information information
|
|
- Evangeline Russell
- 8 years ago
- Views:
Transcription
1
2
3
4
5 Technicalinformation Technicalinformation
6 technicalinformation SYSTEM 40C GENERAL GROPERTIES 1 Glazing: from 4 to 22 mm 2 E.P.D.M. Sealing Gasket 3 Efficent drainage of the vent section 4 Efficent chamber for pressure leveling which provides a better watertightness. 5 Central sealing gasket for a better wind and watertightness. 6 Proved drainage avoids infiltration of water under the central gasket. 7 Direct front chamber drainage. 8 Economic height: frame: 40mm vent: 45 mm 9 Alternatif conren cleats with pres and die cast corner joint 10 Acoustical gasket in E.P.D.M / 6063 aluminium alloy 40C ALUminium 1 EURO groove I 40C PERImetric 1 Perimetric Groove suitable for 9 axus and 20 mm hinge extruded joint is suitable for GU unijet D and Siegenia Aubi A 300 Euro Groove Section Multilock Section 40C ALUminium 40C PERImetric 04
7 technicalinformation 40C Cold window and door systems. Construction Depth Glazing * Window: Frame: 40 mmvent : 45 mm * Door: Frame: 66 mmvent :45 mm Glazing from 4 mm up to 22 mm with dry E.P.D.M. Gaskets. The choice of joints and glazing beads depends on the thickness of the glass. According to the tolerances of the glazing either a smaller or bigger joint and or glazing bead is used. Window types: inside, tilt and turn, double casement. Door types: inside door, outside door, double door, swinging door. Special Characteristics The structural profile walls have a nominal thickness of 1.2 to 1.3 mm. Curved and round windows possible. Special ventilation possibilities. Connections Gaskets Drainage Fitting and anchoring Die cast and also pres corner joints can apply for fixing corners. The transoms are fixed with screw through the outer frame. The central gasket ensures the window is wind and watertight over the complete surface. The acoustic gasket is uninterrupted. All window types must be equipped with a drainage system in the bottom profiles or the transoms. The windows and doors are fitted level and at perfectly right angles. The aluminium constructions are fixed to the brickwork in such a way that shrinkage or expansion of the building have no influence on the aluminium constructions. The aluminium profiles are made out of the alloy 6060 and The aluminium profiles have been extruded from the alloy AlMgSi 0.5F22 in according to the EN Tolerance are based on the standart EN Aluminium alloy Physical Properties 1. Density : 2.71 g / cm3 2. Elasticity module : 7000 kg / mm2 3. Resistance : 2650 kg / mm2 4. Melting point : 650 C 5. Coeffcient of expansion : 23x10 C 6. Thermal permeability : 0.48 cal / cm /s Mechanical Properties 1. Rupture strength : 23.9 kg / mm2 2. Elasticity limit : 19 kg / mm2 3. Hardness : 25 Brinell The profiles get a surface treatment as described further on.the colours of the profiles for the inside and outside are the same or different.the anodisation and enamel procedures are carried out under the responsibility of the systems supplier who offer. Surface Treatment Electrostatic Powder Coating "The thermal break allows all surface treatments when compounded.the enamel construction version has the QUALICOAT label. On average, the coating thickness is minimally 60 micron. The architect can choose from the standart range of colour of the system su" Anodised Construction Version The complete anodisation process takes place in accordance with the specifications of QUALANOD. This procedure has to be applied to all exterior joinery situated in the following zones: *In industrial or highly polluted zones. *In city centres or along busy roads. *Along railroads. *In swimming pools, laboratories, industrial buildings, etc. 05
8
9 technicalinformation Code Drawing Theoretical Weight kg/m Statics Covering Surface (cm) Jxx (cm4) Jyy (cm4) Inside Outside Code Drawing Theoretical Weight kg/m Statics Covering Surface (cm) Jxx (cm4) Jyy (cm4) Inside Outside
10 technicalinformation Code Drawing Theoretical Weight kg/m Statics Covering Surface (cm) Jxx (cm4) Jyy (cm4) Inside Outside Code Drawing Theoretical Weight kg/m Statics Covering Surface (cm) Jxx (cm4) Jyy (cm4) Inside Outside
11 technicalinformation perimetric profiles Code Drawing Theoretical Weight kg/m Statics Covering Surface (cm) Jxx (cm4) Jyy (cm4) Inside Outside Code Drawing Theoretical Weight kg/m Covering Statics Surface (cm) Jxx (cm4) Jyy (cm4) Inside Outside
