Fendering Floating Fenders We will always endeavour to provide the most economical and efficient solution, on time and on budget
Fendercare Marine provides a comprehensive range of deck and quayside products and services through our network of bases worldwide. Our deck equipment is manufactured to OCIMF guidelines, where relevant, ensuring quality every time. Utilising state of the art 3D Finite Element Analysis we are able to customise solutions to meet your needs. We also specialise in the specification and manufacture of emergency and barge towing equipment. Our quayside solutions range from bollards to quick release mooring hooks and total jetty management systems. The latest addition to our bollard range - the triton, combines innovative design with advanced materials, resulting in considerable cost savings. We also design and produce bespoke solutions for specific applications, just call one of our team to find out how we can help. We also stock a diverse range of marine hardware including anchors, shackles, swivels, chains and fittings, available new, used and reconditioned. Whatever your requirements, we will always endeavour to provide the most economical and efficient solution, on time and on budget.
Use of Deck Hardware on a Typical Vessel Layout
A3-2446 102T and A3-2184 204T SWL Deck Mounted Panama Chock 600x450 LRS, ABS, BV and DNV Type Approved OCIMF Type. Also available as 250T and 800T on request.
A3-1040 Deck Mounted Panama Chock 400x270 OCIMF Type for ship-to-ship transfers. R135 280 270 560 R167 400 356 712
A3-1608 102T and A3-1477 204T SWL Bulwark Mounted Panama Chock 600x450 Double Curved Plate Type LRS,ABS, BV and DNV Type Approved OCIMF Type. 600 R310 450 1010 665 1160 504 Also available with hatch if required. 112
A3-2684 Bulwark Mounted Panama Chock 400x270 To OCIMF mooring equipment guidelines. R220 270 710 500 400 110 840 430
Chocks to DIN Standard 81915 30222 Bulwark Mounted Panama Chock to DIN Standard 81915 Type kn W1 W2 L1 B1 R1 R2 S2 H1 B2 A3 30 200 140 450 390 R 125 R 70 7 250 275 A5 50 250 180 550 480 R 150 R 90 8 300 340 A8 80 320 225 680 585 R 180 R 112.5 9 360 415 A12 120 400 270 840 710 R 220 R 135 10 440 500 A20 200 500 320 1020 840 R 260 R 160 11 520 595 A32 320 600 400 1300 1100 R 350 R 200 20 700 800 30218 Deck Mounted Chock to DIN Standard 81915 Type kn W1 W2 L1 B1 R1 R2 S2 H1 E C3 30 200 140 450 390 R 125 R 70 7 250 195 C5 50 250 180 550 480 R 150 R 90 8 300 240 C8 80 320 225 680 585 R 180 R 112.5 9 360 292.5 C12 120 400 270 840 710 R 220 R 135 10 440 355 C20 200 500 320 1020 840 R 260 R160 11 520 420 C32 320 600 400 1300 1100 R 350 R 200 20 700 550
Chocks to JIS Standard 31069 Deck Mounted Panama Chock to JIS F 2005 Standard L L1 H H H1 B B Nominal Size Dimensions (mm) L L1 H H1 B Mass (kg) 100 100 170 76 141 60 3.7 150 150 250 110 205 90 10.5 200 200 340 150 280 120 24 250 250 434 200 372 160 48 300 300 528 250 464 200 82 350 350 600 250 485 220 103 400 400 672 250 506 240 136 450 450 746 250 528 260 184 500 500 820 250 550 280 232 31073 Deck Mounted Panama Chock to JIS F 2017 Standard L 260 180 H1 H2 Nominal Size Dimensions (mm) L L1 L2 H1 H2 Mass (kg) 310 310 708 652 639 541 253 360 360 760 704 640 542 289 400 400 804 750 642 545 323 450 450 856 802 643 547 351 500 500 908 854 644 549 395 L2 358 L1 31066 Bulwark Mounted Panama Chock to JIS F 2017 Standard 2H H1 Nominal Dimensions (mm) Mass Size L L1 H H1 H2 B (kg) 150 150 300 110 260 202 129 15 200 200 368 150 318 250 143 21 250 250 430 200 380 308 155 27 300 300 500 250 450 372 169 43 350 350 560 250 460 378 179 51 400 400 632 250 482 394 195 77 450 450 700 250 500 406 209 102 500 500 760 250 510 412 219 115 L L1
A3-1809 102T and A3-1800 204T SWL Smit Bracket LRS, ABS, BV and DNV Type Approved. Handing to be stated when ordered as shown or opposite hand. Underdeck stiffening to be in accordance with the appropriate classification society requirements and approved by the classification society surveyor. A E I G F Open link H D B Corners R 75 C Chain shown for reference only Pear Link Enlarged Stud Link J K L Type A B C D E F G H I J K L 102T 700 600 420 320 242 153 92 100 25 388 127 200 204T 1150 800 500 400 305 170 135 150 40 508 155.5 223 Also available as 250T and 800T on request.
