VULCAN S STRONG SOLUTIONS Revised 2-12-2003 VULCAN S STRONG SOLUTIONS 1
EXECUTIVE COMMENTARY The following and are included for your evaluation. The items highlighted in yellow in the Table of Contents and the applicable pages are the specific applications used in our proposal. All of the products furnished by Vulcan Steel Structures, Inc. are included in these and. For a more complete description of all of the Vulcan s products, please see their Standard Specifications. Unless instructed otherwise, we have used the most cost effective application. After evaluating the and of our other products, it is possible that you may desire an alternate for another product. Please feel free to request these enhancements for your consideration. By Title Company VULCAN S STRONG SOLUTIONS 2
TABLE OF CONTENTS VULCAN S STRONG SOLUTIONS...5 WELDING...7 VULCAN S CS CLEAR SPAN SYSTEM...9 VULCAN S MS MULTISPAN SYSTEM...13 VULCAN S CL CLASSIC STRAIGHT COLUMN AND RAFTER SYSTEM...17 VULCAN S HS HIGH SPAN SYSTEM...21 VULCAN S SST SINGLE SLOPE TAPERED COLUMN AND RAFTER SYSTEM...25 VULCAN S SSS CLEAR SPAN SINGLE SLOPE STRAIGHT COLUMN & RAFTER SYSTEM...29 VULCAN S LT LEAN TO SYSTEM...33 VULCAN S ENDWALL STRUCTURAL SYSTEMS...37 VULCAN S CONTINUOUS SPAN GIRTS...39 VULCAN S SIMPLE SPAN GIRTS...41 VULCAN S PURLINS...43 VULCAN S LONG BAY SYSTEM...45 VULCAN S OVERHANG...49 VULCAN S FASCIA SYSTEM...51 VULCAN S ROD OR CABLE BRACING...53 VULCAN S FRAMED TRUCK DOOR OPENING...55 VULCAN S RIB PANELS...57 VULCAN S R WALL PANELS...62 VULCAN S REVERSE R WALL PANELS...66 VULCAN S R ROOF PANELS...70 VULCAN S ARCHITECTURAL A PANEL...74 VULCAN S SHADOWRIB PANEL...78 VULCAN S SOFFIT PANELS...81 VULCAN S PBR PANELS...83 VULCAN S ULTRA-DEK STANDING SEAM ROOF SYSTEM...88 VULCAN S DOUBLE-LOK STANDING SEAM ROOF SYSTEM...93 VULCAN S BATTENLOK STANDING SEAM ROOF SYSTEM...99 VULCAN S LOKSEAM STANDING SEAM ROOF SYSTEM...105 VULCAN S VSHR-2 PANEL SYSTEM...110 VULCAN S VS200-2 ARCHITECTURAL PANEL SYSTEMS...115 VULCAN S VS300-2 ARCHITECTURAL PANEL SYSTEMS...120 VULCAN S LINER PANEL...125 VULCAN S ARTISAN L12 SOFFIT AND LINER PANEL...127 VULCAN S U WALL AND LINER PANEL...129 VULCAN S REVERSE U WALL AND LINER PANEL...133 VULCAN S ARCHITECTURAL NUWALL PANEL...137 VULCAN S STORMPROOF PANEL...142 VULCAN S RetroR (RETRO-FIT) PANELS...145 VULCAN S FASTENERS...149 VULCAN S HANGAR DOORS...150 VULCAN S SLIDE DOORS...151 VULCAN S STRONG SOLUTIONS 3
TABLE OF CONTENTS VULCAN S WINDOWS...152 VULCAN S ROOF SKYLIGHT PANEL...153 VULCAN S SSR SERVICE WAY...154 VULCAN S SEALANT...155 VULCAN S LOUVERS...156 VULCAN S VENTS...157 VULCAN S GABLE TRIM, EAVE TRIM, AND FLASHING...158 VULCAN S HOLLOW METAL DOORS...159 VULCAN S PIPE FLASHING...161 VULCAN S GUTTER...162 VULCAN S STRONG SOLUTIONS 4
VULCAN S STRONG SOLUTIONS This is a short evaluation of some of Vulcan s Strong Solutions. For more information, see a particular product evaluation. 1. Vulcan s Strong Solutions are the high standards and new performance goals set by Vulcan in its everyday dealings. 2. Vulcan offers the best coatings in the industry: Vulcan Signature 300, a Kynar 500/Hylar 5000 finish, and Signature 200, a Siliconized Polyester finish, as a standard. 3. Vulcan Signature 300, a Kynar 500/Hylar 5000 finish, and Signature 200, a Siliconized Polyester finish, is unmatched in the industry and provides a superior finish 4. The Vulcan Lap Rib panel offers a deep corrugation of a full 1-1/4. 5. Vulcan offers the industries only 10-year manufacturer s weathertightness warranty. 6. The Vulcan Lap Rib system utilizes up to 1,500 fewer fasteners for an 80 x 100 area. 1. The Owner can be assured of the best possible building system as shown by the dependable and innovative standards set by Vulcan in the past and in the years to come. 2. The owner should be aware that Vulcan uses the best in the industry as a standard practice in their building system. 3. Vulcan Signature 300, a Kynar 500/Hylar 5000 finish, and Signature 200, a Siliconized Polyester finish, is unlike silicone polyester or diluted Kynar systems which fade, chalk, or look aged after a span of a few years in comparison. 4. The depth of the panel s corrugation is a critical factor in the system s strength against wind uplift and traffic. 5. Vulcan s top quality material and engineering makes this warranty possible, assuring the owner of the confidence Vulcan has for its product. 6. Fewer fasteners mean fewer holes through the roof, lessening the chance for a weathertightness failure. VULCAN S STRONG SOLUTIONS 5
