INNOVATIVE AND EFFICIENT THREADING SOLUTIONS FLEXIBLE EXPERT SERVICE
QUALITY EFFICIENCY EXPERT SERVICE MATECH Paper provides innovative and efficient rope threading solutions from the press, coater, scanner and calender to the paper machine reel. We know the success of your production depends on keeping your machines up and running at top efficiency. In this area we excel! With the best selection of products for long-term and maximum performance, our experienced people will help you to solve your threading challenges and will bring you its own experience to take care of your projects of renovation or to build new rope threading systems. For an evaluation of your equipment needs, for a proposal or for a specific question concerning your threading system, call us today!
PNEUMATIC ROPE STRETCHER Proper and constant rope tension sliding carriage directly mounted on cylinders for a fast reaction in case or rope tension variation. Low maintenance simple stretcher design with few moving parts. The slide carriage is mounted with stainless steel guiding wheels with no lubrication requirements. Prevent unexpected rope breakage and lost an electronic sensor system alerts operators to change ropes when the maximum rope elongation is reached. Easy carriage removal and routine maintenance. Available for threading system having one, two or three rope configuration, in vertical or horizontal design. Quick opening guard packages made in expanded or solid steel material available on request. Forfurtherinformationpleasecontactus: MATECHPAPER2008 QuartierLauveBlancs 07800SaintLaurentduPape France Tel:+33(0)475853726orFax:+33(0)475850363 Tél.:33(0)475853726 Fax:33(0)475850363 Email:lb@matechpaper.com Contact:lb@matechpaper.com
OPTITENSION ROPE STRETCHER Available for one, two and three rope x configuration with a wide range of rope take-ups in horizontal or vertical design. 4 sensors mounted on the stretcher beam will advise the operator to replace ropes. Large cast iron sheaves (Ø 355 mm) for maximum rope life in reducing rope flexing and twist. Our experienced technician team will determine the needed mounting space, determine path of ropes leading to and returning from the stretcher, install or supervise the equipment mounting and assist you for the new equipment start up. Heavy steel beam construction allowing a high rope tension performance by keeping the carriage rails straight. Cylinders are directly connected to the slide carriage, allowing a quick reaction in case of rope tension variability. Mounted with 4 pneumatic cylinders equipped with viton high temperature seals, chrome plated rod and shock absorber technology. Stainless steel guide wheels allow a perfect alignment and a free slide carriage movement. Wheels are locked in the track and require no maintenance or lubrication, eliminating associated problems with plastic slides.
MATECH PAPER - HORIZONTAL ROPE STRETCHER Model OPTITENSION MTH 2027 Dimensional Data 585 mm A 720 to 880 mm A Stretcher Model Rope elongation A capacity (m) Overall length (m) MTH2027-4 4 2.8 MTH2027-5 5 3.5 MTH2027-6 6 4 MTH2027-7 7 4.5 MTH2027-8 8 5 MTH2027-9 9 5.5 MTH2027-10 10 6 Note : All dimensions shown in meters. Custom equipment available upon request. 595 mm INNOVATIVE AND EFFICIENT TAIL THREADING SOLUTIONS Quartier Lauve Blanc, 07800 St Laurent du Pape, FRANCE Tel: + 33 4 75 85 37 26 Fax: + 33 4 75 85 03 63 Mobile : +33 6 74 97 68 10
MATECH PAPER - RODLESS VERTICAL ROPE STRETCHER Model OPTITENSION MTV 2027 Dimensional Data 350 mm 750 mm A A One Rope System Two Rope System Stretcher Model Rope elongation A capacity (m) Overall length (m) MTV2007-3 3 2.5 MTV2007-4 4 2.5 MTV2007-5 5 2.5 MTV2007-6 6 2.5 MTV2007-7 7 2.7 MTV2007-8 8 3 MTV2007-10 10 3.5 Note : All dimensions shown in meters. Custom equipment available upon request. 760 to 1150 mm INNOVATIVE AND EFFICIENT TAIL THREADING SOLUTIONS Quartier Lauve Blanc, 07800 St Laurent du Pape, FRANCE Tel: + 33 4 75 85 37 26 Fax: + 33 4 75 85 03 63 Mobile : +33 6 74 97 68 10
ROPE PULLEYS RETURN TRANSFER SEPARATOR Forfurtherinformationpleasecontactus: MATECHPAPER2008 QuartierLauveBlancs 07800SaintLaurentduPape France Tel:+33(0)475853726orFax:+33(0)475850363 Tél.:33(0)475853726 Fax:33(0)475850363 Email:lb@matechpaper.com Contact:lb@matechpaper.com Maximal rope lifetime made from high quality cast iron, with numerically controlled machine for a smooth groove surface. Quick pulley alignment and replacement only 2 screws have to be loosened for make the pulley fine tuning or replacement. Strong mechanical mounting robust double bearing mounting and dynamically balanced pulley at a minimum of 2000 mpm. Three different types of mounting swivel/simple/sealed bearing mounting available. Easy and safe rope threading 10 coated colors available for differentiate inner and outer rope sheaves. Stainless steel pulleys for wet press, size press and coating applications available on request.
