Product Catalogue. Technical PROOF. The Valve People. Specifications are subject to change and modification without notice.

Technical Product Catalogue The Valve People 1

The tradition of excellence continues For over a century, John Valves has served the needs of industrial development. MNUFCTURING PLNT ND HED OFFICE Creswick Road, BLLRT Victoria 3350 PO Box 279 Ballarat 3353 Telephone (03) 5333 0777 Fax (03) 5338 1771 Email: service@johnvalves.com.au Web: www.johnvalves.com.au Today, John products are demanded by engineers and designers for duties on projects ranging from the innovative to the essential. John Valves set the standard with products in water supply, building services, power generation, oil and gas production and refining, mining and mineral processing and petrochemical industries in ustralia and around the world. From humble beginnings in 1895, the company has grown and developed, meeting the constantly changing needs of industrial growth and winning a reputation for the quality and reliability of its products and service. John Valves present 12 hectare manufacturing plant uses high technology equipment including computer controlled machining facilities, electric induction furnaces, approved mechanical and chemical laboratories, research and development flow testing equipment. wealth of experience gained from long term association with the critical services of power generation and the hostile environment of oil and gas extraction, is being applied to products being developed in the future. John products include an extensive range of gate, globe, check, ball,balancing, butterfly, level control, air release, parallel slide valves and penstocks. John Valves is registered with the Standards ssociation of ustralia under the Supplier ssessment Scheme S/NZS ISO9001:2000 as an endorsed company working in accordance with the Quality System requirements of that standard. John Valves Certificate number is QEC 0162. This approval covers the company s quality assurance systems for the production and installation of John Valves products in the water, mining, power generation, oil, gas, defence and similar industries. The company also has specific Standards ustralia Standardsmark licences for its range of bronze gate and check valves and cast iron gate, check, sluice valves and spring hydrant. The John capability also encompasses the casting and machining of custom made components. John Valves is ustralian owned and is proud of the range of ustralian made products that it sells and services. 2

INDEX.net news For the latest information on our product range, connect to the John Valves internet page: www.johnvalves.com.au Product Catalogue Index 2-3 Product Data Sheets 4-35 Flange Tables 36-41 Pressure/Temperature Ratings 42-45 Pressure Relief Valves Discharge Capacity 46 Level Control Valves Discharge Capacity 47 Headloss Curves 48-50 Steam Tables 51-52 Pressure Conversion Table 53 Temperature Conversion Table 54 Conversion Factors 55 Valve Materials 56 Valve Installation and Operation 57 Specifications are subject to change and modification without notice. 1

PRODUCT CTLOGUE INDEX GLOBE VLVES GTE VLVES CHECK VLVES MX. WORKING MX. PRESSURE (kpa) TEMP. C C.W.P. Steam FIG. NO. MTERIL DESCRIPTION END CONNECTION SIZE RNGE mm 2100* 1400 200 1 Bronze Integral seat, screwed bonnet Screwed 8-50 5 2100* 1400 200 2 Bronze Integral seat, screwed bonnet Flanged 50-100 5 2400* 1700 207 101 Bronze Renewable disc, union bonnet Screwed 15-50 6 2100* 1700 207 102 Bronze Renewable disc, union bonnet Flanged 40-80 6 4000 1750 260 501 Bronze Stainless steel trim, union bonnet Screwed 8-80 7 3500 1900 250 502 Bronze Stainless steel trim, union bonnet Flanged 15-80 7 2100* 1000 220 201 S.G. iron Bronze trim, O.S. & Y., bolted bonnet Flanged 50-300 8 3500* 1700 425 2031 Carbon steel NKL/Stellite trim, bolted bonnet Flanged 65-200 8 6200* 3100 425 2463 Carbon steel Stainless steel trim, bolted bonnet Flanged 15-50 9 MX. WORKING PRESSURE kpac.w.p. MX. TEMP. C FIG. NO. MTERIL DESCRIPTION END CONNECTION SIZE RNGE mm 2100 99 59M Copper lloy Inside screw, screwed bonnet Screwed 15-100 10 2100 175 60M Bronze Inside screw, screwed bonnet Flanged 15-100 11 1400 65 600 S.G. iron Inside screw, bolted bonnet Flanged 50-600 13 1400 65 601 S.G. iron Outside screw, bolted bonnet Flanged 50-600 14 2100 65 600F S.G. iron Inside screw, bolted bonnet Flanged 50-300 13 PGE PGE 2100 65 601F S.G. iron Outside screw, bolted bonnet Flanged 50-300 14 2100* 120 600G S.G. iron Inside screw, bolted bonnet Rolled groove 65-150 15 2100* 120 601G S.G. iron Outside screw, bolted bonnet Rolled groove 65-150 15 2100 120 6025 S.G. iron Inside screw, bolted bonnet Shoulder ends 80-150 17 MX. WORKING MX. PRESSURE (kpa) TEMP. C C.W.P. Steam FIG. NO. MTERIL DESCRIPTION END CONNECTION SIZE RNGE mm 2100 N/ 99 4B Bronze Swing type, bronze trim Screwed 15-100 18 2100 N/ 99 4BF Bronze Swing type, bronze trim Flanged 50-100 18 4000 1750 260 521 Bronze Piston type, stainless steel trim Screwed 15-50 20 3500 1900 250 522 Bronze Piston type, stainless steel trim Flanged 50-80 20 1400 N/ 95 404 S.G. iron Swing type, bronze trim Flanged 50-600 22 2100 N/ 95 404F S.G. iron Swing type, bronze trim Flanged 50 600 22 2100 N/ 60 4205 S.G. iron Tilting disc, bronze trim Flanged 150-600 24 3500 N/ 60 4207 S.G. iron Tilting disc, bronze trim Flanged 150-600 24 1000 N/ 60 408 S.G. iron Rubber coated ball check valve Flanged 50,100,150 25 2100* N/ 95 404G S.G. iron Swing type, bronze trim Rolled groove 80-150 26 2100* N/ 95 404E S.G. iron Swing type, bronze trim Shoulder ends 100 27 PGE * Manufacture considered on request. 2