VULCAN S STRONG SOLUTIONS 7. All Vulcan roof and wall accessories may be warranted by Vulcan and are designed to match the panel configuration. 8. The Vulcan roof system options include the standing seam roof (SSR). Vulcan s standing seam roof systems include Vulcan's Ultra-Dek, Vulcan Double- Lok, Battenlok, and Lokseam. 9. The standing seam roof systems are fastened to the structural by patented clips that allow roof movement with temperature changes. 10. All end-laps and splices are located on the roof structural system. 11. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 12 Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials, reduces the initial cost, and improves the value of the building. 13 Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 7. The warranty, when provided by Vulcan, provides assurance of the weathertightness and compatibility of the roof and wall system. 8. The standing seam roofs offered by Vulcan are the best in the industry, providing the owner with a roof system with a long, durable life. 9. The clips, allowing the roof to move, provide the system the movement necessary to ensure weathertightness throughout its life. 10. Locating the splices and end-laps on the roof structural creates a stronger system capable of withstanding traffic and uplift better. 11. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. 12 Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. 13 The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 6
WELDING 1. All shop welds are in accordance with the American Welding Society Code for Building Construction 2. The welders employed by Vulcan are certified welders. 3. Vulcan uses submerged arc welding machines for welds. 4. Structural components and shop welds are quality inspected by certified welders prior to loading and shipping to the job site. 5. All base plates, splice plates, stiffeners, and clips are factory welded in place on structural members. 6. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 1. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 2. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 3. The owner is assured of a better weld, resulting in a safe and reliable structure, which reduces initial costs and improves value. 4. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 5. Shop welding of component parts eliminates the need for field welding, which assures structural integrity and reduces erection time and cost. 6. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 7
WELDING 7. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 8. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 7. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. 8. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 8
VULCAN S CS CLEAR SPAN SYSTEM Vulcan s CS Clear Span rigid frames are generally the ideal system when interior columns are not desirable. Vulcan s rigid frames allow optimum flexibility in interior space utilization. CS CLEAR-SPAN FRAME (Straight Columns and Rafters) 1. The CS Clear Span system is a low rigid frame. 2. The CS system offers a double-sloped frame option. 3. The CS system includes the tapered column and rafter option for frames. 4. The CS system is available in widths from 20 to 150 in 1 increments. 5. The CS system is available with eave heights from 10 to 25 in ¼ increments. 6. The CS system is available with roof slopes of ¼:12 to 1:12. 7. Bay spacing can be spaced from 16 to 30 in 6 increments. 8. The CS system is a clear span tapered frame column and rafter. 1. The CS system frame provides a span up to 150 without interior columns, allowing for an unobstructed space. 2. A double-sloped roof offers the aesthetics of conventional framing with the confidence of a metal building systems. 3. Tapered columns and rafters provide for the least amount of steel necessary for beam load support, providing you with the most economical solution. 4. The CS system offers the owner a wide range of widths for their building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The slopes offer the owner choices for the appearance desired. 7. Different bay spacing provides variable bay widths to accommodate different needs of machinery placement and access openings. 8. The CS Clean Span tapered frame column and rafter system provides the owner with an unlimited design for the interior to accommodate machinery or storage. VULCAN S STRONG SOLUTIONS 9
VULCAN S CS CLEAR SPAN SYSTEM 9. The CS system frame offers an offcenter ridge, as an option. 10. All frame parts have factory-punched holes for bolted connections. 11. All parts are factory marked with identification numbers. 12. All structural steel has factory applied red oxide prime paint. 13. All shop welds are in accordance with the American Welding Society Code for Building Construction. 14. Structural components and shop welds are made by certified welders and are quality inspected prior to loading and shipping to the job site. 15. All structural-to-structural components are bolted connections. 16. All purlin and girt clips are welded to the frame. 17. All purlin and girt clips provide bolted connections through the webs of the purlins and girts. 9. An off-center ridge provides unusual clearances when machinery or requirements dictate the need. 10. Factory punched holes provide an accurate, easy installation, lowering costs and saving you money. 11. Marked part numbers provide easy, error free installation. 12. Factory applied red oxide prime paint temporarily protects the steel, and can act as a finish or be easily finish painted. 13. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 14. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 15. Building erection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. 16. This provides for easier, stronger connections, which saves money in erection. 17. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. Bolting through the web provides for the strongest connection of purlins and girts. VULCAN S STRONG SOLUTIONS 10
