Product Catalog
FSP Group is the leading switching power supplier in the world. Since established in 199, the company has drawn together its R&D expertise, sizeable production capacity and outstanding product quality to consistently excel in this competitive marketplace. FSP Group produces large selections of products to serve its OEM / ODM customers in LCD TV, LED Lighting, Medical, Industrial / Desktop computers and Servers. FSP Group has more than 8 branch offices worldwide, 4 manufacturing facilities and about 8,00 people throughout the world. With its broad range of products, FSP Group is uniquely positioned for strong growth on several long term trends and environment protection including green power products, higher energy-efficient conversion products, and highly electrical safety and reliable products. FSP Group s global presence in Taiwan, Brazil, China, Germany, Sweden, France, India, Japan, Korea, Russia, Turkey, UK, USA also provide our OEM / ODM customers with integrated global logistic. This translates to Door-to-Door service and faster time-to-market for product deliveries. Please check with your highly trained professional account manager on how to take advantage of our global logistic service for your business. Our current focus in FSP Group is to further enhance our green power products, expand market presence of FSP branded retail products, and extend our research and development effort on all our products. At FSP Group, we are not only focusing on building a bigger company, also a better one.
Online DSP-based digital control technology (IGBT) Highly reliable power devices Superior performance rectifier Advanced parallel functions Extremely wide input voltage range Compact design Full front access design Redundant fan design and fan failure detection function Self-diagnosis and self-test function Eco Mode 0
Knight K / Front Panel Knight K / Rear Panel LCD Panel On / Mute Button Turn on the UPS: Press and hold ON/Mute button for at least seconds to turn on the UPS. Mute the alarm: When the UPS is on battery mode, press and hold this button for at least seconds to disable or enable the alarm system. But it s not applied to the situations when warnings or errors occur. Up key: Press this button to display previous selection in UPS setting mode. Switch to UPS self-test mode: Press and hold ON/Mute button for seconds to enter UPS self-testing while in AC mode, ECO mode, or converter mode. Select Button Switch LCD message: Press this button to change the LCD message for input voltage, input frequency, battery voltage, output voltage and output frequency. It will return back to default display when pausing for 10 seconds. Setting mode: Press and hold this button for seconds to enter UPS setting mode when UPS is in standby mode or bypass mode. Down key: Press this button to display next selection in UPS setting mode. ON/Mute + Select Button Switch to bypass mode: When the main power is normal, press ON/Mute and Select buttons simultaneously for seconds. Then UPS will enter to bypass mode. This action will be ineffective when the input voltage is out of acceptable range. OFF/Enter Button Turn off the UPS: Press and hold this button at least seconds to turn off the UPS. UPS will be in standby mode under power normal or transfer to Bypass mode if the Bypass enable setting by pressing this button. Confirm selection key: Press this button to confirm selection in UPS setting mode. Knight Series Backup Time Model Knight 1K Knight K Knight K USB Communication Port RS- Communication Port SNMP Intelligent Slot option External Battery Connection only available for L model Output Circuit Breaker Output Receptacles Input Circuit Breaker AC Input Backup time / mins (Internal battery only) % Load 0% Load 7% Load 100% Load Config. 40 1 1 17 1 9. 10 8. 7Ah x 7Ah x 9Ah x 0 04
