Feed-through terminals



Similar documents
Feed-through terminal block - SSK 110 KER-EX

picomax The Pluggable Connection System

Spring Cage Feed-Through Terminal Blocks ST

HARAX circular connector

01. HARTING RJ INDUSTRIAL RJ45 ETHERNET CONNECTORS

Digital input modules

Programmable set for Ethernet Modbus/TCP in IP67 TI-BL67-PG-EN-2

Terminals, W-Series. Contents. Terminals, W-Series. Terminals, W-Series. Terminals, TS 15. Stud terminals. Accessories. Terminals, SAK-Series E.

Amphenol C 091 A/B/D. Circular Connectors. Amphenol-Tuchel Electronics GmbH

Block width on rail (mm) Standard block* is shown on blue background

Directory chapter 04

ZS4-S-T Screw Clamp Terminal Blocks Disconnect with blade - with test socket

RY2 miniature industrial relays

400 Series Buccaneer BUCCANEER POWER. bulgin

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U Technical characteristics types D and E

Socket P2RF-05-S P2RF-08-S Clip & Release Lever R99-11 nameplate for MY

V REG.-Nr , Z E Technical data 2-pole 4-pole Rated current 12 A 6 A SCHRACK. Accessories Miniature Relay PT. General Purpose Relays

UTS discrete wire sealing

HSP GmbH Zum Handwerkerhof Wendelstein Tel / Fax: / Web: HSP@hsshsp.de NTG-3000.

Fuses for Semiconductor Protection - Cylindrical Fuses. Class: Voltage ratings: Current ratings: Standards: Approvals: Features and Benefits

General Purpose Relays Accessories. Accessories Miniature Relay PT

Jumper bar BJM. Assembled jumper bar BJD. Assembled jumper bar

OPERATING INSTRUCTIONS

400 Series - Mini USB Buccaneer

3-Component Measuring System

Cable Plug acc. to DIN EN , Form A

ZS6-S Screw Clamp Terminal Blocks Disconnect with blade

08. SEK IDC CONNECTORS

1 Introduction - Advice Conductor Rails Track Coupler Power feeds Air Gap Insulation Section... 6

COB panel supports for multipole connectors

Set for PROFINET IO in IP20 TI-BL20-EN-PN-4

14 PHOENIX CONTACT Courtesy of Power/mation Energy Lane, Saint Paul, MN

ZS4-SF1-T Screw Clamp Terminal Blocks For 5 x 20 and 5 x 25 fuses - with test socket

PCB transformers. Short circuit proof PCB transformer VB. General Data. Advantages. Applications. Circuit diagram. Standards & 1 Certifications W v

Actuator-Sensor-Interface

J TB/TW Temperature limiter, temperature monitor

HARTING Ethernet Cabling 4-poles Overview

This product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.

ZS25 Screw Clamp Terminal Blocks Feed-through

HARTING Ethernet Cabling 8-poles Overview

Magnetic and Hydraulic-Magnetic Circuit Breaker 8340-G2...

Series 8146/5-V37 and Series 8150/5-V37

Universal MATE-N-LOK Connectors

Automation Solutions. LÜTZE LCOS empty housing for Industrial Automation

Electronic housing BC for distributor boards

Type: DILM115(RAC240) Article No.: Sales text Contactor,55kW/400V,AC operated. Ordering information

0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.8 U N /0.5 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N 0.2 U N /0.1 U N

Example of use: Fuse for a solenoid valve. If the fuse is defective, no information is sent to the electronic component.

Aluminium Standard. Technical Data. Included in delivery

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5

IP 20 B.1 8 IP 65 / IP 67 B Cables B Tools B IP 20 B.2 8 IP 65 / IP 67 B Cables B Tools B IP 20 B.

NA1FC7T. Fuse holder terminal blocks

gesis IP + Heavy Duty Class I, Zone 2

Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series

Powermate Range Pitch 7.62

G7SA. Ordering Information. Slim Plug-In Safety Relay. Slim Safety Relay for Machine Control. H Slim body only 13 x 24 x 50 mm

Square D Clipsal DIN-Rail Four-Channel Auxiliary Input Unit

Trapezoidal-Connectors Series TMC

H/L = Power supply. FN = Nominal Frequency. RN = Rated value of output burden. UN = Nominal input voltage. IN = Nominal input current.