VULCAN S CS CLEAR SPAN SYSTEM 18. All purlin and girt clips provide bolted connections through the webs of the girts and purlins. 19. The CS Clear Span system combines the conventional flat-roof look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 20. Metal buildings withstand earthquakes and multiple hurricanes better than other types of construction. 21. The welders employed by Vulcan are certified welders. 22. Most welds are made using a submerged arc-welding machine. 23. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 24. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 18. Bolting through the web provides for the strongest connection of purlins and girts. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. 19. The low roof profile is architecturally pleasing while providing good drainage and the most reliable structure. 20. Through the last three decades, A.I.S.I. has determined that pre-engineered buildings have withstood eleven major earthquakes and multiple hurricanes better that any other type of construction. 21. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 22. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants 23. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. 24. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 11
VULCAN S CS CLEAR SPAN SYSTEM 25. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 25. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 12
VULCAN S MS MULTISPAN SYSTEM Modular framing optimizes steel due to the loads being dispersed between more columns. All modular frames offer non-symmetrical interior column spacing at no extra charge, allowing freedom of design to meet machinery layout requirements. M-Multi S-Span 1. The MS system is a modular frame. 1. The MS system rigid frame provides a span up to 300 with interior columns, allowing for greater widths and an economical system. 2. The MS system offers a double-sloped frame option. 3. The MS system includes tapered column and rafter frames. 4. The MS system is available in widths over 80 in 6" increments. 5. The MS system is available with eave heights from 10 to 30 in 1/8" increments. 6. The MS is available with roof slopes ranging for ¼:12 to 2:12. 7. Bay spacing can be staggered from 16 to 56 in 6 increments. 2. A double-sloped roof offers the aesthetics of conventional framing with the confidence of a metal building system, while saving you money. 3. Tapered columns and rafters provide for the least amount of steel necessary for beam load support, saving you money. 4. The MS system offers the owner a wide range of widths for the building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The variable slopes available offer the owner choices for the appearance desired to the nearest.001 of an inch. 7. Staggered bay spacing provides variable widths to accommodate different needs of machinery placement and access openings. 8. The MS system is a modular post frame. 8. The modular aspect of the MS system provides the owner with a wide range of sizes in building design. VULCAN S STRONG SOLUTIONS 13
VULCAN S MS MULTISPAN SYSTEM 9. The MS system frame offers an offcenter ridge. 10. The MS system offers module spacing of 40 to 56 in 6" increments. 11. All frame parts have factory-punched holes for bolted connections. 12. All parts are factory marked with identification numbers. 13. All structural steel has factory applied red oxide prime paint. 14. All Shop welds are in accordance with the American Welding Society Code of Building Construction. 15. Structural components and shop welds are quality inspected by a certified welder prior to loading and shipping to the job site. 16. All base plates, splice plates, and stiffeners are factory welded in place on structural members. 17. All purlin and girt clips are welded to the frame. 9. An off-center ridge provides unusual clearances when machinery or requirements dictate the need. 10. Different spacing allows the owner freedom to design the modular posts around machinery and other design requirements. 11. Factory punched holes provide an accurate, easy installation, lowering costs and saving you money. 12. Marked part numbers provide easy, error free installation. 13. Factory applied red oxide prime paint temporarily protects the steel, and can act as a finish or be easily finish painted. 14. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 15. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 16. Shop welding of component parts eliminates the need for field welding, which assures structural integrity and reduces erection time and cost. 17. This provides for easier connections, which saves money in erection. VULCAN S STRONG SOLUTIONS 14
