Price list (VAT inclusive)march 2015

Price list (VAT inclusive)march 2015 *Prices correct at time of printing, not guaranteed for any fixed period. Please contact us by phone 01325 381300 or fax 01325 381300 or e-mail: sales@m-machine.co.uk All major credit and debit cards accepted, including Paypal We are open for counter service weekdays from 8.30am to 12.30pm and 1.00pm to 5.00pm and often on Saturdays 9.00am to 12.00am (Please phone for a Saturday visit). Carriage rates Small orders, Less than 13" and Weight up to 1 Kg 4.80 Weights from 1 Kg to 5kg, up to 24" will be sent by carrier at a cost of 9.00 Weights 5k to 15k or longer than 24" are 12.00 15k plus are charged at 0.50p per kilo extra. Carriage charges for the Highlands & Islands, Isle of Man, Channel Islands and Export, quoted at time of order. Page 1

Terms of business, Pricing and Delivery. Payment. 1 Your remittance, or card details, should accompany any order sent by post, which should include your address and telephone number. 2 Payment is acceptable by all major credit/debit cards, cheque (subject to the usual conditions), postal orders and PayPal. 3 Cheques and postal orders made payable to M-Machine. 4 We require full card details for Debit/credit card payment (Please ring if unsure) Goods 1 Although care has been taken in the compiling of this catalogue, no liability can be accepted for any error. 2 On the rare occasions where damage or loss of goods in transit occurs, compensation may be paid after a satisfactory investigation. 3 Ideally, goods for mail order will be a maximum of 750mm in length, but please state if specific lengths above this are required, as we can supply lengths up to a maximum of 3M but with modification of carriage charge. 4 Goods will usually be despached within 10 working days or as soon as complete. Catalogue Prices 1 Unless otherwise stated, Lengths of material will be supplied plus or minus 2%. Please ensure you order sufficient to cover your FINISHED length. 2 Most prices are quoted as price per foot/300mm or per Inch/25mm. Please note that you can order the exact amount of material you need but requirments less than one inch/25mm will carry the 1 inch/25mm price and requirments less than one foot/300mm price band may carry one foot/300mm price. 3 We reserve the right to charge a minimum of 6.00 for goods on very small orders 4 Carriage charges will be applied as follows: Packages up to 1KG in weight will be sent by first class post with a minimum charge of 4.80, Packages between 1Kg to 5kgs will be sent by carrier at a cost of 9.00 Consignments weighing 5k to 15k at 12.00, >15k 0.50p per kilo extra. Any parcel exceeding 1.5metres in length will be subject to special rates. 5 VAT (at 20%) is included in all prices in this catalogue. Page 2

Diameters HE 30 (6082) Aluminium Price per foot/300mm Price per inch/25mm 3/16" 0.90 7/8" 0.53 2" 1.38 4" 6.36 6mm 1.34 25mm 0.54 2 1/8" 1.50 4 1/4" 7.20 1/4" 1.34 1" 0.60 2 1/4" 1.92 4 1/2" 7.80 5/16" 1.38 1 1/8" 0.60 2 1/2" 2.04 5" 8.40 10mm 1.44 30mm 0.60 65mm 2.04 51/2" 10.20 3/8" 1.50 1 1/4" 0.60 2 3/8" 2.04 6" 12.00 7/16" 1.58 1 3/8" 0.60 2 5/8" 2.30 6.5" 13.20 12mm 1.80 1 1/2" 0.72 2 3/4" 2.52 7" 15.50 1/2" 1.98 40mm 0.91 70mm 2.52 8" 20.57 9/16" 2.34 1 5/8" 0.96 3" 2.88 210mm 23.74 5/8" 3.17 1 3/4" 1.34 3 1/4" 3.26 9" 26.78 16mm 3.17 1 7/8" 1.36 3 1/2" 3.90 11" POA 3/4" 3.54 50mm 1.37 3 3/4 6.24 20mm 3.54 Diameters 6262 (Free Machining) Price per foot/300mm Diameters 2014 HE15 3/8" 2.34 Price per foot/300mm Price per inch/25mm 10mm 2.34 1/8" POA 1-1/8" 1.14 7/16" 2.40 3/16" POA 1-1/4" 1.44 1/2" 3.74 1/4" 4.03 1-3/8" POA 5/8" 3.84 5/16" POA 1-1/2" 1.80 3/4" 4.20 3/8" 6.53 1-5/8" 2.30 7/16" 7.32 1-3/4" 2.52 Price per inch/25mm 1/2" 7.38 1-7/8" 2.94 1" 0.53 9/16" POA 2" 3.00 1 1/8" 0.67 5/8" 7.44 2 1/4" 3.17 1 1/4" 0.86 3/4" 8.40 2 1/2" 4.32 1 3/8" 0.90 7/8" POA 3 1/2" 5.40 1 1/2" 1.01 1" 1.01 9" 28.80 1 5/8" 1.19 1 3/4" 1.44 1 7/8" 1.63 H15 2014 2" 1.92 2 1/4" 2.28 Price per inch/25mm 2.1/2" 2.77 1/4" x 1/2" 0.96 1" X 2" 1.75 10mmx32mm 1.80 3" 3.52 5/8 X 1 3/4 1.56 1" x 4" 3.36 12mm x 13mm 0.84 3.1/4" 4.20 5/8 X 1 1/2 1.68 1" X 2-1/2" 2.16 12mm x 51mm 1.44 3.1/2" 4.68 3/4 X 1 1/2 0.96 1 1/2 x 2 2.40 15mm x 28mm 1.34 3.3/4 5.82 3/4 X 2 1.08 8mmx51mm 1.30 65mmx400mm 1.80 4" 5.94 1" x 1" 1.15 3" x 4.5" 9.07 3" Thick 6.36 1/4 Thick 0.50 Flats HE30 Price Per Foot/300mm Price per inch/25mm 1/16" x 1/2" 0.80 3/16" x 11/4" 2.10 5/16" x 1" 3.06 1/2" x 3/4" 2.11 3/4" x 1 1/2" 0.65 1/16" x 3/4" 0.80 3/16" x 11/2" 2.40 5/16"x1.1/2" 3.12 1/2" x 1" 2.76 3/4" x 1 3/4" 0.72 1/16" x 1" 0.80 3/16" x 3" 3.60 5/16" x 2" 4.08 1/2" x 1 1/4" 3.84 3/4" x 2" 0.77 1/8" x 1/4" 2.04 3/16" x 4" 5.04 5/16" x 3" 4.75 1/2" x 1 1/2" 4.20 3/4" x 2-1/2" 0.90 1/8" x 3/8" 2.06 1/4" x 3/8" 1.54 5/16" x 4" 12.60 1/2" x 1 3/4" 6.77 3/4" x 3" 1.14 1/8" x 1/2" 2.10 1/4" x 1/2" 2.04 3/8" x 1/2" 3.00 1/2" x 2" 6.84 3/4" x 4" 1.20 1/8" x 5/8" 1.44 1/4" x 5/8" 2.40 3/8" x 5/8" 3.06 1/2" x 2-1/2" 7.02 3/4" x 5" 1.73 1/8" x 3/4" 1.44 1/4" x 3/4" 2.72 3/8" x 3/4" 3.18 1/2" x 3" 7.92 3/4" x 6" 1.92 1/8" x 1" 2.40 1/4" x 1" 2.74 3/8" x 1" 3.24 1/2" x 3-1/2" 0.00 1" x 1 1/4" 0.60 3mm x 25mm 2.40 1/4" x 11/4" 2.76 3/8" x 11/4" 3.36 1/2" x 4" 11.81 1" x 1 1/2" 0.72 1/8" x 11/4" 2.40 1/4" x 11/2" 2.82 3/8" x 1 1/2" 3.96 1/2" x 5" 12.14 1" x 1 3/4" 0.84 1/8" x 1 1/2" 2.40 1/4" x 13/4" 2.88 3/8" x 1 3/4" 3.72 1/2" x 6" 16.68 1" x 2" 0.96 3mm x 50mm 2.40 6mm x 50mm 3.60 3/8" x 2 " 4.50 15mm x 150mm 22.44 1" x 2 1/2" 1.20 1/8" x 1-3/4" 2.40 1/4" x 2" 3.60 3/8" x 2 1/2" 5.40 5/8"x3/4" 3.60 1" x 3" 1.32 1/8" x 2 " 2.40 1/4" x 21/2". 3/8" x 3" 6.10 5/8" x 1" 4.80 1" x 3 1/2" 1.80 1/8" x 2 1/2" 2.40 1/4" x 3" 5.10 3/8" x 4" 7.20 5/8" x 1 1/2" 9.00 1" x 4" 1.92 1/8" x 3" 2.64 1/4" x 31/2" 6.71 3/8" x 5" 11.66 5/8" x 2" 9.60 1" x 5" 2.06 1/8" x 4" 4.61 6mm x 100 7.56 3/8" x 6" 13.20 5/8" x 21/2" 9.90 1 1/4" x 2" 1.20 3mmx 100mm 5.23 1/4" x 4" 7.56 3/8" x 7" 18.00 5/8" x 3" 10.56 1 1/4" x 21/2" 1.27 1/8" x 6" 5.40 1/4" x 5" 7.80 3/8" x 8" 23.40 5/8" x 4" 15.00 1 1/4" x 3" 1.87 3/16" x 1/2" 1.20 6mm x 150 8.40 3/8" x 9" 26.35 5/8" x 6" 22.44 1 1/4" x 4" 2.10 3/16"x5/8" 1.50 1/4" x 6" 8.64 3/8" x 200 25.20 5/8"x12" 64.37 1 1/4" x 5" 2.64 3/16" x 3/4" 1.50 5/16" x 1/2" 2.28 10 x 150 13.20 3/4" x 1 " 4.20 1 1/2" x 2" 1.20 3/16" x 1" 1.80 5/16" x 3/4" 2.95 10mm x 220 23.40 3/4" x 11/4 " 5.40 1 1/2" x 2 1/2" 1.70 1 1/2" x 3" 2.10 1 1/2" x 4" 2.45 If your requirements are not 2" X 3" 2.45 listed Please enquire. 2" x 2 1/2" 2.40 2" x 4" 3.86 2" x 5" 5.28 2" x 6" 5.52 3" x 4" 6.00 Page 3

