Door Locks Hardware By Professionals For Professionals 134 135
Door Lock Contents Locking & Compression Points Operation Recommended Applications Materials Strikers Page No. Latch & Deadbolt Additional Deadbolts Roller Cams Mushroom Cams Hooks Pins Optional shootbolt extensions Evolution - 2 Hook, 2 Pin, 2 or 4 Roller 141 n - 2 or 4-2 2 n n H n n - - - n n n - n n Evolution Dual Function - 2 Hook, 2 Pin, 2 or 4 Roller 143 n - 2 or 4-2 2 n n H n n - - - n n n - n n Trinity - 2 Hook, 2 Roller 145 n - 2-2 - n n H n n - - - n - - - n n M-Fear - 2 Hook, 2 Roller 147 n - 2-2 - n n H n n - - - n - - - - - M-Fear Twin Spindle - 2 Hook, 2 Roller 149 n - 2-2 - n - n H n n - - - n - - - - - Mila Multipoint - 2 Roller, 2 Mushroom 151 n - 2 2 - - - - H n - - - - n - - - - - Mila Multipoint - 4 Roller 153 n - 4 - - - - - H n - - - - n - - - - - Mila Multipoint - Slave 155 n - - - - - n - H - - n - - n - - - - - Milla Master PL13 2ER - 2 Hook, 2 Pin, 2 Roller 157 n - 2-2 2 - n H n - - - - n n n - n n Mila Master - 2 Hook, 2 Pin, 4 Roller 159 n - 4-2 2 n n H n n - - - n - - - n n Mila Master - 2 Hook, 2 Pin, 2 Roller 161 n - 2-2 2 n n H n n - - - n - - - n n Mila Master - 3 Deadbolt 163 n 3 - - - - - n H n - - - - n n n - - - Mila Master - 4 Roller 165 n - 4 - - - - - H n - - - - n - - - - - Mila Master - 2 Roller 167 n - 2 - - - n n H n n - - - n - - - - - Mila Master - Slave 169 n - - - - - n - H - - n - - n - - - - - AS 7922-2 Hook, 4 Roller 171 n - 4-2 - - n H n - - - - n - - - - n AS 7921-2 Hook, 2 Roller 173 n - 2-2 - n n H n n - - - n n n - - - AS 7970-2 Hook 175 n - 2-2 - n - H n n - -- - n n n - - - AS 7370-2 Pin 177 n - - - - 2 n - H n n - - - n n n - - - AS 7070-2 Roller 179 n - 2 - - - n - H n n - - - n - - - - - AS 4921-2 Hook 2 Roller 181 n - 2-2 - - n H n - - - - n - - - - - AS 4900-2 Hook 183 n - - - 2 - - - H n - - - - n n n - - - AS 4350-2 Pin 185 n - - - - 2 - - H n - - - - n n n - - - AS 4050-4 Roller 187 n - 4 - - - - - H n - - - - n - - - - - AS 2300-2 Pin 189 n - - - - 2 - - C n - - - - n n n - - - AS 8250-4 Roller 191 n - 4 - - - - - C n - - - - n - - - - - AS 7000 - Slave 193 n - - - - - - - H - - n - - n - - - - - M-Fear - Stable Door 195 n 1 2-2 - - - H - - - n - n - - - - - AS 2300 - Stable Door 197 n 1 - - - 2 - - H - - - n - n - - - - - Mila Pin Panic Lock - 2 Pin 199 n - - - - 2 - - H - - - - n n - n - - - Mila Surface Mounted Panic Lock - 3 Latch 201 n - - - - - - - - - - - - n n - n - - - Push Button Lock 203 n - - - - - - - - n - - - - n - n - - - Genius - Electronic Lock 205 n - - - - - - - H n - - - - n - n - - - 39 PZW - Mortice Lock 207 n - - - - - - - C n - - - - n - n n - - 49 PZW - Mortice Lock 209 n - 4 - - - - - C n - - - - n - n n - - Twin/ Split Spindle available H = Handle C = Cylinders Residential Doors French Door Main Leaf French Doors Slave Leaf Stable Door Panic Door PVC-u Composite (lock available in range) Timber Aluminium 3 Piece Striker Kit One Piece Striker 136 Door Lock Contents : Door Locks : The Key 6 Hardware By Professionals For Professionals 137
T Door Lock Selection Mila stock a comprehensive range of multipoint door locks, a proportion of which are included within this catalogue. Listed below are the major elements to consider when selecting multipoint locks: 1. Select the lock application and type: The type of multipoint lock you choose will depend greatly upon it s intended application. As the UK market has developed, Mila have developed locks to suit all common applications, including: Door Locks Selection 3. Select the locking & sealing point configuration: Depending upon the level of security required various configurations of locking and sealing points can be selected: Residential Doors: Multipoint locks for use on front or back doors. These multipoint locks feature various combinations of locking points, from basic 4 roller locks to enhanced security hook locks. French Door Master Leaf: Multipoint locks designed for use on the master leaf of a pair of french doors. These locks often feature the same locking point combinations as standard residential door locks but can have shootbolts added top and bottom - highly recommended when used on french doors. French Door Slave Leaf: Multipoint locks designed for use on the slave leaf of a pair of french doors. Slave locks are fitted behind a french door dummy mullion and have shootbolts fitted top and bottom. Fitting a slave lock provides enhanced security when compared to finger bolts and maintains the symmetry of the door as two sets of handles are fitted. Stable Door: Stable doors are become increasingly popular as an alternative to traditional residential doors - particularly as a rear or kitchen door. Stable door locking systems allow the top half of the door to be opened for ventilation or the whole door to open for access. Latch: Reversible latch for right or left hand doors. Deadbolt: Deadbolt protected by anti-saw pins. Roller cam: Adjustable roller cams to ensure optimum weathersealing. Mushroom cam: Anti-separation devices with adjustability for weathersealing. Panic Door: Multipoint locks designed for use on Panic Doors. These multipoint locks are operated internally via panic bars or pads for safe, simple egress in case of emergency. 2. Identify the faceplate width, backset and PZ dimensions required: Faceplate width: The standard faceplate width for multipoint locks is 16mm, although some locks are available with a 24mm U-track faceplate. Please note: Mila are in the process of standardising our faceplate finish from yellow bi-chromate to silver. Please confirm the faceplate colour of your lock when placing your order. A Backset: The backset dimension (A) is the distance from the gearbox faceplate to the centre of the square spindle hole. Backset dimensions will generally be either 35mm for PVCU doors or 45mm for composite or timber doors. Pz: The Pz dimension (B) is the distance from the centre of the handle spindle hole to the centre of the cylinder. The most common Pz distance is 92mm although this can vary depending on lock manufacturer and lock function ie. twin spindle locks. B C Hook & pin: Strong combination of anti-separation hook bolts and anti-lift pins. Hook: Strong anti-separation devices, lock in an upward direction and secure behind striker. Pin: Anti-lift bolts protected by anti-saw pins. Shootbolt Extension: Can be added top and bottom to specific door locks. Used to enhance the security of residential doors or for use on the master or slave leaf of a set of french doors. 138 Door Lock Selection : Door Locks : The Key 6 Hardware By Professionals For Professionals 139