VULCAN S MS MULTISPAN SYSTEM 18. All purlin and girt clips provide bolted connections through the webs of the purlins and girts. 19. All structural-to-structural components are bolted connections. 20. The MS system combines the conventional flat-roof look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 21. Metal buildings withstand earthquakes and multiple hurricanes better than other types of construction. 22. The welders employed by Vulcan are certified welders. 23. Most welds are made using submerged arc welding machines. 24. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 18. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. Bolting through the web provides for the strongest connection of purlins and girts. 19. Building erection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. 20. The low roof profile is architecturally pleasing while providing good drainage and the most reliable structure. 21. Through the last three decades, A.I.S.I. has determined that pre-engineered buildings have withstood eleven major earthquakes and multiple hurricanes better than any other type of construction. 22. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 23. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 24. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 15
VULCAN S MS MULTISPAN SYSTEM 25. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 26. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems, modular framing systems, and Long Bay are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 25. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. 26. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 16
VULCAN S CL CLASSIC STRAIGHT COLUMN AND RAFTER SYSTEM CL CLASSIC SYSTEM (A standard off-the-shelf system.) 1. The CL Classic system is a low rigid frame. 2. The CL Classic system is a doublesloped roof frame system. 3. The CL Classic system includes the straight column and rafter option for frames. 4. The CL Classic system is available in widths from 30 to 80 in 6 increments. 5. The CL Classic system is available with eave heights from 10 to 30 in 1/8 increments. 6. The CL Classic system is available with roof slopes ranging from ¼:12 to 4:12. 7. Bay spacing can be staggered from 16 to 30 in 6 increments. 1. The CL Classic system rigid frame provides a span without interior columns, allowing for unobstructed space. 2. A double-sloped roof offers the aesthetics of conventional framing with the confidence of a metal building system. 3. Straight columns and rafters provide more space within the frame to accommodate the design needs of the owner. 4. The CL Classic system offers the owner a wide range of widths for the building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The variable slopes available offer the owner choices for the appearance desired to the nearest.001 of an inch. 7. Staggered bay spacing provides variable widths to accommodate different needs of machinery placement and access openings. VULCAN S STRONG SOLUTIONS 17
VULCAN S CL CLASSIC STRAIGHT COLUMN AND RAFTER SYSTEM 8. The CL Classic system is a clear span frame. 9. The CL Classic system frame offers an off-center ridge, as an option. 10. All frame parts have factory-punched holes for bolted connections. 11. All parts are factory marked with identification numbers. 12. All structural steel has factory applied red oxide prime paint. 13. All shop welds are in accordance with the American Welding Society Code of Building Construction. 14. Structural components and shop welds are quality inspected prior to loading and shipping to the job site. 15. All base plates, splice plates, clips, and stiffeners are factory welded in place on structural members. 16. All structural-to-structural components are bolted connections. 8. The clear span aspect of the CL Classic system provides the owner an unlimited design of the interior to accommodate machinery or storage. 9. An off-center ridge provides unusual clearances when machinery or requirements dictate the need. 10. Factory punched holes provide an accurate, easy installation lowering costs and saving you money. 11. Marked part numbers provide easy, error free installation. 12. Factory applied red oxide prime paint temporarily protects the steel, and can act as a finish or be easily finish painted. 13. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 14. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 15. Shop welding of component parts eliminates the need for field welding, which assures structural integrity and reduces erection time and cost. 16. Building erection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. VULCAN S STRONG SOLUTIONS 18
