Double Rotary Tablet Press. (Pharma Press Gmp Model) Instrumented Tablet Press (Pharma Press-II)
|
|
- Noah Palmer
- 7 years ago
- Views:
Transcription
1 Press (Pharma Mega Press Gmp Model) Press (Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model Press (Pharma Mega Press Gmp Model) Available i.e "D", "B" and "BB" Tooling Turret with lower Punch seal Safety interlocking for Upper & Lower Guard Gravity Feeding System Two Piece Turret Upper Roller with Penetration Adjustment System Control Panel with By pass Switches Control Panel with Separate display for Tablet Count and RPM Fixed Hopper with slide to control power flow Hand Wheel Provided Re-designed variable speed pulley Turret of SRIRON 400/12 grade casting Auto Lubrication with timer & metering cartridges Cam tracks & pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up of Phosphor Bronze Machine is totally enclosed i.e top half of the machine (Compression zone) with SS hood, acrylic covers in G. M. P model. This reduce the noise level and to & fro flow of dust between compression zone and machine room Higher Turret speed 15 to 35 RPM Phosphor bronze bush provided inside the turret hold SS Turret Guards Lower Punch Cam can be removed without dismantling Lower Roller Assembly
2 Optional Features Double layer attachment Turret With Electro Nickel including Nickel Die Plate Upper Punch Cup seals Lower Punch key way for break-he/embossing Alignment Technical Specifications Model PT-D-D4 D DR PT-B-B4 B DR Stations Tooling D B BB PT-BB4 BB DR Depth of Fill Max mm mm mm Output/HR(Min. Max) Turret RPM (Min./ Max) Max. Compression Pressure Upper Punch Penetration 52200/ / / /35 15/35 15/ KN (10 Ton) 100 KN (10 Ton) 65 KN (6.5 Ton) 1.50/8.00 mm 1.50/8.00 mm 1.50/8.00 mm Diameter of Die mm mm mm Length of Die mm mm mm Diameter of Punch 25.4 mm 25.4 mm 19.5 mm Length Punch mm mm mm Electric Motor Machine Size in mm 2.2 KW(3HP), 960 RPM 1040 x 880 x KW(3HP), 960 RPM 1040 x 880 x 1342 Net weight in Kg Gross weight in Kg KW(3HP), 960 RPM 1040 x 880 x 1342 Case size in mm 46" x 46" x 51" 46" x 46" x 51" 46" x 46" x 51"
3 Press (Pharma Press Gmp Model) Press(Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model Press (Pharma Press Gmp Model) Available i.e "D", "B" and "BB" Tooling Turret with lower punch seal Safety interlocking for Upper & Lower Guard Gravity feeding system Two Piece Turret Upper Roller with Penetration Adjustment System Control Panel with Bypass Switches Control Panel with separated display tar Tablet Count and RPM Fixed Hopper with slide to control powder flow Hand wheel provided Re-designed variable speed pulley Turret of SGIRON 400/12 grade casting Worm is made up of Phosphor Bronze Machine is totally enclosed Le top half of the machine with SS hood, acrylic covers in G.M.P model. This reduce the noise level and to & fro low of dust between compression zone and machine room Higher turret speed 15 to 35 RPM Phosphor bronze bush provide inside the turret hole SS Turret Guards Optional Features Double layer attachment Turret with Electro less Nickel plating including Nickel Die Plate Upper Punch Cup seals Lower Punch key way for break-line/embossing Alignment
4 Technical Specifications Model Stations Tooling D B BB BB Depth of Fill Max. Output / HR (Min. Max) Turret RPM (Min./Max) Max. Compression Pressure Upper Punch Penetration Diameter of Die PT-D-D4 D DR PT-B-B4 B DR PT-B-BB4 BB DR PT-B-BB4 BB DR mm mm mm mm 45000/ / / / /35 15/35 15/35 15/ KN (10 Ton) 65 KN (6.5 Ton) 65 KN (6.5 Ton) 65 KN (6.5 Ton) 1.50/8.00 mm 1.50/8.00 mm 1.50/8.00 mm 1.50/8.00 mm mm mm mm mm Length of Die mm mm mm mm Diameter of Punch 25.4 mm mm mm mm Length Punch mm mm mm mm Electric Motor Machine Size in mm Net weight In Kg. Gross weight In Kg Case Size in mm 2.2 KW(3HP), 960 RPM 2.2 KW (3HP), 960 RPM 2.2 KW(3HP), 960RPM 2.2 KW(3HP), 960 RPM 993x830x x830x x830x x830x " x 46" x 51" 46" x 46" x 51" 46" x 46" x 51" 46" x 46" x 51"