12
13 Aluminiumprofiles Aluminiumprofiles
14 aluminiumprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC1127 B FUJI THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC1127 B FUJI 2000 C MO THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI
15 aluminiumprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI 2000 C MO THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI
16 aluminiumprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC1127 B FUJI THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC1127 B FUJI 2000 C MO 20 14
17
18
19 aluminiumprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI 2000 C MO THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI
20 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m
21 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m
22 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m CORNER JOINT A P THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m ADAPTER CUP EM THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m
23 aluminiumprofiles THEORETICAL WEIGHT kg/m ADAPTER CUP EM THEORETICAL WEIGHT kg/m B FUJI THEORETICAL WEIGHT kg/m
24 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m
25 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m
26 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m CORNER JOINT A M THEORETICAL WEIGHT kg/m CORNER JOINT A MO THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m CORNER JOINT A MO
27 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m
28 aluminiumprofiles THEORETICAL WEIGHT kg/m THEORETICAL WEIGHT kg/m PVC ADAPTER EM THEORETICAL WEIGHT kg/m No visible surface. 26
29 aluminiumprofiles THEORETICAL WEIGHT kg/m No visible surface THEORETICAL WEIGHT kg/m No visible surface. 27
30
31 Perimetricprofiles Perimetricprofiles
32 perimetricprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC1127 B FUJI THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI 2000 C MO 19 30
33 perimetricprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC1327 B FUJI 2000 C MO THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI 2000 C MO 20 31
34 perimetricprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC4327 B FUJI 2000 C MO THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC4327 B FUJI 2000 C MO THEORETICAL WEIGHT kg/m
35 perimetricprofiles THEORETICAL WEIGHT kg/m EXTRUDED CORNER JOINT A CC DIECAST CORNER JOINT LC2327 B FUJI THEORETICAL WEIGHT kg/m ADAPTER CUP EM THEORETICAL WEIGHT kg/m No visible surface. 33
36 perimetricprofiles No visible surface THEORETICAL WEIGHT kg/m
37 C M Y CM MY CY CMY K Aluminiumdetails Aluminiumdetails
38 C M Y CM MY CY CMY K aluminiumdetails 36
39 C M Y CM MY CY CMY K aluminiumdetails 37
40 C M Y CM MY CY CMY K aluminiumdetails 38
41 C M Y CM MY CY CMY K aluminiumdetails 39
42 C M Y CM MY CY CMY K aluminiumdetails 40
43 C M Y CM MY CY CMY K aluminiumdetails 41
44 C M Y CM MY CY CMY K aluminiumdetails 42
45 C M Y CM MY CY CMY K aluminiumdetails 43
46 C M Y CM MY CY CMY K aluminiumdetails Inside Opening Door Outside Opening Door 44
47 C M Y CM MY CY CMY K aluminiumdetails Inside Opening Door Outside Opening Door 45
48 C M Y CM MY CY CMY K aluminiumdetails Inside Opening Door Outside Opening Door 46
49 C M Y CM MY CY CMY K aluminiumdetails Inside Opening Door Outside Opening Door 47
50 C M Y CM MY CY CMY K aluminiumdetails Outside Opening Door 48
51 C M Y CM MY CY CMY K aluminiumdetails 49
52 C M Y CM MY CY CMY K aluminiumdetails Inside Opening Door Outside Opening Door 50
53 aluminiumdetails Inside Opening Door Outside Opening Door 51
54 aluminiumdetails Outside Opening Door 52
55 aluminiumdetails Inside Opening Door Outside Opening Door 53
56 aluminiumdetails Outside Opening Door Inside Opening Door 54
57 aluminiumdetails Outside Opening Door Inside Opening Door 55
58 aluminiumdetails Inside Opening Door Outside Opening Door 56
59 aluminiumdetails 57
60 58 aluminiumdetails
61 aluminiumdetails 59
62 60 aluminiumdetails
63 aluminiumdetails 61
64 62 aluminiumdetails
65 aluminiumdetails 63
66
67 Perimetricdetails Perimetricdetails
68 66 perimetricdetails
69 perimetricdetails 67
70 68 perimetricdetails
71 perimetricdetails Inside Opening Door Outside Opening Door 69
72 perimetricdetails Inside Opening Door Outside Opening Door 70
73 perimetricdetails Inside Opening Door Outside Opening Door 71
