How To Write A Recipe Card
|
|
- Roger Terry
- 3 years ago
- Views:
Transcription
1 Forging stock standards guideline Issue n 10 FORGING STOCK 30 Microstructure 34 Grain size Air melted (except if δ ferrite or problem 1 per batch) 50 Cleanness/ Inclusion See EN Macrostructure 53 Thermal analysis (b transus temperature) See text of EN Internal (Ni + Co) Remelted Level 3 Level 2 (except if δ ferrite or problem 1 per batch) (unless required by the order) See EN 2950 (unless required by the order or for certain alloys) On forged sample (EN 2957) or sample use for cleanliness Top of the top billet of ingot + Heat treatment (unless required by the order) (unless required by the order, or for certain alloys) Level 3 See EN See EN See EN See EN See EN 2950 See See EN Top of the top billet Capability clause applies See EN See EN 2950 Grade 2 Level 2 See EN See EN Grade 2 Top and bottom of billet See EN Top and bottom capability clause applies Class 5 : D 250 mm Class 4 : D > 250 mm For D > 350 mm To be agreed between manufacturer and purchaser See EN Use EN 3684 See EN Top and bottom Use EN 3684 Class 5 : D 230 mm and all fine grain Class 3 : 230 mm < D 356 mm Class 2 : D > 356 mm See EN Grade 2
2 Forging standards guideline FORGINGS 30 Microstructure 34 Grain size 38 Intergranular corrosion Air melted Remelted (except δ ferrite or problem for first article only) (except δ ferrite or problem for first article only) Level 3 See EN See EN See EN See EN See EN For first article only See EN See EN Cleanness/ Inclusion See EN See EN Macrostructure 61 Internal Grain flow on first article See EN See EN Grain flow on first article See EN For first article only 74 Surface contamination (Ni + Co) Level 2 See EN Production cut up and test ring 1 per batch See EN ( + and test ring 1 per batch) See EN See EN First article + production cut up + test ring (1 per batch) te : Level 3 See EN See EN % See EN 2954 For first article limited to precision forged parts Hydrogen sample peeled from finished surfaces (Frequency given in colum 30) Level 2 See EN First article + production cut up and test ring 1 per batch See EN % See EN 2954 For first article + limited to precision forged parts
3 BAR Air melted Remelted 30 Microstructure (except δ ferrite or problem 1 per batch) (except δ ferrite or problem 1 per batch) 34 Grain size 38 Intergranular corrosion Bar standards guideline Level 3 See EN See EN See EN Cleanness/ Inclusion 51 Macrostructure Issue n Decarburisation 61 Internal See EN Class 4 (Ni + Co) Level 2 See EN See EN See EN See EN See EN Class 4 Level 3 See EN See EN See EN Level 2 See EN See EN See EN See EN
4 Remelted stock standards guideline REMELTED STOCK Mechanical testing Air melted See EN Capability Remelted See EN Capability Level 3 See EN Capability (Ni + Co) Level 2 See EN Capability Level 3 See EN Capability Level 2 See EN Capability
5 CASTING Air melted 30 Microstructure See EN only unless δ ferrite or problem, then 1 per batch Remelted See EN only unless δ ferrite or problem, then 1 per batch Level 3 See EN only (Ni + Co) Level 2 See EN only 34 Grain size 35 Repair Welding Casting standards guideline 61 Internal 74 Surface contamination only See EN See EN See EN only. If necessary See EN See EN See EN only See EN See EN See EN only. If necessary See EN See EN See EN Level 3 only See EN See EN See EN See EN only Level 2 only See EN See EN See EN See EN XX Hydrogen Sample cut from the casting in the delivery condition + production cut up
6 SHEETS AND STRIP Air melted 30 Microstructure except if δ Ferrite or problem 1 per cast Remelted except if δ Ferrite or problem 1 per cast 34 Grain size 38 Intergranular Sheet and strip standard guideline corrosion See EN series steels only) See EN series steels only) See EN Cleanness 59 Decarburisation 61 Internal Category according See EN Category according See EN Capability clause See EN (1 per batch) Cold rolled : thing Hot rolled : Level 3 See EN See EN See EN (Ni + Co) Level 2 See EN See EN See EN Cold rolled : Class 3 thing Hot rolled : 74 Surface contamination Level 3 See EN See EN See EN Level 2 See EN See EN See EN See EN Class 3
