80 CCS864001R0804 0.98 1 100 00947 S804S-C100 CCS864001R084 0.98 1 15 00954 S804S-C15 CCS864001R0844 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /81

High performance MCBs S800S series 50000 with ring terminal connection, C characteristic S801S CCC413001F000 S800S, C characteristic Function: protection and control of the circuits against overloads and short-circuits when a high breaking capacity is required; protection for resistive and inductive loads with low inrush ; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream. Standards: IEC/EN 60898-1, IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cn =5 ka (10...80A) I cu =50 ka 76171 S80S CCC413001F000 A EAN Type code Order code 1 6 408305 S801S-C6-R CCS86100R0064 0.45 1 8 41157 S801S-C8-R CCS86100R0084 0.45 1 10 0987 S801S-C10-R CCS86100R0104 0.45 1 13 09889 S801S-C13-R CCS86100R0134 0.45 1 16 09896 S801S-C16-R CCS86100R0164 0.45 1 0 0990 S801S-C0-R CCS86100R004 0.45 1 5 09919 S801S-C5-R CCS86100R054 0.45 1 3 0996 S801S-C3-R CCS86100R034 0.45 1 40 07069 S801S-C40-R CCS86100R0404 0.45 1 50 07076 S801S-C50-R CCS86100R0504 0.45 1 63 07083 S801S-C63-R CCS86100R0634 0.45 1 80 07090 S801S-C80-R CCS86100R0804 0.45 1 100 07106 S801S-C100-R CCS86100R084 0.45 1 15 07113 S801S-C15-R CCS86100R0844 0.45 1 76171 A EAN Type code Order code 6 40831 S80S-C6-R CCS8600R0064 0.49 1 8 411534 S80S-C8-R CCS86001R0084 0.49 1 10 09933 S80S-C10-R CCS8600R0104 0.49 1 13 09940 S80S-C13-R CCS8600R0134 0.49 1 16 09957 S80S-C16-R CCS8600R0164 0.49 1 0 09964 S80S-C0-R CCS8600R004 0.49 1 5 09971 S80S-C5-R CCS8600R054 0.49 1 3 09988 S80S-C3-R CCS8600R034 0.49 1 40 0710 S80S-C40-R CCS8600R0404 0.49 1 50 07137 S80S-C50-R CCS8600R0504 0.49 1 63 07144 S80S-C63-R CCS8600R0634 0.49 1 80 07151 S80S-C80-R CCS8600R0804 0.49 1 100 07168 S80S-C100-R CCS8600R084 0.49 1 15 07175 S80S-C15-R CCS8600R0844 0.49 1 /8 CDC00053D004 DIN-Rail components for rolling stock applications

76171 CCC413001F000 A EAN Type code Order code 3 6 40839 S803S-C6-R CCS86300R0064 0.735 1 8 411541 S803S-C8-R CCS86300R0084 0.735 1 10 09995 S803S-C10-R CCS86300R0104 0.735 1 13 10007 S803S-C13-R CCS86300R0134 0.735 1 S803S 16 10014 S803S-C16-R CCS86300R0164 0.735 1 0 1001 S803S-C0-R CCS86300R004 0.735 1 5 10038 S803S-C5-R CCS86300R054 0.735 1 3 10045 S803S-C3-R CCS86300R034 0.735 1 40 0718 S803S-C40-R CCS86300R0404 0.735 1 50 07199 S803S-C50-R CCS86300R0504 0.735 1 63 0705 S803S-C63-R CCS86300R0634 0.735 1 80 071 S803S-C80-R CCS86300R0804 0.735 1 CCC413001F000 100 079 S803S-C100-R CCS86300R084 0.735 1 15 0736 S803S-C15-R CCS86300R0844 0.735 1 S804S A 76171 EAN Type code Order code kg pc. 4 6 408336 S804S-C6-R CCS86400R0064 0.98 1 8 411558 S804S-C8-R CCS86400R0084 0.98 1 10 1005 S804S-C10-R CCS86400R0104 0.98 1 13 10069 S804S-C13-R CCS86400R0134 0.98 1 16 10076 S804S-C16-R CCS86400R0164 0.98 1 0 10083 S804S-C0-R CCS86400R004 0.98 1 5 10090 S804S-C5-R CCS86400R054 0.98 1 3 10106 S804S-C3-R CCS86400R034 0.98 1 40 0743 S804S-C40-R CCS86400R0404 0.98 1 50 0750 S804S-C50-R CCS86400R0504 0.98 1 63 0767 S804S-C63-R CCS86400R0634 0.98 1 80 0774 S804S-C80-R CCS86400R0804 0.98 1 100 0781 S804S-C100-R CCS86400R084 0.98 1 15 0798 S804S-C15-R CCS86400R0844 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /83

High performance MCBs S800S series 50000 with cage terminal, K characteristic S801S CCC413001F000 S800S, K characteristic Function: protection and control of the circuits like motors, transformer and auxiliary circuits, against overloads and short-circuits when a high breaking capacity is required; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream, Advantages: no nuisance tripping in the case of functional peak s up to 10xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines, Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cu =50 ka S80S CCC413001F000 76171 A EAN Type code Order code 1 6 4080 S801S-K6 CCS861001R0067 0.45 1 8 41144 S801S-K8 CCS861001R0407 0.45 1 10 01449 S801S-K10 CCS861001R047 0.45 1 13 01456 S801S-K13 CCS861001R0447 0.45 1 16 01463 S801S-K16 CCS861001R0467 0.45 1 0 01470 S801S-K0 CCS861001R0487 0.45 1 5 01487 S801S-K5 CCS861001R0517 0.45 1 3 01494 S801S-K3 CCS861001R0537 0.45 1 40 01500 S801S-K40 CCS861001R0557 0.45 1 50 01517 S801S-K50 CCS861001R0577 0.45 1 63 0154 S801S-K63 CCS861001R0597 0.45 1 80 01531 S801S-K80 CCS861001R067 0.45 1 100 01548 S801S-K100 CCS861001R0637 0.45 1 15 01555 S801S-K15 CCS861001R0647 0.45 1 76171 A EAN Type code Order code 6 40837 S80S-K6 CCS86001R0067 0.49 1 8 411459 S80S-K8 CCS86001R0407 0.49 1 10 0156 S80S-K10 CCS86001R047 0.49 1 13 01579 S80S-K13 CCS86001R0447 0.49 1 16 01586 S80S-K16 CCS86001R0467 0.49 1 0 01593 S80S-K0 CCS86001R0487 0.49 1 5 01609 S80S-K5 CCS86001R0517 0.49 1 3 01616 S80S-K3 CCS86001R0537 0.49 1 40 0163 S80S-K40 CCS86001R0557 0.49 1 50 01630 S80S-K50 CCS86001R0577 0.49 1 63 01647 S80S-K63 CCS86001R0597 0.49 1 80 01654 S80S-K80 CCS86001R067 0.49 1 100 01661 S80S-K100 CCS86001R0637 0.49 1 15 01678 S80S-K15 CCS86001R0647 0.49 1 /84 CDC00053D004 DIN-Rail components for rolling stock applications

76171 CCC413001F000 A EAN Type code Order code 3 6 40844 S803S-K6 CCS863001R0067 0.735 1 8 411466 S803S-K8 CCS863001R0407 0.735 1 10 01685 S803S-K10 CCS863001R047 0.735 1 S803S 13 0169 S803S-K13 CCS863001R0447 0.735 1 16 01708 S803S-K16 CCS863001R0467 0.735 1 0 01715 S803S-K0 CCS863001R0487 0.735 1 5 017 S803S-K5 CCS863001R0517 0.735 1 3 01739 S803S-K3 CCS863001R0537 0.735 1 40 01746 S803S-K40 CCS863001R0557 0.735 1 50 01753 S803S-K50 CCS863001R0577 0.735 1 63 01760 S803S-K63 CCS863001R0597 0.735 1 80 01777 S803S-K80 CCS863001R067 0.735 1 CCC413001F000 100 01784 S803S-K100 CCS863001R0637 0.735 1 15 01791 S803S-K15 CCS863001R0647 0.735 1 S804S 76171 A EAN Type code Order code kg pc, 4 6 40851 S804S-K6 CCS864001R0067 0.98 1 8 411473 S804S-K8 CCS864001R0407 0.98 1 10 01807 S804S-K10 CCS864001R047 0.98 1 13 01814 S804S-K13 CCS864001R0447 0.98 1 16 0181 S804S-K16 CCS864001R0467 0.98 1 0 01838 S804S-K0 CCS864001R0487 0.98 1 5 01845 S804S-K5 CCS864001R0517 0.98 1 3 0185 S804S-K3 CCS864001R0537 0.98 1 40 01869 S804S-K40 CCS864001R0557 0.98 1 50 01876 S804S-K50 CCS864001R0577 0.98 1 63 01883 S804S-K63 CCS864001R0597 0.98 1 80 01890 S804S-K80 CCS864001R067 0.98 1 100 01906 S804S-K100 CCS864001R0637 0.98 1 15 01913 S804S-K15 CCS864001R0647 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /85

High performance MCBs S800S series 50000 with ring terminal connection, K characteristic S801S CCC413001F000 S800S, K characteristic Function: protection and control of the circuits like motors, transformer and auxiliary circuits, against overloads and short-circuits when a high breaking capacity is required; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream. Advantages: no nuisance tripping in the case of functional peak s up to 10xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cu =50 ka 76171 S80S CCC413001F000 A EAN Type code Order code 1 6 408381 S801S-K6-R CCS86100R0067 0.45 1 8 41160 S801S-K8-R CCS86100R0407 0.45 1 10 09391 S801S-K10-R CCS86100R047 0.45 1 13 09407 S801S-K13-R CCS86100R0447 0.45 1 16 09414 S801S-K16-R CCS86100R0467 0.45 1 0 0941 S801S-K0-R CCS86100R0487 0.45 1 5 09438 S801S-K5-R CCS86100R0517 0.45 1 3 09445 S801S-K3-R CCS86100R0537 0.45 1 40 07540 S801S-K40-R CCS86100R0557 0.45 1 50 07557 S801S-K50-R CCS86100R0577 0.45 1 63 07564 S801S-K63-R CCS86100R0597 0.45 1 80 07571 S801S-K80-R CCS86100R067 0.45 1 100 07588 S801S-K100-R CCS86100R0637 0.45 1 15 07595 S801S-K15-R CCS86100R0647 0.45 1 76171 A EAN Type code Order code 6 408398 S80S-K6-R CCS8600R0067 0.49 1 8 411619 S80S-K8-R CCS8600R0407 0.49 1 10 0945 S80S-K10-R CCS8600R047 0.49 1 13 09469 S80S-K13-R CCS8600R0447 0.49 1 16 09476 S80S-K16-R CCS8600R0467 0.49 1 0 09483 S80S-K0-R CCS8600R0487 0.49 1 5 09490 S80S-K5-R CCS8600R0517 0.49 1 3 09506 S80S-K3-R CCS8600R0537 0.49 1 40 07601 S80S-K40-R CCS8600R0557 0.49 1 50 07618 S80S-K50-R CCS8600R0577 0.49 1 63 0765 S80S-K63-R CCS8600R0597 0.49 1 80 0763 S80S-K80-R CCS8600R067 0.49 1 100 07649 S80S-K100-R CCS8600R0637 0.49 1 15 07656 S80S-K15-R CCS8600R0647 0.49 1 /86 CDC00053D004 DIN-Rail components for rolling stock applications

76171 A EAN Type code Order code kg pc. CCC413001F000 3 6 408404 S803S-K6-R CCS86300R0067 0.735 1 8 41166 S803S-K8-R CCS86300R0407 0.735 1 10 09513 S803S-K10-R CCS86300R047 0.735 1 13 0950 S803S-K13-R CCS86300R0447 0.735 1 S803S 16 09537 S803S-K16-R CCS86300R0467 0.735 1 0 09544 S803S-K0-R CCS86300R0487 0.735 1 5 09551 S803S-K5-R CCS86300R0517 0.735 1 3 09568 S803S-K3-R CCS86300R0537 0.735 1 40 07663 S803S-K40-R CCS86300R0557 0.735 1 50 07670 S803S-K50-R CCS86300R0577 0.735 1 63 07687 S803S-K63-R CCS86300R0597 0.735 1 80 07694 S803S-K80-R CCS86300R067 0.735 1 100 07700 S803S-K100-R CCS86300R0637 0.735 1 S804S CCC413001F000 15 07717 S803S-K15-R CCS86300R0647 0.735 1 A 76171 EAN Type code Order code kg pc. 4 6 408411 S804S-K6-R CCS86400R0067 0.98 1 8 411633 S804S-K8-R CCS86400R0407 0.98 1 10 09575 S804S-K10-R CCS86400R047 0.98 1 13 0958 S804S-K13-R CCS86400R0447 0.98 1 16 09599 S804S-K16-R CCS86400R0467 0.98 1 0 09605 S804S-K0-R CCS86400R0487 0.98 1 5 0961 S804S-K5-R CCS86400R0517 0.98 1 3 0969 S804S-K3-R CCS86400R0537 0.98 1 40 0774 S804S-K40-R CCS86400R0557 0.98 1 50 07731 S804S-K50-R CCS86400R0577 0.98 1 63 07748 S804S-K63-R CCS86400R0597 0.98 1 80 07755 S804S-K80-R CCS86400R067 0.98 1 100 0776 S804S-K100-R CCS86400R0637 0.98 1 15 07779 S804S-K15-R CCS86400R0647 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /87

MCBs S800S UC series technical features S801S CCC413001F000 S800S UC Standards Product Standard IEC / EN 60947- Hazard level acc. to EN 45545- R6/HL3 Classifi cation according to NF F 16-101/10 I3 / F (Exigence ) Resistance to shocks and vibrations Category 1 - Class B - Body mounted acc. to IEC 61373 GOST 919-88 approval Yes General data Poles 1P, P, 3P, 4P Tripping characteristics UCB, UCK A 10 15 A frequency f Hz DC insulation voltage U i acc. to IEC/EN 60664-1 V 750 V DC impulse withstand voltage U imp. (1./50μs) kv 8 kv Overvoltage category IV Pollution degree 1P, P: 3; 3P, 4P: Suitability for isolation yes Data operational voltage U e V 1P: 50 V DC; P: 500 V DC; 3P, 4P: 750 V DC acc. to Max. power frequency recovery voltage (U max ) V - IEC/EN Min. operating voltage V - 60947- ultimate short-circuit breaking capacity I cu ka DC: 50 V (1P) = 50 ka; 500 V (P) = 50 ka; 750 V (3P, 4P) = 50 ka service short-circuit breaking capacity I cs ka DC: 50 V (1P) = 50 ka; 500 V (P) = 50 ka; 750 V (3P, 4P) = 50 ka impulse withstand voltage U imp. (1./50 μs) kv 8 kv Dielectric test voltage kv acc. to standard Reference temperature for tripping C UCB: 30 C; UCK: 40 C characteristics Electrical and mechanical endurance ops. 10 100 A: 1500 electric; 8500 mechanic; 15 A: 1000 electric, 7000 mechanic /88 CDC00053D004 DIN-Rail components for rolling stock applications

Mechanical data S800S UC Housing Material group I, RAL 7035 Toggle black, lockable Contact position indicator - Protection degree acc. to EN 6059 IP0; IP40 (actuating end only) Mechanical endurance cycles 10000 ops. Shock resistance acc. to IEC/EN 60068--7 5g / 30ms acc. to IEC 60068-7 Test Ea Vibration resistance acc. to IEC/EN 60068--6 IEC 60068--6 Test Fc; - 13. Hz / 1 mm 13. - 100 Hz / 0.7g with load 100% x I e Environmental conditions (damp heat) acc. to IEC/EN 60068--30 C/RH 1 + 1 cycle with 55 C / 90-96% and 5% / 95-100% Environmental conditions (dry heat ) C/RH 16 hours 55 C / hours 70 C with damp heat 55% acc. to IEC/EN 60068- - Test B Ambient temperature (with daily average +35 C) C -5 + 60 C Storage temperature C -40 +70 C Installation Terminal type Failsafe cage or ring terminal connection Cross-section of conductors (top/bottom) stranded mm 1 50 mm² flexible mm 1 70 mm² AWG - Cross-section of busbars mm - AWG - Tightening torque Nm 3.5 Nm in-lbs. 31 in-lbs. Screwdriver POZI Mounting EN 60715 Mounting position any Supply any Dimensions Mounting dimensions acc. to DIN 43880 - and weight Pole dimensions (H x D x W) mm 8.5 x 95 x 6.5 mm Pole weight g approx. 40 g Combination with auxiliary elements See table page 4/16 DIN-Rail components for rolling stock applications CDC00053D004 /89

High performance MCBs S800S series 50000 DC range with cage terminal, UC, B characteristic S801S CCC413001F000 S800S, UC, B characteristic Function: protection and control of the circuits against overloads and short-circuits when a high breaking capacity is required; protection for people and big length cables in TN and IT systems; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream; version dedicated to application in direct circuits. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cu =50 ka 76171 S80S CCC413001F000 A EAN Type code Order code 1 10 084 S801S-UCB10 CCS861001R1105 0.45 1 13 0859 S801S-UCB13 CCS861001R1135 0.45 1 16 0866 S801S-UCB16 CCS861001R1165 0.45 1 0 0873 S801S-UCB0 CCS861001R105 0.45 1 5 0880 S801S-UCB5 CCS861001R155 0.45 1 3 0897 S801S-UCB3 CCS861001R135 0.45 1 40 0903 S801S-UCB40 CCS861001R1405 0.45 1 50 0910 S801S-UCB50 CCS861001R1505 0.45 1 63 097 S801S-UCB63 CCS861001R1635 0.45 1 80 0934 S801S-UCB80 CCS861001R1805 0.45 1 100 0941 S801S-UCB100 CCS861001R185 0.45 1 15 0958 S801S-UCB15 CCS861001R1845 0.45 1 76171 A EAN Type code Order code 10 0965 S80S-UCB10 CCS86001R1105 0.49 1 13 097 S80S-UCB13 CCS86001R1135 0.49 1 16 0989 S80S-UCB16 CCS86001R1165 0.49 1 0 0996 S80S-UCB0 CCS86001R105 0.49 1 5 03009 S80S-UCB5 CCS86001R155 0.49 1 3 03016 S80S-UCB3 CCS86001R135 0.49 1 40 0303 S80S-UCB40 CCS86001R1405 0.49 1 50 03030 S80S-UCB50 CCS86001R1505 0.49 1 63 03047 S80S-UCB63 CCS86001R1635 0.49 1 80 03054 S80S-UCB80 CCS86001R1805 0.49 1 100 03061 S80S-UCB100 CCS86001R185 0.49 1 15 03078 S80S-UCB15 CCS86001R1845 0.49 1 /90 CDC00053D004 DIN-Rail components for rolling stock applications