ROPE PULLEY RANGE RETURN PULLEY, ONE GROOVE 50 SERIES No. ROOT Ø A (mm) 1106 Ø150 1108 Ø205 1110 Ø255 1112 Ø305 1114 Ø355 1116 Ø405 RETURN PULLEY, ONE GROOVE 90 SERIES No. ROOT Ø A (mm) 1401 Ø110 1402 Ø130 1403 Ø150 1404 Ø180 1405 Ø205 TRANSFER PULLEY, 2 ROPES Ø150 SERIES No. ROOT Ø A (mm) 2102 Ø150 2103 Ø205
TRANSFER PULLEY, THREE ROPES SERIES No. ROOT Ø A (mm) 3103 Ø150 3104 Ø200 3105 Ø290 SEPARATOR PULLEY, TWO GROOVES SERIES No. ROOT Ø A (mm) 2204 Ø110 2206 Ø150 2208 Ø205 2210 Ø255 SEPARATOR PULLEY, THREE GROOVES SERIES No. ROOT Ø A (mm) 3306 Ø150 3308 Ø200 FIXED ROLL AND FREE WHEELING ROLL PULLEY SERIES CH8-02041910
PULLEY MOUNTINGS We offer a range of 3 adaptable mountings for our standard rope pulleys: 1 Simple mounting 00 For a long rope lifetime made from high quality cast iron, with numerically controlled machine. Quick pulley alignment and replacement Pulley blocking on its shaft with only two tightening screws. Robust double bearing mounting. On the run greasing with our stationary grease feeder. 2 Swivel mounting 01 For a long rope lifetime made from high quality cast iron, with numerically controlled machine. Pulley can be angle positioned (30 max). Robust double bearing mounting. On the run greasing with our stationary grease feeder. 3 Seal hub mounting 02 Prevent bearing failures for contaminated areas like wet press, coating station, size press. Greasing by the axis. High temperature resistance available upon request. Stainless steel configurations available for wet press, size press, and coating station upon request.
MOUNTING HARDWARE Simple & easy to install for a quick and safe pulley adjustment. Made in a smooth solid steel for optimize welding ability. Maximal rust resistance black powder treatment is applied on T-arms and shafts, double epoxy coating for mounting blocks. Available in different diameter from 30 to 50 mm and different length from 300 to 600 mm. Stainless steel hardware for wet press, size press and coating applications available on request. Forfurtherinformationpleasecontactus: MATECHPAPER2008 QuartierLauveBlancs 07800SaintLaurentduPape France Tel:+33(0)475853726orFax:+33(0)475850363 Tél.:33(0)475853726 Fax:33(0)475850363 Email:lb@matechpaper.com Contact:lb@matechpaper.com
MOUNTING HARDWARE The design of our steel hardware is very simple and easy to install for making a proper pulley alignment. The maintenance people appreciate this system, because it's saving a lot of time. T SHAFT SERIES No. FOR AXIS DIAMETER (mm) SHAFT LENGTH (mm) CH8-02021011 Ø30 lg.300 CH8-02021012 Ø30 lg.500 CH8-02021013 Ø30 lg.600 CH8-02021014 Ø40 lg.300 CH8-02021015 Ø40 lg.500 CH8-02021016 Ø40 lg.600 CH8-02021017 Ø45 lg.300 CH8-02021017/1 Ø45 lg.350 CH8-02021017/2 Ø45 lg.400 CH8-02021018 Ø45 lg.500 CH8-02021019 Ø45 lg.600 CH8-02021037 Ø50 lg.300 CH8-02021038 Ø50 lg.500 CH8-02021039 Ø50 lg.600 FASTENING BLOCK SERIES CH8-02021021 CH8-02021022 CH8-02021023 CH8-02021024 FOR AXIS DIAMETER (mm) Ø30 Ø40 Ø45 Ø50