Products. EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview
Products EschmannStahlGrades Plastic Mould Steel Hot Work Tool Steel Cold Work Tool Steel Overview High quality, Comprehensive and applicationoriented We Have the Right Solution High Quality and Quickly
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet 2205 UNS S2205 EN 1.4462 2304 UNS S2304 EN 1.4362 INTRODUCTION Types 2205 and 2304 are duplex stainless steel grades with a microstructure,
More informationGENERAL PROPERTIES //////////////////////////////////////////////////////
ALLOY 625 DATA SHEET //// Alloy 625 (UNS designation N06625) is a nickel-chromium-molybdenum alloy possessing excellent resistance to oxidation and corrosion over a broad range of corrosive conditions,
More informationASTM A860/A860M-09 Standard Specification for Wrought High Strength. Ferritic Steel Butt Welding Fittings. 1. Scope :- 2. Reference Documents :-
Standard Specification for Wrought High Strength Ferritic Steel Butt Welding Fittings 1. Scope :- 1.1 This specification covers wrought high strength ferritic steel butt-welding fitting of seamless and
More informationAUSTENITIC STAINLESS DAMASCENE STEEL
AUSTENITIC STAINLESS DAMASCENE STEEL Damasteel s austenitic stainless Damascene Steel is a mix between types 304L and 316L stainless steels which are variations of the 18 percent chromium 8 percent nickel
More informationContents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact...
2015-04-09 Page 1 Contents Nickel Alloys... 2 Copper Alloys... 19 Titanium Alloys... 26 Stainless Steel... 33 Miscellaneous... 35 Welding Material... 37 Contact... 41 2015-04-09 Page 2 Nickel Alloys Alloy
More informationLecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth
Lecture slides on rolling By: Dr H N Dhakal Lecturer in Mechanical and Marine Engineering, School of Engineering, University of Plymouth Bulk deformation forming (rolling) Rolling is the process of reducing
More informationIntegrated Computational Materials Engineering (ICME) for Steel Industry
Integrated Computational Materials Engineering (ICME) for Steel Industry Dr G Balachandran Head ( R&D) Kalyani Carpenter Special Steels Ltd., Pune 411 036. Indo-US Workshop on ICME for Integrated Realization
More informationALLOY 2205 DATA SHEET
ALLOY 2205 DATA SHEET UNS S32205, EN 1.4462 / UNS S31803 GENERAL PROPERTIES ////////////////////////////////////////////////////// //// 2205 (UNS designations S32205 / S31803) is a 22 % chromium, 3 % molybdenum,
More informationEnhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014. Juha Kela / 316plus
Enhanced version of 316/316L austenitic stainless steel. Better material performance at a lower cost. Juha Kela 16.6.2014 8 July 2014 1 Lower cost 8 July 2014 2 Lower cost 316 plus is available at lower,
More informationGuiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006)
PE- 03-28 - rev 5 21 November 2006 Page 1 of 5 Guiding Principles for the contents of Particular Materials Appraisals (Version approved at the WGP on 21 November 2006) Introduction A Particular Material
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 310S (S31008)/ EN 1.4845 Introduction: SS310 is a highly alloyed austenitic stainless steel designed for elevated-temperature service.
More informationFEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS. Kris Vaithinathan and Richard Lanam Engelhard Corporation
FEATURES AND BENEFITS OF DIFFERENT PLATINUM ALLOYS Kris Vaithinathan and Richard Lanam Engelhard Corporation Introduction There has been a significant increase in the world wide use of platinum for jewelry
More informationHigh-strength and ultrahigh-strength. Cut sheet from hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.