Champ K / Front Panel Champ K / Rear Panel LCD Panel On / Mute Button Turn on the UPS: Press and hold ON/Mute button for at least seconds to turn on the UPS. Mute the alarm: When the UPS is on battery mode, press and hold this button for at least seconds to disable or enable the alarm system. But it s not applied to the situations when warnings or errors occur. Up key: Press this button to display previous selection in UPS setting mode. Switch to UPS self-test mode: Press and hold ON/Mute button for seconds to enter UPS self-testing while in AC mode, ECO mode, or converter mode. Select Button Switch LCD message: Press this button to change the LCD message for input voltage, input frequency, battery voltage, output voltage and output frequency. It will return back to default display when pausing for 10 seconds. Setting mode: Press and hold this button for seconds to enter UPS setting mode when UPS is in standby mode or bypass mode. Down key: Press this button to display next selection in UPS setting mode. ON/Mute + Select Button Switch to bypass mode: When the main power is normal, press ON/Mute and Select buttons simultaneously for seconds. Then UPS will enter to bypass mode. This action will be ineffective when the input voltage is out of acceptable range. OFF/Enter Button Turn off the UPS: Press and hold this button at least seconds to turn off the UPS. UPS will be in standby mode under power normal or transfer to Bypass mode if the Bypass enable setting by pressing this button. Confirm selection key: Press this button to confirm selection in UPS setting mode. Champ Series Backup Time Model Champ 1K Champ K Champ K USB Communication Port SNMP Intelligent Slot option RS- Communication Port Output Receptacles Input Circuit Breaker AC Input Backup time / mins (Internal battery only) % Load 0% Load 7% Load 100% Load Config. 0 9 10 10 9Ah x 9Ah x 4 9Ah x 0 0
UPS LCDt Panel Insidet Overview Fault Info 1 Battery side : Remaining Backup Time Info Mute Operation 1 Snmp Solt Battery Mounting Plate Output Receptacles 4 4 Battery Cable Fan Ferrite Bead Main-board side : 1 Battery Info Input & Battery Voltage Info Mode Operation Info Output & Battery Voltage Info Load Info 1 4 Charging Board Communication Board USB & RS- function Heat Sink Inverter Function AC to DC & DC to AC Input Circuit Breaker over voltage protect Fan Flow Cover 4 7 AC Input 7 07 08
Knight 1K~K / Product Specification Champ 1K~K / Product Specification True double-conversion Microprocessor control optimizes reliability Input power factor correction Output power factor 0.8 Wide input voltage (110 V 00 V) Converter mode available ECO mode for energy saving Generator compatible Charger capacity expansion to A for long-run models Smart SNMP works well with either USB or RS- Comprehensive display allows easy monitoring and access of UPS status True double-conversion Microprocessor control optimizes reliability Input power factor correction Output power factor 0.9 Wide input voltage (10 V 00 V) Converter mode available ECO mode for energy saving Generator compatible Smart SNMP works well with either USB or RS- Comprehensive display allows easy monitoring and access of UPS status MODEL CAPACITY INPUT Nominal Voltage Voltage Range Frequency Range Phase Power Factor OUTPUT Output Voltage Voltage Regulation Frequency Range (Synchronized Range) Frequency Range (Batt. Mode) Overload Current Crest Ratio Harmonic Distortion AC Mode to Batt. Mode Transfer Time Inverter to Bypass Waveform (Batt. Mode) EFFICIENCY AC Mode BATTERY Battery Type Numbers Standard Model Typical Recharge Time Charging Current (max.) Charging Voltage Battery Type Numbers Long-run Model Charging Current (max.) Charging Voltage INDICATORS LCD Panel ALARM Low Battery Overload Fault PHYSICAL Dimension, D X W X H (mm) Standard Model Net Weight (kgs) Dimension, D X W X H (mm) Long-run Model Net Weight (kgs) ENVIRONMENT Humidity Noise Level MANAGEMENT Smart RS-/USB Optional SNMP Knight TW 1K (L) 1000 VA / 800 W 87% 8% Knight TW 1.K (L) 100 VA / 100 W Knight TW K (L) 000 VA / 100 W 90% 87% Knight TW K (L) 000 VA / 400 W 90% 89% 1 V / 7 AH 1 V / 9 AH 1 V / 7 AH 1 V / 9 AH 4 hours recover to 90% capacity 1.0 A 41.0VDC ± 1% 8.1 VDC ±1% 8.1 VDC ±1% Depending on the capacity of external batteries 1.0A/.0A/4.0A/.0 A ± 10% 7.VDC ± 1% 41.0VDC ± 1% 8.1 VDC ±1% 109.4VDC ±1% 8.1 VDC ±1% 109.4VDC ±1% 97 x 14 x 0 10 1 97 x 14 x 0 7 * Derate to 80% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 100/00/08VAC 00 / 08 / 0 / 0 / 40VAC 110-00 VAC ± % 40Hz ~ 70 Hz Single phase with ground 0.99 @ nominal voltage (100% load) 00/08/0/0/40VAC ± 1% 47~ Hz or 7 ~ Hz 0 Hz ± 0. Hz or 0Hz ± 0. Hz 100%~110%:audible warning 110%~10%: UPS shut down in 0 seconds at battery mode or transfer to bypass when the utility is normal ; >10%:UPS shuts down immediately at battery mode or transfer to bypass mode when the utility is normal :1 % THD (Linear Load), % THD (Non-linear Load) Zero 4 ms (Typical) Pure Sinewave Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Sounding every 4 seconds Sounding every second Sounding twice every second Continously sounding 419 x 190 x 18 0. 