Aluminium Squares HE30 Squares H15 Equal Angle HE 30 Price per foot Price per inch/25mm Price per foot/300mm 1/4" 1.63 1" sq 1.08 1/2 x 1/2 x 1/16 1.20 5/16" 1.68 3" sq 6.48 1/2" x 1/2" x 1/8" 1.44 3/8" 1.80 200mm x 200 24.00 5/8"x5/8"x1/16" 1.20 1/2" 2.40 3/4" x 3/4" x 1/16" 1.20 5/8" 3.19 Hexagons HE30 3/4" x 3/4" x 1/8" 1.44 7/8" 4.80 Price per foot 1" x 1" x 1/16" 1.44 3/4" 5.00 3/8" 2.60 25 x 25 x3 1.56 1" 6.90 1/2" 3.36 1" x 1" x 1/8" 1.56 5/8" 3.60 1"x 1" x 3/16" 1.68 Price per inch/25mm.710" 3.89 1 1/4" x 1 1/4" x 1/16" 1.68 1 1/4" 0.60 30mm 4.10 1 1/4" x 1 1/4" x 1/8" 1.80 1 1/2" 1.01 Price per inch 1 1/4" x 1 1/4" x 1/4" 3.60 1 3/4" 1.50 1 1/2" 1.50 1 1/2" x 1 1/2" x 1/16" 2.28 2" 1.80 1 1/2" x 1 1/2" x 1/8" 2.64 2 1/4" 2.40 T' Section 1 1/2" x 1 1/2" x 3/16" 3.00 2 1/2" 2.52 Price per foot/300mm 1 1/2" x 1 1/2" x 1/4" 4.63 2 3/4" 3.36 1"x1"x1/16" 1.80 1-3/4" x 1-3/4" x 1/8" 3.74 70mm 3.36 1"x1"x1/8" 2.10 38 x 38 x 3mm 2.64 3" 3.74 1-1/4" x1-1/4"x1/8 2.40 50mm x 50mm x 3mm 3.96 3 1/2" 5.23 1-1/2"x1-1/2"x1/4" 5.28 2" x 2" x 1/8" 5.29 4" 6.05 2" x 2" x 3/16" 6.14 Channel section HE30 2" x 2" x 1/4" 7.13 Box section HE30 Price per foot/300mm 50 x 50 x6mm 6.60 Price per foot 1" x 1/2" x 1/8" 2.40 21/2" x 2 1/2" x 1/4" 7.20 3/4" x 3/4" x 16swg 1.80 3/4"x3/4"x1/8" 2.40 3" x 3" x 1/8" 5.40 3/4"x3/4"x1/8" 2.59 1" x 3/4" x 1/8" 3.60 3" x 3" x 1/4" 7.20 1" x 1" x 1/8"(10g) 3.00 1-1/2" x 3/4" x 1/8" 3.60 4" x 4" x 1/4" 13.20 1-1/2"x3/4"x16g 2.52 1-1/2" x 1" x 1/8" 4.22 2" x 1" x 1/8" 4.56 25mm x 25mm x 3 2.70 Unequal Angle HE30 2"x1-1/2"x1/8" 4.56 1" x 1" x 1/8" 2.93 Price per foot/300mm 4" x 2" x 1/4" 15.00 1-1/4" x 1/2" x 1/8" 3.20 3/4" x 1/2" x 1/16" 1.20 1 sq x16g 3.30 1-1/4"x3/4"x1/8" 3.00 1" x 1/2" x 1/16" 1.20 1 sq x10g 3.60 1-1/4" x 1" x 1/8" 3.60 1" x 1/2" x 1/8" 1.66 1-1/4 sq x16g 3.70 1 3/4" x 1" x 1/8" 4.61 1" x 3/4" x 1/8" 1.68 1-1/4 sq x10g 4.20 2" x 1" x 1/8" 4.68 1-1/4" x 3/4" x 1/8" 3.14 1-1/2 sq x16g 4.80 2" x 1-1/2" x 1/8" 4.80 1-1/2" x 1/2" x 1/8" 3.30 1-1/2 sq x 1/8 " 4.98 2" x 2" x 1/8" 5.76 1-1/2"x1"x1/8" 2.04 1-3/4 x 1 3/4 x 1/8 4.44 2-1/2"" x 1" x 1/8" 3.00 2" x 1" x 1/8" 3.36 3 x3 x1/8 6.96 2-1/2" x 1-1/2" x 3/16" 4.97 2" x 1" x 3/16" 3.84 3"x2"x1/4" 12.48 2" x 1" x 1/4" 4.80 4" x 2" x 3/16" 7.20 4" x 2" x1/4" 8.64 We are currently expanding the range of Aluminium sections including 'T' section. Please enquire. Page 4

Sheet & Plate 1050A Per sq foot/300mm Aluminium Sheet & Plate H15 Per sq foot/300mm 0.5mm 2.40 5mm 30.96 0.8mm 2.88 6mm 35.52 Conversion Table 1.0mm 3.42 1/4 Th 60.00 SWG INCH MM 1.2mm 3.96 1/2Th POA 26 0.018 0.457 1.5mm 4.50 20mm 3.19 24 0.022 0.559 2.0mm (14swg) 4.80 1 1/4"Th 172.80 22 0.028 0.711 2.5mm 5.40 2" Th 303.84 21 0.032 0.813 3.mm 6.30 20 0.036 0.914 4mm 8.40 Treadplate 19 0.04 1.016 5mm 12.00 Per Sq Foot/300mm 18 0.048 1.219 6mm 14.40 1.5mm 3.79 16 0.064 1.626 8mm 23.70 2.0mm 5.40 14 0.08 2.032 10swg (3mm) 11.80 3.0mm 7.39 13 0.092 2.35 12 swg 9.28 6mm 12.00 12 0.104 2.642 14 swg 7.58 10 0.128 3.251 16 swg 5.40 Cast Tooling Plate. 19 swg 5.54 Per sq foot/300mm 20swg (.9mm) 3.00 *Dimensioned from plate POA 22swg (.71mm) 2.70 24swg (.55mm) 2.40 To convert 1/4" Th 28.80 mm to inch divide by 25.4 3/8" POA mm to feet divide by 304.8 10mm 39.12 mm sq to inch sq divide by 645.16 3/4" Th 50.40 mm sq to feet sq divide by 92903.04 1/2" Th 69.12 Inch sq to feet sq divide by 144 30mm 103.68 2" Th 180.00 Tube H30 Price per foot/300mm Price per inch/25mm 1/4" OD x 16swg 2.40 1 1/4" OD x 18swg 0.24 60OD x 3mm wall 0.78 5/16"x20swg 2.40 1 1/4" OD x 16swg 0.30 2.5" OD x 16swg 0.42 5/16" OD x16swg 2.40 1 1/4" OD x 14swg 0.34 2.5" OD X 10swg 0.60 3/8" OD x 16swg 2.40 1 1/4" OD x 10swg 0.36 2.5" OD X 1/4" wall 1.13 3/8" OD x 20swg 2.40 1 1/4" OD x 4mm wall 0.48 2.5" OD X 3/8" wall 1.44 7/16" OD x 16swg 2.40 1-1/4" x 1/4" wall 0.58 2.5" OD X 1/2" wall 1.50 1/2" OD x 16swg 2.40 1 3/8" OD x 10swg 0.90 2.75" OD X 1/4" wall 1.08 1/2" OD x 10swg 2.70 1 3/8" OD x 16swg 0.84 3.00"ODx16swg 0.43 5/8" OD x 10swg 2.70 1 1/2" OD x 16swg 0.34 3.00" OD X 1/8" wall 0.60 5/8" OD x 16swg 2.70 40 OD x 1.5mm 0.36 3.00" OD X 3/16" wall 1.10 3/4" OD x 18swg 3.30 1 1/2" OD x 10swg 0.34 3.00" OD X 3/8" wall 1.50 3/4" OD x 16swg 3.60 1 1/2"ODx3/16"wall 0.55 3.00" OD X 1/2" wall 3.24 3/4"ODx14swg 3.60 1 1/2" OD x 1/4 wall 0.60 3-1/4" OD X 1/2" wall 3.00 3/4" OD x 10swg 3.60 1 5/8" OD x 16swg 0.43 3 1/2" OD x 10swg 0.72 7/8" OD x 10swg 5.28 1 5/8" OD x 10swg 0.48 3 1/2" OD x 1/4 wall 1.44 7/8" OD x 16swg 4.32 1 5/8" OD x 1/4 wall 1.30 4.00" OD x 10swg 0.84 7/8" OD x 18swg 4.32 1 3/4" OD x 16swg 0.46 4.00" OD X 1/4" wall 2.04 1" OD x 10swg 5.28 1 3/4" OD x 10swg 0.48 4.00" OD X 3/8" wall POA 1" OD x 16swg 2.40 1 3/4" OD x 1/4" wall 0.72 4.00" OD X 1/2" wall 2.40 1" OD x 3/16 5.40 2" OD x 10swg 0.66 4.1/2" OD X 3/8" wall 2.90 1-1/8" OD x 10swg 6.00 2" OD X 16swg wall 0.41 4.1/2" OD X 1/4" wall 2.52 1-1/8" OD x 16swg 5.40 2" OD X 1/4" wall 0.72 5.00"OD x 10swg 1.50 2" OD X 3/8" wall 1.20 5.00" OD X 1/4" wall 3.02 2" OD X 1/2" wall 1.56 5.00" OD X 1" wall 14.40 2-1/4" OD x 1/16" 0.36 6.00" OD X 10swg 2.40 2-1/4" OD X 1/8" wall 0.84 6.00" OD X 1/4" wall 2.29 2-1/4" OD X 1/4" wall 1.20 6.00" OD X 1/2" wall 5.59 52.9 OD x 1.5mm wall 0.60 7" OD x 1/2" wall 9.60 59.2 OD x 1.6 wall 0.77 7 1/2" OD X 1/4" wall 7.20 Page 5

Brass Diameters CZ121 Price per foot/300mm Price per inch/25mm 0.104" 0.90 5/8" 0.67 2-5/8" 12.17 1/16" 1.20 16mm 0.67 2-3/4" 12.26 2mm 1.50 17mm 0.80 2-7/8" POA 3/32" 1.94 11/16" 0.86 3" D 14.40 7/64" 1.58 3/4" 1.00 3-1/4 " 17.16 3mm 1.50 18mm 0.95 3-1/2" 20.21 1/8 1.50 20mm 1.00 3-3/4" 21.00 9/64 1.50 13/16 1.00 4" 22.99 5/32 1.50 22mm 1.20 4-1/4" 25.20 4mm 1.50 7/8" 1.20 4-1/2" 26.40 3/16" 1.50 15/16 1.34 4-3/4" 39.22 7/32" 1.50 25mm 1.61 5" POA 5mm 1.60 1" 1.61 5-1/2" 41.50 1/4" 1.70 1 1/16" 1.92 6 " POA 6mm 1.70 1 1/8" 1.94 6-3/2" 54.00 7mm 2.40 1 3/16" 2.28 7" POA 9/32 2.40 30mm 2.30 71/2 POA 5/16" 2.40 1 1/4" 2.42 8" POA 8mm 2.40 1/ 3/8" 2.64 11/32 2.94 1 1/2" 3.24 We are also stock: 3/8" 3.22 40mm 3.41 CZ114 Mang Bronze, 10mm 3.29 1 5/8" 3.84 CZ112 Naval Brass, and CZ131. 11mm 4.15 1-3/4" 4.87 Please enquire. 7/16" 4.15 1-7/8" 5.66 12mm 4.90 50mm 6.00 1/2" 4.90 2" 6.00 13mm 4.90 2-1/8" 6.86 9/16" 5.69 2-1/4" 7.44 14mm 6.50 2-3/8" 9.60 15mm 6.72 2-1/2" 10.08 Squares CZ121 Price per foot/300mm Price Per Inch/25mm 3/32" (Coiled) 1.20 3/8" 4.60 1" 2.02 3/32" 1.56 10mm 4.75 1 1/8" 2.52 1/8" 1.92 7/16" 7.20 1 1/4" 3.36 5/32" 2.00 12mm sq 7.20 1 3/8" 4.20 3/16" 2.00 1/2" 7.50 1 1/2" 5.06 5mm 2.34 9/16" 11.10 40mm sq 6.00 7/32" 15mm 11.10 1 3/4" 5.76 6mm 2.40 5/8" 11.10 2 " 8.40 1/4" 2.50 16mm 11.11 2 1/4" 9.60 9/32" sq 3.86 3/4" 15.90 2 1/2" 10.56 5/16" 3.90 7/8" 15.90 2-3/4" 12.72 Hexagons CZ121 Price per foot/300mm 20mm 15.90 4" 30.00 Price per inch/25mm 1/8" 2.22 3/8" 3.96 11/16" 1.01 1 " 1.70 5/32" 4mm 2.22 10mm 3.96.710" 1.03 1.100" 2.62 3/16" 2.22 7/16" 4.98 3/4" 1.15 1 1/8" 2.16.193" 2.22 0.445 5.54 13/16" 1.20 1.2" POA.218"7/32" 2.40 12mm 5.83 0.820" 1.32 1 1/4" 2.88 6mm 2.40 1/2" 5.83 7/8" 1.39 1.3" POA 1/4" 2.40 0.525" 6.60.920" POA 1.48 3.84 7mm 2.88 9/16" 8.04 15/16 " 1.44 1.1/2" 4.08.281"9/32" 2.88 15mm 8.35 24mm 1.56 1.86" 6.72 5/16" 2.93 0.601" 7.08 8mm 2.95 5/8" 10.20 0.324 3.60 Hexagon Naval Brass CZ112 Price Per Inch/25mm Hexagon Mang Bronze Price Per Inch/25mm 1.3" 3.19 9/16 1.00 1.86" 9.31 1.860" 6.60 1.100" 3.25 2.05" 11.14 2.22" 8.76 1.300" 5.21 2.76" 23.40 1.48" 5.86 1 7/16 4.87 1.67" 6.60 We are building stock of Naval Brass CZ121 and Mang Bronze CZ114 Hexagons. If your size requirement is not listed, please enquire. Page 6