PRODUCT CTLOGUE INDEX SLUICE VLVES PRESSURE RELIEF VLVES PRLLEL SLIDE VLVES MX. WORKING PRESSURE kpa C.W.P. MX. TEMP. C FIG. NO. MTERIL DESCRIPTION END CONNECTION SIZE RNGE mm 1600 60 630 S.G. iron S2638 Class 16, resilient seat Flanged 80-300 28 1600 60 635 S.G. iron S2638 Class 16, resilient seat Spigot 100 & 150 28 1600 60 636 S.G. iron S2638 Class 16, resilient seat Polyfit socket 100 & 150 29 1600 60 637 S.G. iron S2638 Class 16, resilient seat Tyton socket 80-300 29 1400 60 694 S.G. iron S2638 Class 14, metal seat Flanged 80-600 30 1400 60 695 S.G. iron S2638 Class 14, metal seat Spigot 80-375 31 1400 60 656 S.G. iron S2638 Class 14, metal seat Polyfit socket 100-200 32 1400 60 657 S.G. iron S2638 Class 14, metal seat Tyton socket 80-300 33 1400 60 658 S.G. iron S2638 Class 14, metal seat Flanged/Polyfit 100 & 150 32 1400 60 659 S.G. iron S2638 Class 14, metal seat Flanged/Tyton 80-300 33 2100 60 698 S.G. iron S2638 Class 21, metal seat Flanged 80-600 30 3500 60 699 S.G. iron S2638 Class 35, metal seat Flanged 80-300 34 3800 60 692 S.G. iron S2638 Class 38, metal seat Flanged 80-300 34 Sluice valve configurations 35 MX. WORKING PRESSURE kpa C.W.P. MX. TEMP. C MX. WORKING MX. PRESSURE (kpa) TEMP. C C.W.P. Steam FIG. NO. FIG. NO. MTERIL 140 99 68F Bronze 280 99 68D Bronze 560 99 68B Bronze 840 99 68 Bronze 1050 99 68C Bronze 1400 99 68E Bronze MTERIL DESCRIPTION Spring loaded relief valve 70-140 kpa Spring loaded relief valve 141-280 kpa Spring loaded relief valve 281-560 kpa Spring loaded relief valve 561-840 kpa Spring loaded relief valve 840-1050 kpa Spring loaded relief valve 1051-1400 kpa DESCRIPTION END CONNECTION END CONNECTION SIZE RNGE mm SIZE RNGE mm 4800 2400 425 3032 Carbon steel Rising stem - bolted bonnet Flanged 40-300 44 PGE PGE Screwed 15-80 43 Screwed 15-80 43 Screwed 15-80 43 Screwed 15-80 43 Screwed 15-80 43 Screwed 15-80 43 PGE LEVEL CONTROL VLVES MX. WORKING PRESSURE kpa C.W.P. MX. TEMP. C FIG. NO. MTERIL DESCRIPTION END CONNECTION SIZE RNGE mm 1700 80 138 Bronze Level control (float) valve Screwed 25,40,50 45 1400 80 132 S.G. iron Level control (float) valve Flanged 80-300 45 2100 80 132F S.G. iron Lovel control (float) valve Flanged 80-300 45 Level control valves float arrangements 46 PGE * Manufacture considered on request. 3

GLOBE VLVES JOHN Fig. 1 STEM: 1400 kpa @ 200 C WTER, OIL: 2100 kpa @ 175 C Screwed female pipe thread Body: 3150 kpa Seat: 2100 kpa B open SIZE B C Wt. Carton Qty. 8 45 66 48 0.2 24 0.9 0.02 10.20 10 51 67 48 0.3 20 1.3 0.03 9.86 1 5 54 92 64 0.4 20 2.5 0.06 9.18 20 67 103 64 0.6 20 5.8 0.14 8.50 2 5 73 117 73 0.8 12 10.7 0.25 7.82 32 82 128 86 1.3 12 17.1 0.40 7.48 40 92 145 92 1.6 6 25.2 0.59 7.14 5 0 114 157 105 2.4 6 47 1.11 6.46 STEM: 1400 kpa @ 200 C WTER, OIL: 2100 kpa (to 80mm) 1700 kpa (100mm valve size) @ 175 C Flanged S2129 Table F C Body: 3150 kpa (up to 80mm),2550 kpa (100mm) Seat: 2100 kpa (up to 80mm),1700 kpa (100mm) D C E B open For water, oil and steam MNUFCTURE CONSIDERED ON REQUEST GLOBE VLVE low cost bronze globe valve with screwed bonnet and integral seat for use in general purpose application areas requiring throttling control and isolation of flow - hospital services, canteen equipment, agricultural instrumentation and general industrial applications. Seating faces of disc and body may be easily reconditioned, if necessary, after extensive use. JOHN Fig. 1 Size range: 8-50mm End Connection: Screwed female pipe thread MTERILS OF CONSTRUCTION JOHN Fig. 2 Size range: 50-100mm End Connection: Flanged S2129 Table F N.B. When used on steam service, the Fig. 1 is suitable for isolation duties only. Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Disc Gunmetal S 1565-C83600 Stem D.R. brass S 1567-486 Handwheel luminium Packing Teflon SIZE B C D E Wt 50 124 157 105 165 16 7.6 47 11.1 6.46 65 165 185 118 184 16 11.5 75 1.77 6.29 80 187 215 152 203 16 16.6 109 2.57 6.12 OPTIONL EXTRS Screw down non-return. Fig. 2: Flanges drilled to S 2129 Tables C/D, E or F, NSI or DIN. 100 203 254 178 229 19 22.0 199 4.70 5.78 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 4

For water, oil, gas and steam GLOBE VLVES JOHN Fig. 101 STEM: 1700 kpa @ 207 C WTER, OIL, GS : 2400 kpa @ 175 C Screwed female pipe thread Body: 3600 kpa Seat: 2400 kpa C B open Wt Carton SIZE B C Qty. 15 67 123 73 0.7 12 2.5 0.06 9.18 GLOBE VLVE - J DISC Bronze globe valve with union bonnet, renewable composition disc and integral seat. Suitable for isolation duties on medium/low pressure steam and hot water services, also for regulation and isolation duties on cold water, air, oil, gas and other liquids not injurious to copper alloys. pplication areas include hospital equipment, canteen appliances, heating systems and industrial processes, etc. JOHN Fig. 101 20 79 140 73 1.2 8 5.8 0.14 8.50 25 95 160 86 1.7 10 10.7 0.25 7.82 32 108 178 92 2.5 6 17.1 0.40 7.48 40 124 210 105 3.9 5 25.2 0.59 7.14 50 149 225 117 5.8 3 47 1.11 6.46 JOHN Fig. 102 STEM : 1700 kpa @ 207 C WTER, OIL, GS : 2100 kpa @ 175 C Flanged S2129 Table F Body: 3150 kpa Seat:2100 kpa B open C E D MNUFCTURE CONSIDERED ON REQUEST Size range: 15-50mm Screwed female pipe thread MTERILS OF CONSTRUCTION JOHN Fig. 102 Size range: 40-80mm Flanged S2129 Table F Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Bonnet nut Gunmetal S 1565-C83600 Disc Hard composition Disc holder Manganese bronze S 1567-686 Stem D.R. brass S 1567-486 Handwheel luminium Packing Teflon SIZE B C D E Wt 40 181 213 105 140 13 7.2 25.2 0.59 7.14 50 203 232 117 165 16 10.9 47 1.11 6.46 OPTIONL EXTRS Fig. 102: Flanges drilled to S 2129 Tables C/D, E or F NSI or DIN. 65 229 267 152 184 16 16.1 75 1.77 6.29 80 254 293 178 203 16 22.7 109 2.57 6.12 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 5