Technical Data Type 2 hook, 2 pin, 2 or 4 roller Operation Lever/lever Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 Product Specification Evolution Lock 2 Hook, 2 Pin, 2 or 4 Roller Evolution multipoint locks have been developed by combining the best multipoint locking features, enhancing them and putting them together in a single package. The first evident feature of the Evolution multipoint is the smooth locking operation. Each lockcase component and associated material has been specially designed and selected to reduce operating forces and provide smooth operation. Lock operation and sealing is further enhanced by adjustable roller cams. The Evolution multipoint lock features: : Sprung loaded quick reverse latch : European design and manufacture optional Locking Points Sealing Points Faceplate 2 x hook, 2 x anti-lift bolts, deadbolt, with anti-saw pins, reversible latch, shootbolts top and bottom (optional) 2 x roller cams compression adjustable +/- 1mm Mild steel : Smooth locking operation : Enhanced security; all locking points, including deadbolt, thrown by handle : Successfully tested to PAS 24-1 : Die cast hook bolts : Adjustable roller cams for enhanced lock operation and sealing : Secured by Design product Box Quantity 10 : Door locks available in kits (contact the Mila sales team on 01327 312 400 for details) : One piece striker to speed fabrication : Security shootbolt extensions are available for both resi-doors and the master leaf of french doors : Evolution slave door lock also available Description Type Backset (mm) Hooks Pins Rollers Part No. Evolution Door Lock Standard 35 2 2 2 047238 Evolution Door Lock Standard 35 2 2 4 047241 Universal Shootbolt Kit UNISBK 10 years SBD Product Yes optional 140 Evolution Lock 2 Hook, 2 Pin, 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 141
Technical Drawings Type Operation Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 Product Specification Locking Points Sealing Points Faceplate Box Quantity 10 2 hook, 2 pin, 2 or 4 roller Lever/lever or lever/pad 2 x hook, 2 x anti-lift bolts, deadbolt, with anti-saw pins, reversible latch, Shootbolts top and bottom (optional) 2 x roller cams compression adjustable +/- 1mm Mild steel T Evolution Dual Function Lock 2 Hook, 2 Pin, 2 or 4 Roller The Evolution dual function lock can be used as either a standard lever/lever lock or can provide a rim latch feature by using a split-spindle. The Evolution dual function lock can be used in both functions with standard Pz 92 handles - no special handlesets are required. The Evolution multipoint lock features: : Dual function - standard lever/lever or lever/pad operation in one lock : Suits all standard Pz 92 handles - no special handle requirements : Sprung loaded quick reverse latch : European design and manufacture : Smooth locking operation : Enhanced security; all locking points, including deadbolt, thrown by handle : Successfully tested to PAS 24-1 : Die cast hook bolts : Security shootbolt extensions available : Adjustable roller cams for enhanced lock operation and sealing : Evolution slave door lock also available : One piece striker to speed fabrication optional Description Type Backset (mm) Hooks Pins Rollers Part No. Evolution Door Lock Split Spindle 35 2 2 2 047240 Evolution Door Lock Split Spindle 35 2 2 4 047242 Universal Shootbolt UNISBK Split Spindle Kit 54/54 059280 Split Spindle Kit 54/64 059281 Split Spindle Kit 54/74 059282 10 years SBD Product Yes optional to place your order simply call our sales team directly on 01327 312 400 142 Evolution Dual Function Lock : Door Locks : The Key 6 Hardware By Professionals For Professionals 143
Technical Data Type Operation 2 hook, 2 roller Lever/lever or lever/pad, twin spindle Pz (mm) 92/70 Backset (mm) 35 Faceplate (mm) 16 Locking Points Sealing Points 2 x hook, 2 x roller cams, latch and deadbolt 2 x roller cams compression adjustable +/- 1mm Faceplate Mild steel Box Quantity 10 144 Trinity Lock 2 Hook, 2 Roller : Friction Stays : The Key 6
Trinity 2 Hook, 2 Roller The Mila Trinity multipoint door lock features a combination of strong, cast steel hooks for security and roller cams for weather sealing. Optional The Mila Trinity features: : Twin cast steel hooks : Reversible latch bolt : Centre deadbolt : Twin roller cams, compression adjustable +/-1mm : Roller cams placed outside hooks to enhance sealing at the head and cill of the door : Option of standard lever/lever or twin spindle type operation : Option of adding shootbolts top and bottom for high security residential or french doors Description Type Backset (mm) Hooks Rollers Part No. Trinity 2 Hook, 2 Roller Standard 35 2 2 047228 Trinity 2 Hook, 2 Roller Twin Spindle 35 2 2 047229 Shootbolt Set - - - - UNISBK Optional Hardware By Professionals For Professionals 145