76171 A EAN Type code Order code kg pc. CCC413001F000 3 10 03085 S803S-UCB10 CCS863001R1105 0.735 1 13 0309 S803S-UCB13 CCS863001R1135 0.735 1 16 03108 S803S-UCB16 CCS863001R1165 0.735 1 S803S 0 03115 S803S-UCB0 CCS863001R105 0.735 1 5 031 S803S-UCB5 CCS863001R155 0.735 1 3 03139 S803S-UCB3 CCS863001R135 0.735 1 40 03146 S803S-UCB40 CCS863001R1405 0.735 1 50 03153 S803S-UCB50 CCS863001R1505 0.735 1 63 03160 S803S-UCB63 CCS863001R1635 0.735 1 80 03177 S803S-UCB80 CCS863001R1805 0.735 1 100 03184 S803S-UCB100 CCS863001R185 0.735 1 15 03191 S803S-UCB15 CCS863001R1845 0.735 1 S804S CCC413001F000 76171 A EAN Type code Order code 4 10 0307 S804S-UCB10 CCS864001R1105 0.98 1 13 0314 S804S-UCB13 CCS864001R1135 0.98 1 16 031 S804S-UCB16 CCS864001R1165 0.98 1 0 0338 S804S-UCB0 CCS864001R105 0.98 1 5 0345 S804S-UCB5 CCS864001R155 0.98 1 3 035 S804S-UCB3 CCS864001R135 0.98 1 40 0369 S804S-UCB40 CCS864001R1405 0.98 1 50 0376 S804S-UCB50 CCS864001R1505 0.98 1 63 0383 S804S-UCB63 CCS864001R1635 0.98 1 80 0390 S804S-UCB80 CCS864001R1805 0.98 1 100 03306 S804S-UCB100 CCS864001R185 0.98 1 15 03313 S804S-UCB15 CCS864001R1845 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /91

High performance MCBs S800S series 50000 DC range with ring terminal connection, UC, B characteristic S801S CCC413001F000 S800S, UC, B characteristic Function: protection and control of the circuits against overloads and short-circuits when a high breaking capacity is required; protection for people and big length cables in TN and IT systems; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream; version dedicated to application in direct circuits. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cu =50 ka 76171 S80S CCC413001F000 A EAN Type code Order code 1 10 10359 S801S-UCB10-R CCS86100R1105 0.45 1 13 10366 S801S-UCB13-R CCS86100R1135 0.45 1 16 10373 S801S-UCB16-R CCS86100R1165 0.45 1 0 10380 S801S-UCB0-R CCS86100R105 0.45 1 5 10397 S801S-UCB5-R CCS86100R155 0.45 1 3 10403 S801S-UCB3-R CCS86100R135 0.45 1 40 0844 S801S-UCB40-R CCS86100R1405 0.45 1 50 08431 S801S-UCB50-R CCS86100R1505 0.45 1 63 08448 S801S-UCB63-R CCS86100R1635 0.45 1 80 08455 S801S-UCB80-R CCS86100R1805 0.45 1 100 0846 S801S-UCB100-R CCS86100R185 0.45 1 15 08479 S801S-UCB15-R CCS86100R1845 0.45 1 76171 A EAN Type code Order code 10 10410 S80S-UCB10-R CCS8600R1105 0.49 1 13 1047 S80S-UCB13-R CCS8600R1135 0.49 1 16 10434 S80S-UCB16-R CCS8600R1165 0.49 1 0 10441 S80S-UCB0-R CCS8600R105 0.49 1 5 10458 S80S-UCB5-R CCS8600R155 0.49 1 3 10465 S80S-UCB3-R CCS8600R135 0.49 1 40 08486 S80S-UCB40-R CCS8600R1405 0.49 1 50 08493 S80S-UCB50-R CCS8600R1505 0.49 1 63 08509 S80S-UCB63-R CCS8600R1635 0.49 1 80 08516 S80S-UCB80-R CCS8600R1805 0.49 1 100 0853 S80S-UCB100-R CCS8600R185 0.49 1 15 08530 S80S-UCB15-R CCS8600R1845 0.49 1 /9 CDC00053D004 DIN-Rail components for rolling stock applications

76171 A EAN Type code Order code kg pc. S803S CCC413001F000 3 10 1047 S803S-UCB10-R CCS86300R1105 0.735 1 13 10489 S803S-UCB13-R CCS86300R1135 0.735 1 16 10496 S803S-UCB16-R CCS86300R1165 0.735 1 0 1050 S803S-UCB0-R CCS86300R105 0.735 1 5 10519 S803S-UCB5-R CCS86300R155 0.735 1 3 1056 S803S-UCB3-R CCS86300R135 0.735 1 40 08547 S803S-UCB40-R CCS86300R1405 0.735 1 50 08554 S803S-UCB50-R CCS86300R1505 0.735 1 63 08561 S803S-UCB63-R CCS86300R1635 0.735 1 80 08578 S803S-UCB80-R CCS86300R1805 0.735 1 100 08585 S803S-UCB100-R CCS86300R185 0.735 1 15 0859 S803S-UCB15-R CCS86300R1845 0.735 1 S804S CCC413001F000 76171 A EAN Type code Order code 4 10 10533 S804S-UCB10-R CCS86400R1105 0.98 1 13 10540 S804S-UCB13-R CCS86400R1135 0.98 1 16 10557 S804S-UCB16-R CCS86400R1165 0.98 1 0 10564 S804S-UCB0-R CCS86400R105 0.98 1 5 10571 S804S-UCB5-R CCS86400R155 0.98 1 3 10588 S804S-UCB3-R CCS86400R135 0.98 1 40 08608 S804S-UCB40-R CCS86400R1405 0.98 1 50 08615 S804S-UCB50-R CCS86400R1505 0.98 1 63 086 S804S-UCB63-R CCS86400R1635 0.98 1 80 08639 S804S-UCB80-R CCS86400R1805 0.98 1 100 08646 S804S-UCB100-R CCS86400R185 0.98 1 15 08653 S804S-UCB15-R CCS86400R1845 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /93

High performance MCBs S800S series 50000 DC range with cage terminal, UC, K characteristic S801S CCC413001F000 S800, UC, K characteristic Function: protection and control of the circuits like motors, transformer and auxiliary circuits, against overloads and short-circuits when a high breaking capacity is required; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream; version dedicated to application in direct circuits. Advantages: no nuisance tripping in the case of functional peak s up to 10xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cu =50 ka S80S CCC413001F000 76171 A EAN Type code Order code 1 10 0330 S801S-UCK10 CCS861001R147 0.45 1 13 03337 S801S-UCK13 CCS861001R1447 0.45 1 16 03344 S801S-UCK16 CCS861001R1467 0.45 1 0 03351 S801S-UCK0 CCS861001R1487 0.45 1 5 03368 S801S-UCK5 CCS861001R1517 0.45 1 3 03375 S801S-UCK3 CCS861001R1537 0.45 1 40 0338 S801S-UCK40 CCS861001R1557 0.45 1 50 03399 S801S-UCK50 CCS861001R1577 0.45 1 63 03405 S801S-UCK63 CCS861001R1597 0.45 1 80 0341 S801S-UCK80 CCS861001R167 0.45 1 100 0349 S801S-UCK100 CCS861001R1637 0.45 1 15 03436 S801S-UCK15 CCS861001R1647 0.45 1 76171 A EAN Type code Order code 10 03443 S80S-UCK10 CCS86001R147 0.49 1 13 03450 S80S-UCK13 CCS86001R1447 0.49 1 16 03467 S80S-UCK16 CCS86001R1467 0.49 1 0 03474 S80S-UCK0 CCS86001R1487 0.49 1 5 03481 S80S-UCK5 CCS86001R1517 0.49 1 3 03498 S80S-UCK3 CCS86001R1537 0.49 1 40 03504 S80S-UCK40 CCS86001R1557 0.49 1 50 03511 S80S-UCK50 CCS86001R1577 0.49 1 63 0358 S80S-UCK63 CCS86001R1597 0.49 1 80 03535 S80S-UCK80 CCS86001R167 0.49 1 100 0354 S80S-UCK100 CCS86001R1637 0.49 1 15 03559 S80S-UCK15 CCS86001R1647 0.49 1 /94 CDC00053D004 DIN-Rail components for rolling stock applications

76171 A EAN Type code Order code kg pc. S803S CCC413001F000 3 10 03566 S803S-UCK10 CCS863001R147 0.735 1 13 03573 S803S-UCK13 CCS863001R1447 0.735 1 16 03580 S803S-UCK16 CCS863001R1467 0.735 1 0 03597 S803S-UCK0 CCS863001R1487 0.735 1 5 03603 S803S-UCK5 CCS863001R1517 0.735 1 3 03610 S803S-UCK3 CCS863001R1537 0.735 1 40 0367 S803S-UCK40 CCS863001R1557 0.735 1 50 03634 S803S-UCK50 CCS863001R1577 0.735 1 63 03641 S803S-UCK63 CCS863001R1597 0.735 1 80 03658 S803S-UCK80 CCS863001R167 0.735 1 100 03665 S803S-UCK100 CCS863001R1637 0.735 1 15 0367 S803S-UCK15 CCS863001R1647 0.735 1 S804S CCC413001F000 76171 A EAN Type code Order code 4 10 03689 S804S-UCK10 CCS864001R147 0.98 1 13 03696 S804S-UCK13 CCS864001R1447 0.98 1 16 0370 S804S-UCK16 CCS864001R1467 0.98 1 0 03719 S804S-UCK0 CCS864001R1487 0.98 1 5 0376 S804S-UCK5 CCS864001R1517 0.98 1 3 03733 S804S-UCK3 CCS864001R1537 0.98 1 40 03740 S804S-UCK40 CCS864001R1557 0.98 1 50 03757 S804S-UCK50 CCS864001R1577 0.98 1 63 03764 S804S-UCK63 CCS864001R1597 0.98 1 80 03771 S804S-UCK80 CCS864001R167 0.98 1 100 03788 S804S-UCK100 CCS864001R1637 0.98 1 15 03795 S804S-UCK15 CCS864001R1647 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /95

High performance MCBs S800S series 50000 DC range with ring terminal connection, UC, K characteristic S801S CCC413001F000 S800S, UC, K characteristic Function: protection and control of the circuits like motors, transformer and auxiliary circuits, against overloads and short-circuits when a high breaking capacity is required; very useful when selectivity is needed vs an MCCB or back-up vs other MCBs wired downstream; version dedicated to application in direct circuits. Advantages: no nuisance tripping in the case of functional peak s up to 10xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947- Hazard level R6/HL3 according to EN 45545 Exigence according to NF F 16-101/10 (I3-F) Category 1 - Class B (Body mounted) according to IEC 61373 I cu =50 ka S80S CCC413001F000 76171 A EAN Type code Order code 1 10 10595 S801S-UCK10-R CCS86100R147 0.45 1 13 10601 S801S-UCK13-R CCS86100R1447 0.45 1 16 10618 S801S-UCK16-R CCS86100R1467 0.45 1 0 1065 S801S-UCK0-R CCS86100R1487 0.45 1 5 1063 S801S-UCK5-R CCS86100R1517 0.45 1 3 10649 S801S-UCK3-R CCS86100R1537 0.45 1 40 08660 S801S-UCK40-R CCS86100R1557 0.45 1 50 08677 S801S-UCK50-R CCS86100R1577 0.45 1 63 08684 S801S-UCK63-R CCS86100R1597 0.45 1 80 08691 S801S-UCK80-R CCS86100R167 0.45 1 100 08707 S801S-UCK100-R CCS86100R1637 0.45 1 15 08714 S801S-UCK15-R CCS86100R1647 0.45 1 76171 A EAN Type code Order code 10 10656 S80S-UCK10-R CCS8600R147 0.490 1 13 10663 S80S-UCK13-R CCS8600R1447 0.490 1 16 10670 S80S-UCK16-R CCS8600R1467 0.490 1 0 10687 S80S-UCK0-R CCS8600R1487 0.490 1 5 10694 S80S-UCK5-R CCS8600R1517 0.490 1 3 10700 S80S-UCK3-R CCS8600R1537 0.490 1 40 0871 S80S-UCK40-R CCS8600R1557 0.490 1 50 08738 S80S-UCK50-R CCS8600R1577 0.490 1 63 08745 S80S-UCK63-R CCS8600R1597 0.490 1 80 0875 S80S-UCK80-R CCS8600R167 0.490 1 100 08769 S80S-UCK100-R CCS8600R1637 0.490 1 15 08776 S80S-UCK15-R CCS8600R1647 0.490 1 /96 CDC00053D004 DIN-Rail components for rolling stock applications

76171 A EAN Type code Order code kg pc. S803S CCC413001F000 3 10 10717 S803S-UCK10-R CCS86300R147 0.735 1 13 1074 S803S-UCK13-R CCS86300R1447 0.735 1 16 10731 S803S-UCK16-R CCS86300R1467 0.735 1 0 10748 S803S-UCK0-R CCS86300R1487 0.735 1 5 10755 S803S-UCK5-R CCS86300R1517 0.735 1 3 1076 S803S-UCK3-R CCS86300R1537 0.735 1 40 08783 S803S-UCK40-R CCS86300R1557 0.735 1 50 08790 S803S-UCK50-R CCS86300R1577 0.735 1 63 08806 S803S-UCK63-R CCS86300R1597 0.735 1 80 08813 S803S-UCK80-R CCS86300R167 0.735 1 100 0880 S803S-UCK100-R CCS86300R1637 0.735 1 15 08837 S803S-UCK15-R CCS86300R1647 0.735 1 S804S CCC413001F000 76171 A EAN Type code Order code 4 10 10779 S804S-UCK10-R CCS86400R147 0.98 1 13 10786 S804S-UCK13-R CCS86400R1447 0.98 1 16 10793 S804S-UCK16-R CCS86400R1467 0.98 1 0 10809 S804S-UCK0-R CCS86400R1487 0.98 1 5 10816 S804S-UCK5-R CCS86400R1517 0.98 1 3 1083 S804S-UCK3-R CCS86400R1537 0.98 1 40 08844 S804S-UCK40-R CCS86400R1557 0.98 1 50 08851 S804S-UCK50-R CCS86400R1577 0.98 1 63 08868 S804S-UCK63-R CCS86400R1597 0.98 1 80 08875 S804S-UCK80-R CCS86400R167 0.98 1 100 0888 S804S-UCK100-R CCS86400R1637 0.98 1 15 08899 S804S-UCK15-R CCS86400R1647 0.98 1 DIN-Rail components for rolling stock applications CDC00053D004 /97

MCBs S500UC series technical features S500 UC Standards Product Standard IEC/EN 60947- S501UC CCC413001F000 Hazard level acc. to EN 45545- R6/HL3 Classification according to NF F 16-101/10 I / F0 (Exigence 4) Resistance to shocks and vibrations acc. to Category 1 - Class A/B - Body mounted IEC 61373 GOST 919-88 approval Yes General data Poles 1P, P, 3P, 4P Tripping characteristics K adjustable A adjustable 0.1 3 /.8 11 / 10 45 frequency f Hz insulation voltage U i acc. to IEC/EN 60664-1 V 1000 V DC impulse withstand voltage U imp. (1./50μs) kv 6 kv Max. power frequency recovery voltage (U max ) V 50 per pole (4P: 750 V) breaking capacity acc. to IEC/EN 60947-1P@ 50 VDC P@500 VDC 3P, 4P@ 750 VDC ultimate I cu ka 30 ka Protection degree housing IP4X terminals IPX Mechanical features Toogle grey sealable in ON-OFF position Tropicalization acc. to IEC/EN 60068- humid heat C/RH DIN 50016 Reference temperature for setting of thermal element C 40 C Ambient temperature (with daily average +35 C) C 5 +55 C Installation Terminal type cage (shock protected) Terminal size top/bottom for cable IEC mm 1 5 mm² UL/CSA AWG 17 4 AWG Cross-section of busbars mm AWG Tightening torque IEC Nm.5 Nm in-lbs. Screwdriver Nr. Pozidriv Mounting on DIN-Rail EN 60715 Connection from top and bottom Dimensions and weight Mounting dimensions acc. to DIN 43880 Pole dimensions (H x D x W) mm 91 x 9 x 5 mm Pole weight g approx. 50 g Combination with auxiliary elements See table page 4/30 /98 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs S500UC series DC range, K characteristic S501UC CCC413001F000 S500UC series, K (power) characteristic Function: protection and control of the circuits like motors, transformer and auxiliary circuits, against overloads and short-circuits when an high breaking capacity is required; very useful when it is needed selectivity vs an MCCB or back-up vs other MCBs wired downstream; version with adjustable thermal release, dedicated to protect motors; version dedicated to application in direct circuits. Advantages: No nuisance tripping in the case of functional peak s up to 8xIn, depending on the series; through its highly sensitive thermostatic bimetal trip, the K-type characteristic offers protection to damageable elements in the over range; it also provides the best protection to cables and lines. Standards: IEC/EN 60947--1 Hazard level R6/HL3 according to EN 45545 Exigence 4 according to NF F 16-101/10 (I-F0) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cu up to 30 ka 76170 A EAN Type code Order code 1 0.1-0.15 30000 S501 UC-K0.1-0.15 CCF008988R0001 0.50 1 0.14-0.1 30017 S501 UC-K0.14-0.1 CCF008991R0001 0.50 1 0.-0.3 3004 S501 UC-K0. - 0.3 CCF008994R0001 0.50 1 0.8-0.4 30031 S501 UC-K0.8-0.4 CCF008997R0001 0.50 1 0.38-0.58 30048 S501 UC-K0.38-0.58 CCF009000R0001 0.50 1 0.53-0.8 30055 S501 UC-K0.53-0.8 CCF009003R0001 0.50 1 0.73-1.1 3006 S501 UC-K0.73-1.1 CCF009006R0001 0.50 1 1-1.5 30079 S501 UC-K1-1.5 CCF009009R0001 0.50 1 1.4-.1 30086 S501 UC-K1.4 -.1 CCF00901R0001 0.50 1-3 30093 S501 UC-K-3 CCF009015R0001 0.50 1.8-4. 30109 S501 UC-K.8-4. CCF009018R0001 0.50 1 3.8-5.8 30116 S501 UC-K3.8-5.8 CCF00901R0001 0.50 1 5.3-8 3013 S501 UC-K5.3-8 CCF00904R0001 0.50 1 7.3-11 30130 S501 UC-K7.3-11 CCF00907R0001 0.50 1 10-15 30147 S501 UC-K10-15 CCF009030R0001 0.50 1 14-0 30154 S501 UC-K14-0 CCF009033R0001 0.50 1 18-6 30161 S501 UC-K18-6 CCF009036R0001 0.50 1 3-3 30178 S501 UC-K3-3 CCF009039R0001 0.50 1 9-37 30185 S501 UC-K9-37 CCF00904R0001 0.50 1 34-41 3019 S501 UC-K34-41 CCF009045R0001 0.50 1 38-45 3008 S501 UC-K38-45 CCF009048R0001 0.50 8 DIN-Rail components for rolling stock applications CDC00053D004 /99