GLOBE VLVES JOHN Fig. 501 STEM: 1750 kpa @ 260 C WTER, OIL: 4,000 @ 120 C Screwed taper pipe thread Body: 6000 kpa Seat: 4000 kpa C B open SIZE B C Wt. Carton Qty. 8 63 120 73 0.6 15 0.9 0.02 10.20 10 67 120 73 0.7 12 1.3 0.03 9.86 15 74 120 73 0.8 12 2.5 0.06 9.18 For water, oil and steam VLIDUS GLOBE VLVES The JOHN range of Validus valves takes this name from the Latin: strong, powerful, robust. They feature a stainless steel disc and seat with precision lapped faces for easy in-line refurbishment, or, if necessary, replacement. Metal to metal locked up bonnet seal designed for pressure tight sealing in service and, with a set screw, easy dismantling for maintenance purposes. D.R. brass stem with accurately machined acme threads. Effective and reliable stem sealing using non-asbestos packing in a substantial stuffing box. JOHN Fig. 501 20 89 137 73 1.5 8 5.8 0.14 8.50 25 102 158 86 1.9 10 10.7 0.25 7.82 32 116 175 92 2.6 6 17.1 0.40 7.48 40 132 204 105 3.9 5 25.2 0.59 7.14 50 160 231 118 5.8 3 47 1.11 6.46 65 184 260 152 9.8 ---- 75 1.77 6.29 80 218 292 178 15.5 ---- 109 2.57 6.12 JOHN Fig. 502 STEM : 1900 kpa @ 250 C WTER, OIL, GS : 3500 kpa @ 175 C Flanged S2129 Table H Body: 5250 kpa Seat: 3500 kpa B open C E D Size range: 8-80mm Screwed taper pipe thread. MTERILS OF CONSTRUCTION JOHN Fig. 502 Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Bonnet nut Gunmetal S 1565-C83600 Disc Stainless steel S 2837-431 Body seat ring Stainless steel S 2837-431 Stem D.R. brass S 1567-486 Handwheel luminium Packing Teflon SIZE B C D E Wt. 15 95 120 73 115 10 3.0 2.5 0.06 9.18 20 114 137 73 115 10 3.4 5.8 0.14 8.50 25 130 158 86 120 11 4.4 10.7 0.25 7.82 32 140 175 92 135 11 7.0 17.1 0.40 7.48 40 181 204 105 140 13 7.6 25.2 0.59 7.14 50 203 231 118 165 13 10.6 47 1.11 6.46 65 229 260 152 185 14 16.3 75 1.77 6.29 80 254 292 178 205 16 23.8 109 2.57 6.12 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 6 OPTIONL EXTRS Screw down non-return. Fig. 502: Flanges drilled to S 2129 Tables C/D, E, F or H, NSI or DIN.

JOHN Fig. 201 STEM: 1000 kpa @ 220 C WTER, OIL, GS: 2100 kpa @ 120 C Flanged to S 2129 Table F Body: 3150 kpa Seat: 2100 kpa D E C Wt. SIZE B C D E 50 216 333 178 165 19 22 47 1.11 6.46 65 235 359 178 184 19 27 75 1.77 6.29 80 267 410 203 203 19 42 109 2.57 6.12 For water, oil, gas and steam 100 330 476 229 229 25 64 199 4.70 5.78 150 432 581 356 305 29 135 477 11.26 5.10 200 525 737 500 363 32 220 862 20.30 4.93 250 635 864 560 432 36 360 1370 32.30 4.76 300 813 930 760 490 38 400 2048 48.30 4.42 JOHN Fig. 2031 STEM: 1700 kpa @ 425 C WTER, OIL, GS: 3500 kpa @120 C Flanged S2129 Table H Body: 5250 kpa Seat: 3500 kpa D E C Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. B SIZE B C D E Wt. 65 235 359 178 184 19 29.1 75 1.77 6.29 80 267 410 203 203 22 45.9 109 2.57 6.12 100 330 476 229 229 25 69.0 199 4.70 5.78 150 432 581 356 305 29 139.8 477 11.26 5.10 200 483 610 406 337 32 178.0 862 20.34 4.93 B 7 GLOBE VLVES MNUFCTURE CONSIDERED ON REQUEST CST IRON ND CST STEEL GLOBE VLVES The JOHN cast iron globe valves are of simple, robust design and cover most applications within their specified working conditions. They are particularly suitable for steam installations, feed water services and on air services where the lower operating temperatures allow high pressures to be used. JOHN Fig. 201 Size range: 50-300mm End Connection: Flanged to S 2129 Table F MTERILS OF CONSTRUCTION - Fig. 201 JOHN Fig. 2031 Body Cast iron S 1830-T220 Bonnet Cast iron S 1830-T220 Disc Gunmetal S 1565-C83600 Body seat ring Gunmetal S 1565-C83600 Stem D.R. brass S 1567-486 Gasket Non asbestos Handwheel Cast iron Packing Non asbestos MTERILS OF CONSTRUCTION - Fig. 2031 Body Cast steel STM 216 WCB Bonnet Cast steel STM 216 WCB Disc Carbon steel stellited Body seat ring N.K.L. alloy G Stem Stainless steel S 2837-431 Gasket Non asbestos Handwheel Cast iron S 1830-T220 Packing Non asbestos OPTIONL EXTRS Flanges drilled to S 2129 Tables C/D, E, F or H, NSI or DIN. Gearbox, electric, pneumatic or hydraulic actuation. Position indication. Water sealed gland. Fig. 2031: Buttweld connection. Stellite trim. lso available in a large range of high pressure/high temperature designs up to and including NSI 2500 special class.

For water, oil, gas and steam GLOBE VLVES MNUFCTURE CONSIDERED ON REQUEST JOHN Fig. 2463 STEM: 3100 kpa @ 425 C WTER, OIL, GS : 6200 kpa @ 232 C Flanged to S 2129 Table K Body: 9300 kpa Seat: 6200 kpa D B E STEEL GLOBE VLVE The JOHN Fig. 2463, outside screw, globe valves are designed for use on super heated steam and for industrial applications. They are supplied as standard with flat-faced stainless steel valve disc and body seat, both components being precision ground and lapped to ensure maximum sealing under the high operating conditions for which the valve is designed. This valve is also available with needle trim for fine regulating flow control. Size range: 15-50mm Flanged to S 2129 Table K JOHN Fig. 2463 C SIZE B C D E Wt 15 143 165 105 115 19 5.3 2.5 0.06 9.18 20 159 197 105 115 19 5.7 5.8 0.14 8.50 25 178 232 121 125 22 9.8 10.7 0.25 7.82 32 191 245 121 135 22 11.1 17.1 0.40 7.48 40 216 265 140 150 25 16.3 25.2 0.59 7.14 50 241 290 152 165 25 23.0 47 1.11 6.46 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. MTERILS OF CONSTRUCTION Body Carbon steel STM 181 F22/STM 216WCB Bonnet Carbon steel STM 181 F22/STM 216WCB Disc Stainless steel S 2837-410 Stem Stainless steel S 2837-431 Body seat ring Stainless steel S 2837-431 Gasket Graphite Handwheel S.G. iron Packing Non asbestos OPTIONL EXTRS Flanges drilled to S 2129 Tables C/D, E, F, H, J or K, NSI or DIN. Buttweld ends. Electric, pneumatic or hydraulic actuation. Position indication. Needle trim. Stellite trim. lso available in a large range of high pressure/high temperature designs up to and including NSI 2500 special class. 8