VULCAN S CL CLASSIC STRAIGHT COLUMN AND RAFTER SYSTEM 17. All purlin and girt clips are welded to the frame. 18. All purlin and girt clips provide bolted connections through the webs of the girts and purlins. 19. The CL Classic system combines the conventional flat-roof look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 20. Metal buildings withstand earthquakes and multiple hurricanes better than other types of construction. 21. The welders employed by Vulcan are certified welders. 22. Most welds are made using a submerged arc welding machines. 23. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 24. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 17. This provides for easier connections, which saves money in erection. 18. Bolting through the web provides for the strongest connection of purlins and girts. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. 19. The low roof profile is architecturally pleasing while providing good drainage and the most reliable structure. 20. Through the last three decades, A.I.S.I. has determined that pre-engineered buildings have withstood eleven major earthquakes and multiple hurricanes better than any other type of construction. 21. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 22. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 23. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. 24. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 19
VULCAN S CL CLASSIC STRAIGHT COLUMN AND RAFTER SYSTEM 25. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 25. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 20
VULCAN S HS HIGH SPAN SYSTEM Vulcan s HS High Span rigid frames are generally the ideal system when interior columns are not desirable. Vulcan s HS High Span rigid frames allow optimum flexibility in interior space utilization. HS HIGH-SPAN FRAME 1. The HS High Span system is a high rigid frame. 2. The HS system offers a double-sloped frame option. 3. The HS system includes the tapered column and rafter option for frames. 4. The HS system is available in widths from 20 to 150 in 1 increments. 5. The HS system is available with eave heights from 10 to 25 in ¼ increments. 6. The HS system is available with roof slopes ranging from ¼:12 to 4:12. 7. Bay spacing can be spaced from 16 to 30 in 6 increments. 1. The HS system frame provides a span up to 150 without interior columns, allowing for an unobstructed space. 2. A double-sloped roof offers the aesthetics of conventional framing with the confidence of a metal building systems. 3. Tapered columns and rafters provide for the least amount of steel necessary for beam load support, providing you with the most economical solution. 4. The HS system offers the owner a wide range of widths for their building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The variable slopes available offer the owner choices for the appearance and clearance desired to the nearest.001 of an inch. 7. Different bay spacing provides variable bay widths to accommodate different needs of machinery placement and access openings. VULCAN S STRONG SOLUTIONS 21
VULCAN S HS HIGH SPAN SYSTEM 8. The HS system is a clear span tapered frame column and rafter. 9. The HS High Span system is a clear span frame. 10. The system frame offers an off-center ridge, as an option. 11. All frame parts have factory-punched holes for bolted connections. 12. All parts are factory marked with identification numbers. 13. All structural steel has factory applied red oxide prime paint. 14. All shop welds are in accordance with the American Welding Society Code for Building Construction. 15. Structural components and shop welds are quality inspected prior to loading and shipping to the job site. 16. All structural-to-structural components are bolted connections. 8. The HS High Span tapered frame column and rafter system provides the owner with an unlimited design for the interior to accommodate machinery or storage. 9. The clear span aspect of the HS High Span system provides the owner an unlimited design of the interior to accommodate machinery or storage. 10. An off-center ridge provides unusual clearances when machinery or requirements dictate the need. 11. Factory punched holes provide an accurate, easy installation, lowering costs and saving you money. 12. Marked part numbers provide easy, error free installation. 13. Factory applied red oxide prime paint temporarily protects the steel, and can act as a finish or be easily finish painted. 14. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 15. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 16. Building erection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. VULCAN S STRONG SOLUTIONS 22
