Wilo IPL 1.5 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM IPL 1.5-1/5-6Hz 1,75 ( Pole) 6 1 H[ft] H[m] Wilo-IPL 1.5-1/5-175 RPM - 6 Hz - North America Qmin Ø. IPL 1.5-1/5- % 5% % 5% 6.% 5% 7 6 5 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: 1~115 / - V, 6 Hz TEFC, (ODP Opt), EPACT Rated 1¼ with ¼ pressure gauge tappings 15 PSI (1 Bar) % 1 5% % 1. hp 1 Materials of Construction Pump volute Impeller Shaft Mechanical seal Cast Iron Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers).5 1 1.5.5 Q[l/s] 6 1 NPSH [ft] Ø. 6 NPSH [m]. 1.5 1. Applications Hot water heating Industrial circulation.5 Air conditioning Solar Systems 1 Closed cooling circuits Geothermal Systems 6 1 P [hp]. P [kw] Ø....15.1.1.5 1 Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x f e lo m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x 1 ¼ ¾ 17 11 / ¾ 1 / 5¼ 9 1 / 9 / 1 9 / 1 15 / 7 11 5½ 1 / 5 7 / 5 lbs IPL 1.5-1/5- () (7) (9) (96) (1) (1) (9) (9) () (5) (17) (79) (1) () (5).6 kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 k Ø D Ø TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.5-1/5-. 1 6 /. - 115 / - WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL 1.5 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) 5 1 15 H[ft] Wilo-IPL 1.5-6/95- H[m] 5 Wilo-IPL 1.5-/- 175 RPM - 6 Hz - North America 1 Qmin Ø 6.1 5 Ø 5.6 5 Ø.9 Ø. 15 1 5 IPL 1.5-6/95- IPL 1.5-9/95- IPL 1.5-/95- IPL 1.5-/- 5% 5% 57.1% 6 1 6% 6.5% 66.% 66%. hp 1 hp 6%.75 hp 5% 5%.5 hp 1 1 6 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal 1~115 / - V, 6 Hz TEFC, (ODP Opt), EPACT Rated 1½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) 1 5 6 7 Q[l/s] 5 1 15 5 NPSH [ft] NPSH [m] 1 Ø 6.1 1 6 1 Applications Hot water heating Air conditioning Closed cooling circuits Industrial circulation Solar Systems Geothermal Systems 5 1 15 P [hp] 1. Ø 6.1. Ø 5.6.6 Ø.9. Ø.. 6 1 5 P [kw].6.. Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m o p x IPL 1.5-/- IPL 1.5-/95- IPL 1.5-9/95- IPL 1.5-6/95-1½ 15 / 17 7 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 7 1 6½ / 1 / 5 7 / 56.7 lbs () (75) () (19) (11) (1) () (9) () (5) (17) () (5) / () (9) 6 kg 1½ 15 / 17 7 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 7 1 6½ / 1 / 5 7 / 5.6 lbs () (75) () (19) (11) (1) () (9) () (5) (17) () (5) / () (9) 7 kg 1½ 15 / 1 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 6 / 1 6½ / 1 / 5 7 / 6.6 lbs () (75) (1) (19) (11) (1) () (9) () (5) (15) () (5) / () (9) 1 kg 1½ 15 / 17 7 / 5 / ¾ 5¼ 9 9 / 9 / 1 9 / 1 15 / 7 1 6½ / 1 / 5 7 / 76.7 lbs () (75) () (19) (11) (1) () (9) () (5) (17) () (5) / () (9) 5 kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 Ø k Ø D TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.5-/-. 1 6 /. - 115 / - IPL 1.5-/95-.5 1. /. -. 115 / - IPL 1.5-9/95-.75 1 1. / 5. - 5.1 115 / - IPL 1.5-6/95-1 1 1. / 7. - 6.7 115 / - WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) 1 H[ft] H[m] Wilo-IPL -/1- Wilo-IPL -1/15-1 5 175 RPM - 6 Hz - North America Qmin 1 Ø 6.1 5% 6% 5 7% 1 71.7% Ø 5.5 7% 5 Ø 5. IPL -/1-71.7% Ø.5 15 1 5 IPL -/1- IPL -/- IPL -1/15-66.% 67.%.75 hp.5 hp 1 hp 6% 1.5 hp 6 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite 1 6 1 1 NPSH [ft] Ø 6.1 1 1 1 P [hp] 1.6 1. Ø 5.5. Ø 5.. Ø.5 1 Q[l/s] NPSH [m] 5 1 P [kw] 1. Ø 6.1.. Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL -1/15- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 / 66. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51).1 kg IPL -/1- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 / 76. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51).6 kg IPL -/- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 /. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51). kg IPL -/1- ½ 17 9 / ½ 5 1 / 5¼ 9¾ 1 / 1 9 / 1 15 / 7 1 6¾ 1 / 5 7 / 91. lbs (5) (9) (6) (11) (1) (1) () (1) () (5) (17) (56) (17) () (51) 1. kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L TEFC Motor Data 5¼ 7 / ½ x 9 / (1) (7) (1) ( x 1) P Phase FLA Voltage n x dl Model [HP] [~] [A] [V] IPL -1/15-.5 1. /. -. 115 / - IPL -/1-.75 1 1. / 5. - 5.1 115 / - 1 1 1. / 7. - 6.7 115 / - IPL -/- 1. / 1.7 - / 6 1 1. 575 ø d1 ø k ø D 1.5 1 1 / 9.5-9 115 / - WILO USA LLC IPL -/1-1.5 5 -. /. - / 6 1.5 1.9 575 WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL.5 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) 1 5 6 H[ft] Wilo-IPL.5-/75- H[m] Wilo-IPL.5-15/15-1 Qmin 175 RPM - 6 Hz - North America 1 Ø 5. Ø. 5% 5% 6% Ø. 6%.75 hp 5 1 15 5 5% 5% 1.5 hp 1 hp 1 1 5 6 NPSH [ft] 1 P [hp] 5 1 15 5 1.6 1... Ø 5. Ø.5 IPL.5-/75- IPL.5-/- IPL.5-17/15- IPL.5-15/15-67.% 66.5% 6.7% 66.5% 1 5 6.5 hp Ø.5 Ø 5. Ø 5. Ø 5. Q[l/s] 9 7 6 5 1 NPSH [m] 1 P [kw] 1... Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated ½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems 5 1 15 5 Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL.5-15/15- ½ ¾ 17 1 / 11 / 5 7 / 5¼ 1 1 / 5 5 / 1 9 / / 7 1½ 6¾ 1 / 5 7 / 7.7 lbs (65) (95) (5) (119) (1) (1) (57) (15) () (55) (17) () (171) () (57) 5.7 kg IPL.5-17/15- ½ ¾ 7 / 11 / 5 7 / 5¼ 1 1 / 5 5 / 1 9 / / 6 / 1½ 6¾ 1 / 5 7 /. lbs (65) (95) (1) (119) (1) (1) (57) (15) () (55) (15) () (171) () (57). kg IPL.5-/- ½ ¾ 17 1 / 11 / 5 7 / 5¾ 1 1 / 5 5 / 1 9 / / 7 1½ 6¾ 1 / 5 7 / 96. lbs (65) (95) (5) (119) (1) () (57) (15) () (55) (17) () (171) () (57).9 kg ½ ¾ 17 1 / 11 / 5 7 / 5¾ 1 1 / 5 5 / 1 9 / / 7 1½ 6¾ 1 / 5 7 / 9.7 lbs IPL.5-/75- (65) (95) (5) (119) (1) () (57) (15) () (55) (17) () (171) () (57).7 kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L.5 TEFC Motor Data 7 5 / 5½ X ¾ (17) (11) (1) ( x 19) P Phase FLA Voltage n x dl Model [HP] [~] [A] [V] IPL.5-15/15-.5 1. /. -. 115 / - IPL.5-17/15-.75 1 1. / 5. - 5.1 115 / - 1 1 1. / 7. - 6.7 115 / - IPL.5-/- 1. / 1.7 - / 6 1 1. 575 1.5 1 1 / 9.5-9 115 / - IPL.5-/75-1.5 5 -. /. - / 6 1.5 1.9 575 ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL 175 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz 1,75 ( Pole) 6 H[ft] Wilo-IPL -6/6- H[m] Wilo-IPL -/- 9 Qmin 175 RPM - 6 Hz - North America 1 Ø 5. Ø.9 IPL -6/6- IPL -/- 5% 5% 6% 5% 5% 6% 7% 67.6% 7.6% 7% 6% 6% 1.5 hp 5% 5% 5% 1 hp 7 6 5 1 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) 5 1 15 5 5 1 Q[l/s] 6 NPSH [ft] NPSH [m] Ø 5. 6 15 1 5 Impeller Shaft Mechanical seal Applications Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) 5 1 15 5 5 6 P [hp] P [kw] 1.6 1. Ø 5. 