Technical Drawings Type 2 hook, 2 roller Operation Lever/lever Pz 92 Backset (mm) 35 Faceplate (mm) 16 TM-Fear 2 Hook, 2 Roller The M-Fear lock is a lever/lever operation multipoint lock, featuring a combination of strong, cast steel hooks for security and roller cams for weather sealing. The M-Fear features: : Twin cast steel hooks : Reversible latch bolt : Centre deadbolt Optional Faceplate & Operating Rod FE490 roller annealed 15.9 x 2.5 A VFMG zincotropicalized 12-15 VM : Twin roller cams, compression adjustable +/-1mm : Roller cams placed outside hooks to enhance sealing at the head and cill of the door : Lever/lever operation Gearbox/Cover Aluzinc B500 to EN 10215 hot zinc (zinc alloy 5590) - 20 VM Zinc alloy components 2410 ZNAL 4CV1 to EN 1774 (UNI 3717) : Option of adding shootbolts top and bottom for high security residential or french doors : Full french door suite available within the range, including slave door lock Sintered components SINT D30-39 to DIM 30910 zinc plated white 8 VM Internal zinc components FE390-490 cold rolled to EN 10204 Screws UNI 8109-8113 coated FE ZN 5UM Box Quantity 10 Description Type Backset (mm) Hooks Rollers Part No. M-Fear Multipoint Lock Standard 35 2 2 047138 Shootbolt Normal Action - - - 047197C Shootbolt Reverse Action - - - 047198C Optional 146 M-Fear 2 Hook, 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 147
Technical Data Type Operation 2 hook, 2 roller Lever/lever or lever/pad Pz 92 / 70 Backset (mm) 35 Faceplate (mm) 16 Faceplate & Operating Rod Gearbox/Cover FE490 roller annealed 15.9 x 2.5 A VFMG zincotropicalized 12-15 VM Aluzinc B500 to EN 10215 hot zinc (zinc alloy 5590) - 20 VM Zinc alloy components 2410 ZNAL 4CV1 to EN 1774 (UNI 3717) Sintered components SINT D30-39 to DIM 30910 zinc plated white 8 VM Internal zinc components FE390-490 cold rolled to EN 10204 Screws Box Quantity 10 UNI 8109-8113 coated FE ZN 5UM 2120mm 517.5mm 1086mm 516.5mm 250mm 233mm 266.5mm 250mm 95mm 92mm 95mm 567.5mm 518.5mm 366.5mm 718.5mm 684.5mm 350.5mm TThe M-Fear twin spindle lock combines the security advantages of a traditional one-piece multipoint lock with the benefits of a rim latch type function. M-Fear Twin Spindle 2 Hook, 2 Roller The M-Fear features: : Twin cast steel hooks : Reversible latch bolt : Centre deadbolt : Twin roller cams, compression adjustable +/-1mm : Roller cams placed outside hooks to enhance sealing at the head and cill of the door : Twin spindle type operation : Option of adding shootbolts top and bottom for high security residential or french doors : Full french door suite available within the range, including slave door lock Description Type Backset Hooks Rollers Part No. M-Fear Twin Spindle 35 2 2 047128 Shootbolt Normal Action - - - 047197 Shootbolt Reverse Action - - - 047198 Optional Optional 148 M-Fear Twin Spindle 2 Hook, 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 149
Technical Drawings Type Operation Pz (mm) 92 2 roller, 2 mushroom Lever/lever Backset (mm) 35 & 45 Faceplate (mm) 16 Faceplate & Operating Rod Gearbox/Cover Zinc alloy components Sintered components Internal zinc components FE490 roller annealed 15.9 x 2.5 A VFMG zincotropicalized 12-15 VM Aluzinc B500 to EN 10215 hot zinc (zinc alloy 5590) - 20 VM 2410 ZNAL 4CV1 to EN 1774 (UNI 3717) SINT D30-39 to DIM 30910 zinc plated white 8 VM FE390-490 cold rolled to EN 10204 Screws UNI 8109-8113 coated FE ZN 5UM Box Quantity 10 TThe Mila multipoint lock, 2 roller and 2 mushroom, is for use on standard residential doors. Mila Multipoint 2 Roller, 2 Mushroom Features: : Twin roller cams, compression adjustable +/-1mm : Twin mushroom cams : Cams travel 16mm : Reversible latch bolt : Centre deadbolt : Lever/lever operation : Available in 35mm backset as standard or 45mm backset available to special order Description Backset (mm) Mushroom Rollers Part No. Mila Multipoint Lock 35 2 2 047132 Mila Multipoint Lock 45 2 2 047142* * special order only 150 Mila Multipoint 2 Roller, 2 Mushroom : Door Locks : The Key 6 Hardware By Professionals For Professionals 151
Technical Drawings Type Operation Pz (mm) 92 4 roller Lever/lever Backset (mm) 35 & 45 Faceplate (mm) 16 Faceplate & Operating Rod Gearbox/Cover Zinc alloy components Sintered components Internal zinc components FE490 roller annealed 15.9 x 2.5 A VFMG zincotropicalized 12-15 VM Aluzinc B500 to EN 10215 hot zinc (zinc alloy 5590) - 20 VM 2410 ZNAL 4CV1 to EN 1774 (UNI 3717) SINT D30-39 to DIM 30910 zinc plated white 8 VM FE390-490 cold rolled to EN 10204 Screws UNI 8109-8113 coated FE ZN 5UM Box Quantity 10 T Mila Multipoint 4 Roller The Mila multipoint lock, 4 rollers, is for use on standard residential doors where only a basic level of security is required. Features: : Four roller cams, compression adjustable +/-1mm : Cams travel 16mm : Reversible latch bolt : Centre deadbolt : Lever/lever operation : Available in 35mm backset as standard or 45mm backset available to special order Description Backset (mm) Rollers Part No. Mila Multipoint Lock 35 4 047130 Mila Multipoint Lock 45 4 047140* * special order only 152 Mila Multipoint 4 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 153
Technical Drawings Type Slave Operation Lever/lever Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 T Mila Multipoint Slave The Mila slave lock is for use on the slave leaf of a pair of french doors, featuring smooth lever operation, cylinder locking and shootbolts top and bottom. All shootbolts secure into adjustable french door keeps for optimum compression at the top and bottom of the door. Faceplate & Operating Rod Gearbox/Cover FE490 roller annealed 15.9 x 2.5 A VFMG zincotropicalized 12-15 VM Aluzinc B500 to EN 10215 hot zinc (zinc alloy 5590) - 20 VM Zinc alloy components 2410 ZNAL 4CV1 to EN 1774 (UNI 3717) Sintered components SINT D30-39 to DIM 30910 zinc plated white 8 VM Internal zinc components FE390-490 cold rolled to EN 10204 Screws UNI 8109-8113 coated FE ZN 5UM Box Quantity 10 Description Type Backset Part No Multipoint Slave Lock Slave 35 047065 Shootbolt Normal Action - 046311C Shootbolt Reverse Action - 046313C 154 Mila Multipoint Slave : Door Locks : The Key 6 Hardware By Professionals For Professionals 155
