LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE Velleman Legen Heirweg 33 9890 Gavere Belgium
SPECIFICATIONS DIGITAL MULTIMETER 3 1/2 backlit LCD Automatic polarity indication DC voltage 200mV to 600V in 5 steps AC voltage 200V and 600V DC current 200uA to 10A in 5 steps Resistance test 200ohm to 2Mohm Diode, transistor and continuity tester Data Hold function and buzzer CATI 600V CATII 300V REGULATED POWER SUPPLY Selectable output voltages: 3-4.5-6 - 7.5-9 - 12Vdc Output 1.5A (2A peak) LED overload indication With output on/off switch Very low ripple LED power indication SOLDERING STATION Low-voltage iron: 24V Ceramic 48W heating element with temperature sensor Temperature range: OFF 150-450 C Low voltage iron : 24V Lead free soldering compatible Velleman page 2
Part No Description LAB-P01 Main enclosure part (*) LAB-P02 LAB-P03 LAB-PM01 LAB-P06 LAB-P07 LAB-M01 LAB-M04 LAB-M02 LAB-M03 LAB-P08 LAB-P04 LAB-P05 LAB-F01 Main enclosure bottom part Mains connector support Alu heat sink plate Power supply front panel Power supply turning knob Multimeter front panel Multimeter display window Multimeter turning knob Multimeter hold knob Multimeter battery holder Soldering iron support Soldering station knob Fire proof sponge tray for soldering station LAB1SCS LAB1STD LAB1SOLE BITC10N1 LAB1SPNG Soldering Iron (grey + red rubber) Soldering stand Electronics + transformer Spare Bit Sponge LAB1DMM Multimeter PCB assembly + connectors LAB1PWR Power supply PCB + transformer + connectors 6LR61 LAB1TSTL HLAB1(V)-1 9V battery Test leads for multimeter (straight type) Manual (*V = Voltcraft version) LAB1BOX(V) Carton Box for packaging + foam blocks (*) (*) Voltcraft printing version for LAB1V Velleman page 3
Declaration of Conformity We, Manufacturer Velleman Legen Heirweg 33 9890 Gavere Belgium declare that the product LAB1-3 in one LAB device if used according the instructions included with the unit meet the directives in accordance with 89/336/EEC-EMC 73/23 EEC Directive and EN 55022 Electromagnetic compatibility - Emission (CISPR22 level) IEC 61000-4 Electromagnetic Compatibility - Generic immunity standard EFT IEC 600065 Low voltage directive 73/25/EG - Insulation IEC 1010-1 Safety requirements for equipment for measurement, control and laboratory use IEC 61326 Electromagnetic Compatibility - General immunity standard ESD For the manufacturer Date: 03/06/2005 Signature: Name: Stephan Santens R&D manager Velleman page 4
DIAGRAMS Velleman page 5
MAINS SUPPLY BLOCK DIAGRAM TRANSFORMER SOLDERING STATION SECTION TRANSFORMER DC SUPPLY SECTION DMM BACKLIGHT 9V BATTERY DMM SECTION Velleman page 6
Power supply Velleman page 7
Soldering station Velleman page 8
Multimeter part 1 Velleman page 9
Multimeter part 2 Velleman page 10
CE - TEST RESULTS Velleman page 11
Radiated disturbance Field MR-079-2005 EUT: LAB1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: CISPR22 / EN55022 Class B Comment: Pré-compliance Power supply connected with Multimeter Start of Test: 1/06/2005 / 9:31:01 SCAN TABLE: "CISPR22 Field" Short Description: CISPR22 Field Strength Start Stop Step Detector Meas. IF Transducer Frequency Width Time Bandw. 30.0 MHz 1.0 GHz 80.0 khz QuasiPeak 10.0 ms 120 khz CBL61113M Velleman page 12