For water, oil & gas. GTE VLVES JOHN Fig. 59M WTER,OIL, GS: 2100 kpa @ 99 C Screwed female pipe thread Body: 3150 kpa Seat: 2310 kpa Tested in accordance with ISO 5208 B C S1628 GTE VLVE - SCREWED ENDS The JOHN Fig. 59M has an inside screw non-rising stem. Valves in all sizes are dezincification resistant. The valve is suitable for applications in mechanical services, domestic water systems, fire protection, hospital equipment and general industrial services within the pressure limitations. The Fig. 59M is not recommended for throttling and should be used in the fully open or fully closed position. Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. Wt. Carton SIZE B C Qty. 65 110 232 117 5.1 2 491 11.6 0.15 80 125 267 140 6.9 2 719 17.0 0.14 100 150 308 203 14.0 ---- 1302 30.7 0.14 JOHN Fig. 59M Size range: 65-100mm Screwed female pipe thread. Product approvals: ustralian Standard S 1628 Lic. No. 289 MTERILS OF CONSTRUCTION: Size range 65-100mm Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Wedge Gunmetal S 1565-C83600 Stem D.R. brass S 1567-486 Handwheel luminium (65 and 80mm) Cast iron (100 mm) Packing Graphite S1628 Lic.No.289 OPTIONL EXTRS Cast iron handwheel. Key cap operation. Cast iron T bar. BURIED SERVICE Heavy duty cast iron handwheel or T bar is highly recommended to be fitted for buried or below ground applications. 9

For water, oil and gas. GTE VLVES JOHN Fig. 60M WTER, OIL, GS : 2100 kpa @ 99 C Flanged S2129 Table F Body:3150 kpa Seat: 2310 kpa Tested in accordance with ISO 5208 B C S1628 GTE VLVES - FLNGED ENDS The JOHN fig. 60M has a non-rising stem along with a screwed bonnet design, ideally suited for all mechanical, fire service and plumbing installations, industrial, general water supply and domestic hot and cold services. The Fig. 60M is not recommended for throttling and should be used in the fully open or fully closed position. Size range: 15-100mm Flanged S2129 Table F JOHN Fig. 60M Wt. SIZE B C D E 15 70 103 64 114 8 1.8 16 0.38 0.22 20 73 110 64 121 8 2.0 38 0.90 0.20 25 89 123 73 120 10 3.0 71 1.68 0.18 32 102 146 86 135 10 3.6 112 2.64 0.18 40 118 165 92 140 11 5.2 163 3.85 0.17 50 143 193 105 165 11 7.6 309 7.29 0.15 65 156 232 117 185 13.5 8.7 491 11.6 0.15 80 172 267 140 205 14.5 15.7 719 17.0 0.14 100 210 310 200 230 17 24.5 1302 30.7 0.14 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. E D Product approvals: ustralian Standard S 1628 Lic. No. 289 MTERILS OF CONSTRUCTION S1628 Lic.No. 289 Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Wedge Gunmetal S 1565-C83600 Stem D.R. brass S 1567-486 Handwheel luminium (15 to 80mm) Cast iron (100 mm) Packing Graphite OPTIONL EXTRS Cast iron handwheel. Key cap operation. Cast iron T bar. Open/shut indicator. Transformer oil trim. Flanges drilled to S2129 Tables C/D, E or F, NSI or DIN. 10

For water, oil & gas. GTE VLVES SUPPLY CONSIDERED ON REQUEST JOHN Fig. 59 WTER,OIL, GS: 8mm & 10mm 3500 kpa @ 175 C 15mm to 50mm 3500 kpa @ 200 C Screwed female pipe thread Body: 5250 kpa Seat: 3850 kpa B BRONZE GTE VLVE Gate valves are very widely used where uninterrupted full-bore flow is required. They are ideally suited for hydraulic and similar services. The JOHN Fig. 59 bronze gate valves features all dezincification resistant materials including the gland, matching piece and inside screw non-rising stem. They are not recommended for throttling and should be used either fully open or fully closed. Size range: 8-50mm Screwed female pipe thread. JOHN Fig. 59 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. C SIZE B C Wt. Carton Qty. 8 49 95 48 0.4 24 6 0.14 0.24 10 49 95 48 0.4 24 9 0.21 0.23 15 58 77 60 0.4 20 16 0.38 0.22 20 63 95 70 0.5 25 38 0.90 0.20 25 73 104 70 0.8 20 71 1.68 0.18 32 83 122 80 1.1 15 112 2.64 0.18 40 86 138 90 1.5 15 163 3.85 0.17 50 99 160 100 2.3 10 309 7.29 0.15 MTERILS OF CONSTRUCTION: Size range 8-50mm Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Wedge Gunmetal S 1565-C83600 Stem D.R. brass S 1567-486 Handwheel luminium Packing Teflon OPTIONL EXTRS Cast iron handwheel. Cast iron T bar. 11

For water, oil and gas. GTE VLVES CST IRON GTE VLVES JOHN Fig. 600 WTER, OIL, GS : Up to 300mm:1400 kpa @ 65 C Over 300mm: 1200 kpa @ 65 C Flanged S2129 Table E Up to 300mm: Body 2800 kpa Seat 1400kPa Over 300mm: Body 1800 kpa Seat 1200 kpa B E The JOHN Fig. 600 (inside screw - non-rising stem) is used mainly for water control but are also suitable for general use on services such as oil, gas and many other fluids. They are of the solid wedge type with matching tapered body seats. Size range: 50-80mm, 200mm, 250mm, 300mm. Flanged S2129 Table E Size range: 100-150mm Flanged S2129 Table F JOHN Fig. 600 C SIZE B C D E Wt. 50 175 276 152 150 19.1 15 309 7.29 0.15 65 190 330 178 165 19.1 22 491 11.59 0.15 80 200 333 210 185 19.1 25 719 17.0 0.14 100 229 383 210 230 22.2 33 1302 30.7 0.14 150 268 505 254 305 25.4 64 3107 73.3 0.12 200 292 663 356 335 25.4 118 5643 133 0.12 250 330 787 406 405 25.4 205 9227 218 0.11 300 356 864 406 455 28.6 251 13616 321 0.10 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. D Product approvals: ustralian Standard S 3579 Lic. No. 1127 MTERILS OF CONSTRUCTION S3579 Lic. No. 1127 Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge S.G. iron S 1831-400/15 Seats Gunmetal S 1565-C83600 Stem Stainless Steel S 2837-431 Handwheel Cast iron S 1830-T220 OPTIONL EXTRS Open/shut indicator. Chain wheel. Remote position indication. Gear, electric, pneumatic, hydraulic actuation. Flanges drilled to S2129 Table C/D, E, NSI or DIN. Class 21 pressure rating - Fig. 600F Dimensions as for Fig. 600 but Table F flanges. 100mm and 150mm manufactured w/- Table F flanges. 12