Technical Drawings Type 2 hook, 2 pin, 4 roller Operation Lever/lever or Lever Pad Pz (mm) 92 or 92/62 Backset (mm) 35 Faceplate (mm) 16 T Mila Master PL13 2ER 2 Hook, 2 Pin, 4 Roller The Mila Master PL13 2ER for residential doors features two independent upward auto-locking hooks while anti-lift pins engage when the hooks are thrown to provide enhanced security. Four pre-compression roller cams in the optimum positions at the top and bottom of the door, providing enhanced sealing. : 2 Upward locking hooks : 2 Anti-lift pins automatically engage when hooks are operated to provide enhanced security : 4 Adjustable roller cams for enhanced sealing and compression, travel before hooks to ensure smooth operation : Secured by Design licenced product 1934 min SRH 92 543 14 2200 Strikers options : : Individual centre latch & dead bolt striker, 2 x combined hook, pin and roller cam strikers Or : Standard one piece striker Or : Enhanced one piece striker supplied with apertures for through fixing of frame to brickwork. 884 565 Description Type Backset (mm) Hooks Pins Rollers Striker BOM PL13 2ER Standard 35 2 2 4 Individual PADSPRUNGI PL13 2ER Twin Spindle 35 2 2 4 Individual PADUNSPRUNGI 1050 PL13 2ER Standard 35 2 2 4 1 Piece PADSPRUNGOP PL13 2ER Twin Spindle 35 2 2 4 1 Piece PADUNSPRUNGOP PL13 2ER Standard 35 2 2 4 Enhanced 1 Piece PADSPRUNGOPH PL13 2ER Twin Spindle 35 2 2 4 Enhanced 1 Piece PADUNSPRUNGOPH 10 years SBD Product Yes 156 Mila Master PL13 2ER : Door Locks : The Key 6 Hardware By Professionals For Professionals 157
Technical Drawings Type Operation 2 hook, 2 pin, 4 roller Pz (mm) 92 or 92/62 Lever/lever, lever/pad, & twin spindle TThe MILA Master lock is an extremely versatile lock which can be utilised for all common applications - front door lever/lever or lever/pad, back door lever/lever or french door master leaf. PVCu, timber, composites or aluminium. Mila Master 2 Hook, 2 Pin, 4 Roller Backset (mm) Faceplate (mm) Case Deadbolt Latch Faceplate Hooks & Anti-lift Bolt Box Quantity 5 35 (45 special order) 16 (20 special order) Steel to BS1449 CR4, zinc plated & yellow passivated to BS1706 Zn8 Brass stamped to BS2874 CZ122, zinc plated & yellow passivated to BS1706 Zn8 Diecast in zinc alloy to BS1004B, zinc plated & yellow passivated to BS1706 Zn8 Steel to BS1449 CR4, zinc plated & yellow passivated to BS1706 Zn8 Diecast in zinc alloy to BS1004B, copper - nickel plated to BS1224 747 284 284 228 154 92 304 553.5 477.5 499 1000 2200 The MILA Master lock features as standard: : Reversible latch : Deadbolt with hardened anti-saw pins : 2 x hooks : 2 x anti-lifts : 4 x patented pre-compression roller cams which travel before the hooks to ensure smooth operation and positive door alignment Further options include: : Option of twin spindle type operation : On the front door lever/pad operation a snib facility is available to withhold the latch to prevent being locked out : Shootbolts which can be added top and bottom of a door to further enhance security or when using the lock as a master French door : One piece striker for enhanced aesthetics and faster fabrication times : Adjustable french door keeps for optimum compression at the top and bottom of the door Description Type Backset (mm) Hooks Pins Rollers Part No. Mila Master Standard 35 2 2 4 041000 Mila Master Twin 35 2 2 4 041020 Shootbolt Set Security - - - - UNISBK 10 years SBD Product Yes 158 Mila Master 2 Hook, 2 Pin, 4 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 159
Technical Drawings Type Operation 2 hook, 2 pin, 4 roller Lever/lever or lever/pad Pz (mm) 92 or 92/62 Backset (mm) Faceplate (mm) 35 (45 special order) 16 (20 special order) Case Steel to BS1449 CR4, zinc plated & yellow passivated to BS1706 Zn8 Deadbolt Brass stamped to BS2874 CZ122, zinc plated & yellow passivated to BS1706 Zn8 Latch Diecast in zinc alloy to BS1004B, zinc plated & yellow passivated to BS1706 Zn8 Faceplate Hooks & Anti-lift Bolt Box Quantity 5 Steel to BS1449 CR4, zinc plated & yellow passivated to BS1706 Zn8 Diecast in zinc alloy to BS1004B, copper - nickel plated to BS1224 1,175.3 228 92 2200 424.6 154 756 14 734 1050 160 Mila Master 2 Hook, 2 Pin, 2 Roller : Door Locks : The Key 6
T Mila Master 2 Hook, 2 Roller The MILA Master lock, featuring 2 hooks and 2 rollers, is a high security multipoint lock designed for residential doors. : Reversible latch : Deadbolt with hardened anti-saw pins : 2 x hooks : 2 x anti-lifts : 2 x patented pre-compression roller cams which travel before the hooks to ensure smooth operation and positive door alignment Further options include: : Option of twin spindle type operation Description Type Backset (mm) Hooks Pins Rollers Part No. Mila Master Standard 35 2 2 4 041002 Mila Master Twin Spindle 35 2 2 4 041022 10 years Hardware By Professionals For Professionals 161
Technical Data Type 3 deadbolt Operation Lever/lever or lever/pad Pz (mm) 92 or 92/62 Backset (mm) 35 Faceplate (mm) 16 154 Mila Master 3 Deadbolt The Mila Master 3 deadbolt lock is a high security multipoint lock designed for residential doors. The Mila Master 3 deadbolt lock features as standard: : Reversible latch : Deadbolt with hardened anti-saw pins : 2 x additional deadbolts Case Deadbolt Latch Faceplate Steel to BS 1449 CR4, zinc plated Brass stamped to BS2874 CZ122, zinc plated Diecast in zinc alloy to BS 1004B, zinc plated Further options include: : Option of twin spindle type operation 228 92 718 14 718 2200 1050 Steel to BS 1449 CR4, zinc plated Box Quantity 5 Description Type Backset (mm) Deadbolts Part No. Mila Master 3 Deadbolt Standard 35 3 041004 Mila Master 3 Deadbolt Twin Spindle 35 3 041024 10 years 162 Mila Master 3 Deadbolt : Door Locks : The Key 6 Hardware By Professionals For Professionals 163
Technical Data Type 4 roller Operation Lever/lever or lever/pad & twin spindle Pz (mm) 92 or 92/62 Backset (mm) 35 Faceplate (mm) 16 Mila Master 4 Roller The Mila Master 4 roller lock is a multipoint lock designed for residential doors, featuring as standard: : Reversible latch : Deadbolt with hardened anti-saw pins : 4 x pre-compression roller cams Further options include: : Option of twin spindle type operation Case Steel to BS 1449 CR4, Zinc plated Deadbolt Latch Faceplate Box Quantity 5 Brass stamped to BS 2874 CZ122, zinc plated Diecast in zinc alloy to BS 1004B, zinc plated Steel to BS 1449 CR4, zinc plated 779 355 228 92 2200 Description Type Backset (mm) Rollers Part No. Mila Master 4 Roller Standard 35 4 041004 Mila Master 4 Roller Twin Spindle 35 4 041024 355 1050 289.3 10 years 164 Mila Master 4 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 165