PULLEY/HARDWARE ORDERING PROCEDURE 1- Choose a mounting type (simple or swivel). Swivel mounting CH8-02020001 Simple mounting No. 00 Swivel mounting No.01 2- Choose a pulley design (1108, 2103 ). 3- Choose the axis diameter (mm). 4- Choose the axis length (mm). Example: If you require a single rope pulley with one 90 groove, root Ø 150 mm, with swivel Mounting, 40 mm axis diameter with 350 mm axis length Please ask for: Mounting 01 / 1403 / 40 mm / 350 mm For all other product orders (T shaft, fastening block ) please specify series number, diameter and length. For any question, do not hesitate to contact us: E-mail: lb@matechpaper.com Tél: 33 (0) 4 75 85 37 26 Fax: 33 (0) 4 75 85 03 63
DRYING CYLINDER RING EXCESSIVEGROOVEDEPTH 4 mm PROPERGROOVEDEPTH Avoid to repeat the threading process eliminate tail wandering and slack caused by the excessive speed difference between ropes (paper tail) and dryer surface (paper sheet). This speed difference due to an excessive groove depth involves many paper tail breaks and rethreading trials after a web break. Tight tail grip due to the special "V" groove design. Strongly mounted and fixed on the drying cylinder to prevent any ring movement or vibration. Made in solid steel with epoxy coating. Available for every dryer groove shape and size. We recommend a ring installation on a whole rope section at the same time. Forfurtherinformation,pleasecontactus: MATECHPAPER2008 QuartierLauveBlancs 07800SaintLaurentduPape France Tel:+33(0)475853726orFax:+33(0)475850363 Tél.:33(0)475853726 Fax:33(0)475850363 Email:lb@matechpaper.com Contact:lb@matechpaper.com
ROPE DRIVE PACKAGE The rope drive package is used to drive a set of ropes independent of the machine roll, in coating station, size press and reel sections. Extends rope and equipment life rope system can be shutdown or crawl when not in use. Safer threading system. Drive sheave with a double or triple wrapped arrangement for insure sufficient drive force and avoid rope slippage. Custom designed to meet the customer s needs in one, two or three rope configurations. Supplied with or without gearbox, motor, control and protection guards. Forfurtherinformationpleasecontactus: MATECHPAPER2008 QuartierLauveBlancs 07800SaintLaurentduPape France Tel:+33(0)475853726orFax:+33(0)475850363 Tél.:33(0)475853726 Fax:33(0)475850363 Email:lb@matechpaper.com Contact:lb@matechpaper.com
BOW PULLEY ASSEMBLY System installed for build an independent rope driven system and modify the fixed groove of the dryer in a freewheeling pulley. Tight paper tail grip special "V" shape groove design. Easy to install spitted and bolted on the machine frame. Easy & fast maintenance complete access to rope sheave for grease feeding, repair, examination or replacement. Low pulley bearing contamination System mounted with rope pulleys having a special sealed bearing mounting. MATECH paper fitters can set up this equipment on your paper machine. Forfurtherinformationpleasecontactus: MATECHPAPER2008 QuartierLauveBlancs 07800SaintLaurentduPape France Tel:+33(0)475853726orFax:+33(0)475850363 Tél.:33(0)475853726 Fax:33(0)475850363 Email:lb@matechpaper.com Contact:lb@matechpaper.com
Fig.1: MATECH Paper downward tail Nip design.
Doyouneedtodecreasethreadingtime? Doyouneedtoimproveworksafety? Doyouwantasecondopiniononanongoingproject? Areyoujustcurious? CallMATECHPaper QuartierLauveBlancs 07800SaintLaurentduPape France Tèl:+33475853726 Fax:+33475850363 Email:lb@matechpaper.com www.matechpaper.com