Company Name: Report No.: Test Report EFT (Electrical Fast Transient) ESM Engineering Services & Marketing EMC lab MR-079-2005 Date of test: June-01-2005, 10:22 Tester: Customer: E. U. T.: LAB 1 Meuleman Hendrik Velleman S.Santens Standard used: IEC 61000-4-(2004) Application: Ambient Temperature: Power Supply AC 23.2 C Humidity: 49% Pressure: Note: T e s t R e s u l t 1012hPa Pré-compliance Result: Test passed! Class A result Velleman page 13
D. U. T Name: LAB 1 Serial Number: Operation Mode: Connection: Description: Prototype DMM on Reading Supp AC 220 V 50 Hz Soldering iron ; DC Poser supply ; DMM T e s t P r o c e d u r e Pulse Name: IEC 61000-4-(2004) : Part 4 (100kHz) Test generator: EFT500 Software No.: 000509 Serial No.: 0196-97 Coupling network: CNI501 Serial No.: 0695-03 T e s t S e t u p V: 1000 V f: 100 khz td: 0.8 ms tr: 300 ms Mode: Polarity: Asynchronous Alternate Coupling: L, N, PE, L+N, L+PE, N+PE, L+N+PE Test duration: 1 m Time between Tests: 2 s T e s t R e s u l t V: ±1000 V f: 100 khz td: 0.8 ms tr: 300 ms Coupling: L, N, PE, L+N, L+PE, N+PE, L+N+PE Elapsed Test time: 1 m Result: Test passed! Class A result Velleman page 14
Company Name: ESM Engineering Services & Marketing EMC lab Report No.: MR-079-2005 Date of test: June-01-2005, 10:06 Tester: Meuleman Hendrik Customer: Velleman S.Santens E. U. T.: LAB 1 Standard used: IEC 61000-4-(2004) Application: Power Supply AC Ambient Temperature: 23.2 C Humidity: 49% Pressure: 1012hPa T e s t R e s u l t Result: Test passed! Class A result Velleman page 15
D. U. T Name: LAB 1 Serial Number: Operation Mode: Connection: Description: Prototype DMM on Reading Supp AC 220 V 50 Hz Soldering iron ; DC Poser supply ; DMM T e s t P r o c e d u r e Pulse Name: IEC 61000-4-(2004) : Part 4 (5kHz) Test generator: EFT500 Software No.: 000509 Coupling network: Serial No.: 0196-97 CNI501 Serial No.: 0695-03 T e s t S e t u p V: 1000 V f: 5 khz td: 15 ms tr: 300 ms Mode: Polarity: Asynchronous Alternate Coupling: L, N, PE, L+N, L+PE, N+PE, L+N+PE Test duration: 1 m Time between Tests: 2 s Velleman page 16
T e s t I n t e r r u p t i o n Test interrupted! Elapsed Test time: 50 s Coupling: L Display read-out DMM affected by pulses T e s t R e s u l t V: ±1000 V f: 5 khz Coupling: Elapsed Test time: L, N, PE, L+N, L+PE, N+PE, L+N+PE 1 m Result: Test passed! Class A result td: 15 ms tr: 300 ms Velleman page 17
Low voltage Insulation MR-079-2005 EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: IEC60065 (1998) Comment: Pré-compliance Power supply connected with Multimeter Date of Test: 1/06/2005 Short Description: Insulation resistance test 1 minute 500Vdc resistance must be > 4Mohm (reinforced insulation) Test result: 809Mohm between mains (L+N) connection and Solder iron: OK Velleman page 18
Low voltage Dielectric strenght MR-079-2005 EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: IEC60065 (1998) Comment: Pré-compliance Power supply connected with Multimeter Date of Test: 1/06/2005 Short Description: Dielectric strength test 1 minute Test result: 3KV between mains (L+N) connection and soldering iron: PASS 3KV between mains (L+N) connection and supply GND: PASS Velleman page 19
Electrostatic Discharge immunity test MR-079-2005 EUT: LAB 1 (Prototype) Manufacturer: Velleman ( Witness S.Santens) Operating Condition: Normal Test Site: ESM EMC centre Operator: Meuleman Hendrik Test Specification: CIE IEC 61326 Comment: Pré-compliance Power supply connected with Multimeter Date of Test: 1/06/2005 Short Description: + and - 4KV ESD, horizontal and vertical coupling RESULT: PASS Velleman page 20
Velleman Legen Heirweg 33 9890 Gavere Belgium Velleman page 21