RGB Light Panel Applications. RGB LED Light Panel FEATURES & BENEFITS SPECIFICATION SHEET

Transcription

1 RGB LED Light Panel E E FEATURES & BENEFITS AVAILABLE IN CUSTOM SIZES & SHAPES CAN BE USED IN FRAMELESS DESIGNS 3D V-CUTTING TECHNOLOGY MULTI-COLOR OPTION HIGH BRIGHTNESS (2,000-10,000 LUX) PATENTED HEAT SINK TECHNOLOGY TO MAXIMIZE LED LIFESPAN (70,000 HOURS) LOW POWER CONSUMPTION (70% LESS THAN FLUORESCENT) ENERGY SAVING AND MAINTENANCE FREE SUPERIOR CONSISTENT LIGHT QUALITY ADVANCED 3-YEAR WARRANTY The LumiSheet RGB Light Panel is designed to emit a bright, even output of light across the entire surface of the panel. Unlike traditional light panels, which have the light source mounted on the exterior of the LGP (Light Guide Plate), LumiSheet integrates high brightness LEDs and heat sink into our exclusive 3D V-cutting LGP which makes it possible to produce "frameless", rectangular or special shaped LED light panels for various application needs. PROFILE OF LUMISHEET RGB Length Max. 105" (2680mm) 25/64" (10 mm) LED Strip LED Chip Optical Acrylic Panel Integrated Heat Sink RGB Light Panel Applications Width Max. 49" (1250mm) Power lead: Standard: 5' (1500mm) length with bare wire end. The power lead can be located around the perimeter of the panel as required by the size of the panel, or the back of the panel. Depth 25/64" (10mm) P.1

2 LED Light Location LED light along 1 long edge LED light along 2 long edges Width LESS than 12" (305mm) Width GREATER than 12" (305mm) LEDs Max (L): 105" (2680mm) LEDs Max (L): 105" (2680mm) LED light along all 4 edges FOR SQUARE PANELS For example: 36" x 36" or 48" x 48" LEDs **This is only recommended for when panels are "nearly" square. It is not recommended for long narrow panels. Illuminated Face Options Single Face Illumination (Standard) Double Face Illumination (Option) Illuminated Front Face Non-Illuminated Back Face (with reflective white backer) Both Front and Back Face Illuminated (no reflective white backer) P.2

3 Specifications Input Voltage Power Consumption Wire Size Wiring Connector SPECIFICATION SHEET LumiSheet - RGB LED Light Panel Electrical 12 Volt DC Max 5.0 Watts/ft 20 AWG 4 wire Each panel must have direct connection to power supply. Do not wire panels in series Bare wire. Standard 5' (1500mm), Optional 10' (3000mm) Certification UL / cul (E346146, E325925) Color Temperature Mounting Physical RGB - Full color Wall mounted with screws, Z-clips, U-channel, mirror clips or Mounting with Stand offs Operating Temperature - 30 C ( - 22 F ) ~ + 40 C ( F ) Environment Dry location only (Standard) Wet location (Custom) Minimum Size Maximum Size 2"W x 2"L x 25/64" D (50mm x 50mm x 10mm) 49"W x 105"L x 25/64"D (1250mm x 2680mm x 10mm) Weight 2.35 lbs /sq. ft kg/sq. M RGB Control Accessories Stand alone or DMX control Plug-In Power Adaptors Power Adaptors 12V DC, 1A, 12W, UL listed 12V DC, 5A, 60W, UL class 2 listed Power Adaptors: Hardwire Power Adaptors PA-60W-HW 60W 12V Hardwire power adaptor Input 110V AC ~ 240V AC PA-150W-HW: 150W 12V Hardwire power adaptor Input 110V AC ~ 240V AC Color Temperature: RGB Max Size & Min Size 49"(1,250mm) Max Size 105" (2,680mm) Min Size 2" (50mm) Max Size Min Size 2"(50mm) 72" (1,800mm) 49" (1,250mm) E E LumiSheet can be made from min. 2"(50mm) X 2"(50mm) to max. 49"(1,250mm) X 105" (2680mm) P.3

