Art.-Nr greentea. Art.-Nr whitemusk MAGICUS. 1 Stück/piece 2,5. 4 x 4 x 4 x. 1 x

Similar documents
APPLICATION SETUP DOCUMENT

Quick Start Guide UTM 110/120

EK908FHL - Thermostat for floor heating

Building an Architecture Model Entwerfen Sie mit AxiomSys ein Kontextdiagramm, das folgendermaßen aussieht:

AN500T, AN1000, AN1000T, AN1500, AN1500T AN2000, AN2000T

How To Connect A Webadmin To A Powerpoint (Utm) From A Usb To A Usb (Net) Or Ipa (Netlan) Device (Netbook) From Your Computer Or Ipam (Netnet

Metering PDU Manual DN DN-95602

PS42309C INSTRUCTION MANUAL

QAS DEBUG - User und Computer

Software / FileMaker / Plug-Ins Mailit 6 for FileMaker 10-13

Upgrade-Preisliste. Upgrade Price List

SPICE auf der Überholspur. Vergleich von ISO (TR) und Automotive SPICE

Stove Guard Kit User Manual


Fused Spur Time Switch

Smart moulds intelligente Formen

Programmable Room Thermostat 7 Day (5-2 Day) Models: / Power Supply: Battery / Mains

Stefan Engelberg (IDS Mannheim), Workshop Corpora in Lexical Research, Bucharest, Nov [Folie 1]

Operating Instructions Center plate for Timer Thermostat/ Insert

BACKUP EAGLE. Release Notes. Version: Date: 11/25/2011

CM702 PROGRAMMABLE THERMOSTAT FEATURES PRODUCT SPECIFICATION SHEET

CROSS. Warranty with SAGA2. SAGA2 warranty_

RCS-TM80BG. Contents 4. Weekly Program Function... EG-6 5. Outing Function... EG Sleeping Function... EG-14 XXX XXXX XXXX XXXX XXXX

Operating instructions for built-in electronic timers with Day and Week programms. Series 884

HDTV Anywhere USER MANUAL / HDTV Anywhere ALL RIGHTS RESERVED MARMITEK

MUSTER. ENGLISH G 21/D3 Test No. 1 Unit 1: My London. 1 LISTENING The London Eye. G - Level: Listen to three texts and tick the correct box.

Microsoft Certified IT Professional (MCITP) MCTS: Windows 7, Configuration ( )

OPERATION MANUAL MARSDEN-200 PLEASE TAKE THE TIME TO READ THESE INSTRUCTIONS BEFORE STARTING TO USE THE SCALES

Diese Liste wird präsentiert von. Netheweb.de

Search Engines Chapter 2 Architecture Felix Naumann

Operation Guide 3M-22

BW-500 BED WEIGHER USER MANUAL

1. Wenn der Spieler/die Spielerin noch keine IPIN hat, bitte auf den Button Register drücken

Exchange Synchronization AX 2012

Drayton Digistat +2RF/+3RF

ASTRONOMICAL TIME SWITCH NFC Supported AR-02D-NFC (2 x 10A)

Mode Switch. Fan Switch Menu button Program button

Halter/Reflektor Kombination Holder/Reflector combination

Table of Contents. Introduction. Radio Frequency Control. Initial setup Setting the time. Setting the temperature

Motion Activated Camera User Manual

Manuel d'instruction Operation Guide Bedienungsanleitung Instrucciones de Funcionamiento Istruzioni Guia de Operação Bedieningshandleiding

Programmieren von Schnittstellen für LiveCycle ES2-Modulen (November 2009)

Information for Ship Masters, Agents and Owners on Ship Waste Disposal

CORPORATE DESIGN MANUAL English 5/2015

Technische Alternative elektronische Steuerungsgerätegesellschaft mbh. A-3872 Amaliendorf, Langestr. 124 Tel +43 (0)

Dokumentation über die Übernahme von. "GS-R-3" (The Management System for Facilities and Activities) "Sicherheitskriterien für Kernkraftwerke"

User s Manual. Powerline 200M Ethernet Bridge

REMOTE TERMOMETER TE 219 LED USER MANUAL

user manual smappee monitor

IAC-BOX Network Integration. IAC-BOX Network Integration IACBOX.COM. Version English

MAGICAR M871A. Car alarm with two-way remote User s guide

CobraNet TM User s Manual

INSTALLATION AND OPERATING INSTRUCTIONS

LCD Display. Function keys. Stand. Adapter socket

TECHNISCHE INFORMATION NR. SI SERVICE INFORMATION NO. SI36-053

wdali Remote Datasheet DALI RF Remote Control Wireless DALI control unit with 12 programmable momentary switches