5 Press(Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model Available i.e. "D", "B" and"bb"tooling Turret with lower punch seal Safety interlocking for Upper& Lower Guard Gravity Feeding System Two Piece Turret Upper Roller with Reflection Adjustment System Control Panel With Bypass Switches Control Panel with Separate display for TAB LET COUNT and RPM Fixed Hopper with slide to control power flow Hand Wheel Provided Re-designed variable speed pulley Turret of 5GIRON40G/12grade casting Cam tracks & pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up of Phosphor Bronze. Machine is total enclosed i.e. top half of the machine (Compression zone) with SS hood, acrylic covers in G.M.P model. This reduce the noise level and to&fro flow of dust between compression zone and machine room. Phosphor bronze bush provide inside the turret hold SS Turret Guards Lower Punch Cam can be removed without dismantling tie Lower Roller Assembly
6 Optional Features Turret with Electro less Nickel plating including Nickel Die Plate Upper Punch Cup Seals Lower Punch Key Way for break-line/embossing Alignment Technical Specifications Model PT-D-D4 D SR PT-D-D4 D SR Stations Tooling D D Maximum Depth of Fill Max mm mm Output / HR (Min. max) 14400/ /42000 Turret RPM (Min / Max) 15/35 15/35 Max. Compression Pressure 100 KN (10 Ton) 100 KN (10 Ton) Upper Punch Penetration 1.50/8.00 mm 1.50/8.00 mm Diameter if Die mm mm Length of Die mm mm Diameter of Punch 25.4 mm 25.4 mm Length Punch mm mm Electric Motor 1.5 KW(2HP), 960 RPM 1.5 KW(2HP), 960 RPM Machine Size S in mm 1000 x 950 x x 950 x 1300 Net Weight in Kg. 960 Kg 960 Kg Gross weight in Kg Kg 1185 Kg Case size in mm 39'' x 37'' x 51'' 39'' x 37'' x 51''
7 Press(Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model High Speed tablet press without standing engineering, performance and reliability. Front and easy outside controls AC inverter variable drive for main and feeder motor. Separate control panel safe against electric short Circuit during steam wash. Auto lubrication with fine tuning valve and timer. Extremely robust quality engineering, house in an easily accessible cabinet. Simple and convenient operation, operator protection, cleanliness and ease of maintenance. All the tablet parameters can be fine tuned during the operation of the machine from outside the tableting zone.
8 Technical Specifications Model Tablet Output /Hour * MIN (Max.) Max. Depth of Filling In MM Max. Turret Speed Max. Force Feeder Speed Max. Operating Pressure (Final Compression) Max. Operating Pressure (Pre Compression) Main Motor Force Feeder Motor Machine Dimension In on (L X B X H) Net Weight In kg. Gross s Weight in kg (Approx) PT 37 D / PT 45 DB PT 45 B PT 55 BB / / / HP / 1500 RPM, 3 PH 0.25HP/1350 RPM, 3Ph 115 X 115 X 115 5HP / 1500 RPM, 3 PH 0.25HP/1350 RPM, 3Ph 115 X 115 X 115 5HP / 1500 RPM, 3 PH 0.25HP/1350 RPM, 3Ph 115 X 115 X 115 5HP / 1500 RPM, 3 PH 0.25HP/1350 RPM, 3Ph 115 X 115 X / / / /2500
9 Press (Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model I) 21 CFR Part II Compliant. Control Panel with Touch Screen. Working on AWC (Automatic Weight Control Principle) Compression Force detection. Tablet Rejection Assembly. Separate display for Rejected Actual Tablet Count Speed Control by Frequency Drive. User Friendly interface. Windows based Software. High Speed Processing. All electronics parts enclosed in SS Cabinet Hardware Lock for each Machine. Machine stops in case of overload to prevent damage to Load cells. Display of RPM Tablet Count, Compression force, Ejection force, Rejected Tablet Count. Graphical Display. Recipe & Batch system facility provided.
