Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility

Transcription

1 Electric Vehicle Charging Solutions Powering the Future of Sustainable Mobility Catalog 2800CT1001R02/ Class 2800 CONTENTS Description Page 2 Indoor Charging Stations Page 3 Outdoor Charging Stations Page 5 Wall-Mount Page 5 Outdoor, Non-Networked, Pedestal-Mount Page 6 Outdoor, Networked, Pedestal-Mount Page 8 RFID Accessories Page 10 Dimensions Page 11

2 Description Description Smart Charging, Smart Savings, Smart Grid Schneider Electric has developed a line of Electric Vehicle (EV) charging solutions for your unique needs. Schneider Electric will work with you to deliver the best charging infrastructure solution that includes product, installation, maintenance, and an infrastructure management system. Our EV charging products are compatible with safety standards and industry specific standards, such as the Society of Automotive Engineers standards (SAE J1772). Residential Charging Solutions Our residential charging stations provide simple, easy-to-install, and userfriendly solutions for charging electric vehicles at home. Installations are provided by a network of licensed installers. Commercial and Fleet Charging Solutions Fleet and commercial customers can count on charging solutions that offer convenient public and private access. 2

3 Indoor Charging Stations Indoor Charging Stations Features Interface: Segmented charge and delay charge progress indicator Stop Button and Indicator Power status and system detected fault indicator Delay button and indicator Enclosure: Non-metallic Indoor wall-mount (stud, drywall, or masonry wall) Protection: Integral Ground Fault Protection: EV230WS 20 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss Cable Holder: Supports and helps organize the cable Independently mounted from enclosure EV230WS (shown with skin) Connector and Cord: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) EV230WS Indoor Charging Stations Residential Applications Catalog Numbers Table 1: Catalog Number Indoor Charging Station Wall-Mount Output Voltage System Output Current Mounting Type Charging Units Application Features EV230WS Vac 30 A Wall Single Indoor Delay Start 3

4 Indoor Charging Stations Technical Specifications Figure 1: N L1 L2 120 V 120 V Indoor Charging Station Wiring Diagrams V Solid Neutral Ground Overcurrent Protection Device Equipment Ground Electric Vehicle Charging Station EV230WS 208/240 Vac Table 2: Power Specifications Indoor Charging Stations Input Power EV230WS Vac, single-phase, 60 Hz, 30 A maximum Input Power Connection Line 1, Line 2, and Ground Feeder Circuit Breaker 2-pole, 40 A, non-gfci type Output Power EV230WS Vac, 30 A, 7.2 kw max. Physical Specifications Enclosure Type Type 1 (Indoor only) Enclosure Dimensions See dimensions on page 11 Enclosure Mounting Wall-mount Cable Type SAE J1772 Cable Length 18 ft. (5.5 m) Cable Management Non-retractable, separate from the enclosure Shipping Weight 17.0 lbs. (7.71 kg) User Interface Power Available Charging Ground Fault System Detected Fault Delay Start Status indicator Eight-segment progress indicator Red status indicator Push button and red stop indicator Push button to delay up to eight hours, in one-hour increments Protection Ground Fault Protection EV230WS Integral, CCID 20 ma, auto reset Ground Fault Protection System Test Automatic at the beginning of each charge cycle Environmental Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions -22 F to 131 F (-30 C to 55 C) 15 kv open air, 8 kv contact 6 kv 20 V/m 20 V 2 kv FCC Class B Standards Compliance NEC Article 625 SAE J1772 UL

5 Outdoor Charging Stations Outdoor Charging Stations Wall-Mount Features Protection: Interface: Power status Charge indicator System detected fault indicator Authentication: Localized RFID solution (optional) Integral Ground Fault Protection at 20 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss Enclosure: Metallic enclosure Indoor/outdoor wall-mount Cable Holder: Connector dock Supports and helps organize the cable Independently mounted from enclosure Connector and Cord: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) Outdoor Wall-Mount Charging Station Residential and Commercial Applications Catalog Numbers Table 3: Outdoor Charging Stations Wall-Mount Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Features EV230WSR Vac 30 A Wall Single Indoor/Outdoor EV230WSRR Vac 30 A Wall Single Indoor/Outdoor RFID (non-networked) 5

6 Outdoor Charging Stations Outdoor, Non-Networked, Pedestal-Mount Features Interface: Power status Charge indicator System detected fault indicator Authentication: Localized RFID solution (optional) Holders for Connector and Cable: Support and help organize cables Connector storage dock Integral with the enclosure Connector and Cable: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) Enclosure and Mounting: Metallic enclosure Metallic mounting pedestal Protection: Integral Ground Fault Protection at 20 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss NOTE: Dual charging unit shown see Table 4 for single charging unit options Commercial Applications Catalog Numbers Table 4: Outdoor Charging Stations Pedestal-Mount Catalog Number Output Voltage System Output Current Mounting Type Charging Units Application Authentication EV230PSR Single EV230PDR Dual Vac 30 A Pedestal Outdoor EV230PSRR Single RFID (non-networked) EV230PDRR Dual RFID (non-networked) 6

