Geberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008

Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008

Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39 Mapress Carbon Steel Page 51 Mapress CuNiFe Page 75 Mapress Accessories Page 85 Tools Page 95 Appenix an Inex Page 123 Mapress Catalogue 2008/2009 1

Abbreviation Abbreviation Dimension Designation D cm Outsie iameter iø mm Insie iameter Ø mm Outsie iameter E cm Insertion epth G " (inch) Pipe threas where pressure-tight joints are not mae on the threas (ISO 228/1) cm eight 1 cm Part height K cm Max. shorting k cm Flange, iameter of bolt circle cm ength l cm ength part imension (m) m Pipe length m cm Diameter of bolt holes M mm Metric threas (ISO 216) R " (inch) Outsie threa, tapere, threas where pressure-tight joints are mae on the threa Rp " (inch) Screw threa joint s mm Wallthickness cm -Dimension Plug IEC-83/C6 EN 50075 SS I CEE 17 yellow IEC 60884-1 SS XVII-CEE7 CEE 50V 2P 32A 12h IP44 BS 1363A Nema 1-15P Designation EU, 230 V EU, 230 V EU, 230 V EU, 230 V EU, 48 V GB, 230 V USA, 125 V Compatibility Geberit compatibility 1 Geberit compatibility 2 Geberit compatibility 3 Designation For Geberit Mepla an Geberit Mapress For Geberit Mepla an Geberit Mapress For Geberit Mapress 2 Mapress Catalogue 2008/2009

Mapress Stainless Steel Description Mapress Pipes Pipes Page 4 Bens with plain ens Page 4 Couplings Page 6 Bens Page 7 Pipe briges Page 8 Reucers Page 9 T-pieces Page 9 Mapress Fittings Aapters Page 13 Elbow aapters Page 14 Connectors Page 15 Aapter unions Page 16 Straight unions Page 18 Flanges Page 19 Expansion fittings Page 21 Bulkhea an eck passings Page 21 Closures Page 21 Mapress Catalogue 2008/2009 3

Geberit Mapress Mapress Stainless Steel System pipes / Bens with plain ens Mapress System pipes Stainless / Bens Steel with plain ens System pipes Mapress Stainless Steel system pipe For sanitary, gas an inustrial applications Corrosion-resistant Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Thermal expansion 0.016 mm/(m K) Thermal conuctivity pipe 15 W/(m K) Surface roughness 1.5 μm Delivery in sections Small bunle (m) Ø iø s [m] 39202 15 13 1 6 39203 18 16 1 6 39204 22 19,6 1,2 6 39205 28 25,6 1,2 6 39206 35 32 1,5 6 39207 42 39 1,5 6 39208 54 51 1,5 6 39209 76,1 72,1 2 6 39210 88,9 84,9 2 6 39211 108 104 2 6 i s Delivery in sections arge bunle Bens with plain ens Ø Ben with plain ens 15 iø s [m] 39402 15 13 1 5,7 39403 18 16 1 5,7 39404 22 19,6 1,2 5,7 39405 28 25,6 1,2 5,7 39406 35 32 1,5 5,7 39407 42 39 1,5 5,7 39408 54 51 1,5 5,7 39409 76,1 72,1 2 5,7 39410 88,9 84,9 2 5,7 39411 108 104 2 5,7 Bens with plain ens 1 K1 K For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 15 Mapress Stainless Steel system pipe (Container length) (m) For sanitary, gas an inustrial applications Corrosion-resistant Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 i s Ø 1 K K1 30892 15 6 12,2 2,1 8,3 30893 18 5,5 12,8 1,5 8,8 30894 22 5 12,4 0,7 8,1 30905 28 4,5 13,4 0 8,9 30906 35 7,3 22,2 2 16,9 30907 42 8,9 28 3 22,1 30908 54 12,2 33,7 4,5 26 30909 76,1 22,8 22,8 6,5 6,5 30910 88,9 24 24 8 8 30911 108 24,9 24,9 9,5 9,5 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Thermal expansion 0.016 mm/(m K) Thermal conuctivity pipe 15 W/(m K) Surface roughness 1.5 μm 4 Mapress Catalogue 2008/2009

Bens with plain ens Ben with plain ens 30 K 1 K1 Ø Geberit Mapress Mapress Stainless Steel 1 K K1 30876 35 9,4 20,6 2 13,2 30877 42 11,4 26,2 0,1 14,9 30878 54 14,6 32,1 3,7 21,2 30879 76,1 22,5 22,5 6,9 6,9 30880 88,9 26,7 26,7 10,3 10,3 30881 108 29,3 29,3 6,6 6,6 For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 30 Ø 1 K K1 30932 15 6 12,2 2,1 8,3 30933 18 5,5 12,8 1,6 8,9 30934 22 5 12,4 0,6 8 30935 28 5,1 13 0 7,9 30936 35 8 21,4 2 15,4 30937 42 9,9 27,2 3 20,3 30938 54 13,4 32,6 5,5 24,7 30939 76,1 20,1 20,1 6,6 6,6 30940 88,9 24,1 24,1 8 8 30941 108 26,3 26,3 9,5 9,5 Ben with plain ens 45 1 K1 K Ben with plain ens 60 For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) Prouct Details 1 K1 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 60 Ø 1 K K1 30942 15 6 12,2 2,1 8,3 30943 18 6,2 12,2 1,6 7,6 30944 22 6 11,8 0,5 6,3 30955 28 6,3 12,1 0 5,8 30956 35 9,7 20,3 2 12,6 30957 42 12 25,6 3 16,6 30958 54 16,2 30,6 5,5 19,9 30959 76,1 21,5 21,5 6,5 6,5 30960 88,9 25,6 25,6 8 8 30961 108 29,2 29,2 9,5 9,5 K For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 45 Ø 1 K K1 30872 15 6,2 12 1,9 7,7 30873 18 5,8 12,4 1,6 8,2 30874 22 5,6 12 0,7 7,1 30875 28 5,8 12,2 0,2 6,6 Mapress Catalogue 2008/2009 5

Geberit Mapress Mapress Stainless Steel Couplings Ben with plain ens 75 1 K Ø 1 K 30407 42 15 25 3 13 30408 54 20 30 5,5 15,5 30409 76,1 25 25 6,2 6,2 30410 88,9 29,1 29,1 9 9 K1 30411 108 36,4 36,4 4,5 4,5 K1 For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) Couplings Couplings Coupling Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 75 Ø 1 K K1 30862 15 6,6 11,7 2,2 7,3 30863 18 6,5 12 1,7 7,2 30864 22 6,4 11,8 0,9 6,3 30865 28 7,1 11,4 0,7 5 30866 35 11 20 2,9 11,9 30867 42 13,7 25,1 4,4 15,8 30868 54 17,8 30,5 6 18,7 30869 76,1 24 24 6,2 6,2 30870 88,9 28 28 9 9 30871 108 34,5 34,5 6 6 Ben with plain ens 90 1 K1 For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) K For sanitary an inustrial applications eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black Ø 32002 15 4,8 0,8 32003 18 4,8 0,8 32004 22 5 0,8 32005 28 5,4 0,8 32006 35 6,2 1 32007 42 7,1 1,1 32008 54 8,3 1,3 32009 76,1 14,1 3,5 32010 88,9 16,2 4,2 32011 108 19,4 4,4 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Ø 1 K K1 30402 15 7 12 2,2 7,2 30403 18 7 12 1,7 6,7 30404 22 7 12 0 5 30405 28 8 12 0 4 30406 35 12 20 2 10 6 Mapress Catalogue 2008/2009

Bens Slip coupling For sanitary an inustrial applications eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black Ø E E 32102 15 2,5 8 32103 18 2,5 8 32104 22 2,5 8,4 32105 28 3 9,1 32106 35 3 10,2 32107 42 4 12 32108 54 4 14 32109 76,1 6 23 32110 88,9 7 26 32111 108 8 31 E Ben 90 with plain en For sanitary an inustrial applications Plain en eaky if unpresse Prouct Details Ø Geberit Mapress Mapress Stainless Steel 30102 15 4,9 2,9 30103 18 5,3 3,3 30104 22 6,1 4 30105 28 7,2 4,9 31106 35 6,8 4,2 31107 42 8 5 31108 54 10 6,5 31109 76,1 15,3 10 31110 88,9 17,9 11,9 31111 108 22,2 14,7 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Bens Bens Ben 90 For sanitary an inustrial applications eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø 30302 15 5,9 4,9 2,9 30303 18 6,1 5,3 3,3 30304 22 7 6,1 4 30305 28 7,9 7,2 4,9 33306 35 7,7 6,8 4,2 33307 42 9 8 5 33308 54 11,1 10 6,5 33309 76,1 16,6 15,3 10 33310 88,9 19,4 17,9 11,9 33311 108 24 22,2 14,7 Seal rings CIIR black Mapress Catalogue 2008/2009 7

