VERTICAL WALL MOUNT INSTALLATION INSTRUCTIONS NOTE: THE JUNCTION BOXES MUST BE SOLIDLY FIXED TO THE WALL BEFORE PROCEEDING TO THE INSTALLATION. PART LIST A Mounting points F Wire nuts B Junction box (by others) G Junction box cover plate C Mounting bracket H Fixture D Power feed wires I Screws E Fixture wires ANCHOR POSITIONS Refer to anchor positioning template on pages 3-5 Row configuration and mounting points guide is available for download at: A Warning: Each Axis Lighting Fixture passed a quality test. If any LED board are not working properly please turn fixture off immediately and contact Axis technical support at 1-800-263-2947 for immediate assistance. for mounting points please consult shop drawing B 1 Locate the mounting points (A) and junction box (B). Maintain correct mounting spacing as per shop drawings. A 1 / 5
VERTICAL WALL MOUNT INSTALLATION INSTRUCTIONS I Cb G E B D H D F 2 3 4 Fasten wall part of the mounting brackets () to the wall. Connect wires (D) from junction box (B) with the wires from the fixture (E) using wire nuts (F). Cover junction box with cover plate (G). Fasten mounting brackets (Cb) to fixture (H). Mount fixture (H) to the wall by fastening the fixture mounting bracket (Cb) into the wall bracket () and secure with suppllied screws (I). 2 / 5
4' FIXTURE - END TO END LAMPING 32 " 3 / 5
8' FIXTURE - END TO END LAMPING 80 " 4 / 5
12' FIXTURE - END TO END LAMPING 112 " 5 / 5