A3-1607 102T and A3-1455 204T SWL Chain Stopper and Plinth Arrangement LRS, ABS, BV and DNV Type Approved. OCIMF Tongue Type. Plinth and stopper can be supplied separately. 885 N.T.S. A Centre Line Chain 215 B D C E G H F I J K Type A B C D E F G H I J K 102T 650 380 2400 542 280 800 842 823 504 624 134 204T 898 500 3000 715 358 1040 1090 1029 630 810 175 Also available as 250T on request.
A3-3086 100T and 200T SWL Tug Escort Bollard OCIMF, DNV, LRS, BV and ABS design assessed. As recommended for ship fittings. For use with tugs, escorting or high load operations. Often used in conjunction with the OCIMF 600x450 deck chock. Ø750 Ø630 250 400 W.SQ. W.SQ. Type W (mm) 100T 1000 200T 1200
A3-2831 Cruciform Bollard The bollard can be loaded with one towing rope laid in a single sling over the bitt and with a breaking strength not exceeding the values in the table. As recommended by OCIMF for use at the manifolds whilst carrying out ship-to-ship operations. ØA E ØB C F G D SQ. Max. Load (tonne) A B C D E F G 25 273 140 580 500 657 260 125 40 324 168 725 630 825 330 150 50 350 194 820 720 881 350 165 64 406 219 950 800 1013 410 175 80 457 254 1070 900 1104 450 185 92 500 300 1200 1000 1220 500 200
A3-1850 Bollard BSMA 12 Design A The bollard can be loaded with two mooring ropes each with a breaking strength not exceeding the values in the tables. Wound in figure of eight fashion, approx. five turns per bitt. The bollard can be loaded with one towing rope laid in a single sling over one of the bitts and with a breaking strength not exceeding the values in the table. ASSEMBLY ON SHIP 1. Position the base onto the finished deck location 2. Insert the bitt tubes into the base 3. Raise the base plate and weld bitts to deck 4. Lower baseplate and weld to bitts and deck. ØD1 Edges Rounded ØD2 = = H2 H1 = L2 = B L1 Type Max. Bollard Load (tonne) Tube Plate L1 L2 H1 H2 B D3 Est. Weight (kg) Mooring Towing D1 D1 100 3 6 114 100 450 250 150 75 150 150 25 125 4 8 140 125 560 315 190 80 190 190 37 160 5 10 168 160 720 400 250 90 250 225 59 200 8 16 219 200 900 500 300 100 300 265 86 250 12 24 273 250 1130 630 380 125 380 325 166 315 20 40 324 315 1430 800 480 150 480 400 311 400 32 64 406 400 1800 1000 600 175 600 480 626 450 40 80 457 450 2025 1125 675 185 675 520 825 500 46 92 508 500 2250 1250 750 200 750 600 965 550 54 108 559 550 2475 1375 825 210 825 650 1371 630 70 140 610 630 2830 1570 940 225 940 730 1686 710 82 164 711 720 3200 1750 1050 250 1050 840 2295 800 100 200 813 820 3600 2000 1200 275 1200 950 3126
A3-2742 Bollard BSMA 12 Design B The bollard can be loaded with two mooring ropes each with a breaking strength not exceeding the values in the tables. Wound in figure of eight fashion, approx. five turns per bitt. The bollard can be loaded with one towing rope laid in a single sling over one of the bitts and with a breaking strength not exceeding the values in the table. ASSEMBLY ON SHIP Weld prefabricated bollard directly onto deck. D1 Edges Rounded D2 = = H2 H1 = L2 = B L1 Type Max. Bollard Load (tonne) Tube Plate L1 L2 H1 H2 B D2 Est. Weight (kg) Mooring Towing D1 D1 100 3 6 114 100 450 250 150 75 150 150 30 125 4 8 140 125 560 315 190 80 190 190 40 160 5 10 168 160 720 400 250 90 250 225 66 200 8 16 219 200 900 500 300 100 300 265 97 250 12 24 273 250 1130 630 380 125 380 325 145 315 20 40 324 315 1430 800 480 150 480 400 309 400 32 64 406 400 1800 1000 600 175 600 480 735 500 46 92 508 500 2250 1250 750 200 750 600 1148 630 70 140 610 630 2830 1570 940 225 940 730 1673 710 82 164 711 720 3200 1750 1050 250 1050 840 2822 800 100 200 813 820 3600 2000 1200 275 1200 950 3819