Geberit Mapress Mapress Stainless Steel Ben 45 For sanitary an inustrial applications eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 45 Seal rings CIIR black Ø 30602 15 3,6 1,6 30603 18 3,7 1,7 30604 22 4,2 2,1 30605 28 4,8 2,5 32606 35 4,3 1,7 32607 42 5,1 2,1 32608 54 6,2 2,7 32609 76,1 9,7 4,4 32610 88,9 11,2 5,2 32611 108 13,9 6,4 Ben 45 with plain en Pipe briges Pipe brige Ø Pipe briges For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) For parallel pipes with istance 30702 15 4,5 3,6 1,6 30703 18 4,2 3,7 1,7 30704 22 5,2 4,2 2,1 30705 28 5,6 4,8 2,5 32706 35 5,3 4,3 1,7 32707 42 6,1 5,1 2,1 32708 54 7,3 6,2 2,7 32709 76,1 11,1 9,7 4,4 32710 88,9 13 11,2 5,2 32711 108 15,7 13,9 6,4 Pipe briges Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø 1 2 30802 15 5,7 15,8 3,7 30803 18 6 16,5 4 30804 22 6,5 17,8 4,4 30805 28 7,4 21 5 1 2 For sanitary an inustrial applications Plain en eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 45 Seal ring CIIR black 8 Mapress Catalogue 2008/2009

Reucers / T-pieces Geberit Mapress Mapress Stainless Steel Reucers / T-pieces Reucers Reucer with plain en T-pieces T-pieces T-piece 90 equal For sanitary an inustrial applications 1 1 1 l l For sanitary an inustrial applications Plain en eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Ø 1Ø 32303 18 15 3,5 5,5 32305 22 15 3,9 5,9 32306 22 18 3,7 5,7 32307 28 15 4,6 6,6 32308 28 18 4,4 6,4 32309 28 22 3,9 6 32310 35 15 5,5 7,5 32311 35 18 5,4 7,4 32312 35 22 5 7,1 32313 35 28 4,5 6,8 32314 42 15 6,1 8,1 32315 42 18 6 8 32316 42 22 6,1 8,2 32317 42 28 6 8,3 32318 42 35 5,1 7,7 32319 54 15 7,7 9,7 32320 54 18 7,6 9,6 32321 54 22 7,4 9,5 32322 54 28 8,7 11 32323 54 35 8 10,6 32324 54 42 6,2 9,2 32331 76,1 54 11,1 14,6 32338 88,9 54 12,8 16,3 32339 88,9 76,1 10,8 16,1 32345 108 54 13,7 17,2 32346 108 76,1 13,1 18,4 32348 108 88,9 14,3 20,3 eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø 1 l 1 31002 15 6,4 3,9 3,2 1,2 1,9 31003 18 6,8 4,1 3,4 1,4 2,1 31004 22 7,4 4,4 3,7 1,6 2,3 31005 28 8,4 5 4,2 1,9 2,7 31006 35 10 5,7 5 2,4 3,1 31007 42 11,4 6,5 5,7 2,7 3,5 31008 54 13,8 7,7 6,9 3,4 4,2 31009 76,1 23 11 11,5 6,2 5,7 31010 88,9 26 12,8 13 7 6,8 31011 108 31 15,3 15,5 8 7,8 Mapress Catalogue 2008/2009 9

Geberit Mapress Mapress Stainless Steel T-pieces T-piece 90 reuce 1 1 1 2 l l2 2 For sanitary an inustrial applications Reuce eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø 1Ø 2Ø 1 l l2 1 2 31204 18 15 18 6,8 4,1 3,4 3,4 1,4 2,1 1,4 31206 22 15 22 7,4 4,3 3,7 3,7 1,6 2,3 1,6 31207 22 18 22 7,4 4,3 3,7 3,7 1,6 2,3 1,6 31209 28 15 28 8,4 4,6 4,2 4,2 1,9 2,6 1,9 31210 28 18 28 8,4 4,6 4,2 4,2 1,9 2,6 1,9 31211 28 22 28 8,4 4,7 4,2 4,2 1,9 2,6 1,9 31212 35 15 35 10 4,9 5 5 2,4 2,9 2,4 31213 35 18 35 10 4,9 5 5 2,4 2,9 2,4 31214 35 22 35 10 5 5 5 2,4 2,9 2,4 31215 35 28 35 10 5,3 5 5 2,4 3 2,4 31216 42 15 42 11,4 5,3 5,7 5,7 2,7 3,3 2,7 31217 42 18 42 11,4 5,3 5,7 5,7 2,7 3,3 2,7 31218 42 22 42 11,4 5,4 5,7 5,7 2,7 3,3 2,7 31219 42 28 42 11,4 5,7 5,7 5,7 2,7 3,4 2,7 31220 42 35 42 11,4 6,1 5,7 5,7 2,7 3,5 2,7 31221 54 15 54 13,8 5,9 6,8 6,9 3,4 3,9 3,4 31222 54 18 54 13,8 5,9 6,8 6,9 3,4 3,9 3,4 31223 54 22 54 13,8 6 6,9 6,9 3,4 3,9 3,4 31224 54 28 54 13,8 6,3 6,9 6,9 3,4 4 3,4 31225 54 35 54 13,8 6,7 6,9 6,9 3,4 4,1 3,4 31226 54 42 54 13,8 7,1 6,9 6,9 3,4 4,1 3,4 31229 76,1 22 76,1 23 7,7 11,5 11,5 6,2 5,6 6,2 31230 76,1 28 76,1 23 7,9 11,5 11,5 6,2 5,6 6,2 31231 76,1 35 76,1 23 8,1 11,5 11,5 6,2 5,5 6,2 31232 76,1 42 76,1 23 8,1 11,5 11,5 6,2 5,1 6,2 31233 76,1 54 76,1 23 8,7 11,5 11,5 6,2 5,2 6,2 31236 88,9 22 88,9 26 8,5 13 13 7 6,4 7 31237 88,9 28 88,9 26 8,7 13 13 7 6,4 7 31238 88,9 35 88,9 26 9 13 13 7 6,4 7 31239 88,9 42 88,9 26 9,2 13 13 7 6,2 7 31240 88,9 54 88,9 26 9,3 13 13 7 5,8 7 31241 88,9 76,1 88,9 26 11,4 13 13 7 6,1 7 Continuation on the next page 10 Mapress Catalogue 2008/2009

T-pieces Geberit Mapress Mapress Stainless Steel Ø 1Ø 2Ø 31244 108 22 108 31 10,3 15,5 15,5 8 8,2 8 31245 108 28 108 31 10,5 15,5 15,5 8 8,2 8 31246 108 35 108 31 10,8 15,5 15,5 8 8,2 8 31247 108 42 108 31 11 15,5 15,5 8 8 8 31248 108 54 108 31 11,3 15,5 15,5 8 7,8 8 31249 108 76,1 108 31 12,4 15,5 15,5 8 7,1 8 31250 108 88,9 108 31 13,5 15,5 15,5 8 7,5 8 1 l l2 1 2 T-piece with female threa Rp 1 1 1 l l2 2 For sanitary an inustrial applications Female threa eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø Rp 1Ø 1 l l2 1 2 [''] 31304 15 1/2 15 6,4 4 3,2 3,2 1,2 2,7 1,2 31305 18 1/2 18 6,8 4,2 3,4 3,4 1,4 2,9 1,4 31306 18 3/4 18 6,8 4,4 3,4 3,4 1,4 2,9 1,4 31307 22 1/2 22 7,4 4,3 3,7 3,7 1,6 3 1,6 31308 22 3/4 22 7,4 4,6 3,7 3,7 1,6 3,1 1,6 31309 28 1/2 28 8,4 4,6 4,2 4,2 1,9 3,3 1,9 31310 28 3/4 28 8,4 4,9 4,2 4,2 1,9 3,4 1,9 31311 28 1 28 8,4 5,3 4,2 4,2 1,9 3,6 1,9 31312 35 1/2 35 10 5 5 5 2,4 3,7 2,4 31313 35 3/4 35 10 5,3 5 5 2,4 3,8 2,4 31316 42 1/2 42 11,4 5,3 5,7 5,7 2,7 4 2,7 31317 42 3/4 42 11,4 5,6 5,7 5,7 2,7 4,1 2,7 31320 54 1/2 54 13,8 5,9 6,9 6,9 3,4 4,6 3,4 31321 54 3/4 54 13,8 6,2 6,9 6,9 3,4 4,7 3,4 31324 54 2 54 13,8 7,9 6,9 6,9 3,4 5,6 3,4 31326 76,1 3/4 76,1 23 7,9 11,5 11,5 6,2 6,4 6,2 31329 76,1 2 76,1 23 8,9 11,5 11,5 6,2 6,6 6,2 31331 88,9 3/4 88,9 26 8,8 13 13 7 7,3 7 31334 88,9 2 88,9 26 9,6 13 13 7 7,3 7 31336 108 3/4 108 31 10,5 15,5 15,5 8 9 8 31339 108 2 108 31 11,5 15,5 15,5 8 9,2 8 Mapress Catalogue 2008/2009 11

Geberit Mapress Mapress Stainless Steel T-pieces T-piece with male threa R 1 l l1 1 For sanitary an inustrial applications Male threa eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø R [''] 1Ø 31401 new 15 3/8 15 5 6,4 3,2 3,2 1,2 1,2 31454 15 1/2 15 3,4 6,4 3,2 3,2 1,2 1,2 31455 18 1/2 18 3,6 6,8 3,4 3,4 1,4 1,4 31458 22 3/4 22 4,2 7,4 3,7 3,7 1,6 1,6 31459 22 1 22 4,5 7,4 3,7 3,7 1,6 1,6 31461 28 1 28 4,8 8,4 4,2 4,2 1,9 1,9 31464 35 1 1/4 35 5,4 10 5 5 2,4 2,4 l l1 1 12 Mapress Catalogue 2008/2009