For water, oil and gas. GTE VLVES CST IRON GTE VLVES JOHN Fig. 601 WTER, OIL, GS : Up to 300mm: 1400 kpa @ 65 C Over 300mm: 1200 kpa @ 65 C Flanged S2129 Table E Up to 300mm: Body: 2800 kpa Seat: 1400 kpa Over 300mm: Body: 1800 kpa Seat: 1200 kpa B E The JOHN Fig. 601 (outside screw - rising stem) is used mainly for water control but are also suitable for general use on services such as oil, gas and many other fluids. They are of the solid wedge type with matching tapered body seats. Size range: 50-80mm, 200mm, 250mm, 300mm Flanged S2129 Table E Size range: 100-150mm Flanged S2129 Table F JOHN Fig. 601 C Wt. SIZE B C D E 50 178 350 203 150 19.1 18 309 7.29 0.15 65 190 360 229 165 19.1 24 491 11.59 0.15 80 203 435 229 185 19.1 29 719 17.0 0.14 100 230 440 225 230 22.2 38 1302 30.7 0.14 150 268 650 305 305 25.4 69 3107 73.3 0.12 200 292 780 356 335 25.4 132 5643 133 0.12 250 330 930 457 405 25.4 207 9227 218 0.11 300 356 1090 558 455 29.0 270 13616 321 0.10 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. D Product approvals: ustralian Standard S 3579 Lic. No. 1127 MTERILS OF CONSTRUCTION S3579 Lic. No. 1127 Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge S.G. iron S 1831-400/15 Seats Gunmetal S 1565-C83600 Stem Stainless Steel S 2837-431 Handwheel Cast iron S 1830-T220 OPTIONL EXTRS Open/shut indicator. Chain wheel. Remote position indication. Gear, electric, pneumatic, hydraulic actuation. Flanges drilled to S2129 Table C/D, E, NSI or DIN. Class 21 pressure rating - Fig. 601F Dimensions as for Fig. 601 but Table F flanges. 100mm and 150mm manufactured w/- Table F flanges. 13

GTE VLVES For water. MNUFCTURE CONSIDERED ON REQUEST JOHN Fig. 600G WTER: 2100 kpa @ 120 C Rolled groove ends Body: 3150 kpa Seat: 2100 kpa D E C GTE VLVES - ROLLED GROOVE ENDS This range of JOHN valves has been designed to be compatible with grooved end pipe and relevant grooved end fittings. The valve body sections are generous allowing for corrosive action to take place without impairing the pressure capabilities of the valve. The Fig. 600G has an inside screw non-rising stem while the Fig. 601G has an outside screw rising stem. JOHN Fig. 600G SIZE B C D E Wt. 65 190 330 178 76.2 16 16 491 11.6 0.15 80 203 210 203 88.9 16 19 719 17.0 0.14 100 230 210 203 114.3 16 22 1302 30.7 0.13 150 268 254 241 165.1 16 48 3107 73.3 0.12 JOHN Fig. 601G WTER: 2100 kpa @ 120 C Rolled groove ends Body:3150 kpa Seat: 2100 kpa D E C B B Size range: 80-150mm Rolled groove ends. S3579 Lic. No. 1127 Product approvals: ustralian Standard S 3579 Lic. No. 1127 MTERILS OF CONSTRUCTION JOHN Fig. 601G Size range: 80-150mm Rolled groove ends. Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Seats Gunmetal S 1565-C83600 Stem Stainless Steel S 2837-431 Handwheel Cast iron S 1830-T220 S3579 Lic. No. 1127 SIZE B C D E Wt. 65 190 360 229 76.2 16 19 491 11.6 0.15 80 203 435 229 88.9 16 23 719 17.0 0.14 100 230 440 225 114.3 16 27 1302 30.7 0.13 OPTIONL EXTRS Local or remote position indication. 150 268 650 305 165.1 16 53 3107 73.3 0.12 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 14

GTE VLVES For water. JOHN Fig. 6025 WTER: 2100 kpa @ 120 C Shoulder ends Body: 3150 kpa Seat: 2100 kpa D SIZE B C D C INSIDE SCREW GTE VLVE Shoulder Ends The valve is manufactured in spheroidal graphite iron with bronze seat and wedge rings and has an inside screw non-rising stem. The end connections are manufactured to be compatible with shoulder end pipe and relevant shoulder end fittings. Size range: 80, 100, 150mm Shoulder ends. JOHN Fig. 6025 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. B Wt. 80 203 333 203 96.8 19 719 17.0 0.14 100 230 390 203 122.2 32 1302 30.7 0.13 150 270 508 241 175.1 50 3107 73.3 0.12 Product approvals: ustralian Standard S3579 Lic. No. 1127 MTERILS OF CONSTRUCTION S3579 Lic. No. 1127 Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge Gunmetal S 1565-C83600 Stem Stainless Steel S 2837-431 Handwheel Cast iron S 1830-T220 OPTIONL EXTRS Local or remote position indication. 15

For water, oil, gas. CHECK VLVES JOHN Fig. 4B WTER, OIL, GS: 2100 kpa @ 99 C Screwed female pipe thread Body 3150 kpa Seat 2100 kpa Tested in accordance with ISO5208 B SWING CHECK VLVES TO S1628 The JOHN Fig. 4B and 4BF bronze swing check valve fully conforms to ustralian Standard S1628 and also has SSL approval. This product has been designed for non-return duties in either horizontal or vertical pipelines conveying water or other fluids not harmful to copper alloys. Suitable for applications in mechanical services, domestic water systems, fire protection, hospital equipment and general industry services within the pressure limitations. JOHN Fig. 4B JOHN Fig. 4BF JOHN Fig. 4BF WTER, OIL, GS: 2100 kpa @ 99 C Flanged to S2129 Table F Body 3150 kpa Seat 2310 kpa B Unit Carton SIZE B Weight Qty. 15 64 33 0.4 20 6.4 0.15 1.35 20 76 44 0.6 20 15 0.35 1.25 25 92 52 0.9 12 30 0.71 1.15 32 121 70 1.7 8 45 1.06 1.10 40 127 76 2.3 6 66 1.56 1.05 50 140 86 3.2 4 123 2.90 0.95 65 187 114 5.8 4 194 4.58 0.93 80 210 124 8.1 ---- 284 6.70 0.90 100 254 149 14.6 ---- 519 12.25 0.85 C S1628 Lic. No. 289 Size range: 15-100 mm Screwed female pipe thread. Product approvals: ustralian Standard S1628 Lic. No 289 MTERILS OF CONSTRUCTION Size range: 50-100 mm Flanged to S2129 Table F Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Disc Gunmetal S 1565-C83600 Hinge pin & nut D.R. brass S 1567-486 Toggle Gunmetal S 1565-C83600 Gasket Red fibre SIZE B C Unit Weight 50 165 165 11 9.4 123 2.90 0.95 65 190 185 13 14.0 194 4.58 0.93 80 216 205 14.5 15.0 284 6.70 0.90 100 254 230 17.5 23.6 519 12.25 0.85 OPTIONL EXTRS Fig. 4BF: Flanges drilled to S 2129 Tables C/D, E, or F, NSI or DIN. Cv = Flow Coefficient US gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance coefficient. Dimensions in mm. Weight in Kg. 16