MCBs S500UC series DC range, K characteristic 76170 CCC413001F000 A EAN Type code Order code 0.1-0.15 3053 S50 UC-K0.1-0.15 CCF008989R0001 0.500 1 0.14-0.1 3060 S50 UC-K0.14-0.1 CCF00899R0001 0.500 1 0.-0.3 3077 S50 UC-K0. - 0.3 CCF008995R0001 0.500 1 S50UC 0.8-0.4 3084 S50 UC-K0.8-0.4 CCF008998R0001 0.500 1 0.38-0.58 3091 S50 UC-K0.38-0.58 CCF009001R0001 0.500 1 0.53-0.8 30307 S50 UC-K0.53-0.8 CCF009004R0001 0.500 1 0.73-1.1 30314 S50 UC-K0.73-1.1 CCF009007R0001 0.500 1 1-1.5 3031 S50 UC-K1-1.5 CCF009010R0001 0.500 1 1.4-.1 30338 S50 UC-K1.4 -.1 CCF009013R0001 0.500 1-3 30345 S50 UC-K-3 CCF009016R0001 0.500 1.8-4. 3035 S50 UC-K.8-4. CCF009019R0001 0.500 1 CCC413001F000 3.8-5.8 30369 S50 UC-K3.8-5.8 CCF0090R0001 0.500 1 5.3-8 30376 S50 UC-K5.3-8 CCF00905R0001 0.500 1 7.3-11 30383 S50 UC-K7.3-11 CCF00908R0001 0.500 1 10-15 30390 S50 UC-K10-15 CCF009031R0001 0.500 1 S503UC 14-0 30406 S50 UC-K14-0 CCF009034R0001 0.500 1 18-6 30413 S50 UC-K18-6 CCF009037R0001 0.500 1 3-3 3040 S50 UC-K3-3 CCF009040R0001 0.500 1 9-37 30437 S50 UC-K9-37 CCF009043R0001 0.500 1 34-41 30444 S50 UC-K34-41 CCF009046R0001 0.500 1 38-45 30451 S50 UC-K38-45 CCF009049R0001 0.500 1 76170 A EAN Type code Order code 3 0.1-0.15 30505 S503 UC-K0.1-0.15 CCF008990R0001 0.750 1 0.14-0.1 3051 S503 UC-K0.14-0.1 CCF008993R0001 0.750 1 0.-0.3 3059 S503 UC-K0. - 0.3 CCF008996R0001 0.750 1 0.8-0.4 30536 S503 UC-K0.8-0.4 CCF008999R0001 0.750 1 0.38-0.58 30543 S503 UC-K0.38-0.58 CCF00900R0001 0.750 1 0.53-0.8 30550 S503 UC-K0.53-0.8 CCF009005R0001 0.750 1 0.73-1.1 30567 S503 UC-K0.73-1.1 CCF009008R0001 0.750 1 1-1.5 30574 S503 UC-K1-1.5 CCF009011R0001 0.750 1 1.4-.1 30581 S503 UC-K1.4 -.1 CCF009014R0001 0.750 1-3 30598 S503 UC-K-3 CCF009017R0001 0.750 1.8-4. 30604 S503 UC-K.8-4. CCF00900R0001 0.750 1 3.8-5.8 30611 S503 UC-K3.8-5.8 CCF00903R0001 0.750 1 5.3-8 3068 S503 UC-K5.3-8 CCF00906R0001 0.750 1 7.3-11 30635 S503 UC-K7.3-11 CCF00909R0001 0.750 1 10-15 3064 S503 UC-K10-15 CCF00903R0001 0.750 1 14-0 30659 S503 UC-K14-0 CCF009035R0001 0.750 1 18-6 30666 S503 UC-K18-6 CCF009038R0001 0.750 1 3-3 30673 S503 UC-K3-3 CCF009041R0001 0.750 1 9-37 30680 S503 UC-K9-37 CCF009044R0001 0.750 1 34-41 30697 S503 UC-K34-41 CCF009047R0001 0.750 1 38-45 30703 S503 UC-K38-45 CCF009050R0001 0.750 1 /100 CDC00053D004 DIN-Rail components for rolling stock applications

76170 A EAN Type code Order code kg pc. S504UC CCC41017F0001 4 0.1-0.15 30758 S504UC-K0.15 CCF011771R0001 0.9 1 0.14-0.1 30765 S504UC-K0.1 CCF01177R0001 0.9 1 0.-0.3 3077 S504UC-K0.3 CCF011576R0001 0.9 1 0.8-0.4 30789 S504UC-K0.4 CCF011773R0001 0.9 1 0.38-0.58 30796 S504UC-K0.58 CCF011774R0001 0.9 1 0.53-0.8 3080 S504UC-K0.8 CCF011775R0001 0.9 1 0.73-1.1 30819 S504UC-K1.1 CCF011776R0001 0.9 1 1-1.5 3086 S504UC-K1.5 CCF011777R0001 0.9 1 1.4-.1 30833 S504UC-K.1 CCF011778R0001 0.9 1-3 30840 S504UC-K3 CCF011779R0001 0.9 1.8-4. 30857 S504UC-K4. CCF011780R0001 0.9 1 3.8-5.8 30864 S504UC-K5.8 CCF011781R0001 0.9 1 5.3-8 30871 S504UC-K8 CCF01178R0001 0.9 1 7.3-11 30888 S504UC-K11 CCF011509R0001 0.9 1 10-15 30895 S504UC-K15 CCF011783R0001 0.9 1 14-0 30901 S504UC-K0 CCF011784R0001 0.9 1 18-6 30918 S504UC-K6 CCF011785R0001 0.9 1 3-3 3095 S504UC-K3 CCF011786R0001 0.9 1 9-37 3093 S504UC-K37 CCF011787R0001 0.9 1 34-41 30949 S504UC-K41 CCF011788R0001 0.9 1 38-45 30956 S504UC-K45 CCF011789R0001 0.9 1 DIN-Rail components for rolling stock applications CDC00053D004 /101

/10 CDC00053D004 DIN-Rail components for rolling stock applications

DIN-Rail components for rolling stock applications Residual devices Residual devices RCBO DS01 T 3 DIN-Rail components for rolling stock applications CDC00053D004 3/1

RCBO DS01 T 1P+N. The details make the difference A range designed for rolling stock equipments 3 Information on the device are laser printed to ensure readability over time. DS01 T terminals are composed by two different seats, a front seat for 5 mm² cables and a back seat for 10 mm² busbars. The label carrier to clearly identify the protected circuit. Test pushbutton to verify the correct functioning of the device Each DS01 T has an RFid tag containing a unique serial number assigned to ABB according to the standard ISO/IEC FCD 15693-3 in order to authenticate the product. 3/ CDC00053D004 DIN-Rail components for rolling stock applications

3 In the DS01 T range of RCBOs for traction, specific materials are used that are classified with an hazard level R6/ HL3 according to EN 45545-. Plastic materials are also classified I-F3 according the NF F 16-101/10 ( Railway Rolling Stock Fire Behavior-Choice of Materials and Railway Rolling Stock Fire Behavior- Choice of Materials, Application to Electrical Equipment ) thus responding to exigence 3. Additionally to the high quality standards and the fl ammability requirements, rail applications have specifi c demands that have to be to fulfi lled like resistance to shocks and vibrations. The resistance to vibrations and shocks of RCBOs DS01 T has been positively tested according to: IEC 61373 010 05 Edition.0 Rolling stock equipment Shock and vibration tests considering Category 1,Class A and Class B. The terminals available make easier the supply operation in parallel with busbars as they are composed by two different seats, a front seat for 5 mm cables and a back seat for 10 mm busbars. All the devices of the series have been tested in a wide range of temperatures: from -5 C (as indicated by the snowflake marked on the front side) up to +55 C. Label carrier for clear and reliable identification. With the practical label carrier fitted in the new circuit breakers you can give maximum visibility to the information relating to the protected loads. Any earth fault can be immediately identifi ed through the blue indicator, that signals the differential tripping and which cannot be activated in case of manual operation on the toggle. This prevents any misinterpretations of the device and system status. DS01 T RCBOs share the wide range of accessories of the System pro M compact family: auxiliary contact, signal/ auxiliary contact and shunt trips. Contact position indicator (CPI): to always know the status of the contacts (red: closed contacts; green: open contacts). DIN-Rail components for rolling stock applications CDC00053D004 3/3

RCBOs DS01 T technical features 3 CSC400005F00 DS01 T Standards Product Standard IEC/ EN 61009 Hazard level acc. to EN 45545- R6/HL3 Classification according to NF F 16-101/10 I / F3 (Exigence 3) Resistance to shocks and vibrations acc. to IEC 61373 Category 1, Class A/B Body mounted GOST 919-88 approval Yes Electrical Type (wave form of the earth leakage sensed) A features Poles 1P+N A 6 40 sensitivity I n A 0.03 A voltage U e IEC V 30-40 V Insulation voltage U i V 500 V Max. operating voltage of circuit test IEC V 54 V Min. operating voltage of circuit test V 110 V frequency Hz 50 60 Hz breaking capacity acc. to IEC/EN 61009 ultimate I cn A 6000 A breaking capacity acc. to IEC/EN 60947- ultimate I cu ka 10 ka 1P+N @30 VAC service I cs ka 6 ka residual breaking capacity I m ka 6 ka impulse withstand voltage (1./50) U imp kv 4 kv Dielectric test voltage at ind. freq. for 1 min. kv.5 kv Thermomagnetic release characteristic B: 3 I m 5 n C: 5 I m 10 n K: 10 I m 14 n Surge resistance (wave 8/0) A 50 A 3/4 CDC00053D004 DIN-Rail components for rolling stock applications

DS01 T Mechanical Toggle black sealable in ON-OFF position features Flag indicator differential trip indicator (black) contact position indicator (green/red) Electrical life 10000 ops. Mechanical life 0000 ops. Protection degree housing IP4X terminals IPX Environmental conditions (damp heat) C/RH 8 cycles with 55 C/90-96% and 5 C/95-100% acc. to IEC/EN 60068--30 Reference temperature for setting of C 30 C thermal element Ambient temperature (with daily average IEC C -5 +55 C +35 C) Storage temperature C -40 +70 C Installation Terminal type top failsafe bi-directional cylinder-lift terminal (shock protected) bottom failsafe bi-directional cylinder-lift terminal (shock protected) Terminal size top/bottom for cable IEC mm (rigid and flexible) up to 5/5 mm² Terminal size top/bottom for busbar IEC mm 10 mm²/10 mm² Tightening torque IEC Nm 1. Nm Mounting on DIN-Rail EN 60715 (35 mm) by means of fast clip device Connection from top and bottom Dimensions Dimensions (H x D x W) mm 85 x 69 x 35 mm and weight g 39 g Combination with auxiliary elements See table page 4/5 3 DIN-Rail components for rolling stock applications CDC00053D004 3/5

RCBOs DS01 T series 6000 A type, B, C and K characteristics 3 DS01 T CSC400005F00 DS01 T A type Function: protection of end user single-phase circuits against overload and short-circuit s; protection against the effects of sinusoidal alternating and direct pulsating earth fault s; protection against indirect contact and additional protection against direct contact (I Δn =30 ma). Standards: IEC/EN 61009 Hazard level R6/HL3 according to EN 45545 Exigence 3 according to NF F 16-101/10 (I-F3) Category 1 - Class A/B (Body mounted) according to IEC 61373 I cn =6 ka B characteristic residual I Δn ma A 80154 EAN Type code Order code kg pc. 1+N 30 6 00031 DS01T B6 A30 CSR55148R1065 0.40 1 10 001935 DS01T B10 A30 CSR55148R1105 0.40 1 13 031437 DS01T B13 A30 CSR55148R1135 0.40 1 16 001836 DS01T B16 A30 CSR55148R1165 0.40 1 0 001737 DS01T B0 A30 CSR55148R105 0.40 1 5 031338 DS01T B5 A30 CSR55148R155 0.40 1 3 001638 DS01T B3 A30 CSR55148R135 0.40 1 40 001539 DS01T B40 A30 CSR55148R1405 0.40 1 C characteristic residual I Δn ma A 80154 EAN Type code Order code kg pc. 1+N 30 6 001430 DS01T C6 A30 CSR55148R1064 0.40 1 10 001331 DS01T C10 A30 CSR55148R1104 0.40 1 13 0013 DS01T C13 A30 CSR55148R1134 0.40 1 16 6983 DS01T C16 A30 CSR55148R1164 0.40 1 0 648437 DS01T C0 A30 CSR55148R104 0.40 1 5 648338 DS01T C5 A30 CSR55148R154 0.40 1 3 97031 DS01T C3 A30 CSR55148R134 0.40 1 40 95334 DS01T C40 A30 CSR55148R1404 0.40 1 K characteristic residual ma A 80154 EAN Type code Order code kg pc. 1+N 30 6 959434 DS01T K6 A30 CSR55148R1067 0.40 1 10 959137 DS01T K10 A30 CSR55148R1107 0.40 1 13 958833 DS01T K13 A30 CSR55148R1137 0.40 1 16 958536 DS01T K16 A30 CSR55148R1167 0.40 1 0 960539 DS01T K0 A30 CSR55148R107 0.40 1 5 960331 DS01T K5 A30 CSR55148R157 0.40 1 3 960133 DS01T K3 A30 CSR55148R137 0.40 1 40 959731 DS01T K40 A30 CSR55148R1407 0.40 1 3/6 CDC00053D004 DIN-Rail components for rolling stock applications

DIN-Rail components for rolling stock applications Auxiliary elements and accessories Selection tables Auxiliary elements for MCBs S 00 series and RCBOs DS01 T 4 Busbar and accessories for MCBs S 00 series 10 Auxiliary elements for MCBs S 80 UC 17 Auxiliary elements and accessories for MCBs S800S series Auxiliary elements for MCBs S500 UC 30 4 DIN-Rail components for rolling stock applications CDC00053D004 4/1

Auxiliary elements and accessories Selection tables 4 Accessory Auxiliary and Signal Contacts SC-S/H6R SC-H6R SC-H.. S-H.. S-H..X Standards EN 45545 R6/HL3 R6/HL3 R6/HL3 R6/HL3 R6/HL3 NF F 16-101/10 I/F1 - Exigence 4 I/F1 - Exigence 4 I3/F - Exigence I/F1 - Exigence 4 I/F1 - Exigence 4 IEC 61373 Category 1 - Class A/B Category 1 - Class A/B Category 1 - Class A/B Category 1 - Class A/B Category 1 - Class A/B Combinable with: S00 MT S00 MT UC S00 M UC S00 P S80 UC S800S S800S UC S500 UC DS01 T Accessory Shunt trip Motor operating device SC-Ax S-Ax S800-SOR SC-CMx Standards EN 45545 R6/HL3 R6/HL3 R6/HL3 NF F 16-101/10 I/F3 - Exigence 3 I/F1 - Exigence 4 I3/F - Exigence I3 / F1 - Exigence IEC 61373 Category 1 - Class A/B Category 1 - Class A/B Category 1 - Class B Category 1 - Class A/B Combinable with: S00 MT S00 MT UC S00 M UC S00 P S80 UC S800S S800S UC S500 UC DS01 T 4/ CDC00053D004 DIN-Rail components for rolling stock applications

S-S S-S/H S800-AUX S800 AUX/ALT S500-Hxx S500-Sxx R6/HL3 R6/HL3 R6/HL3 R6/HL3 R6/HL3 R6/HL3 I/F1 - Exigence 4 I/F1 - Exigence 4 I3/F - Exigence I3/F - Exigence I/F - Exigence 3 I/F - Exigence 3 Category 1 - Class A/B Category 1 - Class A/B Category 1 - Class B Category 1 - Class B Category 1 - Class B Category 1 - Class B 4 Undervoltage Release Remote Switch Unit Short Circuit Limiter S-UA S800-UVR S500-UA S800-RSU-H S500-RSU-H S803S-SCL R6/HL3 R6/HL3 R6/HL3 R6/HL3 R6/HL3 R6/HL3 I/F1 - Exigence 4 I3/F - Exigence I/F0 - Exigence 4 I/F3 - Exigence 3 I/F3 - Exigence 3 I3/F - Exigence Category 1 - Class A/B Category 1 - Class B Category 1 - Class A/B - - Category 1 - Class B DIN-Rail components for rolling stock applications CDC00053D004 4/3

Auxiliary elements and accessories for MCBs and RCDs Selection tables Combination of auxiliary elements with S 00 MCBs series 4 H Auxiliary contact SC-H6R S/H Signal/Auxiliary contact SC-S/H6R S/H (H) Signal/Auxiliary contact used as auxiliary contact SC-S/H6R ST Shunt trip for S 00 MCB SC-A... H-BF Auxiliary contact for MCBs bottom fitting (1 for each pole of MCB) SC-H01/SC-H10 4/4 CDC00053D004 DIN-Rail components for rolling stock applications

Combination of S 00 P MCBs series with motor operating device Combination of auxiliary elements with DS01 T + S/H + H MOD-S + S/H + S/H (H) 4 S 00 P DS01 T ST MOD-S + H + H ST Shunt trip for S 00 P MCB SC-A... S ST-F/UR MOD-S Motor operating device SC-CM... H H H Auxiliary contact SC-H6R S/H Signal/Auxiliary contact SC-S/H6R S/H (H) Signal/Auxiliary contact used as auxiliary contact SC-S/H6R SN 01 S/H S/H (H) IH S/H S/H (H) H H F 00 * ARH DIN-Rail components for rolling stock applications CDC00053D004 4/5