74 perimetricdetails Inside Opening Door Outside Opening Door 72
75 perimetricdetails Inside Opening Door 73
76 perimetricdetails Outside Opening Door Inside Opening Door 74
77 perimetricdetails Outside Opening Door Inside Opening Door 75
78 perimetricdetails Inside Opening Door Outside Opening Door 76
79 Glazingtable Glazingtable
80 GLAZING THICKNESS GLAZING GASKET INSIDE GLAZING GASKET OUTSIDE GLAZING BEAD 4 mm EM103 EM mm EM103 EM mm EM103 EM mm EM102 EM mm EM102 EM mm EM102 EM
81 glazingtable GLAZING THICKNESS GLAZING GASKET INSIDE GLAZING GASKET OUTSIDE GLAZING BEAD 6 mm EM104 EM mm EM104 EM mm EM102 EM mm EM102 EM mm EM102 EM
82
83 Accessories Accessories
84 accessories DRAW NG APLICATION DESCRIPTION THEORETICAL WEIGHT kg/m IN ONE PACKAGE EM102 Glazing Gasket Inside (EPDM) m EM103 Glazing Gasket Inside (EPDM) m EM104 Glazing Gasket Inside (EPDM) m EM201 Glazing Gasket Outside (EPDM) m EM301 Acoustical Gasket (EPDM) m EM4001 Central Gasket (EPDM) m 82
85 accessories ACCESSORY DRAW NG APLICATION PROFILES APPLICATION PROFILES EM ALUminium EM PERImetric EM EM EM15200 ROD PROFILE (Euro Section 1) EM1001 (White) EM1002 (Black) Drainage Cap EM1003 (Brown) 83
86 84 accessories ACCESSORY DRAW NG APLICATION PROFILES APPLICATION PROFILES LC LC1327 LC2327 LC4327 FUJI 2000
87 accessories ACCESSORY DRAW NG APLICATION PROFILES APPLICATION PROFILES MO P MO MO
88 accessories PROFILE DRAW NG PACKAGE QUANTITY CUTTING SIZE APPLICATION PROFILES APPLICATION DETAIL CC pieces 26.5 mm CC pieces 26.5 mm CC pieces 26.5 mm CC pieces 26.5 mm Special Extruded Corner Joint for Perimetric CC pieces 26.5 mm
89 accessories System 40C, 54T and 60T Use this tool 40C profiles without profile Lorenzoline Punching Machine Handle Slot Produche Code LC0101 Indent Rod Profile Groove For (EM15200) Arm Drain Hole System 40C, 54T and 60T System 40C, 54T and 60T Use this tool 40C profiles without profile System 40C, 54T and 60T Arm Drain Hole Handle Slot Arm System 40C, 54T and 60T Indent Rod Profile Groove System 40C, 54T and 60T Arm 87
90
91 Cuttingsizes Cuttingsizes
92 cuttingsizes Accessories Quantity (pcsm) View Profile Cut Quantity (pcs) Dimensions (mm) CC /LC pcs pcs 2 pcs 2 pcs 2 pcs L H Lv=L(A1+A1)+12 Hv=H(A1+A1)+12 FUJI 2000 MO 20 EM4001 EM103 8 pcs 4 pcs 2 Lv + 2 Hv 2 Lg + 2 Hg pcs 2 pcs Lg=Lv(A2+A2) Hg=Hv(A2+A ) EM201 EM301 2 Lg + 2 Hg (Lv + Hv) x 4 90
93 cuttingsizes Profile Cut Quantity (pcs) Dimensions (mm) pcs 2 pcs 4 pcs 4 pcs 1 pcs 2 pcs 2 pcs L H L(A1+A1)+7 Lv= 2 Hv=H(A1+A1)+12 Ah= Hv70 Lg=Lv(A2+A2) Hg=Hv(A2+A ) Accessories Quantity (pcsm) View CC /LC 1127 FUJI 2000 MO 20 EM40501 EM4001 EM103 EM201 EM pcs 12 pcs 8 pcs 1 set 4 Lv + 3 Hv 4 Lg + 4 Hg 4 Lg + 4 Hg 4 Lv + 8 Hv 91
94 cuttingsizes Profile Cut Quantity (pcs) Dimensions (mm) pcs 1 pcs 1 pcs 2 pcs 2 pcs 2 pcs 2 pcs 1 pcs 1 pcs 1 pcs 1 pcs L H H Lv=L(A1+A1)+12 Hv=H(A1)+1 Lg=Lv(A2+A2) Hg=Hv(A2+A ) Lg=Lv(A2+A2) Lg=Lv(A2+A2) L1=L(A1+A1) Ah=Hv70 Accessories Quantity (pcsm) View CC /LC 2327 CC /LC 4327 FUJI 2000 MO 20 P EM07212 EM4001 EM103 EM201 EM301 BRUSH 10 2 pcs 4 pcs 6 pcs 4 pcs 2 pcs 1 set 1 Lv + 2 Hv 4 Lg + 4 Hg 4 Lg + 4 Hg 4 Lv + 4 Hv A3 92
95 cuttingsizes Profile Cut Quantity (pcs) Dimensions (mm) pcs 1 pcs 1 pcs 2 pcs 2 pcs 2 pcs 4 pcs 4 pcs 1 pcs 2 pcs 1 pcs L H H L(A1+A1)+7 Lv= 2 Hv=HA16 Hv=HA16 Lg=Lv(A2+A2) Hg=Hv(A2+142) Ah=Hv3512 Lg=Lv(A2+A2) L1=L(A1+A1) Accessories Quantity (pcsm) View CC /LC 2327 CC /LC 4327 FUJI 2000 MO 20 P EM40501 EM4001 EM103 EM201 EM301 BRUSH 10 2 pcs 4 pcs 10 pcs 8 pcs 2 pcs 1 set 2 Lv + 3 Hv 4 Lg + 4 Hg 4 Lg + 4 Hg 4 Lv + 6 Lv L1 93
96 cuttingsizes Profile Cut Quantity (pcs) Dimensions (mm) pcs 1 pcs 1 pcs 4 pcs 4 pcs 1 pcs 4 pcs 1 pcs 1 pcs 4 pcs 4 pcs 4 pcs 2 pcs L H H L2A183 Lv= 2 Hv=H(A1+43) La=L(A1+A1)+9.8 L2A183 Lv= 2 Ha=HA1+4.9 Ha=HA1+4.9 Hv=H(A1+43) Lg=Lv114.8 Hg=Hv198.2 Lg=Lv114.8 Accessories Quantity (pcsm) View CC /LC 2327 FUJI 2000 EM103 EM201 BRUSH pcs 10 pcs 4 Lg + 4 Hg 4 Lg + 4 Hg 12 Lv + 12 Hv
97 Assemblydrawings Assemblydrawings
98 assemblydrawings Corner Connection With Extruded Corner Joint Corner Connection With DieCast Corner Joint 96
99 assemblydrawings Aluminium Two Sash Window & Door Cap Assembly 97
100 assemblydrawings Perimetric Two Sash Window & Door Cap Assembly 98
101 assemblydrawings Mullion Connection Assembly 99
102 100 assemblydrawings
103 assemblydrawings Mullion Cutting Knife Detail 101
104 assemblydrawings Glazing Bead Corner Types 102