10 CE Approved Press(Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model CE Approved Available i.e. "D", "B" and "BB" Tooling Turret with lower punch seal Safety interlocking for Upper& Lower Guard Gravity Feeding System Two Piece Turret Upper Roller with Reflection Adjustment System Control Panel With Bypass Switches Control Panel with Separate display for TAB LET COUNT and RPM Fixed Hopper with slide to control power flow Hand Wheel Provided Re-designed variable speed pulley Turret of 5GIRON40G/12grade casting Cam tracks & pressure rolls made out of alloy steel for maximum wear resistance and long life. Worm is made up of Phosphor Bronze. Machine is total enclosed i.e. top half of the machine (Compression zone) with SS hood, acrylic covers in G.M.P model. This reduce the noise level and to&fro flow of dust between compression zone and machine room. Phosphor bronze bush provide inside the turret hold SS Turret Guards Lower Punch Cam can be removed without dismantling tie Lower Roller Assembly
11 Optional Features Turret with Electro less Nickel plating including Nickel Die Plate Upper Punch Cup Seals Lower Punch Key Way for break-line/embossing Alignment
12 CE Approved Press(Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model CE Approved Available i.e. "D", "B" and "BB" Tooling Turret with lower punch seal Safety interlocking for Upper& Lower Guard Gravity Feeding System Two Piece Turret Upper Roller with Penetration Adjustment System Control Panel with Bypass Switches Control Panel with separated display for Tablet Count and RPM. Fixed Hopper with slide to control powder flow. Hand wheel provided Re-designed variable speed pulley Turret of SGIRON 400/12 grade casting Auto Lubrication with Timer and Metering cartridges Cam tracks & pressure roller made out of alloy steel for maximum wear resistance and long life. Worm is made up of Phosphor Bronze Machine is total enclosed i.e. top half of the machine (Compression zone) with SS hood, acrylic covers in G.M.P model. This reduce the noise level and to & fro flow of dust between compression zone and machine room. Phosphor bronze bush provide inside the turret hold. SS Turret Guards. Lower Punch Cam can be removed without dismantling tie Lower Roller Assembly.
13 Optional Features Double layer attachment Turret with Electro less Nickel plating including Nickel Die Plate. Upper Punch Cup Seals. Lower Punch Key Way for breakline/embossing Alignment.
14 Press (Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model Available in "B^'D" Tooling in both models Turret speed up to 40 RPM Centrally driven slotted turret fitted with thrust bearing AC Inverter Drive for main motor Low noise level User-friendly access Operatorsafety through upperguard interlocking Technical Specifications Type PT-D-8 PT-B-10 Type of Toolling "D" "B" No. of Station 8 Stn. 10 Stn. Max Operating Pressure 6 Ton 6 Ton Max Tablet Diameter 23.0 mm 16.0 mm Maximum Depth of Fill 20.0 mm 17.4 mm Output / HR (Min. max) 48000/ /18000 Turret RPM (Min / Max) Die Diameter mm mm Die Lenght mm mm Punch Diameter mm mm
15 Punch Lenght mm mm Electric Motor 2 HP/1440 RPM 2 HP/1440 RPM Net Weight in Kg. 280 Kg 280 Kg Gross weight in Kg. 360 Kg 360 Kg Machine Size in mm 460 x 550 x x 550 x920 Case size in mm 600 x 700 x x 700 x 1020
16 Press (Pharma Mega Press Gmp Model) CE Approved Double Rotary Tablet Press GMP Model Press (Pharma Press Gmp Model) Rotary Tablet Press GMP Model Available in "B & 'D" Tooling in both models Turret speed up to 40 RPM AC Inventor Drive for main motor Centrally driven slotted turret fitted with thrust bearing Low noise level. Force Feeder with A. C drive User-friendly access. Operator safety through upper guard Interlocking Inbuilt Pre-Compression Adjustable upper pun ch penetration Optional Features All controls are outside the machine PLC system SCADA system Turret fully Electrode less Nickel Plated