0. 419 x 190 x 18 1 0-90 % RH @ 0-40 C (non-condensing) Less than 0dBA @ 1 Meter Supports Windows 000/00/XP/Vista/008, Windows 7/8, Linux, Unix, and MAC Power management from SNMP manager and web browser 419 x 190 x 18 8 419 x 190 x 18 1 INPUT Nominal Voltage High Line Transfer Voltage Range High Line Comeback Frequency Range Phase Power Factor OUTPUT Output Voltage Voltage Regulation Frequency Range (Synchronized Range) Frequency Range (Batt. Mode) Current Crest Ratio Harmonic Distortion AC Mode to Batt. Mode Transfer Time Inverter to Bypass Waveform (Batt. Mode) EFFICIENCY AC Mode BATTERY Battery Type Numbers Standard Model Typical Recharge Time Charging Current (max.) Charging Voltage Battery Type and Numbers Long-run Model Charging Current (max.) Charging Voltage INDICATORS LCD Panel ALARM Low Battery Overload Fault PHYSICAL Dimension, D X W X H (mm) Standard Model Net Weight (kgs) Dimension, D X W X H (mm) Long-run Model Net Weight (kgs) ENVIRONMENT Humidity Noise Level MANAGEMENT Smart RS-/USB Optional SNMP Champ 1K 1000 VA / 900 W * Derate to 80% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 100/00/08VAC Champ K 000 VA / 1800 W 09 * Product specifications are subject to change without further notice * Product specifications are subject to change without further notice 10 MODEL CAPACITY 88% 8% 1 V / 9 AH 7.4VDC ± 1% 7.4VDC ± 1% 8 x 14 x 0 9.8 8 x 14 x 0 4.1 Champ K 000 VA / 700 W 00 / 08 / 0 / 0 / 40VAC 10VAC / 140 VAC ± % or 00 VAC / 80 VAC ± %( based on load percentage 0-80% / 80% - 100%) 14VAC / 1 VAC ± % or 90VAC / 70 VAC ± %( based on load percentage 0-80% / 80% - 100%) 40Hz ~ 70 Hz Single phase with ground 0.99 @ Nominal Voltage (100% load) 00/08/0/0/40VAC ± 1% 47~ Hz 0 Hz ± 0.% :1 % THD (Linear Load), % THD (Non-linear Load) Zero 4 ms (Typical) Pure Sinewave 89% 8% 1V / 9 AH 4 4 hours recover to 90% capacity 1.0A 4.7 VDC ±1% Depending on the capacity of external batteries 1A/A/4A/A 4.7 VDC ±1% 90% 88% 1 V / 9 AH 8.1VDC ± 1% 8.1VDC ± 1% Load level, Battery level, AC mode, Battery mode, Bypass mode, and Fault indicators Sounding every 4 seconds Sounding every second Sounding twice every second Continously sounding 97 x 14 x 0 17 97 x 14 x 0.8 0-90 % RH @ 0-40 C (non-condensing) Less than 0dBA @ 1 Meter Supports Windows 000/00/XP/Vista/008/7/8, Linux, Unix, and MAC Power management from SNMP manager and web browser 41 x 190 x 18 7. 97 x 14 x 0 7.4
Line-interactive AVR Function > Stage Boost & Bucks Voltage Line-interactive Model > Power Factor 0. > Better than local brand PF 0.4~0. Cold start > Power Bank function Elegant outlookreliable quality highest C/P (Cost/Performance) value Continuous power supply for preventing data loss Power regulation for protecting connected devices Excellent microprocessor control guarantees highest reliability 1
EP K / Front Panel EP K / Rear Panel USB Communication Port Fan RJ-11 Surge Protector LCD Panel Output Receptacles AC Input Power Button EP Series Backup Time Model Backup time / mins (Internal battery only) % Load 0% Load 7% Load 100% Load Config. EP 40 EP 0 EP 80 EP 1K EP 1.K EP K 1.1 1.9 1.9 14.7 1.1 11.8 8. 9. 8. 11 9... 4.4 7.. 1. (sec.). (sec.) (sec.). 1. (sec.) 4.Ah x 1 7Ah x 1 9Ah x 1 7Ah x 9Ah x 9Ah x 1 14
FP K / Front Panel FP K / Rear Panel Fan Output Receptacles UPS Status LED AC Mode: green lighting : green flashing AC Input Power Switch FP Series Backup Time Model Backup time / mins (Internal battery only) % Load 0% Load 7% Load 100% Load Config. FP 00 FP 800 FP 1K FP 1.K FP K 19 0 0 1 7.. 0 (sec.) 8 (sec.) 1 (sec.) (sec.) 0 (sec.) 1. 1 7Ah x 1 9Ah x 1 7Ah x 9Ah x 9Ah x 1 1
