C11 SIDE HUNG WINDOWS C11.14 01.01.2017 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com
C11.14 CONTENTS 1. General...C11.14.03 2. Size range... C11.14.04 3. Chrono visible hinges...c11.14.05 3.1. Standard hinges n 26140-750 and 26140-760 C11.14.05 3.2. Adjustable hinges C11.14.06 3.3. 2-part and 3-part hinges C11.14.07 4. Chrono Invision Pro hinges... C11.14.08 4.1. Hinge sets C11.14.08 4.2. Installation of hinges C11.14.09 4.3. Adjustments of hinges C11.14.10 5. Chrono Invision Go hinges...c11.14.12 5.1. Hinge sets C11.14.12 5.2. Installation of hinges C11.14.13 5.3. Adjustments of hinges C11.14.15 C11.14.02
C11.14 1. General The totally clampable Chrono turn system is available with visible hinges and with concealed hinges. The concealed hinges offer the following advantages: --The concealed hinges have the advantage that the hinges are invisible when the window is closed. --The possibility to use a narrow frame profile: aesthetic aspect and glass surface will be larger. --The cleaning of the window frames will be easier because all the corners are easily accessible. --Colour-independent, so reducing stock and increasing cost effectiveness. -- No need to remove the inner gasket to mount the hinges. A better acoustic, wind and water tightness is obtained. -- The fully concealed hinges can not be damaged or spoilt during transport, installation or other work to the building. The concealed hinges are available in two different versions: --Chrono Invision Pro: fully concealed clampable hinges, which can carry vent weights up to 170 kg. --Chrono Invision Go: fully concealed clampable hinges, which can carry vent weights up to 90 kg. All parts are made of non-corroding materials. Profile dimensions Chrono hardware is available to suit a frame groove of 14/18 mm or a frame groove of 10/14 mm. Chrono Invision Pro Chrono Invision Go Frame groove 14/18 mm Frame groove 10/14 mm A 14 ± 0.5 10 ± 0.5 B 18 ± 0.5 14 ± 0.5 Cut out vent profile C11.14.03
C11.14 2. Size range Chrono Size range with connection piece set: --Vent width: 400-1700 mm. --Vent height: 600-2400 mm. Size range for vent heights > 2400 mm: --Vent width: 450-1200 mm. --Vent height: 2401-2800 mm. Vent weight: max. 130 kg. Ratio of vent width Fb / vent height Fh = max. 1,5. Size range with lockcase: --Vent width: 400-1700 mm. --Vent height: 685-2400 mm. Chrono Invision Pro Size range with connection piece set: --Vent width: 400-1700 mm. --Vent height: 600-2400 mm. Size range for vent heights > 2400 mm: --Vent width: 460-1200 mm. --Vent height: 2401-2800 mm. Vent weight: max. 170 kg. Ratio of vent width Fb / vent height Fh = max. 1,5 (< 130 kg). Ratio of vent width Fb / vent height Fh = max. 1 (> 130 kg). Size range with lockcase: --Vent width: 400-1700 mm. --Vent height: 685-2400 mm. Chrono Invision Go Size range with connection piece set --Vent width: 400-1300 mm. --Vent height: 600-2400 mm. Size range for vent heights > 2400 mm: --Vent width: 460-1200 mm. --Vent height: 2401-2800 mm. Vent weight: max. 90 kg. Ratio of vent width Fb / vent height Fh = max. 1,2. Size range with lockcase: --Vent width: 400-1300 mm. --Vent height: 685-2400 mm. Remarks Dimensions out of standard range on request! C11.14.04
C11.14 3. Chrono visible hinges 3.1. Standard hinges n 26140-750 and 26140-760 General Vent width Fb = 400-1400 mm. Vent weight < 90 kg. Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours). Top hinge n 26140-750 1 4200-150.3 hinge pin 2 4200-150.6 bush 1 26000-750-4 clamping plate vent part 1 26140-760-1 frame part 2 30140-760-3 cap 1 35000-760-1 vent part 2 35000-760-3 screw vent part Bottom hinge n 26140-760 1 4200-150.3 hinge pin 2 4200-150.6 bush 1 26000-760-4 clamping plate vent part 1 26140-760-1 frame part 2 30140-760-3 cap 1 35000-760-1 vent part 2 35000-760-3 screw vent part Preparations C11.14.05
C11.14 3.2. Adjustable hinges General Vent width Fb = 400-1700 mm. Vent weight < 130 kg. Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours). Top hinge n 26140-751 1 20000-751-1 vent part 1 20000-751-3 clamping plate vent part 2 M5x10TFL DIN965 screw vent part 1 30140-750-2 hinge pin 1 35140-750-1 frame part >90kg and/or Fb>1400mm Bottom hinge n 35140-760 1 30000-760-2 hinge pin 1 30140-760-2 adjustment bearing piece 1 30140-760-3 cap 1 35000-760-1 vent part 2 35000-760-3 screw vent part 1 35000-760-4 clamping plate vent part 1 35140-760-1 frame part Reinforcement set n 35140-790 (>90kg and/or Fb>1400mm) 1 35140-790-1 reinforcement piece 2 30140-790-2 screw Hinge wedge n 20140-752 Plate n 30000-760-5 for supporting adjusting screw (order separately) Preparation Preparation hinges C11.14.06