105
Plaisance 50. Windows and doors. Sapa Building System
Plaisance 50 Windows and doors Sapa Building System Plaisance 50 is a non-thermally broken system for aluminium windows and doors with a building depth. The system offers a wide range of inward and outward
More informationPlaisance 24. Sliding Systems. Sapa Building System
Plaisance 24 Sliding Systems Sapa Building System Plaisance 24 is Sapa s noninsulated sliding system for windows and doors. Available as one-, two-, three- and fourrail solution. Among its features, there
More informationConfort 26. Sliding Systems. Sapa Building System
Confort 26 Sliding Systems Sapa Building System Confort 26 is Sapa s thermally insulated sliding system for windows and doors. Available as two- and three-rail solution. Among its features, there are
More informationAvantis 75. Windows & Doors. Sapa Building System
Avantis 75 Windows & Doors Sapa Building System Avantis 75 is a thermally broken three-chamber window and door system, which sets the highest standards of thermal insulation and stability. Avantis 75
More informationInstallation Detailed installation instructions are provided which should be strictly followed.
Specification System 6 The Metal Technology Thermally-Broken Vertical Slide Window has been designed in such a way that its'attractive and clean lines will enhance all types of residential and commercial
More informationConfort 160. Sliding Systems. Sapa Building System
Confort 160 Sliding Systems Sapa Building System Confort 160 is a high performance thermally insulated sliding window system, with a user-friendly slide action. The system, which has an attractive aesthetic
More informationAll the above mentioned technical characteristics of the MU 2500 Thermal system indemnify its air and water tightness.
MU INTRODUCTION MU 2500 Thermal,.,,,,. The MU 2500 Thermal system can be used for doors and windows in domestic and commercial applications such as houses, villas, big complexes of flats and offices.
More informationGlass partitions SFB 3074
Glass partitions SFB 3074 Our facade system SFB 3074 is innovative in its design. We have made a great effort to obtain an energy effective system. The future requirements regarding the economical use
More informationΑΡΧΙΤΕΚΤΟΝΙΚΑ ΣΥΣΤΗΜΑΤΑ ΑΛΟΥΜΙΝΙΟΥ ARCHITECTURAL ALUMINIUM SYSTEMS
ΑΡΧΙΤΕΚΤΟΝΙΚΑ ΣΥΣΤΗΜΑΤΑ ΑΛΟΥΜΙΝΙΟΥ ARCHITECTURAL ALUMINIUM SYSTEMS NORMAL SLIDING and SLIDING WITH THERMAL BREAK A L U M IN IU M S Y S T E M S 32 SERIES 32 SLIDING. : 9045 815 gr/m 475 mm -25-25 - FOR
More informationSL30-ISO PROFILE SYSTEM
AESTHETICS AND sustainability SL30-ISO PROFILE SYSTEM TECHNICAL DOCuMENTATION WWW.MHB.NL SL30-ISO PROFILE SYSTEM 1. SL30-ISO and SL30-ISO-PLUS Sustainability is getting worldwide more and more the attention
More informationProfiles in stock Standard catalogue. Discover the possibilities with aluminium profiles from Sapa
Profiles in stock Standard catalogue Discover the possibilities with aluminium from Sapa You can create your own profile or you can choose from a wide selection of standard. Delivery: 1 2 weeks for standard
More informationWindows, French doors, folding windows, terrace doors SFB 1074 with low U-values
Windows, French doors, folding windows, terrace doors SFB 1074 with low U-values SFB 1074 is available in two versions. In the first version the profiles are insulated with 30 mm glass fibre reinforced
More informationCDW Systems Ltd Contemporary Doors & Windows
CDW Systems Ltd Contemporary Doors & Windows The comprehensive product overview A complete specification guide to CDW Systems range of Aluminium windows, doors and curtain walling for commercial and residential
More informationSOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design
SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels
More informationProduct information. Schüco Window AWS 65. 03.2009/Web Schüco AWS 65 1-11
Schüco Window AWS 65 The basic window system, Schüco Window AWS 65, with a comprehensive range for imaginative designs, is particularly suitable for block constructions with a basic depth of 65 mm. Features
More informationElegance 52. Curtain Walling. Sapa Building System
Elegance 52 Curtain Walling Sapa Building System Elegance 52 is a comprehensive curtain wall system that combines technology and design with the demands of contemporary building design and construction.