RAT DER EUROPÄISCHEN UNION. Brüssel, den 2. März 2012 (06.03) (OR. en) 6051/12 INF 11 API 11 JUR 50. I/A-PUNKT-VERMERK Gruppe "Information"

RDJ10RF/SET. Wireless room temperature controller with 24-hour time switch and LCD. Programmable, for heating systems

BRFplus Field Configuration for Portfolio Management

Cloud OS Network. Uwe Lüthy, Die Bedeutung einer Partner Managed Cloud für Kunden. Partner Technology Strategiest

Preparing RTF and MS Word Files with Untranslatable Content for SDL Trados TagEditor & Déjà Vu

Operations Manual Blast Chiller

Operating Manual for the Electronic Built-in Interval Timer. Micro II (Countdown Timer)

(51) Int Cl.: H04L 29/06 ( ) H04M 3/56 ( ) H04M 3/44 ( ) H04L 12/18 ( )

Manufacturer s Declaration of Conformity

PR-2500 Portable Receiver. Owner s Manual

1. Scope ebm-papst Mulfingen GmbH & Co. KG: ebm-papst St. Georgen GmbH & Co. KG: WN ebm-papst Landshut GmbH:

645 Vocal Element for KombiSIGN 71

1Copyright 2013, Oracle and/or its affiliates. All rights reserved.

Contents. What is Wirtschaftsmathematik?

IN-OUT Thermometer with Cable Free Sensor and Clock

Update to V10. Automic Support: Best Practices Josef Scharl. Please ask your questions here Event code 6262

Rain+Birdt. Simple To Set Timer (SST) Setup & Operation Instructions. English RAIN BIRD ( ) or visit

Implementing a PKI Infrastructure with Windows Server 2008/2012

Alarm clock User manual

(51) Int Cl.: G06F 11/14 ( ) G06F 12/08 ( )

Exemplar for Internal Assessment Resource German Level 1. Resource title: Planning a School Exchange

User manual. Videomatic VERDE MF

Weather Station TE 529EL USER MANUAL

QUICK START BALANCE AUDIO INTERFACE QUICK START DÉMARRAGE RAPIDE KURZANLEITUNG

Official Reference Copy

Operational Overview and Controls Guide. Two or Three Pump IronHeart Lite with Variable Frequency Drives

VoIP Gateway Routers. SmartNode Model 1200, 1400 & Quick Start Guide

Voraussetzungen/ Prerequisites *for English see below*

PBS CBW NLS IQ Enterprise Content Store

Gebrauchsanweisung und Medizinproduktebuch User manual and medical device booklet

LEARNING AGREEMENT FOR STUDIES

RCR-22 AM/MW 2 bands Digital Clock Radio instruction manual

LEHMAN BROTHERS SECURITIES N.V. LEHMAN BROTHERS (LUXEMBOURG) EQUITY FINANCE S.A.

StarterKit Embedded Control SC13 + DK51. From the electronic to the automation

Time Recorder. User Manual. PDF created with FinePrint pdffactory trial version

J2EE-Application Server

Bei Fragen zu dieser Änderung wenden Sie sich bitte an Ihren Kundenbetreuer, der Ihnen gerne weiterhilft.

Is Cloud relevant for SOA? Corsin Decurtins

Project Cost Reporting for PPM

Cal. 6A32 INSTRUCTIONS (P. 3) BEDIENUNGSANLEITUNG (S. 16) INSTRUCTIONS (P. 29) ISTRUZIONI (P. 42) INSTRUCCIONES (P. 55) INSTRUÇÕES (P.

Leitfaden für die Antragstellung zur Förderung einer nationalen Biomaterialbankeninitiative

GSM remote controller v7.0 / v7.0 PRO. Operating Instructions

The Changing Global Egg Industry

VIBRATION WATCH with: Vibration Alarm (won't disturb others). Beep Alarm (optional) Electro-Luminescent (EL) back light (for viewing display at

Transcription:

MAGICUS Art.-Nr. 4450900300 greentea 1 Stück/piece Art.-Nr. 4450900200 whitemusk 2,5 4 x 4 x 4 x 1 x

1. 2. 1 x Option 2 Option 1

3. 1 3 4 4. 1 1 x View of LCD: 2 AUTO 1 x INSTRUCTION MAN 230VAC, 50Hz 150 W 1 x Function of key: Taste Funktion Wechsel zwischen CLOCK und PR +/>> Um eins nach oben -/<< Um eins nach unten Wechsel zwischen OFF/AUTO OF Bestätigung der Einstellungen /COUNTDOWN Start der Countdown Funktion