17 Technical Specifications Type PT-D-8 Type of Toolling "D" "B" PT-B-10 No. of Station 8 Stn. 10 Stn Max Operating Pressure 6 Ton 6 Ton Max. Pre-compression pressure 1 Ton 1 Ton Max Tablet Diameter 23.0 mm 16.0 mm Maximum Depth of Fill 20.0 mm 17.4 mm Output / HR (Min. max) 4800/20, /25,200 Turret RPM (Min / Max) Die Diameter mm mm Die Lenght mm mm Punch Diameter mm mm Punch Lenght mm mm Electric Motor 2 HP/1440 RPM/ 3 PH 2 HP/1440 RPM/ 3 PH Feeder Motor 0.25 HP/ 1440 RPM/ 3 PH Net Weight in Kg. 280 Kg 280 Kg Gross weight in Kg. 360 Kg 360 Kg 0.25 HP/ 1440 RPM/ 3 PH Machine Size in mm 460 x 550 x x 550 x920 Case size in mm 600 x 700 x x 700 x 1020
XL 200. Pharmaceutical Rotary Press. For Mid-Range Production
XL 200 Pharmaceutical Rotary Press For Mid-Range Production Innovations Made in Berlin Since 1919 Focus Drives Perfection Specialization is the key. Since 1919, KORSCH has focused on its core competency
More informationPharmaceutical Rotary Presses. PharmaPress 800. High Speed Double Rotary Press
Pharmaceutical Rotary Presses PharmaPress 800 High Speed Double Rotary Press Highest Output with... The KORSCH PharmaPress 800 is a high capacity, double sided tablet press for fully automated and unattended
More informationManual for GlobePharma Mini-Press II Rotary Tablet Press
1 of 13 Preparing the Rotary Press 1. Make sure the rotary press is unplugged. 2. Open the bottom cabinet of the rotary press and take out the grey tool kit, and the beige box of punches and dies. 3. Take
More informationMACHINE SCREW ACTUATORS 2 to 100 Tons
2 to 100 Tons Top Plate 316 S.S. Must be bolted to lifting member to prevent rotation except when screw is keyed. Lifting Screw 316 S.S. Also available as threaded end or clevis end. Shell Cap 316 S.S.
More informationMODEL HSR-007 Direct Drive Rolling Steel
MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationINDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
More information6731 20 pg Fette Pocket Guide 7/24/07 2:40 PM Page 1 FETTE AMERICA
FETTE AMERICA Table of Contents Page Help Text 1 Weight Control 2 Tablet Press Operation 3-4 Fine Tuning 5-6 Features for New Users 7 Troubleshooting 8-11 Controls Overview 12-13 Reference Data / Quick
More informationThe Director Software V4 and the Scalability Tool
The Director Software V4 and the Scalability Tool Small bench top tablet presses can be used to successfully transfer a product into larger production machines provided that the proper tooling and speeds
More informationTool Turrets and Tool Discs
Our other products Automatic Tool Changer Chucking Cylinders Tool Discs Indexing Tables Tool Turrets and Tool Discs Pragati Automation Pvt. Ltd. 1, IV Phase, 11th Cross, Peenya Industrial Area Bangalore
More informationRotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
More informationDUGARD. DUGARD Machine. Dugard Heavy Duty Vertical Machining Centres. Machine Tools That Create Solutions Since 1939. Tools
DUGARD Machine Tools That Create Solutions Since 1939 Dugard Heavy Duty Vertical Machining Centres DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 The unique inverted slideway design
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationRoller Chain Coupling
Roller Chain Coupling Features 1. Simple structure A roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving
More informationPrecise heavy-duty cutting
PR 130 / PR 150 / PR 160 / PR 180 / PR 200 / PR 260 Precise heavy-duty cutting P-SERIES K-SERIES T-SERIES MILLFORCE 02 / Fields of application 03 / Machine concept 04 / Machine technology 05 / Options
More informationThe CLIPPER Solutions
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
More information1300 MAXTRAK SPECIFICATION
CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having
More informationSET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY
SET-UP AND INSTALLATION FOR LEAD SCREW CARTRIDGE ASSEMBLY 82-13-1 O-Ring (Rear) The Lead Screw Assembly is shipped separately. Note: Install Electrical and Pneumatic Circuitry. Be Sure electrical and pneumatic
More informationTube Type Oil Skimmer Comparison
Process Overview- Tube Type Oil Skimmers Oil flows down the face of the skimmer and into a sludge pan that is plumbed to a barrel. Model BG01 & BG34 or 6V Oil Skimmer 1.0 or 3/4 Diameter Collector Tube
More informationPolishing and finishing barrels BTV
Polishing and finishing barrels BTV Polishing barrels for buttons, products in polyester, urea, galalith and related item. Strengthened model with rubber lining for finishing of metallic minuteness. Steel
More informationTABLE-TYER / TABLE-TYER SS POWER STRAPPING MACHINES 04/12/07
TABLE-TYER / TABLE-TYER SS POWER STRAPPING MACHINES 04/12/07 CONGRATULATIONS Thank you for purchasing your Table-Tyer Strapping Machine. The Table-Tyer has been designed to be a reliable, maintenance free
More informationBelt Conveyor System
Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed
More informationTABLETTING BUYER S GUIDE
TABLETTING BUYER S GUIDE THE KEY QUESTIONS YOU NEED TO ASK BEFORE BUYING A TABLET PRESS TABLETTING BUYER S GUIDE THE KEY QUESTIONS YOU NEED TO ASK BEFORE BUYING A TABLET PRESS Buying a tablet press is
More informationReplacement spare parts for COURTOY tablet compression equipment
Replacement spare parts for COURTOY tablet compression equipment INTERNATIONAL INVENTORY MANAGEMENT 456 MANNING AVENUE ELON, NC 27244 TEL 001 336 584 4777 FAX 001 336 584 9540 410 NORTH 1650 WEST SPRINGVILLE,
More informationMultiple Tip Tooling. Durability, Productivity, Longevity. MKT-45 Issue 4
Multiple Tip Tooling Durability, Productivity, Longevity. MKT-45 Issue 4 T A B L E T T I N G S C I E N C E Contents DESCRIPTION PAGE Introduction 4 Benefits 5 Multi-Tip or Micro-Tip 6 MULTIPLE TIP CONFIGURATION
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationINSTRUCTION MANUAL AND PARTS LIST MODEL 14-10
VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data
More informationStock List: >>Offset- Printing Machines
>>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional
More informationOffer No: 156/2010. Date: December 17, 2010. Dear gentlemen,
CONSTRUCTION MACHINES PRODUCTION PAGE 1 PROMETAL S.R. Milosava Vlajića 49 11450 Sopot Serbia EUROPE Tel. +381.63.133.44.56 +381.63.8623.758 Fax +381.11.283.41.39 web site: bank: Raiffeisen Bank Serbia
More informationMINSTER SERIES P2. Piece-Maker BULLETIN 130B
MINSTER SERIES P2 Piece-Maker BULLETIN 130B MINSTER SERIES P2 Automatic Straight Side Presses Every operation involved in the building of a Minster Piece-Maker press, from pouring of castings to final
More informationheat treatment equipment & accessories
heat treatment equipment & accessories INDUSTRIAL FURNACES Dear Customer, ElectroHeat Sweden AB is an innovative company based in Gothenburg, Sweden, and has been operating since 1975. We manufacture industrial
More informationThe conditions below apply to the curves shown on the following pages.