A3-1010 Bollard VIS 1 Standard Suitable for wire or rope with a breaking strain of F tonnes when cross belayed on the bollard. When belaying on one bitt only, approx. 2 x F is valid (see table below for F values). D1 Edges rounded D2 H2 H1 T1 H3 = L2 = B1 L1 Type F D1 D2 L1 L2 H1 H2 H3 B1 T1 Weight (kg) 100 5 108 160 600 350 200 100 65 210 10 35 150 10 159 210 800 500 275 100 90 260 10 58 200 15.5 219 275 950 600 350 100 115 330 10 98 250 20 273 335 1150 750 400 110 130 370 10 134 300 28 324 390 1350 900 475 110 155 420 12.5 205 350 32 355 425 1500 1000 535 110 175 470 12.5 250 400 40 406 480 1650 1100 600 125 200 540 14.2 355 450 54 457 530 1800 1200 650 125 215 600 16 490 500 60 508 585 1950 1300 700 125 230 650 16 580 550 68 559 640 2100 1400 750 125 250 700 16 675
A3-5361 Horncleat A standard range of cleats made to order. A E R C G F L x B Type NSN number A L B C E F G R 1 2040-99-419-5067 190 110 50 50 15 65 10 15 2 2040-99-419-5069 255 140 75 65 20 85 15 25 3 2040-99-419-5068 305 180 95 75 25 110 15 30 4 2040-99-419-5070 380 210 115 90 30 130 20 35 123
A3-1226 Roller Fairlead To VIS 38 Specification Shaft preheated to 100 0 C prior to welding. Constructed from cast iron with self-lubricating synthetic bearing offering a long trouble-free life. D2 D1 H4 H1 H3 H2 S1 Base mounting plates priced separately on request D4 SHAFT D5 HOLE D3 S2 Type D1 D2 D3 D4 D5 H1 H2 H3 H4 S1 S2 P (tonne) 150 150 240 105 85 90 158 5 25 40 8 6 15.8 200 200 310 130 110 115 190 5 25 40 8 6 19.8 250 250 380 150 130 135 245 6 25 40 8 8 28.5 300 300 440 170 150 155 270 7 35 50 8 8 33.6 350 350 500 190 170 175 294 7 35 50 10 10 44.8 400 400 560 200 180 185 332 7 35 50 12 12 58.0 450 450 630 225 205 210 341 7 35 50 12 12 64.2 500 500 680 245 225 230 360 7 40 50 15 15 84.3
A3-1330 Pedestal Roller Fairlead To VIS 38 Specification Roller constructed from cast iron with self-lubricating synthetic bearing offering a long trouble-free life. Base made from rolled steel plate. ØC ØD 45º H E B ØA H = 400 600 800 1000 1200 E = 400 600 800 1000 1200 P Type A A A A A E E E E E B C D (tonne) 150 356 414 472 530 588 583 783 983 1183 1383 25 240 150 15.8 200 426 484 542 600 658 615 815 1015 1215 1415 25 330 200 19.8 250 496 554 512 670 728 670 870 1070 1270 1470 25 380 250 28.5 300 556 614 672 730 788 705 905 1105 1305 1505 35 440 300 33.6 350 616 674 732 790 848 729 929 1129 1329 1529 35 520 350 44.8 400 676 734 792 850 908 767 967 1167 1367 1567 35 570 400 58.0 450 746 804 862 920 978 776 976 1176 1376 1576 35 645 450 64.2 500 796 854 912 970 1028 793 993 1193 1393 1593 35 680 500 84.3
A3-1583 Multi-Angle Fairlead 2 Vertical Rollers, 2 Horizontal Rollers A standard design easily adapted to meet client specifications. Finished in proprietary primer, ready for installation. E A D G K F C B D H Type SWL (tonne) Rope Dia. (mm) A B C D E F G H K MAF100 4 16 200 100 310 100 580 210 420 565 830 MAF120 6 20 230 130 335 120 650 250 490 640 920 MAF140 8 24 250 150 360 140 750 290 550 715 1030 MAF160 12 28 250 150 385 160 810 330 590 765 1150 MAF180 16 32 300 180 410 180 920 370 680 850 1220 MAF200 20 36 300 200 450 200 1000 415 730 940 1310 MAF250 30 44 320 200 505 250 1140 515 850 1050 1430 Also available in other roller combinations.
31197 Swivel Head Fairlead Heavy duty single or double sheave swivel fairleads and balanced head swivel fairleads offer a variety of sizes suitable for use in most deck-mounted or flange-mounted marine-duty applications. M O N K K J E B F A Wire Rope Dia. (mm) Sheave Dia. (mm) A B E F J K M N O 26 254 356 356 530 680 127 129 20 114 275 32 305 660 505 665 890 152 154 32 124 360 38 406 760 760 867 1280 203 205 38 178 460 44 508 1016 915 1070 1485 254 256 45 220 560 52 610 1220 1068 1265 1792 305 307 48 265 650 64 762 1420 1370 1565 2080 381 383 60 325 800