High-strength and ultrahigh-strength TM steels Cut sheet from hot-rolled steel strip and heavy plate Josef Elmer, Key account manager voestalpine Steel Division www.voestalpine.com/steel Weight savings
More informationHEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES. Page 1 Version no.: V0-090902
Page 1 HEAVY-DUTY HAND CUTTING TORCHES AND ACCESSORIES Page 2 Heavy-Duty Hand Cutting Torch HCT 663: With lever-operated valve for cutting oxygen, for cutting duties involving high thermal loads on slabs,
More informationStandard Specification for Tool Steel High Speed 1
Designation: A 600 92a (Reapproved 2004) Standard Specification for Tool Steel High Speed This standard is issued under the fixed designation A 600; the number immediately following the designation indicates
More informationTABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
More informationDer Einfluss thermophysikalischer Daten auf die numerische Simulation von Gießprozessen
Der Einfluss thermophysikalischer Daten auf die numerische Simulation von Gießprozessen Tagung des Arbeitskreises Thermophysik, 4. 5.3.2010 Karlsruhe, Deutschland E. Kaschnitz Österreichisches Gießerei-Institut
More informationWorkers. There are many different jobs in a steel mill. As with most industries, the main jobs fall into a list of categories, such as:
Workers There are many different jobs in a steel mill. As with most industries, the main jobs fall into a list of categories, such as: Laborer Foreman Supervisor * Choose one of the job titles. Identify
More informationNAS: A REFERENCE IN THE STAINLESS STEEL INDUSTRY
NAS: A REFERENCE IN THE STAINLESS STEEL INDUSTRY Cristobal Fuentes CEO of NAS Investor and Analyst s Day London, 8 th November 2011 Table of Contents I. Company Overview II. Raw Materials III. Integrated
More informationNORSOK STANDARD M-650 Edition 4. Qualification of manufacturers of special materials
Date: 2014-05-30 NORSOK STANDARD M-650 Edition 4 Qualification of manufacturers of special materials A: Frequently Asked Questions FAQ B: Clarification and Comment List NORSOK standard M650 Ed. 4 INTRODUCTION
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationEngineering Your Competitive Edge. Applications of Kennametal mill rolls
Engineering Your Competitive Edge of Kennametal mill rolls Tungsten carbide is a proven material for many stands in the rolling mill industry. Tungsten carbide grades developed by KENNAMETAL EPG achieve
More informationLONG LIFE BEARING SERIES
LONG LIFE BEARING SERIES . Extension of Bearing Life. Mechanism of Flaking FLAKING IN CONTAMINATED LUBRICANT Mechanism Type SURFACE STARTING FLAKING SURFACE FLAKING Abrasion caused by small hard particles
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Sheet T409 INTRODUCTION NAS 409 is an 11% chromium, stabilized ferritic stainless steel. It is not as resistant to corrosion or high-temperature oxidation
More informationDX2202 Duplex stainless steel
Stainless Europe Grade DX22 Duplex stainless steel Chemical Composition Elements C Mn Cr Ni Mo N %.25.3 23. 2.5
More informationRules for Classification and Construction Materials and Welding
II Rules for Classification and Construction Materials and Welding 1 Metallic Materials 2 Steel and Iron Materials Edition 2009 The following Rules come into force on April 1 st, 2009 Alterations to the
More informationAluminium Rolling Mill Technology
DIE BIBLIOTHEK DER TECHNIK 233 Aluminium Rolling Mill Technology Future concepts in thin-strip and foil rolling VERLAG MODERNE INDUSTRIE Achenbach Buschhütten Contents Aluminium an innovative material
More informationHigh Performance Austenitic Stainless Steel
High Performance Austenitic Stainless Steel Steel grades Outokumpu EN ASTM UNS ISO 4438 1.4438 317L S31703 4438-317 03-I 4439 1.4439 317LMN S31726 4439-317-26-E 1.4539 N08904 4539 089 04-I 1.4547 S31254
More informationValve Steel. Valve Steel
Valve Steel Valve Steel BÖHLER-UDDEHOLM Precision Strip AB is one of the world s leading manufacturers of high quality strip steel. More than a century s experience of cold rolling has given us a unique
More informationNorth American Stainless
North American Stainless Flat Products Stainless Steel Grade Sheet 430 (S43000)/ EN 1.4016 Introduction: SS430 is a low-carbon plain chromium, ferritic stainless steel without any stabilization of carbon
More informationPierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013
Pierre Marchand, product director, speciality product Meeting NEI-NRC March 14th 2013 Agenda Dubuc works: location and overview MMC fabrication process at Rio Tinto Alcan Boralcan product caracteristics
More informationList of approvals of SWG GmbH and GVG mbh
Qualitätsprüfung Produkte Technical Document QP-TQ-TD-01EN Titel: Title: List of approvals of SWG GmbH and GVG mbh Ersetzt: Dokument-Nr.: QP-TQ-TD-01EN Rev.: C vom: 26.01.2015 Replaces: Document-No.: (engl.version)