GENERAL INFORMATION STAINLESS STEEL, SILVERLINE, EVERGREEN & GOLDLINE SERIES PERFORMANCE CURVE CONDITIONS The conditions below apply to the curves shown on the following pages. a. The Performance curves
More informationElectric Flow Boiler
Electric Flow Boiler EHC offer the most comprehensive range of electric boilers in the market and with our wealth of knowledge and technical expertise we have designed the Slim Jim Electric Flow Boiler
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationNAGEL ECO 180 FLEXIBLE HONING SYSTEM
NAGEL ECO 180 FLEXIBLE HONING SYSTEM NEW DEVELOPMENT For Small and Medium Production Runs In-process gauging, Roughing and finishing in a single spindle Tel: 734-426-1812 www.nagelusa.com MACHINE HIGHLIGHTS
More informationCommercial Gas Furnace Upflow
Commercial Gas Furnace Upflow Model G24-200 80% A.F.U.E. 200,000 Btuh Input Heating Cap. 7.5 or 10 Tons Nominal Add-On Cooling GUK FEATURES Certified by A.G.A./C.G.A. Laboratories. Heavy gauge painted
More informationProduct Data Sheets. Belt Conveyor System
Product Data Sheets Belt Conveyor System Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited s range of powered belt conveyors is designed
More informationSPECIFICATIONS FOR TENDER NO: PSNR/SCP/VKS/E 1635 ANNEXURE I TECHNICAL SPECIFICATIONS FOR LIGHTING HIGH MAST
TECHNICAL SPECIFICATIONS FOR LIGHTING HIGH MAST ANNEXURE I Sl.No. Description for BHEL Requirement Offered Deviation Scope of supply, erection and commissioning: 1 The scope of this specification covers
More informationTypical TIG-plasma solutions
Typical -plasma solutions 2228-005 2003-670 Boilers maker solutions 2004-257 1210-064 1210-067 64 3638-008 2008-400 1415-014 2000-169 2003-204 1467-003 2000-343 2000-160 Pipework solutions or plasma welded
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationManual piston sampler...m 11
SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr
More informationHigh Security Heavy Duty Shredders VZ 14.00. Perfect shredding and high performance in DIN security levels 4 and 5
High Security Heavy Duty Shredders Perfect shredding and high performance in DIN security levels 4 and 5 Documentation High Security Heavy Duty Shredders / Page 1of 5 Perfect shredding and high performance.
More informationCNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines
The World Wide partnership for ultimate turning technologies CNC and conventional high quality, large, powerful and heavy duty horizontal lathes and grinding machines a brief outline of vertical machines
More informationPipe Cutting and Beveling Clamshells
Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international
More informationQP-2040L CNC VERTICAL MACHINING CENTER
Page 1 of 8 QP-2040L CNC VERTICAL MACHINING CENTER Page 2 of 8 MACHINE FEATURES: This fully upgradeable VMC is designed to accommodate various upgrades in the future so that it can be reconfigured for
More informationSeries 8146/5-V37 and Series 8150/5-V37
www.stahl.de > Clear assignment safe technology easy installation > Intelligent structure only one rotary actuator for frequency-controlled drives ) 20 ms leading auxiliary contact for safe motor disconnection
More informationDUGARD. Machine Tools Since 1939. Dugard ECO Series Driven Tool, Slant Bed CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 ECO Series Driven Tool, Slant Bed CNC Lathes www.dugard.com ECO Series - CNC Lathes Amazing speed, power, precision and durability all at an affordable price Rigid and Trustworthy
More informationmotion solutions for leisure, mobility and industrial applications www.parvalux.com
motion solutions for leisure, mobility and industrial applications www.parvalux.com designed for application bespoke DC gear-motor solutions 2 STAIR LIFT unique worm-spur double reduction gearbox delivering
More informationAMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12
AMADA MODULAR FLEXIBLE MANUFACTURING CELL ASL250 + VIPROS 358K + ASPR250-UL + SS12 As At 08/01/03 1. OVERVIEW Amada Modular Flexible Manufacturing Cell The proposal enclosed is for a fully Automated, flexible
More information19" GERMANY EXPORT RACK QUALITY PRODUCT FOR THE BEST WORK NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN
NEW DESIGN CABLE MANAGEMENT PANEL WALL RACK CABINET 15 U VENTILATING FAN AC SOCKET STRIP (AC Power Distribution) BLANK PANELS x U OPEN RACK THERMOSTAD PANEL SET CABLE MANAGEMENT PANEL WITH COVER BAYING
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationModel 362A AURORA. 340A/360A Series SINGLE STAGE END SUCTION PUMPS. www.aurorapump.com
Model 62A MODEL 41A MODEL 44A AURORA 40A/60A Series SINGLE STAGE END PUMPS www.aurorapump.com SINGLE STAGE END PUMPS AURORA 40A/60A Series Single Stage End Suction Pumps Capacities to 4500 G.P.M. (1022
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More informationSUSPENSION AND STEERING OVERVIEW
SUSPENSION SUSPENSION AND STEERING OVERVIEW The S40/V50 has a wide track and a long wheelbase for its relative size and weight. This gives the car stable and predictable driving characteristics. It also
More informationV&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationSpecifications 860-10000KN
Specifications 860-00 HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD ai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 201608-IV NINGBO
More informationAESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN
AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete
More informationMaxi-Stamper. 200 to 1,000 Tons STAMPING OUT DOWNTIME
TM Maxi-Stamper 200 to 1,000 Tons STAMPING OUT DOWNTIME Standard Features Steel Fabricated Construction Drive Capacity Rated 1/2 Above Bottom of Stroke Self-Diagnostic Solid State Controller Moveable Operator
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationControl blocks for two-hand start ZSB
Key features Function This pneumatic control block for twohand start ZSB is used where a manually started operation, such as the triggering of compressed air cylinders, would otherwise involve danger for
More informationTagliarisme Idraulico IBM5780IBM
Tagliarisme Idraulico IBM5780IBM 1. Introduction High quality casting part made by resin bonded sand way. Four optional computer system.( high capacity of program, precise position resolution, strong malfunction
More informationPump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages
Pump Specifications 2448LSG, 2448LSGX Series Omnivore 2HP Simplex Grinder Packages 2448LSG_P1 R4/2/2012 Copyright 2012 Liberty Pumps Inc. All rights reserved. Specifications subject to change without notice.