5. 2 1 ca. 60 sec. = fill

View of LCD: 6. Setting the time ktion chsel zwis = CLOCK 7. Programming timer ktion chsel zwis = PROG 8. Settings Fun We = INTENSITY 3x 4 3 2 1 OFF 5 6 7 8 9 10 change intensity (3x) wait 10 sec. locked COLOR 3x OFF change color (3x) wait 10 sec. locked 9. Function of key: Timer active View of LCD: INSTRUCTION INSTRUCTION Taste Funktion Wechsel zwischen CLOCK und PROGRAM Modus +/>> Um eins nach oben -/<< Um eins nach unten Wechsel zwischen OFF/AUTO OFF/ON/AUTO ON Modus Bestätigung der Einstellungen /COUNTDOWN Start der Countdown Funktion RESET/R Reset aller Einstellungen = AUTO Function of key: Taste Funktion Wechsel zwischen CLOCK und PROGRAM Modus +/>> Um eins nach oben -/<< Um eins nach unten Wechsel zwischen OFF/AUTO OFF/ON/AUTO ON Modus Bestätigung der Einstellungen /COUNTDOWN Start der Countdown Funktion RESET/R Reset aller Einstellungen * For the first use please press the RESET button key! cifications of the timer: s provided with a buffer battery ily and weekly programmable week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off).. Setting the clock.1 Press key at clock display, will display on upper right corner. 2 Press key, MO will flash and start to set current time, use +/- ke weekday or weekend. Press key to confirm and hour will flash, u is correctly set. Press key to confirm an Press key to c Information for programming: http://www.hagleitner.com/en/downloads/aroma-diffuser/ * For the first use please press the RESET button key! Specifications of the timer: + It is provided with a buffer battery + Daily and weekly programmable + In a week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off). 1. Setting the clock

10. 1 2

SERVICE change 1 2 3 HOT CLEAN

SERVICE each year or 4 5 PUSH 2-5 min INTENSITY 10 25 min 0,5-1 lt. hot water 6 7 HOT CLEAN

Zeitschaltuhr Magicus Taste Funktion Wechsel zwischen CLOCK und PROGRAMM Modus +/>> Um eins nach oben -/<< Um eins nach unten /COUNTDOWN RESET/R Wechsel zwischen OFF/AUTO OFF/ ON/AUTO ON Modus Bestätigung der Einstellungen Start der Countdown Funktion Reset aller Einstellungen * Vor der ersten Verwendung RESET drücken! ger Ansicht Zeitschaltuhr MO AM 12:00 CLOCK PROG OFF Technische Daten: + Verfügt über eine Pufferbatterie + Täglich und wöchentlich programmierbar + In einer Woche können 9 Start und 9 Stop - Zeiten eingestellt werden. 1. Einstellen der Uhr: 1.1 Taste E drücken, CLOCK Erscheint rechts oben am Display. 1.2 Taste drücken, MO blinkt am Display, mit Taste + / - um den richtigen Wochentag einzustellen. 1.3 Taste drücken, die Stunden blinken nun, mit Taste + / - die richtige Uhrzeit einstellen, Kontrolle ob AM/PM richtig ist. 1.4 Taste drücken, die Minuten blinken nun, mit Taste + / - die richtige Uhrzeit einstellen. 1.5 Taste drücken um die Einstellungen abzuschließen. 2. Einstellen der Programme: 2.1 Taste drücken bis rechts am Display PROG erscheint, bis zu 9 Programme können eingestellt werden. 2.2 Taste drücken bis 1 ON am Display erscheint. 2.3 Taste drücken um mit der Einstellung zu beginnen, MO, TU, SU blinkt, verwende Taste +/- um den gewünschten Tag einzustellen. Nur Wochentage oder nur Wochenende sind ebenfalls möglich. 2.4 Taste drücken, die Stunden blinken nun, mit Taste + / - die richtige Uhrzeit einstellen, Kontrolle ob AM/PM richtig ist. 2.5 Taste drücken, die Minuten blinken nun, mit Taste + / - die richtige Uhrzeit einstellen. 2.6 Taste Ok drücken, um die Startzeit für PROG 1 ON abzuschließen. 2.7 Taste drücken 1 OFF erscheint am Display. 2.8 Taste Ok drücken um die Einstellungen für PROG 1OFF vorzunehmen, Punkt 4.3 4.6 durchnehmen. 2.9 Um mehrere Programme einzustellen Punkte 4.1 4.8 wiederholen, PROG 2 ON verwenden. 2.10 Nach Fertigstellung der Programmeinstellungen drücken sie die Taste für 2 sec. oder warten sie 1 Min., die Uhrenanzeige wird wieder dargestellt. 2.11 Um einzelne Programmeinstellungen zu ändern wählen sie das gewünschte Programm mit der Taste aus und drücken sie die Taste um es zu ändern. 2.12 Um einzelne Programme zu löschen wählen sie das gewünschte Programm mit der Taste aus und drücken sie die Taste, setzen sie die den gewünschten Tag unter Verwendung der Taste + / - auf -:--. 3. Betriebsmodus Timer: Taste drücken um den gewünschten Modus zu aktivieren: + OFF, der Ausgang ist ausgeschalten, Programme sind nicht aktiv. + ON, der Ausgang ist dauerhaft eingeschalten, Programme sind nicht aktiv. + AUTO OFF / AUTO ON, die Programme sind aktiv, OFF signalisiert, dass der Ausgang ausgeschalten ist, ON signalisiert, dass der Ausgang eingeschalten ist.