Aapters Geberit Mapress Mapress Stainless Steel Aapters Aapters Aapter with male threa For sanitary an inustrial applications Male threa eaky if unpresse R Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø R [''] 31932 15 1/2 5,7 31933 18 1/2 5,7 31936 22 3/4 5,9 31937 28 1 6,6 31938 35 1 1/4 8 31939 42 1 1/2 9,1 31940 54 2 10,2 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Ø R [''] 31726 15 3/8 1,8 3,8 31703 15 1/2 2,1 4,1 31714 15 3/4 2,3 4,3 31704 18 1/2 2,2 4,2 31705 18 3/4 2,4 4,4 31715 22 1/2 2,1 4,2 31707 22 3/4 2,3 4,4 31716 22 1 2,5 4,6 31717 28 3/4 2,3 4,6 31708 28 1 2,3 4,8 31718 28 1 1/4 2,5 4,8 31719 35 1 2,5 5,1 31709 35 1 1/4 2,7 5,3 31720 35 1 1/2 2,7 5,3 31721 42 1 1/4 2,7 5,7 31710 42 1 1/2 2,7 5,7 31722 54 1 1/2 4,8 8,3 31711 54 2 5,4 8,9 31713 76,1 2 1/2 7 12,3 31724 88,9 3 7,7 13,7 Aapter with male threa an plain en For sanitary an inustrial applications Male threa Plain en R Aapter with female threa For sanitary an inustrial applications Female threa eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Ø Rp [''] 31802 15 1/2 3,7 0,4 31823 15 3/4 3,8 0,3 31803 18 1/2 3,7 0,4 31804 18 3/4 3,8 0,3 31805 22 1/2 3,6 0,2 31806 22 3/4 3,9 0,3 31824 22 1 4,2 0,4 31807 28 1/2 3,8 0,2 31819 28 3/4 3,9 0,3 31809 28 1 4,4 0,4 31825 28 1 1/4 4,6 0,4 31820 35 1 4,5 0,2 31811 35 1 1/4 4,9 0,4 31826 35 1 1/2 4,9 0,4 31821 42 1 1/4 5,1 0,2 31814 42 1 1/2 5,3 0,4 31822 54 1 1/2 7,1 2,2 31818 54 2 6,2 0,4 Rp Mapress Catalogue 2008/2009 13

Geberit Mapress Mapress Stainless Steel Aapter with female threa an plain en Elbow aapters Elbow aapter 90 with female threa an plain en K Rp Rp For sanitary an inustrial applications Female threa Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Elbow aapters Ø Rp [''] Elbow aapter 90 with male threa K 90932 15 1/2 13,5 14,8 9 90933 18 1/2 13,5 14,8 9 90934 18 3/4 13,3 14,8 9 90935 22 1/2 13,9 15,2 8,9 90936 22 3/4 13,7 15,2 8,7 Elbow aapters For sanitary an inustrial applications Female threa Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Ø Rp [''] 33203 15 1/2 5,3 3,6 2,3 Elbow aapter 90 with female threa Rp R 1 1 For sanitary an inustrial applications Male threa eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø R [''] 33833 15 1/2 3,7 5,7 3,7 33834 18 1/2 3,9 5,7 3,7 33835 22 3/4 4,6 6 3,9 33836 28 1 5,4 6,7 4,4 33837 35 1 1/4 6,3 7,5 4,9 33838 42 1 1/2 6,7 8,3 5,3 33839 54 2 7,8 9,4 5,9 For sanitary an inustrial applications Female threa eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø Rp 1 1 [''] 33803 15 1/2 5,7 3,7 3,7 2,4 33804 18 1/2 5,7 3,9 3,7 2,6 33805 22 3/4 6 4,6 3,9 3,1 33806 28 1 6,7 5,4 4,3 3,7 33807 35 1 1/4 7,5 6,3 4,9 4,4 14 Mapress Catalogue 2008/2009

Connectors Geberit Mapress Mapress Stainless Steel Connectors Connectors Elbow tap connector with female threa Double tap connector 90 /90 with female threa 1 Rp Rp Female threa eaky if unpresse l 1 l1 l l1 1 For flow-through hot water lines (TWW) or circulation connections (TW) Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø Rp 1 l l1 [''] 33403 15 1/2 5 4,3 1,3 1,5 3 33405 18 1/2 5 4,3 1,3 1,5 3 33407 22 3/4 5,4 5,1 1,7 1,6 3,3 Female threa eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 /90 Seal rings CIIR black Ø Rp [''] 1Ø 1 l l1 33503 15 1/2 15 6 4,3 1,3 1,5 4 Elbow tap connector with female threa, offset Rp l l1 1 For prewall installation or larger wall istance Female threa Offset eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø Rp 1 l l1 [''] 33423 15 1/2 5 6,5 3,5 1,5 3 33425 18 1/2 5 6,5 3,5 1,5 3 33427 22 3/4 5,4 6,5 3,1 1,6 3,3 Mapress Catalogue 2008/2009 15

Geberit Mapress Mapress Stainless Steel Aapter unions Aapter unions Aapter unions Aapter union with male threa For sanitary an inustrial applications Male threa Removable, flat seal Union nut mae of brass eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 R Seal ring CIIR black EPDM flat gasket Ø R [''] 35360 15 1/2 4,4 6,4 35361 15 3/4 4,6 6,6 35362 18 1/2 4,4 6,4 35363 18 3/4 4,6 6,6 35364 22 1/2 4,6 6,7 35365 22 3/4 4,7 6,8 35366 22 1 5,2 7,3 35367 28 1 5,5 7,8 35368 35 1 1/4 5,9 8,5 35369 42 1 1/2 6 9 35370 54 2 6,8 10,3 Seal ring CIIR black EPDM flat gasket Ø R [''] 35330 15 1/2 4,4 6,4 35331 15 3/4 4,6 6,6 35332 18 1/2 4,4 6,4 35333 18 3/4 4,6 6,6 35334 22 1/2 4,6 6,7 35335 22 3/4 4,7 6,8 35336 22 1 5,2 7,3 35337 28 1 5,5 7,8 35338 35 1 1/4 5,9 8,5 35339 42 1 1/2 6 9 35340 54 2 6,8 10,3 Aapter union with male threa For sanitary an inustrial applications Male threa Removable, flat seal Union nut mae of stainless steel eaky if unpresse R Aapter union with male threa an plain en For sanitary an inustrial applications Male threa Removable, flat seal Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 EPDM flat gasket Ø R [''] 35400 15 1/2 8,6 35402 18 1/2 8,6 35405 22 3/4 9,2 35407 28 1 10,1 35408 35 1 1/4 10,9 35409 42 1 1/2 11,5 35410 54 2 12,9 R Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 16 Mapress Catalogue 2008/2009

Aapter unions Aapter union with female threa For sanitary an inustrial applications Female threa Removable, flat seal Union nut mae of brass eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black EPDM flat gasket Ø Rp [''] Aapter union with female threa For sanitary an inustrial applications 35300 15 1/2 5,9 2,6 35301 15 3/4 6,1 2,6 35302 18 1/2 5,9 2,6 35303 18 3/4 6,1 2,6 35304 22 3/4 6,3 2,7 35305 22 1 6,6 2,8 35306 28 1 7,1 3,1 35307 35 1 1/4 7,7 3,2 35308 42 1 1/2 8,2 3,3 35309 54 2 9,5 3,7 Rp Rp Geberit Mapress Mapress Stainless Steel Aapter union with female threa an plain en For sanitary an inustrial applications Female threa Removable, flat seal Plain en Prouct Details Ø EPDM flat gasket Rp [''] 35350 15 1/2 5,9 2,6 35357 15 3/4 6,1 2,6 35351 18 1/2 5,9 2,6 35358 18 3/4 6,1 2,6 35352 22 3/4 6,3 2,7 35359 22 1 6,6 2,8 35353 28 1 7,1 3,1 35354 35 1 1/4 7,7 3,2 35355 42 1 1/2 8,2 3,3 35356 54 2 9,5 3,7 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø Rp [''] 35380 15 1/2 6,8 8,1 35382 18 1/2 6,8 8,1 35384 22 3/4 7,2 8,7 35386 28 1 7,7 9,4 35387 35 1 1/4 8,2 10,1 35388 42 1 1/2 8,8 10,7 35389 54 2 9,8 12,1 Rp Female threa Removable, flat seal Union nut mae of stainless steel eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black EPDM flat gasket Mapress Catalogue 2008/2009 17

