OFFICE OF INFORMATION TECHNOLOGY EDUROAM SETUP IN SUTD VERSION 1.1 1 SEPTEMBER 2016 Page 1
Contents 1. Purpose... 3 2. Windows 7 Setup for eduroam... 3 3. Windows 10 Setup for eduroam... 11 4. ios Setup for eduroam... 20 5. Android Setup for eduroam... 23 Page 2
EDUROAM SETUP 1. Purpose This document describes the steps for Staff and Students to configure their Notebooks and computing devices for login to eduroam service at SUTD and participating institutions. To use eduroam, users will need to configure the wireless profile manually for the first time in their respective devices. After which, they will be able to login seamlessly at participating institutions. Note that the user name must be in the format of UserName@sutd.edu.sg. For example, if a SUTD staff s network account userid is peter_lim, then the eduroam ID will be peter_lim@sutd.edu.sg to login to eduroam service. Also, if a student s network account userid is 0000001, his/her eduroam ID will be 0000001@sutd.edu.sg to login to eduroam service. In line with SUTD s Password Policy, the eduroam account password will be tied to the network account and will be required to change together with the network account password every 90 days. 2. Windows 7 Setup for eduroam 2.1 From the Windows desktop, click on button and navigate to "Control Panel". Page 3
2.2 At "Control Panel" menu, click on "Network and Internet", and then "Network and Sharing Center" as shown below: 2.3 Choose "Set up a new connection or Network". Page 4
2.4 Click "add" then click "Manually connect to a wireless network". 2.5 Click "Manually create a network profile". Page 5
2.6 Set the network Name for "eduroam" (please note that all characters are in lower case). Select Security type to WPA2 Enterprise, Encryption AES. Check the checkbox "Connect even if the network is not broadcasting". Then, click Next to proceed. 2.7 Click "Next" and you should see a "Successfully added eduroam". Page 6
2.8 Select the [Security] Tab 2.9 Select Advance settings. Page 7
2.10 Click on "Change connection settings", click on Security tab, and follow by "Settings". 2.11 Under "Settings", uncheck "Validate server certificate" checkbox. Page 8
2.12 Click on "Configure" and uncheck "Automatically use my Windows logon name and password (and domain if any)" checkbox. Click "OK" until all the dialog boxes exit. 2.13 Ensure that the option for [Specify authentication mode] is checked and [User or computer authentication] selected as shown below. 2.14 When near a wireless spot where eduroam is available, click the network icon on the lower right hand side of the screen. Click eduroam and click "Connect". Page 9
2.15 When prompted, key in your network account username and password. 2.16 Once authenticated, you will be connected successfully as shown below. 2.17 After eduroam configuration, please revert to the Staff/Student wireless service (SSID) respectively as shown below. This is to ensure that you will still be in the correct network profile thereafter. Page 10
3. Windows 10 Setup for eduroam 3.1. From the Desktop, click on button and navigate to Control Panel: 3.2. At Control Panel menu click on Network and Internet: Page 11
3.3. Then click on Network and Sharing Centre: 3.4. Click on Set up a new connection or network: Page 12
3.5. Click on Manually connect to a wireless network: 3.6. Set the Network Name as eduroam (please note that all characters MUST be in lower case). Select Security type to WPA2 Enterprise and Encryption type as AES. Check the checkbox Connect even if the network is not broadcasting. Then, click Next to proceed: Page 13
3.7. A Successfully added eduroam prompt should appear. Then, click on Change connection settings: 3.8. eduroam Wireless Network Properties should pop up, click on the Security Tab: Page 14
3.9. Click on Settings: Page 15
3.10. Uncheck Verify the server s identity by validating the certificate. Then click on Configure: 3.11. Uncheck Automatically use my Windows log on name and password (and domain if any) then click on OK: Page 16
3.12. When the dialog box exits, click on Advanced Settings: 3.13. In Advanced settings, check Specify authentication mode and User or computer authentication is selected, then click OK to exit Advanced settings. Then click on Close on the main Change connection settings window to exit the wireless configuration entirely: Page 17
3.14. When near an area where eduroam wireless connection is available click on the network icon on the lower right of the Desktop, then click on eduroam and click Connect (do not check Connect automatically): 3.15. You will be prompted to Sign in. Key in your Network account Username and Password: 3.16. Once authenticated, you will be connected as shown below: Page 18
3.17. After eduroam configuration, please revert to Staff/Student (SUTD_Staff or SUTD_Student) wireless service (SSID) respectively as shown below. This is to ensure that you will still be in the correct network profile thereafter: Page 19
4. ios Setup for eduroam 4.1 Go to Settings. 4.2 Choose eduroam wireless network and click to connect. Page 20
4.3 Enter your network ID (username) with SUTD domain sutd.edu.sg and your network password. (See example at next step). 4.4 Enter network ID with domain sutd.edu.sg. For example your network id 199999 and add on SUTD domain sutd.edu.sg like 199999@sutd.edu.sg as below and click Join to connect. Page 21
4.5 After entered correct username with password, click on Trust on certificate to continue. 4.6 Eduroam wireless network will show tick and connected successfully. Page 22
5. Android Setup for eduroam 5.1 Go to settings. 5.2 Go to Wi Fi. Page 23
5.3 Click on eduroam wireless network to connect. 5.4 Enter Identity as your network ID (username) with SUTD domain sutd.edu.sg and your network password. (See example at next step). Page 24
5.5 For example your network id 199999 then add on sutd.edu.sg, example 199999@sutd.edu.sg as below and enter network password then click connect. 5.6 Finally, it will be connected to eduroam wireless network after enter correct username and password. Page 25