1... Ø.9.. Hot water heating Air conditioning Closed cooling circuits Industrial circulation Solar Systems Geothermal Systems 5 1 15 5 5 Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL -/- 1 / 1 1 / 15 / 6 5¾ 1 7 / 5 5 / 1 9 / / 7 15 7 1 / 5 7 / 1.6 lbs () (15) (5) (15) (15) () (77) (15) () (55) (17) (1) (17) () (6) 7 kg IPL -6/6-1 / 1 1 / 15 / 6 5¾ 1 11 / 5 5 / 1 9 / / 7 15 7 1 / 5 7 / 11.7 lbs () (15) (5) (15) (15) () (71) (15) () (55) (17) (1) (17) () (6) 5. kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 7½ 5 1 / 6 X ¾ (191) (1) (15.) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] 1 1 1. / 7. - 6.7 115 / - IPL -/- 1. / 1.7 - / 6 1 1. 575 1.5 1 1 / 9.5-9 115 / - IPL -6/6-1.5 5 -. /. - / 6 1.5 1.9 575 ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL 1.5 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz,5 ( Pole) H[ft] 7 6 5 1 5 1 15 5 Ø.7 57% 55.6% 61% 61.7% 61.% 6 1 1 5 6 7 Q[l/s] 5 1 15 5 NPSH [ft] NPSH [m] 15 1 5 6 1 Ø. 57% Ø.7 Ø. 1 6 5 1 15 5 P [hp] P [kw] 1.6 1... Ø. Ø. Qmin IPL 1.5-59/1- IPL 1.5-6/95- IPL 1.5-/9- % 61% Wilo-IPL 1.5-59/1- Wilo-IPL 1.5-/9-5 RPM - 6 Hz - North America 1.5 hp %.75 hp Ø. 1 hp H[m] 1... Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated 1½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems 6 1 Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL 1.5-/9-1½ 1 15 / 17 11 / 1 / 9 / 5¼ / 9 / 1 9 / 1 15 / 7 1 5 1 / 5 7 / 56. lbs () (75) (9) (79) (9) (1) (1) (9) () (5) (17) (5) (17) () (51) 5.5 kg IPL 1.5-6/96-1½ 1 15 / 17 11 / 1 / 9 / 5¼ / 9 / 1 9 / 1 15 / 7 1 5 1 / 5 7 / 5. lbs () (75) (9) (79) (9) (1) (1) (9) () (5) (17) (5) (17) () (51) 6. kg IPL 1.5-59/1-1½ 1 15 / 17 11 / 1 / 9 / 5¼ / 9 / 1 9 / 1 15 / 7 1 5 1 / 5 7 / 5. lbs () (75) (9) (79) (9) (1) (1) (9) () (5) (17) (5) (17) () (51) 6. kg Flange Dimensions n x d L Dimensions - Inches (mm) DN ØD Ød 1 Øk n x d L 1.5 ¾ 7 / ½ x 9 / (11) (7) (9) ( x 1) Ø d 1 k Ø D Ø TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] IPL 1.5-/9-.75 1 9. /.9 -.7 115 / - 1 1 15 / 7.9-7.5 115 / - IPL 1.5-6/96-1.7-.6 / 1. - / 6 1 1. 575 1.5 1 / 115 / - IPL 1.5-59/1-1.5.9 -.6 /. - / 6 1.5 1. 575 WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz,5 ( Pole) 1 H[ft] Wilo-IPL -6/17- H[m] Wilo-IPL -/1-7 5 RPM - 6 Hz - North America Qmin 6 5 1 Ø. Ø. Ø. IPL -6/17- IPL -5/- IPL -/1-5% 5% 6% 6.% 6.% 6.5% 6% 5% hp 5% 1 hp 1.5 hp 1 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) 1 6 1 1 NPSH [ft] Ø. 1 1 1 P [hp]. Ø. 1.5 Ø. 1. Ø..5 1 Q[l/s] NPSH [m] 1 P [kw] 1... Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e lo f m x / UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia. a l 1 b 1 b b bmax c e f g l m p x IPL -/1- ¼ 17 7 / ½ 1 / 5¼ ¾ 9 / 1 9 / 1 15 / 7 11½ 5¾ 1 / 5 7 / 65.7 lbs (5) () (5) () (1) (1) () (9) () (5) (17) (9) () () (56) 9. kg IPL -5/- ¼ 17 7 / ½ 1 / 5¼ ¾ 9 / 1 9 / 1 15 / 7 11½ 5¾ 1 / 5 7 / 66.1 lbs (5) () (5) () (1) (1) () (9) () (5) (17) (9) () () (56) kg IPL -6/17- ¼ 17 7 / ½ 1 / 5¼ ¾ 9 / 1 9 / 1 15 / 7 11½ 5¾ 1 / 5 7 / 77. lbs (5) () (5) () (1) (1) () (9) () (5) (17) (9) () () (56) 5 kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 5¼ 7 / ½ x 9 / (1) (7) (1) ( x 1) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] 1 1 15 / 7.9-7.5 115 / - IPL -/1-1.7-.6 / 1. - / 6 1 1. 575 1.5 1 / 115 / - IPL -5/- 1.5.9 -.6 /. - / 6 1.5 1. 575 ø d1 ø k ø D 1 / 1.6-1 115 / - IPL -6/17-6. - 5. /.9 - / 6. 