Brass Flats CZ121 Price per foot/300mm Price per inch/25mm 1/32" x 1/2" 1.36 3/16" x 3/4" 4.62 5/16" x 1" 0.90 1/2" x 2 1/2" 2.88 1/16" x 1/4" 1.80 3/16" x 1" 5.04 5/16" x 1 1/2" 1.20 1/2" x 3" 3.22 1/16" x 5/16" 1.36 3/16" x 1 1/4" 6.36 5/16" x 2" 1.56 1/2"x5" 5.86 1/16" x 3/8" 2.40 3/16" x 1 1/2" 9.14 5/16" x 2 1/2" 1.78 1/2" x 6" 7.06 1/16" x 1/2" 2.64 3/16" x 2" 11.40 5/16" x 3" 2.21 5/8" x 1" 1.56 1/16" x 5/8" 2.82 3/16" x 21/2" 15.07 5/16" x 3 1/2" 2.40 5/8" x 1-1/2" 2.18 1/16" x 3/4" 3.48 3/16" x 3" 17.45 3/8" x 1/2" 0.60 5/8" x 2" 2.64 1.5mm x 25mm 4.03 3/16" x 4" 24.19 3/8" x 5/8" 0.68 5/8" x 3" 4.20 1/16" x 1" 4.15 1/4" x 3/8" 3.25 3/8" x 3/4" 0.72 5/8" x 4" 5.09 1/16" x 2" POA 1/4" x 1/2" 5.52 3/8" x 1" 0.96 3/4" x 1 " 1.73 3/32 x 1/4 POA 1/4" x 5/8" 6.10 3/8" x 1 1/4" 1.22 3/4" x 1 1/4" 2.30 3/32" x 3/4" 3.36 1/4" x 3/4" 6.36 3/8" x 1 1/2" 1.32 3/4" x 1 1/2" 2.52 1/8" x 1/4" 2.28 1/4" x 7/8" 6.43 3/8" x 2" 1.92 3/4" x 2" 3.53 1/8" x 3/8" 2.33 1/4" x 1" 6.60 3/8" x 2 1/2" 2.47 3/4" x 3" 5.35 1/8" x 1/2" 3.98 1/4" x 11/4" 9.00 3/8" x 3" 3.72 3/4" x 4" 6.19 1/8" x 5/8" POA 1/4" x 1 1/2" 11.52 3/8" x 4" 4.50 1" x 1 1/2" 3.13 1/8" x 3/4" 3.30 1/4" x 1 3/4" POA 3/8 x 6" 5.40 1" x 1 3/4" 3.91 1/8" x 7/8" 3.54 1/4" X 2" 15.38 1/2" x 5/8" 1.08 1" x 2" 4.68 1/8" x 1" 3.91 1/4" x 2-1/4" 17.21 1/2" x 3/4" 1.26 1" x 2-1/2" 5.04 1/8" x 1 1/4" 5.40 1/4"x2-1/2" 19.26 1/2" x 7/8" 1.38 1" x 3" 6.83 1/8" x 1 1/2" 6.30 1/4" X 3" 19.68 1/2" x 1" 1.44 1" x 3 1/2" 8.38 1/8" x 1 3/4" 7.10 1/4" x 4" 26.04 1/2" x 1 1/4" 1.54 1 1/4" x 2" 5.88 1/8" x 2" 7.25 1/4" X 5" 45.74 1/2" x 1 1/2" 1.92 1 1/4" x 3" 9.29 1/8" x 2 1/2" 7.80 1/4" X 6" 45.96 1/2" x 1 3/4" POA 1 1/2" x 2" 8.34 1/8" x 3" 11.40 5/16" x 3/8" 4.80 1/2" x 2" POA 1 1/2" x 2 1/2" 8.66 1/8" x 4" POA 5/16" x 1/2" 5.18 1 1/2" x 3" 10.03 3/16" x 1/4" POA 5/16" x 5/8" 6.48 3/16" x 3/8" 2.64 5/16" x 3/4" 7.78 3/16" x 1/2" 3.38 5/16" x 7/8" 7.80 3/16" x 5/8" 4.18 Angles Equal CZ121 Half Round CZ121 Price per foot/300mm Price per foot/300mm Angles Unequal CZ121 1/8" 2.82 1/4" x 1/4" x 1/16" 2.00 Price per foot/300mm 6mm x 3mm 2.40 5/16" x 5/16" x 1/16" 2.70 1 1/4" x 3/4" x 1/8" 4.62 1/4" 3.67 3/8" x 3/8" x 1/16" 3.30 1 1/2" x 3/4" x 1/8" 4.74 3/8" 2.40 1/2" x 1/2" x 1/16" 3.60 10mm 2.40 1/2" x 1/2" x 1/8" 3.84 1/2" 4.37 5/8" x 5/8" x 1/16 4.20 3/4" x 3/16 4.80 5/8" x 5/8" x 1/8" 4.80 1"X 3/16 5.40 3/4" x 3/4" x 1/16" 4.80 1" x 1/4" 6.94 3/4" x 3/4" x 1/8" 5.00 Tees CZ121 1" x 1" x 1/16" 5.40 Price per inch/25mm Channels CZ121 1" x 1" x 1/8" 7.00 3/8" x 3/8" x 1/16" 0.43 Price per inch/25mm 1" x 1" x 3/16" 9.00 1/2" x 1/2" x 1/16" 0.48 3/8" x 3/8" x 1/16" 0.74 1" x 1" x 1/4" 14.40 1/2" x 1/2" x 1/8" 0.61 1/2" x 1/2" x 1/16" 0.84 1 1/4" x 1 1/4" x 1/8" 9.19 3/4" x 3/4" x 1/8" 0.72 3/4 x 3/4 x 1/8 1.62 1 1/2" x 1 1/2" x 1/4" 12.67 3/4" x 3/4" x 1/16" 0.61 2" x 2" x 1/8" 14.06 2" x 2" x 3/16" 18.96 We are currently expanding our range of Angles,Channels and 'T' sections, Please enquire. Page 7

Shim Price Per 1/2 sq Foot Brass To convert 0.001" Th 5.64 mm to inch divide by 25.4 0.0015" Th 7.15 mm to feet divide by 304.8 0.002" Th 7.20 mm sq to inch sq divide by 645.16 0.003" Th 7.80 mm sq to feet sq divide by 92903.04 0.004" Th 9.90 Inch sq to feet sq divide by 144 0.005" Th 11.33 0.006" Th 11.34 0.008" Th 11.90 0.010" Th 12.00 0.015" Th 14.35 0.020" Th 15.55 Sheet CZ120 Price per sq foot/300mm Sheet CZ108 22swg(0.7mm) 14.33 Price per sq foot/300mm 20 swg(.9mm) 19.20 0.4mm 10.42 18 swg(1.2mm) 24.00 27swg 9.91 1.5mm 28.80 26swg 7.20 16swg 28.80 25swg 7.20 14swg 38.40 0.5mm 9.60 12swg(2.64mm) 42.00 24swg (.55mm) 9.60 3mm 46.20 22swg(0.7mm) 11.04 10 swg 46.20 21swg(0.8mm) 12.60 20 swg(.9mm) 14.40 We can also supply Heavier Brass pl 19 swg 14.28 CZ121, 120,112 Naval. Please enqu 18 swg (1.2mm) 19.80 1.5mm 26.16 Wire 1.6mm 26.16 10fts/3mts 16swg 26.16 26swg 3.53 14swg 33.24 24swg 3.60 13swg (2.3mm) 34.80 20swg 4.26 2.5mm 34.80 18swg 4.66 12swg (2.64mm 34.80 16swg 5.81 3mm 43.80 14swg 7.44 10 swg 45.00 2mm 7.44 4mm 55.44 8mm 120.00 Conversion Table SWG INCH MM Boiler Band 26 0.018 0.457 24 0.022 0.559 1/8" x 22swg 0.50 22 0.028 0.711 5/32" x 22swg 0.54 21 0.032 0.813 3/16" x 22swg 0.65 20 0.036 0.914 1/4" x 22swg 0.78 19 0.04 1.016 5/16" x 22swg 0.98 18 0.048 1.219 3/8" x 22swg 1.68 16 0.064 1.626 1/2" x 22swg 2.88 14 0.08 2.032 5/8" x 22swg 3.07 13 0.092 2.35 3/4" x 22swg 3.60 12 0.104 2.642 1" x 22swg 3.30 10 0.128 3.251 Page 8

Brass Brass Round Tube Brass Square Tube Price per foot/300mm Price Per Inch/25mm Price per foot/300mm 1/16" OD x 26swg 2.10 1" OD x 3/16" wall 2.50 1/4 x 1/4 22swg 6.60 3/32" OD x 24swg 3.17 1" OD x 1/4" wall 2.52 5/16 x 5/16 22swg 7.51 1/8" x 22swg 2.10 1 1/8" OD x 16swg 1.20 3/8 x 3/8 x18 swg 3.68 1/8" x 24swg 2.10 1 1/4" x 1/4 wall 2.10 7/16 x 7/16 4.88 5/32" OD x 22swg 2.10 1 1/4" x 10swg 1.34 1/2" x 1/2" x 16swg 9.29 5/32" OD x 24swg 2.10 1 1/4" x 20swg 0.89 3/4" x 3/4" x 16swg 10.37 5/32" OD x 28swg 2.10 1 1/4" x 16swg 1.44 1" x 1"x 16swg 9.24 3/16" OD x 16swg 2.33 32mmx 16mm ID 2.21 3/16" OD x 20swg 2.16 1 3/8" OD x 16swg 2.21 Price Per Inch/25mm 3/16" OD x 22swg 2.10 1 1/2" OD x 10swg 1.80 1 1/4" x 1 1/4" 1.14 3/16" OD x 28swg 2.10 1 1/2" x 16swg 1.32 1 1/2" x 1 1/2" 2.10 7/32" OD x 20swg 2.10 1 1/2" x 20swg 0.96 2" x 2" 2.04 6mm OD x 1mm 3.19 1 1/2" x 1/4 wall 3.24 1/4" OD x 16swg 2.70 1 5/8" OD x 10swg POA 1/4" OD x 24swg 2.45 1 5/8" OD x 16swg 1.42 1/4" OD x 22swg 2.45 1 3/4" OD x 16swg 1.61 1/4" OD x 20swg 2.45 1 3/4" OD x 10swg 2.11 1/4" OD x 18swg 2.58 1-3/4" x 1/4"wall 3.07 9/32" OD x 26swg 3.07 1-3/4" x 3/8"wall 4.08 5/16" OD x 16swg 4.80 2" OD x 1/4 3.48 5/16" OD x 18swg 3.65 2" OD x 3/16 3.58 5/16" OD x 22swg 2.51 2" OD x 10swg 2.21 5/16" OD x 24swg 2.57 2" OD x 16swg 1.80 5/16" OD x 20swg 2.59 2" OD x 18swg 1.80 3/8" OD x 26swg 3.24 2" OD x 20swg 1.01 3/8" OD x 20swg 3.36 2 1/4" OD x 16swg 1.80 3/8" OD x 22swg 3.36 2 1/2" OD x 16swg 1.92 3/8" OD x 18swg 3.84 2 1/2" OD x 10swg 10.08 3/8" OD x 16swg 3.96 2 1/2" OD x 3/16" wall 4.20 7/16" OD x 16swg 3.80 3" OD x 16swg 2.40 7/16" OD x 18swg 3.58 3-1/4"OD x 1/4" wall 6.60 7/16" OD x 20swg 2.72 3-1/4"ODx2-1/2"ID 10.80 1/2" OD x 18swg 5.21 3 1/2" OD x 16swg 3.07 1/2" OD x 20swg 4.91 4" OD x 16swg 3.43 1/2" OD x 16swg 6.05 1/2" x 13swg 7.20 1/2" OD x 26swg 3.80 If your size is not listed, please enquire. 9/16" OD x 20swg 9.12 9/16" OD x 16swg 5.94 5/8" OD x 16swg 5.76 5/8" OD x 18swg 4.80 5/8" OD x 20swg 4.56 5/8"x10swg 9.06 3/4"OD x 26swg 6.26 3/4" OD x 20swg 5.39 3/4" OD x 16swg 8.16 3/4" OD x 18swg 5.94 3/4" OD x 10swg 8.35 7/8" OD x 22swg 5.70 7/8"x 20swg 4.80 7/8" OD x 18swg 7.37 7/8" OD x 16swg 9.98 1" OD x 22swg 6.24 1" OD x 20swg 6.23 1" OD x 18swg 9.29 1" OD x 16swg 11.40 1" OD x 10swg 12.96 Page 9