C11.14 Preparation reinforcement set For windows with vent weight between 90 kg and 130 kg and when Fb > 1400 mm the reinforcement set n 35140-790 must be used to reinforce the adjustable top hinge. The M4x10 thread forming screws must fix into at least 6 mm of aluminium. Drilling jig n 35000-955 is available for drilling the holes. 3.3. 2-part and 3-part hinges 4208-220 and 4208-221 Vent width Fb = 400-1000 mm. Vent weight < 75 kg. 4208-320 and 4208-321 Vent width Fb = 400-1200 mm. Vent weight < 80 kg. Order number 4208-220 4208-221 4208-320 4208-321 G 4.5 5 4.5 5 Fh = max. 1200mm 2 hinges Fh = 1200-1800mm 3 hinges Fh = 1800-2400mm 4 hinges Finish: aluminium anodised or polyester powder coated (more than 450 RAL colours). C11.14.07
C11.14 4. Chrono Invision Pro hinges 4.1. Hinge sets Hinge set for frame groove 14/18 mm Hinge set for frame groove 10/14 mm and/or and/or Right hand = illustrated Left hand = opposite view and/or Right hand = illustrated Left hand = opposite view and/or Hinge set n 23114-10R(L) 1 23114-770R(L) top hinge 1 32114-780R(L) bottom hinge Reinforcement set n 32140-790 (>130kg and/or Fb>1400mm) 1 32140-790-1 reinforcement piece 1 St4.2x13Din7504P screw Hinge wedge n 20140-752 Hinge set n 23134-10R(L) 1 23134-770R(L) top hinge 1 32134-780R(L) bottom hinge Reinforcement set n 32130-790 (>130kg and/or Fb>1400mm) 1 32140-790-1 reinforcement piece 1 32130-790-1 stop Hinge wedge n 20140-752 For weights > 130 kg the reinforcement set n 32140-790 (for frame groove 14/18 mm) or 32130-790 (for frame groove 10/14 mm) should be placed. Windows with a vent height Fh > 1200 mm, require an additional hinge wedge n 20140-752 at the hinge side. Windows with a vent height Fh > 1800 mm, require two additional hinge wedges n 20140-752 at the hinge side. C11.14.08
C11.14 4.2. Installation of hinges Fixing vent part of bottom hinge Fb > 1400mm and/or Fg > 130kg Positioning and fixing top hinge on the vent n 4 Remove retaining piece Remove positioning clips after assembly Fixing frame part of the bottom hinge on the frame profile Assembly of vent and frame Press right into corner n 2.5 n 2.5 Positioning top hinge (vent) on frame profile Fixing top hinge n 2.5 Frame groove 14/18 mm Frame groove 10/14 mm n 2.5 Press right into corner n 2.5 Fixing of the drilling screw (reinforcement set 170 kg) Fixing of the stop (reinforcement set 170 kg) Installation of the reinforcement plate Fg > 130 kg and frame groove 14/18 mm Fg > 130 kg and frame groove 10/14 mm Vent weight > 130 kg C11.14.09
C11.14 4.3. Adjustments of hinges Overview adjustments Bottom hinge -- Continuous horizontal and vertical adjustment range of ±1.5 mm. -- Adjustable without releasing fixing screws and without removing the vent. --Adjustable friction device for turn mode. Top hinge -- Continuous horizontal adjustment range of +3 mm/-3 mm. Opening angle -- The maximum opening angle is adjustable on the bottom hinge (90 or 105 ). Adjustment top hinge Adjustment vent part of bottom hinge right left INSIDE INSIDE C11.14.10
C11.14 Adjustment frame part of the bottom hinge Adjustment of the friction mechanism Adjustment of the opening angle (90 to 105 ) before mounting the hinge C11.14.11
C11.14 5. Chrono Invision Go hinges 5.1. Hinge sets Hinge set for frame groove 14/18 mm Hinge set for frame groove 10/14 mm Right hand = illustrated Left hand = opposite view Right hand = illustrated Left hand = opposite view Hinge set n 23117-10R(L) 1 23117-770R(L) top hinge 1 32107-780-1R(L) vent part bottom hinge 1 32117-780-2R(L) frame part bottom hinge 1 32107-780-3 guiding piece bottom hinge Hinge set n 23137-10R(L) 1 23137-770R(L) top hinge 1 32107-780-1R(L) vent part bottom hinge 1 32137-780-2R(L) frame part bottom hinge 1 32107-780-3 guiding piece bottom hinge Hinge wedge n 20140-752 Hinge wedge n 20140-752 Vent weight = max. 90 kg. Windows with a vent height Fh > 1200 mm require an additional hinge wedge n 20140-752 at the hinge side. Windows with a vent height Fh > 1800 mm require two additional hinge wedges n 20140-752 at the hinge side. C11.14.12
C11.14 5.2. Installation of hinges Right hand window Left hand window INSIDE Installation vent part of bottom hinge Fixing vent part of bottom hinge Hook in the arm in the guiding piece and fully open the hinge to click in. Installation and fixing of the top hinge on the vent Slide in the hinge with the positioning pin up against the vent groove. PUSH! C11.14.13
C11.14 Hook in frame part of the bottom hinge on the vertical frame profile Slide downwards the frame part of the bottom hinge Fix the frame part of the bottom hinge on the frame profile PUSH! PUSH! Position clamping nut! Assembly of vent and frame Installation top hinge (vent) on frame profile Open frame part at 90 and hook in vertically behind the groove tooth (13a). Then insert in the top frame profile (13b). Fixing frame part of the top hinge Position clamping nut! PUSH! C11.14.14
C11.14 5.3. Adjustments of hinges Overview adjustments Bottom hinge -- Continuous horizontal and vertical adjustment range of ±1.5 mm. -- Adjustable without releasing fixing screws and without removing the vent. Top hinge --Continuous horizontal adjustment range of +3 mm/-3 mm. Adjustment top hinge Height adjustment vent part of the bottom hinge Horizontal adjustment frame part of the bottom hinge C11.14.15