Technical Data Type 2 roller extendable Operation Lever/lever Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 Mila Master 2 Roller The Mila Master 2 roller extendable lock is a multi-point lock designed for use on residential doors or as the master leaf, with additional shootbolts, on a pair of french doors. The Mila Master 2 roller extendable lock features as standard: : Reversible latch : Deadbolt with hardened anti-saw pins optional : 2 x pre-compression roller cams Further options include: Case Deadbolt Latch Faceplate Box Quantity 5 Steel to BS 1449 CR4, zinc plated Brass stamped to BS 2874 CZ122, zinc plated Diecast in zinc alloy to BS 1004B, zinc plated Steel to BS 1449 CR4, zinc plated 779 228 92 834.4 14 900.7 2200 644 1050 : Shootbolts which can be added top and bottom of a door to further enhance security or when using the lock as a master French door : Adjustable french door keeps for optimum compression at the top and bottom of the door Description Type Backset (mm) Rollers Part No. Mila Master Standard 35 2 041006 Shootbolt Set Security - - UNISBK optional 10 years 166 Mila Master 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 167
Technical Data Type Slave Operation Lever/lever Pz (mm) 92 Mila Master Slave Lock The Mila Master slave lock is designed for use on the slave leaf of a pair of french doors. Shootbolts secure into adjustable french door strikers for optimum compression at the top and bottom of the door. Enhanced security shootbolts are also available featuring a return for additional screw fixing into the sash. Backset (mm) 35 Faceplate (mm) 16 The MILA Master slave lock features; : Smooth lever operation Case Steel to BS 1449 CR4, zinc plated : Cylinder locking : Tooth couplings, for the addition of shootbolts, top & bottom Deadbolt Brass stamped to BS 2874 CZ122, zinc plated Faceplate Box Quantity 5 Steel to BS 1449 CR4, zinc plated 228 92 857.5 14 976.2 1000 2200 Description Type Backset (mm) Part No. Mila Master Slave Lock - 35 041040 Shootbolt Set Security - UNISBK 10 years 168 Mila Master Slave Lock : Door Locks : The Key 6 Hardware By Professionals For Professionals 169
Technical Data Type 2 hook, 4 roller Operation Lever/lever or lever/pad Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 TAS 7922 2 Hook, 4 Roller The AS 7922 multipoint lock is suitable for all applications. In it s basic form it is a high security residential door lock. Through the use of a spilt spindle it will provide rim latch type operation. The addition of shootbolts top and bottom enables it to be used as the master door lock on a pair of french doors. Lever operated, the AS 7922 features 2 hardened steel hooks, 4 roller cams, a reversible latch and an anti-saw deadbolt as standard. : Suits all standard 92mm pz handles - no special requirements Lock case : Twin hardened steel hooks for security and adjustable roller cams for compression : Lever/lever - lever/pad - one lock - all options Face plate Steel acc. En 10149 Latch bolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 Deadbolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 : Option of standard lever/lever or day latch operation without modification, therefore reducing stock requirements : Option of adding shootbolts top and bottom for high security residential or french doors Hook bolt Steel/nickel plated En 12540 Spindle square Brass acc. DIN 1709 Handle-spring housing Zinc diecasting acc.. 1743-2 Handle-spring Steel acc. En 2076 Drive gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2 /nickel plated En 12540 Tumber spring Steel acc. DIN 2076-D Description Type Backset (mm) Hooks Rollers Part No. AS 7922 Standard 35 2 4 047988 AS 7922 XL Split Spindle 35 2 4 047989 Shootbolt Set Security - - - UNISBK Box Quantity 5 Split Spindle Kit 54/54 059280 Split Spindle Kit 54/64 059281 Split Spindle Kit 54/74 059282 170 AS 7922 2 Hook, 4 Roller: Door Locks : The Key 6 Hardware By Professionals For Professionals 171
Technical Data Type 2 hook 2 roller, extendable Operation Lever/lever or lever/pad Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 AS 7921 2 Hook, 2 Roller The AS 7921 multipoint lock can be utilised in it s basic form as a high security residential door lock, to provide rim latch type operation through the use of a spilt spindle, or as the master door lock on a pair of french doors through the addition of shootbolts top and bottom. A lever operated multipoint lock, it features 2 hardened steel hooks, 2 brass roller cams, a reversible latch and an anti-saw deadbolt as standard. It suits all standard 92mm Pz handles - no special requirements. Lock case Steel acc. En 10149 zinc plated Face plate Steel acc. En 10149 Latch bolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 Deadbolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 Hook bolt Steel/ nickel plated En 12540 Spindle square Brass acc. DIN 1709 : Twin hardened steel, bi-directional hooks for security and adjustable roller cams for compression : Lever/Lever - Lever/Pad - One Lock - All Options : Option of standard lever/lever or day latch operation without modification, therefore reducing stock requirements : Option of adding shootbolts top and bottom for high security residential or french doors : Full french door suite available within the range, including slave door lock with adjustable striker Handle-spring housing Zinc diecasting acc.. 1743-2 Handle-spring Steel acc. En 2076 Drive gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2 /nickel plated En 12540 Tumber spring Steel acc. DIN 2076-D Description Type Backset (mm) Hooks Rollers Part No. As 7921 W3 XL 35 2 2 047832 Normal action shootbolt Standard - - 046310J Box Quantity 5 172 AS 7921 2 Hook, 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 173