VULCAN S HS HIGH SPAN SYSTEM 17. All purlin and girt clips are welded to the frame. 18. All purlin and girt clips provide bolted connections through the webs of the purlins and girts. 19. All purlin and girt clips provide bolted connections through the webs of the girt and purlins. 20. The HS High Span system combines the conventional look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 21. Metal buildings withstand earthquakes and multiple hurricanes better than other types of construction. 22. The welders employed by Vulcan are certified welders. 23. Most welds are made using a submerged arc-welding machine. 24. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 17. This provides for easier, stronger connections, which saves money in erection. 18. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. Bolting through the web provides for the strongest connection of purlins and girts. 19. Bolting through the web provides for the strongest connection of purlins and girts. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. 20. The high roof profile is architecturally pleasing while providing good drainage and the most reliable structure. 21. Through the last three decades, A.I.S.I. has determined that pre-engineered buildings have withstood eleven major earthquakes and multiple hurricanes better that any other type of construction. 22. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 23. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants 24. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 23
VULCAN S HS HIGH SPAN SYSTEM 25. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 26. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 25. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. 26. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 24
VULCAN S SST SINGLE SLOPE TAPERED COLUMN AND RAFTER SYSTEM S-Single S-Slope T-Tapered 1. The SST system includes a low rigid frame. 2. The SST system offers a single sloped frame option. 3. The SST system includes the tapered column and rafter option for frames. 4. The SST system is available in widths from 30 to 80 in 6 increments. 5. The SST system is available with eave heights from 10 to 30 in 1/8 increments. 6. The SST is available with roof slopes ranging from ¼:12 to 1:12. 7. Bay spacing can be staggered from 16 to 30 in 6 increments. 8. The SST system combines the conventional flat-roof look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 1. The SST rigid frame system provides a span up to 80 without interior columns, allowing for unobstructed space. 2. A single sloped roof allows the owner to provide the clearance necessary for equipment without wasting steel. 3. Tapered column and rafter system provides the maximum space within the frame to accommodate the design needs of the owner. 4. The SST system offers the owner a wide range of widths for the building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The variable slopes available offer the owner choices for the appearance desired to the nearest.001 of an inch. 7. Staggered bay spacing provides variable widths to accommodate different needs of machinery placement and access openings. 8. The low roof profile is architecturally pleasing while providing good drainage and the most reliable structure. VULCAN S STRONG SOLUTIONS 25
VULCAN S SST SINGLE SLOPE TAPERED COLUMN AND RAFTER SYSTEM 9. Metal buildings withstand earthquakes and multiple hurricanes better than other types of construction. 9. Through the last three decades, A.I.S.I. has determined that pre-engineered buildings have withstood eleven major earthquakes and multiple hurricanes better than any other type of construction. 10. The SST system is a clear span frame. 10. The clear span aspect of the SST system provides the owner an unlimited design of the interior to accommodate machinery or storage. 11. All frame parts have factory-punched holes for bolted connections. 12. All parts are factory marked with identification numbers. 13. All structural steel has factory applied red oxide prime paint. 14. All shop welds are in accordance with the American Welding Society Code for Building Construction. 15. Structural components and shop welds are quality inspected by a certified welder prior to loading and shipping to the job site. 16 All base plates, splice plates, and stiffeners are factory welded in place on structural members. 11. Factory punched holes provide an accurate, easy installation, lowering costs and saving you money. 12. Marked part numbers provide easy, error free installation. 13. Factory applied red oxide prime paint protects the steel, and can act as a finish or be easily finish painted. 14. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 15. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 16. Shop welding of component parts eliminate the need for field welding, which assures structural integrity and reduces erection time and cost. VULCAN S STRONG SOLUTIONS 26