Cast Iron Rounds GR17 Price per inch/25mm Cast Iron Cast Iron Rounds SG (GGG40) Price per Inch/25mm 25mm D 1.20 105mm D 8.40 30mm D POA 30mm D 1.20 110mm D 9.60 35mm D 1.80 35mm D 1.20 115mm D 10.80 40mm D 2.40 40mm D 1.80 120mm D 12.00 50mm D 3.60 45mm D 2.04 125mm D 13.80 60mm D 4.20 50mm D 2.16 130mm D 14.40 65mm D 4.68 55mm D 2.52 140mm D 15.00 70mm D 5.28 60mm D 3.24 150mm D 18.00 80mm D 7.20 65mm D 3.82 160mm D 21.00 95mm D 8.40 70 mm D 4.28 170mm D 23.76 110mm D 11.35 75mm D 5.04 180mm D 25.56 115mm D 11.40 80mm D 5.54 190mm D 27.00 120mm D 11.40 85mm D 5.94 200mm D 28.20 125mm D 12.60 90mm D 6.12 210mm D 28.80 160mm D 18.00 95mm D 6.60 250 mm D POA 180mm D 21.00 100mm D 7.08 300 mm D POA 240 mm D POA Cast Iron Squares GR17 Price per Inch/25mm Cast Iron Rectangles GR17 Price per Inch/25mm 1" Sq POA 25mm x 40mm 2.40 30mm sq 2.40 30mm x 60mm 3.96 40mm sq 2.40 40mm x 70mm 4.50 45mm Sq 2.40 40mm x 90mm 5.40 50mm Sq 3.00 40mm x 120mm 7.02 55mm Sq 3.60 50mm x 80mm 4.68 60mm Sq 4.80 50mm x 120mm 8.34 65mm sq 6.20 60mm x 130mm 10.74 70mm Sq 7.20 100mmx180mm 16.20 75mm sq 7.74 80mm Sq 7.80 90mm Sq 9.60 Please note. We can cut squares and rectangles to your requirements 100mm Sq 10.20 a small cutting charge will apply. Please enquire. 110mm Sq 11.28 115mmSq 12.60 120mm sq 13.44 125 mm sq 16.20 130mm sq 19.20 140mm sq 20.10 150mm sq 22.80 160mm sq 23.40 Page 10

Copper Rounds C101 Price per foot/300mm Copper Price per inch/25mm 5/32" 2.10 4mm D 2.40 1" D 2.45 40mm D 6.96 1/8" D 2.10 5mm D 3.00 1-1/4" D 4.99 3/16" D 2.40 6mm D 3.00 1 3/4" D 6.07 1/4" D 4.20 8mm D 4.20 2" D 13.80 5/16" D 4.20 10mm D 4.94 2 1/4" D 14.40 3/8" D 4.80 12mm D 6.96 2 3/4" D 18.00 1/2" D 7.20 20mm D 17.88 4" D 25.54 9/16 D 9.96 5/8" D 12.24 3/4" D 15.96 7/8" D 21.24 Copper Tube C106 Price per foot/300mm Price per inch/25mm 1/16" OD x 26swg 1.80 7/16" OD x 22swg 6.86 1 3/8" x 10swg 1.90 3/32" OD x 24swg 1.80 7/16" OD x 20swg 5.04 1 3/8" x 18swg 0.84 1/8" OD x 27swg 1.80 7/16" OD x 18swg 3.48 1 3/8" x 16swg 0.94 1/8" OD x 26swg 1.80 7/16" OD x 16swg 4.32 1 1/2" OD x 20swg 0.85 1/8" OD x 24swg 1.80 1/2" OD x 20swg 4.61 1 1/2" OD x 16swg 1.04 1/8" OD x 22swg 1.80 1/2" OD x 18swg 5.28 1 1/2" OD x 10swg 1.43 1/8" OD x 20swg 1.80 1/2"OD x 16swg 6.89 1 5/8" OD x 16swg 1.09 5/32" OD x 26swg 1.80 9/16" OD x 18swg 5.30 42mm ODx 9swg 3.60 5/32" OD x 24swg 1.80 9/16" OD x 16swg 7.08 1 3/4" OD x 20swg 1.15 5/32" OD x 22swg 1.80 5/8" OD x 20swg 5.59 1 3/4" OD x 16swg 1.68 3/16" OD x 26swg 1.80 5/8" OD x 18swg 7.08 1 3/4" OD x 10swg 2.36 3/16" OD x 24swg 2.52 5/8" OD x 16swg 7.27 2" OD x 20swg 1.25 3/16" OD x 20swg 3.07 3/4" OD x 10swg 14.33 2" OD x 18swg 2.10 3/16" OD x 22swg 2.52 3/4" OD x 14swg POA 2" OD x 16swg 2.88 3/16" x 18swg 11.00 3/4" OD x 16swg 10.39 2" OD x 10swg 3.30 3/16" OD x 16swg 12.00 3/4" OD x 18swg 7.80 2 1/4" OD 16swg 2.40 7/32" OD x 20swg POA 3/4" OD X 20swg 5.70 2 1/4" OD 10swg 4.63 7/32" OD x 24swg POA 7/8" OD x 20swg 6.38 2 1/2" x 20swg 1.80 1/4 OD x 22swg 2.40 7/8" OD x 18swg POA 2 1/2" x 16swg 2.78 1/4" OD X 20swg 2.90 7/8" OD x 16swg 9.48 2 1/2" x 10swg 3.14 1/4" OD x 18swg 2.96 7/8" OD x 17/32 ID 19.20 2 3/4" OD x 16swg 1.80 1/4" OD x 16swg 4.70 1" OD x 10swg 21.46 3" OD X 10swg 4.20 5/16" OD x 22swg 3.46 25mm OD x 16swg 8.83 3" OD X 14swg 2.90 5/16" OD x 18swg 3.82 1" OD x 16swg 9.24 3" OD X 16swg 2.52 5/16" OD x 16swg 3.84 1" OD x 18swg 8.40 3 1/4" x 16swg 2.52 5/16" OD x 20 3.46 1" OD x 20swg 6.60 3-1/4" x 10swg 5.52 3/8" OD x 22swg 4.08 1 1/8" OD x 10swg 25.80 3 1/2" x 16swg 2.93 3/8" OD x 20swg 4.80 1 1/8" OD x 16swg 13.20 3 1/2" x 10swg 5.20 3/8" OD x 18swg 5.62 1 1/8" OD x 20swg 10.44 3 3/4" x 13swg 4.50 3/8" OD x 16swg 5.70 1 1/4" OD x 10swg 18.00 4" x 10swg 6.60 10mm x1mm 2.81 1 1/4" OD x 16swg 14.10 4" x 16swg 5.28 1 1/4" OD x 20swg 10.80 4 1/4"OD x 10swg 6.12 4 1/2"OD x 10swg 7.80 4 1/2"OD x 13swg 6.00 5" OD x 13swg 7.44 5" OD x 10swg 10.50 5-1/4"OD x 10swg 10.80 5-1/2"OD x 10swg 12.00 6" OD x 10swg 12.72 6-1/4" OD x 10swg 10.80 6-1/2" OD x 10swg 12.00 6-3/4" OD x 10swg 12.00 7" OD x 8swg POA 8-1/4" OD x 10swg POA Page 11

Squares C101 Price per foot/300mm Copper Flats C101 Price per foot/300mm 3/16" Sq 7.56 1/8 x 1/2 3.06 3/16" x 5/16" 4.27 6mm Sq 5.71 1/8 x 3/4 3.54 3/16" x 3/4" 5.98 1/4" Sq 5.71 1/8 x 1 1/4" 5.59 3/8" x 1/2" 8.64 3/8" Sq 5.76 1/8 x 2" 8.18 3/8" x 3/4" 10.68 1/2" Sq 9.50 3/16" x 1/2" 4.50 3/8" x 2" 27.36 5/8" Sq 13.20 3/16 x 3/4" 5.70 1/2" x 1" 18.48 3/4" Sq 20.16 3/16 x 1" 7.20 10mm x 15mm 10.08 5mm x 12mm 3.72 1/2" x 2-1/2" 47.52 1/4" x 3/8" 3.83 12mm x 18mm 11.52 1/4" x 1/2" 3.77 1/4" x 1" 6.52 1/4"x3/4" 6.10 Sheet & Plate C106 Deoxidized C101HH Sheet. Price per sq foot/300mm SQ Price Per Sq foot/300mm sq 0.5mm 12.00 1.5mm 27.84 0.3mm 6.60 24swg 12.29 2mm Th 34.80 0.4mm 9.14 22swg (0.7mm) 16.08 2.5mm 43.80 21swg (0.8mm) 16.20 3mm 52.56 Foil/Shim 20swg(0.9mm) 16.86 4mm 70.08 Price Per 1/2 SQ foot/150 mm sq 19swg 16.86 5mm 87.60 0.003" 3.60 18swg 19.92 0.005" 3.60 16swg 27.84 0.010" 7.80 14swg/2mm 34.80 30swg(.0124) 8.00 13swg 43.20 0.015" 9.00 10swg 59.04 3/16" 86.40 1/4" 88.64 5/16" 89.28 Nickel Silver Rounds Price per foot/300mm Flats Sheet 3/32 D 2.40 Price per foot/300mm Price per 1/2 Sq foot/150mm sq 2mmD 3.00 1/16" x 1/4" 1.98 30swg 12.00 1/8" D 3.60 1/4" x 1/8" 3.96 24swg 9.00 5/32 D 3.90 1/8" x 1/8" 2.14 22swg 9.12 3/16" D 5.28 3/16" x 3/16" 3.60 20swg 16.20 6mm 7.15 1mm 20.40 1/4" D 7.15 18swg 21.60 5/16" D 8.94 16swg 25.68 3/8" D 10.73 14swg 27.60 7/16" D 13.25 3mm 42.94 12mm 14.40 1/2" D 15.12 9/16" D 24.36 Conversion Table 5/8" D 25.80 SWG INCH MM 3/4" D 26.40 26 0.018 0.457 20mmD 26.40 24 0.022 0.559 To convert 1" D 41.40 22 0.028 0.711 mm to inch divide by 25.4 Price per inch/25mm 21 0.032 0.813 mm to feet divide by 304.8 1-1/2"D 12.00 20 0.036 0.914 mm sq to inch sq divide by 645.16 19 0.04 1.016 mm sq to feet sq divide by 92903.04 18 0.048 1.219 Inch sq to feet sq divide by 144 16 0.064 1.626 14 0.08 2.032 13 0.092 2.35 12 0.104 2.642 10 0.128 3.251 Page 12