More informationPART 6 SPECIAL CONTRACT RULES FOR METALS CONTENTS
PART 6 SPECIAL CONTRACT RULES FOR METALS * CONTENTS Contracts Page High Grade Primary Aluminium 6-1 Aluminium Alloy 6-5 Copper - Grade A 6-11 Standard Lead 6-13 Primary Nickel 6-15 North American Special
More informationWeld Cracking. An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction. The James F. Lincoln Arc Welding Foundation
Weld Cracking An Excerpt from The Fabricators' and Erectors' Guide to Welded Steel Construction The James F. Lincoln Arc Welding Foundation Weld Cracking Several types of discontinuities may occur in welds
More informationHeat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment
Heat Exchanger Thin Film Foul Release Applications Corrosion Resistant Protective Coatings Grit Blast Surface Prep of Tubular Equipment Non-Destructive Examination Heat Exchanger Mechanical Repair Services
More informationROLLED STAINLESS STEEL PLATES, SECTIONS AND BARS
STANDARD FOR CERTIFICATION No. 2.9 ROLLED STAINLESS STEEL PLATES, SECTIONS AND BARS OCTOBER 2008 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous
More informationX15TN TM. A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS INNOVATION RESEARCH SERVICE.
TM A high hardness, corrosion and fatigue resistance martensitic grade CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT
More informationROLLS LIFELINE OF ROLLING MILLS. Gireesh Madan Manager (Monitoring & Evaluation) Project Management Cell New Delhi
ROLLS LIFELINE OF ROLLING MILLS Gireesh Madan Manager (Monitoring & Evaluation) Project Management Cell New Delhi a h W s i t o m m o c e r u t c i p e h t l l a n i n? s m o r f d e c u d o r p e s r
More informationNIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE
Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_01_201211f
More informationATI 2205 ATI 2205. Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationG1RT-CT-2001-05071 A. BASIC CONCEPTS F. GUTIÉRREZ-SOLANA S. CICERO J.A. ALVAREZ R. LACALLE W P 6: TRAINING & EDUCATION
A. BASIC CONCEPTS 472 PROCESSES LOADING RATE Static or Quasi-Sstatic Dynamic MATERIAL ENVIRONMENT Liquid or Gaseous Environments AGGRESSIVE ENVIRONMENT MECHANIC LOADS Stress corrosion cracking (SCC) Corrosion
More informationStandard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1
Designation: A 213/A 213M 03b Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 This standard is issued
More informationSection 4: NiResist Iron
Section 4: NiResist Iron Section 4 Ni-Resist Description of Grades...4-2 201 (Type 1) Ni-Resist...4-3 202 (Type 2) Ni-Resist...4-6 Stock Listings...4-8 4-1 Ni-Resist Description of Grades Ni-Resist Dura-Bar
More informationDuplex Stainless Steel Fabrication. Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association
Duplex Stainless Steel Fabrication Gary M. Carinci TMR Stainless Consultant for International Molybdenum Association 1 Promoting molybdenum - as a material with superior properties and performance in a
More informationPolitecnico di Torino. Porto Institutional Repository
Politecnico di Torino Porto Institutional Repository [Other] Advanced high-strength steels for car-body manufacturing Original Citation: D. Firrao, G. Scavino, P. Matteis, M. De Sanctis, R. Valentini,
More informationRPV - RP - RA air handling units
APPLICATIONS Heating, ventilation, cooling >> FACTORIES >> WAREHOUSES >> HALLS >> DISTRIBUTION CENTRES >> COMMERCIAL PREMISES >> PLACES OF WORSHIP RPV - RP - RA air handling units www.reznor.eu RPV - RP
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 304 UNS S30400 EN 1.4301 AISI 304L UNS S30430 EN 1.4307 INTRODUCTION: Types 304 and 304L are the most versatile and widely used of
More informationStandard Specification for Tool Steels Alloy 1
Designation: A 68 8 Standard Specification for Tool Steels Alloy This standard is issued under the fixed designation A 68; the number immediately following the designation indicates the year of original
More informationTHE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL
THE INFLUENCE OF STEEL GRADE AND STEEL HARDNESS ON TOOL LIFE WHEN MILLING IN HARDENED TOOL STEEL S. Gunnarsson, B. Högman and L. G. Nordh Uddeholm Tooling AB Research and Development 683 85 Hagfors Sweden
More informationStainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
More informationTHE WHOLE WORLD OF GAS SAFETY ENGINEERING. MINISPRAYJET Flame spraying gun
MINISPRAYJET MINISPRAYJET Flame spraying gun MINISPRAYJET A compact and light weight flame spraying gun Flame spraying gun thermal spraying with powder using oxy-fuel gas flame. Function and safety are
More informationHot billet charging saves millions of energy costs and helps to increase rolling mill productivity considerably.