More informationEvidence of Performance Resistance to wind load Watertightness Air permeability
Evidence of Performance Resistance to wind load Watertightness Air permeability Test Report 102 43093/1e Client Product YILDIZPEN PLASTIK SAN. VE TIC. LTD. STI. A.O.S.B 10039 Street No:18 Çigli Izmir Turkey
More informationUnbeatable energy efficient glass curtain wall system
Unbeatable energy efficient glass curtain wall system CONTENT Introduction 1 System 2 World Class Engineering 4 Unit Selection 5 Energy Efficiency & Comfort 10 Maximised Installation Efficiency 12 Aesthetics
More informationFire Resistant Systems
Fire Resistant Systems A R C H I T E C T U R A L A L U M I N I U M G L A Z I N G S Y S T E M S Fire Resistant Systems Introduction Kawneer are pleased to introduce two new comprehensive Fire Resistant
More informationK17.12 Door closers K17. Doors 01.09.2013
K17 Doors K17.12 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com Contents 1. OPTIC door closer TS40(V) with scissor
More informationAD 55 ST YALITIMLI SÜRME DOĞRAMA SİSTEMİ AD 55 ST YALITIMLI SÜRME SİSTEMİ. AD 55 ST Isolated Sliding System
AD 55 ST YALITIMLI SÜRME SİSTEMİ AD 55 ST Isolated Sliding System 4 5 Aluminium profiles are manufactured using AlMgSi 0,5 - F22 alloy and in accordance with the 12020 Standards. Physical Characteristics:
More informationHürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
More informationEvidence of Performance. Class 2. Class 5A. Class C4 / B4. Test Report No. 15-003655-PR01. ift Rosenheim 16.12.2015
Evidence of Performance Test Report No. 15-003655-PR01 (PB-A01-02-en-01) Client Product Designation Performance-relevant product details Overall dimensions (W x H) Special features Alüminyum San. Tic.
More informationSECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront
PART 1 GENERAL 1.01 Work Included SECTION 08 41 1 ALUMINUM FRAMED ENTRANCES and STOREFRONTS System 402 Flush-Glazed Screw Spline Storefront A. Furnish and install aluminum architectural storefront system
More informationTHE REYNAERS INSTITUTE
THE REYNAERS INSTITUTE TOGETHER FOR BETTER INTRODUCTION Since the company s creation in 1965, Reynaers Aluminium has been playing a leading role in the construction industry. Its profile systems have evolved
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationSeries 602 MAGNUM Sliding Window DESIGNER SERIES
Series 602 DESIGNER SERIES DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 602 KEY EATURES / PERORMANCE CHARACTERISTICS Scale: NOT TO SCALE Designed to complement our existing high quality
More informationREHAU TOTAL70 WINDOW AND DOOR SYSTEM SYSTEM DESCRIPTION. www.rehau.co.uk/windows. Building Solutions Automotive Industry
REHAU TOTAL70 WINDOW AND DOOR SYSTEM SYSTEM DESCRIPTION www.rehau.co.uk/windows Building Solutions Automotive Industry REHAU TOTAL70 THE MORE COMPLETE SYSTEM The REHAU TOTAL70 Window and Door System comprises
More informationSeries 456 Commercial Awning Window
Commercial Awning Window COMMERCIAL SERIES Photo courtesy of Hanlon Windows Australia DATE: MAY 2013 REPLACES: MARCH 2008 COMMERCIAL SERIES KEY FEATURES/PERFORMANCE CHARACTERISTICS Scale: not to scale
More informationCATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI
CATALOGO PRODOTTI PORTONI INDUSTRIALI COIBENTATI The Company Founded in 1973 by Mr Imes Tinti in association with his son Vanni Tinti. In 1999 the locksmith workshop became a modern industrial company
More informationsliding window & mono-rail Sliding window upvc window profile systems Auf der Breit 2 DE - 76227 Karlsruhe
KunststoffFenstersysteme aluplast Gmb (ead Office) upv window profile systems Auf der reit DE 77 Karlsruhe fon: +9 71 717 fax: +9 71 7171999 info.de@aluplast.net www.aluplast.net aluplast India Pvt. Ltd.
More informationWindow Installation Instructions
Caution The correct installation methods of windows in full frame or insert applications is critical towards achieving the tested performance of the window and longterm enjoyment and energy savings for
More informationIMPORTANT INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER READ ALL INSTRUCTIONS CAREFULLY BEFORE STARTING THE INSTALLATION
INSTALLATION GUIDE VALENCIA SQUARE CORNER SHOWER SEALANT REQUIRED TO COMPLETE THIS INSTALLATION: (Not supplied) Sika Sikasil NG (Arctic White) To seal the WHITE shower door and returns to the shower tray.