Phos Bronze Rounds PB102 Price Per Foot/300mm Price Per Inch/25mm 1/8" D 2.93 5/8" 1.61 2 1/8" 17.09 5/32" 3.90 3/4" D 2.11 2 1/4" 17.81 3/16" D 3.96 7/8" D 2.64 2 1/2" 18.00 7/32" POA 1" 3.55 2 3/4" 21.60 1/4" D 4.68 1 1/8" 4.80 3" 26.76 5/16" D 4.80 1 3/8 6.72 3 1/4" POA 3/8" D 8.52 1 1/4" D 5.28 3 1/2" POA 10mm 10.61 1 1/2" 7.80 4" POA 7/16" D 10.61 1.5/8 10.75 5" POA 1/2" D 12.24 1 3/4" 12.60 6" POA 2" 14.40 Also available is a limited range of metric sizes. POA. Hexagons PB102 Squares PB102 Price per Inch/25mm Price Per Inch/25mm 1/8" AF 1/2" AF 1.54 1.1" AF 5.40 1/4" 0.48 3/16" AF 0.50 0.525 AF 1.56 1.2" AF 5.82 1/2" 1.38 1/4" AF 0.60 5/8" AF 1.92 1.3" AF 7.20 5/8" 2.27 7mm AF 0.74 7/8" /.875 2.14 1.480" AF 9.24 3/4" 2.94 5/16" AF 0.84 3/4" AF 2.40 1.670" AF 11.81 1" 4.25.324 AF 0.86 0.82 AF 3.12 1.860" AF 15.19 1 1/4" 7.68 3/8" AF 0.96 7/8" AF 3.19 2.050" AF 20.03 1 1/2" 10.08 10mm AF 0.96 0.92 AF 3.19 2.22" AF 21.00 1 3/4" 12.61 7/16"AF 1.08 1" AF 4.08 2" 15.60 Sheet PB102 Per 1/2 sq foot/150mmx300 Price Per SQ inch/25mmsq Price Per inch/25mm 24swg 15.00 1/4" TH 1.54 1/4" x 1" 1.54 20swg 20.02 5/16" TH 1.62 3/8" x 2" 3.96 16swg 25.58 3/8" TH 1.80 1/2" x 1-1/2" 3.36 14swg 31.58 1/2" TH 2.40 1/2" x 2" 5.42 10swg 42.00 3/16" 74.40 5mm 81.60 Shim PB102 Hard Strip PB102 Wire Price Per 1/2 sq ft/150mmsq Price Per Foot/300mm Price Per 10 Foot 0.004 3.60 1/2" x 16swg 3.30 2mm (coil) 18.60 0.006 9.66 3/4" x 16swg 4.97 14swg 8.33 0.01 16.75 1/2" x 18swg 3.20 16swg 9.78 0.024 19.99 5/8 x 14swg 4.43 20swg 5.48 5/8 x 16swg 3.30 21swg 5.60 24swg 5.48 26swg 3.92 If your size is not shown squares,sheet,shim and hard strip, please enquire. Page 13

Rounds PB1 Price Per Inch/25mm Phos Bronze 1/2" D 1.00 61mm 16.80 5/8" D 1.26 2 3/4" 22.37 17mm D 1.39 3" 25.96 3/4" D 3.24 3 1/4" 30.82.781 D 2.28 3 1/2" 33.18 7/8 D 3.19 3 3/4" 35.56 1" D 3.36 112mm 48.00 26mm 3.60 4" 37.92 11/8" D POA 4 1/2" 51.60 1 1/4" D 5.14 4 3/4" 54.00 36mm 6.65 5" 60.00 1 1/2" 6.96 5 1/2" POA 1 3/4" 8.50 6" POA 2" D 12.84 6 1/2" POA 2 1/4" 13.27 7" POA 2 1/2" 18.00 8" POA 41mm 8.88 12" POA Cont Cast PB1 Hollow Price Per Inch/25mm 1 x 1/2" POA 66mm x 49mm 10.20 4"x 3" POA 1 x 3/4" POA 2 3/4 x 1" POA 4-1/2" x 1-1/POA 1 1/4 x 1/2" POA 2-3/4"x 1 1/4" POA 4 1/2 x 2" POA 1-1/4x 3/4" 4.49 2 3/4 x 1 1/2" 19.13 4-1/2"x 2 1/2POA 1 1/2 x 1/2" 6.00 2 3/4"x 1 3/4" 12.60 4-1/2"x 3" POA 1 1/2" x 3/4" POA 2-3/4"x 2" POA 4 1/2 x 3 1/2 20.78 1-1/2"x 1" 6.34 3 x 1" POA 5" x 2" POA 41mm x 19mm 6.90 3 x 1 1/4" POA 132mm x 88m 45.86 1 3/4 x 1" 9.84 3" x 1 1/2" 21.60 5"x 2 1/2" POA 1 3/4 x 1 1/4" 9.70 3"x 2" 21.46 5"x 3" 39.26 2 x 1/2" POA 3"x 2 1/4" POA 5"x 3 1/2" POA 2 x 3/4" POA 3"x 2 1/2" 16.80 5"x 4" POA 2 x 1" 12.67 3 1/4 x 1 1/2" POA 5 1/2 x 3" POA 2 x 1 1/4" 11.09 3-1/4"x 2" 22.20 5-1/2"x 3 1/2POA 2 x 1 1/2" POA 3 1/4" x 2 1/2" POA 5-1/2"x 4" POA 2 1/4 x 1" POA 3 1/2 x 1 1/2" 30.62 6 x 2" POA 2 1/4"x 1 1/4" 12.72 3-1/2"x 2" POA 6"x 3" POA 2 1/4 x 1 1/2" 10.08 3-1/2"x 2 1/4" POA 6"x 3 1/2" POA 2-1/4"x 1 3/4" POA 3-1/2"x 2 1/2" POA 6"x 4" POA 2 1/2 x 1" POA 3 3/4 x 2" 29.52 6" x 4 1/2" POA 2-1/2"x 1 1/4" POA 3-3/4"x 2 1/2" POA 7" x 4" POA 2 1/2 x 1 1/2" 13.32 4 x 1" POA 7"x 5" POA 2 1/2 x 1 3/4" POA 4"x 1 1/2" POA 8 x 5" POA 2-1/2x 2" POA 102mm x 48mm 37.20 8"x 6" POA 65mm x 30mm 19.30 4"x 2 1/2" POA We can cut squares, rectangles etc. from large diameters to customers requirements, please enquire. Page 14

Colphos 90 Colphos could be described as a Lead Bearing free machining PB102 also be sold by the Inch on request Rounds Hexagons Price Per inch/25mm Price Per Foot/300mm 1/8 D POA 9/16 D 1.08 5/32" AF 5/32" D 1.80 5/8 D 1.44 1/4" AF 3/16" D POA 3/4" D 2.04 0.324 AF 1/4" D 4.08 7/8" D 2.28 10mm AF 10.00 5/16 D 5.59 1" D POA 0.413 AF 14.16 3/8 D 8.21 1-1/8" D 4.50 7/16 AF 13.68 7/16 D 9.00 13mm AF 15.48 1/2" D 10.87 0.601 AF 21.60 3/4" AF 26.52 0.820" AF 34.56 0.937" AF 36.00 We are Currently expanding our range of Colphos If your size is not listed please enquire. Aluminium Bronze (CA104) Rounds 8mm D 7.20 1/2" D 8.26 5/8" D 14.64 7/8" D 21.91 3/4"D 16.68 1"D 30.00 Page 15

Leaded Gunmetal Gunmetal Rounds LG2 Price Per Inch/25mm Gunmetal Blocks LG2 Per 1 inch/25mm sq 1/2" 1.20 3" 22.80 7 1/2" POA 11mm Thick 2.90 5/8" 1.44 86mm 24.60 8" POA 13mm Thick 3.36 3/4" 1.80 3 1/4" 24.60 9" POA 16mm Thick 4.22 7/8" 2.10 3 1/2" 35.70 10" POA 22mm Thick 5.81 1" 4.50 91mm 35.70 11" POA 26mm Thick 6.72 1 1/8" 4.50 3 3/4" 40.50 12" POA 1 1/4" 4.56 4" 45.60 1 3/8" 4.80 4 1/4" 48.00 Blocks can be cut to 1 1/2" 5.52 4 1/2" 50.40 customers requirments 1 5/8" 6.84 4 3/4" 52.80 Please enquire. 1 3/4" 7.92 5" 60.00 2" 9.94 5 1/2" 0.00 2 1/4" 14.40 6" 88.51 2 1/2" 15.60 6 1/2" POA 2 3/4" 18.24 7" POA Gunmetal Hollows LG2 Price per inch/25mm 1" x 1/2" 2.34 3" x 1 1/2" 15.58 5" x 4" 18.91 1" x 3/4" 2.04 3" x 2" POA 5 1/2" x 3" POA 1 1/4" x 1/2" 6.00 3" x 2 1/4" POA 5 1/2" x 3 1/2" POA 1 1/4" x 3/4" 3.17 3" x 2 1/2" POA 5 1/2" x 4" POA 1 1/4" x 1" 3.00 3 1/4" x 1 1/2" 21.48 6 x 2" POA 1 1/2" x 1/2" 4.44 3 1/4" x 2" 20.86 6" x 3" POA 1 1/2" x 3/4" 4.32 3 1/4" x 2 1/4" POA 6" x 3 1/2" POA 1 1/2" x 1" 3.00 3 1/4"x 2 1/2" 15.60 6" x 4" POA 1 3/4" x 1" 5.88 3 1/4"x 2 3/4" POA 6" x 4 1/2" POA 1 3/4" x 1 1/4" 4.26 3 1/2" x 1" 28.80 6" x 5" 32.40 1 3/4" x 1 1/2" 3.83 3 1/2" x 1 1/2" 24.00 6 1/2" x 4" POA 2" x 1/2" 6.84 3 1/2" x 2" 15.17 6 1/2"x 5" POA 2" x 3/4" 9.65 3 1/2" x 2 1/4" POA 7" x 3" POA 2" x 1" 5.71 3 1/2"x 2 1/2" 10.80 7" x 4" POA 2" x 1 1/4" 6.48 3 3/4" x 2" POA 7" x 5" POA 2" x 1 1/2" 5.86 95mm x 65mm 13.66 7" x 6" POA 2" x 1 3/4" 4.86 3 3/4" x 2 1/2" 15.60 192mm x 98mm 62.40 2 1/4" x 1" 11.52 3 3/4" x 3" POA 8" x 4" POA 2 1/4" x 1 1/4" 12.26 4" x 1" 29.78 8" x 5" POA 2 1/4" x 1 1/2" 6.34 4" x 1 1/2" POA 8" x 6" POA 2 1/4" x 1 3/4" 5.86 4" x 2" 33.55 9" x 4" POA 2 1/2" x 1" POA 4"x 2 1/2" POA 9" x 5" POA 2 1/2" x 1 1/4" 12.82 4" x 3" 17.40 9" x 6" POA 2 1/2" x 1 1/2" 7.68 4" x 3 1/4" POA 9" x 7" POA 2 1/2" x 1 3/4" POA 4 1/4" x 2 1/4" 22.68 10" x 5" POA 2 1/2" x 2" POA 4 1/2" x 2" 38.40 10" x 6" POA 2 3/4" x 1" 13.20 4 1/2" x 1 1/2" 46.80 10" x 7" POA 2 3/4" x 1 1/4" POA 4 1/2" x 2 1/2" POA 10" x 8" POA 2 3/4" x 1 1/2" POA 4 1/2" x 3" 25.97 11 x 8" POA 2 3/4" x 1 3/4" POA 4 1/2" x 3 1/2" POA 12" x 6" POA 2 3/4" x 2" POA 5" x 2" 39.91 12" x 8" POA 2 3/4" x 2 1/4" 9.60 5" x 2 1/2" 44.11 12" x 9" POA 3" x 1" POA 5" x 3" 42.41 3" x 1 1/4" POA 5" x 3 1/2" POA Page 16

