StarterKit Embedded Control SC13 + DK51. From the electronic to the automation

Transcription

1 SC13 + DK51 From the electronic to the automation No. 1 /14

2 Development board for Embedded Controller Open for add on of customer applications Ethernet-interface Serielle interface Compact flash carte slot In-and output The operating system is already installed and ready to use No. 2 /14

3 Board 8 IN / OUT with LED Compact flash card slot Ethernet Breadboard area for customer specific extensions on board RS232 EXT RS232 COM Power suppley Power fail Reset No. 3 /14

4 SC13 Processor: SC186/40 MHz 16 Bit CPU (AM186 compatible) Working Memory: (RAM) 512KB Flash Memory: (RTOS and Flash disk) 512KB Serial: 2xTTL Port (RxD, TxD, RTS, CTS with DMA) Ethernet: 10/100BaseT I/O: 14 PIO, Intel Address/Data-Bus Supply Voltage: 5.0V +/-5% Active current: 300 ma (typical) Operating temperature: (TA) 0º C to +70º C Operating system: IPC@CHIP RTOS Footprint: DIL32 Other features: TCP/IP Stack, PPP, HTTP, FTP, Telnet, POP3, SMTP, DHCP I2C Bus, SPI Bus, Watchdog 2 Timer OUT, 2 Timer IN No. 4 /14

5 SC13/RTOS No. 5 /14

6 Development Board DK 50 Embedded Controller SC13-IEC Power Supply PSE 10 Borland C CD CoDeSys Editor CD (Test-Version 4h) CableZK14 Supplementary sheet with information about internet pages (references, examples, applications...) CD Getting Started/ Documentation (DE/EN/FR) Development board for electronic and automation Microcontoller incl. 2 x RS232, 1x TCP/IP, 8 DI/DO No. 6 /14

7 Learning contents Programing in C++ Programing in IEC Develop your own PLC Automation from A to Z Development own electronic applications, connection with development board and programming Customer application Internet communication I/O-communication Seriell communication (RS232 / MODBUS) Ethernet-communication (TCP/IP) Working with Webserver No. 7 /14

8 Application Example applications (source: BA Mosbach) Keyboard via I²C Converter D/A -A/D via I²C LCD Display via I²C No. 8 /14

9 Example Use more digital Input/Output Development of an application with display, keyboard, etc (source: BA Mosbach) No. 9 /14

10 Technical data Technical data and description are available No. 10 /14

11 Example and Power-Line Reducing power consumption by intelligently controlling electrical loads using the and power-line communication. Steuerbare Webcam (only in German) Erstellen von Softwaremodulen für den am Beispiel einer über das Internet steuerbaren Webcam. Über den wird ein mit einer Kamera ausgestatteter Roboter über das Internet gesteuert No. 11 /14

12 Example Zeiterfassung mit DCF-Uhr und Chipkartenleser (only in German) Aufbau, Inbetriebnahme und Programmierung. Desweiteren ist die Erweiterung des Moduls zum Anschluss eines DCF77-Empfängers sowie die Ansteuerung einer Kontaktiereinrichtung zum lesen und schreiben von I²C Chipkarten vorgesehen. Zusätzliche Forderungen sind die Nutzung der Platine als Timeserver zur PC-Zeit-Synchronisation in einem Netzwerk und als Experimentierplatine No. 12 /14

13 Example Low Cost PI controler with the Sample for real time control applications with an A/D converter. The development board DK50, which has been extended with a 12-Bit A/D converter and a PWM output. The software PI regulator within the application uses the value provided by the A/D converter as setting parameter. The further control parameters and data are set and visualized by using the Web interface. The functionality of the sample has been proved, considering the example of a mass flow regulation in a flow channel No. 13 /14

14 Conclusion Space for Extensions Open System, Circuit diagrams avalible RS232 Signal External power supply 10/100 Mbit Ethernet 3 PIOs with LEDs 8 LEDs with Pins 26 extension pins with partly decoding A/D Bus at latches Compact Flash Simple & fast commisioning Documentation Power connection at ring plug Euro cart format ==> An extentional functional basic function ==> Enabled of development of own extensions and convert into own hardware ==> The most used communication interface ==> No problem for finding out of an power supply ==> Simple link to network and Webserver, FTP etc. are available also the interface for setup ==> Easy link for I2C and SPI ==> Easy to use I/O via Port command from program or console. To control via Webserver and the result is visible. ==> Easy link of extensions for AD-converter, PIO-module, LCD usw. ==> Buffer of bigger Web presentations. Datalogging. Reduce write cycle at internal flash of SC13 ==> Customer don t need deaper knowledge of Embedded. Provide confidence, that the development is running well ==> Enabled a savety step by step commissioning ==> Easy plug in and out for cold start. Commisioning without screw clamp ==> Availability of boxes to present a prototype. Standard format No. 14 /14