575 WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL.5 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM 6Hz,5 ( Pole) 1 5 6 H[ft] H[m] Wilo-IPL.5-65/7- Qmin Wilo-IPL.5-5/6-5 RPM - 6 Hz - North America 7 6 5 1 Ø.5 5% 6% 5% 6% 6% 6% 6% 6% 5% 5 1 15 5 6% 5% hp 1 1 5 6 NPSH [ft] 1 Ø. IPL.5-65/7- IPL.5-5/6-5 1 15 5 6% 69.5% hp Ø.5 1 NPSH [m] 1. 1 5 6 P [hp] P [kw].5 Ø.5. 1.5 Ø. 1. 1.5 5 1 15 5 7% Q[l/s] Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: Materials of Construction Pump volute Impeller Shaft Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits 1~115 / - V, 6 Hz ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated ½ with ¼ pressure gauge tappings Cast Iron 15 PSI (1 Bar) Engineered composite L stainless steel stub shaft Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia a l 1 b 1 b b bmax c e f g l m p x IPL.5-5/6- ½ 5 / 1 7 / 11 / 5¾ 9 5 / 1 / 1 9 / 1 15 / 7 1½ 6¾ 1 5 7 / 91. lbs (65) (9) (5) (99) (119) () (5) (1) () (5) (17) () (171) (5) (67) 1. kg IPL.5-65/7- ½ 5 / 1 7 / 11 / 5¾ 9 5 / 1 / 1 9 / 1 15 / 7 1½ 6¾ 1 5 7 / 6.7 lbs (65) (9) (5) (99) (119) () (5) (1) () (5) (17) () (171) (5) (67) 9. kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L.5 7 5 / 5½ X ¾ (17) (11) (1) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V] 1 / 1.6-1 115 / - IPL.5-5/6-6. - 5. /.9 - / 6. 575 IPL.5-65/7-.5 - / - / 6 575 ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx
Wilo IPL 5 RPM Project: Engineer: Contractor: Submitted By: Date: Approved By: Date: Tag # Model # Flow Head HP Cycle Phase Voltage RPM IPL -56/- 6Hz,5 ( Pole) 6 1 H[ft] H[m] Wilo-IPL -56/- 5 RPM - 6 Hz - North America 6 Qmin 1 5 Ø.1 IPL -56/- 6% 7% 7% 7.7% 7% 7% 1 1 1 Technical Data Temp Range: 15 F to + 5 F (-1 C to +1 C) Power Supply Motor Options Flange Connection Max operating pressure: ~- / 6 V, 6 Hz ~575 V, 6 Hz TEFC, (ODP Opt), EPACT Rated with ¼ pressure gauge tappings 15 PSI (1 Bar) 1 6% hp 6 Materials of Construction Pump volute Cast Iron Impeller Engineered composite Shaft L stainless steel stub shaft 1 5 1 15 5 6 1 NPSH [ft] Ø.1 1 1 6 1 P [hp] Ø.1 1 1 Q[l/s] NPSH [m] 1 P [kw].5. 1.5 1..5 Mechanical seal Applications Hot water heating Air conditioning Closed cooling circuits Q1Q1XGG (silicium carbide seal faces, HNBR elastomers) Industrial circulation Solar Systems Geothermal Systems Approval Stamp WIL-SDS-IPL1-1-1
Dimensions & Weights a l 1 max* c 1/ Vent Plug x e f lo m x ½ 1 UNC p ø g* b 1 b b * b max* * Dimensions specific to motor manufacturer Dimensions and Weights Dimensions-inches (mm) Weight Model Dia a l 1 b 1 b b bmax c e f g l m p x 15 / 1 1 / ¼ 5 5 / 5¾ 1 5 5 / 1 9 / / 7 1 7 1 5 7 / 97.7 lbs IPL -56/- () (1) (6) (1) (15) () (5) (15) () (55) (17) (56) (17) (5) (69). kg Flange Dimensions Dimensions - Inches (mm) DN DN ØD Ød 1 Øk n x d L 7½ 5 1 / 6 X ¾ (191) (1) (15.) ( x 19) n x dl TEFC Motor Data P Phase FLA Voltage Model [HP] [~] [A] [V].5 - / - / 6 IPL -56/- 575 ø d1 ø k ø D WILO USA LLC WILO Canada Inc. WILO Mexico Tel: (66) 95-67 Fax: (7) -955 Web: www.wilo-usa.com Email: info@wilo-usa.com Tel: (66) 95-66 Fax: () 77-956 Web: www.wilo-canada.com Email: info@wilo-canada.com Tel: +5 55 556 9 Fax: +5 1 55 51 5 Web: www.wilo-mexico.com.mx Email: info@wilo.com.mx