motion solutions for leisure, mobility and industrial applications

Transcription

1 motion solutions for leisure, mobility and industrial applications

2 designed for application bespoke DC gear-motor solutions 2 STAIR LIFT unique worm-spur double reduction gearbox delivering 124Nm of torque in compact design WHEELCHAIR POWER ASSIST sealed worm gearbox with de-clutch and brake options POWERED GOLF CADDY lightweight worm plastic gearbox with hollow shaft option MOBILITY SCOOTER / GOLF RIDE-ON robust gearbox with black powder-coated finish, brake and special shaft POWERED GOLF CADDY lightweight plastic gearbox with differential gearing for improved manoeuvrability DOOR OPENER PM44-50 fitted with spade connectors and compact worm gearbox CARAVAN MOVER bespoke worm unit with ergonomic chassis and integrated housing for easy installation FLOOR CLEANER rare-earth motor fitted with long-life sealed worm gearbox and brake MOBILITY AID worm gearbox with 3-point fixing for wheelchair vehicle access winch For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

3 PM44-25 / PM44-38 / PM44-50 permanent magnet DC motor standard motor configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 180 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; 300mm flying leads; maximum shaft diameter 8mm EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness; spade connectors PM44-25 PM44-38 PM44-50 Power (W) Torque (Nm) Power (W) Torque (Nm) Power (W) Torque (Nm) ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. This motor may be coupled with many of our standard worm, spur and planetary gearboxes. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

4 MAX OUTPUT SHAFT 87.8 drawing for PM44-25 / PM44-38 / PM44-50 permanent magnet DC motor OPTIONAL OUTPU 4 SUIT CUSTOMER REQUIREMENTS ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE SPECIFIED # DO NOT SCALE DRAWING # IF IN DOUBT ASK # REMOVE ALL BURRS AND SHARP EDGES # UNLESS OTHERWISE STATED THIS DRAWING IS UNCONTROLLED REFER TO FILE FOR CURRENT ISSUE DRG No standard motor configured and customised for your application 44KN-2010 DIRECTION OF ROTATION DIM 'A' BLACK LEAD BRUSH ASSY 48.0 M5 FLUSH THREAD INSERTS ON A 41.3 PCD IN 4 POSITIONS AS SHOWN TUBE JOIN x M5 x RED LEAD BRUSH ASSY NOTE: WITH THE BRUSH LEAD ASSEMBLYS IN THE POSITIONS AS SHOWN THIS WILL GIVE A CLOCK WISE ROTATION AT THE DRIVE END OF THE MOTOR. MA 1 NB1157 ISSUED FOR PRODUCTION LB PA ISS CN CHANGE DRN DATE CHKD KINGS ROAD, HALSTEAD ESSEX, C09 1HL, UK PH FAX Motor Type Motor Weight DIM A (mm) TOLERANCE UNLESS OTHERWISE STATED MATERIAL Totally Enclosed Ventilated XX = 0.5 FINISH PM kg XX.XX = 0.1 BURRS & SCRATCHES PM kg PM kg DIMS XX.X = 0.25 CLEAN& FREE FROM TITLE PM44 MOTOR PM CUS-NB-NA THIS DRAWING IS SOLE PROPERTY OF E.M.D. WITHOUT WHOSE WRITTEN PERMISSION IT MUST NOT BE COPIED, REPRODUCED OR SHOWN TO THIRD PARTIES. DRG No SCALE 44KN :1 A3 For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Compan

5 PM50-38 / PM50-50 / PM50-63 permanent magnet DC motor 5 standard motor configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 450 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors; maximum shaft diameter 9.5mm EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness; shaft at both ends PM50-38 PM50-50 PM50-63 Power (W) Torque (Nm) Power (W) Torque (Nm) Power (W) Torque (Nm) ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. This motor may be coupled with many of our standard worm, spur and planetary gearboxes. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

6 drawing for PM50-38 / PM50-50 / PM50-63 permanent magnet DC motor 6 standard motor configured and customised for your application DIM A OUTPUT SHAFT TO SUIT CUSTOMER REQUIREMENT 4 x M6 x MAX OUTPUT SHAFT OPTIONAL HOLDING BRAKE Motor Type Motor Weight DIM A (mm) Totally Enclosed Ventilated PM kg PM kg PM kg PM kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3024 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any Buyer, number to alter of mechanical, any such matters electrical, and environmental to supply the or even Goods aesthetic so altered, requirements provided in order that such to realise alteration their preferred shall not motor-gearbox materially affect solution. the characteristics To find out more please of the contact Goods. a member of our sales team on +44 (0) or visit our website at for further information.