Geberit Mapress Mapress Stainless Steel Aapter with union nut For sanitary an inustrial applications Union nut mae of stainless steel Flat seale eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black EPDM flat gasket Aapter with union nut For sanitary an inustrial applications Union nut mae of brass Flat seale eaky if unpresse Prouct Details Ø G [''] 35132 15 3/4 3,7 1,1 35134 22 1 4 1,1 35075 28 1 1/2 4,4 1,3 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 G G 35044 22 1 1/4 4,3 1,3 35045 22 1 1/2 4,4 1,3 35046 28 1 4 1,3 35035 28 1 1/4 4,4 1,3 35047 28 1 1/2 4,8 1,3 35036 35 1 1/2 4,6 1,3 35037 42 1 3/4 5,2 1,3 35038 54 2 3/8 5,8 1,5 Straight unions Straight unions Straight union with pressfittings on both ens For sanitary an inustrial applications Removable, flat seal Union nut mae of brass eaky if unpresse Prouct Details Seal rings CIIR black EPDM flat gasket Straight unions Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø Ø G [''] 35320 15 6,6 2,6 35321 18 6,9 2,9 35322 22 7,2 3 35323 28 7,7 3,1 35324 35 8,2 3 35325 42 9,5 3,5 35326 54 11,3 4,3 Seal ring CIIR black EPDM flat gasket Ø G [''] 35042 15 1/2 5,1 2,5 35032 15 3/4 3,7 1,1 35072 15 1 1/4 4,3 1,3 35033 18 3/4 3,7 1,1 35043 18 1 1/2 4,4 1,4 35034 22 1 4 1,1 18 Mapress Catalogue 2008/2009

Flanges Geberit Mapress Mapress Stainless Steel Flanges Flanges Flange with pressing socket Flange with plain en i i m k D h m k D For sanitary an inustrial applications For sanitary an inustrial applications With pressing socket eaky if unpresse Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Exclue: Set of bolts for flange Exclue: Flange gasket Ø iø D k m PN 33702 15 13 9,5 6,5 1,4 1,1 5,6 3,6 10 / 16 33703 18 16 9,5 6,5 1,4 1,1 5,7 3,7 10 / 16 33704 22 19,6 10,5 7,5 1,4 1,2 5,9 3,8 10 / 16 33705 28 25,6 11,5 8,5 1,4 1,4 6,5 4,2 10 / 16 33706 35 32 14 10 1,8 1,5 6,9 4,3 10 / 16 33707 42 39 15 11 1,8 1,6 7,7 4,7 10 / 16 33708 54 51 16,5 12,5 1,8 1,8 8,7 5,2 10 / 16 33709 76,1 72,1 18,5 14,5 1,8 1,8 12,6 7,3 10 / 16 33710 88,9 84,9 20 16 1,8 2 14,3 8,3 10 / 16 33711 108 104 22 18 1,8 2 16,8 9,3 10 / 16 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Exclue: Set of bolts for flange Exclue: Flange gasket Ø iø D k m h 33729 76,1 72,1 18,5 14,5 1,8 12,6 1,8 10 / 16 33730 88,9 84,9 20 16 1,8 14,3 2 10 / 16 33731 108 104 22 18 1,8 16,8 2 10 / 16 PN Mapress Catalogue 2008/2009 19

Geberit Mapress Mapress Stainless Steel Flanges Flange stub with plain en for loose flange new Flange stub with plain en for loose flange new 2 1 i 2 1 i h h For loose flange Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket Ø 2Ø iø h 36149 22 50 19,6 13,5 0,6 6 36150 28 60 25,6 13,5 0,6 6 36151 35 70 32 13,5 0,6 6 36152 42 80 39 13,5 0,6 6 36153 54 90 51 13,5 0,8 6 36154 76,1 110 73,1 13,5 0,8 6 36155 88,9 128 84,9 13,5 1 6 36156 108 148 104 13,5 1 6 PN For loose flange Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket Ø 2Ø iø h 36141 22 58 19,6 13,5 0,6 10 / 16 36142 28 68 25,6 13,5 0,6 10 / 16 36143 35 78 32 13,5 0,6 10 / 16 36144 42 88 39 13,5 0,6 10 / 16 36145 54 102 51 13,5 0,8 10 / 16 36146 76,1 122 72,1 13,5 0,8 10 / 16 36147 88,9 138 84,9 13,5 1 10 / 16 36148 108 158 104 13,5 1 10 / 16 PN 20 Mapress Catalogue 2008/2009

Fittings / passings / closures Geberit Mapress Mapress Stainless Steel Fittings / passings / closures Expansion fittings Axial expansion fitting with pressing sockets new Bulkhea an eck passings / Closures Bulkhea an eck passings Bulkhea an eck passing with plain ens a l l D eaky if unpresse Seal rings CIIR black Ø D a 33922 15 2,7 0,7 15,1 33923 18 2,7 0,7 14,7 33924 22 3,5 1,1 10,6 33925 28 4,2 1 12 33926 35 4,2 1 13,9 33927 42 5,6 1,1 14,9 33928 54 7,2 1,4 17,6 33929 76,1 9,4 2,2 26,2 33930 88,9 10,5 2,3 28,6 33931 108 13,6 2,3 54,2 To wel into ships bulkheas Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø l 90980 15 45 16,5 90981 18 45 16,5 90982 22 45 16,5 90983 28 45 16,5 90984 35 45 16,5 90985 42 45 16,5 90986 54 45 16,5 90987 76,1 45 16,5 90988 88,9 45 16,5 90989 108 45 16,5 Axial expansion fitting with pressing sockets new Closures Closures Cap a D Seal rings CIIR black Ø D a 33914 22 4 4,8 38,5 33915 28 4,8 5 44,6 33916 35 5,7 5,2 49,4 33917 42 6,4 5,3 50,7 33918 54 8 7,2 55,9 33919 76,1 10,2 8,2 72,6 33920 88,9 11,4 8,5 74,8 33921 108 14,4 10,5 91 For sanitary an inustrial applications For closing pipe ens eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø 33212 15 2,3 0,3 33213 18 2,3 0,3 33214 22 2,4 0,3 33215 28 2,6 0,3 33216 35 2,9 0,3 33217 42 3,3 0,3 33218 54 3,8 0,3 Mapress Catalogue 2008/2009 21

Geberit Mapress Mapress Stainless Steel Closures Plug E For sanitary an inustrial applications For gas installations with natural gases (NG) an liquefie gases (PG) For long-lasting sealing of pressing sockets Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø E 90222 15 3,3 4,2 90223 18 3,3 4 90224 22 3,4 4,3 90225 28 3,6 4,7 90226 35 4 4,9 90227 42 4,4 5,5 90228 54 4,9 6,2 90229 76,1 6,5 7,5 90230 88,9 7,2 9 90231 108 8,7 10,3 22 Mapress Catalogue 2008/2009

Mapress CrNi Steel Description Mapress Pipes Pipes Page 24 Mapress Catalogue 2008/2009 23

Geberit Mapress Mapress CrNi Steel System pipe Mapress System pipe CrNi Steel System pipe Mapress Stainless Steel 1.4301 system pipe (m) i s For heating an inustrial applications Not suitable for rinking water Corrosion-resistant Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 Prouct Details Prouct material Thermal conuctivity pipe Thermal expansion Surface roughness Stainless Cr-Ni steel 1.4301 (DIN EN 10088) 15 W/(m K) 0.016 mm/(m K) 1.5 μm Delivery in sections Small bunle Ø iø s (m) [m] 39602 15 13 1 6 39603 18 16 1 6 39604 22 19,6 1,2 6 39605 28 25,6 1,2 6 39606 35 32 1,5 6 39607 42 39 1,5 6 39608 54 51 1,5 6 39109 76,1 73,1 1,5 6 39110 88,9 85,9 1,5 6 39111 108 104 2 6 24 Mapress Catalogue 2008/2009

Mapress Stainless Steel silicone-free Description Couplings Page 26 Bens Page 26 Reucers Page 28 T-pieces Page 28 Aapters Page 32 Mapress Fittings Elbow aapters Page 33 Connectors Page 33 Aapter unions Page 34 Straight unions Page 36 Flanges Page 36 Expansion fittings Page 37 Closures Page 38 Mapress Catalogue 2008/2009 25

Geberit Mapress Mapress Stainless Steel silicone-free Couplings / Bens Mapress Couplings Stainless / Bens Steel silicone-free Couplings Coupling Bens Bens Ben 90 Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black Ø 82002 15 4,8 0,8 82003 18 4,8 0,8 82004 22 5 0,8 82005 28 5,4 0,8 82006 35 6,2 1 82007 42 7,1 1,1 82008 54 8,3 1,3 82009 76,1 14,1 3,5 82010 88,9 16,2 4,2 82011 108 19,4 4,4 Slip coupling Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø 80102 15 4,9 2,9 80103 18 5,3 3,3 80104 22 6,1 4 80105 28 7,2 4,9 81106 35 6,8 4,2 81107 42 8 5 81108 54 10 6,5 81109 76,1 15,3 10 81110 88,9 17,9 11,9 81111 108 22,2 14,7 E E Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black Ø E 82102 15 2,5 8 82103 18 2,5 8 82104 22 2,5 8,4 82105 28 3 9,1 82106 35 3 10,2 82107 42 4 12 82108 54 4 14 82109 76,1 6 23 82110 88,9 7 26 82111 108 8 31 26 Mapress Catalogue 2008/2009