Auxiliary elements for S 00 series and DS01 T Auxiliary contact and signal/auxiliary contact SC-H6R and SC-S/H6R CSC400465F001 Conventional free air thermal A 10 A Min. operational /voltage* 10 ma at 1 V; 5 ma at 4 V conditional short-circuit V 30 V AC 1.000 A with S01 K4 Overvoltage category III SC-S/H6R impuls withstand voltage kv 4 kv (1./50µs) 4 Cross-section of conductors mm 0.75.5 mm (up to x 1.5 mm ) Tightening torque Nm 1. Nm Contact stability in vibration test 5g, 0 sweep cycles 5 150 5 Hz at 4 V AC/DC, 5 ma auto- according to IEC/EN 60 068--6 matic reclosing < 10 ms Mechanical service life 10000 operations Dimensions (H x D x W) mm 85 x 69 x 8.8 mm * ensures safe contacting without interruption by pollution layer CSC40034F001 Signal/auxiliary contacts Function SC-S/H6R: choice through a selector between indication of the position of the device s contacts and signalling of the fault (over/short-circuit for MCBs and RCBOs; earth fault for RCBOs). Function SC-H6R: indication of the position of the device s contacts. To be mounted on the left side of the MCBs thanks to the special pin. SC-H6-... Description 4016779 EAN Type code Order code Signal contact/ auxiliary switch 1CO 563819 SC-S/H6R CDS009R0001 0.04 1 Auxiliary contact 1CO 56386 SC-H6R CDS0091R0001 0.04 1 4/6 CDC00053D004 DIN-Rail components for rolling stock applications

SC-H... CSC400155F001 Bottom-fitting auxiliary contact Contact element SC-H10 and SC-H01 1NO (1 make contact), 1NC (1 normally closed contact), leading make contact, late closing Utilization category AC14 A/30V - DC 1 identical DC13/DC13 1A /50V, A/30V Min. operational /voltage* V 10 ma at 1 V AC/DC conditional short-circuit 30 VAC 1000 A, fault protection with S 01-K or Z Electrical serviceable life > 4000 switchover cycles Standard VDE 0106 Part 101 Connection cross-section mm 0.75....5 4 Tightening torque Nm 0.5 * ensures safe contacting without interruption by pollution layer Bottom-fitting auxiliary contacts for S00 MCBs series Description 4016779 EAN Type code Order code 1 NC 64551 5 S C-H01 CDS 00 970 R0001 0.01 1 1 NO 6455 S C-H10 CDS 00 970 R000 0.01 1 packing 15 parts Description 4016779 EAN Type code Order code 1 NC 64677 S C-H01 15x CDS 00 970 R0011 0.01 15 1 NO 64681 9 S C-H10 15x CDS 00 970 R001 0.01 15 Auxiliary contact bridge for bottom-fitting auxiliary contacts Wire jumper for integrated auxiliary contacts SC-H01/SC-H10 for series connections (HKB) or parallel connections (HKB1). Description 80154 EAN Type code Order code 1/ mod. 53134 HKB GH V036 0504 R0100 0.001 1000 1 mod. 5409 HKB 1 GH V036 0504 R0101 0.001 1000 Utilization category / contact capacity SC-H6R, SC-S/H6R AC14 U e V 400 V 30 V I e A 1 A A DC1 U e V 0 V 110 V I e A 1 A 1.5 A DC13 U e V 60 V 4 V I e A A 4 A DIN-Rail components for rolling stock applications CDC00053D004 4/7

Auxiliary elements for S 00 series Shunt trip for S 00 MCBs 4 SC-A CSC400471F001 SC-A1 voltage AC V 1 60 V AC DC V 1 60 V DC Max release duration ms <10 ms Min. release voltage AC V 7 V AC DC V 10 V DC Consumption on release U b V 1 V DC 1 V AC 4 V DC 4 V AC 60 V DC 60 V AC I b max A. A.5 A 4.5 A 5 A 14 A 8.8 A Coil resistance Ω 3.7 Ω Terminals mm 16 mm Tightening torque Nm.5 Nm Dimensions (H x D x W) mm 85 x 69 x 17.5 mm SC-A voltage AC V 110 415 V AC DC V 110 50 V DC Max release duration ms <10 ms Min. release voltage AC V 55 V AC DC V 80 V DC Consumption on release U b V 110 V DC 110 V AC 0 V DC 30 V AC 415 V AC I b max A 0.35 A 0.5 A 1.1 A 1.0 A.7 A Coil resistance Ω 5 Ω Terminals mm 16 mm Tightening torque Nm.5 Nm Dimensions (H x D x W) mm 85 x 69 x 17.5 mm Shunt trips Function: remote opening of the device when a voltage is applied. voltage 4016779 EAN Type code Order code AC/DC 1 60 V 57099 SC-A1 CDS00909R0001 0.15 1 AC 110 415 V/DC110 50 V 571005 SC-A CDS00909R000 0.15 1 4/8 CDC00053D004 DIN-Rail components for rolling stock applications

Motor operating and autoreclosing devices for S 00 P series Motor operating devices SC-CM SC-CM CSC40048F001 Supply V 1... 30 V AC +10% - 15% (50-60Hz); 1... 48 V DC +10% - 15% Power consumption 1 V AC VA < 15 VA during the 4 V AC VA < VA operation 30 V AC VA < 5 VA 1... 48 V DC VA < 0 VA Power consumption at rest VA < 1.5 VA Make-time at ambient temperature sec < 1 sec Opening time at ambient temperature sec < 0.5 sec of operations < 0,000 Operating temperature C - 5... + 55 C Cables length of control circuit m < 1500 m Cables cross-section mm <.5 mm 4 Signal contact (terminals 3 4 5) Current carrying capacity Auxiliary contact (terminals 6 7 8) Current carrying capacity Remote control* Remote control terminals 1NA + 1NC (change-over contact) 5 A (50 V AC) (inductiveohmic load) 1NA + 1NC (change-over contact) 3 A (50 V AC) (inductiveohmic load) By means of dry contacts Terminal 9 = make contact; Terminal 10 = opening contact Terminal 11 = common reference for control contacts, +5 V DC (supplied by the motor operating device) * Note: In case of the device opening due to a fault, please wait 8 seconds before attempting to reclose the motor operator. Motor operating devices Function: SC-CM allows the remote control (opening or closing) of the coupled device. of S 00 P MCB 80154 EAN Type code Order code 1 0659 SC-CM1 CSS01997R0013 0.166 1 and 3 06358 SC-CM/3 CSS03997R0013 0.166 1 4 06457 SC-CM4 CSS04997R0013 0.166 1 DIN-Rail components for rolling stock applications CDC00053D004 4/9

Busbars and accessories for MCBs S 00 series PS busbars Short description ABB busbar systems enable the safe and economic cross connection of MCBs, RCCBs and RCBOs. 4 For a correct busbar selection the following points need to be considered: MCB terminal type (Twin terminal or cage terminal) (1,, 3, 4, 1+N or 3+N) Device type (MCB, RCCB or RCBO) Combinations (e.g. RCCB + MCB or RCCB 3+N + RCCB 1+N) Use of side mounted auxiliary elements on MCB *) Busbar diameter (for carrying capacity calculation) of modules (choice of standard busbar or busbar for cutting) Coding of PS busbars PS / / 1 3 4 5 6 7 7 Phases 1 phase 1 phases 3 phases 3 4 phases 4 of pins Diameter 10 mm - - 6 mm 6-16 mm 1 6 30 mm 3 0 Application Cross connection of RCCB and MCB (4th pin removed for RCCB 3+N) F I Use of neutral conductor (phase sequence e.g. L1-N-L-N-L3-N-L1...) N Space for 1 side mounted auxiliary contact H Space for side mounted auxiliary contacts H Pins for breaking off Cross connection of devices 3P+N + 1P+N (phase sequence L1-L-L3-N-L1-N-L-N-L1-N-...) N N Busbars for IT networks I T A Note: Combinations of above applications are possible *) only right side mounted auxiliary elements and bottom fixed auxiliary contacts can be considered for busbar connection 4/10 CDC00053D004 DIN-Rail components for rolling stock applications

Busbars and accessories for MCBs S 00 series PS busbars technical features Busbars PS Suitable for MCB: S00MT and S00P Electrical Data Standards for IEC applications DIN EN 60947-1 VDE 0660 Part 100 = IEC 60947-1:004 Approvals voltage Ue 1P, P, 3P, 4P: 690 V AC, 690 V DC frequency Hz 50 / 60 Hz, DC Current carrying capacity / Phase (35 C ambient A 10 mm 16 mm 30 mm temperature) End feeding ➀ 63 A 80 A 10 A Non-end 100 A 130 A 160 A feeding ➀ Short-circuit withstand capacity ka 5 ka in series with fuse NH3 355 A gg 500 V Mechanical Housing light grey, RAL 7035 Data Environmental conditions acc. to DIN EN 60068 Overvoltage category III Pollution degree Installation Cross-Section Busbar 10 mm, 16 mm, 30 mm Mounting position optional Supply Feed on terminal of the device (supply side optional) or use of feeder terminal range AST; SZ-ESK Accessories Shock-protection caps BSK, SZ-BSK Feeder terminals range AST, SZ-ESK 4 End caps range END, PS-END, PSB-END Feeder Terminals AST, SZ-ESK Electrical Data Max. operating voltage V 690 V AC, 690 V DC Current carrying capacity / phase A see below ➀ Cross-Section mm SZ-ESK 6-35 mm 100 A 6-50 mm 15 A mm AST 6-5 mm 80 A 6-50 mm 15 A Instruction of installation When cutting the busbar, ensure that the insulation profile exceeds the copper bar by approx. 10 mm on each side. Shock protection only with mounted end caps ensured. For DC applications the required increased clearance and creepage distances needs to be ensured. ➀ In case of feed in from the middle of the busbar it needs to be ensured, that the sum of junction s per side must not exceed the max busbar I s /phase. Irrespective of the carrying capacity (I s ) of the busbar, the max. rated of the devices terminal may not be exceeded. Feed in from the end of the busbar Feed in from the middle of the busbar DIN-Rail components for rolling stock applications CDC00053D004 4/11

Busbars and accessories for MCBs S 00 series PS busbars Pre-assembled busbars (not to be cut) PS 1/ - PS 1/1 SK 007 B 99 1-phase busbars, pin distance 17.6 mm, end caps PS-END 0 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code kg pc. 1 10 0.01 463003 PS1/ CDL 10 001 R100 0.01 180 3 1 10 0.03 514651 PS1/3 CDL 10 001 R1003 0.03 10 4 1 10 0.03 64833 PS1/4 CDL 10 001 R1004 0.03 100 6 1 10 0.03 46310 PS1/6 CDL 10 001 R1006 0.03 60 4 9 1 10 0.04 46301 PS1/9 CDL 10 001 R1009 0.04 30 1 1 10 0.05 463300 PS1/1 CDL 10 001 R101 0.05 30 1 1 10a 0.05 68985 PS1/1A ➁ CDL 10 010 R101 0.05 30 3-phase busbars, pin distance 17.6 mm PS 3/6 - PS 3/1 SK 008 B 99 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 6 3 10 0.04 463409 PS3/6 CDL 31 001 R1006 0.04 60 9 3 10 0.07 463508 PS3/9 CDL 31 001 R1009 0.07 30 1 3 10 0.10 463607 PS3/1 CDL 31 001 R101 0.10 30 1 3 10 0.10 463706 PS3/1FI * CDL 31 00 R101 0.09 50 * phase sequence: L1, L, L3, free, L, L3, L1,... Busbars suitable for cutting 1-phase busbars, pin distance 17.6 mm, end caps PS-END 0 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 60 1 10 0.6 514668 PS1/60 CDL 10 001 R1060 0.6 0 60 1 10 0.6 6899 PS1/60A ➁ CDL 10 010 R1060 0.8 50 60 1 16 0.41 516655 PS1/60/16 CDL 10 001 R1660 0.41 0 60 1 16 0.41 683005 PS1/60/16A ➁ CDL 10 010 R1660 0.39 50 5 1 30 0.04 65344 PS1/5/30 ➀ CDL 10 001 R3005 0.04 100 10 1 30 0.09 65368 PS1/10/30 ➀ CDL 10 001 R3010 0.09 100 11 1 30 0.09 65375 PS1/11/30 ➀ CDL 10 001 R3011 0.10 100 14 1 30 0.10 6538 PS1/14/30 ➀ CDL 10 001 R3014 0.10 50 15 1 30 0.130 65399 PS1/15/30 ➀ CDL 10 001 R3015 0.130 50 18 1 30 0.150 653305 PS1/18/30 ➀ CDL 10 001 R3018 0.150 50 19 1 30 0.160 65331 PS1/19/30 ➀ CDL 10 001 R3019 0.160 50 60 1 30 0.50 653596 PS1/60/30 CDL 10 001 R3060 0.50 0 1-phase busbars, connection of 1-pole devices with auxiliary, end caps PS-END 0 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 38 1 10 0.7 586139 PS1/38H CDL 10 001 R1038 0.7 30 38 1 16 0.45 586146 PS1/38/16H CDL 10 001 R1638 0.45 30 ➀ inclusive of end caps ➁ pre-cut pins 4/1 CDC00053D004 DIN-Rail components for rolling stock applications

1-phase busbars, connection of neutral (blue insulation), end caps END 1.1 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 8 1 10 0.4 69546 PS1/8N CDL 10 001 R108 0.14 50 8 1 16 0.3 69560 PS1/8/16N CDL 10 001 R168 0.0 50 57 1 10 0.4 57978 PS1/57NA ➁ CDL 10 011 R1057 0.14 50 57 1 10 0.4 69539 PS1/57N CDL 10 001 R1057 0.14 50 57 1 16 0.3 579735 PS1/57/16NA ➁ CDL 10 011 R1657 0.0 50 57 1 16 0.3 69553 PS1/57/16N CDL 10 001 R1657 0.0 50 4 1-phase busbars, connection of auxiliaries, end caps END 1.1 except PS 1/57/6 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 3 1 6 0.16 584739 PS1/3/6 CDL 10 005 R063 0.09 50 9 1 6 0.14 58083 PS1/9/6 CDL 10 005 R069 0.10 50 38 1 6 0.14 580816 PS1/38/6 CDL 10 005 R0638 0.09 50 57 1 6 0.11 585309 PS1/57/6 CDL 10 005 R0657 0.08 50 1-phase busbars, connection of hand operated neutral SC-Nt (blue insulation),end caps END 1.1 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 38 1 10 0.410 655361 PS1/38 NT CDL 10 00 R1038 10 -phase busbars, pin distance 17.6 mm, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 1 10 0.07 55651 PS/1 ➀ CDL 0 001 R101 0.08 50 1 10 0.07 584616 PS/1A ➀➁ CDL 0 010 R101 0.08 50 1 16 0.11 646918 PS/1/16 CDL 0 001 R161 0.09 50 58 10 0.3 55655 PS/58 CDL 0 001 R1058 0.36 10 58 16 0.55 556569 PS/58/16 CDL 0 001 R1658 0.49 10 58 16 0.55 584746 PS/58/16A ➁ CDL 0 010 R1658 0.49 10 58 30 1.81 6547 PS/58/30 ➂➃ CDL 0 001 R3058 1.81 10 Note: PS...A is a busbar with removable pin -phase busbars, connection of -pole devices with auxiliary, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 48 10 0.47 556538 PS/48H CDL 0 001 R1048 0.35 10 48 16 0.68 556545 PS/48/16H CDL 0 001 R1648 0.48 10 48 16 0.68 584630 PS/48/16HA ➁ CDL 0 01 R1648 0.48 10 ➀ inclusive of end caps ➁ pre-cut pins ➂ use end cap PS-END 3 ➃ removal of installed MCB not possible DIN-Rail components for rolling stock applications CDC00053D004 4/13

Busbars and accessories for MCBs S 00 series PS busbars 3-phase busbars, pin distance 17.6 mm, end caps PS-END No. of pins Phases mm Cu-No. 4016779 4 kg EAN Type code Order code 11 3 10 0.10 64996 PS3/11 ➀ CDL 30 001 R1011 0.08 50 1 3 10 0.09 576116 PS3/1 ➀ CDL 30 001 R101 0.09 50 1 3 10 0.09 584647 PS3/1A ➀➁ CDL 30 010 R101 0.09 50 1 3 16 0.16 56805 PS3/1/16➀ CDL 30 001 R161 0.1 50 60 3 10 0.51 514699 PS3/60 CDL 30 001 R1060 0.47 10 60 3 10 0.51 563758 PS3/60A ➁ CDL 30 010 R1060 0.47 10 60 3 16 0.76 514705 PS3/60/16 CDL 30 001 R1660 0.65 10 60 3 16 0.76 563765 PS3/60/16A ➁ CDL 30 010 R1660 0.65 10 60 3 30.65 65489 PS3/60/30 ➂➄ CDL 30 001 R3060.65 10 3-phase busbars, connection of 1-pole devices with auxiliary, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 39 3 10 0.51 556590 PS3/39H CDL 30 001 R1039 0.43 10 39 3 16 0.76 556606 PS3/39/16H CDL 30 001 R1639 0.60 10 3-phase busbars, connection of -pole devices (Phase+N) with auxiliary, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 4 3 10 0.80 556576 PS3/4H CDL 30 001 R104 0.41 10 3-phase busbars, connection of -pole devices (Phase+Phase) with auxiliary, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 46 3 16 0.98 66109 PS3/46/16H-IT CDL 30 001 R1646 0.98 10 3-phase busbars, connection of 3-pole devices with auxiliary, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 48 3 10 0.51 556613 PS3/48H CDL 30 001 R1048 0.43 10 48 3 16 0.76 556644 PS3/48/16H CDL 30 001 R1648 0.60 10 48 3 16 0.76 584654 PS3/48/16HA ➁ CDL 30 01 R1648 0.60 10 3-phase busbars, connection of 1+N or RCBOs, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 30 3 10 0.50 556583 PS3/30 CDL 30 001 R1030 0.4 10 ➀ inclusive of end caps ➁ pre-cut pins ➂ use end cap PS-END 3 ➃ use end cap PS-END 3.1 ➄ removal of installed MCB not possible 4/14 CDC00053D004 DIN-Rail components for rolling stock applications