Timer Magicus eng Key Function shift between CLOCK and PROGRAM modes +/>> increase the number by 1 or hold to roll fast -/<< decrease the number by 1 or hold to roll fast /COUNTDOWN RESET/R shift between OFF/AUTO OFF/ON/AUTO ON modes confirm the current setting start the countdown function reset the timer and clear all data previously setting * For the first use please press the RESET button key! Specifications of the timer: + It is provided with a buffer battery + Daily and weekly programmable + In a week the timer can be programmed for 16 different start-up and start-off (8 start-up and 8 start-off). 1. Setting the clock 1.1 Press key at clock display, CLOCK will display on upper right corner. 1.2 Press key, MO will flash and start to set current time, use +/- key to adjust right weekday or weekend. 1.3 Press key to confirm and hour will flash, use +/- to adjust hour. Make sure AM/PM is correctly set. 1.4 Press key to confirm and minute now flashes, use +/- key to adjust minute. 1.5 Press key to confirm. 2. Setting the programs 2.1 Press key at clock display till CLOCK is shown on the screen. Up to 9 programs can be set for each day of the week. 2.2 Press key till the screen shows, 1ON display on the LCD. 2.3 Press key to start setting. MO, TU till SU will flash, at this stage, use +/- key to adjust day or days you want. Weekday only or. weekend only is also possible. 2.4 Press key to confirm and hour will be flashing, use +/- to adjust hour, check if AM / PM is set correctly. 2.5 Press key to confirm and minute will flash, use +/- to adjust minute. 2.6 Press key to confirm and PROG 1ON is now correctly set. 2.7 Press key and the screen will show 1OFF. 2.8 Press key to start setting PROG 1OFF. Follow the steps 4.3 to 4.6. 2.9 To have more programs set, repeat the above steps. 2.10 When finish programs setting. press key to quit or hold key for 2 or more seconds at any stage to go back to clock display format. If no key is pushed within 1 minute, the clock will be displayed. 2.11 To edit a particular program, locate it using key and press key to edit it. 2.12 To remove a particular program, locate it using key, then press key and set the day to -:-- using +/- key. 3. Operating modes of the timer Press key at clock display to select desired operating mode of the timer: + OFF: output is cut off and the programs are deactivated. + ON: output is constantly and the programs are deactivated. + AUTO OFF/AUTO ON: the timer runs in accordance with the programs previously set. The code of the ongoing program is shown in the screen. OFF indicates that there is no output and ON indicates that there is output in the outlet. MO AM View of LCD 12:00 CLOCK PROG OFF

EC-DECLARATION of CONFORMITY The distributor: Company Hagleitner Hygiene International GmbH Lunastraße 5 5700 Zell am See declares under our sole responsibility that the entire system MAGICUS Type: air fresheners Mach. Nr.: P0332 Year of manufacture: 2015 Corresponds to the following regulations and standards: - European Directives regulations: 2006/95/EC 2004/108/EC 2011/65/EU Low Voltage Directive EC Electromagnetic Compatibility (EMC) directive Restriction of certain hazardous substances in electronic equipment - Harmonised standards: EN 60335-1 Household and similar electrical appliances EN 60335-2-101 Particular requirements for vaporizers EN 55014-1 Electromagnetic compatibility The technical documentation is complete. The associated instruction manuals are enclosed in the national language of the user. Zell am See, 2.9.2015 Hans Georg Hagleitner Chief Executive Officer Hagleitner Hygiene International GmbH Art.-Nr. 303013230000 Jan. 2016/DSSP070-02