RISH CON - Hz. Salient Features : Application : Product Features: FREQUENCY TRANSDUCER

EPIC CIRCON M23 Series Circular Signal Connectors

DEK-REL- 24/1/SEN. Extract from the online catalog. Order No.:

Programmable set for Ethernet Modbus/TCP in IP20 TI-BL20-PG-EN-8

Solenoid Valve Island Type 3965

Technical data sheet TDS0070

Transmitter Actuator 230V wave UP 560. Operation

Magnetic field sensor for pneumatic cylinders BIM-INT-Y1X-H1141

TECHNICAL DATASHEET Incremental Encoder RI 58-D / RI 58TD

IEC Connectors. Introduction

Product and functional description

Linear Luminaire for Fluorescent Lamps Series EXLUX 6001

Mounting Plate / Screwdriver. Alignment Stickers Screws / Desiccant Bag / Double-sided Tape / Rubber Seal Plug / Rubber Washer

Intersection Preassembled 19-inch Rack

W DATA SHEET: RESIDUAL CURRENT CIRCUIT BREAKER A, SERIES BCF0 AND BCF6

DBS720 / FDS221-R / FDS221-W Sounder base, Alarm sounders

Product and Applications Description. Application Programs. Example of Operation. GAMMA instabus Technical Product-Information.

Set for Profibus DPV1 in IP20 TI-BL20-DPV1-8

Terminal Boxes Series 8146

3x cinch/s-video socket Order no.: xx. USB/3.5 mm audio socket Order no.: xx. VGA socket Order no.: xx

Main Catalog. Terminal blocks Insulation displacement ADO System

Valve series MN-06 acc. to NAMUR, 3/2-way G1/4 750 Nl/min (0.762 Cv)

CIN::APSE MICROMINIATURE D-SUB

PC 4/ 4-ST-7,62. Extract from the online catalog. Order No.:

Anderson Power Products

7000 Series Buccaneer

Relays High Capacity 50 Amp Mini Relays Standard Mini Relays Micro Relays Power Relays Connector Modules

Air damper actuators

Temperature Sensors. Accessories. for Injection Molding. Types 6192B, 6193B,

Vario-Series Accessories

Electronic overload relay EF19 and EF45

48 SERIES Relay interface modules 10 A

HERZ-Thermal Actuators

BETAtrans. Cables and Systems for Rolling Stock. Edition 2006

Positive-guided relay outputs: 3 safety contacts (N/O), instantaneous. 1 auxiliary contact (N/C), instantaneous

pole, 8 A Safety relay. Screw terminal. 35 mm rail (EN 60715) mounting. 2 CO (DPDT) 8/15 250/400 2, /0.65/0.

HARTING Ethernet Cabling 4-poles Overview

KNX Interface. User Manual PM00A00IRI

Rutenbeck Network Connection Box Cat. 5, shielded. Cable installation. UAE Connection Box Cat. 5 Operating Instructions.

Transcription:

s Screw connection system RKB 4 BKA 2,5 BKA 4 BKA 0 Rail mount on TS 5 / TS 32 / TS 35 / Direct mounting Connection diagram M 3 M 2,5 M 3 M 4 Connection type Dimension (L x W x H) with TS 5 mm with TS 32 mm with TS 35 x,5 mm Direct mounting Gauge plug acc. to EN 60 4- / Flammability class UL 4 For certifications and approvals Flexible/Flexible (with ADH acc. to DIN 46 228/) mm 2 Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories End plate AP beige blue Partition plate TW beige blue Insulation plate TRS 2 poles Outer insulated cross connector A poles 3 poles Outer insulated cross connector A poles 4 poles Outer insulated cross connector A poles 0 poles Outer insulated cross connector AQI0 poles End holder EH/Direct mounting screw Endhalter EH/Rail mounting End holder EH/Direct mounting pin Screw driver Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 2 x 6 x 2,5 RKB 4 beige 08.2/00 RKB 4 blue 08.5/00 * 32 30 30 4 22-0 4 3 0,2-2,5 AP,5-4 238.2/50 238.5/50 TW,5-4 20.2/50 20.5/50 2566.2/00 208.0/20 208.0/0 Q 0 200.0/0 EH 235.2/50 086.0/ 22 x 5 x 23 BKA 2,5/ beige 320.2/00 BKA 2,5/ blue 320.5/00 400 300 300 24 20 20 2,5 22-2 0,2-2,5 A/5/ 2032.0/50 A/5/ 2033.0/50 A/5/ 2044.0/50 AQI 0/5/ 2045.0/0 EH 2 236.2/50 EH 5/BKA 245.2/50 EH 2-Z 24.2/50 086.0/ 22 x 6 x 23 BKA 4/ beige 258.2/00 BKA 4/ blue 258.5/00 400 300 300 32 30 25 4 22-0 A/6/ 225.0/50 A/6/ 226.0/50 A/6/ 240.0/50 AQI 0/6/ 2045.0/0 EH 2 236.2/50 EH 5/BKA 245.2/50 EH 2-Z 24.2/50 086.0/ 30 x 8 x 3 BKA 0/ beige 4.2/50 BKA 0/ blue 4.5/50 400 300 300 5 5 5 0 22-8 A5 V2 0,2-0 - 0,2-0 - 0 A/8/ 206.0/50 A/8/ 2068.0/50 A/8/ 206.0/50 EH 3 23.2/20 EH 35/BKA 246.2/50 08.0/ 4