3-phase busbars, N of the RCD omitted, end caps PS-END No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 9 3 10 0.10 517515 PS3/9FI ➀ CDL 30 00 R1009 0.06 50 10 3 10 0.10 5175 PS3/10FI ➀ CDL 30 00 R1010 0.07 50 1 3 10 0.11 571074 PS3/1FI ➀ CDL 30 00 R101 0.09 50 57 3 10 0.55 556651 PS3/57FI CDL 30 00 R1057 0.46 10 3-phase busbars, N of the RCD omitted, with auxiliary at RCD end caps PS-END No. of pins Phases mm Cu-No. 4016779 4 kg EAN Type code Order code 1 3 10 0.11 571081 PS3/1FIH ➀ CDL 30 003 R101 0.09 50 4-phase busbars, pin distance 17.6 mm, end caps PS-END 1 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 1 4 10 0.1 656054 PS4/1 ➀ CDL 40 101 R101 0.11 30 1 4 10 0.1 656061 PS4/1A ➀➁ CDL 40 110 R101 0.11 30 1 4 16 0.4 656078 PS4/1/16 ➀ CDL 40 101 R161 0.16 30 60 4 10 0.80 656085 PS4/60 CDL 40 101 R1060 0.64 10 60 4 16 1.1 65609 PS4/60/16 CDL 40 101 R1660 0.89 10 60 4 16 1.1 656108 PS4/60/16A ➁ CDL 40 110 R1660 0.89 10 60 4 30 3.37 65496 PS4/60/30 ➃➄ CDL 40 001 R3060 3.37 10 Note: PS...A is a busbar with removable pin 4-phase busbars, connection of 4-pole devices with auxiliary, end caps PS-END 1 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 5 4 16 1.30 656115 PS4/5/16H CDL 40 101 R165 0.78 10 5 4 16 1.30 6561 PS4/5/16HA ➁ CDL 40 1 R165 0.78 10 4-phase busbars, connection of 1+N or RCBOs, end caps PS-END 1 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 1 4 10 0.14 656139 PS4/1NA ➀➁ CDL 40 13 R101 0.10 30 58 4 10 0.80 656146 PS4/58N CDL 40 101 R1058 0.59 10 58 4 16 1.1 656153 PS4/58/16N CDL 40 101 R1658 0.77 10 58 4 16 1.1 6561 PS4/58/16NA ➁ CDL 40 13 R1658 0.77 10 ➀ inclusive of end caps ➁ pre-cut pins ➂ use end cap PS-END 3 ➃ use end cap PS-END 3.1 ➄ removal of installed MCB not possible DIN-Rail components for rolling stock applications CDC00053D004 4/15

Busbars and accessories for MCBs S 00 series PS busbars 4-phase busbars, connection of 1+N or RCBOs with auxiliary, end caps PS-END 1 No. of pins Phases mm Cu-No. 4016779 kg EAN Type code Order code 48 4 16 1.48 656160 PS4/48/16NHA ➀ CDL 40 114 R1648 0.76 10 4-phase busbars, connection of 4-pole RCD with 1+N, end caps PS-END 1 No. of pins Phases mm Cu-No. 4016779 4 kg EAN Type code Order code 58 4 10 0.80 656177 PS4/58NNA ➀ CDL 40 110 R1058 0.58 10 58 4 16 1.1 656184 PS4/58/16NNA ➀ CDL 40 110 R1658 0.80 10 ➀ pre-cut pins 4/16 CDC00053D004 DIN-Rail components for rolling stock applications

Auxiliary elements for MCBs S 80 UC series Selection table Combination between auxiliary elements and S 80 UC H 4 S/H S 80 S UR UR H S ST S/H S CDC09003F0014 H S UR ST Auxiliary contact Signal contact Undervoltage release Shunt trip DIN-Rail components for rolling stock applications CDC00053D004 4/17

Auxiliary elements for MCBs S 80 UC series Technical features 4 Shunt trips S-A1 S-A voltage V AC 1-60 V AC 110-415 V AC V DC 1-60 V DC 110-50 V DC Max. release duration ms <10 ms <10 ms Min. release voltage V AC 7 V AC 55 V AC V DC 10 V DC 80 V DC Consumption on release 1 V AC VA 35 VA 1 V DC VA 30 VA 4 V AC VA 140 VA 4 V DC VA 100 VA 48 V AC VA 600 VA 48 V DC VA 330 VA 110 V AC VA 40 VA 110 V DC VA 40 VA 0 V AC VA 180 VA 0 V DC VA 170 VA Coil resistance Ω 3.7 Ω 5 Ω Terminals mm 5 mm 5 mm Tightening torque Nm Nm Nm Dimens.(WxDxH) mm 17.5x68x90 mm 17.5x68x90 mm Undervoltage releases S-UA 1 S-UA 4 S-UA 48 S-UA 110 S-UA 0 S-UA 380 Standards VDE0660 part I - IEC EN 60947.1 voltage V AC - 4 V AC 48 V AC 110 V AC 0-40 V AC 380 V AC V DC 1 V DC 4 V DC - 110 V DC 0-40 V DC 380 V DC Frequency Hz 50...60 Hz Release trip V 0.35 U n V 0.7 U n Terminals mm x 1.5 mm Consumption ma 10 ma Resistance to corrosion C/RH const. climatic cond.: 3/83-40/93-55/0 C/RH; var. climatic cond.: 5/95-40/93 C/RH Protection degree IP0 Tightening torque Nm 0.4 Nm Dimensions (WxDxH) mm 17.5x68x90 mm 4/18 CDC00053D004 DIN-Rail components for rolling stock applications

Auxiliary and signal contacts S-H11 I S-H0 I S-H0 I S-H1 S-H1 S-H30 S-H03 S-H11 X S-H0 X S-H0 X Description 1NO+1NC NO NC NO+1NC 1NO+NC 3NO 3NC Alternating U e [V]/ I e [A] 40 V/6 A, 415 V/ A Direct U e [V]/ I e [A] 4 V/4 A, 60 V/ A, 110 V/1.5 A, 50 V/1 A Min.operating voltage V 1 V AC - 1 V DC Min. operating ma 1 ma Terminals mm up to x1.5 mm Dielectric strength kv 3 kv Resistance to short-circuit A 1000 A (protected with S breaker characteristic K - 6 A) at 40 V AC Impulse voltage withstand capacity kv 4 kv Tightening torque Nm 0.7 Nm Dimensions (WxDxH) mm 8.75x68x90 mm 4 Auxiliary and signal contacts S-S S-SH Description 1 change over change over Alternating U e [V]/ I e [A] 40 V/6 A, 415 V/ A Direct U e [V]/ I e [A] 50 V/0.5 A, 110 V/1 A, 60 V/1 A, 4 V/4 A Min.operating voltage V 1 V AC - 1 V DC Min. operating ma 1 ma Terminals mm up to x1.5 mm Dielectric strength kv 3 kv Resistance to short-circuit A 1000 A (protected with S breaker characteristic K - 6 A) at 40 V AC Impulse voltage withstand capacity kv 4 kv Tightening torque Nm 0.7 Nm Dimensions (WxDxH) mm 8.75x68x90 mm DIN-Rail components for rolling stock applications CDC00053D004 4/19

Auxiliary elements for MCB S 80 UC series CSC400495F001 Shunt trips Function: remote opening of the device when a voltage is applied 40133 EAN Type code Order code 1-60 VAC/VDC shunt trip 4930 1 S-A1 GH S80 1909 R0001 0.145 1 110-415 VAC and 110-50 VDC shunt trip 4940 0 S-A GH S80 1909 R000 0.145 1 4 Auxiliary contacts Function: indication of the position of the device s contacts Signal contacts Function: indication of the position of the device s contacts only after the automatic release of the MCBs and RCBOs due to an overload or a short-circuit 40133 EAN Type code Order code Auxiliary contact 1 NO + 1 NC (1/ module) 61500 1 S-H11 GH S70 1916 R0001 0.04 1 Auxiliary contact NO (1/ module) 61510 0 S-H0 GH S70 1916 R000 0.04 1 Auxiliary contact NC (1/ module) 6150 9 S-H0 GH S70 1916 R0003 0.04 1 Auxiliary contact 1 NO + 1 NC (1/ module) 61530 8 S-H11X GH S70 1917 R0001 0.04 1 with Faston connections Auxiliary contact NO (1/ module) with 61540 7 S-H0X GH S70 1917 R000 0.04 1 Faston connections Auxiliary contact NC (1/ module) with 61550 6 S-H0X GH S70 1917 R0003 0.04 1 Faston connections Auxiliary contact NO + 1 NC (1/ module) 01370 3* S-H1 GH S70 1936 R0001 0.05 1 Auxiliary contact 1 NO + NC (1/ module) 01380 * S-H1 GH S70 1936 R000 1 Auxiliary contact 3 NO (1/ module) 01390 1* S-H30 GH S70 1936 R0003 0.05 1 Auxiliary contact 3 NC (1/ module) 01400 7* S-H03 GH S70 1936 R0004 0.05 1 Signal contact (1/ module) 1770 7* S-S GH S80 190 R0008 0.07 1 Signal contact + Auxiliary contact (1/ 4900 4 S-S/H GH S80 1901 R0008 0.05 1 module) * 4016779 CSC400499F001 CSC400498F001 CSC400497F001 4/0 CDC00053D004 DIN-Rail components for rolling stock applications

CSC400503F001 Undervoltage releases Function: protection of the load in the event of a voltage drop (between 70% and 35% of its rated value); positive safety (device s tripping when the voltage is disconnected) emergency stop by means of a button. voltage* 40133 V AC, V DC EAN Type code Order code 1V DC 4970 7 S-UA 1 GH S80 1911 R0001 0.09 1 4V AC/DC 4980 6 S-UA 4 GH S80 1911 R000 0.09 1 48V AC/DC 79360 0 S-UA 48 GH S80 1911 R0003 0.09 1 110V AC/DC 43000 0 S-UA 110 GH S80 1911 R0004 0.09 1 0V AC/DC 43010 9 S-UA 0 GH S80 1911 R0005 0.09 1 380V AC 79370 9 S-UA 380 GH S80 1911 R0006 0.09 1 * 1 module 4 DIN-Rail components for rolling stock applications CDC00053D004 4/1

Auxiliary elements for MCBs S800 S series Selection table Combination between auxiliary elements and S800 S 4 H or S/H H S/H S800 DDA 800 H or S/H H ST or UR S/H H S/H UR ST Auxiliary contact Signal/Auxiliary contact Undervoltage release Shunt trip 4/ CDC00053D004 DIN-Rail components for rolling stock applications

Auxiliary elements for S800 S Remote switch S800-RSU-H Operating voltage [V] 4 DC Current consumption I rms [A],5 Stand-by [ma] < 50 Switching time OFF-ON [ms] < 500 Switching time ON-OFF [ms] < 50 Ambient operation temperature [ C] -5 +70 Switching cycles over lifetime 10000 Standard IEC 60947- Annex N Protection IP0 [g] 300 Connection 10 pole Micro Fit 3,0 4 Short circuit limiter S803S-SCL Max. rated continuous [A] 3, 63, 15 Poles 3 operating voltage U e (AC) 50/60Hz [V] 400/690 insulation voltage U i [V] 690 impulse withstand voltage U imp [kw] 8 Ultimate short-circuit breaking 400VAC [ka] 100 capacity Icu in accordance with 440VAC [ka] 100 IEC 60947-690VAC [ka] 50 Valid combination see: http://www.abb.com/product Low Voltage Products and Systems/Modular DIN-Rail Products/High Performance Circuit Breakers HPCBs/Software Service short-circuit breaking capacity I cs in 100% I cu accordance with IEC 60947- frequency [Hz] 50/60 Mounting position any Disconnector properties according to IEC yes 60947- Standard IEC 60947- Connection Cu [mm ] 1...5 strand 1...35 cable Connection Cu > 3 A [mm ] 6...50 strand 6...70 cable Tightening torque [Nm] min. 3/max. 4 Supply any Mounting on DIN top hat rail EN 60715 Permissible ambient temperature for [ C] -5...+60 operations Storage temperature [ C] -40...+70 Type of protection IP0 IP40 (only actuation side) Classification in accordance with NF-16-101, I3F NF16-10 Resistance to vibration IEC 60068--7; IEC 60068-; EN 61373 Cat.1/class B DIN-Rail components for rolling stock applications CDC00053D004 4/3

Auxiliary elements for S800 S Internal resistance R i Power loss P v [A] [mω] [W] 3 1.7 1.7 63 1.0 4.0 15 0.6 9.4 4 Auxiliary contact S800-AUX Utilization category AC15 400/A AC15 40/6A DC13 50/0.55A DC13 15V/1.1A DC13 60V/A DC13 4V/4A Continuous thermal [A] 6 insulation voltage U i [V] 690 of contacts impulse withstand voltage U imp [kv] 6 Pollution degree 3 Function of contact Changeover contacts Connection Cu [mm ] 1 x.5 x 1.5 Tightening torque [Nm] 1 AC/DC supply any Mounting on DIN top hat rail EN 60715 Type of protection IP0 Permissible ambient temperature for [ C] -5...+60 operations Storage temperature [ C] -40...+70 Mech. device service life 6000 switching cycles I cu with S450E [A] 1000 Resistance to vibration IEC 60068--6; EN 61373 Cat.1/class B 5g, 0 frequency cycle 5...150...5Hz at 4V AC/DC, 5mA brief interrupt <10ms 4/4 CDC00053D004 DIN-Rail components for rolling stock applications

Combined auxiliary and signal contact S800 AUX/ALT Utilization category AC15 400/A AC15 40/6A DC13 50/0.55A DC13 15V/1.1A DC13 60V/A DC13 4V/4A Continuous thermal [A] 6 insulation voltage U i [[A]] 690 of contacts (1x AUX, 1 x AUX/ALT) impulse withstand voltage U imp [kv] 6 Pollution degree 3 Function of contact Changeover contacts Connection Cu [mm ] 1 x.5 x 1.5 Tightening torque [Nm] 1 AC/DC supply any Mounting on DIN top hat rail EN 60715 Type of protection IP0 Permissible ambient temperature for [ C] -5...+60 operations Storage temperature [ C] -40...+70 Mech. device service life 6000 switching cycles I cu with S450E [A] 1000 Resistance to vibration IEC 60068-; EN 61373 Cat.1/class B 5g, 0 frequency cycle 5...150...5Hz at 4V AC/DC, 5mA brief interrupt <10ms 4 DIN-Rail components for rolling stock applications CDC00053D004 4/5

Auxiliary elements for S800 S 4 Shunt Operation Release S800-SOR S800-SOR4 S800-SOR130 S800-SOR50 S800-SOR400 voltage U e [V AC/DC] 4 48...130 110...50 0...400/50 a Operating range [%] U e 70...110 insulation voltage U i [V] 690 Coil pull in consumption [W/VA] 1.6/17 a 41.9...307.3 3...119 45...148.1 4...310 a 0...105 a frequency [Hz] DC; 50/60 Pollution degree 3 Connection Cu [mm ] 1...5 strand 1...35 cable Tightening torque [Nm] min.3/ max.4 AC/DC supply any DIN top hat rail EN 60715 Type of protection IP0 IP40 (only actuation side) Permissible ambient temperature of operations [ C] -5...+60 Storage temperature [ C] -40...+70 Resistance to vibration IEC 60068--6; EN61373 Cat.1/class B a according to UL 489 Undervoltage Release S800-UVR S800-UVR36 S800-UVR60 S800-UVR130 S800-UVR50 voltage U e [V AC/DC] 4...36 48...60 110...130 0...50 Operating range Operating opening [%] U e 35...70 Operating closing [%] U e 85 insulation voltage U i [V] 690 Coil pull in consumption [W/VA] 1.1...1.14/1. 1.14...1.5/1.3 a 1.3...1.41/1.4 a 1.71...1.91/1.9 a frequency [Hz] DC; 50/60 Pollution degree 3 Standard IEC 60947-5-1, UL 489 Connection Cu [mm ] 1...5 strand 1...35 cable Tightening torque [Nm] min.3/ max.4 AC/DC supply any DIN top hat rail EN 60715 Type of protection IP0 IP40 (only actuation side) Permissible ambient temperature of operations [ C] -5...+60 Storage temperature [ C] -40...+70 Resistance to vibration IEC 60068--6; EN61373 Cat.1/class B a according to UL 489 4/6 CDC00053D004 DIN-Rail components for rolling stock applications

Busbar S803-BB50 Max. rated continuous Side supply [A] 15 Central supply [A] 50 Conditional short circuit I p [ka eff] 100 protected by T max Poles 3 operating voltage U e (AC) [V] 400/690 50/60Hz insulation voltage U i [V] 690 impulse withstand voltage U imp [kv] 8 frequency [Hz] 50 Standards EN 60439-:000 Material of the bars E-Cu 58 half-hard rolled F5 Material of the insulation profile Cycoloy C 3600; UL94 V-0 at 1,5 mm Material of the end caps Polyamide PA66+PA6; UL94 V-0 at 0.4mm Free of halogen and phosphorus Busbar cross-sections [mm ] 60 Overvoltage category III Pollution degree 4 Busbar Power Connector S803-BBPC10 Max. rated continuous [A] 50 Poles 3 operating voltage U e [V] 400/690 frequency [Hz] 50 Standards EN 60439-:000 Material of the terminals CuZn39Pb; material no.:.0380 Casing material Polyamide PA66+PA6; UL94 V-0 at 0,4mm Free of halogen and phosphorus Tightening torque At supply end [Nm] 19 At busbar end [Nm] 3 Connection cross-section [mm ] 1,.6...10 Pollution degree DIN-Rail components for rolling stock applications CDC00053D004 4/7

Accessories for S800 Auxiliary contact Description 76171 CCC413069F0001 EAN Type code Order code Auxiliary contact 0680 S800-AUX CCS800900R0011 0.049 1 Combined auxiliary and signal contact Description 76171 4 EAN Type code Order code Auxiliary/signal contact 06819 S800-AUX/ALT CCS800900R001 0.050 1 CCC413070F0001 Separating neutral Description 76171 EAN Type code Order code Separating neutral 63A 08196 S800-NT CCS800900R0061 0.115 1 CCC413067F0001 Shunt operation releases Description 76171 EAN Type code Order code VAC/DC 1070 S800-SOR1 CCS800900R0191 0.15 1 4VAC/DC 08318 S800-SOR4 CCS800900R0191 0.15 1 48...130VAC/DC 08349 S800-SOR130 CCS800900R01 0.15 1 110...50VAC/DC 0833 S800-SOR50 CCS800900R011 0.15 1 0...400VAC/DC 08356 S800-SOR400 CCS800900R031 0.15 1 CCC41339F Under voltage releases Description 76171 EAN Type code Order code 4...36VAC/DC 08363 S800-UVR36 CCS800900R041 0.15 1 48...60VAC/DC 08370 S800-UVR60 CCS800900R051 0.15 1 110...130VAC/DC 08387 S800-UVR130 CCS800900R061 0.15 1 0...50VAC/DC 08394 S800-UVR50 CCS800900R071 0.15 1 Remote switching Description 76171 CCC41340F EAN Type code Order code Remote switching 41144 S800-RSU-H CCS800900R0501 0.300 1 CSC40005F00 breaker is not included 4/8 CDC00053D004 DIN-Rail components for rolling stock applications