Bens Ben 90 with plain en Free from substances that constrain from painting eaky if unpresse Plain en Ø Ben 45 with plain en Geberit Mapress Mapress Stainless Steel silicone-free 82606 35 4,3 1,7 82607 42 5,1 2,1 82608 54 6,2 2,7 82609 76,1 9,7 4,4 82610 88,9 11,2 5,2 82611 108 13,9 6,4 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø 80302 15 5,9 4,9 2,9 80303 18 6,1 5,3 3,3 80304 22 7 6,1 4 80305 28 7,9 7,2 4,9 83306 35 7,7 6,8 4,2 83307 42 9 8 5 83308 54 11,1 10 6,5 83309 76,1 16,6 15,3 10 83310 88,9 19,4 17,9 11,9 83311 108 24 22,2 14,7 Ben 45 Free from substances that constrain from painting eaky if unpresse Free from substances that constrain from painting eaky if unpresse Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 45 Seal ring CIIR black Ø 80702 15 4,5 3,6 1,6 80703 18 4,2 3,7 1,7 80704 22 5,2 4,2 2,1 80705 28 5,6 4,8 2,5 82706 35 5,3 4,3 1,7 82707 42 6,1 5,1 2,1 82708 54 7,3 6,2 2,7 82709 76,1 11,1 9,7 4,4 82710 88,9 13 11,2 5,2 82711 108 15,7 13,9 6,4 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 45 Seal rings CIIR black Ø 80602 15 3,6 1,6 80603 18 3,7 1,7 80604 22 4,2 2,1 80605 28 4,8 2,5 Mapress Catalogue 2008/2009 27

Geberit Mapress Mapress Stainless Steel silicone-free Reucers / T-pieces Reucers / T-pieces Reucers Reucer with plain en T-pieces T-pieces T-piece equal 1 1 1 l l Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Ø 1Ø 82303 18 15 3,5 5,5 82305 22 15 3,9 5,9 82306 22 18 3,7 5,7 82307 28 15 4,6 6,6 82308 28 18 4,4 6,4 82309 28 22 3,9 6 82310 35 15 5,5 7,5 82311 35 18 5,4 7,4 82312 35 22 5 7,1 82313 35 28 4,5 6,8 82314 42 15 6,1 8,1 82315 42 18 6 8 82316 42 22 6,1 8,2 82317 42 28 6 8,3 82318 42 35 5,1 7,7 82319 54 15 7,7 9,7 82320 54 18 7,6 9,6 82321 54 22 7,4 9,5 82322 54 28 8,7 11 82323 54 35 8 10,6 82324 54 42 6,2 9,2 82331 76,1 54 11,1 14,6 82338 88,9 54 12,8 16,3 82339 88,9 76,1 10,8 16,1 82345 108 54 13,7 17,2 82346 108 76,1 13,1 18,4 82348 108 88,9 14,3 20,3 Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø 1 l 1 81002 15 6,4 3,9 3,2 1,2 1,9 81003 18 6,4 3,9 3,4 1,2 2,1 81004 22 6,8 4,1 3,7 1,4 2,3 81005 28 7,4 4,4 4,2 1,6 2,7 81006 35 8,4 5 5 1,9 3,1 81007 42 10 5,7 5,7 2,4 3,5 81008 54 11,4 6,5 6,9 2,7 4,2 81009 76,1 13,8 7,7 11,5 3,4 5,7 81010 88,9 23 11 13 6,2 6,8 81011 108 26 12,8 15,5 7 7,8 28 Mapress Catalogue 2008/2009

T-pieces Geberit Mapress Mapress Stainless Steel silicone-free T-piece reuce 1 1 1 2 l l2 2 Free from substances that constrain from painting eaky if unpresse Outlet reuce Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø 1Ø 2Ø 1 l l2 1 2 81204 18 15 18 6,8 4,1 3,4 3,4 1,4 2,1 1,4 81206 22 15 22 7,4 4,3 3,7 3,7 1,6 2,3 1,6 81207 22 18 22 7,4 4,3 3,7 3,7 1,6 2,3 1,6 81209 28 15 28 8,4 4,6 4,2 4,2 1,9 2,6 1,9 81210 28 18 28 8,4 4,6 4,2 4,2 1,9 2,6 1,9 81211 28 22 28 8,4 4,7 4,2 4,2 1,9 2,6 1,9 81212 35 15 35 10 4,9 5 5 2,4 2,9 2,4 81213 35 18 35 10 4,9 5 5 2,4 2,9 2,4 81214 35 22 35 10 5 5 5 2,4 2,9 2,4 81215 35 28 35 10 5,3 5 5 2,4 3 2,4 81216 42 15 42 11,4 5,3 5,7 5,7 2,7 3,3 2,7 81217 42 18 42 11,4 5,3 5,7 5,7 2,7 3,3 2,7 81218 42 22 42 11,4 5,4 5,7 5,7 2,7 3,3 2,7 81219 42 28 42 11,4 5,7 5,7 5,7 2,7 3,4 2,7 81220 42 35 42 11,4 6,1 5,7 5,7 2,7 3,5 2,7 81221 54 15 54 13,8 5,9 6,9 6,9 3,4 3,9 3,4 81222 54 18 54 13,8 5,9 6,9 6,9 3,4 3,9 3,4 81223 54 22 54 13,8 6 6,9 6,9 3,4 3,9 3,4 81224 54 28 54 13,8 6,3 6,9 6,9 3,4 4 3,4 81225 54 35 54 13,8 6,7 6,9 6,9 3,4 4,1 3,4 81226 54 42 54 13,8 7,1 6,9 6,9 3,4 4,1 3,4 81229 76,1 22 76,1 23 7,7 11,5 11,5 6,2 5,6 6,2 81230 76,1 28 76,1 23 7,9 11,5 11,5 6,2 5,6 6,2 81231 76,1 35 76,1 23 8,1 11,5 11,5 6,2 5,5 6,2 81232 76,1 42 76,1 23 8,1 11,5 11,5 6,2 5,1 6,2 81233 76,1 54 76,1 23 8,7 11,5 11,5 6,2 5,2 6,2 81236 88,9 22 88,9 26 8,5 13 13 7 6,4 7 81237 88,9 28 88,9 26 8,7 13 13 7 6,4 7 81238 88,9 35 88,9 26 9 13 13 7 6,4 7 81239 88,9 42 88,9 26 9,2 13 13 7 6,2 7 81240 88,9 54 88,9 26 9,3 13 13 7 5,8 7 81241 88,9 76,1 88,9 26 11,4 13 13 7 6,1 7 81244 108 22 108 31 10,3 15,5 15,5 8 8,2 8 81245 108 28 108 31 10,5 15,5 15,5 8 8,2 8 Continuation on the next page Mapress Catalogue 2008/2009 29

Geberit Mapress Mapress Stainless Steel silicone-free T-pieces Ø 1Ø 2Ø 81246 108 35 108 31 10,8 15,5 15,5 8 8,2 8 81247 108 42 108 31 11 15,5 15,5 8 8 8 81248 108 54 108 31 11,3 15,5 15,5 8 7,8 8 81249 108 76,1 108 31 12,4 15,5 15,5 8 7,1 8 81250 108 88,9 108 31 13,5 15,5 15,5 8 7,5 8 1 l l2 1 2 T-piece with female threa Rp 1 1 1 l l2 2 Free from substances that constrain from painting eaky if unpresse Female threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø Rp 1Ø 1 l l2 1 2 [''] 81304 15 1/2 15 6,4 4 3,2 3,2 1,2 2,7 1,2 81305 18 1/2 18 6,8 4,2 3,4 3,4 1,4 2,9 1,4 81306 18 3/4 18 6,8 4,4 3,4 3,4 1,4 2,9 1,4 81307 22 1/2 22 7,4 4,3 3,7 3,7 1,6 3 1,6 81308 22 3/4 22 7,4 4,6 3,7 3,7 1,6 3,1 1,6 81309 28 1/2 28 8,4 4,6 4,2 4,2 1,9 3,3 1,9 81310 28 3/4 28 8,4 4,9 4,2 4,2 1,9 3,4 1,9 81311 28 1 28 8,4 5,3 4,2 4,2 1,9 3,6 1,9 81312 35 1/2 35 10 5 5 5 2,4 3,7 2,4 81313 35 3/4 35 10 5,3 5 5 2,4 3,8 2,4 81316 42 1/2 42 11,4 5,3 5,7 5,7 2,7 4 2,7 81317 42 3/4 42 11,4 5,6 5,7 5,7 2,7 4,1 2,7 81320 54 1/2 54 13,8 5,9 6,9 6,9 3,4 4,6 3,4 81321 54 3/4 54 13,8 6,2 6,9 6,9 3,4 4,7 3,4 81324 54 2 54 13,8 7,9 6,9 6,9 3,4 5,6 3,4 81326 76,1 3/4 76,1 23 7,9 11,5 11,5 6,2 6,4 6,2 81329 76,1 2 76,1 23 8,9 11,5 11,5 6,2 6,6 6,2 81331 88,9 3/4 88,9 26 8,8 13 13 7 7,3 7 81334 88,9 2 88,9 26 9,6 13 13 7 7,3 7 81336 108 3/4 108 31 10,5 15,5 15,5 8 9 8 81339 108 2 108 31 11,5 15,5 15,5 8 9,2 8 30 Mapress Catalogue 2008/2009