7 Outdoor Charging Stations Technical Specifications Table 5: Outdoor Non-Networked Wall-Mount and Pedestal-Mount Charging Stations Power Specifications (Each charging unit) Input Power Input Power Connection Feeder Circuit Breaker Output Power Vac, 30 A, single phase, 60 Hz Line 1, Line 2, and Ground 2-pole, 40 A, non-gfci type Vac, 30 A Physical Specifications Outdoor Non-Networked Wall-Mount Enclosure Type Type 3R Enclosure Dimensions See dimensions on pages 11 and 12 Enclosure Mounting Wall or Pedestal Cable Type SAE J1772 Cable Length 18 ft. (5.5 m) Cable Management Non-retractable, integral with the enclosure Single unit (Wall-mount) 38 lbs. (17 kg) Unit Options / Shipping Weights Single unit (Pedestal-mount) 92 lbs. (42 kg) Dual unit (Pedestal-mount) 106 lbs. (48 kg) Single Non-Networked Unit Dual Non-Networked User Interface Power Available Charging System Detected Fault Status indicator Blinking blue indicator Red status indicator Authentication Type Programming Non-networked RFID authentication card Radio frequency remote control Protection Ground Fault Protection Ground Fault Protection System Test Integral, CCID 20 ma, auto reset Automatic test at the beginning of each charge cycle Environmental Outdoor Non-Networked Pedestal-Mount Units Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions -22 F to 131 F (-30 C to 55 C) 15 kv open air, 8 kv contact 6 kv 20 V/m 20 V 2 kv FCC Class B Standards Compliance NEC Article 625 SAE J1772 UL

8 Outdoor Charging Stations Outdoor, Networked, Pedestal-Mount Features Network Connectivity (gateway unit, two antennae): Wireless communication to server via cellular network IEEE wireless communication with non-gateway units Station location and occupancy status via network Remote monitoring of status and power usage Enables remote maintenance services NOTE: At least one gateway unit is required for each cluster of networked charging stations. A gateway unit establishes a cellular connection for each non-gateway (networked) unit on a cluster. A gateway unit is required for a single-unit installation. Interface: Backlit color LCD screen displays charging instructions, charging status, and usage fees Red indicator lights on front panel for system detected faults Authentication: ChargePoint card or Contactless credit card Track customer usage history Optional payment by time/energy usage Network Connectivity (non-gateway units, single antenna): IEEE wireless communication with gateway unit 150 ft (45 m) near line of sight communication range Holders for Connector and Cable: Support and help organize cables Connector storage dock Integral with the enclosure Connector and Cable: Complies with SAE J1772 Cable length: 18 ft. (5.5 meter) Enclosure and Mounting: Metallic enclosure Metallic mounting pedestal Protection: Integral Ground Fault Protection at 20 ma Ground fault function tested before each charge cycle begins Auto restart after ground fault or main power loss NOTE: Dual gateway charging unit shown see Table 6 for single charging unit and non-gateway options. Commercial Applications Catalog Numbers Table 6: Outdoor Networked Charging Stations Pedestal-Mount Catalog Number Unit Type Output Voltage System Output Current Mounting Type Charging Units Application Network EV230PSRACG Gateway Server: cellular Single Local: EV230PSRACNG Non-Gateway Local: EV230PDRACG Gateway Vac 30 A Pedestal Server: cellular Dual Outdoor Local: EV230PDRACNG Non-Gateway Local: EV230PSRACGC 1 Single Server: cellular Gateway EV230PDRACGC1 Dual Local: These products are designed specifically for use in Canada. 8