Cable and Micro Fit Description 76171 CCC413357F000 EAN Type code Order code S800-RSU cable with plug 41869 S800-RSU-CP CCS800900R0541 0.35 1 10-pole Micro Fit 3.0 plug 41845 S800-RSU-P CCS800900R0551 0.35 1 CCC413019F000 Short-circuit limiters with cage terminal Description 76171 A EAN Type code Order code 3 0891 S803S-SCL3 CCS800900R091 0.735 1 63 0899 S803S-SCL63 CCS800900R0301 0.735 1 15 08905 S803S-SCL15 CCS800900R081 0.735 1 4 Short-circuit limiters with ring terminal cable connection Description 76171 CCC41300F0001 A EAN Type code Order code 3 408916 S803S-SCL3-R CCS800900R033 0.735 1 63 08950 S803S-SCL63-R CCS800900R0331 0.735 1 15 08936 S803S-SCL15-R CCS800900R0311 0.735 1 Self-resetting short-circuit limiter IEC version Description 76171 CCC413363F0001 A EAN Type code Order code 3 4101 S801S-SCL3-SR CCS801901R0539 0.5 1 63 41036 S801S-SCL63-SR CCS801901R0599 0.5 1 100 41199 S801S-SCL100-SR CCS801901R0639 0.5 1 3 41074 S80S-SCL3-SR CCS801901R0539 0.5 1 63 41098 S80S-SCL63-SR CCS801901R0599 0.5 1 100 41050 S80S-SCL100-SR CCS801901R0639 0.5 1 3 411930 S803S-SCL3-SR CCS803901R0539 0.75 1 63 411947 S803S-SCL63-SR CCS803901R0599 0.75 1 100 411954 S803S-SCL100-SR CCS803901R0639 0.75 1 CCC413378F0001 Self-resetting short-circuit limiter World version Description 76171 A EAN Type code Order code 3 41319 S803W-SCL3-SR CCS803917R0539 0.75 1 63 4136 S803W-SCL63-SR CCS803917R0599 0.75 1 100 4130 S803W-SCL100-SR CCS803917R0639 0.75 1 Busbar Description 76171 EAN Type code Order code Busbar 50 A 0888 S803-BB50 CCS800900R0071 1.5 1 DIN-Rail components for rolling stock applications CDC00053D004 4/9

Auxiliary elements for MCBs S500 UC series Selection table Combination between auxiliary elements and S500 UC 4 H or S/H H S/H S800 S500 UC DDA 800 H S/H H S/H UA UA ST or UR Auxiliary contact Signal/Auxiliary contact Undervoltage release 4/30 CDC00053D004 DIN-Rail components for rolling stock applications

Auxiliary elements for MCBs S500 UC Auxiliary elements and accessories for S500 UC 5008681 Auxiliary contact Description 76171 EAN Type code Order code 1 NO and 1 NC contact 0305506 S500-H11 CCF008681R0001 0.06 1 NO contacts 0305513 S500-H0 CCF00868R0001 0.06 1 Signal contact Description 76171 4 5008684 EAN Type code Order code 1 NO and 1 NC contact 0305537 S500-S11 CCF008684R0001 0.06 1 NO contacts 0305544 S500-S0 CCF008685R0001 0.06 1 S500-RSU-H breaker is not included CSC40005F00 Undervoltage release UA* Description *Cannot be ordered individually. To be ordered together with S500 UC to assemble at the factory Type code Order code* + UA 1VAC 0.16 1 + UA 4VAC 0.16 1 + UA 36VAC 0.16 1 + UA 48VAC 0.16 1 + UA 110VAC 0.16 1 + UA 30VAC 0.16 1 + UA 400VAC 0.16 1 + UA 500VAC 0.16 1 + UA 1 V DC 0.16 1 + UA 4 V DC 0.16 1 + UA 36 V DC 0.16 1 + UA 48 V DC 0.16 1 + UA 110 V DC 0.16 1 + UA 30 V DC 0.16 1 + UA 400 V DC 0.16 1 + UA 500 V DC 0.16 1 Remote switch Description 76171 EAN Type code Order code Remote switch 1407780 S500-RSU-H CCF017987R0001 0.3 1 DIN-Rail components for rolling stock applications CDC00053D004 4/31

4 4/3 CDC00053D004 DIN-Rail components for rolling stock applications

DIN-Rail components for rolling stock applications Technical details Tripping characteristics Limitation of specific let through energy I²t 6 Internal resistance and power loss 11 Performances at different ambient temperatures 14 Derating 15 Influence of adjacent devices 17 5 DIN-Rail components for rolling stock applications CDC00053D004 5/1

MCBs technical details Tripping characteristics Tripping characteristics S00 MCBs series 5 Thermal release Electromagnetic release Acc. to Tripping characteristic Current: Tripping time Currents: Tripping time and rated conventional non-tripping conventional tripping hold trip at least at surges IEC/EN 60898-1 B 6 to 63 A 1.13 l n > 1 h 3 l n > 0.1 s 1.45 In < 1 h 5 l n < 0.1 s C 0.5 to 63 A 1.13 l n > 1 h 5 l n > 0.1 s 1.45 In < 1 h 10 l n < 0.1 s D 0.5 to 63 A 1.13 l n > 1 h 10 l n > 0.1 s 1.45 In < 1 h 0 l n < 0.1 s IEC/EN 60947- K 0. to 63 A 1.05 l n > 1 h 10 l n > 0. s 1. In < 1 h 14 l n < 0. s 1.5 In < min. 6.0 In > s (T1) Z 0.5 to 63 A 1.05 l n > 1 h l n > 0. s 1. In < 1 h 3 l n < 0. s The indicated electromagnetic tripping values apply to a frequency range of 16 /3... 60 Hz. For different network frequencies or direct the values change according to the multiplier in the table below (see also page 11/75) The thermal releases are calibrated to a nominal reference ambient temperature; for Z and K, the value is 0 C, for B and C = 30 C. In the case of higher ambient temperatures, the values fall by ca. 6 % for each 10 K temperature rise. As from operating temperature (after I 1 > 1 h or, as applicable, h). AC DC 100 Hz 00 Hz 400 Hz Multiplier 1.1 1. 1.5 1.5 The thermal tripping performance is independent from the network frequency 5/ CDC00053D004 DIN-Rail components for rolling stock applications

Tripping characteristic S800 S series Acc. to Tripping characteristic and rated Thermal release Electromagnetic release a Current Tripping time Current Tripping time conventional conventional hold surges trip at least at non-tripping tripping IEC/EN 60898-1 B 10 to 80 A 1.13 l n > 1 h 3 l n > 0.1 s 1.45 l n < 1 h 5 l n < 0.1 s C 10 to 80 A 1.13 l n > 1 h 5 l n > 0.1 s 1.45 l n < 1 h 10 l n < 0.1 s IEC/EN 60947- B 6 to 15 A 1.05 l n > 1 h 3. l n > 0.1 s 1.3 l n < 1 h 4.8 l n < 0.1 s C 6 to 15 A 1.05 l n > 1 h 6.4 l n > 0.1 s 1.3 l n < 1 h 9.6 l n < 0.1 s K 6 to 15 A 1.05 l n > 1 h 10.4 l n > 0.1 s 1. l n < 1 h 15.6 l n < 0.1 s UCB (DC only) 10 to 15 A 1.05 l n > 1 h 4.8 l n > 0.1 s 1.3 l n < 1 h 7. l n < 0.1 s UCK (DC only) 10 to 15 A 1.05 l n > 1 h 8.8 l n > 0.1 s 1. l n < 1 h 13. l n < 0.1 s 5 The indicated electromagnetic tripping values apply to a frequency of 50/60 Hz. The thermal release are calibrated to a nominal reference ambient temperature; for B, C, D, UCB and PVS it is 30 C, for K, UCK it is 0 C for Z, K and UCZ it is 5 C. Tripping characteristic S500 UC Acc. to IEC/EN 60947- Tripping characteristic and rated Thermal release Electromagnetic release a Current Tripping time Current Tripping time conventional conventional hold trip at least at non-tripping tripping of device surges UC-K (DC only) 0.1 to 45 A 1.05 l n > 1 h < 0.1 A 8 l n > 0.1 s 1. l n < 1 h 10 l n < 0.1 s < 0.4 A 10 l n > 0.1 s 1 l n < 0.1 s > 0.38 A 1 l n > 0.1 s 14 l n < 0.1 s The indicated electromagnetic tripping values apply to a frequency of 50/60 Hz. b The thermal release are calibrated to a nominal reference ambient temperature is 0 C. DIN-Rail components for rolling stock applications CDC00053D004 5/3

MCBs technical details Tripping characteristics S00 MCBs, S800S MCBs and DS01 T RCBO Tripping characteristic for S00 MCBs series and DS01 T RCBO Characteristic B IEC-EN60898 Characteristic C IEC-EN60898 Characteristic D IEC-EN60898 Tripping curve Tripping curve from cold from statecold state Tripping curve Tripping curve from cold from statecold state Tripping curve Tripping curve from cold from statecold state 5 Seconds Seconds Seconds Seconds Seconds Seconds Minutes Minutes Minutes Minutes Minutes Minutes Multiples Multiples of rated of rated CSC400400F00 Multiples Multiples of rated of rated CSC400400F00 Multiples Multiples of rated of rated CSC400401F00 Characteristic K IEC-EN60947- Characteristic Z IEC-EN60947- Tripping Tripping curve curve from from cold cold state state Tripping Tripping curve curve from from cold cold state state Seconds Seconds Seconds Seconds Minutes Minutes Minutes Minutes Multiples Multiples of rated of rated CSC400400F00 Multiples Multiples of rated of rated CSC400400F00 a thermal trip b electromagnetic trip 5/4 CDC00053D004 DIN-Rail components for rolling stock applications

Tripping characteristic for S800S UC MCBs series Characteristic UCB IEC/EN 60947-10 000 Characteristic UCK IEC/EN 60947-10 000 1000 1000 Tripping time in s 100 10 1 UCB Tripping time in s 100 10 1 UCK UCK 5 0.1 0.01 1 4 7 10 030 CCC413005Z000 CCC413005Z0001 0.1 0.01 1 4 7 10 030 CCC413006Z0001 CCC413006Z0001 Multiple of the rated Multiple of the rated Tripping characteristic for S500S UC MCBs series Characteristic K adjustable IEC/EN 60947-10 000 1000 100 Tripping time in s 10 1 0,1 0,01 0.1 # 0.1 A 0. # 0.4 A 0.38 # 45 A 0,00 1 3 5 10 0 30 CCC41018Z0001 Multiple of the rated DIN-Rail components for rolling stock applications CDC00053D004 5/5

MCBs technical details Technical details Limitation of specific let-through energy I t Limitation Technical of specific details let-through energy I²t All contents in the page come from System Pro M 014 catalogue (code All contents CSC40000D011), in the page come page from 764 System Pro M 014 catalogue I t diagrams - Specific I t It Limitation diagrams - Specific of specific let-through let-through energy value It energy I²t (code CSC40000D011), page The I t curves give the values of the specific let-through energy The expressed It curves in Agive s (A=amps; the values s=seconds) of the specific in relation let-through to the per-energspective the diagrams perspective short-circuit - Specific short-circuit let-through (Irms) in energy ka. (Irms) value in It ka. expressed in As (A=amps; 764 s=seconds) in relation to It The It curves give the values of the specific let-through energy expressed in As (A=amps; s=seconds) in relation to S00 the S 00 MCBs perspective MT and series, short-circuit S 00 characteristic P, characteristics B and (Irms) B C in ka. and C 30/400 V let-through energy S00 MCBs series, characteristic B and C 30/400 V let-through energy 5 S00 MCBs series, characteristic D and K 30/400 V let-through energy S00 S 00 MCBs MT series, and S 00 characteristic P, characteristics D and K D-K 30/400 V V let-through energy 5/6 CDC00053D004 DIN-Rail components for rolling stock applications

Contents come from System Pro M 014 catalogue (code CSC40000D011), page 765 S00 MCBs series, characteristic Z 30/400 V let-through energy S 00 MT and S 00 P, characteristic Z 30/400 V let-through energy 5 S80 UC characteristic K 30/400 V let-through energy S80 UC characteristic Z 30/400 V let-through energy S 80 UC characteristic K 30/400 V let-through energy S 80 UC characteristic Z 30/400 V let-through energy SK 0157 Z 94 Contents come from Miniature Circuit- Breakers for Railway Applications (code CDC00053D001), page 51 DIN-Rail components for rolling stock applications CDC00053D004 5/7 SK 0158 Z 94

MCBs technical details Limitation of specific let-through energy I t S800 S characteristics B, C, D and K 30 V let-through energy 5 Let-through energy I t [A s] 10 5 10 4 63 A 80 A Sine-shaped half-wave 160 A 15 A 100 A 1 00 A 15 A 80 A 50 A 3 A 0 A 13 A 30 VAC/50 Hz 60 CCC41304Z0001 10 50 Prospective short-circuit Icc [ka] Let-through energy I t [A s] 10 5 10 4 80 A Sine-shaped half-wave 63 A 15 A 100 A 160 A 00 A 100 A 63 A 40 A 5 A 16 A 10 A 30 VAC/50 Hz 60 CCC41305Z0001 a Min. pre-arching I t, e.g. NH80 A gl/gg b Max. let-through I t, e.g. S801S-C0 10 50 Prospective short-circuit Icc [ka] 5/8 CDC00053D004 DIN-Rail components for rolling stock applications

S800 S characteristics B, C, D and K 400 V let-through energy Let-through energy I t [A s] 10 5 10 4 63 A 80 A Sine-shaped half-wave 160 A 15 A 100 A 1 00 A 15 A 80 A 50 A 3 A 0 A 13 A 5 400 VAC/50 Hz 60 CCC41304Z0001 10 50 Prospective short-circuit Icc [ka] Let-through energy I t [A s] 10 5 10 4 80 A Sine-shaped half-wave 63 A 15 A 100 A 160 A 00 A 100 A 63 A 40 A 5 A 16 A 10 A 400 VAC/50 Hz 60 CCC41305Z0001 a Min. pre-arching I t, e.g. NH80 A gl/gg b Max. let-through I t, e.g. S801S-C0 10 50 Prospective short-circuit Icc [ka] DIN-Rail components for rolling stock applications CDC00053D004 5/9

MCBs technical details Limitation of specific let-through energy I t DS01 T, characteristic B and C 30 V let-through energy 5 CSC40041F00 DS01 T 5/10 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs technical details Internal resistance and power loss S 00 MT Internal resistance per pole in mω, power loss per pole in W Internal resistance Power loss Internal resistance Power loss Internal resistance Power loss Internal resistance mω W mω W mω W mω W A B, C D K Z 0.5 5500 1.4 4300 1.1 4300 1.1 8100.4 1 1440 1.4 150 1.5 150 1.5 100.3 1.6 630 1.6 600 1.5 600 1.5 1000.8 460 1.8 410 1.65 410 1.65 619.5 3 150 1.3 130 1. 130 1. 35.4 4 110 1.8 105 1.7 105 1.7 149.4 6 55.0 5 1.9 5 1.9 75 3. 8 3 1.5 4 1.5 4 1.5 7.0 10 19.1 16 1.6 13.5 1.4 4.7 13 14.3 14. 13.5 1.4 16 8.5.5 8.5.5 7.7.0 10.9.8 0 6.5.5 6.1.3 6.7.7 6.0.4 5 5.0 3. 4.3 3.1 4.6.9 4.5 3.3 3 3.6 3.7 3.5 3.6 3.5 3.6 3.5 3.6 40 3.0 4.8. 4..8 4.5.5 4.1 50 1.3 3.5 1.5.9 1.5 3.1 1.5 4.1 63 1. 4.8 1. 4.8 1.0 4.4 1.3 5. Power loss 5 Current intensities 0.5 4 apply exclusively to C-type trip characteristics. S 00 P Internal resistance per pole in mω, power loss per pole in W Internal resistance Power loss Internal resistance Power loss Internal resistance Power loss mω W mω W mω W A B K Z 0.3 0000 1.8 0.5 6340 1.6 10100.5 0.75 500 1.4 1 1400 1.4 70.3 1.6 65 1.6 1100.8 460 1.8 619.5 3 11 1.9 11 1.9 4 163.6 163.6 6 61. 67.4 104 3.7 8 45.9 45.9 55 3.5 10 14 1.4 19 1.9 1.1 13 13.3.3 16 9.7.5 8..1 10.9.8 0 7.3.9 7.3.9 7.3.9 5 5.6 3.5 5.6 3.5 5.6 3.5 3 4.1 4. 4.1 4. 4.1 4. 40 4.0 6.4 4.0 6.4 4.0 6.4 50 1. 3.0 1. 3.0 1.8 4.4 63 1.4 5.6 1.3 5. 1.3 5. DIN-Rail components for rolling stock applications CDC00053D004 5/11

MCBs technical details Internal resistance and power loss 5 S 80 UC Internal resistance per pole in mω, power loss per pole in W Internal resistance Power loss Internal resistance Power loss Internal resistance Power loss mω W mω W mω W A B K Z 0. 33300 1.33 0.3 19700 1.77 0.5 500 1.6 10100.5 0.75 400 1.35 1 1390 1.39 70.7 1.6 61 1.56 1100.81 450 1.79 619.47 3 147 1.3 0 1.8 4 11 1.79 149.38 6 55.0 54.1 1.95 104 3.74 8 33.8.16 53.9 3.45 10 13.5 1.35 15.1 1.51 17.5 1.75 16 9.7.5 8.1.07 10.9.80 0 6.5.5 5.7.11 6.0.40 5 3.0 1.9 3.97.48 4.1.56 3.65.71.81.88 40.44 3.90.55 4.09 50 1.15.90 1.77 4.43 63 0.7 5.0 1.31 5.0 S 800 S Typical internal resistances and power losses at 5 C ambient temperature (per pole) Internal resistance R i Power loss P v mω W A B, C, D, K a) KM b) UCB, UCK b) B, C, D, K KM b) UCB, UCK b) 6 51.7 1.8 8 7. 1.7 10 15. 15. 1.5 1.5 13 1.1 1.1.0.0 16 1.1 1.1 3.1 3.1 0 8.7.7 8.7 3.5 1.1 3.5 5 6.8 3.0 6.8 4.3 1.9 4.3 3 3.1 1.7 3.1 3. 1.7 3. 40.3 1.6.3 3.7.6 3.7 50 1.7 1.1 1.7 4.3.8 4.3 63 1.6 1.0 1.6 6.4 4.0 6.4 80 1.0 0.75 1.0 6.4 5.0 6.4 100 0.8 0.8 8.0 8.0 15 0.6 0.6 9.4 9.4 a) K Applicable only for S800S-S800C b) KM, UCB, UCK Applicable only for S800S 5/1 CDC00053D004 DIN-Rail components for rolling stock applications

S 500 UC-K Internal resistance Ri Power loss Pv [mω] [W] 84 1.89 51.5 5.5.30 1.8.6 7.0.35 3.6.30.04.47 1.08.43 0.68 3.0 0.35 3.15 0.175 3.09 0.095 3.0 0.055 3.5 0.035 4.4 0.03 5.18 0.01 4.80 0.008 5.41 0.005 5.1 0.0035 4.79 0.005 4.0 0.0017 3.44 5 DS 01 T Internal resistance Ri Power loss Pv [A] [mω] [W] 1 1.0 1011 1.6 411 4.0 155 6 4.4 13.4 8 1.5 3.1 10.3 3.1 13. 13.3 16 3.4 13.3 0 4.4 11.1 5 3.9 6. 3 5.9 5.8 40 8.6 5.4 DIN-Rail components for rolling stock applications CDC00053D004 5/13