7 PM50-38 / PM50-50 / PM50-63 with GB4 gearbox standard motor-gearbox configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 450 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 50:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 20mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life; cushioned 3-piece coupling; steel output shaft with 2 ballbearings OPTIONS Stainless steel shaft; black finish; dog clutch Power (W) PM50-38GB4 PM50-50GB4 RE50-63GB4 Gearbox GB4 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % % % * 22.2* * % * 22.1* * 29.3* * 35.9* 75 74% % % % % * % * * % * * 34.3* * 42.1* 60 76% * 33.9* * 45.0* % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB4 gearbox is available as an MRO product; for new applications we recommend the GB12 gearbox instead, which offers improved performace with similar dimensions. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

8 * * % PM50-38 / PM50-50 / PM50-63 with GB4 gearbox * *35.1 * *43.3 * % *34.7 * *45.8 * % standard motor-gearbox configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice 8 Graphs are available showing the motor performance throughout the speed range. Contact us for more information. Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.0 kg 1.4 kg PM kg 1.0 kg 1.4 kg PM kg 1.0 kg 1.4 kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3012 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the For customers Buyer, to who alter require any such in excess matters of 5000 and units to supply per year the we Goods offer a so totally altered, bespoke provided design service that such to fit alteration the application; shall not at zero materially cost premium. affect the This characteristics service enables of customers the Goods. to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

9 PM50-38 / PM50-50 / PM50-63 with GB12 gearbox standard motor-gearbox configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 450 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 50:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 25mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life - maintenance free; cushioned 1-piece coupling; steel output shaft with 2 ball-bearings OPTIONS Stainless steel shaft; black finish; de-clutch Power (W) PM50-38GB12 PM50-50GB12 PM50-63GB12 Gearbox GB12 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % % % *22.6 * * % *22.7 * *29.7 * *36.8 * % % % % % * % * * % * *35.1 * *43.3 * % *34.7 * *45.8 * % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB12 gearbox may be coupled with many of our other standard AC or DC motors. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

10 * * % drawing for PM50-38 / PM50-50 / PM50-63 with GB12 gearbox * *35.1 * *43.3 * % *34.7 * *45.8 * % standard motor-gearbox configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice 10 Graphs are available showing the motor performance throughout the speed range. Contact us for more information. Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the Buyer, to alter any such matters and to supply the Goods so altered, provided that such alteration shall not materially affect the characteristics of the Goods. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

11 PM63-50 / PM63-75 / PM permanent magnet DC motor 11 standard motor configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors; maximum shaft diameter 12mm EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness; shaft at both ends PM63-50 PM63-75 PM Power (W) Torque (Nm) Power (W) Torque (Nm) Power (W) Torque (Nm) ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. This motor may be coupled with many of our standard worm, spur and planetary gearboxes. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

12 drawing for PM63-50 / PM63-75 / PM permanent magnet DC motor 12 standard motor configured and customised for your application DIM A 4 x M6 x 1.0-6H OUTPUT SHAFT TO SUIT CUSTOMER REQUIREMENTS MAX OUTPUT SHAFT MOTOR BODY DIAMETER 90mm OPTIONAL HOLDING BRAKE Motor Type Motor Weight DIM A (mm) Totally Enclosed Ventilated PM kg PM kg PM kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3025 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose For customers (whether who by require the in Buyer excess or of by 5000 any units third per party) year we and offer that a totally the goods bespoke are design not service adversely to fit affected the application; by any at items zero cost used premium. in their This installation. service enables The customers Company to reserves outline the right, without notification to the Buyer, any number to alter of any mechanical, such matters electrical, and environmental to supply the or even Goods aesthetic so altered, requirements provided in order that to such realise alteration their preferred shall not motor-gearbox materially solution. affect the To find characteristics out more please of contact the Goods. a member of our sales team on +44 (0) or visit our website at for further information.