More informationPC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
More informationhttp://www.i-max.top
http://www.i-max.top Intelligent NC. Simple to operate, like a press. Requires no special skill Secure clamping of complex shapes Multi-task machining without reclamping Program supply system for quick
More informationa text description. The machine can also be remote controlled by Ftp- connection. Teleservice by our technicians via
Model RWS-Evolution The RWS-Evolution is the high end floor toroidal winding from RUFF. The new controller with innovative programming is user friendly and through the high resolution touch screen display
More informationPREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS
SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These
More informationT 300 Tray sealer. Automatic tray packaging in the smallest of spaces
T 300 Tray sealer Automatic tray packaging in the smallest of spaces MULTIVAC T 300 T 300 Tray sealer: Automatic tray packaging in the smallest of spaces The especially compact T 300 tray sealer packs
More informationOperating Instructions Drill rig DRU160
Operating Instructions Drill rig DRU160 Index 000 / 001 Original operating instructions 10988825 en / 20.10.2009 Congratulations! With a Hydrostress unit from TYROLIT you have chosen a tried and tested
More informationEquipment Information
3002A Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)
More informationSECTION G2: CABLE PROCESSOR MODULE MAINTENANCE
SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE Cable Processor Module overview WARNING! When tipping the Cable Processor Module back, (after removing the toggle arm pin), use extreme caution not to drop
More informationSHARP SVL 4525 LINEAR WAY VERTICAL MACHINING CENTER
SHRP SVL 4525 LINER WY VERTICL MCHINING CENTER PRECISION MCHINE TOOLS Sharp Industries, Inc. 3501 Challenger Street Torrance, C 90503 Tel 310-370-5990 Fax 310-542-6162 Email: info@sharp-industries.com
More informationUltrasonic Welding Solutions. plasquip.com.au
Ultrasonic Welding Solutions Whatever the volume or scope of your manufacturing operations, talk to PLASQUIP SALES today about a Ultrasonic Welding solution that will not only meet but also exceed your
More informationCustomer: Cardiff Hospital NHS (United Kingdom) Machine:
Customer: Cardiff Hospital NHS (United Kingdom) Machine: Bench for leak test Model: Easy TS Page 1 of 7 Date: 6 th March 2012 1. Introduction. Easy TS is a compact and reliable table top bench designed
More informationDUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationModel No. 4 Vertical Mixer 9 Screw Feeder Inlet 69196-H15400, May 1999 (#72-200-60-12)
The Model Number 4 Kelly Duplex Vertical Mixer has a gross vessel capacity of 200 cubic feet and a nominal batch working capacity of 170 cubic feet. This mixer features a 60 degree cone, a 12 inch diameter
More informationEurovacuum EV Series. Single Stage Oil Sealed Rotary Vane Pump
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
More information2. Crane standing on firm, horizontal ground.