MCBs technical details Performances at different ambient temperatures Derating tables at different temperatures for S 00 MT/S 00 P and S 80 UC MCBs The rated value of the of a miniature circuit-breaker refers to a temperature of 0 C for circuit-breakers with characteristics K and Z and 30 C for characteristics B, C and D. The following tables contain the derating of load capability of S00 MT/S00 P and S80 UC MCBs with temperature from -40 C to 70 C for the curves B, C, D and K, Z. 5 S 00 MCBs and S 80 UC (B, C and D characteristic) B, C and D Ambient temperature T ( C) (A) - 40-30 - 0-10 0 10 0 30 40 50 60 70 0.5 0.67 0.65 0.6 0.60 0.58 0.55 0.53 0.50 0.47 0.44 0.41 0.37 1.0 1.33 1.9 1.5 1.0 1.15 1.11 1.05 1.00 0.94 0.88 0.8 0.75 1.6.13.07.00 1.9 1.85 1.77 1.69 1.60 1.51 1.41 1.31 1.19.0.67.58.49.40.31.1.11.00 1.89 1.76 1.63 1.49 3.0 4.0 3.9 3.7 3.6 3.5 3.3 3. 3.0.8.6.4. 4.0 5.3 5. 5.0 4.8 4.6 4.4 4. 4.0 3.8 3.5 3.3 3.0 6.0 8.0 7.7 7.5 7. 6.9 6.6 6.3 6.0 5.7 5.3 4.9 4.5 8.0 10.7 10.3 10.0 9.6 9. 8.8 8.4 8.0 7.5 7.1 6.5 6.0 10.0 13.3 1.9 1.5 1.0 11.5 11.1 10.5 10.0 9.4 8.8 8. 7.5 13.0 17.3 16.8 16. 15.6 15.0 14.4 13.7 13.0 1.3 11.5 10.6 9.7 16.0 1.3 0.7 0.0 19. 18.5 17.7 16.9 16.0 15.1 14.1 13.1 11.9 0.0 6.7 5.8 4.9 4.0 3.1.1 1.1 0.0 18.9 17.6 16.3 14.9 5.0 33.3 3.3 31. 30.0 8.9 7.6 6.4 5.0 3.6.0 0.4 18.6 3.0 4.7 41.3 39.9 38.5 37.0 35.4 33.7 3.0 30. 8. 6.1 3.9 40.0 53.3 51.6 49.9 48.1 46. 44. 4. 40.0 37.7 35.3 3.7 9.8 50.0 66.7 64.5 6.4 60.1 57.7 55.3 5.7 50.0 47.1 44.1 40.8 37.3 63.0 84.0 81.3 78.6 75.7 7.7 69.6 66.4 63.0 59.4 55.6 51.4 47.0 80.0 11.6 107. 10.1 97. 9.6 88. 84.0 80.0 76.0 7. 68.6 65. 100.0 140.7 134.0 17.6 11.6 115.8 110.3 105.0 100.0 95.0 90.3 85.7 81.5 15.0 175.9 167.5 159.5 151.9 144.7 137.8 131.3 15.0 118.8 11.8 107. 101.8 S 00 MCBs series and S 80 UC (K and Z characteristic) K and Z Ambient temperature T ( C) (A) - 40-30 - 0-10 0 10 0 30 40 50 60 70 0.5 0.66 0.64 0.61 0.59 0.56 0.53 0.50 0.47 0.43 0.40 0.35 0.31 1.0 1.3 1.7 1. 1.17 1.1 1.06 1.00 0.94 0.87 0.79 0.71 0.61 1.6.1.04 1.96 1.88 1.79 1.70 1.60 1.50 1.39 1.6 1.13 0.98.0.65.55.45.35.4.1.00 1.87 1.73 1.58 1.41 1. 3.0 4.0 3.8 3.7 3.5 3.4 3. 3.0.8.6.4.1 1.8 4.0 5.3 5.1 4.9 4.7 4.5 4. 4.0 3.7 3.5 3..8.4 6.0 7.9 7.6 7.3 7.0 6.7 6.4 6.0 5.6 5. 4.7 4. 3.7 8.0 10.8 10. 9.8 9.4 8.9 8.5 8.0 7.5 6.9 6.3 5.7 4.9 10.0 13. 1.7 1. 11.7 11. 10.6 10.0 9.4 8.7 7.9 7.1 6.1 13.0 17. 16.6 15.9 15. 14.5 13.8 13.0 1. 11.3 10.3 9. 8.0 16.0 1. 0.4 19.6 18.8 17.9 17.0 16.0 15.0 13.9 1.6 11.3 9.8 0.0 6.5 5.5 4.5 3.5.4 1. 0.0 18.7 17.3 15.8 14.1 1. 5.0 33.1 31.9 30.6 9.3 8.0 6.5 5.0 3.4 1.7 19.8 17.7 15.3 3.0 4.3 40.8 39. 37.5 35.8 33.9 3.0 9.9 7.7 5.3.6 19.6 40.0 5.9 51.0 49.0 46.9 44.7 4.4 40.0 37.4 34.6 31.6 8.3 4.5 50.0 66.1 63.7 61. 58.6 55.9 53.0 50.0 46.8 43.3 39.5 35.4 30.6 63.0 83.3 80.3 77. 73.9 70.4 66.8 63.0 58.9 54.6 49.8 44.5 38.6 5/14 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs technical details Derating Derating table at different temperatures for S 800 S MCBs: The rated value of the of the S 800 S refers to a calibration temperature of 30 C for characteristics B, C while, for characteristics K and UCK, it refers to 40 C. S 800 S (B, C and UCB characteristic) B, C, Ambient temperature ( C) UCB [A] 5 0 15 10 5 0 5 10 15 0 5 30 35 40 45 50 55 60 65 70 75 6 7. 7.1 7.0 6.9 6.8 6.7 6.6 6.4 6.3 6. 6.1 6.0 5.9 5.8 5.7 5.6 5.4 5.3 5. 5.1 5.0 8 9.6 9.5 9.3 9. 9.0 8.9 8.7 8.6 8.4 8.3 8.1 8.0 7.9 7.7 7.6 7.4 7.3 7.1 7.0 6.8 6.7 10 1.0 11.8 11.7 11.5 11.3 11.1 10.9 10.7 10.6 10.4 10. 10.0 9.8 9.6 9.4 9.3 9.1 8.9 8.7 8.5 8.3 13 15.6 15.4 15.1 14.9 14.7 14.4 14. 14.0 13.7 13.5 13. 13.0 1.8 1.5 1.3 1.0 11.8 11.6 11.3 11.1 10.9 16 19. 18.9 18.6 18.3 18.1 17.8 17.5 17. 16.9 16.6 16.3 16.0 15.7 15.4 15.1 14.8 14.5 14. 13.9 13.7 13.4 0 4.0 3.7 3.3.9.6. 1.8 1.5 1.1 0.7 0.4 0.0 19.6 19.3 18.9 18.5 18. 17.8 17.4 17.1 16.7 5 30.0 9.6 9.1 8.7 8. 7.8 7.3 6.8 6.4 5.9 5.5 5.0 4.5 4.1 3.6 3..7. 1.8 1.3 0.9 3 38.5 37.9 37.3 36.7 36.1 35.5 34.9 34.3 33.8 33. 3.6 3.0 31.4 30.8 30. 9.7 9.1 8.5 7.9 7.3 6.7 40 48.1 47.3 46.6 45.9 45.1 44.4 43.7 4.9 4. 41.5 40.7 40.0 39.3 38.5 37.8 37.1 36.3 35.6 34.9 34.1 33.4 50 60.1 59. 58.3 57.3 56.4 55.5 54.6 53.7 5.8 51.8 50.9 50.0 49.1 48. 47. 46.3 45.4 44.5 43.6 4.7 41.7 63 75.7 74.6 73.4 7. 71.1 69.9 68.8 67.6 66.5 65.3 64. 63.0 61.8 60.7 59.5 58.4 57. 56.1 54.9 53.8 5.6 80 96.1 94.7 93. 91.7 90.3 88.8 87.3 85.9 84.4 8.9 81.5 80.0 78.5 77.1 75.6 74.1 7.7 71. 69.7 68.3 66.8 100 10. 118.4 116.5 114.7 11.8 111.0 109. 107.3 105.5 103.7 101.8 100.0 98. 96.3 94.5 9.7 90.8 89.0 87. 85.3 83.5 15 150. 147.9 145.6 143.4 141.1 138.8 136.5 134. 131.9 19.6 17.3 15.0 1.7 10.4 118.1 115.8 113.5 111. 108.9 106.7 104.4 5 S 800 S (K and UCK characteristic) K, Ambient temperature [ C] UCK In [A] 5 0 15 10 5 0 5 10 15 0 5 30 35 40 45 50 55 60 65 70 75 10 1.4 1. 1.0 11.8 11.7 11.5 11.3 11.1 10.9 10.7 10.6 10.4 10. 10.0 9.8 9.6 9.4 9.3 9.1 8.9 8.7 13 16.1 15.9 15.6 15.4 15.1 14.9 14.7 14.4 14. 14.0 13.7 13.5 13. 13.0 1.8 1.5 1.3 1.0 11.8 11.6 11.3 16 19.8 19.5 19. 18.9 18.6 18.3 18.1 17.8 17.5 17. 16.9 16.6 16.3 16.0 15.7 15.4 15.1 14.8 14.5 14. 13.9 0 4.8 4.4 4.0 3.7 3.3.9.6. 1.8 1.5 1.1 0.7 0.4 0.0 19.6 19.3 18.9 18.5 18. 17.8 17.4 5 31.0 30.5 30.0 9.6 9.1 8.7 8. 7.8 7.3 6.8 6.4 5.9 5.5 5.0 4.5 4.1 3.6 3..7. 1.8 3 39.6 39.0 38.5 37.9 37.3 36.7 36.1 35.5 34.9 34.3 33.8 33. 3.6 3.0 31.4 30.8 30. 9.7 9.1 8.5 7.9 40 49.5 48.8 48.1 47.3 46.6 45.9 45.1 44.4 43.7 4.9 4. 41.5 40.7 40.0 39.3 38.5 37.8 37.1 36.3 35.6 34.9 50 61.9 61.0 60.1 59. 58.3 57.3 56.4 55.5 54.6 53.7 5.8 51.8 50.9 50.0 49.1 48. 47. 46.3 45.4 44.5 43.6 63 78.0 76.9 75.7 74.6 73.4 7. 71.1 69.9 68.8 67.6 66.5 65.3 64. 63.0 61.8 60.7 59.5 58.4 57. 56.1 54.9 80 99.1 97.6 96.1 94.7 93. 91.7 90.3 88.8 87.3 85.9 84.4 8.9 81.5 80.0 78.5 77.1 75.6 74.1 7.7 71. 69.7 100 13.9 1.0 10. 118.4 116.5 114.7 11.8 111.0 109. 107.3 105.5 103.7 101.8 100.0 98. 96.3 94.5 9.7 90.8 89.0 87. 15 154.8 15.5 150. 147.9 145.6 143.4 141.1 138.8 136.5 134. 131.9 19.6 17.3 15.0 1.7 10.4 118.1 115.8 113.5 111. 108.9 DIN-Rail components for rolling stock applications CDC00053D004 5/15

MCBs technical details Derating Derating table at different temperatures for S 500 UC MCBs: The rated value of the of a MCB refers to a temperature of 40 C. The following tables contain the derating factor k of load capability of DS01 T RCBO with temperature from 0 C to 70 C for the curve K. (T)= k * (40 C) S 500 UC Mounting Ambient temperature T ( C) 0 30 40 50 60 70 Single mounted 1.100 1.070 0.990 1.100 1.070 0.990 Mounted separately 1.05 1.0 0.94 1.05 1.0 0.94 with 9 mm distance Mounted side by side 1.000 0.970 0.890 1.000 0.970 0.890 5 Derating table at different temperatures for DS01 T RCBOs The rated value of the of a RCBO refers to a temperature of 0 C with characteristics K and 30 C for characteristics B and C. The following tables contain the derating of load capability of DS01 T RCBO with temperature from -40 C to 70 C for the curves B, C and K. DS 01 T B, C and K Ambient temperature T ( C) (A) -5-0 -10 0 10 0 30 40 50 55.6.5.4.3..1.0 1.9 1.8 1.7 4 4.9 4.8 4.6 4.5 4.3 4. 4 3.8 3.7 3.6 6 7.95 7.8 7.4 7.1 6.7 6.4 6 5.6 5.3 5.1 8 10.3 10.1 9.7 9.3 8.8 8.4 8 7.6 7. 6.95 10 11.8 11.6 11.3 11.0 10.7 10.3 10 9.7 9.3 9.15 13 15.65 15.4 14.9 14.4 14.0 13.5 13 1.5 1.0 11.8 16 18.65 18.4 17.9 17.4 17.0 16.5 16 15.5 15.0 14.8 0 3.1.8. 1.7 1.1 0.6 0 19.4 18.9 18.6 5 30.8 30.3 9. 8. 7.1 6.1 5 3.9.9.35 3 39.3 38.6 37.3 36.0 34.7 33.3 3 30.7 9.3 8.65 40 50.7 49.7 47.8 45.8 43.9 41.9 40 38.1 36.1 35.15 5/16 CDC00053D004 DIN-Rail components for rolling stock applications

MCBs technical details Influence of adjacent devices Multiply the rated (equivalent) referring to the new temperature by another factor only in case of presence of several devices installed alongside each other; see table. Influence of adjacent devices S00, DS00, DDA00+S00 1.0 Influence of adjacent devices Correction factor Fm Fm Factor 0.9 0.8 0.7 No. of adjacent devices Fm 1 1 0.95 3 0.9 4 0.86 0.6 1 3 4 5 6 7 8 9 5 0.8 6 0.795 5 of devices 7 0.78 8 0.77 9 0.76 >9 0.76 Influence of adjacent devices DS01 T Influence of adjacent devices Correction factor Fm No. of adjacent devices Fm 1 1.00 0.95 3 0.91 4 0.88 5 0.87 6 0.86 7 0.85 > 7 0.85 DIN-Rail components for rolling stock applications CDC00053D004 5/17

DIN-Rail components for rolling stock applications Wiring diagrams and overall dimensions Wiring diagrams MCBs RCBOs Auxiliary elements 3 Overall dimensions MCBs 4 6 6/1 CDC00053D004 DIN-Rail components for rolling stock applications

Wiring diagrams and overall dimensions Wiring diagrams S 00 MCBs series S 01 S 0 S 03 S 04 S 01 Na S 8 UC S 83 UC S 84 UC S 03 Na S 80 UC S 81 UC 6 S 800 S and S 800 S UC S 801 801 SSS801 80S/S 801SUC 80 SS80 UC 80S/S 80 SS80 803 SS803 803S/S 803SUC 803 804 SSS803 804 S/S 804SUC 804 S 804 S 804 SS 80 500PV-M UC S 803 PV-M S 803 PV-M S 803 PV-MS 803 PV-M S 804 PV-M S 804 PV-M S 804 PV-MS 804 PV-M M S 80 PV-M S 801 501 SSS801 80UC S 80 SS50 80UC SS80 803 SS503 803UC 504 SSS803 804 UC S 803 S 804 S 804 S 804 RCBOs DS 01 T DS01 M S 80 PV-M SDS 80 PV-M S 803 PV-M S 804 DS0C PV-M S 804 PV-M S 804 PV-M S 804 PV-M 01 T Na S 803 PV-M S 803 PV-M S 803 PV-M 1/ N X X /1 N T DS 0 1/ 3/4 X X /1 4/3 11 11 11 DIN-Rail components for rolling stock applications CDC00053D004 6/ DS 03 1/ 3/4 T DS 04 1/ 3/4 5/6 1/ 3/4 5/6 7/8 11