13 PM63-50 / PM63-75 / PM with GB4 gearbox 13 standard motor configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION up to IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 50:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 20mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life; cushioned 3-piece coupling; steel output shaft with 2 ballbearings OPTIONS Stainless steel shaft; black finish; dog clutch Power (W) PM63-50GB4 PM63-75GB4 RE63-100GB4 Gearbox GB4 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % * * % * 32.5* * 39.4* * 39.6* 50 78% * 46.5* * 50.6* * 63.8* 60 76% * 58.3* * 74.3* * 81.0* 75 74% % % % * 14.6* * % * 25.6* * 33.1* * 31.8* 30 84% * 46.5* * 60.1* * 57.9* 50 78% * * % * % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB4 gearbox is available as an MRO product; for new applications we recommend the GB12 gearbox instead, which offers improved performace with similar dimensions. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

14 * * % PM63-50 / PM63-75 / PM with GB4 gearbox * % standard motor configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice 14 Graphs are available showing the motor performance throughout the speed range. Contact us for more information. Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.0 kg 1.4 kg PM kg 1.0 kg 1.4 kg PM kg 1.0 kg 1.4 kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3014 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the Buyer, For customers to alter any who such require matters in excess and of 5000 to supply units per the year Goods we offer so altered, a totally provided bespoke design that such service alteration to fit the shall application; not materially zero cost affect premium. the characteristics This service enables of the customers Goods. to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

15 PM63-50 / PM63-75 / PM with GB9 gearbox 15 standard motor-gearbox configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION up to IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 25mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life - maintenance free; cushioned 1-piece coupling; steel output shaft with 2 ball-bearings OPTIONS Stainless steel shaft; black finish; dog clutch Power (W) PM63-50GB9 PM63-75GB9 PM63-100GB9 Gearbox GB9 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % * * * % *33.3 * *41.5 * *40.7 * % *47.7 * *53.3 * *65.5 * % *60 * *76.3 * *86.2 * % % % % *15 * * % *26.3 * *33.9 * *32.7 * % *47.7 * *61.6 * *59.4 * % *69.2 * *80.9 * *94 * % *103.2 * * * % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB9 gearbox may be coupled with many of our other standard AC or DC motors. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

16 SAL3017 ISSUE 1 drawing (assuming for PM V supply) / PM63-75 / PM with GB9 gearbox *Gearbox life may be less than 5000 hours. Contact us for application advice 16 standard motor-gearbox configured and customised for your application Graphs are available showing the motor performance throughout the speed range. Contact us for more information. Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements All For information customers who (including require in without excess of limitation 5000 units figures) per year given we offer by a totally the Company bespoke design relating service to to the fit performance the application; of at the zero Goods, cost premium. is based This service upon the enables Company s customers to experience outline but the Company shall accept no any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member liability of our should sales team it prove on +44 to (0)1202 be in 512 any 575 way or visit inaccurate. our website It at shall be the responsibility for further of information. the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the

17 PM63-50 / PM63-75 / PM with GB12 gearbox 17 standard motor-gearbox configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 50:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 25mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life - maintenance free; cushioned 1-piece coupling; steel output shaft with 2 ball-bearings OPTIONS Stainless steel shaft; black finish; de-clutch Power (W) PM63-50GB12 PM63-75GB12 PM63-100GB12 Gearbox GB12 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % * * * % *33.3 * *41.5 * *40.7 * % *47.7 * *53.3 * *65.5 * % *60 * *76.3 * *86.2 * % % % % *15.0 * * % *26.3 * *33.9 * *32.7 * % *47.7 * *61.6 * *59.4 * % *69.2 * *80.9 * *94 * % *103.2 * *122.6 * *132 * % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB12 gearbox may be coupled with many of our other standard AC or DC motors. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