EP 40~K / Product Specification FP 00~K / Product Specification Auto restart while AC is recovering Simulated sine wave Off-mode charging Cold start function Excellent microprocessor control guarantees high reliability Boost and buck AVR for voltage stabilization USB/RS- communication port and RJ-11 protection Compact size Simulated sine wave Off-mode charging Cold start function Excellent microprocessor control guarantees high reliability Boost and buck AVR for voltage stabilization Auto restart while AC is recovering Generator compatible MODEL CAPACITY INPUT EP 40 40 VA / 40 W EP 0 0 VA / 0 W EP 80 80 VA / 480 W EP 1000 1000 VA / 00 W EP 100 100 VA / 900 W EP 000 000 VA / 100 W MODEL CAPACITY INPUT Voltage FP 00 00 VA / 0 W FP 800 800 VA / 480 W FP 1K 1000 VA / 00 W 0/0/40 VAC FP 1.K 100 VA / 900 W FP K 000 VA / 100 W Voltage 0/0/40 VAC Voltage Range 81-14 VAC/140-90 VAC Voltage Range 1-90 VAC Frequency Range 0 Hz Frequency Range 0 Hz OUTPUT OUTPUT Voltage 0/0/40 VAC AC Voltage Regulation (Batt. Mode) ±10% AC Voltage Regulation (Batt. Mode) ±10% Frequency Range (Batt. Mode) 0 Hz ±1 Hz Frequency Range (Batt. Mode) 0 Hz or 0 Hz ±1 Hz Transfer Time Typical - ms Transfer Time Typical - ms Waveform (Batt. Mode) Simulated Sine Wave Waveform (Batt. Mode) Simulated Sinewave BATTERY BATTERY Battery Type & Number Typical Recharge Time 1 V/4. Ah x 1 1 V/7 Ah x 1 1 V/9 Ah x 1 1 V/7 Ah x 4- hours up to 90% capacity 1 V/9 Ah x 1 V/9 Ah x Battery Type & Number Typical Recharge Time 1 V/7 Ah x 1 1 V 9 Ah x 1 1 V/7 Ah x 1 V/9 Ah x 4 hours recover to 90% capacity 4- hours recover to 90% capacity 1 V/9 Ah x INDICATORS INDICATORS AC Mode Green lighting AC Mode Green lighting Green flashing Green flashing ALARM ALARM Sounding every 10 seconds Sounding every 10 seconds Low Battery Sounding every second Low Battery Sounding every second Overload Sounding every 0. second Overload Sounding every 0. second Fault Continuously sounding Fault Continuously sounding PROTECTION PROTECTION Full Protection Overload, discharge, and overcharge protection Full Protection Overload, discharge, and overcharge protection PHYSICAL PHYSICAL Dimension, D X W X H (mm) 87 x 110 x 14 87 x 110 x 14 87 x 110 x 14 0 x 14 x 10 97 x 14 x 0 97 x 14 x 0 Dimension, D X W X H (mm) 79 x 101 x 14 0 x 10 x 18 Net Weight (kgs). 4. 4.9 8 11.1 11. Net Weight (kgs) 4. 4.9 8. 10.4 11 ENVIRONMENT ENVIRONMENT Humidity 0-90 % RH @ 0-40 C (non-condensing) Humidity 0-90 % RH @ 0-40 C (non-condensing) Noise Level Less than 40dB Noise Level Less than 40dB 17 * Product specifications are subject to change without further notice * Product specifications are subject to change without further notice 18
View Power GUI Interface A B C A Function Menu Offer complete tool-set for navigating and setting the GUI. D E B C Shortcut Menu Provide short cuts to more commonly used functions. Current Monitoring Information Display user ID and monitored UPS name. D UPS Navigation Indicate all UPS locations in networked environment. E Main Window Contain information and/or controls that change with each function menu or shortcut menu selected. Viewpower download webstie : http://www.power-software-download.com/viewpower.html Feature Summary: Allows control and monitoring of multiple UPSs via LAN and INTERNET Supports auto and manual online upgrade User-friendly power analysis graph: event statistics, history data chart export Real-time dynamic graphs of UPS data (voltage, frequency, load level, battery level) Safely OS shutdown and protection from data loss during power failure Warning notifications via audible alarm, broadcast, mobile messenger, and e-mail Scheduled UPS on/off, battery test, programmable outlet control, and audible alarm control Password security protection and remote access management Supports multiple languages: English, Chinese, French, German, Spanish, Russian, Portuguese, Ukrainian, Italian, Polish, Czech, Turkish 19
POWER NEVER ENDS All rights reserved. FSP is under trademark registration process. All specifications are subject to change without prior notice. www.fsplifestyle.com www.facebook.com/fsp.global Headquarters FSP TECHNOLOGY INC. No., Jianguo E. Rd., Taoyuan Dist., Taoyuan City 0, Taiwan, R.O.C. Tel: 88--7-9888 Fax: 88--7-9 Email: sales@fsp-group.com.tw 01 / Ver. 1 01 FSP Technology Inc. All Rights Reserved.