SRK 2,5/5 RK,5-4/5 SRK 2,5 RK,5-4 M 2,5 M 3 M 2,5 M 3 26 x 5 x 2,5 2 x 6 x 34,5 45 x 5 x 43,5 45 x 5 x 3 45 x 6 x 48 45 x 6 x 43,5 SRK 2,5/5 beige 035.2/00 SRK 2,5/5 blue 035.5/00 24 5 20 2,5 22-4 RK,5-4/5 beige 00.2/00 RK,5-4/5 blue 00.5/00 RK,5-4/5/STB 03.2/00 32 30 40 4 22-0 SRK 2,5 beige 030.2/00 SRK 2,5 blue 030.5/00 24 5 20 2,5 22-4 RK,5-4 beige 05.2/00 RK,5-4 blue 05.5/00 RK,5-4/STB 00.2/00 32 30 40 4 22-0 0,2-2,5 0,2-2,5 AP 2,5/5 242.2/50 242.5/50 TW 2,5/5 2428.2/50 2428.5/50 2422.0/50 AP,5-4 238.2/50 238.5/50 TW,5-4 20.2/50 20.5/50 2566.2/00 208.0/20 AP-SR 200.2/50 200.5/50 TW 2,5 2426.2/50 2426.5/50 208.0/20 AP,5-4 238.2/50 238.5/50 TW,5-4 20.2/50 20.5/50 2566.2/00 208.0/20 2423.0/50 2424.0/20 208.0/0 208.0/0 208.0/0 Q 0 2425.0/0 Q 0 200.0/0 Q 0 200.0/0 Q 0 200.0/0 085.0/ 086.0/ 085.0/ 086.0/ 5

s Screw connection system RK 2,5 RK 2,5/35 N/2 Q RK 2,5-4 RK 2,5-4/35 Rail mount on TS 32 / TS 35 Connection diagram M 2,5 M 2,5 M 3 M 3 Connection type Dimension (L x W x H) with TS 32 mm with TS 35 x,5 mm Gauge plug acc. to EN 60 4- / Flammability class UL 4 For certifications and approvals Flexible/Flexible (with ADH acc. to DIN 46 228/) mm 2 Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories End plate AP beige blue Partition plate TW beige blue Insulation plate TRS Screw driver Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 6 48 x 5 x 5,5 48 x 5 x 4 RK 2,5 beige 26.2/00 RK 2,5 blue 26.5/00 RK 2,5 DS beige 48.2/00 ) RK 2,5 DS blue 48.5/00 ) 24 20 20 2,5 22-2 0,2-2,5 AP 2,5-0 200.2/50 200.5/50 TW 2,5-0 2566.2/00 256.0/50 2568.0/50 256.0/20 Q 0 250.0/0 085.0/ ) cross connection not possible 62,5 x 5, x 4 RK 2,5/35 N/2 Q/35 beige 54.2/00 RK 2,5/35 N/2 Q/35 blue 54.5/00 RK 2,5/35 N/S/2 Q/35 beige 55.2/00 2) RK 2,5/35 N/S/2 Q/35 blue 55.5/00 2) 24 20 20 2,5 22-4 0,2-2,5 2 AP 2,5-0 200.2/50 200.5/50 TW 2,5-0 Z,5/2 30.8/50 Z,5/3 3.8/50 Z,5/4 32.8/20 Z,5/5 33.8/20 Z,5/6 34.8/20 Z,5/ 35.8/20 Z,5/8 36.8/0 Z,5/ 3.8/0 Z,5/0 38.8/0 085.0/ 2) with screen rail 48 x 6 x 5,5 48 x 6 x 4 RK 2,5-4 beige 00.2/00 RK 2,5-4 blue 00.5/00 RK 2,5-4/STB beige 008.2/00 3) RK 2,5-4 DS beige 4.2/00 ) RK 2,5-4 DS blue 4.5/00 ) 32 40 40 4 22-0 0,2-6 - 0,2-6 0,2-6 2 AP 2,5-0 200.2/50 200.5/50 TW 2,5-0 TRS 2003.2/00 20.0/50 240.2/50 2020.0/50 24.2/50 202.0/20 242.2/20 Q 0 2022.0/0 QI 0 243.2/0 086.0/ 3) with connector socket 48 x 6 x 4 RK 2,5-4/35 beige 5.2/00 RK 2,5-4/35 blue 5.5/00 32 32 32 4 22-0 0,2-6 - 0,2-6 0,2-6 2 AP 2,5-0 200.2/50 200.5/50 TW 2,5-0 TRS 2003.2/00 20.0/50 240.2/50 2020.0/50 24.2/50 202.0/20 242.2/20 Q 0 2022.0/0 QI 0 243.2/0 086.0/