Nylon 66/6. Plastics. Price Per inch/25mm 6mm D 0.82 16mm D 0.14 45mm D 1.32 8mm D 0.96 20mm D 0.46 50mm D 1.68 10mm D 1.34 20mm D 0.46 60mm D 3.00 10 mm D (6) 0.72 25mm D 0.58 65mm D 3.24 12mm D 1.49 25mm D 0.58 70mm D 3.41 12mm D (6) 0.79 28mm D 0.67 75mm D 3.60 30mm D 0.77 80mm D 3.84 32mm D 0.79 90mm D 4.50 36mm D 0.84 95mm D 5.50 40mm D 1.20 100mm D 7.39 Delrin 130mm D POA 8 mm D 1.44 10 mm D 1.44 Nylon 66 available in natural or black colour. 15 mm D 2.52 20 mm D 7.68 25 mm D 10.32 Plastics can be supplied by the inch. 40 mm D 21.60 40 mm D 21.60 50 mm D 31.68 Nylatron diameters also available. 60mm D 42.24 Tufnol Price Per Inch/25mm 6mm D 0.60 8mm D 0.60 Tufnol Strip Tufnol Cut from Sheet 10mm D 0.66 Price unit as marked 12mm D 0.72 3/8" x 1/32" 0.56 4mm Thick Sq Foot 20.81 15mm D 1.44 1/2" x 1/32" 0.66 5mm Thick x 80mm Sq Inch 1.32 16mm D 1.50 7/16" x 1/32" 0.58 6mm Thick x 80mm Sq Inch 1.58 20mm D 1.56 9/16" x 1/32" 0.67 0.8 mm Thick Sq Foot 3.00 25mm D 2.64 3/4" x 1/32" 0.89 0.8 mm Thick Sq Foot 5.18 30mm D 3.48 1 mm Thick Sq Foot 7.68 35mm D 4.22 1.6 mm Thick Sq Foot 10.70 40 mm D 6.12 10mm Thick Sq Inch 0.38 PTFE Diameters Price Per Inch/25mm 6mm D 2.76 30mm D 2.02 8mm D 3.60 35mm D 2.81 10mmD 4.50 40mm D 3.60 12mmD 5.58 50mm D 4.90 15mmD 12.78 60mm D 8.26 20mm D 15.00 65mm D 9.67 25mm D 18.65 80mm D 15.72 12mm Thick Sq Inch 0.48 20mm Thick Sq Inch 0.67 Acetal Diameters Fluorosint Price Per inch/25mm Price Per inch/25mm 6mm D 1.20 20mm D 0.30 1/2" D 8.88 8mm D 1.20 25mm D 0.77 1" D 10.04 10mm D 1.20 30mm D 0.86 12mm D N 1.32 32mm D 1.00 12mm D B 1.82 15mm D 2.83 16 mm D 1.99 We stock Nylon, Perspex, Polycarbonate and Acetal sheet. Page 17

Stainless Steel. Imperial Diameters 303 Metric Diameters 303 Diameters 304 1/16" 1.10 2mm 0.72 2mm 0.86 3/32" 1.44 3mm 1.08 2.5mm 1.22 1/8" 1.44 4mm 1.14 3mm 1.20 5/32" 1.56 5mm 1.20 5/32" 0.86 3/16" 1.62 6mm 1.26 4mm 1.44 7/32" 1.80 7mm 1.80 3/16" 1.61 1/4" 1.80 8mm 1.80 5 mm D 1.75 9/32" 3.00 9mm 2.40 6 mm D 1.80 5/16" 2.04 10mm 2.40 1/4" D 1.80 3/8" 2.52 12mm 3.00 7mm D 1.86 7/16" 2.71 13mm 4.20 8 mm D 2.40 1/2" 3.17 14mm 4.20 3/8" D 2.64 9/16" 4.08 15mm 4.56 7/16" 2.76 5/8" 5.23 16mm 5.82 12mm 2.88 11/16" 5.60 17mm 6.26 1/2" D 3.24 3/4" 8.04 18mm 6.30 14mm 4.01 19mm 5/8" D 4.06 Price Per inch/25mm 16mm 4.06 7/8" 0.86 Price Per inch/25mm 17 mm D 8.11 1" 1.01 20mm 0.62 7/8" D 10.44 1-1/8" 1.54 22mm 0.79 1-1/4" 2.00 25mm 0.84 Price Per inch/25mm 1-1/2" 2.64 30mm 1.25 3/4" D 0.62 1-5/8" 2.76 35mm POA 1" D 1.15 1-3/4" 3.36 40mm 2.62 30mm 1.20 1-7/8" 3.12 45mm 2.88 35mm 2.21 2" 4.46 50mm 3.12 40mm 2.21 2-1/4" 5.83 50mm 2.93 2-1/2" 6.48 3" 9.00 3-1/4" 10.50 We also stock a range of 410,420,431 (EN57) 3-1/2" 12.00 Please enquire. 4" 16.03 4-1/4" 19.32 5" 24.20 Diameters 416 (EN56) Magnetic Diameters 316 Price Per inch/25mm Price Per Inch/25mm 1/4" 3.10 1" 1.30 1/16" POA 3/4" 0.77 5/16" 0.00 1 1/8" 1.56 1/8" 1.50 20mm 0.84 3/8" 3.54 1 1/4" 2.06 3mm 1.50 22mm 1.63 5/8" 6.00 1 1/2" 2.10 5/32" 1.50 24mm 1.80 3/4" 8.21 2" 3.34 5mm 1.50 7/8" 1.62 7/8" 11.14 6mm 1.80 1" 1.92 1/4" 2.00 1 1/8" POA 3/16" 2.40 30mm 2.28 Grades Of Stainless Steels. 8mm 2.22 35mm POA 5/16" 3.00 1 1/4" 2.28 C Cr Ni Mn Other 3/8" 3.54 1 3/8" 3.24 None Magnetic (Austenitic) 10mm 3.59 1-1/2" 3.10 303 0.12 18 9 2 7/16" 3.60 1 7/8" POA 304 0.07 18 9.5 2 12mm 4.80 40mm 4.51 310 0.15 25 20.5 2 1/2" 5.40 50mm POA 316 0.07 17 12.5 2 2.8 Mo 9/16" 6.65 2" 4.50 321 0.08 18 10.5 2 16mm 6.00 21/8" 7.80 Ferritic 2-1/2" POA 403 0.08 13 0.5 1 2-5/8" POA 430 0.08 17 0.5 1 2-3/4" POA Magnetic (Martensitic) 3" 12.60 410 0.12 12.5 1 1 5-1/2" POA 416 0.12 12.5 1 1.5 7-1/2" POA 420 0.24 13 1 1 431 0.16 16.5 2.5 1 Page 18

m-machine 01325 3581300 Stainless Steel. Hexagons 303 Hexagons 316 Squares 303 0.156" AF POA 8mm AF 6.36 3/16" 5.94 4mm AF 1.61 10mm AF 7.20 1/4" POA 0.193" AF POA 7/16" AF 7.20 5/16" POA 5mm AF 1.92 13mm AF 6.96 3/8" POA 5.5mm AF 3.36 15mm AF 7.08 7/16" POA 0.218" (7/32) POA 0.601" AF 7.08 1/2" POA 6mm AF 2.40 0.282" (7mm) 2.93 Squares 304 5/16" AF 3.07 Price Per inch/25mm.324" AF 5.18 0.71" AF 1.49 1/8" POA 3/8" AF 3.48 19mm AF 1.27 6mm 1.80 1/4" AF 3.60 0.82" AF 1.44 8mm 3.00 10mm 4.39 0.92" AF 2.28 10mm 4.50 7/16" AF 4.56 22mm AF 1.68 1/2" 5.96 0.437" AF 5.81 24mm AF POA 5/8" 6.96.445" AF 10.61 1" AF 1.80 3/4" 15.84 12mm AF 5.78 1.1" AF 1.80 1/2" AF 5.78 1.125" AF 2.16 Price Per inch/25mm 13mm AF 5.88 1.2" AF POA 16mm 0.82 0.525" AF 6.00 20mm 1.32 9/16" AF 6.84 7/8" 1.75 0.601" AF 12.00 25mm 2.10 0.710" AF 12.60 1" 2.10 5/8" AF 6.84 30mm 2.95 11/16" AF 11.52 1 1/4" 3.36 Price Per inch/25mm 50mm 4.46 3/4" AF 1.10 Squares 316.820" AF 1.10 Price Per inch/25mm 7/8" AF 1.08 1/2" Sq 8.69.920" AF 1.09 5/8" Sq 11.95 1" AF 1.20 3/4" Sq 1.32 1.100" AF 2.88 20mm Sq 1.56 1.200" AF 3.00 1 " Sq 1.87 1.300" AF 3.12 1 1/4" sq 2.90 1 3/4" Sq 6.52 We are currently expanding our stock of Whitworth and BA Stainless Hexagons in 303 & 316. If your size is not listed please enquire. We also have limited stocks of 316 Squares. Stainless Angles We have a limited range of equal angles in stock in 304 and 316 grades, Please enquire. Page 19

Stainless Steel. Stainless Flats 304 Stainless Flats 316 Stainless Sheet 304 Per sq foot/300mm sq 3mm x 12mm 1.50 3mm x 12mm 2.88 24g/.5mm 4.80 3mm x 15mm 1.56 3mm x 20mm 3.24 22g/.7mm 6.24 3mm x 20mm 1.68 3mm x 25mm 3.30 20g 7.20 3mm x 25mm 1.80 3mm x 30mm 3.72 19g/1mm 6.00 3mm x 40mm 2.52 6mm x 12mm 4.18 18g/1.2mm 7.50 3mm x 30mm 2.22 6mm x 25mm 4.80 1.5mm 7.80 3mm x 50mm 2.88 6mm x 30mm 6.02 16g/1.6mm POA 3mm x 75mm 4.38 6mm x 50mm 9.84 14g/2.0mm 12.00 5mm x 12mm 1.80 8mm x 20mm 5.71 10g/3.0mm 20.75 5mm x 20mm 2.69 4mm 24.34 5mm x 25mm 3.02 Price Per inch/25mm 6mm POA 5mm x 30mm 3.30 10mm x 40mm 0.96 1/4" POA 5mm x 40mm 4.50 12mm x 25mm 1.06 5mm x 50mm 7.46 20mm x 100mm 6.19 Stainless Sheet 316 5mm x 75mm 9.24 25mm x 75mm 6.60 Per sq foot/300mm sq 6mm x 12mm 1.92 2mm 16.80 6mm x 15mm 2.50 0.5mm 5.70 6mm x 20mm 3.48 0.9mm 10.51 6mm x 25mm 3.72 3mm 21.60 Price Per inch/25mm 6mm x 30mm 0.42 10mm x 40mm 0.84 6mm x 40mm 0.54 10mm x 50mm 0.96 6mm x 50mm 0.60 12mm x 20mm 0.72 6mm x 75mm 0.96 12mm x 25mm 0.77 6mm x 100mm 1.10 12mm x 40mm 0.86 8mm x 20mm 0.48 12mm x75mm 1.92 8mm x 25mm 0.52 12mm x100mm 2.04 Imperial Flats are no longer available 8mm x 30mm 0.60 15mm x100mm 3.17 or are difficult to obtain. 8mm x 40mm 0.70 20mm x 40mm 1.82 8mm x 50mm 0.80 20mm x 50mm 2.11 8mm x 80mm 1.32 20mm x 75mm 3.12 10mm x 20mm 0.46 25mm x 50mm 2.66 10mm x 25mm 0.60 25mm x 75mm 4.13 6mm 41.76 Page 20