T-pieces Geberit Mapress Mapress Stainless Steel silicone-free T-piece with male threa R 1 l l1 1 Free from substances that constrain from painting eaky if unpresse Male threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal rings CIIR black Ø R 1Ø l l1 1 [''] 81454 15 1/2 15 3,4 6,4 3,2 3,2 1,2 1,2 81455 18 1/2 18 3,6 6,8 3,4 3,4 1,4 1,4 81458 22 3/4 22 4,2 7,4 3,7 3,7 1,6 1,6 81459 22 1 22 4,5 7,4 3,7 3,7 1,6 1,6 81461 28 1 28 4,8 8,4 4,2 4,2 1,9 1,9 81464 35 1 1/4 35 5,4 10 5 5 2,4 2,4 Mapress Catalogue 2008/2009 31

Geberit Mapress Mapress Stainless Steel silicone-free Aapters Aapters Aapters Aapter with male threa Aapter with female threa R Rp Free from substances that constrain from painting eaky if unpresse Male threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Ø R [''] 81726 15 3/8 1,8 3,8 81703 15 1/2 2,1 4,1 81714 15 3/4 2,3 4,3 81704 18 1/2 2,2 4,2 81705 18 3/4 2,4 4,4 81715 22 1/2 2,1 4,2 81707 22 3/4 2,3 4,4 81716 22 1 2,5 4,6 81717 28 3/4 2,3 4,6 81708 28 1 2,3 4,8 81718 28 1 1/4 2,5 4,8 81719 35 1 2,5 5,1 81709 35 1 1/4 2,7 5,3 81720 35 1 1/2 2,7 5,3 81721 42 1 1/4 2,7 5,7 81710 42 1 1/2 2,7 5,7 81722 54 1 1/2 4,8 8,3 81711 54 2 5,4 8,9 81713 76,1 2 1/2 7 12,3 81724 88,9 3 7,7 13,7 Free from substances that constrain from painting eaky if unpresse Female threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Ø Rp [''] 81802 15 1/2 3,7 0,4 81803 18 1/2 3,7 0,4 81823 15 3/4 3,8 0,3 81804 18 3/4 3,8 0,3 81805 22 1/2 3,6 0,2 81806 22 3/4 3,9 0,3 81824 22 1 4,2 0,4 81807 28 1/2 3,8 0,2 81819 28 3/4 3,9 0,3 81809 28 1 4,4 0,4 81825 28 1 1/4 4,6 0,4 81820 35 1 4,5 0,2 81811 35 1 1/4 4,9 0,4 81826 35 1 1/2 4,9 0,4 81821 42 1 1/4 5,1 0,2 81814 42 1 1/2 5,3 0,4 81822 54 1 1/2 7,1 2,2 81818 54 2 6,2 0,4 32 Mapress Catalogue 2008/2009

Elbow aapters / Connectors Geberit Mapress Mapress Stainless Steel silicone-free Elbow aapters / Connectors Elbow aapters Elbow aapter 90 with male threa Anschlüsse Connectors Elbow tap connector with female threa Free from substances that constrain from painting eaky if unpresse Male threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø R [''] 83833 15 1/2 3,7 5,7 3,7 83834 18 1/2 3,9 5,7 3,7 83835 22 3/4 4,6 6 3,9 83836 28 1 5,4 6,7 4,4 83837 35 1 1/4 6,3 7,5 4,9 83838 42 1 1/2 6,7 8,3 5,3 83839 54 2 7,8 9,4 5,9 R Free from substances that constrain from painting eaky if unpresse Female threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black l Ø Rp 1 l l1 [''] 83403 15 1/2 5 4,3 1,3 1,5 3 83405 18 1/2 5 4,3 1,3 1,5 3 83407 22 3/4 5,4 5,1 1,7 1,6 3,3 Elbow tap connector with female threa, offset 1 l1 Rp Elbow aapter 90 with female threa 1 1 Free from substances that constrain from painting eaky if unpresse Female threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black Ø Rp 1 1 [''] 83803 15 1/2 5,3 3,7 3,7 2,4 83804 18 1/2 5,7 3,9 3,7 2,6 83805 22 3/4 6 4,6 3,9 3,1 83806 28 1 6,7 5,4 4,3 3,7 83807 35 1 1/4 7,5 6,3 4,9 4,4 Rp For prewall installation or larger wall istance Free from substances that constrain from painting eaky if unpresse Female threa Offset Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 Seal ring CIIR black l 1 Ø Rp 1 l l1 [''] 83423 15 1/2 5 6,5 3,5 1,5 3 83425 18 1/2 5 6,5 3,5 1,5 3 83427 22 3/4 5,4 6,5 3,1 1,6 3,3 l1 Rp Mapress Catalogue 2008/2009 33

Geberit Mapress Mapress Stainless Steel silicone-free Double tap connector 90 /90 with female threa l 1 1 For flow-through hot water lines (TWW) or circulation connections (TW) l1 Rp Ø Rp [''] Aapter union with male threa Aapter unions 85305 22 1 6,6 2,8 85306 28 1 7,1 3,1 85307 35 1 1/4 7,7 3,2 85308 42 1 1/2 8,2 3,3 85309 54 2 9,5 3,7 Free from substances that constrain from painting eaky if unpresse Female threa R Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Angle 90 /90 Seal rings CIIR black Ø Rp [''] Aapter unions 1Ø Aapter union with female threa 1 Free from substances that constrain from painting eaky if unpresse Female threa Removable, flat seal Union nut mae of brass l l1 83503 15 1/2 15 6 4,3 1,3 1,5 4 Aapter unions Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Rp Free from substances that constrain from painting eaky if unpresse Male threa Removable, flat seal Union nut mae of brass Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black EPDM flat gasket Ø R [''] 85330 15 1/2 4,4 6,4 85331 15 3/4 4,6 6,6 85332 18 1/2 4,4 6,4 85333 18 3/4 4,6 6,6 85334 22 1/2 4,6 6,7 85335 22 3/4 4,7 6,8 85336 22 1 5,2 7,3 85337 28 1 5,5 7,8 85338 35 1 1/4 5,9 8,5 85339 42 1 1/2 6 9 85340 54 2 6,8 10,3 Seal ring CIIR black EPDM flat gasket Ø Rp [''] 85300 15 1/2 5,9 2,6 85301 15 3/4 6,1 2,6 85302 18 1/2 5,9 2,6 85303 18 3/4 6,1 2,6 85304 22 3/4 6,3 2,7 34 Mapress Catalogue 2008/2009

Aapter unions Aapter union with male threa Free from substances that constrain from painting eaky if unpresse Male threa Removable, flat seal Union nut mae of stainless steel Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black EPDM flat gasket Aapter union with female threa Free from substances that constrain from painting eaky if unpresse Female threa Removable, flat seal Union nut mae of stainless steel Prouct Details Ø R [''] 85360 15 1/2 4,4 6,4 85361 15 3/4 4,6 6,6 85362 18 1/2 4,4 6,4 85363 18 3/4 4,6 6,6 85364 22 1/2 4,6 6,7 85365 22 3/4 4,7 6,8 85366 22 1 5,2 7,3 85367 28 1 5,5 7,8 85368 35 1 1/4 5,9 8,5 85369 42 1 1/2 6 9 85370 54 2 6,8 10,3 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 R Rp Aapter with union nut Geberit Mapress Mapress Stainless Steel silicone-free Free from substances that constrain from painting eaky if unpresse Union nut mae of brass Flat seale Prouct Details Ø Seal ring CIIR black EPDM flat gasket Rp [''] 85350 15 1/2 5,9 2,6 85357 15 3/4 6,1 2,6 85351 18 1/2 5,9 2,6 85358 18 3/4 6,1 2,6 85352 22 3/4 6,3 2,7 85359 22 1 6,6 2,8 85353 28 1 7,1 3,1 85354 35 1 1/4 7,7 3,2 85355 42 1 1/2 8,2 3,3 85356 54 2 9,5 3,7 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø G [''] 85042 15 1/2 5,1 2,5 85032 15 3/4 3,7 1,1 85072 15 1 1/4 4,3 1,3 85033 18 3/4 3,7 1,1 85043 18 1 1/2 4,4 1,4 85034 22 1 4 1,1 85044 22 1 1/4 4,3 1,3 85045 22 1 1/2 4,4 1,3 85046 28 1 5,5 2,4 85035 28 1 1/4 4,4 1,3 85047 28 1 1/2 4,8 1,3 85036 35 1 1/2 4,6 1,3 85037 42 1 3/4 5,2 1,3 85038 54 2 3/8 5,8 1,5 G Seal ring CIIR black EPDM flat gasket Mapress Catalogue 2008/2009 35