More informationDE Frame with C Series Sidelight
TOOLS REQUIRED Tape measure 6' magnetic level 3' magnetic level Screw gun with clutch adjusted #2 phillips tip #3 phillips tip Screwdriver (used to adjust frame on will using oval slots) Pry Bar Powder
More informationInitial Type Testing Report
Centrum stavebního inženýrství a. s., Praha Centre of Building Construction Engineering, Inc., Prague Accredited Testing Laboratory, Authorised Body, Notified Body, Certification Body workplace Zlín -
More informationMERO Floor Systems - CleanRoom
MERO Floor Systems - CleanRoom Innovative solutions out of one hand Development Access floor Consulting Hollow floor Planning Floor covering and Manufacturing Installation Installation Services Floor systems
More informationCERTIFICATE OF APPROVAL No CF 291 SCHOTT UK LIMITED
CERTIFICATE OF APPROVAL No CF 291 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of Drummond Road, Stafford.
More informationIT infrastructure Efficiency-boosting solutions. nextlevel. for data centre
IT infrastructure Efficiency-boosting solutions nextlevel for data centre 2 Rittal IT infrastructure The whole is more than the sum of its parts. The same is true of Rittal The System. With this in mind,
More informationWATER LEAKAGE IN GLAZED CURTAIN WALL SYSTEMS:
WATER LEAKAGE IN GLAZED CURTAIN WALL SYSTEMS: BY WILLIAM D. SMITH Figure 1 Four Corporate Center, Franklin, TN. Architect: Little & Associates,Charlotte, NC. Gen. Contractor: Ray Bell Const. Co., Nashville,
More informationSun Windows General Information Sun New Construction Window Installation Instructions
Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten
More informationClad Direct Glaze Window Installation Instructions
Clad Direct Glaze Window Installation Instructions Sill flashing and sealing: 2. An overview of the proper flashing sequence is shown in figure 1. Please read entire installation instructions carefully
More informationWINDOW INSTALLATION GUIDE
WINDOW INSTALLATION GUIDE is not responsible for or liable for any use or misuse of the information contained in this window installation guide. Window Installation Guide This guide provides basic information
More informationKnürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
More informationAluminium systems profile selection
Aluminium systems profile selection The purpose of this document is to summarise the way that aluminium profile selection should be made, based on the strength requirements for each application. Curtain
More informationHow To Build A T7 Rack For Information Technology
THE NEXT GENERATION RACK FOR INFORMATION TECHNOLOGY THE RACK CABINET FOR INFORMATION TECHNOLOGY T7, THE HI-TECH HEART OF THE BLADESHELTER SYSTEM The real answer to the requirements of: Safety Versatility
More information7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME
7. Installation Window involves the fixing of window frame at an earlier construction stage and subsequent of the window sashes. This is a highly workmanship dependent process. Only trained and approved
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=600mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More information19 DYNAmax Free Standing Server C A B I N E T s
9 DYNAmax Free Standing Server C A B I N E T s 9 DYNAmax Free Standing Server Cabinets FAMILY W=mm and W=800mm DYNAmax Series Free Standing Server Cabinets DYNAmax series Servering Enclosures, provide
More informationIncorporating V2.3. Product spec >>> > Series ECG - Egg Crate Grilles. > Series ECG45-45 Egg Crate Grilles
Incorporating V2.3 Product spec >>> > Series ECG - Egg Crate Grilles > Series ECG45-45 Egg Crate Grilles Grilles Egg crate Recommended for: Wall, ceiling & duct Extract Overview Industry standard extract
More informationcomar1,3,4 & 8 Ground Floor Treatment Innovative, integrated aluminium ground floor framing suites.
Uniclass EPIC L3811:P43 C421:X421 CI/SfB (21 4) Xh4 comar1,3,4 & 8 Ground Floor Treatment Innovative, integrated aluminium ground floor framing suites. The Parkside Group Ltd Unit 5, The Willow Centre
More informationInstallation Window Building In Details
Installation Window Building In Details INSTALLATION Photo courtesy of Rowe Aluminium DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 INSTALLATION Installation Replaces: Scale: NOT TO SCALE Vantage snap-on couplers
More informationV-joint fascia soffit systems
V-joint fascia systems CI/SfB October 2005 (4-) Uniclass L5294 extruded aluminium system with complete versatility for eaves and other building features Bailey V-Joint and fascia system has been designed
More informationSERVER ROOM CABINET INSTALLATION CONCEPTS
SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS SERVER ROOM CABINET INSTALLATION CONCEPTS ZPAS 169 EXAMPLES OF SERVER ROOMS PROJECTS WITH ZPAS CABINETS Data Box in the
More informationSize & Range. for windows & doors. Company
Size & Range for windows & doors A Company B General information windows and doors Sizes This catalogue contains all Airlite s standard sizes for windows and doors. These are the ones that we make every
More informationMotorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401
CaraD-RF 1/10 63.1 Content.DOC Motorhome Entrance Door CaraD-RF With Aluminium Door Panel Art. 1401 Ordering Details Technical Drawing without Fly Net Door Technical Drawing with Fly Net Door Technical
More informationIntroduction...COMB-2 Design Considerations and Examples...COMB-3
SECTION DIRECTORY General Information Introduction...COMB-2 Design Considerations and Examples...COMB-3 Combination Assembly Recommendations and Limitations Composite Configurations...COMB-4 Typical Sealant
More informationCABINET & ENCLOSURE WWW.LINKBASIC.COM STANDARD FEATURES MATERIALS APPLICATION N C B C A B I N E T P/N:NCB
STANDARD Comply with ANSI/EIARS-30-D, DIN9; PART, IEC97-, DIN9; PART7, GB/T307.-9 standard. Compatible with metric ETSI and 9 inch international standard. FEATURES Exquisite design with precise craftsmanship
More informationCardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
More informationAdhesives. Sticking to what we know best! Bonding and cleaning Window and door construction PVC, aluminium and wood. 33/08 made by Weiss
Adhesives Bonding and cleaning Window and door PVC, aluminium and wood Sticking to what we know best! 33/08 made by Weiss Window & door Our company The expert for adhesives for window and door As one of
More informationIMPORTANT INFORMATION
Curved Quadrant Instruction Manual CQ IMPORTANT INFORMATION Toughened glass is completely safe for use in our shower enclosures and bath screens; providing our products are installed according to our guidelines.