Stainless Steel. Stainless Tube. 316 Stainless Tube 304 Price Per Foot/300mm 1/16" OD x 33swg 8.18 3/16" OD x 22swg 3.26 1/16" OD x 30swg 7.97 6mm OD x 1.5mm wall 2.16 1/16" OD x 27swg 8.27 1/4" OD x 20swg POA 1/16" OD x 24swg 7.63 5/16" OD x 18swg POA 3/32" OD x 30swg 6.58 5/16" OD x 20swg POA 3/32" OD x 27swg 7.78 3/8" OD x 16swg POA 1/8" OD x 30swg 8.40 7/16" OD x 20swg POA 1/8" OD x 26swg 7.73 1/2" OD x18swg 3.30 1/8" OD x 24swg 4.35 1/2" OD x20swg 4.20 1/8" OD x 22swg 4.39 5/8" OD x16swg POA 1/8" OD x 20swg 4.51 5/8" OD x18swg 5.52 5/32" OD x 33swg 7.20 3/4" OD x18swg 3.00 5/32" OD x 27swg 3.00 3/4" OD x16swg 3.00 5/32" OD x 24swg 4.75 25mm ODx1.5mm 3.00 3/16" OD x 27swg 7.80 25mm ODx3mm 4.42 3/16" OD x 24swg 3.30 11/4" NB SCH 40 21.98 3/16" OD x 22swg 3.60 11/2" NB SCH 40 24.00 3/16" OD x 20swg POA 6mm x 1.0mm 5.77 Price Per inch/25mm 1/4" OD x 22swg 4.20 1" OD x 20swg POA 1/4" OD x 20swg 4.20 26.9 x 2mm wall 0.50 1/4" OD x 16swg 5.86 32 OD x 1.5 0.50 5/16" OD x 22swg 4.61 1 1/4" OD x 20swg 1.15 5/16"OD x 20swg 5.10 1 1/4" OD x 16swg 0.65 5/16"OD x 18swg 5.16 1 1/2" OD x 1.5mm 0.65 8mm x 1.0mm 5.72 1 1/2" OD x 10swg POA 3/8" OD x 22swg 3.00 1 1/2" OD x 3mm wall 0.74 3/8" OD x 20swg 4.56 1 3/4" OD x 10swg POA 3/8" OD x 18swg 4.32 45mm x 1.5 wall 0.65 3/8" OD x 16swg 4.50 1.9" OD x 1 1/2" bore 1.08 7/16"OD x 20swg 4.20 2" OD x 3mm wall 0.96 7/16" OD x 16swg 6.12 2-3/8" x 16swg 0.60 12mm x 1.5wall 10.96 2-1/2" OD x16swg 0.60 1/2" OD x 22swg 3.46 70mm x 2mm wall 0.72 1/2" OD x 20swg 3.60 2 7/8"ODx 5.5mmwall 1.20 1/2" OD x 18swg 4.80 3" x 16swg 1.00 1/2" OD x 16swg 4.80 4" OD x 16swg 1.08 15mm OD x 1.5 15.60 4" OD x 3mm wall 1.80 16mm OD x 1.5 6.18 5/8" OD x 18swg 6.90 5/8" OD x 16swg 7.32 5/8" OD x 10swg 15.19 3/4" OD x 16swg 6.90 3/4" OD x 18swg 6.60 25mm x 2mm wall 8.64 Page 21

Steel Rounds. Bright Steel Imperial EN1A (230M07) Bright Steel Metric EN1A (23M07) Price Per Inch/25mm Price Per inch/25mm 1/16" POA 1 3/8" 9.02 2mm 1.00 24mm 3.30 3/32" 1.00 1-3/8"Pb 9.02 3mm 1.00 25mm 4.08 1/8" 1.00 1 1/2" 9.36 4mm Pb 1.00 28mm 5.74 5/32" 1.00 1-1/2" Pb 10.56 5mm 1.00 30mm 6.36 3/16" 1.00 1 5/8" 0.98 6mm 1.00 32mm 7.56 7/32" 1.00 1 3/4" 1.20 7mm Pb 1.87 35mm 8.30 1/4" 1.00 1 3/4" Pb 1.20 7mm 1.00 36mm 8.86 1/4" Pb 1.00 1 7/8" 1.02 8mm 1.00 40mm 1.03 9/32" 1.00 2" 1.32 9mm 1.20 45mm 1.14 5/16" 1.00 2 1/8" 1.44 10 mm Pb 1.44 50mm 1.37 3/8" 1.00 2 1/4" 2.00 10 mm 1.32 55mm 1.57 3/8" Pb 1.08 2 1/4" Pb 2.04 11mm 2.28 60mm 2.18 7/16" 1.02 2 3/8" 2.11 12mm 2.30 65mm 2.45 1/2" 1.08 2 1/2" Pb 2.06 13mm 2.32 70mm 2.95 9/16" 1.32 2 1/2" 2.16 14mm 2.33 75mm 3.84 9/16" Pb 3.36 2 5/8" 2.64 15mm 2.34 90mm 4.80 5/8" 1.78 2 3/4" 2.70 16mm 2.38 100mm 5.70 5/8" Pb 1.82 2 7/8" 3.00 17mm 2.46 105mm 6.30 11/16" 2.18 3" 3.30 18mm 2.70 110mm 6.62 3/4" 2.30 3 1/4" 4.32 20mm 2.76 125mm 7.49 13/16" 2.82 3 1/2" 5.04 22mm 3.22 130mm 8.40 7/8" 2.88 3 3/4" 6.00 7/8" Pb 2.94 4" 6.90 15/16" 3.78 4 1/4" 7.80 1" 3.98 4 1/2" 9.00 EN1A is a free machining steel for general purpose. 1"Pb 4.20 4 3/4" 9.30 1-1/16" 4.62 5" 10.00 (*Pb denotes high lead content) 1-1/8" 4.98 5 1/2" 10.98 1 3/16" 6.00 6 " 12.00 1 1/4" 6.30 6 1/2" POA 1 1/4" Pb 6.36 7" 21.60 1 5/16" 7.80 Bright Steel Imperial EN3 (080A15) Bright Steel Metric EN3 (080A15) Price Per inch/25mm Price Per inch/25mm 1/8" 1.00 1-3/8" 7.32 3mm 1.00 25mm 4.20 3/16" 1.00 1-1/2" 9.53 4mm 1.00 30mm 6.00 1/4" 1.00 1-5/8" 0.96 6mm 1.00 35mm 0.74 5/16" 1.00 1-3/4" 1.01 8mm 1.00 40mm 0.84 3/8" 1.00 2" 1.44 10mm 1.56 45mm 1.25 7/16" 1.44 2-1/4" 1.94 12mm 1.62 50mm 1.26 1/2" 1.50 2-3/8" 3.47 14mm 1.68 60mm 1.68 9/16" 1.80 2-1/2" 2.22 15mm 1.86 65mm 1.86 5/8" 2.04 2-3/4" 2.50 16mm 2.00 90 mm 4.32 3/4" 2.40 3" 3.29 17mm 2.23 100 mm 7.50 7/8" 2.88 3-1/4" 3.60 18mm 2.34 120mm 9.00 1 " 4.70 4" 4.80 20mm 3.24 150mm 11.34 1-1/8" 5.38 4 1/2" 6.41 22mm 3.60 200mm 37.61 1-1/4" 5.76 6-1/2" 20.71 24mm 3.90 Black EN3 (070M20) Price Per inch/25mm 6mm D 1.00 50mm D 1.08 130mm D 8.63 200mm D 19.20 8mm D 1.02 65mm D 2.00 150mm D 10.04 210mm D 20.40 10mm D 1.08 70mm D 3.37 160mm D 10.20 220mm D 24.82 12mm D 1.14 90 mm D 4.74 170 mm D 11.77 240 mm D 26.40 16mm D 1.20 105 mm D 6.85 180mm D 12.00 260 mm D 27.96 20mm D 1.46 110mm D 7.12 185 mm D 13.20 280 mm D POA 22mm D 2.10 120mm D 7.38 190 mm D 15.70 300 mm D POA 25mm D 2.40 Page 22

Steel Rounds. Bright Steel Imperial EN8 (080M40) Bright Steel Metric EN8 (080M40) Price Per inch/25mm Price Per inch/25mm 1/4" 1.30 1 3/8" 9.30 5mm 1.20 30mm 5.62 5/16" 1.34 1 1/2" 9.79 6mm 1.56 40mm 0.86 3/8" 1.49 1-1/2" PB 11.11 8mm 1.56 50mm 1.50 3/8" PB 2.64 1 5/8" 1.08 10mm 1.56 55mm 1.74 7/16" 1.99 1 3/4" 1.18 12mm 1.66 60mm 2.40 1/2" 2.04 2" 1.32 16mm 1.68 65mm 2.81 1/2" PB 3.17 2 1/8" 2.23 20mm 2.78 70mm 2.88 9/16" 2.28 2 1/4" 2.23 25mm 5.04 100mm 4.99 5/8" 2.82 2-1/4" PB 2.23 5/8" PB 3.98 2 3/8" 2.34 11/16" 2.40 2 1/2" 2.40 3/4" 2.54 2-5/8" 3.48 3/4" 4.75 2 3/4" 3.42 7/8" 4.51 3" 3.48 1" 4.80 3-1/2" 3.60 Bright Steel Metric EN24T (817M40) 1" PB 6.90 4" 5.16 Price Per inch/25mm 1 1/8" 7.44 4-1/4" 5.58 10mm 2.94 40mm 1.80 1 1/4" 8.95 5" 8.40 12mm 4.37 50mm 2.16 16mm 4.80 80mm 3.79 Bright Steel Imperial EN24T (817M40) 20mm 6.98 155mm POA Price Per inch/25mm 25mm 7.14 180mm POA 1/4" 1.98 11/8" 12.60 30mm 9.96 260mm POA 5/16" 2.40 1 1/4 " 12.90 3/8" 2.94 1 3/8" 13.18 1/2" 3.00 1 1/2" 16.08 5/8" 4.10 1 5/8" 1.56 3/4" 8.88 1 3/4" 2.04 7/8" 9.36 2" 2.64 1" 9.74 3" 4.20 EN40B (Nitriding Steel) Bright Steel Rounds EN16T (605M36) Price Per Foot/300mm Price Per inch/25mm Price Per inch/25mm 25mm D 10.51 80mm D 6.07 1/4" 2.10 1 1/4" 11.40 32mm D 11.90 10mm 4.20 1 3/8" 12.00 12mm 4.20 35mm 11.40 1/2" 3.60 1 1/2" 16.27 9/16" 3.90 1 3/4" 1.56 5/8" 4.20 2" 2.16 We have limited stock of EN8DM (212A42) Free machining. 3/4" 4.50 55mm 2.45 EN8 Black diameters and EN19A (708M40) 20mm 4.50 60mm 2.52 Please enquire. 7/8" 6.00 70mm 2.71 25mm 6.00 3" 3.12 1" 10.90 85mm POA 30mm 8.75 90mm 4.10 Page 23