Geberit Mapress Mapress Stainless Steel silicone-free Straight unions / Flanges Aapter with union nut G Flansche Flanges Flange with pressing socket i Free from substances that constrain from painting eaky if unpresse Flat seale Union nut mae of stainless steel Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black EPDM flat gasket Straight unions / Flanges Ø G [''] 85132 15 3/4 3,7 1,1 85134 22 1 4 1,1 85075 28 1 1/2 4,8 1,3 Straight unions Straight union with pressfittings on both ens Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal ring CIIR black Exclue: Set of bolts for flange Exclue: Flange gasket Ø iø D k m PN 83702 15 13 9,5 6,5 1,4 1,1 5,6 3,6 10 / 16 83703 18 16 9,5 6,5 1,4 1,1 5,7 3,7 10 / 16 83704 22 19,6 10,5 7,5 1,4 1,2 5,9 3,8 10 / 16 83705 28 25,6 11,5 8,5 1,4 1,4 6,5 4,2 10 / 16 83706 35 32 14 10 1,8 1,5 6,9 4,3 10 / 16 83707 42 39 15 11 1,8 1,6 7,7 4,7 10 / 16 83708 54 51 16,5 12,5 1,8 1,8 8,7 5,2 10 / 16 83709 76,1 72,1 18,5 14,5 1,8 1,8 12,6 7,3 10 / 16 83710 88,9 84,9 20 16 1,8 2 14,3 8,3 10 / 16 83711 108 104 22 18 1,8 2 16,8 9,3 10 / 16 m k D Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black EPDM flat gasket Ø 85320 15 6,6 2,6 85321 18 6,9 2,9 85322 22 7,2 3 85323 28 7,7 3,1 85324 35 8,2 3 85325 42 9,5 3,5 85326 54 11,3 4,3 36 Mapress Catalogue 2008/2009

Expansion fittings Flange stub with plain en for loose flange 2 1 i h For loose flange new Ø Geberit Mapress Mapress Stainless Steel silicone-free 2Ø iø h 36141 22 58 19,6 13,5 0,6 10 / 16 36142 28 68 25,6 13,5 0,6 10 / 16 36143 35 78 32 13,5 0,6 10 / 16 36144 42 88 39 13,5 0,6 10 / 16 36145 54 102 51 13,5 0,8 10 / 16 36146 76,1 122 72,1 13,5 0,8 10 / 16 36147 88,9 138 84,9 13,5 1 10 / 16 36148 108 158 104 13,5 1 10 / 16 PN Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket Ø 2Ø iø h 36149 22 50 19,6 13,5 0,6 6 36150 28 60 25,6 13,5 0,6 6 36151 35 70 32 13,5 0,6 6 36152 42 80 39 13,5 0,6 6 36153 54 90 51 13,5 0,8 6 36154 76,1 110 73,1 13,5 0,8 6 36155 88,9 128 84,9 13,5 1 6 36156 108 148 104 13,5 1 6 Flange stub with plain en for loose flange 2 1 i PN new Expansion fittings Expansion fittings Axial expansion fitting with pressing sockets eaky if unpresse Seal rings CIIR black Ø D a 33922 15 2,7 0,7 15,1 33923 18 2,7 0,7 14,7 33924 22 3,5 1,1 10,6 33925 28 4,2 1 12 33926 35 4,2 1 13,9 33927 42 5,6 1,1 14,9 33928 54 7,2 1,4 17,6 33929 76,1 9,4 2,2 26,2 33930 88,9 10,5 2,3 28,6 33931 108 13,6 2,3 54,2 a new D h For loose flange Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket Mapress Catalogue 2008/2009 37

Geberit Mapress Mapress Stainless Steel silicone-free Closures Closures Closures Cap For closing pipe ens Free from substances that constrain from painting eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Ø 83212 15 2,3 0,3 83213 18 2,3 0,3 83214 22 2,4 0,3 83215 28 2,6 0,3 83216 35 2,9 0,3 83217 42 3,3 0,3 83218 54 3,8 0,3 38 Mapress Catalogue 2008/2009

Mapress Stainless Steel Gas Description Couplings Page 40 Bens Page 40 Reucers Page 42 Mapress Fittings T-pieces Page 42 Aapters Page 45 Connectors Page 46 Flanges Page 48 Closures Page 49 Mapress Accessories Accessories Page 49 Mapress Catalogue 2008/2009 39

Geberit Mapress Mapress Stainless Steel Gas Couplings / Bens Mapress Couplings Stainless / Bens Steel Gas Couplings Coupling For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Bens Ben 90 Ø E 34108 15 2,5 8 34109 18 2,5 8 34110 22 2,5 8,4 34111 28 3 9,1 34112 35 3 10,2 34113 42 4 12 34114 54 4 14 34122 108 8 31 Bens Seal rings NBR yellow Slip coupling Ø For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse 34101 15 4,8 0,8 34102 18 4,8 0,8 34103 22 5 0,8 34104 28 5,4 0,8 34105 35 6,2 1 34106 42 7,1 1,1 34107 54 8,3 1,3 34248 76,1 14,1 3,5 34249 88,9 16,2 4,2 34250 108 19,4 4,4 E E For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal rings NBR yellow Ø 34000 15 4,9 2,9 34001 18 5,3 3,3 34002 22 6,1 4 34003 28 7,2 4,9 34187 35 6,8 4,2 34188 42 8 5 34189 54 10 6,5 34441 76,1 15,3 10 34442 88,9 17,9 11,9 34443 108 22,2 14,7 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Seal rings NBR yellow 40 Mapress Catalogue 2008/2009

Bens Geberit Mapress Mapress Stainless Steel Gas Ben 90 with plain en For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal rings NBR yellow Ø Ben 45 with plain en 34014 15 3,6 1,6 34015 18 3,7 1,7 34016 22 4,2 2,1 34017 28 4,8 2,5 34193 35 4,3 1,7 34194 42 5,1 2,1 34195 54 6,2 2,7 34447 76,1 9,7 4,4 34448 88,9 11,2 5,2 34449 108 13,9 6,4 Seal ring NBR yellow Ø 34007 15 5,9 4,9 2,9 34008 18 6,1 5,3 3,3 34009 22 7 6,1 4 34010 28 7,9 7,2 4,9 34190 35 7,7 6,8 4,2 34191 42 9 8 5 34192 54 11,1 10 6,5 34444 76,1 16,6 15,3 10 34445 88,9 19,4 17,9 11,9 34446 108 24 22,2 14,7 Ben 45 For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 45 For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 45 Seal ring NBR yellow Ø 34021 15 4,5 3,6 1,6 34022 18 4,2 3,7 1,7 34023 22 5,2 4,2 2,1 34024 28 5,6 4,8 2,5 34196 35 5,3 4,3 1,7 34197 42 6,1 5,1 2,1 34198 54 7,3 6,2 2,7 34450 76,1 11,1 9,7 4,4 34451 88,9 13 11,2 5,2 34452 108 15,7 13,9 6,4 Mapress Catalogue 2008/2009 41

Geberit Mapress Mapress Stainless Steel Gas Reucers / T-pieces Reucers / T-pieces Reucers Reucer with plain en T-pieces T-pieces T-piece equal For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Seal ring NBR yellow Ø 1Ø 34115 18 15 3,5 5,5 34116 22 15 3,9 5,9 34117 22 18 3,7 5,7 34118 28 15 4,6 6,6 34119 28 18 4,4 6,4 34120 28 22 3,9 6 34123 35 22 5 7,1 34124 35 28 4,5 6,8 34128 42 28 6 8,3 34129 42 35 5,1 7,7 34133 54 28 8,7 11 34134 54 35 8 10,6 34135 54 42 6,2 9,2 34296 76,1 54 11,1 14,6 34297 88,9 54 12,8 16,3 34298 88,9 76,1 10,8 16,1 34259 108 54 13,7 17,2 34260 108 76,1 13,1 18,4 34261 108 88,9 14,3 20,3 1 l l For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Prouct Details 1 1 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal rings NBR yellow Ø 1 l 1 34028 15 6,4 3,9 3,2 1,2 1,9 34029 18 6,8 4,1 3,4 1,4 2,1 34030 22 7,4 4,4 3,7 1,6 2,3 34031 28 8,4 5 4,2 1,9 2,7 34032 35 10 5,7 5 2,4 3,1 34033 42 11,4 6,5 5,7 2,7 3,5 34034 54 13,8 7,7 6,9 3,4 4,2 34285 76,1 23 11 11,5 6,2 5,7 34286 88,9 26 12,8 13 7 6,8 34287 108 31 15,3 15,5 8 7,8 42 Mapress Catalogue 2008/2009

T-pieces Geberit Mapress Mapress Stainless Steel Gas T-piece reuce 1 1 1 2 l l2 2 For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal rings NBR yellow Ø 1Ø 2Ø 34035 18 15 18 6,8 4,1 3,4 3,4 1,4 2,1 1,4 34036 22 15 22 7,4 4,3 3,7 3,7 1,6 2,3 1,6 34037 22 18 22 7,4 4,3 3,7 3,7 1,6 2,3 1,6 34038 28 15 28 8,4 4,6 4,2 4,2 1,9 2,6 1,9 34039 28 18 28 8,4 4,6 4,2 4,2 1,9 2,6 1,9 34040 28 22 28 8,4 4,7 4,2 4,2 1,9 2,6 1,9 34041 35 15 35 10 4,9 5 5 2,4 2,9 2,4 34042 35 18 35 10 4,9 5 5 2,4 2,9 2,4 34043 35 22 35 10 5 5 5 2,4 2,9 2,4 34044 35 28 35 10 5,3 5 5 2,4 3 2,4 34045 42 22 42 11,4 5,4 5,7 5,7 2,7 3,3 2,7 34046 42 28 42 11,4 5,7 5,7 5,7 2,7 3,4 2,7 34047 42 35 42 11,4 6,1 5,7 5,7 2,7 3,5 2,7 34048 54 22 54 13,8 6 6,9 6,9 3,4 3,9 3,4 34049 54 28 54 13,8 6,3 6,9 6,9 3,4 4 3,4 34050 54 35 54 13,8 6,7 6,9 6,9 3,4 4,1 3,4 34051 54 42 54 13,8 7,1 6,9 6,9 3,4 4,1 3,4 34097 new 76,1 54 76,1 23 8,7 11,5 11,5 6,2 5,2 6,2 34098 new 88,9 54 88,9 26 9,3 13 13 7 5,8 7 34099 new 108 54 108 31 11,3 15,5 15,5 8 7,8 8 1 l l2 1 2 Mapress Catalogue 2008/2009 43