VULCAN S SST SINGLE SLOPE TAPERED COLUMN AND RAFTER SYSTEM 17. All structural-to-structural components are bolted connections. 18. All purlin and girt clips are welded to the frame. 19. All purlin and girt clips provide bolted connections through the webs of the purlins and girts. 20. The SST system combines the conventional flat-roof look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 21. The welders employed by Vulcan are certified welders. 22. Most welds are made using submerged arc welding machines. 23. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 17. Building ejection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. 18. This provides for easier connections, which saves money in erection. 19. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. Bolting through the web provides for the strongest connection of purlins and girts. 20. The low roof profile is architecturally pleasing while providing good drainage and the most reliable structure. 21. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 22. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 23. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 27
VULCAN S SST SINGLE SLOPE TAPERED COLUMN AND RAFTER SYSTEM 24. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 25. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 24. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. 25. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 28
VULCAN S SSS CLEAR SPAN SINGLE SLOPE STRAIGHT COLUMN & RAFTER SYSTEM S-Span S-Single S-Slope 1. The SSS Clear Span Single Slope system includes a low rigid frame. 2. The SSS system offers a single sloped frame option. 3. The SSS system includes the straight column and rafter option for frames. 4. The SSS system is available in widths from 30 to 80 in 6 increments. 5. The SSS system is available with eave heights from 10 to 30 in 1/8 increments. 6. The SSS system is available with roof slopes ranging from ¼:12 to 1:12. 7. Bay spacing can be staggered from 16 to 30 in 6 increments. 8. The SSS system combines the conventional flat-roof look and architectural treatments you may need for your new building, with the inherent advantages of systems construction. 1. The SSS Clear Span Single Slope system rigid frame provides a span up to 80 without interior columns, allowing for unobstructed space. 2. A single sloped roof allows the owner to provide the clearance necessary for equipment without wasting steel. 3. Straight columns and rafters provide the maximum space within the frame to accommodate the design needs of the owner. 4. The SSS system offers the owner a wide range of widths for the building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The variable slopes available offer the owner choices for the appearance desired to the nearest.001 of an inch. 7. Staggered bay spacing provides variable widths to accommodate different needs of machinery placement and access openings. 8. The low roof profile is architecturally pleasing while providing good drainage and the most reliable structure. VULCAN S STRONG SOLUTIONS 29
VULCAN S SSS CLEAR SPAN SINGLE SLOPE STRAIGHT COLUMN & RAFTER SYSTEM 9. Metal buildings withstand earthquakes and multiple hurricanes better than other types of construction. 9. Through the last three decades, A.I.S.I. has determined that pre-engineered buildings have withstood eleven major earthquakes and multiple hurricanes better than any other type of construction. 10. The SSS system is a clear span frame. 10. The clear span aspect of the SSS system provides the owner an unlimited design of the interior to accommodate machinery or storage. 11. All frame parts have factory-punched holes for bolted connections. 12. All parts are factory marked with identification numbers. 13. All structural steel has factory applied red oxide prime paint. 14. All shop welds are in accordance with the American Welding Society Code for Building Construction. 15. Structural components and shop welds are quality inspected prior to loading and shipping to the job site. 16. All base plates, splice plates, purlins, girt clips, and stiffeners are factory welded in place on structural members. 11. Factory punched holes provide an accurate, easy installation, lowering costs, and saving you money. 12. Marked part numbers provide easy, error free installation. 13. Factory applied red oxide prime paint protects the steel, and can act as a finish or be easily finish painted. 14. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 15. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 16. Shop welding of component parts eliminates the need for field welding, which assures structural integrity and reduces erection time and cost. VULCAN S STRONG SOLUTIONS 30