Steel Rounds Continued. EN 19 1/4" D 4.68 1 1/4" D 9.06 Precision Ground EN1A Rounds 1/4" D 5.80 6mm D 2.40 5/16" D 5.94 8mm D 4.50 3/8" D 7.44 10mm D 5.98 7/16" D 6.00 12mm D 6.00 1/2" D 6.87 16mm D 9.30 5/8" D 8.40 20mm D 9.60 11/16" D 14.40 25mm D 16.02 3/4" D 12.36 30mm D 16.20 7/8" D 13.63 35mm D 19.58 1" D 18.02 40mm D 21.00 1-1/8" D 18.24 1-1/4" D 19.44 1-1/2" D 20.64 Also Limited stock of EN31 & EN36 Page 24

Steel Flats. Imperial Bright Flats EN32B (080A15) Price Per Foot/300mm 1/16" x 1/4" 1.00 3/16" x 1" 2.34 5/16" x 3/4" 2.40 1/2" x 3/4" 3.00 1/16" x 3/8" 1.00 3/16" x 11/4" 2.88 5/16" x 7/8" 3.86 1/2" x 7/8" 3.06 1/16" x 1/2" 1.00 3/16" x 1 1/2" 3.00 5/16" x 1" 3.90 1/2" x 1" 3.12 1/16" x 5/8" 1.00 3/16" x 1 3/4" 3.41 5/16" x 1 1/4". 4.02 1/2" x 1 1/4" 3.26 1/16" x 3/4" 1.00 3/16" x 2" 3.60 5/16" x 1 1/2" 4.08 1/2" x 1 1/2" 4.75 1/16" x 1" 1.01 3/16" x 2 1/4" 3.90 5/16" x 2" 5.52 1/2" x 1 3/4" 4.80 1/16" x 1 1/4" 1.03 3/16" x 2 1/2" 4.20 5/16" x 2 1/2" 5.70 1/2" x 2" 7.44 1/16" X 1 1/2" 1.06 3/16" x 3" 7.39 5/16" x 3" 11.11 1/2" x 2 1/4" 8.21 1/16" x 2" 1.08 3/16" x 4" 9.24 5/16" x 4" 12.00 1/2" x 2 1/2" 9.17 1/16" x 21/2" 1.14 3/16" x 6" 14.40 5/16" x 5" 13.20 1/2" x 3" 10.30 1/16" x 3" 1.19 1/4" x 3/8" 1.22 5/16" x 6" 13.44 1/2" x 31/2" 13.20 1/16" x 4" 1.36 1/4" x 1/2" 1.32 3/8" x 1/2" 1.62 1/2" x 4" 13.44 1/8" x 1/4" 1.00 1/4" x 5/8" 1.44 3/8" x 5/8" 2.16 1/2" x 5" 14.40 1/8" x 3/8" 1.00 1/4" x 3/4" 1.56 3/8" x 3/4" 2.22 1/2" x 6" 19.37 1/8" x 1/2" 1.00 1/4" x 7/8" 2.23 3/8" x 7/8" 2.57 5/8" x 3/4" 4.56 1/8" x 5/8" 0.90 1/4" x 1" 2.26 3/8" x 1" 2.64 5/8" x 1" 4.62 1/8" x 3/4" 1.08 1/4" x 1 1/4" 2.59 3/8" x 1 1/4" 3.84 5/8" x 1 1/4" 5.04 1/8" x 7/8" 1.10 1/4" x 1 1/2" 2.76 3/8" x 1 1/2" 4.44 5/8" x 1 1/2" 5.94 1/8" x 1" 1.44 1/4" x 1 3/4" 3.12 3/8" x 1 3/4" 5.26 5/8" x 1 3/4" 6.30 1/8" x 1 1/4" 1.61 1/4" X 2" 3.70 3/8" x 2" 5.40 5/8" x 2" 8.64 1/8" x 1 1/2" 2.11 1/4" x 2 1/4" 5.66 3/8" x 2 1/4" 4.62 5/8" x 21/2" 11.52 1/8" x 1 3/4" 2.78 1/4" x 2 1/2" 5.70 3/8" x 2 1/2" 5.52 5/8" x 3" 12.00 1/8" x 2" 2.82 1/4" x 3" 5.94 3/8" x 3" 6.12 5/8" x 4" 14.88 1/8" x 2 1/2" 3.36 1/4" x 31/2" 6.90 3/8" x 31/2" 11.40 5/8" x 5" 22.90 1/8" x 3" 4.68 1/4" x 4" 7.44 3/8" x 4" 12.00 5/8" x 10" 46.20 1/8" x 4" 4.99 1/4" x 5" 9.26 3/8" x 41/2" 12.53 3/4"x7/8" 4.54 1/8" x 6" 7.20 1/4" x 6" 14.78 3/8" x 5" 12.60 3/4" x 1" 4.92 3/16" x 3/8" 1.20 1/4" x 7" 16.60 3/8" x 6" 15.96 3/4" x 1 1/4" 7.39 3/16" x 1/2" 1.50 1/4" x 8" 16.74 3/8" x 7" 16.50 3/4" x 1 1/2" 7.44 3/16" x 5/8" 1.63 1/4" x 12" 25.20 3/8" x 8" 17.34 3/16" x 3/4" 1.66 5/16" x 1/2" 1.80 3/8" x 10" 33.84 3/16" x 7/8" 2.28 5/16" x 5/8" 2.04 1/2" x 5/8" 2.90 Price Per inch/25mm 3/4" x 1 3/4" 0.60 1" x 1 1/2" 0.84 1-1/4" x 1-1/2" 1.08 1 3/4" x 2 " 2.16 3/4" x 2" 0.96 1" x 1 3/4" 0.90 1 1/4" x 1 3/4" 1.25 1 3/4" x 2 1/2" 2.40 3/4" x 21/4" 1.03 1" x 2 " 0.97 1 1/4" x 2" 1.32 2" x 2 1/2" 2.64 3/4" x 21/2" 1.13 1" x 2-1/4 " 1.30 1-1/4" x 2-1/4" 1.68 2" x 3" 3.89 3/4" x 3" 1.15 1" x 2 1/2" 1.44 1-1/4" x 2-1/2" 1.92 2" x 3 1/2" 4.13 3/4"x3-1/2" 1.42 1" x 3" 1.68 1 1/4" x 3" 2.16 2" x 5" 5.64 3/4" x 4" 1.70 1" x 4" 1.99 1 1/4" x 4" 2.40 2-1/2" x 3" 4.32 3/4" x 5" 2.42 1" x 5" 2.57 1 1/4" x 12" 10.50 2-1/2" x 4" 5.35 3/4" x 6" 3.17 1" x 7" 3.60 1 1/2" x 2" 1.78 3" x 5" 8.48 7/8" x 1" 0.60 1" x 8" 4.20 1 1/2" x 2 1/2" 1.92 1" x 1 1/4" 0.72 1" x 12" 8.40 1 1/2" x 3" 2.15 EN8 Imperial Bright Flats. 3/8 "X 1 1/2" 15.12 3/8 " X 2" 16.80 NOTE: 1/16" thickness are cut from sheet. Page 25

Metric Bright Flats EN32B (080A15) Price Per Foot/300mm Steel Flats. 3mm x 10mm 1.08 6mm x 50mm 2.71 10mm x 40mm 4.78 12mm x 200mm 25.20 3mm x 12mm 1.14 6mm x 60mm 3.00 10mm x 50mm 4.92 15mm x 30mm POA 3mm x 16mm 1.32 6mm x 65mm 3.65 10mm x 60mm 8.23 15mm x 70mm POA 3mm x 20mm 1.34 6mm x 70mm 4.25 10mm x 65mm 8.04 16mm x 20mm 3.60 3mm x 25mm 1.37 6mm x 75mm 4.61 10mm x 70mm 8.28 16mm x 25mm 4.80 3mm x 32mm 1.01 6mm x 80mm 4.68 10mm x 80mm 8.64 16mm x 30mm 5.36 3mm x 40mm 1.25 6mm x 90mm 4.92 10mm x 90mm 9.58 16mm x 32mm 5.70 3mm x 50mm 1.70 6mm x 100mm 5.42 10mm x 100mm 9.60 16mm x 35mm 6.24 3mm x 60mm 1.96 6mm x 125mm 9.36 10mm x 110mm 9.90 16mm x 40mm 7.20 3mm x 80mm 2.59 8mm x 12mm 1.80 10mm x 125mm 13.44 16mm x 45mm 7.20 5mm x 10mm 1.08 8mm x 15mm 1.92 10mm x 150mm 15.12 16mm x 50mm 7.32 5mm x 12mm 1.26 8mm x 20mm 2.04 12mm x 16mm 1.54 16mm x 60mm 11.57 5mm x 16mm 1.27 8mm x 25mm 2.16 12mm x 20mm 2.09 16mm x 65mm 11.64 5mm x 20mm 1.32 8mm x 30mm 2.35 12mm x 25mm 2.64 16mm x 70mm 11.70 5mm x 25mm 1.44 8mm x 40mm 2.71 12mm x 30mm 3.36 16mm x 75mm 11.76 5mm x 30mm 1.92 8mm x 45mm 3.31 12mm x 32mm 3.72 16mm x 80mm 12.72 5mm x 40mm 1.98 8mm x 50mm 3.84 12mm x 35mm 4.08 16mm x100mm 13.87 5mm x 50mm 2.35 8mm x 60mm 3.96 12mm x 40mm 4.85 20mm x 25mm 4.50 5mm x 60mm 2.74 8mm x 70mm 5.11 12mm x 50mm 5.42 20mm x 30mm 5.40 5mm x 100mm 6.72 8mm x 75mm 6.38 12mm x 60mm 6.19 20mm x 32mm 5.70 6mm x 10mm 1.20 8mm x 100mm 9.60 12mm x 70mm 7.98 20mm x 35mm 7.20 6mm x 12mm 1.26 8mm x 150mm 13.44 12mm x 75mm 8.10 20mm x 40mm 7.32 6mm x 16mm 1.42 10mm x 12mm 4.43 12mm x 80mm 8.22 20mm x 45mm 8.09 6mm x 20mm 1.44 10mm x 16mm 2.16 12mm x 90mm 10.70 20mm x 50mm 9.12 6mm x 25mm 1.50 10mm x 20mm 2.22 12mm x 100mm 10.87 20mm x 60mm 12.48 6mm x 30mm 1.92 10mm x 25mm 2.40 12mm x 125mm 13.25 20mm x 65mm 12.78 6mm x 35mm 1.98 10mm x 30mm 3.17 12mm x 150mm 15.48 6mm x 40mm 2.16 10mm x 35mm 3.17 12mm x 160mm 17.06 Price Per inch/25mm 20mm x 70mm 1.08 25mm x 80mm 1.39 20mm x 80mm 1.32 25mm x 100mm 1.44 20mm x 90mm 1.44 30mm x 40mm 0.90 20mm x100mm 1.66 30mm x 45mm 1.03 20mm x120mm 1.67 30mm x 50mm 1.08 20mm x125mm 2.23 30mm x 60mm 1.34 20mm x150mm 2.54 30mm x 70mm 1.56 20mm x200mm 3.31 30mm x 80mm 2.52 20mm x 300mm 8.88 30mm x 90mm 2.58 25mm x 30mm 0.60 30mm x 100mm 2.64 25mm x 32mm 0.79 30mm x 150mm 3.67 25mm x 35mm 0.84 40mm x 45mm 1.73 25mm x 40mm 0.90 40mm x 50mm 1.80 25mm x 45mm 0.94 40mm x 60mm 2.10 25mm x 50mm 0.96 40mm x 65mm 2.28 25mm x 60mm 0.98 40mm x 70mm 2.90 25mm x 65mm 1.08 40mm x 90mm 3.11 Page 26