For water, oil and steam CHECK VLVES JOHN Fig. 521 STEM: 1750 kpa @ 260 C WTER, OIL: 4000 kpa @ 120 C Screwed taper pipe thread Body: 6000 kpa Seat: 4000 kpa. B.. Wt Carton SIZE B Qty. 15 74 42 0.5 20 1.9 0.05 16.2 PISTON CHECK VLVES range of robust bronze piston check valves, featuring stainless steel disc and seat with precision lapped flat faces for easy in-line refurbishment or, if necessary, replacement. Metal to metal, locked up bonnet seal designed for pressure tight sealing in service. The union nut bonnet connection allows easy dismantling for maintenance purposes. JOHN Fig. 521 20 89 48 0.8 20 4.3 0.10 15.0 25 102 54 1.2 12 8.0 0.19 13.8 32 116 64 1.9 8 12.9 0.30 13.2 40 132 70 2.7 5 19.0 0.45 12.6 50 160 90 4.9 2 35 0.83 11.4 JOHN Fig. 522 STEM : 1900 kpa @ 250 C WTER, OIL, GS : 3500 kpa @ 175 C Flanged S2129 Table H Body: 5250 kpa Seat: 3500 kpa. SIZE D E E.. Wt. D. Size range: 15-50mm Screwed taper pipe thread. MTERILS OF CONSTRUCTION JOHN Fig. 522 Body Gunmetal S 1565-C83600 Bonnet Gunmetal S 1565-C83600 Bonnet nut Gunmetal S 1565-C83600 Disc Stainless steel S 2837-431 Body seat ring Stainless steel S 2837-431 OPTIONL EXTRS Fig. 522: Flanges drilled to S 2129 Tables C/D, E, F or H, NSI or DIN. 50 203 165 13 11.0 35 0.83 11.4 65 229 185 14 15.1 56 1.32 11.1 80 254 205 16 21.4 82 1.94 10.8 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 17

For water, oil & gas. CHECK VLVES CST IRON SWING CHECK VLVE JOHN Fig. 404 The JOHN cast iron swing check valves are designed to give genuine full bore flow on lines carrying liquids which are non-injurious to the specified materials. They operate equally well in either horizontal or vertical installations. In service, the valve disc swings away from the seat on a hinge and returns quickly and accurately to the closed position immediately flow ceases or attempts to reverse. WTER, OIL, GS: 1400 kpa @ 95 C JOHN Fig. 404 Flanged to S2129 Table E Body: 2800 kpa Seat: 1400 kpa D C B SIZE B C D E Wt. 50 240 133 150 19.1 120 13 123 2.9 0.95 65 260 140 165 19.1 130 18 194 4.6 0.93 80 260 159 185 19.1 145 25 284 6.7 0.90 100 330 190 230 22.2 166 38 519 12.3 0.85 150 410 241 305 25.4 210 74 1243 29.3 0.75 200 540 306 335 25.4 246 130 2240 52.9 0.73 225 610 335 370 25.4 275 165 2855 67.4 0.72 250 640 381 405 25.4 290 188 3574 84.3 0.70 300 700 432 455 29.0 385 305 5221 123 0.68 350 826 476 525 32.0 490 680 7269 172 0.65 375 820 476 550 32.0 490 680 8344 197 0.65 400 920 476 580 32.0 490 680 11776 278 0.65 450 970 570 640 35.0 550 900 12205 288 0.63 500 1070 570 705 38.0 550 1020 15440 364 0.60 600 1220 816 850 45.0 815 1660 22234 525 0.60 Dimension E only applies when valves are fitted with extended hinge pin. Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. E Size range: 50-80mm, 200-600mm Flanged to S2129 Table E. Size range: 100-150mm Flanged to S2129 Table F. Product approvals: ustralian Standard S3578 Lic. No. 1126 MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 Cover S.G. iron S 1831-400/15 Disc S.G. iron S 1831-400/15 Seat Gunmetal S 1565-C83600 Hinge pin Stainless Steel S 2837-316 S3578 Lic. No. 1126 diameters from the pump. an extended hinge pin. OPTIONL EXTRS Extended hinge pin. Counter weight. Open/shut indicator. Remote position indication. No-flow limit switch. Fusion bonded epoxy coating. Special paint finish. Flanges drilled to S2129 Table C/D or E, NSI or DIN. Class 21 pressure rating - Fig. 404F Dimensions as for Fig. 404 but Table F flange. 100mm & 150mm manufactured w/- Table F flanges. 18

CHECK VLVES For water. JOHN Fig. 4205 WTER: 2100 kpa @ 60 C Flanged S2129 Table F Body: 3150 kpa Seat: 2100 kpa C B TILTING DISC CHECK VLVE The JOHN wafer type tilting disc check valve, Fig. 4205 is an economical alternative to the conventional type tilting disc valve. The overall length of the body has been reduced to the extent that in the fully open position, the disc extends into the pipeline. This considerable reduction in size and weight greatly facilitates installation and reduces installation costs. The disc swings on large diameter hinge pins and a high degree of pressure tightness is assured by the slight clearance on the pivots permitting the disc, when closed, to be completely unsupported by other than the seating face. Size range: 100-600mm Flanged S2129 Table F JOHN Fig. 4205 SIZE B C D Wt. 100 90 215 22 115 20 335 7.9 2.04 150 110 305 25 205 27 802 18.9 1.80 200 130 370 29 250 41 1476 34.8 1.68 250 170 430 29 260 59 2664 62.9 1.26 300 200 490 32 310 86 3898 92.0 1.22 350 228 550 35 330 131 5465 129 1.15 375 228 580 35 400 145 6565 155 1.05 400 241 610 35 400 167 8068 190 0.90 450 254 675 38 400 213 11186 264 0.75 500 280 735 41 400 260 14095 332 0.72 600 330 850 44 530 424 20733 489 0.69 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. D MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 Disc (up to 300) Gunmetal S 1565-C83600 Disc (above 300) S.G. iron S 1831-400/15 Disc ring Gunmetal S 1565-C83600 Body seat ring Gunmetal S 1565-C83600 Hinge pin Stainless steel S 2837-431 Hinge pin seal Luprene Hinge pin bush Lubron diameters from the pump. hinge pins. OPTIONL EXTRS Counter weight. Open/shut indicator. Remote position indication. No-flow limit switch. Fusion bonded epoxy coating. Special paint finish. Flanges drilled to S2129 Table C/D, E, F, NSI or DIN. Class 35 pressure rating - Fig. 4207 Dimensions as for Fig. 4205 but Table H flanges. 19

For sewerage & water. CHECK VLVES JOHN Fig. 408 WTER: 1000 kpa @ 60 C Flanged to S2129 Table E Body: 1500 kpa Seat: 1000 kpa C D CST IRON BLL CHECK VLVE The JOHN cast iron ball check valve features a non-clog design, minimum maintenance and trouble-free performance in the horizontal or vertical position. When flow is stopped the back pressure forces the ball into a positive shut off position. The design characteristics of the Fig. 408 keeps the ball completely out of the flow when open, ensuring a free flow with less friction loss than conventional designs. The valve gives positive seating without the use of springs or other mechanical devices. This product is specially suited for sewerage applications but is equally suited for general water control. Size range: 50-150mm Flanged to S2129 Table E. JOHN Fig. 408 SIZE B C D Wt. 100 380 216 215 22 35 150 508 294 280 25 81 Dimensions in mm. Weights in Kg. B MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 Cover S.G. iron S 1831-400/15 Ball Rubber coated aluminium OPTIONL EXTRS Fusion bonded epoxy coating. Special paint finish. 20

