Pressure sensing and control A comprehensive range of Pressure Switches, providing a range of different options for converting pressure changes into an electrical signal. The range includes electromechanical and electronic switches suitable for pneumatic and hydraulic applications. Catalog pages show comprehensive data. www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com PSC-
Fast Find Guide PROPORTIONAL PRESSURE CONTROL VALVE VP0 /" NPT 200 PSIG ( ba) VP Programmable Page PSC- D Pneumatic/Allfluid 200 PSIG ( bar) Page PSC- ELECTRONIC PRESSURE SWITCHES Page PSC- ELECTRO-MECHANICAL PRESSURE SWITCHES 8D Pneumatic Vac to PSIG 8D Hydraulic 70 to 600 PSIG Page PSC-6 Page PSC-7 PSC-2 www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com
Models Model No. Actuation Port size Flow SCFM Operating Control NPT (Nl/min) pressure (bar) signal VP00PKH00 /" 0 (00) 0 to (0) 0..0 V VP00PKH00 /" 0 (00) 0 to (0)..20 ma VP006PKH00 /" 0 (00) 0 to 90 (6) 0..0 V VP006PKH00 /" 0 (00) 0 to 90 (6)..20 ma VP002PKH00 /" 0 (00) 0 to 0 (2) 0..0 V VP002PKH00 /" 0 (00) 0 to 0 (2)..20 ma Electrical Information PROPORTIONAL PRESSURE CONTROL VALVE VP0 Series /" NPT p Electromagnetic compatibility CE marked: conforms to EC requirements EN 008-2 (99) and EN 0082-2 (99) Electrical input signal to 20 ma or 0 to 0 V factory set Electrical power input 2 V d.c. ±2% (power consumption < W) Output pressure feedback signal 0... 0 V full range Connections DIN 60 or Brad Harrison connection for feedback output 2 Closed loop air pilot operated proportional pressure control valve Adjustable for a wide range of applications Fast response Low power consumption High flow Medium: Compressed air filtered to 0 µm, non-lubricated Supply pressure: 200 psig ( bar) max. Pin configuration Ambient temperature: - to 22 F (-20 to 0 C) Thread Tube Straight 90º swivel NPT Size Fitting elbow +2 V d.c. supply 2 0 to 0 full range Control signal (+ve) Common (DC supply, signal and feedback return) Chassis (earth).28 (7).97 (0).2 (6).28 (7).0 (28) 2. (). ().8 (98).8 ().97 (2).8 (2) 2. ().89 (8).7 (9).28 (7) www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com PSC-
PROPORTIONAL PRESSURE CONTROL VALVE VP Series Programmable /" NPT Closed loop air pilot digital proportional control valve Fully programmable with on-board diagnostics Ability to set up offline Password protection option at first level functionality Instant LED warning functions Pressure output display; no gauge necessary Medium: Compressed air, filtered to 0 µm, non-lubricated Output pressure: User adjustable up to 0 bar Supply pressure: 200 psig ( bar) Ambient temperature: 2 to 20 F (- to 0 C) Consult our Technical Service for use below 6 F (+2 C). Models Model No. Actuation Port size Flow SCFM Operating pressure Control NPT (Nl/min) PSIG (bar) signal Thread Tube Straight 90º swivel NPT Size Fitting elbow 2 P A D Electrical Information VP0PKH00 /" 0 (00) 0 to (0) 0..0 V VP0PKH00 /" 0 (00) 0 to (0)..20 ma Electromagnetic compatibility CE marked: conforms to EC requirements EN 008-2 (99) and EN 0082-2 (99) Electrical input signal to 20 ma or 0 to 0 V factory set Electrical power input 2 V d.c. ±2% (power consumption < W) Output pressure feedback signal 0... 0 V full range or user-configurable switched output Connections DIN 60 or Brad Harrison connection for feedback output Pin configuration 2 +2 V d.c. supply 2 Monitor output Control signal (+ve) Common (DC supply, signal and feedback return) Chassis (earth) M 2 96 (2).8 (2).2 ().96 (2). (9).8 () 2 **.7 ().2 ().0 (28) 2.6 ()*.2 (6).97 (0) * 2.60 (66) for manifold mounting version.7 (7) ** G/ optional / NPT PSC- www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com
Electrical parameters Electrical connection: M2 x Power supply: 0... 2 V d.c. (polarity safe) digital models... 2 V d.c. (polarity safe) analog models Electrical connection M2 x PIN-No. Signal Cable color Supply voltage Brown 2 Out 2 (PNP) / analog... 20 ma White Common Blue Out (PNP) Black Earth ground Grey ELECTRONIC PRESSURE SWITCH D Series Pneumatic and Allfluid 0.7 (9).6 (9.7) M 2 0.87 (22) OUT HYS WIN OUT2 Incorporating SET 0 0. (.) 2 2.8 (7.) 0.9 () *.86 (98) Real time pressure display with backlight Compact and robust design Easy programming of set points and additional functions Transistor output signals x PNP, 2 x PNP, or x PNP + to 20 ma Electronic lock Switching status indicated by LED Standard M2x electrical connection (IP 6) For pneumatic, all fluid and hydraulic applications Medium: Filtered compressed air, lubricated or unlubricated, neutral gases Display: LCD digits illuminated, pressure unit programmable for bar, psi, mpa Mounting position: Optional Operating pressure: Vac to 20 psi (pneumatic) 0 to 900 psi (hydraulic/allfluid) Ambient temperature: F to 0 F (-0 C to 60 C) Vac to 900 psi Consult our Technical Service for use below F (+2 C). Models Model No. Port Measuring range (psi) Max overpressure Output size (relative pressure) (psi) signal NPT Accessories Electrical Connector M2 x Straight 90 x 2 m long x 2 m long 0862 /" Vac - 20 x PNP 08622 / Vac - 20 2 x PNP 829 829 829 829 www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com PSC-
