M1 D-Coding Automation Technology 85 series Screw locking acc. to DIN EN 61076--101 und 109 Degree of protection IP67 Moulded versions Easy Assembly Excellent EMC shielding Versions with shielding rings/cable clamp Angled connectors adjustable in positions Male cable connector, CAT 5, screw clamp termination, with shielding ring, shieldable ~ 6 Contacts Cable outlet Ordering-No. 6 8 mm 99 79 810 0 Ø 0 SW 16mm SW 1mm/ SW 16mm Male cable connector, CAT 5, screw clamp termination, iris type spring, shieldable 5 8 mm 99 77 810 0 ~ 70 Ø 0 SW 16mm SW 1mm Male cable connector, CAT 5, screw clamp termination, with shielding ring, stainless steel version, shieldable 5,5 8,6 mm 99 79 995 0 ~ 6 Ø 0 SW 19mm SW 19mm Male cable connector, CAT 5, crimp connection, shieldable 5 8 mm 99 71 810 0 ~ 7 Ø 0, SW 16mm SW 1mm Crimp contacts see page 159 Specifications Contacts Wire gauge max. 0,75 mm (max. AWG 0), see crimp contacts page 161, PROFINET 0, mm (AWG ) Mechanical operation > 100 Mating cycles Temperature range 0 C /+ 85 C, PROFINET 5 C /+ 85 C Rated voltage 50 V Pollution degree Rated current (0 C) A Contact plating Au (Gold) Material of housing zinc diecasting nickel plated, PUR 157 More versions and information on www.binder-connector.com
M1 D-Coding Automation Technology 85 series Male angled connector, CAT 5, screw clamp termination, with shielding ring, shieldable 0 Contacts Cable outlet Ordering-No. 6 8 mm 99 79 80 0 ~ 5 different 90 positions SW 1mm Male angled connector, CAT 5, screw clamp termination, iris type spring, shieldable 0 5 8 mm 99 77 80 0 ~ ~ 6 SW 1mm different 90 positions Male angled connector, CAT 5, crimp connection, shieldable 5 8 mm 99 71 80 0 0 ~ ~ 6 different 90 positions SW 1mm Crimp contacts see page 159 Male cable connector, shielded, PROFINET Ø 0, 8,5 1 L Contacts Cable length Ordering-No. x 0, m 77 59 0000 5070 000 5 m 77 59 0000 5070 0500 10 m 77 59 0000 5070 1000 Ø Ø Specifications PROFINET Cable Contacts Wire gauge x x AWG Material jacket PUR Insulation of wire Polyolefin Design of wire (mm) 7 x 0, (AWG ) Cable diameter (mm) 6,7 Resistance of wire 55 Ω/Km (0 C) Temperature range cable in move 0 C /+ 60 C Temperature range cable fixed 0 C /+ 80 C Bending radius cable in move min. 15 x d Bending radius cable fixed min. 5 x d Bending radius (at 10 x D) Mio. Permitted acceleration m/s Traverse path horizontal 5 m/s 5 m Traverse path vertical 5 m/s 5 m Traverse speed At 5 m horizontal traverse up to 00 m/min Remark In chain flex application or when stressed machanically +60 C. Approval PROFINET, UL/CSA UL-style AWM 06 158
M1 D-Coding Automation Technology 85 series Female cable connector, CAT 5, screw clamp termination, with shielding ring, shieldable Contacts Cable outlet Ordering-No. 6 8 mm 99 70 810 0 ~ 57 Ø 0 SW 16mm SW 1mm/ SW 16mm Female cable connector, CAT 5, screw clamp termination, iris type spring, shieldable 5 8 mm 99 78 810 0 ~ 65 Ø 0 SW 16mm SW 1mm Female angled connector, CAT 5, screw clamp termination, with shielding ring, shieldable 5,5 8,6 mm 99 70 80 0 0 ~ 8 ~ 56 different 90 positions SW 1mm Female angled connector, CAT 5, screw clamp termination, iris type spring, shieldable 5 8 mm 99 78 80 0 0, ~ 7 ~ 6 different 90 positions SW 1mm Female cable connector, shielded, PROFINET 1 L Contacts Cable length Ordering-No. m 77 50 0000 5070 000 x 0, 5 m 77 50 0000 5070 0500 10 m 77 50 0000 5070 1000 Ø Ø Wire gauge AWG Ordering-No. Male contact, PU 100 pieces Ø, 11, 8,6 Ø,6 Ø, 0,1 mm 0, mm 6 61 1 16 0, mm 0,5 mm 0 61 115 16 0,75 mm 1,0 mm 18 16 61 15 16 1,0 mm mm 16 61 16 16 159
M1 D-Coding Automation Technology 85 series Component part drawing Cable connectors, with shielding ring, shieldable Female insert/ Male insert Insulating sleeve tightly built into coupling sleeve Shielding ring O-ring Seal Pinch ring Pressing screw Cable connectors, with iris type spring, shieldable Female insert/ Male insert Insulating sleeve, Sleeve, Pressing spring, O-ring, Pinch ring, Seal, Pressing screw are premounted Angled connectors, shieldable Female insert/ Male insert Insulating sleeve tightly built into coupling sleeve Housing Seal Cover Shielding ring O-ring Seal Pinch ring Pressing screw Angled connectors, with iris type spring, shieldable Female insert/ Male insert Insulating sleeve, Housing, Pressing spring, O-ring, Pinch ring, Seal, Pressing screw are premounted O-ring Cover Contact arrangements male insert (mating side) contacts 6 Contact arrangements female insert (mating side) 6 Colour of wire, moulded cable and panel mount connectors 1 white-orange orange white-green green Shield = Coupling ring 1 1 160