More informationDIGITUS Network & Server Cabinets. UNIQUE Series
DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door
More informationSommer. Sommer 6. by barwick
Sommer 6 Quadrant - Single Door Page 43 Quadrant - Double Door Page 47 Offset Quadrant - Double Door Page 51 Pivot Page 55 Slider Page 59 Bi-Fold Page 63 Handle Page 64 Side Panel Page 67 Lifetime guarantee
More informationHistory Technical Requirements 7th Edition, January 2008
History Technical Requirements 7th Edition, January 2008 6th Edition, Rev. 3, June 2006 7th Edition, January 2008 Preface 5: Timber windows and door 5.9 Glass and installation of glass: 5.9.1 Glass and
More information19 NETbox SOHO Network Wall Mounting Cabinets FAMILY
9 NETbox SOHO Network Wall Mounting Cabinets FAMILY DETAILS: Framework- Top/Bottom Cases: Multi Folded Automated Bending technology applied framework and top/bottom cases, provides a heavy duty structure
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Round Top Single PRODUCT TYPE: In-swing Round Top Single Door RH-4 Title Uniform Load Deflection Test
More informationIntegral Kit Instructions
Integral Kit Instructions For Fisher & Paykel Cabinet widths of 525, 635, 680, 790 mm wide For curved door Models Series B, C, D & G Manual 814980 Updated August 2008 IMPORTANT If your refrigerator has
More informationThe answer. Cost-Benefit Ratio of different construction depths. Comparison of U f -values. profine GmbH Kömmerling Kunststoffe
Order No. 2 02 130270-0310.KA profine GmbH Kömmerling Kunststoffe Postfach 2165 66929 Pirmasens Germany Tel. +49 6331 56-0 Fax +49 6331 56-2475 E-mail: info@koemmerling.de Internet: www.koemmerling.de
More informationHINGES FOR OUTWARD OPENING APPLICATIONS. Friction Hinges. Parts Brochure
HINGES FOR OUTWARD OPENING APPLICATIONS Friction Hinges Parts Brochure ii 12-2002 Friction Hinges Index Product Liability Guidelines 4 General Design Description 5 Defender, Standard Purpose Friction Hinges
More informationCasement/Awning Window Parts Reference Catalog
Casement/Awning Window Parts Reference Catalog (Includes Miscellaneous Parts for Eyebrow Casement and Garden Bay Windows) #1028654 (Revised 03/02) Weather Shield Mfg., Inc. Medford, WI 54451 715/748-2100
More informationEdition Perfect combination ratiopacpro Electronic P Edition kaging www clear order..biz information in the catalogue
ratiopacpro Overview... 0 Cabinets... 1 Y Desk-top cases Y Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 06800002 Subracks/ 19" chassis...
More informationNetworking Cabinets > Part No Capacity Available Colors Height(mm) Width(mm) Depth(mm)
Wall Mount Cabinets Link IT Single Sided Wall Mount Cabinets Welded frame, reliable structure Standing or wall mounting installation Easy mounting installation 19 standard installation Removable side panels,
More informationReduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U
Reduced depth High Density Cabinet HDC with 19 swing frame 36, 40 and 45 U Applications The High Density Cabinets are suitable for Central Offices and can be used as fiber nodes and termination points
More informationFluxa Area floodlights for high pressure discharge lamps and LEDs
Fluxa Area floodlights for high pressure discharge lamps and s Fluxa is a series of area floodlights with symmetrical or wide beam reflectors. There are 4 sizes for high pressure discharge lamps or with
More informationSTAIRCASES I DOORS I WINDOWS
ARU JOINERY Timber Processing since 1994 WINDOWS DOORS STAIRCASES WINDOWS We offer timber and alu-clad windows in 3 basic varieties: CASEMENT, TILT & TURN, and SASH windows, with a vast array of design
More informationSECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS 521 SERIES ALUMINUM SECTIONAL OVERHEAD DOORS Display hidden notes to specifier by using Tools / Options / View / Hidden Text. On newer versions of Microsoft Word
More informationImportant Information
Single Door Quadrant Instruction Manual ESQ Important Information Toughened glass is completely safe for use in our shower enclosures and bath screens; providing our products are installed according to
More informationVariety of Control Options Control is possible via wall switches, remote control systems or integration into building management systems.