RK 6-0 RK 6-0/35 RK 6 RK 6/35 N RK 35 RK 35/35 N M 4 M 4 M 5 M 5 M 6 M 6 CONTA-CONNECT 48 x 8 x 5,5 48 x 8 x 4 48 x 8 x 4 50 x 2 x 63 50 x 2 x 58,5 54 x 2 x 4 58 x 6 x 6 58 x 6 x,5 58 x 6 x 52 RK 6-0 beige 005.2/00 RK 6-0 blue 005.5/00 RK 6-0 DS beige 8.2/00 ) RK 6-0 DS blue 8.5/00 ) * 0 22-6 A5 V2 RK 6-0/35 beige 58.2/00 RK 6-0/35 blue 58.5/00 0 22-8 A5 V2 RK 6 beige 050.2/50 RK 6 blue 050.5/50 RK 6/IS beige 42.2/50 4) RK 6/IS blue 42.5/50 4) RK 6/Z beige 62.2/50 5) RK 6/Z blue 62.5/50 5) RK 6/Z-IS beige 43.2/50 4)5) RK 6/Z-IS blue 43.5/50 4)5) IEC UL* CSA 6 85 85 6 0-4 B V2 RK 6/35 N beige 5.2/50 RK 6/35 N blue 5.5/50 RK 6/35 N/Z beige 53.2/50 5) RK 6/35 N/Z blue 53.5/50 5) 6 85 85 6 2-4 B V2 RK 35 beige 052.2/20 RK 35 blue 052.5/20 RK 35/IS beige 44.2/20 4) RK 35/IS blue 44.5/20 4) RK 35/Z beige 63.2/20 5) RK 35/Z blue 63.5/20 5) RK 35/Z-IS beige 45.2/20 4)5) RK 35/Z-IS blue 45.5/20 4)5) 25 0 5 35 2-2 B V2 RK 35/35 N beige 52.2/20 RK 35/35 N blue 52.5/20 RK 35/35 N/Z beige 54.2/20 5) RK 35/35 N/Z blue 54.5/20 5) 25 0 5 35 2-2 B V2 0,2-0 0,2-0 0,2-0 0,2-0 0,2-0 2 0,2-0 0,2-0 0,2-0 0,2-0 0,2-0 2,5-6 2,5-25 2,5-6 2,5-6 2,5-25 5 2,5-6 2,5-25 2,5-6 2,5-6 2,5-25 5 2,5-6 2,5-35 2,5-35 2,5-35 2,5-35 20 2,5-6 2,5-35 2,5-35 2,5-35 2,5-35 20 AP 2,5-0 200.2/50 200.5/50 TW 2,5-0 TRS 2003.2/00 2060.0/50 250.2/50 206.0/50 25.2/50 2062.0/20 252.2/20 Q 0 2063.0/0 QI 0 253.2/0 AP 2,5-0 200.2/50 200.5/50 TW 2,5-0 TRS 2003.2/00 2060.0/50 250.2/50 206.0/50 25.2/50 2062.0/20 252.2/20 Q 0 2063.0/0 QI 0 253.2/0 AP 6 204.2/50 204.5/50 TW 6 205.2/50 205.5/50 22./20 23.0/20 24.0/0 Q 0 25.0/0 225.0/20 2258.0/20 2265.0/0 Q 0 2266.0/0 AP 35 26.2/20 26.5/20 TW 35 2.2/20 2.5/20 264.0/20 265.0/20 266.0/0 Q 0 26.0/0 264.0/20 265.0/20 266.0/0 Q 0 26.0/0 08.0/ 08.0/ 08.0/ 08.0/ SDB,2 x 6,5 088.0/ SDB,2 x 6,5 088.0/ ) cross connection not possible 4) with hexagon socket screw 5) with housing pins