VULCAN S SSS CLEAR SPAN SINGLE SLOPE STRAIGHT COLUMN & RAFTER SYSTEM 17. All structural-to-structural components are bolted connections. 18. All purlin and girt clips are welded to the frame. 19. All purlin and girt clips provide bolted connections through the webs of the girts and purlins. 20. The welders employed by Vulcan are certified welders. 21. Most welds are made using submerged arc welding machines. 22. We have utilized a Vulcan pre-engineered metal building whose structural design incorporates the highest deflection factor, is the most rigid building, and the easiest to assemble in the industry. 23. Vulcan offers a computer designed, proven, economical alternative to traditional construction. This optimized utilization of raw materials reduces the initial cost and improves the value of the building. 17. Building erection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. 18. This provides for easier connections, which saves money in erection. 19. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. Bolting through the web provides for the strongest connection of purlins and girts. 20. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 21. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 22. By purchasing the most rigid building, the owner saves during erection as it is easier to erect. This savings is passed on to the owner. 23. Computer designed and optimization of raw materials lowers the cost, and the savings is passed on to the owner. VULCAN S STRONG SOLUTIONS 31
VULCAN S SSS CLEAR SPAN SINGLE SLOPE STRAIGHT COLUMN & RAFTER SYSTEM 24. Vulcan s system combines the proven practicality of rigid frame construction with unlimited size flexibility. Clear span framing systems and modular framing systems are computer designed, as well as the panels that are used. The computer utilizes a system that allows total flexibility in determining the building solution that meets your economic and appearance requirements. 24. The owner receives the savings and benefits of Vulcan s system of total flexibility in the building solution. VULCAN S STRONG SOLUTIONS 32
VULCAN S LT LEAN TO SYSTEM Vulcan s LT Lean To rigid frames are generally the ideal system when interior columns are not desirable. Vulcan s LT Lean To rigid frames allow optimum flexibility in interior space utilization. LT LEAN TO FRAME 1. The LT Lean To system is a low rigid frame. 2. The LT system offers a single-sloped frame option. 3. The LT system includes the straight column and tapered rafter option for frames. 4. The LT system is available in widths from 20 to 150 in 1 increments. 5. The LT system is available with eave heights from 10 to 25 in ¼ increments. 6. The LT system is available with roof slopes of ¼:12 to 1:12. 7. Bay spacing can be spaced from 16 to 30 in 6 increments. 1. The LT system frame provides a span up to 150 without interior columns, allowing for an unobstructed space. 2. A single-sloped roof offers the aesthetics of conventional framing with the confidence of a metal building systems. 3. Straight columns and tapered rafters provide for the least amount of steel necessary for beam load support, providing you with the most economical solution. 4. The LT system offers the owner a wide range of widths for their building design. 5. This versatility in height provides many choices and sizes in design for the owner. 6. The slopes available offer the owner a choice for the appearance desired. 7. Different bay spacing provides variable bay widths to accommodate different needs of machinery placement and access openings. VULCAN S STRONG SOLUTIONS 33
VULCAN S LT LEAN TO SYSTEM 8. The LT system is a clear span straight frame column and tapered rafter. 9. All frame parts have factory-punched holes for bolted connections. 10. All parts are factory marked with identification numbers. 11. All structural steel has factory applied red oxide prime paint. 12. All shop welds are in accordance with the American Welding Society Code for Building Construction. 13. Structural components and shop welds are quality inspected by certified welders prior to loading and shipping to the job site. 14. All structural-to-structural components are bolted connections. 15. All purlin and girt clips are welded to the frame. 16. All purlin and girt clips provide bolted connections through the webs of the purlins and girts. 8. The CS Clean Span straight frame column and tapered rafter system provides the owner with an unlimited design for the interior to accommodate machinery or storage. 9. Factory punched holes provide an accurate, easy installation, lowering costs and saving you money. 10. Marked part numbers provide easy, error free installation. 11. Factory applied red oxide prime paint temporarily protects the steel, and can act as a finish or be easily finish painted. 12. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 13. The owner is assured that his structure is fabricated to the most exacting and stringent standards, resulting in a structure safe and reliable for the contents and inhabitants. 14. Building erection requires no field welding of structural components, which assures the owner of dependable erection, structural integrity, and lower erection time and cost. 15. This provides for easier, stronger connections, which saves money in erection. 16. Bolting of purlins or girts through the bottom flange allows for easier pullout during uplift. Bolting through the web provides for the strongest connection of purlins and girts. VULCAN S STRONG SOLUTIONS 34