Technical Data Type 2 hook extendable Operation Lever/lever, Pz (mm) 92 Backset (mm) 25, 28, 30, 35, 40, 45 Faceplate (mm) 16 AS 7970 2 Hook A lever operated multipoint lock, AS 7970 features 2 hardened steel hooks, a reversible latch and an anti-saw deadbolt as standard and is suitable for many applications. In it s basic form it is a standard residential door lock, with shootbolts top and bottom it is an enhanced security lock for residential doors, and through the addition of shootbolts top and bottom it can be used as the master door lock on a pair of french doors. : Suits standard 92mm Pz handles Lock case Face plate Steel acc. En 10149 Latch bolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 Deadbolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 : Twin hardened steel hooks for security : Lever/Lever operation : Various backset options available : Option of adding shootbolts top & bottom for high security residential or french doors : Full french door suite available within the range, including slave door lock with adjustable striker Hook bolt Steel/nickel plated En 12540 Spindle square Brass acc. DIN 1709 Handle-spring housing Zinc diecasting acc.. 1743-2 /yellow bichromated En 12330 Handle-spring Steel acc. En 2076 Drive gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2 /nickel plated En 12540 Tumber spring Steel acc. DIN 2076-D Box Quantity 5 Description Type Backset (mm) Hooks Part No. AS7970 Standard 25 2 047840* AS7970 Standard 28 2 047842 AS7970 Standard 30 2 047844* AS7970 Standard 35 2 047846 AS7970 Standard 40 2 047848* AS7970 Standard 45 2 047850* Special Order Only * Shootbolt Set Security - - UNISBK 174 AS 7970 2 Hook : Door Locks : The Key 6 Hardware By Professionals For Professionals 175
Technical Data Type Operation 2 pin extendable Lever/ lever, Pz (mm) 92 Backset (mm) 25, 30, 35, 40, 45 Faceplate (mm) 16 Lock case Face plate Steel acc. En 10149 Latch bolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 Deadbolt Zinc diecasting acc. 1743-2 /nickel plated En 12540 Spindle square Brass acc. DIN 1709 Handle-spring housing Zinc diecasting acc.. 1743-2 Handle-spring Steel acc. En 2076 Drive gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2 /nickel plated En 12540 Tumber spring Steel acc. DIN 2076-D Box Quantity 5 176 AS 7370 2 Pin : Door Locks : The Key 6
AS 7370 2 Pin The AS 7370 is a multipoint lock designed primarily for use on residential doors or as the master door lock on a pair of french doors. The lock itself is a lever operated multipoint lock featuring 2 hardened pins, a reversible latch and an anti-saw deadbolt as standard. Optional : Pins throw 20mm : Suits standard 92mm Pz handles : Lever/Lever operation : Various backset options available : Option of adding shootbolts top and bottom for enhanced security residential or french doors : Full french door suite available within the range, including slave door lock with adjustable striker Description Type Backset (mm) Pins Part No. AS7370 Standard 30 2 046205* AS7370 Standard 35 2 046210 AS7370 Standard 40 2 046215* AS7370 Standard 45 2 046220 Shootbolt Set Security UNISBK Optional Hardware By Professionals For Professionals 177
Technical Data Type 2 Roller Operation Lever/lever Pz (mm) 92 Backset (mm) 25, 28, 30, 35 Faceplate (mm) 16 AS 7070 2 Roller The AS 7070 is a multipoint lock for use on residential doors where only a basic level of security is required, or as the master door lock on a pair of french doors. The lock itself is a lever operated multipoint lock featuring 2 roller cams, a reversible latch and an anti-saw deadbolt as standard. : Suits standard 92mm Pz handles : Lever/Lever operation Optional Lock Case : Various backset options available : Option of adding shootbolts top and bottom for enhanced security residential or french doors Face Plate Steel acc. En 10149 Latch Bolt Zinc diecasting acc. 1743-2/nickel plated En 12540 : Full french door suite available within the range, including slave door lock with adjustable striker Deadbolt Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Description Type Backset (mm) Rollers Part No. Tumbler Spring Steel acc. DIN 2076-D AS7070 Multipoint Lock Standard 25 2 046100* AS7070 Multipoint Lock Standard 28 2 046090* Box Quantity 5 AS7070 Multipoint Lock Standard 30 2 046105* AS7070 Multipoint Lock Standard 35 2 046110 Shootbolt Set Security UNISBK * Special order only Optional 178 AS 7070 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 179
Technical Data Type 2 hook 2 roller AS 4921 2 Hook, 2 Roller Multipoint door lock for use on residential door applications. Operation Lever/lever or lever/pad Pz (mm) 92 Backset (mm) 25, 28, 30, 35, 45 Faceplate (mm) 16 The lock is a lever operated multipoint lock featuring 2 hardened steel hooks, 2 brass roller cams, a reversible latch and an anti-saw deadbolt as standard. : Twin hardened steel hooks for security and adjustable roller cams for compression : Suits standard 92mm Pz handles Lock Case : Roller cams compression adjustable +/-1mm : Option of standard lever/lever or split spindle type operation Face Plate Steel acc. En 10149 Latch Bolt Deadbolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Tumbler Spring Steel acc. DIN 2076-D Box Quantity 5 Description Spindle Backset (mm) Hooks Rollers Part No. AS4921 Multipoint Lock Standard 25 2 2 047796* AS4921 Multipoint Lock Standard 28 2 2 047800 AS4921 Multipoint Lock Standard 30 2 2 047804* AS4921 Multipoint Lock Standard 35 2 2 047808 AS4921 Multipoint Lock Standard 45 2 2 047812 AS4921 Multipoint Lock Split Spindle 35 2 2 047834 Split Spindle Kit - 54/54 - - 059280 Split Spindle Kit - 54/64 - - 059281 Split Spindle Kit - 54/74 - - 059282 * Special order only 180 AS 4921 2 Hook, 2 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 181