PNEUMATIC PRESSURE SWITCHES Diaphragm type Vac - psi Adjustable setpoint Gold-plated contacts Vibration resistant to g Microswitch approved by UL and CSA Medium Neutral, gaseous and liquid fluids Operating pressure Vac to psi Over pressure 0 psi Ambient temperature - F to 7 F (-0 C to + 80 C) Viscosity Up to 000 mm2/s (±0 ssu). Fluid temperature - F to 7 F (-0 C to +80 C) Repeatability ±%, for vacuum ±% Electrical connection DIN 60 Switching element Microswitch Degree of protection IP 6 Switch Adjustment 2.9 ().8 (0).2 (.) 2.8 (72).6 (.).8 (0) 2.9 (7).9 ().8 (0).2 (.). (8) 2.8 (72).8 (0) 2.9 (7) Switch Adjustment / NPT or G / Models Pneumatic Port Type Pressure Switching pressure Dimension Model size range difference psi* (bar) Drawing No. No. NPT psi (bar) lower range upper range Pressure port material: 0 SS (.0) / NPT, G / or 7/6-20 UNF Thread Tube Straight 90º swivel NPT Size Fitting elbow 2 p 0880220 /" Female 0 (0.2 2) 2 (0.) (0.27 088020 /" Female 7 20 (0. 8) (0.2) 9 (0.6) 2 088020 /" Female 20 ( 6) (0.2) (0.90) 2 Note: Switches are supplied with DIN 60 mating connector. * Switching pressure difference (hysteresis) is not adjustable. Typical values are shown. Caution: Observe switching range. Do not subject switch to maximum allowable pressure during normal operation. Even short pressure peaks must not exceed this value. Electrical Information Electromagnetic compatibility CE marked: conforms to EC requirements EN 008-2 (99) and EN 0082-2 (99) Electrical input signal to 20 ma or 0 to 0 V factory set Electrical power input 2 V d.c. ±2% (power consumption < W) Output pressure feedback signal 0... 0 V full range Connections DIN 60 or Brad Harrison connection for feedback output Pin configuration 2 +2 V d.c. supply 2 0 to 0 full range Control signal (+ve) Common (DC supply, signal and feedback return) Chassis (earth) PSC-6 www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com
HYDRAULIC PRESSURE SWITCHES Piston type Adjustable setpoint Gold-plated contacts Vibration resistant to g Microswitch approved by UL and CSA 70 to 600 psi.9 ().8 (0).2 (.). (8) 2.8 (72) Pressure port material: 0 SS (.0).8 (0) 2.9 (7) Switch Adjustment / NPT, G / or 7/6-20 UNF Medium Hydraulics, lubricating and light fuel oils Operating pressure 70 to 600 psi Over pressure 800 psi, 0882xx: 8700 psi Ambient temperature - F to 7 F (-20 C to + 80 C) Viscosity Up to 000 mm2/s (±0 ssu). Fluid temperature - F to 7 F (-20 C to +80 C) Repeatability ±% Electrical connection DIN 60 Switching element Microswitch Degree of protection IP 6 Models Hydraulic Port Type Pressure range Switching pressure Dimension Model size psi (bar) difference psi* (bar) Drawing No. lower range upper range No. 2 Thread Tube Straight 90º swivel NPT Size Fitting elbow 08829 7/6-20 UNF female 70 0 ( 70) 2 (0.) 28 () 088220 / NPT female 70 0 ( 70) 2 (0.) 28 () 088229 7/6-20 UNF female 0 220 (0 60) 60 () 27 (7) 0882220 / NPT female 0 220 (0 60) 60 () 27 (7) 08829 7/6-20 UNF female 60 600 (2 20) 60 () 27 (7) 088220 / NPT female 60 600 (2 20) 60 () 27 (7) 088220 / NPT female 80 600 (0 20) 27 (7) 08 () N/A N/A N/A N/A N/A N/A Note: Switches are supplied with DIN 60 mating connector. * Switching pressure difference (hysteresis) is not adjustable. Typical values are shown. Caution: Observe switching range. Do not subject switch to maximum allowable pressure during normal operation. Even short pressure peaks must not exceed this value. Electrical Information Electromagnetic compatibility CE marked: conforms to EC requirements EN 008-2 (99) and EN 0082-2 (99) Electrical input signal to 20 ma or 0 to 0 V factory set Electrical power input 2 V d.c. ±2% (power consumption < W) Output pressure feedback signal 0... 0 V full range or user-configurable switched output Connections DIN 60 or Brad Harrison connection for feedback output Pin configuration 2 +2 V d.c. supply 2 Monitor output Control signal (+ve) Common (DC supply, signal and feedback return) Chassis (earth) www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com PSC-7
NORGREN EXPRESS. The fast track to rail success If your business is working with the rail industry, you probably already know about Norgren. After all, we have over 2 years in supporting companies just like yours, with applications ranging from oil carryover through pantographs to water control. If you re doing a refurbishment project, Norgren Express can advise which spares you need everything from airline equipment and valves, to specialist fittings. Looking for standard airline spares? Norgren Express can help supply many of the specialist rail products. AIRLINE VALVES FITTINGS Visit www.norgren.com/rail or call the Express Team today for rapid support on your rail refurbishment projects www.cfcsite.com (888) 696-06 tel (70) 88-6 fax Info@cfcsite.com