4 Installation Tips Single Panel Multi-Panel Side View Diffuser or Graphic 0.25" (6mm) 1.5" (38mm) space between Panels and Graphic / Diffuser 0.75" (19mm) 3D View LED Panels LEDs 1.5" LED Panels Diffuser or Graphic Typically LEDs are installed along a groove 0.25" away from the edge. To completely hide the LED light source (Hot Spots), recess the light panel into the fixture / frame by a minimum of 0.75" distance. When placing panels side by side to form a longer panel, you may see a "hot line" where they meet. To avoid this you can use a diffuser (9mm thick or more) or leave a space (gap) of 1.5" or more between the light panel and front graphic etc. Typical Power Cord Exits Standard 1 Standard 2 Power cord exits from short side (edge) corner (standard) Power cord exits from the middle of each long side for Lumisheet longer than 6 ft Option 1 Option 2 Power cord exits from the back side of Lumisheet Recessed (notched) power cord exits P.4

5 Surface Mounting Option 1 Option 2 Screw mounting with pre-drilled holes Mounting with mirror clips Option 3 Option 4 Mounting with Z-clips Mounting with Stand offs P.5

6 PHOTO E E RGB Controllers RGB OPTION 1: LUMISHEET RGB - MINI RGB CONTROLLER AND REMOTE KC-32-MINI Mini RGB RECEPTOR (controller) Controller 3 CHANNEL RGB CONSTANT VOLTAGE CONTROLLER - MAX. 5A PER CHANNEL - 12V - DIMMENSIONS: 177MM L X 45 MM W X 21 MM D - WEIGHT: 95G FEATURES: - RF SIGNAL - MULITIPLE COLOUR CYCLE OPTIONS - 8 SPEED ADJUSTMENT LEVELS - BRIGHTNESS CONTROL - INDIVIDUAL COLOUR CONTROL KS-RGB-L01 RF REMOTE REMOTE ➃ ➄ ➀ ➂ ➁ ➅ ➆ ➇ - RADIO FREQUENCY - 433KHZ - 2 X AAA BATTERIES Operation Button ➀ MODE Change the color mode ➁ SP+ Flash / Fading speed plus ➂ SP- Flash / Fading speed minus ➃ BR+ Bright plus ➄ BR- Bright minus ➅ R Increase / Decrease Red by ➆ G Increase / Decrease Green by or or FEATURES: - 3 CHANNEL RGB CONSTANT VOLTAGE CONTROLLER, THE MAX CURRENT OF EACH CHANNEL UP TO 5A - MULTI-COLOR MODE TO SELECT (FLASHING / FADING) - CAN SET TO ANY STATIC COLOR -CAN ADJUST THE BRIGHTNESS FROM 0 TO 100% - 8 SCALE SPEED - LEARN IN FUNCTION, NEVER MISS WITH OTHER RECEPTOR OR REMOTE CONTROL - RF - ONE REMOTE CAN BE SYNCHRONIZED TO CONTROL MULTIPLE CONTROLLERS - SETTINGS REMAIN IN MEMMORY EVEN WHEN POWERED OFF ➇ B Increase / Decrease Blue by or Wiring 12VDC Output GND + _ Mini RGB Controller KC-32-mini + R G B White Red Green Black RGB LED Light Panel (up to 60W Max. each Channel) P.6