Technical Data Type 2 hook Operation Lever/lever Pz (mm) 92 Backset (mm) 35, 45 Faceplate (mm) 16 M AS 4900 2 Hook Multipoint door lock for use on residential door applications. The lock is a lever operated multipoint lock featuring 2 hardened steel hooks, a reversible latch and an anti-saw deadbolt as standard. : Twin hardened steel hooks for security : Suits standard 92mm Pz handles Lock Case Face Plate Steel acc. En 10149 Latch Bolt Deadbolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Tumbler Spring Steel acc. DIN 2076-D Box Quantity 5 Description Type Backset (mm) Hooks Part No. AS4900 Multipoint Lock Standard 35 2 047786 AS4900 Multipoint Lock Standard 45 2 047790* * special order only 182 AS 4900 2 Hook : Door Locks : The Key 6 Hardware By Professionals For Professionals 183
Technical Data Type 2 Pin AS 4350 2 Pin Multipoint door lock for use on residential door applications. Operation Lever/Lever Pz (mm) 92 Backset (mm) 25, 28, 30, 35, 40, 45 Faceplate (mm) 16 or 24mm U The lock is a lever operated multipoint lock featuring 2 pins, a reversible latch and an anti-saw deadbolt as standard. : Pins throw 20mm : Pins secured against sawing with hardened steel pins : Suits standard 92mm Pz handles Lock Case : Range of backsets available : 24mm U track faceplate version also available Face Plate Steel acc. En 10149 Latch Bolt Deadbolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Description Type Backset (mm) Pins Part No. Part No. Tumbler Spring Steel acc. DIN 2076-D 24mm U 16mm Flat AS A350 Multipoint Lock Standard 25 2-047440* Box Quantity 5 AS A350 Multipoint Lock Standard 28 2-047445 AS A350 Multipoint Lock Standard 30 2-047450* AS A350 Multipoint Lock Standard 35 2 047545* 047455 AS A350 Multipoint Lock Standard 40 2-047460 AS A350 Multipoint Lock Standard 45 2 047555* 047465 * special order only 184 AS 4350 2 Pin : Door Locks : The Key 6 Hardware By Professionals For Professionals 185
Technical Data Type 4 Roller Operation Lever/Lever Pz (mm) 92 Backset (mm) 25, 28, 30, 35, 40, 45 Faceplate (mm) 16 or 24mm U AS 4050 4 Roller The AS 4050 is a multipoint lock for use on residential doors where only a basic level of security is required. The lock is a lever operated multipoint lock featuring 4 brass roller cams, a reversible latch and an anti-saw deadbolt as standard. : Roller cams compression adjustable +/-1mm : Suits standard 92mm Pz handles Lock Case : Range of backsets available : 24mm U track faceplate version also available Face Plate Steel acc. En 10149 Latch Bolt Deadbolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Description Type Backset (mm) Rollers Part No. Part No. Tumbler Spring Steel acc. DIN 2076-D 24mm U 16mm Flat AS 4050 Multipoint Lock Standard 25 4 047410* 047320 Box Quantity 5 AS 4050 Multipoint Lock Standard 28 4 047415* 047325 AS 4050 Multipoint Lock Standard 30 4 047420* 047330 AS 4050 Multipoint Lock Standard 35 4 047425 047335 AS 4050 Multipoint Lock Standard 40 4 047430* 047340 AS 4050 Multipoint Lock Standard 45 4-047345 * special order only 186 AS 4050 4 Roller : Door Locks : The Key 6 Hardware By Professionals For Professionals 187
Technical Data Type 2 Pin Operation Cylinder/key Pz (mm) 92 Backset (mm) 25, 28, 30, 35, 40, 45 AS 2300 2 Pin High security locking system for residential doors which features the day latch facility usually associated with traditional rim latches but has the vital benefit of multipoint locking and sealing. The lock is a key/cylinder operated multipoint lock featuring 2 round bolts a reversible latch and an anti-saw deadbolt as standard. Faceplate (mm) Lock Case 16 or 24mm U : Key/cylinder operated with day latch facility : Deadbolt has double throw (20mm) : Round bolts provide compression and an element of security : Suits standard 92mm Pz handles Face Plate Steel acc. En 10149 Latch Bolt Zinc diecasting acc. 1743-2/nickel plated En 12540 : Available in a range of backsets and with a 24mm U-track faceplate to special order Deadbolt Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Description Type Backset (mm) Pins Part No. Part No. Tumbler Spring Steel acc. DIN 2076-D 24mm U 16mm Flat AS 2300 Multipoint Lock Standard 25 2-045400* Box Quantity 5 AS 2300 Multipoint Lock Standard 30 2-045402* AS 2300 Multipoint Lock Standard 35 2 045428 045404 AS 2300 Multipoint Lock Standard 40 2 045432* 045406* AS 2300 Multipoint Lock Standard 45 2 045436* 045408 * Special order only to place your order simply call our sales team directly on 01327 312 400 188 AS 2300 2 Pin : Door Locks : The Key 6 Hardware By Professionals For Professionals 189
Technical Data Type 4 Roller Operation Cylinder/Key Pz (mm) 92 Backset (mm) 25, 30, 35, 40, 45 Faceplate (mm) 16 or 24mm U AS 8250/9800 4 Roller Locking system for residential doors where only a basic level of security is required. The lock is a cylinder/key operated multipoint lock featuring 4 brass roller cams, a reversible latch and an anti-saw deadbolt as standard. : Key/cylinder operated with day latch facility : Roller cams compression adjustable +/-1mm Lock Case : Suits standard 92mm Pz handles : Available in a range of backsets and with a 24mm U-track faceplate to special order Face Plate Steel acc. En 10149 Latch Bolt Deadbolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Description Type Backset (mm) Rollers Part No. Part No. Tumbler Spring Steel acc. DIN 2076-D 24mm U 16mm Flat AS 8250/9800 Multipoint Lock Standard 25 4 045100* 045322 Box Quantity 5 AS 8250/9800 Multipoint Lock Standard 30 4 045105* 045324 AS 8250/9800 Multipoint Lock Standard 35 4 045112 045232 AS 8250/9800 Multipoint Lock Standard 40 4 045136* 045242* AS 8250/9800 Multipoint Lock Standard 45 4 045152* 045252 * Special order only 190 AS 8250/9800 4 Roller : Friction Stays : The Key 6 Hardware By Professionals For Professionals 191
Technical Data Type Operation Slave Lock Lever/Lever Pz (mm) 92 Backset (mm) 25, 35 Faceplate (mm) 16 Lock Case Face Plate Steel acc. En 10149 Latch Bolt Deadbolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/nickel plated En 12540 Tumbler Spring Steel acc. DIN 2076-D Box Quantity 5 192 AS 7000 Slave: Door Locks : The Key 6