M1 D-Coding Automation Technology 85 series Male receptacle for PCB assembly,1,5,5 15,5 9,5 Contacts Ordering-No. 99 71 00 0 99 71 01 0 with shielding sheet,5 15,5 9,5 6 9 M1 x 1 8,5 15,5 15,5,1 10 min. max. 15 View of mating side Male angled receptacle for PCB assembly 99 71 0 0 99 71 0 0 with shielding sheet,1 7 min. max.,5 15 Male panel mount connector, SMT, with housing, shieldable View of mating side Contacts Mounting height Ordering-No. 9 mm 99 71 01 0 9 Male panel mount connector, SMT, with housing, shieldable 09 071 601 0 1,8 Ø 9,5 0,5, Male panel mount connector M16, with PROFINET-cable, shielded Contacts Cable length, PUR Fix. thread Ordering-No. 0,5 m M16 x 70 7 705 0 0 1 8,5 500 M16 x Ø 6,7 Male panel mount connector, front fastened, with PROFINET-cable, shielded 0,5 m 70 7 706 0 11 500 Ø 6,7 Hexagonal nut enclosed loose 161
M1 D-Coding Automation Technology 85 series Female panel mount connector with single wires 00 1 00 7,5,8 Contacts Fix. thread Fastened from back side Front fastened 76 016 0011 000 000 76 056 1011 000 000 M16 x 76 06 0011 000 000 / M16 x Ø 0 max.,5 fastened from back side front fastened Female panel mount connector, dip-solder 1 6 5,5,8 7,5 5 86 016 0000 000 86 056 1000 000 7,5 5,5,8,1,5 16 9,5 1 9,5 8,5 15,5 6,5 15,5 Ø 0 PG9,6,6 Ø 0,6 11 max.,5 +5pol. 8+1pol. Ø 0,6 Female panel mount connector, front fastened, dip-solder, with shielding sheet fastened from back side front fastened Contacts Fix. thread Ordering-No. 86 056 110 000 5 5,7 1,75 Female receptacle for PCB assembly Hexagonal nut enclosed loose Contacts Ordering-No. 99 7 00 0 99 7 01 0 with shielding sheet 10 min. max. 15 View of mating side Female angled receptacle for PCB assembly, for PCB assembly 99 7 0 0 99 7 0 0 with shielding sheet,1,5 min. 10 7 max.,5 1,6 View of mating side Specifications Panel mount connector Contacts Wire gauge max. 0,5 mm (max. AWG ), AWG Mechanical operation > 100 Mating cycles Temperature range 0 C /+ 85 C Rated voltage 50 V Pollution degree Rated current (0 C) A Contact plating Au (Gold) Material of housing CuZn (brass nickel plated), zinc diecasting nickel plated 1) Standard wire length is 00 mm for 76-order-numbers. Other length on request. 16
M1 D-Coding Automation Technology 85 series Female panel mount connector, SMT, with housing, shieldable Female panel mount connector, SMT, shieldable 1,8 9 7 Ø 8, 17 6 9 17 1 17 M1 x 1 M1 x 1, Contacts Mounting height Ordering-No. 9 mm 99 7 01 0 1 mm 99 7 0 0 09 07 601 0 Female panel mount connector M16, with PROFINET-cable, shielded Contacts Cable length, PUR Fix. thread Ordering-No. 0,5 m M16 x 70 7 705 0 1 8 500 M16 x Ø 6,7 Female panel mount connector, front fastened, with PROFINET-cable, shielded 8 7,5 500 0,5 m 70 7 706 0 Ø 6,7 Adapter, lead-through for control cabinet, shielded Hexagonal nut enclosed loose Contacts Ordering-No. 09 55 00 0 57 M0 x Ø 0, SW mm max. 9 min. 1 SW 18 mm SW 7mm Adapter, lead-through for control cabinet, female/female, shielded 56 1 09 56 00 0 Ø 7 M0 x Ø 0 Ø 9 SW mm SW 18 mm SW 7mm 16
M1 D-Coding Automation Technology 85 series Panel cut out Panel mount connector With flats as antirotation device With bore hole C B With thread to screw in A PG 1,5 M16x M0x A PG 1,5 M16x M0x B 16, 17,0 1,0 C 15, 0,5 16,1 0,1 D 1,5 1,5 D 1 x alternativ Metal housing 6,5 Nm Plastic housing,75 Nm Panel mount connector, front fastened With flats as antirotation device With bore hole M16x C 15, 16,1 C 1,5 1 x max.,5 Metal housing 6,5 Nm Plastic housing,75 Nm Panel mount connector, positioning possible /M16 x Metal housing 6,5 Nm Plastic housing,75 Nm Panel mount connector, screw clamp termination With bore hole With thread to screw in 1 x Ø 0,1 M0 x M0 x Nm min. max.,5 Panel mount connector, with thread M1,1 min. max.,5 6,5 Nm Lead-through for control cabinet With bore hole 0,1 1-1, Nm 18, min. 1 max. 9 Accessories see page 17 10 16