CanProx One Dual Technology RF Transmitter & Wireless Receiver INSTALLATION INSTRUCTIONS March 2008
Table of Contents Introduction... 3 The Canprox One Dual Technology RF Transmitter... 3 The Canprox One Wireless Receiver... 3 Specifications... 4 Canprox One Dual Technology RF Transmitter... 4 Canprox One Wireless Receiver... 4 Transmitter/Receiver Layout... 5 Canprox One Dual Technology RF Transmitter... 5 Canprox One Wireless Receiver... 5 Receiver Wiring with Smartlock Pro Controller... 6 Typical Configuration... 7 Canprox One Dual Technology RF Transmitter / Wireless Receiver... 7 Cansec Systems Ltd., 2007 All rights reserved. CanProx One Dual Technology RF Transmitter Page 2 of 7
Introduction THE CANPROX ONE DUAL TECHNOLOGY RF TRANSMITTER The CanProx One Dual Technology RF Transmitter is ideal for long-range access control applications such as opening parking gates and raising and lowering vehicle barriers. The transmitter may also be used as a proximity credential for Cansec s CanProx One Proximity Reader*. It takes advantage of a secure digital anti-playback routine based on a custom rolling code variant of the Tiny Encryption Algorithm, providing perhaps the most secure method of controlling access from a long distance. This fast and efficient cipher results in both best-in-class read range and security, virtually eliminating the risk of code sniffing and unauthorized duplication. Read range between the CanProx One transmitter and receiver is field adjustable, with a maximum of up to 100 feet. With a nominal physical size of 58.4 mm x 33 mm x 12.7 mm (2.3 in x 1.3 in x 0.5 in) and a red LED indicator, the easy-to-carry transmitter is delivered equipped for easy attachment to a key ring. Transmitters are sequentially coded in either a standard 26-bit or Cansec 37-bit Wiegand format, all with exact number sequences. This makes it easy to add this RF product to any standard access control system. As a cross-reference, the transmitter s internal ID number is marked on its back. THE CANPROX ONE WIRELESS RECEIVER The CanProx One Wireless Receiver operates from 8 to 24 VDC, with a nominal current draw of 80 ma. Housed in a weather-resistant enclosure, the physical size of the receiver is 160 mm x 89 mm x 61mm (6.3 in x 3.5 in x 2.4 in). It includes a drill template providing mounting provisions to a North American or European wall box, as well as pre-drilled holes in the four corners allowing installation to a flat surface. The receiver includes beeper and multi-colour LED indicators. Converting the receiver to two channels allows the transmitter data to travel over a pair of Wiegand outputs. Formatting of outputted Wiegand data is dependent upon the specific programmed format of the individual CanProx One transmitter. *Note: the Dual Technology RF Transmitter works as a prox credential only with the CanProx One Proximity Reader. CanProx One Dual Technology RF Transmitter Page 3 of 7
Specifications CANPROX ONE DUAL TECHNOLOGY RF TRANSMITTER Power Requirements Read Range Button Pressed 46 m (100 feet) max. Presentation 508 mm (2 inches) max. Operation Frequency Button Pressed 433 MHz Replaceable 27A, NM27 Sized 12 Volt Alkaline Battery Presentation 125 khz Proximity Operating Temperature -25 C to 50 C (13 F to 122 F) Formats Secure Transmission Technology User Indicator Dimensions Weight Wiegand (standard 26-bit or Cansec 37-bit) Rolling code + custom tiny encryption algorithm Red LED, flashes upon button pressed 33 mm x 10.2 mm x 58.4 mm (1.3 in x 0.40 in x 2.3 in) 21.8 g (0.8 oz.) CANPROX ONE WIRELESS RECEIVER Power Requirements Read Range 8 to 24 VDC at 80 ma Installer Adjustable Up to 46m (100 feet) Operation Frequency Long Range 433 MHz Formats Secure Transmission Technology User Indicator Dimensions Weight Wiegand (standard 26-bit or Cansec 37-bit) Rolling code + custom tiny encryption algorithm Functional LED1 & LED2, see notes 86.4 mm x 58 mm x 160 mm (3.4 in x 2.3 in x 6.3 in) 289.3g (9.3 oz.) Specifications subject to change without prior notice. CanProx One Dual Technology RF Transmitter Page 4 of 7
Transmitter/Receiver Layout CANPROX ONE DUAL TECHNOLOGY RF TRANSMITTER CANPROX ONE DUAL TECHNOLOGY RF RECEIVER CanProx One Dual Technology RF Transmitter Page 5 of 7
Receiver Wiring with SmartLock Pro Controller CanProx One Dual Technology RF Transmitter Page 6 of 7
Typical Configuration CANPROX ONE DUAL TECHNOLOGY RF TRANSMITTER / WIRELESS RECEIVER SmartLock is a registered trademark of Cansec Systems Ltd. CanProx One Dual Technology RF Transmitter Page 7 of 7