LL TRNSFER UNITS multi-directional handling solutions www.ball-units.com
4 3 2 all Transfer Units Index T Range 3 T Range 4 T Range T Range 6 Fabricated all Tables 7 ir argo astors 7 all Transfer Units ridge earings ball units are designed for multi-direction materials handling solutions. They consist of a large load-bearing ball running on a number of smaller support balls housed in a hemispherical cup. Each unit slightly oiled during manufacture. Our ball units are designed to be used in a standard vertical position. T Range Light duty pressed steel ball transfer unit manufactured with standard zinc plated finish. ll ball contact surfaces are case hardened to ensure a long trouble free service. Fitted using a spring clip. It is important that the clip is positioned in the seating hole prior to insertion of the ball unit. T is fitted with a felt seal. d1 T Spring lip Seating Hole Introduction t ridge earings we have been manufacturing ball transfer units and ball tables for over 2 years. These provide a simple yet flexible, cost effective, multi-directional movement for both light and heavy loads. With a wide range of load capacities our ball units render them suitable for numerous materials handling solutions. Prefix Load all Minor alls Housing Standard hrome Steel hrome Steel arbon Steel Units Grade 100 60-64HR Grade 100 60-64HR right Zinc Plated N Plastic Stainless Steel arbon Steel elrin/nylon ISI 420 right Zinc Plated S Stainless Steel Stainless Steel arbon Steel ISI 420 ISI 420 right Zinc Plated SP Stainless Steel Stainless Steel Nylon 6 ISI 420 ISI 420 30% Glass Filled SS Stainless Steel Stainless Steel Stainless Steel ISI 420 ISI 420 ISI 304 Materials ridge earings ball transfer units are available in various materials. Material required should be stated when ordering. Reference Material & Finish all ia. Maximum mm mm mm mm mm Load Kg. T 1 hrome Steel alls, 1.8 31 21 9. 24 60 T 1 N elrin Load all, 1.8 31 21 9. 24 10 T 22 hrome Steel alls, 22.2 4.2 27. 8.2 3.81 160 T 22 S 22.2 4.2 27. 8.2 3.81 160 T 22 N elrin Load all, 22.2 4.2 27. 8.2 3.81 20 T Spring lip Reference d1 Seating Hole Plate imension Thickness T 1 S 6.0 30.8 2 2-3mm T 22 S 7.0 4 37 3-4mm
4 all Transfer Units T Range Holes on flange for fixings by means of screws or rivets. Stainless steel units are used predominantly in air cargo and baggage handling/ground support equipment. T 32 units have multiple drainage holes. ll units available with 2 or 3 hole fixings. T Range T 30 S manufactured with high capacity, N machined mild steel body. Multi drainage hole. Supplied without integrated felt seal. Suitable for air cargo and baggage handling/ground support equipment. T 30 SP manufactured with hi-impact plastic body for reduced component weight. T 32 SS T 30 S F - Fixing Holes - Seating Hole E Reference Material & Finish all ia. E (P) F (ia.) Maximum mm mm mm mm mm mm mm Load Kg. T 2 2.4 73. 30. 14.2 40.6 60 hrome Steel alls, T 32 31.7 73.7 36.7 16.3 47 8.7 12 Nylon Load all, T 2 N 2.4 73. 30. 14.2 40.6 2 Reference Material & Finish all ia. Maximum mm mm mm mm mm Load Kg. T 30 S 30 37 13.8 4 30 right Zinc Plated ody T 30 SP* 30 36. 13.8 4 200 High Impact Plastic ody *T 30 SP fitted with integral stainless steel earing up. T 32 S 31.7 73.7 36.7 16.3 47 8.7 12 T 2 SS 2.4 73. 30. 14.2 40.6 60 Stainless Steel alls & Pressings T 32 SS* 31.7 73.7 36.7 16.3 47 8.7 12 *T Stainless Steel units supplied without integral felt seal.
46 all Transfer Units 7 T Range Light duty pressed steel ball transfer unit manufactured with standard zinc plated finish. all contact surface is case hardened to ensure a long trouble-free service. Unit complete with 2 hole fixing. irt exit holes included as standard. T is fitted with a felt seal. Fabricated all Tables all transfer tables manufactured to suit your requirements. all tables can be supplied fitted with T, T or T units. Standard finish: Powder coat lue RL 00 or White RL 9010 Other colours available. Stainless Steel ball tables also available. F - Fixing Holes G E Square Pitch iamond Pitch Elongated Pitch Reference Material & Finish all ia. E F (ia.) G Maximum mm mm mm mm mm mm mm mm Load Kg. hrome Steel alls, T 2 2.4 41.8 30.2 8.00 68.0.6. 0.90 ir argo astors T 2 S 2.4 41.8 30.2 8.00 68.0.6. 0.90 ridge earings are pleased to offer a range of ir argo astors. Please contact us for further information. NEE SSISTNE? We offer FREE technical advice. If you cannot find the product you are looking for, let us help you. 01384 264930
RIGE ERINGS LYE, STOURRIGE SITE 1 SSEMLY & ESPTH EPT. 2 2 1 3 OMPONENTS & FINISHE PROUT STORES MHINING EPT. 3 4 4 PRESS EPT. ROLLER MNUFTURE ridge earings Ltd. romley Street, Lye, Stourbridge, W. Midlands. Y9 8PT Tel: 00 44 (0)1384 264 930 Email: bearingsales@bridge-bearings.co.uk www.bridge-bearings.co.uk www.ball-units.com ll images and drawings are the sole property of ridge earings Limited and cannot be duplicated. 0716.01