Breezway Altair Powerlouvre Window 35 Breezway Altair Powerlouvre Window The Powerlourve Window motor is neatly concealed within the Easyscreen TM Frame or the Component Powerlouvre Head Section. Automated
More informationJANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs
JANUARY, 2016 TR-7100 Windows (Fixed) 1 EC 97909-071 085113 ALUMINUM WINDOWS Guide Specs SECTION 085113 ALUMINUM WINDOWS This suggested guide specification has been developed using the current edition
More informationQ-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL
Q-Lon foam weatherseal: for PVC, timber and aluminium applications THE WORLDS BEST WEATHERSEAL CONTENTS About Schlegel 3 Q-Lon Profiles PVC doors, windows and roller shutters 6 Timber doors and windows
More informationKnürr DCM. Knürr DCM. 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1
Knürr DCM 19 Server Rack System 19 Heavy Duty Rack 1.2 to 1.9 1.1 Knürr DCM conquers the world Standardization in the data center begins with the Knürr DCM! The Knürr DCM is the modular building block
More informationWindow Types and Materials
Window Types and Materials There are many window designs in use today: a) Awnings (Top-Hinged) b) Casement (Side-Hinged) c) Picture (Fixed) d) Horizontal Slider e) Single Hung f) Double Hung g) Tilt and
More informationSchlüter -KERDI-BOARD Substrate, structural panel, bonded waterproofing
Substrate, structural panel, bonded waterproofing The universal substrate for tiles Perfect covering No matter whether you work with mosaics or large format tiles, an absolutely level substrate with straight
More informationAstragal: a vertical member placed at the meeting edges of a double door to provide a weather seal and may be used to anchor the fixed door.
Window and Door Dictionary AAMA: American Architectural Manufacturers Association. A national trade association that establishes voluntary standards for the window, door, and skylight industry. Ambient
More informationINDEX. Chapter8. air master. Perforated Ceiling Diffusers
Chapter8 INDEX A. Perforated ceiling diffuser 1. Perforated ceiling diffuser with plenum box..: APCD+P...8.1. Perforated ceiling diffuser with damper....: APCD...8. Standard sizes...8. Fixing details...8.
More informationCity of San Diego, CWP Guidelines
PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,
More informationSeries 5100 Vinyl Replacement
Series 5100 Vinyl Replacement Windows Series 5100 For remodeling projects which call for the classic styling of double hung or the convenience of sliding windows, look no further than the 5100 series for
More informationInForm Tables and Base Cabinets
System tables 30 mm thick, coated with laminate, selection of 3 different front edges: Postformed edge, 70 mm high Edge band, 3 mm thick FlexiLine edge, replaceable. Permitted surface load on the tabletop:
More informationTHE IDEAL SOLUTION SHELVING. Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk
THE IDEAL SOLUTION Sales Telephone: 01553 765205 Sales Fax: 01553 768464 Email: sales@eais-foodservice.co.uk EZ STORE Bright Chrome Wire System g Bright Chrome wire shelves Heights 3 tier = 1650mm standard
More informationContrast 2 LED. Performance Compactness Complete flexibility NEW
NEW Contrast 2 LED High light output in a compact and discreet design with a wide choice of light effects created using different light distributions and accessories Performance Compactness Complete flexibility
More informationBarewood Octagon and Elongated Windows Installation Instructions
Step-by-step instructions to a beautiful window. Measuring and Installation of your new window from Century Specialty Windows couldn't be easier with our step-by-step instructions. Quality, function and
More informationTechnical data sheet PVC Bi-fold doors
Standard Specifications White internally beaded, Deceuninck 3000 series profile 28mm Low-e toughened sealed units with argon gas Open in doors with white handles and hinges Tracks are fitted to the top
More informationTHERMOSTOP24 System PORTALEX ALUMINIO SA
THERMOSTOP24 System is engaged in the extrusion of aluminium profiles of several sizes with more or less complexity, depending on the client's needs. The extrusion of aluminium allows all freedom of design
More informationUniPlate. Solar Collectors SOLAR SYSTEMS. www.solarico.eu
UniPlate Solar Collectors SOLAR SYSTEMS www.solarico.eu keep the sun in mind Solar energy has by far the highest theoretical potential of the earth s renewable energy sources. It is the most abundant energy
More information12.1 Schlüter -KERDI-BOARD
I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter
More informationHow To Fit A Portman Door Leaf
Portman Sliding Door Gear Timber/Frames Doors Frameless Glass Doors Top track Portman top tracks are suitable for door leaves of up to 80kg as standard Material is 6063T6 aluminium alloy anodised to 15
More informationInstallation Instructions
Installation Instructions 1. Position the unit onto bridging packers. These keep the unit away from any water sitting inside the frame. 2. Centralise the unit within the frame and pack the edges with appropriate
More informationData Centre Solutions
Issue 6 Data Centre Solutions RACKS POWER COOLING MONITORING SECURITY SERVICE & SUPPORT The simple route to the perfect data centre Data centres are complex systems. Software, hardware and IT infrastructure
More information