Hot billet charging saves millions of energy costs and helps to increase rolling mill productivity considerably. Authors: Volker Preiß - Billet Yard Operation Manager BSW Sebastian Ritter Project Engineer
More informationALLOY 6022 SHEET. Higher Strength with Improved Formability SUPPLYING THE WORLD S BEST
SUPPLYING THE WORLD S BEST DESCRIPTION 6022 is a heat treatable low copper, Al-Si-Mg sheet alloy developed by Alcoa to satisfy the needs of automotive manufacturers for closure panels, such as a hood,
More informationDIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES
DIN 17172-78 STEEL PIPES FOR PIPE LINES FOR THE TRANSPORT OF COMBUSTIBLE FLUIDS AND GASES For connection with the International Draft Standards 3183 and 3845 published by the International Organization
More informationALLOY C276 DATA SHEET
ALLOY C276 DATA SHEET //// Alloy C276 (UNS designation N10276) is a nickel-molybdenum-chromium-iron-tungsten alloy known for its corrosion resistance in a wide range of aggressive media. It is one of the
More informationPhase Transformations in Metals and Alloys
Phase Transformations in Metals and Alloys THIRD EDITION DAVID A. PORTER, KENNETH E. EASTERLING, and MOHAMED Y. SHERIF ( г йс) CRC Press ^ ^ ) Taylor & Francis Group Boca Raton London New York CRC Press
More informationPolyimide labels for Printed Circuit Boards
Polyimide labels for Printed Circuit Boards The right match for any PCB labelling application Labels on Printed Circuit Boards Matching product performance with application needs Printed Circuit Boards
More informationAll kinds of fittings and piping for the energy markets, including large-size and heavy walled machined pipes. A strategic choice
All kinds of fittings and piping for the energy markets, including large-size and heavy walled machined pipes Tectubi Raccordi is a well-known and well-established leading Italian manufacturer of buttwelding
More informationWJM Technologies excellence in material joining
Girish P. Kelkar, Ph.D. (562) 743-7576 girish@welding-consultant.com www.welding-consultant.com Weld Cracks An Engineer s Worst Nightmare There are a variety of physical defects such as undercut, insufficient
More informationWear-resistant steel grades. Hot-rolled steel strip and heavy plate. voestalpine Steel Division www.voestalpine.com/steel
Wear-resistant steel grades Hot-rolled steel strip and heavy plate Josef Elmer, Key Account Manager voestalpine Steel Division www.voestalpine.com/steel For the highest stress Highest resistance to wear
More informationThe objectives of this program are shown.
1 2 Selecting the proper Tool Steels, Heat Treatment, & Surface Treatments for a stamping application can be a complex and confusing process. To simplify this process, a few basic facts should be understood.