s Screw connection system RK 50 RK 5 RK 50 RK 240 Rail mount on TS 32 / TS 35 M 6 M 8 M 0 M 0 Connection diagram Connection type Dimension (L x W x H) with TS 32 mm with TS 35 x,5 mm Gauge plug acc. to EN 60 4- / Flammability class UL 4 For certifications and approvals Flexible/Flexible (with ADH acc. to DIN 46 228/) mm 2 Contact wire range mm 2 Features Number of cross connection channels Test pick-off feature Accessories Outer insulated cross connector A poles Outer insulated cross connector A poles Cover AD Inlay profile EP Hexagon socket screw key ISKS Pick off terminal MAG 8 x 20 x 82 x 20 x 6,5 RK 50 beige 20.2/0 RK 50 blue 20.5/0 000 600 600 50 50 50 50 /0-6 B0 V2 0-6 6-50 6-50 6-50 0-50 2 A/50 263.2/5 A/50 264.2/5 AD /50 280.0/20 224.0/0 ISKS 5 288.0/ MAG 50 2.2/0 84 x 25 x 4 84 x 25 x 88,5 RK 5 beige 22.2/0 RK 5 blue 22.5/0 000 600 600 232 230 230 5 4/0-2 B2 V2-35-5 50-5 50-5 35-5 30 A/5 265.2/5 A/5 266.2/5 AD /5 2804.0/20 EP 5 225.0/0 ISKS 6 22.0/ MAG 5 23.2/0 3 x 3 x 8,5 3 x 3 x 2,8 RK 50 beige 24.2/5 RK 50 blue 24.5/5 000 600 600 30 25 25 50 300-2 B4 V2-25-50 35-50 35-50 25-50 38 A/50 26.2/5 A/50 268.2/5 AD /50 2806.0/20 22.0/0 ISKS 8 23.0/ MAG 50/240 25.2/0 3 x 36 x 32 3 x 36 x 26,3 RK 240 beige 26.2/5 RK 240 blue 26.5/5 000 600 600 380 30 30 240 500-2/0 B6 V2-50-240 0-240 0-240 50-240 38 A/240 26.2/5 A/240 20.2/5 AD /240 2808.0/20 EP 240 2360.0/0 ISKS 8 23.0/ MAG 50/240 25.2/0 Further accessories Further accessories like marking systems, test adapters, covers, end brackets etc. you can find on the pages for accessories specified below! * Applies 8

Feed-Through Terminal Accessories RK 50 to RK 240 The terminal blocks RK 50 to RK 240 consist of a double shell insulating terminal carrier and due to the special construction of the strain-relief clamp, offer low transitional resistance between the conductor and the contact rail. A broad accessory programme effectively completes this series. CONTA-CONNECT Measurement Pick-Up Terminals MAG MAG measurement pick-up terminals allow the voltage to be picked up on terminal blocks with a larger cross sections by conductors with smaller cross sections from 0.2 to 0 mm 2. MAG connection elements are introduced into the respective terminal block above the mains lead-in and make contact with the contact rail through the connection screw of the main terminal block. This ingenious and safe technical solution simplifies wiring considerably. Measurement Pick-Up Terminals MAG MAG 50 MAG 5 MAG 50/240 Gauge plug acc. to EN 60 4- / Flammability class UL 4 Flexible/Flexible (with ADH acc. to DIN 46 228/) mm 2 For terminal MAG 50 2.2/0 IEC UL* CSA* 000 600 600 0/22-6 6 3 A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 50 MAG 5 23.2/0 IEC UL* CSA* 000 600 600 0/22-6 6 3 A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 5 MAG 50/240 25.2/0 IEC UL* CSA* 000 600 600 0/22-6 6 3 A5/V2 0,2-0 0,2-0 0,2-0 0,2-0 2 RK 50, RK 240 Insertion Plates EP When connecting band conductors, it is necessary to put insertion plates in the strain-relief clamps. The EPs compensate for the V-form geometry in the strain-relief clamps (terminal cage). This also affords the band conductor a safe and dependable connection. Insertion Plates EP EP 5 EP 240 For terminal 224.0/0 RK 50 EP 5 225.0/0 RK 5 22.0/0 RK 50 EP 240 2360.0/0 RK 240

2026 © DocPlayer.net Privacy Policy | Terms of Service | Feedback  | Do Not Sell My Personal Information