The operating weight includes the basic machine with HD undercarriage, 2 main winches 300 kn with speed change gear and 11 m boom, consisting of A frame, boom foot (4 m), boom head section (6.4 m), boom
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationTELESCOPE Motorized Lighting Suspension
TELESCOPE Motorized Lighting Suspension Mod. 8400 FEATURES The De Sisti TELESCOPE is a single point suspension specifically designed to provide rigidity and stabilization of all moving parts. It can extend
More informationMachining Center MODEL: VH-610 MACHINE FEATURES
Machining Center MODEL: VH-610 MACHINE FEATURES 10HP Spindle Motor, CAT40 Spindle Taper 8000 rpm spindle speed ( Optional 10,000 or 12,000 rpm ) Super grade Turcite-B On X/Y/Z Slideways Hardened & Ground
More informationSUNON SPECIFICATION FOR APPROVAL DESCRIPTION : DC BRUSHLESS FAN. DIMENSIONS : 60X60X15 mm M O D E L : KD0506PHS2
SPECIFICATION FOR APPROVAL CUSTOMER : DESCRIPTION : DC BRUSHLESS FAN DIMENSIONS : 60X60X15 mm M O D E L : KD0506PHS2 APPROVED NO : APPROVED BY : (AUTHORIZED) SPEC.NO D600023 ISSUE DATE 08.06.1998 DAWN.
More informationFlows to 18 GPM. Pressure to 100 PSI
Markets Agriculture-fertilizers, pesticides Automotive-coolants, lubricants Book Mfg-adhesives, glue Construction & Mining-lubricants, fuels, coolants Filtration System Pumps-portable, stationary Food
More information2,500 3,700 lb. Spring Axles
Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel
More informationControl Components (August 2015)
Control Components (August 2015) New Generation (G4) CNC 5hp (with exchange) New Generation (G4) CNC C-axis (with exchange) 915-16-101 965-16-101 Call for special pricing Call for special pricing LCD Monitor
More information1x90 TONS TENSIONERS TECHNICAL PROPOSAL. 1 X 90 Tons 30 m/min Tensioners TECHNICAL PROPOSAL JOB 08/059. 0 19/02/2008 Basic proposal PP GM SB
Pagina N.: 1 of 19 1 X 90 Tons 30 m/min Tensioners JOB 08/059 0 19/02/2008 Basic proposal PP GM SB Rev N Date Issue Description Prepared by Checked by Approved by Pagina N.: 2 of 19 TABLE OF CONTENTS:
More informationHM325 - PRODUCTION CRIMPER
HM325 - PRODUCTION CRIMPER As a reliable classic machine, the HM325 unites all the outstanding properties of a production er. It is compact, powerful and makes ergonomic working possible. Combining a convincingly
More informationMR221-MR222 Heavy Duty Geared Limit Switches, CE Approved
MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved MICRONOR automation components Product MICRONOR MR221 and MR222 series Heavy Duty Geared Limit Switches are for use in the most demanding industrial
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationCNC Portal Milling Machine FZ 50. CNC Power Milling Technology
CNC Portal Milling Machine FZ 5 CNC Power Milling Technology FZ 5 Portal Milling Machine for Heavy Cutting The newly developed portal milling machine FZ 5 is based on a flexible machine design which can
More informationFIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES
BQ FIXED DISPLACEMENT HYDRAULIC VANE PUMPS BQ SERIES Versatility, power, compactness and low running costs are the main characteristics of B&C vane pumps. All the components subject to wear are contained
More informationHT3 series Peck Feed Drills, with Equal Drill Time
Parts Manual Ersatzteil Liste PL92-280 HT3 series Peck Feed Drills, with Equal Drill Time HT3 SERIES PECK DRILL HT 3 C 005 S E 40 RPM Family Spindle B = 1/2-20 Male Thread, Jacobs Chuck C = 3/8-24 Female
More informationQuality control: Annex-A.
Quality control: Quality of the constructed work has been checked by our staff as per frequency and provision mentioned section 900 in MoRT&H and as per provision mentioned in Concession Agreement. The
More informationCNC Vertical Machining Center V-Mill CNC Large box-way and linear guide way machines
CNC Vertical Machining Center Large box-way and linear guide way machines Technical Datasheet CNC Vertical Machining Center Large box-way and linear guide way machines Spindle gear drive (50-taper) for
More informationSignature Norman Crepeau Special Condition Subject to prior sale Johnford ST60B. CNC Turning Center
Mr. Will Rood B & B Precise Products 25 Neck Road Benton, ME 04901 Date June 3, 2008 Quote # 06032008 Valid for 30 Days Quoted by Norman Signature Norman Crepeau Special Condition Subject to prior sale
More information