ADSS Fiber Optic Cable by Fiberteknology Totally all Dielectric Non- metal Strength member Filler Protect Loose Tube Fiber Excellent anti-electromagnet ability Application All-dielectric Self-supporting Optical Cable ADSS cable is the short form for All-dielectric Self-supporting Optical Cable. ADSS fiber optic cable is loose tube stranded; the tubes are filled with water resistant filling compound for use in Exterior. The tubes are stranded around fiber reinforced plastic are a non-metallic central strength member into a compact and circular cable core. After the ADSS cable core is filled with filling compound, it is covered with a thin PE inner sheath, after two layers of Aramid yarns which are applied in two directions over the inner sheath as strength member, the ADSS optical fiber cable is completed with Double AT outer sheath. The actual status of overhead power lines is taken into full consideration when ADSS fiber optic cable is being designed. Totally auto supported for clear large or equal to 100 meters, 200 meters and 400 meters. For power lines equal to or over 25 KV to 230 KV, AT outer sheath is applied. The delicate design of Aramid quantity and stranding process of the ADSS cable can meet the demand on various spans.
Construction ADSS fiber cables are with the follow characteristics: 1. ADSS cables can be installed without shutting off the power. 2. ADSS optical fiber cable is completed with Double AT outer sheath. 3. ADSS is light weight and small diameter reducing the load caused by ice and wind and the load on towers and back props. 4. The ADSS cable is large span length and the largest span is over 1000 meters. 5. Dynamic Radius curvature equal to 36 centimeters. 6.- Static Radius curvature equal to 20 centimeters. 7.- Totally auto supported for clear large or equal to 100 meters, 200 meters and 400 meters between structures. 8.- Chain of equal installation to 1 %. 9.- Wind speed Load Superior or equal 100 Km / Hr. 10.- For power lines equal to or over 25 KV to 230 KV. 11.- FRP all Dielectric Member. 12.- Reinforced fiber glass rod. 13.- Tension of operation and installation of (4.0 kn) for Fiber Cables for Line Voltage Power for Clear Large 100 meters and 200 meters between structures and Tension of operation of (9.0 kn) for Fiber Cables for Line Voltage Power for Clear Large of 400 meters between structures. 14.- Each tube have 12 fibers with Universal Fiber Colors. 15.-The cable have one Ripcord to facilitate the detachment of internal and external covers. 16.- Loose Tubes with Gel Protection. 17.- The ADSS Fiber Optic Cable made by Fiberteknology meets Recommendation ITU-T G.652D. 18.- High resistance coating
Feature & Benefits -Meets ITU-T G.652D. -Meets CEI 60793-2-10, ISO/IEC 11801, EN 50173, IEC 60794, IEC 61034, IEC 60332, IEC 60754, TIA/EIA-492AAAC and EIA/TIA 568-B. - Meets Universal Fiber colors (TIA/EIA-598) -Geometric properties regulated with CEI 60793-2-10 - Meets G.652 D Subcategory. -Resistant in extreme climates, shock and stress. Section Picture of Optical Cable www.fiberteknology.com
Physical Properties Specifications Fibers: 12 24 36 48 Singlemode μm Strength Members Aramid Yarns Subcables / FO in Subc. 1 + 3/ 12 2 + 2 / 12 3 + 1 / 12 4 / 12 Identification Numbers AT Sheath Color Outer Jacket Double AT outer Sheath Black Tubes With Gel Protection www.fiberteknology.com
Specifications Jacket Diameter for Fiber Cables of 12,24 and 36 Fibers for clear large 100 meters and 200 meters between structures 10 mm Jacket Diameter for Fiber Cables of 48 Fibers for clear large 100 meters and 200 meters between structures 12 mm Jacket Diameter for Fiber Cables of 12,24 and 36 Fibers for clear large 400 meters meters between structures 13 mm Wavelength 1310 to 1625 nm Attenuation (db/km) 1310 nm = 0.35 1550 nm = 0.22 Cladding noncircularity Tension of Operation and installation (N) for Fiber Cables for clear large 100 meters and 200 1.0 % 4.0 kn
Tension of Operation (N) for Fiber Cable for clear large 400 meters between structures Dynamic Radius curvature equal 9.0 kn 36 centimeters Line Voltage Power Fiber Cables for Clear Large 100 and 200 meters between structures 25 KV Line Voltage for Fiber Cables for Clear Large 400 meters between structures 230 KV Maximum weight 100 kg/km * THE USEFUL LIFE FOR THE ADSS FIBER OPTIC CABLE BY FIBERTEKNOLOGY IS AT LEAST 20 YEARS www.fiberteknology.com
Temperature Range - Shipping and Storage: ( - 50 C to + 70 C ) - Operation Temperature: ( - 30 C to + 70 C ) Ordering Information PART NUMBER DESCRIPTION NUMBER OF FIBERS TYPE FO-12SM925100 POWER FOR CLEAR LARGE 100 METERS BETWEEN 12 SINGLEMODE FO-24SM925100 POWER FOR CLEAR LARGE 100 METERS BETWEEN. 24 SINGLEMODE FO-36SM925100 POWER FOR CLEAR LARGE 100 METERS BETWEEN 36 SINGLEMODE FO-48SM925100 POWER FOR CLEAR LARGE 100 METERS BETWEEN 48 SINGLEMODE www.fiberteknology.com
Ordering Information PART NUMBER DESCRIPTION NUMBER OF FIBERS TYPE FO-12SM925200 G.652D,TUBES WITH GEL PROTECTION,LINE VOLTAGE POWER FOR CLEAR LARGE 200 METERS BETWEEN 12 SINGLEMODE FO-24SM925200 G.652D,TUBES WITH GEL PROTECTION,LINE VOLTAGE POWER FOR CLEAR LARGE 200 METERS BETWEEN 24 SINGLEMODE FO-36SM925200 G.652D,TUBES WITH GEL PROTECTION,LINE VOLTAGE POWER FOR CLEAR LARGE 200 METERS BETWEEN 36 SINGLEMODE FO-48SM925200 G.652D,TUBES WITH GEL PROTECTION,LINE VOLTAGE POWER FOR CLEAR LARGE 200 METERS BETWEEN 48 SINGLEMODE
Ordering Information PART NUMBER DESCRIPTION NUMBER OF FIBERS TYPE FO-12SM925400 POWER FOR CLEAR LARGE 400 METERS BETWEEN 12 SINGLEMODE FO-24SM925400 POWER FOR CLEAR LARGE 400 METERS BETWEEN. 24 SINGLEMODE FO-36SM925400 POWER FOR CLEAR LARGE 400 METERS BETWEEN 36 SINGLEMODE FO-48SM925400 POWER FOR CLEAR LARGE 400 METERS BETWEEN 48 SINGLEMODE