CHECK VLVES For water. MNUFCTURE CONSIDERED ON REQUEST JOHN Fig. 404G WTER: 2100 kpa @ 95 C Rolled groove ends Body: 3150 kpa Seat: 2100 kpa C D SWING CHECK VLVES - ROLLED GROOVE ENDS This range of JOHN valves has been designed to be compatible with grooved end pipe and relevant grooved end fittings. The valve body sections are generous allowing for corrosive action to take place without impairing the pressure capabilities of the valve. Size range: 80-150mm Rolled groove ends JOHN Fig. 404G SIZE B C D Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. B Wt. 80 260 153 88.9 16 14 284 6.7 0.90 100 350 170 114.3 16 22 519 12.3 0.85 150 420 254 165.1 16 49 1243 29.3 0.75 Product approvals: ustralian Standard S 3578 Lic. No. 1126 MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 Cover S.G. iron S 1831-400/15 Disc Gunmetal S 1565-C83600 Seat Gunmetal S 1565-C83600 S3578 Lic. No. 1126 OPTIONL EXTRS Local or remote position indication. Counter weight. 21

CHECK VLVES For water. MNUFCTURE CONSIDERED ON REQUEST JOHN Fig. 404E WTER: 2100 kpa @ 95 C Shoulder ends Body: 3150 kpa Seat: 2100 kpa C SIZE B C SWING CHECK VLVE - SHOULDER ENDS The valve is manufactured in spheroidal graphite iron with bronze disc and body seat and is designed to give full bore flow on lines carrying liquids which are non-injurious to specified materials and can be installed in either horizontal or vertical installations. The end connections are manufactured to be compatable with rolled groove end pipe and relevant rolled groove end fittings. Size range: 100mm Shoulder ends. JOHN Fig. 404E Wt. Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. B 100 330 190 122.2 38 519 12.25 0.85 Product approvals: ustralian Standard S3578 Lic. No. 1126 MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 Cover S.G. iron S 1831-400/15 Disc Gunmetal S 1565-C83600 Seat Gunmetal S 1565-C83600 OPTIONL EXTRS Local or remote position indication. Counter weight. 22

For water and sewerage. SLUICE VLVES JOHN Fig. 630 WTER: 1600 kpa @ 60 C Flanged to S4087 Class 16 Body: 2400 kpa Seat: 1600 kpa RESILIENT SETED SLUICE VLVE This range of fusion bonded epoxy (FBE) coated SG iron sluice valves are designed and manufactured primarily for the water industry. ll materials used in the construction of these StandardsMark Products comply with the requirements of S2638. Besides effectively controlling flow, the design is aimed at the elimination of external corrosion due to ground water and and internal tuberculation-free environment of all wetted surface including the wedge. vailable as either anti-clockwise closing or clockwise closing. JOHN Fig. 635 WTER: 1600 kpa @ 60 C Spigot ends Body: 2400 kpa Seat: 1600 kpa C C SIZE B C D Wt. Cv Kv K 80 203 380 185 21 22 719 17. 0 0.14 100 229 380 215 23 24 1302 30. 7 0.14 150 267 510 280 26 63 3107 73. 3 0.12 200 292 520 335 26 80 5643 133 0.12 225 305 620 370 26 90 5643 133 0.12 250 330 750 405 27 125 9227 218 0.11 300 356 825 455 34 168 13616 321 0.10 B D B JOHN Fig. 630 Size range: 80-300mm Flanged to S4087 Class 16. S2638 Lic. No. 1125 Product approvals: ustralian Standard S2638 Lic. No. 1125 MTERILS OF CONSTRUCTION JOHN Fig. 635 Size range: 100 & 150mm Spigot ends Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge Gunmetal/ S 1565- C83600 rubber coated EPDM Stem Stainless steel S 2837-431 Key cap S.G. iron S 1831-400/15 S2638 Lic. No. 1125 SIZE B C Wt. Cv Kv 100 305 330 122 19 1302 30. 7 0.14 150 340 510 176 55 3107 73. 3 0.12 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. K OPTIONL EXTRS Cast iron handwheel. Gearbox, electric, pneumatic or hydraulic actuation. Manufactured to various Water uthority specifications. Fig. 630: Flanges drilled to S2129 Tables C/D or E, NSI or DIN. Specify Direction of Closing represents anticlockwise closing C represents clockwise closing 23

For water and sewerage. SLUICE VLVES JOHN Fig. 636 WTER: 1600 kpa @ 60 C Polyfit socket Body: 2400 kpa Seat: 1600 kpa C SIZE B C Wt. Cv Kv K 80 300 380 140 20 719 17. 0 0.14 RESILIENT SETED SLUICE VLVE This range of fusion bonded epoxy (FBE) coated SG iron sluice valves are designed and manufactured primarily for the water industry. ll materials used in the construction of these StandardsMark Products comply with the requirements of S2638. Besides effectively controlling flow, the design is aimed at the elimination of external corrosion due to ground water and and internal tuberculation-free environment of all wetted surface including the wedge. vailable as either anti-clockwise closing or clockwise closing. JOHN Fig. 636 100 350 380 166 26 1302 30. 7 0.14 150 360 510 225 60 3107 73. 3 0.12 200 340 620 282 75 5643 133 0.12 225 440 620 309 85 5643 133 0.12 250 410 750 366 145 9227 218 0.11 300 490 825 410 192 13616 321 0.10 JOHN Fig. 637 WTER: 1600 kpa @ 60 C Tyton socket Body: 2400 kpa Seat: 1600 kpa B C B Size range: 100 & 300mm Polyfit socket S2638 Lic. No. 1125 Product approvals: ustralian Standard S2638 Lic. No. 1125 MTERILS OF CONSTRUCTION JOHN Fig. 637 Size range: 80-300mm Tyton socket Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge Gunmetal/ S 1565- C83600 rubber coated EPDM Stem Stainless steel S 2837-431 Key cap S.G. iron S 1831-400/15 S2638 Lic. No. 1125 SIZE B C Wt. Cv Kv 80 300 380 140 20 719 17. 0 0.14 100 350 380 166 26 1302 30. 7 0.14 150 360 510 225 60 3107 73. 3 0.12 200 340 620 282 75 5643 133 0.12 225 440 620 309 85 5643 133 0.12 250 410 750 366 145 9227 218 0.11 300 490 825 410 192 13616 321 0.10 K OPTIONL EXTRS Cast iron handwheel. Gearbox, electric, pneumatic or hydraulic actuation. Manufactured to various Water uthority specifications. Specify Direction of Closing represents anticlockwise closing C represents clockwise closing Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 24