More informationObjectives/Introduction Extraction of zinc Physical properties of zinc Zinc casting alloys Wrought zinc alloys Engineering design with zinc alloys
Lecture 7 Zinc and its alloys Subjects of interest Objectives/Introduction Extraction of zinc Physical properties of zinc Zinc casting alloys Wrought zinc alloys Engineering design with zinc alloys Objectives
More informationPHOTO-ETCHING OF TOOL STEEL
Contents The photo-etching process... 3 Advantages of textured surfaces... 3 Test programme... 4 Summary... 7 This information is based on our present state of knowledge and is intended to provide general
More informationG8 GALILEO. Innovation with Integrity. High-End Melt-extraction Analyzer. Inert Gas Method
G8 GALILEO High-End Melt-extraction Analyzer Innovation with Integrity Inert Gas Method Determination of O, N and H The market demands Metals, minerals, and inorganic compound markets demand high-quality
More informationTITANIUM FABRICATION CORP.
TITANIUM FABRICATION CORP. Titanium, Zirconium, and Tantalum Clad Construction General Considerations In many applications, particularly for large pressure vessels designed for high temperature and pressure,
More informationODS Alloys in Coal-Fired Heat Exchangers Prototypes and Testing
ODS Alloys in Coal-Fired Heat Exchangers Prototypes and Testing 2010 ODS Alloy Workshop San Diego, California November 17 18, 2010 John P. Hurley Senior Research Advisor Energy & Environmental Research
More informationVDM Alloy 200 Nickel 99.2. VDM Alloy 201 LC-Nickel 99.2. Material Data Sheet No. 1001 October 2002 Edition
VDM Alloy 200 Nickel 99.2 VDM Alloy 201 LC-Nickel 99.2 Material Data Sheet No. 1001 October 2002 Edition 2 Nickel 99.2 alloy 200 LC-Nickel 99.2 alloy 201 Nickel 99.2 is an unalloyed wrought nickel. It
More informationEN 13445-4:2002 (E) Issue 1 (2002-05)
Issue 1 (2002-05) 8.4.4 Impact test...26 8.4.5 Bend test...26 8.4.6 Macro examination...27 8.4.7 Micro examination...27 8.4.8 Hardness test...27 8.4.9 Retests...27 8.4.10 Test report...28 9 Forming of
More informationMaterial data sheet. EOS CobaltChrome MP1. Description
EOS CobaltChrome MP1 EOS CobaltChrome MP1 is a cobalt-chrome-molybdenum-based superalloy powder which has been optimized especially for processing on EOSINT M systems. This document provides information
More informationSECTION 4: Cable Ladder Stainless Steel & Aluminium
SECTION 4: Cable Ladder & Aluminium Type 3/50 (NEMA 6A) Type 4/70L Type 5/112 (NEMA 20C) > 4:3 > 4:4 > 4:5 Aluminium Type 4/70A (NEMA 16B) Ladder Splice Plates > 4:7 > 3:18 Page 4:1 Cable Ladder General
More informationExcellence in Specialty Steel
Welcome to BGH We are EXCELLENCE in Specialty Steel! Six production sites in Germany and Poland. Worldwide service through regional sales offices and distribution partners. Sustainability through continuous
More informationa. Are the foundry s employees trained and familiar with portions of the system applicable to their position?