AS 7000 Slave The AS7000 multipoint lock is designed to be utilised as the slave door lock on a pair of french doors. : Complements the following master door locks: : AS 7922 : AS 7921 : AS 7970 : AS 7370 : AS 7070 : Shootbolts throw 18mm : Suits standard 92mm Pz handles : Available in a range of backsets Description Type Backset Part No AS 7000 Slave Lock - 25 046046 AS 7000 Slave Lock - 28 046047 AS 7000 Slave Lock - 35 046048 Shootbolt Set Security - UNISBK Hardware By Professionals For Professionals 193
Technical Data Type Operation 2 Hook, 4 roller Stable door M-Fear Stable Door Stable doors are becoming increasingly popular as a replacement for the traditional residential door - particularly as rear or kitchen doors. Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 The M-Fear stable door locking system utilises strong, cast steel hooks for security combined with adjustable roller cams for weather sealing. The top half of the multipoint locking system is equipped with a cast steel hook, reversible latch, deadbolt and two roller cams. While the bottom half of the lock is equipped with cast steel hook, two roller cams and top shootbolt to secure into upper leaf. Faceplate & Operating Gear Gearbox/Cover FE490 roller annealed 15.9 x 2.5 A VFMG zincotropicalized 12-15 VM Aluzinc B500 to EN 10215 hot zinc plated (zinc alloy 5590) - 20 VM To perfectly complement it s smooth and secure operation Mila have developed a range of stylish furniture in a number of attractive finishes including Chrome and Gold (PVD). Zinc Alloy Components 2410 ZNAL 4 CV1 to EN 1774 (UNI 3717) Sintered Components SINT D30-39 to DIM 30910 zinc platedwhite 8 VM Internal Zinc Components FE390-490 cold rolled to EN 10204 Screws Box Quantity 10 UNI 8109 - UNI 8113 coated FEZN5UM Description Type Quantity Required Part No. M-Fear Stable Door Lock 1 047070 Striker Centre, Right Hand 1 420000C Striker Centre, Left Hand 1 420006C Striker Hook/pin 2 420031C Striker Roller cam 4 contact Mila sales team Top Handle Chrome 1 050301 Top Handle Brass plated 1 050303 Top Handle Gold (PVD) 1 050304 Top Handle Black 1 050307 Top Handle White 1 050308 Bottom Handle Chrome 1 056854 Bottom Handle Brass 1 056855 Bottom Handle White 1 056856 For packers and cylinder information please contact the Mila sales team on 01327 312 400 194 M-Fear Stable Door : Door Locks : The Key 6 Hardware By Professionals For Professionals 195
Technical Data Type 2 Pin AS 2300/W20 Stable Door Multipoint lock designed specifically for use on stable doors. Operation Stable Door Pz (mm) 92 Backset (mm) 35 Faceplate (mm) 16 : Top locking part equipped with round bolt, reversible latch and deadbolt with anti-saw pins : Bottom locking part equipped with round bolt, deadbolt with anti-saw pins and top shootbolt to secure into upper leaf : Both locking parts key/cylinder operated Lock Case Face Plate Steel acc. En 10149 Latch Bolt Zinc diecasting acc. 1743-2/nickel plated En 12540 Deadbolt Zinc diecasting acc. 1743-2/nickel plateden 12540 Spindle Square Brass acc. DIN 1709 Handle-Spring Housing Zinc diecasting acc.. 1743-2/ yellow bichromated En 12330 Handle-Spring Steel acc. DIN 2076-D Operation To close and lock from inside/outside: close bottom part and thereafter bottom part, or both parts together. Turn cylinder on top part and bottom part. Shootbolts and deadbolts engage in strikers. Door is now fully locked. To open top door only from inside/outside: turn cylinder on top door. Deadbolt and shootbolt disengage from strikers. Latch can be retracted by handle or cylinder to release top door. To open both top and bottom doors from inside/outside: turn cylinder on both doors. Deadbolts and shootbolt disengage from strikers. Latch on top door can be retracted by handle or cylinder to release complete door. Drive Gear Steel acc. En 10149 Slider Tumbler Zinc diecasting acc. 1743-2/ nickel plated En 12540 Tumbler Spring Steel acc. DIN 2076-D Box Quantity 5 Description Backset (mm) Part No. AS2300/W20 Stable Door Lock 35 U045448 - features longer vertical shootbolt pin to project through transom section AS2300/W20 Stable Door Lock 35 045448 - suits profiles with eurogroove detail on dummy mullion end-cap 196 AS 2300/ W20 Stable Door : Door Locks : The Key 6 Hardware By Professionals For Professionals 197
Technical Data Single Doors Rebate Size Minimum Width Maximum Width Double Doors Rebate Size Minimum Width Maximum Width 700mm 2400mm 1500mm 2400mm Single Door/Master Leaf Specification 35mm backset multipoint lock featuring 2 pins with 20mm throw, reversible latch and deadbolt. Slave Door Specification 35mm backset slave door lock with shootbolts top and bottom. T Mila Pin Panic Lock The MILA Pin Panic system provides enhanced security through a multipoint lock with twin 20mm throw pins with a reversible latch and deadbolt. Safety and ease of exit is satisfied through a smooth locking mechanism and panic bar. The MILA Pin Panic Bar kit has been tested and certified to EN 1125, European standard for Panic Exit Devices. While the emphasis in the standard is on safe exit rather than security it is possible to effectively combine the two. The system is available in kits for both single and double doors and is suitable for use on PVCU, timber and aluminium. : High security panic door hardware for use on PVCU, timber and aluminium doors : Kits available for both single and double doors : Multipoint lock featuring 2 x pins for security : Internal operation via panic bar : Panic bar finished in exit green : Non-handed for right or left hand doors : External access kit available : Multipoint lock and Panic Bar tested and certified to EN 1125 : EN 1125 Classification: 3 7 6 0 1 3 2 2 A Description Part No. Master / Single Door Kit 043870 Slave Door Kit 043875 External Access Kit 043880 Master / Single Doors Slave Door 198 Mila Pin Panic Lock : Door Locks : The Key 6 Hardware By Professionals For Professionals 199