9 Outdoor Charging Stations Technical Specifications Single Networked Non-Gateway Unit Dual Networked Non-Gateway Unit Table 7: Outdoor Networked Pedestal-Mount Charging Stations Power Specifications (Each charging unit) Input Power Vac, 30 A, single phase, 60 Hz Input Power Connection Line 1, Line 2, and Ground Feeder Circuit Breaker 2-pole, 40 A, non-gfci type Output Power Vac, 30 A Physical Specifications Enclosure Type Type 3R Enclosure Dimensions See dimensions on page 12 Enclosure Mounting Pedestal Cable Type SAE J1772 Cable Length 18 ft. (5.5 m) Cable Management Non-retractable, integral with the enclosure Unit Options / Shipping Weights Single networked unit (gateway) Single networked unit (non-gateway) Dual networked unit (gateway) Dual networked unit (non-gateway) 101 lbs. (45.8 kg) 115 lbs. (52 kg) User Interface Outdoor Networked Non-Gateway Pedestal-Mount Units Single Networked Gateway Unit Dual Networked Gateway Unit Charging Instructions and Status Error Messages System Detected Fault Authentication Option 1 Option 2 Programming Protection Ground Fault Protection Ground Fault Protection System Test Backlit LCD color display Backlit LCD color display Red indicator light(s) on front panel ChargePoint card Contactless Credit card ChargePoint cellular network system Integral, CCID 20 ma, auto reset Automatic test at the beginning of each charge cycle Environmental Operating Temperature Electro-static Discharge Surge Radiated Immunity Conducted Immunity Electrical Fast Transient/Burst (EFTB) Emissions -22 F to 104 F (-30 C to 40 C) 15 kv open air, 8 kv contact 6 kv 20 V/m 20 V 2 kv FCC Class B Standards Compliance NEC Article 625 SAE J1772 UL 2594 Outdoor Networked Gateway Pedestal-Mount Units 9

10 Radio Frequency Identification (RFID) Accessories Radio Frequency Identification (RFID) Accessories The RFID solution for Level 2 Schneider Electric EV charging stations consists of the following accessories: Handheld Programmer (EVRFIDHP) RFID Authentication Cards (EVRFIDKF) Handheld Programmer Features Used to add and remove users One needed for total charging station system Connects via radio frequency Feedback via audio tone and LED indicator on Proximity Reader 4-digit PIN access Technical Specifications EVRFIDHP Frequency 125 khz / 62.5 khz Dimensions See dimensions on page 13 Weight 7 oz. (200 g) Operating Temperature -22 F to 131 F (-30 C to 55 C) Color Black Material ABS Description RFID Handheld Programmer Catalog Number EVRFIDHP RFID Authentication Cards Features (Level 2 chargers only) Wallet friendly Robust and durable design Industry standard format Unique ID codes Technical Specifications Frequency 125 khz / 62.5 khz Weight 0.31 oz. (8.8 g) Operating Temperature -40 F to 158 F (-40 C to +70 C) Humidity 0 100% non-condensing Material ABS EVRFIDKF-10 Description RFID Authentication Card (Quantity of 10) Catalog Number EVRFIDKF-10 10

11 Dimensions Dimensions Indoor Wall-Mount Charging Stations Figure 2: Indoor Wall-Mount Charging Station Dimensions: in. (mm) 9.53 (242) 4.4 (111) 12.7 (323) Outdoor Wall-Mount Charging Stations Figure 3: Outdoor Wall-Mount Charging Station Figure 4: Wall-Mount Cable Bracket with Connector Dock 9.8 (250) 4.0 (102) Dimensions: in. (mm) 5.8 (148) Dimensions: in. (mm) 13.1 (333) 7.1 (181) 6.7 (170) 5.0 (127) 3.8 (97) 20.5 (521) 18.1 (460) 2.0 (50.8) 11

12 Dimensions Outdoor Pedestal-Mount Charging Stations Figure 5: Non-Networked Pedestal-Mount Charging Stations Figure 6: Networked Pedestal-Mount Charging Stations Single Unit Dual Unit Single Unit Dual Unit 13.0 (330) 13.0 (330) 6.7 (170) 0.87 (22) 13.0 (330) See Note * 13.0 (330) 7.0 (179) 49.9 (1267) 49.9 (1267) 6.6 (166.5) 6.7 (170) 7.9 (200) 7.9 (200) 5.2 (133) 7.9 (200) 7.9 (200) 5.2 (133) * NOTE: Left antenna is present on gateway units only in. Dimensions: (mm) in. Dimensions: (mm) Figure 7: Pedestal Base for Outdoor Charging Stations 7.9 (200) in. Dimensions: (mm) 7.9 (200) 5.9 (150) 2x 1.8 (46) 2x 4.3 (108) 2x 3.9 (98) 4.1 (103) 2x.70 (17.5) 3.0 (76.2) 4x R.30 (7.5) 12

13 Dimensions RFID Accessory Dimensions Figure 8: Handheld Programmer for Level 2 RFID Units Figure 9: RFID Authentication Cards in. Dimensions: (mm) 7.0 (178) 3.37 (85.5) in. Dimensions: (mm) 2.5 (63.5).75 (19) 2.13 (54).034 (.86) 13

14 Dimensions 14

15 Dimensions 15

16 Schneider Electric USA, Inc S. Roselle Road Palatine, IL USA Schneider Electric and EVlink are trademarks or registered trademarks of Schneider Electric. All other trademarks are property of their respective owners. 2800CT1001R02/13 Replaces 2800CT1001R07/12