18 % drawing for PM63-50 / PM63-75 / PM with GB12 gearbox % % standard motor-gearbox configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice 18 Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg Motor body diameter 90mm All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3015 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the For Buyer, customers alter who any require such in matters excess of and 5000 to units supply per year the Goods we offer so a totally altered, bespoke provided design that service such to alteration fit the application; shall not materially zero cost affect premium. the This characteristics service enables of the customers Goods. to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

19 PM / PM / RE (rare earth) permanent magnet DC motor 19 standard motor configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite or rare-earth Neodynium (NdFeB) magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; spade connectors; maximum shaft diameter 12mm EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness; shaft at both ends PM PM RE Power (W) Torque (Nm) Power (W) Torque (Nm) Power (W) Torque (Nm) ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. This motor may be coupled with many of our standard worm, spur and planetary gearboxes. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

20 drawing for PM / PM / RE (rare earth) permanent magnet DC motor 20 standard motor configured and customised for your application DIM A OUTPUT SHAFT TO SUIT CUSTOMER REQUIREMENTS LEAD TO SUIT CUSTOMER REQUIREMENT 50 4 x M6 x 1.0-6H 97 MAX OUTPUT SHAFT Motor Type Motor Weight DIM A (mm) Totally Enclosed Ventilated PM kg PM kg RE kg MOTOR BODY DIAMETER 90mm OPTIONAL HOLDING BRAKE All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3031 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the For Buyer, customers alter who any require such in matters excess of and 5000 to units supply per year the Goods we offer so a totally altered, bespoke provided design that service such to alteration fit the application; shall not materially zero cost affect premium. the This characteristics service enables of the customers Goods. to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

21 PM / PM / RE (rare earth) with GB4 gearbox 21 standard motor configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite or rare-earth Neodynium (NdFeB) magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; 300mm flying leads EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 50:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 20mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life; cushioned 3-piece coupling; steel output shaft with 2 ballbearings OPTIONS Stainless steel shaft; black finish; dog clutch Power (W) PM90-150GB4 PM90-180GB4 RE90-146GB4 Gearbox GB4 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % * * * % * 34.2* * 42.6* * 33.5* 50 78% * 49.0* * 54.7* * 52.5* 60 76% * 61.4* * 78.3* * 73.7* 75 74% % % % * 15.4* * % * 27.0* * 34.9* * 28.2* 30 84% * 49.0* * 63.3* * 50 78% * 71.1* * 83.1* * 82.7* 60 76% * 106.0* * 112.0* * 113.6* 75 74% ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB4 gearbox is available as an MRO product; for new applications we recommend the GB12 gearbox instead, which offers improved performace with similar dimensions. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

22 *50.2 * *64.9 * *52.6 * % PM / PM / RE (rare earth) with GB4 gearbox *72.9 * *85.2 * *84.8 * % *108.6 * *129.1 * *116.5 * % standard motor configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice 22 Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.0kg 1.4 kg PM kg 1.0kg 1.4 kg RE kg 1.0kg 1.4 kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3004 ISSUE 4 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the For Buyer, customers to alter who any require such in matters excess of and 5000 to units supply per year the Goods we offer so a totally altered, bespoke provided design that service such to alteration fit the application; shall not at materially zero cost affect premium. the This characteristics service enables of the customers Goods. to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.

23 PM / PM / RE (rare earth) with GB9 gearbox 23 standard motor-gearbox configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite or rare-earth Neodynium (NdFeB) magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; 300mm flying leads EXTRAS Ventilated motor with internal fan (IP2x); encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 25mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life - maintenance free; cushioned 1-piece coupling; steel output shaft with 2 ball-bearings OPTIONS Stainless steel shaft; black finish; dog clutch Power (W) PM90-150GB9 PM90-180GB9 RE90-146GB9 Gearbox GB9 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % % * % % * * * % % % % % * % * * * % * * * % * % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB9 gearbox may be coupled with many of our other standard AC or DC motors. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