1. Does the foundry have a documented quality system? a. Are the foundry s employees trained and familiar with portions of the system applicable to their position? b. What recognized quality management
More informationLASER CUTTING OF STAINLESS STEEL
LASER CUTTING OF STAINLESS STEEL Laser inert gas cutting is the most applicable process type used for cutting of stainless steel. Laser oxygen cutting is also applied in cases where the cut face oxidation
More informationNorth American Stainless
North American Stainless Long Products Stainless Steel Grade Sheet AISI 316 UNS S31600 EN 1.4401 AISI 316L UNS S31630 EN 1.4404 INTRODUCTION NAS provides 316 and 316L SS, which are molybdenum-bearing austenitic
More informationHigh tensile strength stainless fasteners
High tensile strength stainless fasteners BUFAB STAINLESS HISTORY 1674 Svartå Bruk was founded 1912 Svartå Bruk was incorporated into the Hasselfors group. 1947 Production of Stainless Steel Fasteners
More informationFRIULFORGIA Srl COMPANY PRESENTATION. We shape your world
FRIULFORGIA Srl We shape your world COMPANY PRESENTATION E-mail: info@friulforgia.it - Web: www.friulforgia.it 1 FRIULFORGIA Foundation and facts Friulforgiaisa privatelyheldcompany, whichstarteditsactivitiesin
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TN-212-25_001
NO. HU-DOP_TN-212-25_001 Product type 212 (TN) 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-35_001 Product type 212 (TN) 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TN-212-45_001 Product type 212 (TN)
More informationHOW CAST GOLD BARS ARE MANUFACTURED
TECHNICAL REPORT Supplement 2014 HOW CAST GOLD BARS ARE MANUFACTURED BACKGROUND INFORMATION Cast gold bars are normally produced directly from gold that has been melted. However, the way in which melted
More informationNorth American Stainless Long Products
North American Stainless Long Products 1 North American Stainless North American Stainless is part of the most competitive stainless steel manufacturing group in the world, Acerinox, S.A. The development
More informationDuplex stainless steels
Duple stainless steels 2202 2507 2304 2205 by ArcelorMittal ArcelorMittal, your key partner ArcelorMittal is the world leader in the steel industry. Through many of its units, it offers a multitude of
More informationTechnical Data BLUE SHEET. Martensitic. stainless steels. Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES APPLICATIONS PRODUCT FORM
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Martensitic Stainless Steels Types 410, 420, 425 Mod, and 440A GENERAL PROPERTIES Allegheny Ludlum Types 410, 420, 425 Modified, and
More informationThe next generation of permanent cathode and lead anode technology
MARSDEN, T. and JICKLING, J The next generation of permanent cathode and lead anode technology. Hydrometallurgy Conference 2009, The Southern African Institute of Mining and Metallurgy, 2009. The next
More informationCopper Alloys for Injection, Thermoform and Blow Molds
Copper Alloys for Injection, Thermoform and Blow Molds by Robert Kusner Manager of Technical Services June 2015 Today s Agenda History of copper mold alloys Why use copper? Which copper alloy should I
More informationHow To Make A Lightweight Hot Stamping
Innovative Materials and Technologies for Vehicle Construction Oliver Hoffmann, Hannover, 24.4.2012 ThyssenKrupp Group Structure 7 business areas including Steel Europe ThyssenKrupp Steel Europe Elevator
More informationBonded Abrasives. Precise cutting and grinding discs for many materials
Bonded Abrasives Precise cutting and grinding discs for many materials 1 sia Abrasives Your key to a perfect surface Many materials hide a secret. They keep their real beauty hidden. Only a professional
More informationCooking at the Speed of light!
Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide
More informationDECLARATION OF PERFORMANCE NO. HU-DOP_TD-25_001
NO. HU-DOP_TD-25_001 Product type TD 3,5x25 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-35_001 Product type TD 3,5x35 mm EN 14566:2008+A1:2009 NO. HU-DOP_TD-45_001 Product type TD 3,5x45 mm EN 14566:2008+A1:2009
More informationPRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January
News Release FOR IMMEDIATE RELEASE February 25, 2015 CONTACT: Lisa Harrison 202.452.7115/ lharrison@steel.org PRELIMINARY STEEL IMPORTS INCREASE 17% IN JANUARY Import Market Share 32% in January Washington,
More informationME 612 Metal Forming and Theory of Plasticity. 1. Introduction
Metal Forming and Theory of Plasticity Yrd.Doç. e mail: azsenalp@gyte.edu.tr Makine Mühendisliği Bölümü Gebze Yüksek Teknoloji Enstitüsü In general, it is possible to evaluate metal forming operations
More informationNaue GmbH&Co.KG. Quality Control and. Quality Assurance. Manual. For Geomembranes
Naue GmbH&Co.KG Quality Control and Quality Assurance Manual For Geomembranes July 2004 V.O TABLE OF CONTENTS 1. Introduction 2. Quality Assurance and Control 2.1 General 2.2 Quality management acc. to
More informationCOMPAX SUPREME Mold Quality Tool Steel
T OOL STEEL FACTS COMPAX Mold Quality Tool Steel Great Tooling Starts Here! 2 This information is based on our present state of knowledge and is intended to provide general notes on our products and their
More informationFor New Technology Network. Steel Manufacturing Machinery Product Guide Book
For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment
More information