7 RGB OPTION 2: LUMISHEET RGB - DMX CONTROLLOR DMX KEY(KC 24/5A Decoder) RGB Color Controller/Decoder PART NUMBER INPUT POWER OUTPUT DMX STANDARD SIZE WEIGHT STORAGE TEMPERATURE ADDRESS SETTING IN DMX MASTER MODE KC 24/5A DECODER DC12V R, G, B, V+ (12V), MAX 60W EACH CHANNEL DMX512/ (L) X 44 (W) X 25 (H) MM 115G 15 TO 85 DEGREES THERE ARE 3 DIGITS ON THE UNIT FOR SETTING ADDRESS. PRESS THE ON TOP OR THE + BELOW THE 3 DIGITS TO DECREASE OR INCREASE THE ADDRESS NUMBERS. If the addresses of a DMX-KEY is set between 71x 99x, the unit is automatically set as the DMX Master. The first 2 digit numbers 71 to 99 represent the pre-set programs while the 3rd digit indicates the color changing speed. 0 indicates a slow speed and 9 indicates a fast speed. For a list of all the pre-set programs available, please refer to the list below. Program No. Description Remark 70 OFF 71 Seven Color Jumping Seven color refers to the colors in below 72 Seven Color Fading 73 Seven Color Jumping and Fading 74 Seven Color Tail Chasing 75 Seven Color Water Flowing 76 Execute programs 71, 72, 73, 74, 75 and repeat 77 Red 78 Green 79 Blue 80 Yellow 81 Purple 82 Cyan 83 White 84 Red Fading 85 Green Fading 86 Blue Fading 87 Yellow Fading 88 Purple Fading 89 Cyan Fading 90 White Fading 91 Seven Color Fading Recycle 92 Red Flashing 93 Green Flashing 94 Blue Flashing 95 Yellow Flashing 96 Purple Flashing 97 Cyan Flashing 98 White Flashing 99 Seven Color Flashing ** Please Contact DLC for wiring instructions In DMX decoder mode, all 3 digits are used for address setting. The address ranges from 001 to 512. The decoder changes colors according to incoming DMX signals. When the address is set between , the DMX KEY functions as a DMX decoder (DMX slave) and the pre set programs do not function. The decoder changes colors according to incoming DMX signals. There is one address difference between R, G and B. For example if Red is 001, then Green is 002, and Blue is 003. To operate each decoder independently, you must offset each address by 3 (e.g. 001, 004, 007, ). For example, to synchronize all decoders all addresses can be set as 001. P.7

8 Plug-In Power Adaptor Power Supply (DSA-12G-12FUS) SPECIFICATION SHEET 12 Watt Plug-In Power Supply; Input Voltage: 110AC - 240AC 2 3/4" (70mm) 68" (1730mm) 1" (25.4mm) 1 5/8" (41mm) Power Supply (PA-60W-i5) 60 Watt Plug-In Power Supply; Input Voltage: 110AC - 240AC 9 1/16" (230mm) 60" (1500mm) 70" (1800mm) 1 1/2" (38mm) 7 7/8" (200mm) 1 1/4" (32mm) Class 2 Hardwire Power Adaptors Power Supply (PA-60W-HW) 60 Watt 12V Hardwire Power Supply ; Input Voltage: 110AC - 240AC 9 1/16" (230mm) 70 7/8" (1800mm) 1 1/2" (38mm) 7 7/8" (200mm) Class 2 Power Supply (PA-150W-HW) 1 1/4" (32mm) 150 Watt 12V Hardwire Power Supply ; Input Voltage: 110AC - 240V AC, IP65 Outdoor Rated 8 7/8" (222.2mm) 7 13/16" (198.2mm) 11 13/16" (300mm) 1 1/2" (38mm) Order Information Series # - LLP 12 10mm RGB 12V Series # /16" (300mm) LumiSheet - RGB LED Light Panel Size Length x Width (inch/mm)* - Color Temperature - Illuminated Face Option - CS - Custom shape - RGB - Full Color - SFI - Single face* (drawing may be required) - DFI - Double face * Denotes standard configuration of rectangular or square light panel Size Length x Width (inch/mm)* - Color Temperature - Illuminated Face Option - Cable Length - LED Location - WL15-5' (1500mm) power cord with free leads* - WL30-10' (3000mm) cord with free leads - L1 - LED along 1 long edge - L2 - LED along 2 long edges* - S1 - LED along 1 short edge - S2 - LED along 2 short edges - S4 - LED along All 4 edges - CI - Custom Illumination - Cable Length - LED Location LLP12-24" x 36" - RGB - SFI - WL15 - L2 P.8