24 * * * % * * * % drawing for PM / PM / RE (rare earth) with GB9 gearbox * % Graphs are available showing the motor performance throughout the speed range. Contact us for more information. standard motor-gearbox configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice 24 Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3003 ISSUE 3 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the Buyer, For customers alter any who such require matters in excess and of 5000 to supply units per the year Goods we offer so altered, a totally provided bespoke design that such service alteration to fit the application; shall not materially zero cost affect premium. the characteristics This service enables of the customers Goods. to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. DIM A Totally Enclosed Ventilated PM kg 2.3 kg 3.4 kg PM kg 2.3 kg 3.4 kg RE kg 2.3 kg 3.4 kg MOTOR BODY DIAMETER 90mm

25 PM / PM / RE (rare earth) with GB12 gearbox 25 standard motor-gearbox configured and customised for your application MOTOR Permanent magnet DC SPEED rpm PROTECTION IP44 - IP66 POWER up to 900 Watts VOLTAGE V DC INSULATION Class F CONSTRUCTION Ferrite or rare-earth Neodynium (NdFeB) magnets; aluminium end castings; single piece steel body; replaceable carbon brushes; 300mm flying leads EXTRAS Ventilated motor with internal fan (IP2x); Encoder to RoHS standard; 12V or 24V 2Nm failsafe holding brake; dedicated cable harness GEARBOX Worm and wheel RATIOS 12.5:1, 25:1, 30:1, 50:1, 60:1, 75:1 EFFICIENCY up to 95% MATERIALS Delrin or phosphor bronze SHAFT single or double up to 25mm diameter CONSTRUCTION Steel worm shaft; CNC machined aluminium housing; sealed for life - maintenance free; cushioned 1-piece coupling; steel output shaft with 2 ball-bearings OPTIONS Stainless steel shaft; black finish; de-clutch Power (W) PM90-150GB12 PM90-180GB12 RE90-146GB12 Gearbox GB12 Momentary Power Power Ratio Efficiency (W) (W) overload (Nm) Delrin Bronze Delrin Bronze Delrin Bronze Delrin Bronze % % % % * * * % *35.1 * *43.7 * *34.4 * % *50.2 * *56.1 * *53.8 * % *63.0 * *80.3 * *75.6 * % % % % *15.8 * * % *27.7 * *35.7 * *29.0 * % *50.2 * *64.9 * *52.6 * % *72.9 * *85.2 * *84.8 * % *108.6 * *129.1 * *116.5 * % ISO 9001:2000 Certificate No. FM Notes: Designed to operate with PWM controllers. Graphs are available showing the motor performance throughout the speed range. The GB12 gearbox may be coupled with many of our other standard AC or DC motors. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information. *Gearbox life may be less than 5000 hours. Contact us for application advice. Maximum theoretical efficiency.

26 *72.9 * *85.2 * *84.8 * % drawing for PM / PM / RE (rare earth) with GB12 gearbox *108.6 * *129.1 * *116.5 * % standard motor-gearbox configured and customised for your application *Gearbox life may be less than 5000 hours. Contact us for application advice Graphs are available showing the motor performance throughout the speed range. Contact us for more information. 26 Motor Type Motor Weight Gearbox Weight with Delrin Gearbox Weight with bronze DIM A Totally Enclosed Ventilated PM kg 1.1 kg 1.5 kg PM kg 1.1 kg 1.5 kg RE kg 1.1 kg 1.5 kg All dimensions are in mm Many of our drawings are available in 3D format. Please contact us with your requirements SAL3014 ISSUE 1 All information (including without limitation figures) given by the Company relating to the performance of the Goods, is based upon the Company s experience but the Company shall accept no liability should it prove to be in any way inaccurate. It shall be the responsibility of the Buyer to ensure that the capacity and the performance of the goods are sufficient and suitable for the intended purpose (whether by the Buyer or by any third party) and that the goods are not adversely affected by any items used in their installation. The Company reserves the right, without notification to the Buyer, to alter any such matters and to supply the Goods so altered, provided that such alteration shall not materially affect the characteristics of the Goods. For customers who require in excess of 5000 units per year we offer a totally bespoke design service to fit the application; at zero cost premium. This service enables customers to outline any number of mechanical, electrical, environmental or even aesthetic requirements in order to realise their preferred motor-gearbox solution. To find out more please contact a member of our sales team on +44 (0) or visit our website at for further information.