SLUICE VLVES JOHN Fig. 694 WTER: 1600 kpa @ 60 C Flanged to S2129 Table E Body: 2400 kpa Seat: 1600 kpa SIZE B C D Wt. 80 230 410 185 19 32 719 17.0 0.14 100 255 475 215 22 48 1302 30.7 0.14 150 280 534 280 22 90 3107 73.3 0.12 200 320 760 335 25 160 5643 133 0.12 225 330 765 370 25 210 7302 172 0.11 250 355 820 405 25 260 9227 218 0.11 300 380 880 455 29 340 13616 321 0.10 350 445 1070 525 32 480 18532 437 0.10 375 455 1070 550 32 500 21274 502 0.10 400 610 1175 580 32 564 24205 571 0.10 450 495 1175 640 35 890 31431 742 0.09 500 510 1260 705 38 1163 38803 916 0.09 600 785 1480 825 45 1930 55877 1319 0.09 For water and sewerage. FLNGED METL SETED SLUICE VLVE ll valves in this range have O ring stem seal assembly and, as StandardsMark products, have the S2638 backseating facility for easy valve maintenance. The standard finish is FBE (Fusion Bonded epoxy) coating. vailable as either anti-clockwise closing or clockwise closing. JOHN Fig. 694 JOHN Fig. 698 Size range: 80 & 600mm Flanged to S2129/S4087 Table E Product approvals: ustralian Standard S2638 Lic. No. 1125 MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 WTER: 2100 kpa @ 60 C Bonnet S.G. iron S 1831-400/15 Wedge Gunmetal S 1565-C83600 Flanged to S2129 Table F Wedge (above 150) S.G. iron S 1831-400/15 Seats Gunmetal S 1565- C83600 Stem Stainless steel S 2837-431 Body: 3150 kpa Seat: 2100 kpa Key cap S.G. iron S 1831-400/15 Wt. SIZE B C D 80 280 410 205 19 40 719 170 0.14 100 150 200 225 250 300 375 450 500 600 305 475 230 22 65 1302 30.7 0.14 330 534 305 25 95 3107 73.3 0.12 380 760 370 29 160 5643 133 0.12 405 765 405 29 210 7302 172 0.11 420 820 430 29 260 9227 218 0.11 430 880 490 32 340 13616 321 0.10 610 1070 580 35 500 21274 502 0.10 660 1175 675 38 890 31431 742 0.09 710 1260 735 41 1163 38803 916 0.09 785 1480 850 45 1930 55877 1319 0.09 S2638 Lic. No. 1125 JOHN Fig. 698 Size range: 80 & 600mm Flanged to S2129/S4087 Table F OPTIONL EXTRS Cast iron handwheel. Fusion bonded epoxy coating. Stainless steel bonnet bolting. Stainless steel stem. Gearbox, electric, pneumatic or hydraulic actuation. Special paint finish. Manufactured to various Water uthority specifications. Fig. 694: Flanges drilled to S2129 Tables C/D or E, NSI or DIN. Flanges drilled to S4087 Class 16. Fig. 698: Flanges drilled to S2129 Tables F, NSI or DIN. Specify Direction of Closing represents anticlockwise closing C represents clockwise closing Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. 25

For water and sewerage. SLUICE VLVES JOHN Fig. 695 WTER: 1600 kpa @ 60 C Spigot ends Body: 2800 kpa Seat: 1400 kpa SIZE B C 80 100 150 200 225 250 300 375 SPIGOT END METL SETED SLUICE VLVE ll valves in this range have O ring stem seal assembly and, as StandardsMark products, have the S2638 backseating facility for easy valve maintenance. The standard finish is FBE (Fusion Bonded epoxy) coating. vailable as either anti-clockwise closing or clockwise closing. Size range: 80-375mm Spigot ends Suitable for pipe conforming with S/NZS 2280 JOHN Fig. 695 Wt. 305 410 96 40 719 17.0 0.14 340 475 122 52 1302 30.7 0.14 370 534 117.3 84 3107 73.3 0.12 430 760 232.2 155 5643 133 0.12 460 765 259.1 193 7302 172 0.11 480 820 286 222 9227 218 0.11 520 880 345.4 310 13616 321 0.10 610 1070 426.2 430 21274 502 0.10 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. Product approvals: ustralian Standard S2638 Lic. No. 1125 S2638 Lic. No. 1125 MTERILS OF CONSTRUCTION Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge Gunmetal S 1565-C83600 Wedge (above 150) S.G. iron S 1831-400/15 Seats Gunmetal S 1565- C83600 Stem Stainless steel S 2837-431 Key cap S.G. iron S 1831-400/15 OPTIONL EXTRS Cast iron handwheel. Fusion bonded epoxy coating. Stainless steel bonnet bolting. Stainless steel stem. Gearbox, electric, pneumatic or hydraulic actuation. Special paint finish. Manufactured to various Water uthority specifications. Specify Direction of Closing represents anticlockwise closing C represents clockwise closing 26

For water and sewerage. SLUICE VLVES JOHN Fig. 656 WTER: 1400 kpa @ 60 C Polyfit socket Body: 2800 kpa Seat: 1400 kpa SIZE B C 100 150 200 250 300 Wt. SOCKET END METL SETED SLUICE VLVE ll valves in this range have O ring stem seal assembly and, as StandardsMark products, have the S2638 backseating facility for easy valve maintenance. The standard finish is FBE (Fusion Bonded epoxy) coating. vailable as either anti-clockwise closing or clockwise closing. JOHN Fig. 656 JOHN Fig. 658 WTER: 1400 kpa @ 60 C Flanged/Polyfit socket Body: 2800 kpa Seat: 1400 kpa 347 475 160 65 1302 30.7 0.14 388 534 219 95 3107 73.3 0.12 500 760 310 160 5643 133 0.12 468 820 367 260 9227 218 0.11 536 880 410 340 13616 321 0.10 Size range: 100-300mm Polyfit/Polyfit socket Suitable for pipe conforming with S/NZS 1477 Series 1. Product approvals: ustralian Standard S2638 Lic. No. 1125 MTERILS OF CONSTRUCTION JOHN Fig. 658 Size range: 100 & 150mm Polyfit/Polyfit socket to Table C/D or E Suitable for pipe conforming with S/NZS 1477 Series 1. Body S.G. iron S 1831-400/15 Bonnet S.G. iron S 1831-400/15 Wedge Gunmetal S 1565-C83600 Wedge (above 150) S.G. iron S 1831-400/15 Seats Gunmetal S 1565- C83600 Stem Stainless steel S 2837-431 Key cap S.G. iron S 1831-400/15 SIZE B C D E 100 150 Wt. 301 475 160 22 215 65 1302 30.7 0.14 308 534 219 22 280 95 3107 73.3 0.12 Cv = Flow Coefficient US Gal/min. to give 1 psi pressure drop. Kv = Flow Coefficient L/s to give 1 kpa pressure drop. K = Dimension less resistance Coefficient. Dimensions in mm. Weights in Kg. OPTIONL EXTRS Cast iron handwheel. Fusion bonded epoxy coating. Stainless steel bonnet bolting. Stainless steel stem. Gearbox, electric, pneumatic or hydraulic actuation. Special paint finish. Manufactured to various Water uthority specifications. Specify Direction of Closing represents anticlockwise closing C represents clockwise closing 27