ick product product references iliary elements Quick Wiring product diagrams references and overall dimensions Auxiliary Wiring diagrams elements Anbau findet Contents Contents come come from come from System from from System Pro System Pro M Pro M Pro M M 014 014 Contents 014 014 come come catalogue come from (code from from (code (code System Pro Pro M Pro M M 014 014 014 CSC40000D011), catalogue (code (code page (code page 1078 page page 1078 1078 1078 CSC40000D011), page page 1078 page 1078 1078 Auxiliary Auxiliary and and signal and and signal contacts signal contacts Auxiliary and signal contacts /H6RSC-S/H6R SC-H6R SC-H6R SC-H6-11R SC-H6-0R SC-S/H6R SC-H6R Auxiliary and and signal and signal signal contacts SC-H6R SC-H6-11R SC-H6-11R SC-H6-0R SC-H6-0R SC-S/H6R SC-H6R SC-H6-11R SC-H6-0R SC-S/H6R SC-H6R SC-H6R S-S S-S S-S S-S S-S/H S-S/H S-S/H SC-S/H6R SC-H6R Used as Used Automatic S-S Used as S-S as Automatic S-S Automatic Manual Manual Used S-S/H S-S/H as S-S/H Used Automatic as /H6R SC-S/H6R SC-S/H6R Used as Automatic Manual Used as Automatic Automatic Manual Manual Manual auxiliary contact auxiliary auxiliary opening tomatic as Automatic Manual contact opening opening Manual auxiliary contact contact opening opening opening opening auxiliary contact auxiliary auxiliary opening contact contact opening opening opening opening al anual Used Used as as Automatic Automatic Manual opening Manual Used as pening Used Automatic as Used Automatic Manual Manual ontact opening opening Used as as Automatic Automatic Manual ng signal signal contact contact opening opening opening Manual 11 13 1 auxiliary opening contact 11 1311 111313 1 11 11 1311 11 13 1 11 13 1 13 3 1 13 13 3 13 13 3 31 113 3 auxiliary opening contact auxiliary opening contact opening 11 13 1 11 13 1 11 13 1 13 3 1 13 3 1 11 13 1 13 3 1 13 3 1 13 3 1 auxiliary contact opening 1 13 3 1 opening opening opening 95 1 1 1 1 95 95 95 1 195 1 95 1 95 1 1 95 95 1 95 1 11 1 11 1 11 1 11 1 11 111 1 11 11 1 1 11 11 1 1 11 1 Zubehör 1 14 1 14 1 14 14 4 14 4 14 4 1 14 1 14 1 14 14 4 14 4 14 4 96 98 96 98 96 98 14 96 98 96 98 96 98 1 14 1 14 1 14 1 14 1 114 14 1 114 14 1 14 14 4 14 4 14 4 14 14 4 4 14 4 98 96 98 96 98 96 98 1 14 1 14 1 14 1 14 1 14 1 14 1 14 1 14 1 14 SC-H6-0R S-H0 and S-H0X S-H1 S-H1 S-H30 SC-H6-0R SN01-S S-H0 S-H0 and S-H0 and S-H0X and and S-H0X SN01-S SN01-IH S-H1 S-H1 S-H1 S-H1 SN01-IH S-H1 S-H1 S-H30 S-H30 S-H30 6-0R SN01-S SN01-S SN01-IH SN01-IH S-H0 S-H0 and Anbau and and S-H0X S-H1 S-H1 findet S-H1 S-H1 durch S-H30 S-H30 Kunde Used Used as SC-H6R as SC-H6R Automatic Automatic Manual SC-S/H6R SC-H6R Manual SC-S/H6R SC-H6R SC-S/H6R SC-S/H6R auxiliary as omatic R auxiliary contact contact Used opening SC-H6R Automatic Manual Used asopening Manual as Automatic opening Automatic SC-S/H6R opening Manual Manual Used SC-S/H6R Used as as Automatic Automatic Manual SC-H6R SC-H6R Used Manual Used as as Automatic Automatic Manual Manual SC-S/H6R SC-S/H6R Used Used as as Automatic Automatic Manual Manual 11 1 auxiliary 1 ontact ening s Used Automatic opening opening 11 1 auxiliary 11contact 1 1 as Automatic Manual opening 11contact 1 opening 1 11 1 opening 1 1 opening 11 1 1 opening signal signal contact contact opening opening opening auxiliary opening auxiliary contact contact opening opening opening opening signal signal contact contact opening opening opening opening 11 1 Manual 11 1 Used 11 as 1Used Automatic as 95Automatic 1 Manual 95 Manual 1 95 1 Used as Used Automatic as 11 1 Automatic Manual 11 1 Manual 11 1Used as Used 95Automatic as 1 Automatic 95 Manual 1 95 11 1 11 1 11 1 95 1 95 1 95 1 11 1 11 1 11 1 95 1 95 1 Manual 1 95 1 auxiliary 11 ntact 1 11 opening contact 1 11 1 1 opening 1 11opening 1 1 opening signal contact signal opening contact opening opening opening auxiliary contact auxiliary opening contact opening opening opening signal contact signal contact opening opening opening opening 11 1 11 111 1 11 111 1 11 1 95 1 95 95 1 1 95 95 1 1 95 1 1 11 6 111 1 11 111 1 1 1 1 14 1 14 1 1 1 1 1 1 1 1 14 1 14 1 14 1 14 1 14 1 14 11 1 95 1 95 951 1 95 951 96 98 96 98 S-H03 S-H03 S-H03 S-H11 S-H11 and S-H11 and S-H11X and and S-H11X S-H0 S-H0 and S-H0 and S-H0X and and S-H0X 4 4 14 1 14 96 98 96 98 96 98 96 1498 96 98 14 96 98 S-H03 S-H03 S-H11 S-H11 and and and S-H11X S-H0 S-H0 and and and S-H0X Other Other contents Other contents come come from come from System from from System System S500-H11 S500-H11 S500-H0 S500-H0 Pro Other Other Pro M Other Pro 01 M Pro M 01 contents 01 M 01 come come catalogue come from (code from from (code (code System Pro Pro M Pro 01 M CSC40000D010), 01 M 01 catalogue page (code page (code 74 page (code page 74 74 74 CSC40000D010), page page 74 page 74 74 S-H03 1 14 1 14 1 14 96 98 96 98 96 S-H11 98 96 and 98 96 98 S-H11X 96 98 1 14 S-H0 1 14 1 14 and S-H0X 1 14 1 14 1 95 96 98 96 98 1 96 98 96 98 1 1 14 1 14 1 13 13 1 14 1 14 1 14 1 14 3 96 98 96 98 13 3 13 96 98 96 98 96 98 96 98 111 S 800-AUX S800-AUX S800-AUX 4 1 14 S800-AUX/ALT S800-AUX/ALT S 800-AUX/ALT 98 1 96 Contents Contents come come from come from technical from from technical Contents catalogue come come come from from dedicated to from to to technical to S800/S500 (code catalogue (code (code CCC413003C003), Hilfskontakt dedicated to to to page S800/S500 page 46 page page 46 46 46 (code (code (code CCC413003C003), page page 46 page 46 46 S 500-H11 S 500-H0 S 500-S11 S 500-S0 1 1 Schliesser und und 1 Öffner 1 11 1 S500-H11 11 S500-H0 95 S500-S11 S500-S0 S500-H11 S500-H0 S500-S11 S500-S0 Schliesser 13 13 13 13 1 1 3 3 4 4 Bottom-fitting auxiliary 14 14auxiliary contacts contacts 14 14 S500-H11 Bottom-fitting SC-H01 S500-H11 SC-H01 auxiliary contacts S500-H0 SC-H10 S500-H0 SC-H10 SC-H01 SC-H10 Auxiliary and signal contacts SC-H01 SC-H10 m1 Contents m Contents come come from come from from from Miniature m Circuit-Breakers for for for for m m3 m4 Railway Contents Railway come come come from Applications from from (code Miniature (code (code CDC00053D001), Circuit-Breakers for page for page for 3 page page 3 3 3 Railway Applications (code (code (code CDC00053D001), page page 3 page 3 3 05 05 97 97 07 97 07 97 06 06 98 98 08 08 98 98 S500-S11 S500-S11 S500-S0 S500-S0 Contents Contents come come from come from technical from from technical Contents catalogue come Signalkontakt come come from from dedicated to from to to technical to S800/S500 (code catalogue (code (code CCC413003C003), dedicated to to to page S800/S500 page page page 143 (code (code 143 CCC413003C003), page page 143 143 143 (code 143 143CCC413003C003), page 1 1 Schliesser und und 1 Öffner 1 Schliesser 6/3 CDC00053D004 DIN-Rail components for rolling stock applications 45007F0001

Quick product references Overall dimensions SC-CM motor operating device Low voltage use: 1...30 V AC, 1...48 V DC N L FAULT 1-30 V AC 1-48 V DC Use at 30 V AC via a TM15/1 bell transformer N L FAULT 1 3 4 5 SIGN 1 3 4 5 SIGN 5 6 7 8 TM15/ 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF AUX AUX 1 3 4 OFF 6 7 8 9 10 11 OFF 6 7 8 9 10 11 30 V AC ON MAX 1500m open closed ON MAX 1500m open closed 6 Low voltage use of several motor operating devices: 1...30 V AC, 1...48 V DC 1-48 V DC 1 3 4 5 SIGN 1 3 4 5 SIGN 1 3 4 5 SIGN 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF AUX AUX AUX 6 7 8 9 10 11 6 7 8 9 10 11 6 7 8 9 10 11 closed 1 open closed open closed open n... Use of several motor operating devices at 30 V AC via a single safety transformer 1-30 V a.c. 30 V AC 1 3 4 5 SIGN 1 3 4 5 SIGN 1 3 4 5 SIGN 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF 0 OFF AUX AUX AUX 6 7 8 9 10 11 6 7 8 9 10 11 6 7 8 9 10 11 open closed open closed open closed 1 n... DIN-Rail components for rolling stock applications CDC00053D004 6/4

Quick product references Overall dimensions A Product (with modular profile) A [mm] B [mm] C [mm] D [mm] E [mm] Modules D B C 45 Miniature circuit breakers S 01 MT 44-69 88 17.5 1 S 01 MT Na 35 S 0 MT 35 S 03 MT 5.5 3 S 03 MT Na 70 4 S 04 MT 70 4 6 E S 01 MT UC 44-69 88 17.5 1 S 0 MT UC 35 S 03 MT UC 5.5 3 S 04 MT UC 70 4 S 01 M UC 44-69 88 17.5 1 S 0 M UC 35 S 03 M UC 5.5 3 S 04 M UC 70 4 S 01 P 44-69 88 17.5 1 S 01 P Na 35 S 0 P 35 S 03 P 5.5 3 S 03 P Na 70 4 S 04 P 70 4 S 81 UC 44-69 90 17,5 1 S 8 UC 35 S 83 UC 5,5 3 S 84 UC 70 4 S 801 S 46 76,5 8,5 95 6,5 1 S 80 S 53 S 803 S 79,5 3 S 804 S 106 4 S 801 S UC 46 76,5 8,5 95 6,5 1 S 80 S UC 53 S 803 S UC 79,5 3 S 804 S UC 106 4 S 501 UC 56,5 80 9 91 5 1 S 50 UC 50 S 503 UC 75 3 S 504 UC 100 4 DS 01 T 43 58 69 85 35 6/5 CDC00053D004 DIN-Rail components for rolling stock applications

A Product (with modular profile) A [mm] B [mm] C [mm] D [mm] E [mm] Modules SC-S/H6R 44-69 85 8,8 0.5 D 45 SC-H6R SC-H... See drawings S-H... 44-69 85 8,8 0.5 S-H...X B S-S... C S-S/H S 800-AUX See drawings S 800-AUX/ALT See drawings S 500-H... See drawings S 500-S... See drawings SC-Ax 44-69 85 17,5 1 S-Ax S 800-SOR See drawings 6 E SC-CMx See drawings S-UA 44-74 85 17,4 1 S 800-UVR See drawings S 800-RSU-H S 500-RSU-H S 803 S-SCL See drawings See drawings See drawings DIN-Rail components for rolling stock applications CDC00053D004 6/6

Quick product references Overall dimensions S 00 with bottom-fitting auxiliary contact S 01 S 01 NA S 0 S 03 S 03 NA S 04 69 17.5 35 5.5 70 44 S803W-SCL-SR 104 85 45 6.8 17.5 17 6 S C-CM SC-CM FC-ARI, FC-CM 35.5 15.4 5.4 35.5 15.5 5.4 S800-SOR S800-UVR 11 89 45 11 89 45 55 (SC-CM1) 70 87 (SC-CM/3) (SC-CM4) 15.5 30.5 50,3 80,5 53 15.4 30.5 50.3 80.5 S800-BB50 S800-BBPC10 6/7 CDC00053D004 DIN-Rail components for rolling stock applications

We reserve all rights in this document an in the information contained there in. Reproduction, use or disclosure to third parties without epress authority is strictly forbidden. ABB Switzerland Ltd S800-AUX and S800-AUX/ALT Auxiliary and signal contact S 800-AUX, S 800-AUX/ALT ions ance MCB T A B C D E F 1-9 35 6 46 119.4 15.3 8.5 76.5 1<>1 4 5 6 7 8 9 1-53 6.50 S 800-SOR 46.1 Shunt 54 trip and S 800-UVR Undervoltage release 48.5 50.3 6.5 Datei 845800_P 3. 50.3 6 45 95 >< 1<>1 1- >< 1<>1 1 3 4 5 6 7 1 8 9 3 4 5 6 7 8 9 6 6 54 6 79.50 3 107.4 with strain relief 1 Blaufreigabe 18.05.09 MaS Ind. Änderung / Modification Datum / Date Vis. 78.3 without strain relief Gez. Ersatz für 31.03.10 MaS Massstab Drawn Replacement for Scale Switzerland Ltd. Geprüft Zusammenstellung CMC Low Voltage Products 31.03.10 MaS Checked Assembly drawing Fulachstrasse 150, P.O.Box Blattgrösse Blattanzahl 1:1 CH - 801 Schaffhausen A3 Page size of pages 1 / 1 Produktegruppe S800 Apparat Index S800 RSU Product line Subscript 1<>1 46 BG RSU_S800_-Pol 35 8.5 76.5 >< 1<>1 CCC413017Z0001 134. E 3 1 Blaufreigabe 18.05.09MaS Ind. Änderung / Modification Datum / Date Vis. Gez. Switzerland Drawn 31.03.10 MaSErsatz für Massstab Ltd. Replacement for Scale CMC Low Voltage Products Geprüft Fulachstrasse 150, P.O.Box Checked 31.03.10 MaSZusammenstellung 6 Assembly drawing CH - 801 Schaffhausen Blattgrösse Page sizea3 Blattanzahl of pages 1 / 1 1:1 F Produktegruppe Product line S800 Apparat S800 RSU Index Subscript 845800_P BG RSU_S800_-Pol_gesperrt 1 845800_Pc 1 Datei 845800_Pc 76.50 S800-SOR Shunt trip and S800-UVR Undervoltage release 6 46 We reserve all rights in this document an in the information contained there in. Reproduction, use or disclosure to third parties without epress authority is strictly forbidden. ABB Switzerland Ltd A B C D 1-45 95 14 S500-H.. and S500-S.. Auxiliary and signal contact S 500-H... and S 500-S... Auxiliary and signal contact S800-RSU-H and S500-RSU-H Remote Switch S 800-RSU-H 54 and S 500-RSU-H Remote Switch 48,5 46,1 CCC413004L00 134, 119,4 >< 1<>1 134. 54 6 6 3 1 Blaufreigabe 18.05.09MaS Ind. Änderung / Modification Datum / Date Vis. Gez. Switzerland Drawn 31.03.10 MaSErsatz für Massstab Ltd. Replacement for Scale CMC Low Voltage Products Geprüft Fulachstrasse 150, P.O.Box Checked 31.03.10 MaSZusammenstellung Assembly drawing CH - 801 Schaffhausen Blattgrösse Page sizea3 Blattanzahl of pages 1 / 1 1:1 Produktegruppe Product line S800 Apparat S800 RSU Index Subscript Datei 845800_Pc 4 BG RSU_S800_-Pol_gesperrt 845800_Pc 1 S803S-SCL Short circuit limiter 73.5 19 31.6 S 803 S-SCL Short circuit limiter 79.5 53 6.5 35 79.8 7.5 9.5 119.4 15.3 45 95 46.1 48.5 50.3 3 3. 50.3 651 45.4 6 7 35 79 56.5 7 30 79.5 53 6.5 6 46 141 CCC413015Z0001 CCC413015Z0001 CCC413019Z0001 CCC413019Z0001 8.5 76.5 8 3 46 76.5 7 73.5 CCC41373Z0001 CCC413014Z000 134. 45 3, 95 CCC413016Z0001 54 CCC4137Z0001 All contents in the page come from System Pro M 014 catalogue (code CSC40000D011), page 1139, and from technical catalogue dedicated to S800/S500 (code CCC413003C003), page 16 and 177 DIN-Rail components for rolling stock applications CDC00053D004 6/8

ABB Low Voltage solutions for rolling stock equipment As part of our ongoing efforts to better satisfy your requirements, we develop and design solutions and products which are reliable, safe, easy to install and esthetic. By offering connection solutions and in particular the entrelec terminal blocks and ADO System terminal blocks, our System pro M Compact modular equipment range, our dedicated contactor range and our new range of voltage and sensors, we are anxious to reinforce indeed increase our technological leadership. 7 Miniature Circuit Breakers (MCBs) DIN-Rail mounting up to 15 A up to 50 ka breaking capacity Residual Current Devices with Over protection (RCBOs) DIN-Rail mounting up to 40 A 6 ka breaking capacity Rail-mounted contactors 500/1000 V AC or 440/1000/1500 V DC 63 to 4000 A For «power» applications in fixed installations. They feature simple and robust construction for intensive usage and long service life. Contactors TAL and AF contactors has been developed in order to meet the specific requirements of rolling stock applications (wide coil voltage range, ring tongue terminals ) and complies with main standards: Electrical equipment for rolling stock IEC 60077-1 & IEC 60077- Shocks and vibrations IEC 61373 Fire and smoke NF F 16101 / NF F 1610, ASTM standards Our contactor range is available from: 5.5 to 160 kw, 400 V, AC-3 5 to 500 A, 690 V, AC-1, θ 40 C. entrelec terminal blocks ADO-ADO terminal blocks Spring terminal blocks Terminal blocks with tabs Terminal blocks with threaded components Rail-mounted terminal block assemblies. 7/1 CDC00053D004 DIN-Rail components for rolling stock applications

Rolling stock Very high speed Regional transport Urban and Suburban transport Locomotives Maintenance. Other ABB products: AC Track: pantograph circuit breakers Converters IGBT GTO: IGBT/GTO power semiconductors Traction motors Robots Auxiliary LV motors Turbochargers. Tmax moulded case circuit breakers Up to 50 A (4 sizes) SNCF-qualified for mounting in rolling stock. Current sensors Closed loop hall effect sensors CS type sensors - 300 to 000 A Voltage detectors from 50 V to 1500 V DC Voltage sensors Electronic technology Voltage measurements from 50 V to 5000 V. 7 LS position switches Plastic or metal case Width: 30, 40, 60 cm Version IP67, connection by cable. Oucam 100 Machine for Wire label with partial shrinking Improve mounting and removing of the TYCO sleeves Safe markers on the wire without termination No loosing risks Specially adapted to IDC and Spring terminations. Control and signalling accessories Pushbuttons Rotating knobs Indicator lights Switches. DIN-Rail components for rolling stock applications CDC00053D004 7/

References to other low voltage-related documents for traction In order to help you to find the support necessary for achieving the respective objectives of quality, safety and reliability, a list of the most relevant low voltage-related documents is given below. In these documents, it s possible to find other product ranges required in the Railways segment. Catalogues System pro M compact DIN-Rail components for low voltage installation Order code: CSC40000D011 Brochures R series contactors Control of DC power circuits up to 5000 A Order code: 1SBC104116B001 7 S800/S500 The High Performance MCB Order code: CCC413003C003 DC switching contactors, type GAF A compact contactor up to 1000 V DC Order code: 1SFC101004B001 Motor protection & control up to 18.5 kw / 0 hp Manual motor starters, contactors, overload relays & softstarters Order code: 1SBC100155C003 Electronic Products and Relays Electronic timers, measuring and monitoring relays for railways solutions Order code: CDC110084B001 SACE T max XT New low voltage mouldedcase circuit-breakers up to 50 A Order code: 1SDC10033D00 7/3 CDC00053D004 DIN-Rail components for rolling stock applications

Brochures Low voltage products and solutions for fixed and rolling stock applications Order code: 1TXH000041B001 Powering the railways Efficient and reliable solutions for sustainable mobility Order code: 9AKK105408A3016 7 App Let ABB take you on an original train journey! Did you know that ABB technologies are key components for world s rail vehicles and track-side infrastructure? Passengers may not notice these things as the landscape slides by. ABB solutions and services for rail not only puts trains in motion, they watches over the trip as well. DIN-Rail components for rolling stock applications CDC00053D004 7/4

Contact us www.abb.com Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB AG does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. Any reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of ABB AG. Brochure number CDC00053D004 (05/14-pdf) Copyright 014 ABB All rights reserved