Geberit Mapress Mapress Stainless Steel Gas T-pieces T-piece with female threa Rp 1 1 1 l l2 2 For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Female threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal rings NBR yellow Ø Rp 1Ø 1 l l2 1 2 [''] 34052 15 1/2 15 6,4 4 3,2 3,2 1,2 2,7 1,2 34053 18 1/2 18 6,8 4,2 3,4 3,4 1,4 2,9 1,4 34054 18 3/4 18 6,8 4,4 3,4 3,4 1,4 2,9 1,4 34055 22 1/2 22 7,4 4,3 3,7 3,7 1,6 3 1,6 34056 22 3/4 22 7,4 4,6 3,7 3,7 1,6 3,1 1,6 34057 28 1/2 28 8,4 4,6 4,2 4,2 1,9 3,3 1,9 34058 28 3/4 28 8,4 4,9 4,2 4,2 1,9 3,4 1,9 34059 35 1/2 35 10 5 5 5 2,4 3,7 2,4 34060 35 3/4 35 10 5,3 5 5 2,4 3,8 2,4 34061 42 1/2 42 11,4 5,3 5,7 5,7 2,7 4 2,7 34063 54 1/2 54 13,8 5,9 6,9 6,9 3,4 4,6 3,4 34264 54 3/4 54 13,8 6,2 6,9 6,9 3,4 4,7 3,4 34265 54 2 54 13,8 7,9 6,9 6,9 3,4 5,6 3,4 34266 76,1 3/4 76,1 23 7,9 11,5 11,5 6,2 6,4 6,2 34267 76,1 2 76,1 23 8,9 11,5 11,5 6,2 6,6 6,2 34268 88,9 3/4 88,9 26 8,8 13 13 7 7,3 7 34269 88,9 2 88,9 26 9,6 13 13 7 7,3 7 34270 108 3/4 108 31 10,5 15,5 15,5 8 9 8 44 Mapress Catalogue 2008/2009

Aapters Geberit Mapress Mapress Stainless Steel Gas Aapters Aapters Aapter with male threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Male threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Seal ring NBR yellow Aapter with female threa For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Female threa Ø R [''] 34066 15 1/2 2,1 4,1 34067 18 1/2 2,2 4,2 34069 22 1/2 2,1 4,2 34070 22 3/4 2,3 4,4 34346 22 1 2,5 4,6 34068 new 28 3/4 2,3 4,6 34071 28 1 2,3 4,8 34075 35 1 2,5 5,1 34072 35 1 1/4 2,7 5,3 34076 35 1 1/2 2,7 5,3 34073 42 1 1/2 2,7 5,7 34074 54 2 5,4 8,9 34077 76,1 2 1/2 7 12,3 34078 88,9 3 7,7 13,7 R Rp Seal ring NBR yellow Elbow aapter 90 with male threa For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Male threa Prouct Details Ø Seal ring NBR yellow Rp [''] 34083 15 1/2 3,7 0,4 34084 18 1/2 3,7 0,4 34086 22 1/2 3,6 0,2 34087 22 3/4 3,9 0,3 34347 22 1 4,2 0,4 34089 28 1 4,4 0,4 34093 35 1 4,5 0,2 34090 35 1 1/4 4,9 0,4 34091 42 1 1/2 5,3 0,4 34092 54 2 6,2 0,4 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Ø R [''] 34149 15 1/2 3,7 5,7 3,7 34150 18 1/2 3,9 5,7 3,7 34151 22 3/4 4,6 6 3,9 34152 28 1 5,4 6,7 4,4 34153 35 1 1/4 6,3 7,5 4,9 R Mapress Catalogue 2008/2009 45

Geberit Mapress Mapress Stainless Steel Gas Elbow aapter 90 with female threa For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Female threa Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal ring NBR yellow Ø Rp 1 1 [''] 34144 15 1/2 5,7 3,7 3,7 2,4 34145 18 1/2 5,7 3,9 3,7 2,6 34146 22 3/4 6 4,6 3,9 3,1 34147 28 1 6,7 5,4 4,3 3,7 34148 35 1 1/4 7,5 6,3 4,9 4,4 Aapter union with male threa For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Male threa Union nut mae of brass Flat seale Prouct Details 1 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C 1 R Rp Aapter union with female threa Aapters For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Female threa Union nut mae of brass Flat seale Prouct Details Ø Seal ring NBR yellow NBR flat gasket yellow R [''] 34430 15 1/2 4,4 6,4 34431 15 3/4 4,6 6,6 34432 18 1/2 4,4 6,4 34433 18 3/4 4,6 6,6 34434 22 1/2 4,6 6,7 34435 22 3/4 4,7 6,8 34436 22 1 5,2 7,3 34437 28 1 5,5 7,8 34438 35 1 1/4 5,9 8,5 34439 42 1 1/2 6 9 34440 54 2 6,8 10,3 Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Ø Rp [''] 34400 15 1/2 5,9 2,6 34401 15 3/4 6,1 2,6 34402 18 1/2 5,9 2,6 34403 18 3/4 6,1 2,6 34404 22 3/4 6,3 2,7 34405 22 1 6,6 2,8 34406 28 1 7,1 3,1 34407 35 1 1/4 7,7 3,2 34408 42 1 1/2 8,2 3,3 34409 54 2 9,5 3,7 Rp Seal ring NBR yellow NBR flat gasket yellow 46 Mapress Catalogue 2008/2009

Connectors Aapter with union nut Aapter for olive type connection Geberit Mapress Mapress Stainless Steel Gas G For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Union nut mae of brass Conical seal Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Seal ring NBR yellow O-ring NBR yellow Ø G [''] 34156 15 7/8 3,3 0,9 34158 22 1 1/8 4,2 1,6 34161 new 22 1 3/8 4 1,9 34159 28 1 3/8 4,5 1,7 For gas installations with natural gases (NG) an liquefie gases (PG) For liquefie gas installations Marke in yellow eaky if unpresse Can be use in installations with Mapress Copper Gas Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Connectors Ø Elbow tap connector with female threa l 34355 15 6 8 5,1 34356 18 6 8 3,4 Connectors l Aapter with union nut an plain en G new Rp l l1 1 For gas installations with natural gases (NG) an liquefie gases (PG) For gas installations with natural gases (NG) an liquefie gases (PG) eaky if unpresse Marke in yellow Plain en Union nut mae of stainless steel With holes for sealing Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C O-ring NBR yellow Ø G [''] 34214 28 1 3/8 12,8 2,4 Marke in yellow eaky if unpresse Female threa Can be use in installations with Mapress Copper Gas Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal ring NBR yellow Ø Rp 1 l l1 [''] 34136 15 1/2 5 4,3 1,3 1,5 3 34137 18 1/2 5 4,3 1,3 1,5 3 34138 22 3/4 5,4 5,1 1,7 1,6 3,3 Mapress Catalogue 2008/2009 47

Geberit Mapress Mapress Stainless Steel Gas Elbow tap connector for gas metre mounting plate l 1 For gas installations with natural gases (NG) an liquefie gases (PG) For connection single-pipe or two-pipe gas metre For mounting plate gas metre connection l1 Rp Flanges Ø iø D k m PN 34179 22 19,6 10,5 7,5 1,4 1,2 5,9 3,5 10 / 16 34180 28 25,6 11,5 8,5 1,4 1,4 6,5 3,2 10 / 16 34181 35 32 14 10 1,8 1,5 6,9 3,2 10 / 16 34182 42 39 15 11 1,8 1,6 7,7 3,3 10 / 16 34183 54 51 16,5 12,5 1,8 1,8 8,7 3,4 10 / 16 34184 76,1 72,1 18,5 14,5 1,8 1,8 12,6 3,5 10 / 16 34185 88,9 84,9 20 16 1,8 2 14,3 4,6 10 / 16 34186 108 104 22 18 1,8 2 16,8 4,3 10 / 16 Marke in yellow eaky if unpresse Flange stub with plain en for loose flange new Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Angle 90 Seal ring NBR yellow Flanges Ø Rp [''] Flange with pressing socket 1 l For gas installations with natural gases (NG) an liquefie gases (PG) Marke in yellow eaky if unpresse Can be use in installations with Mapress Copper Gas l1 91097 new 22 3/4 3,5 5,1 1,7 1,6 1,4 91099 22 1 6,5 5,8 3 2,2 3,7 91098 new 28 3/4 4,4 6,5 3 1,6 2,1 91100 28 1 6,5 6,1 3 2,2 4 Flanges i m k D For loose flange Plain en Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket Ø 2 1 i h 2Ø iø h 36141 22 58 19,6 13,5 0,6 10 / 16 36142 28 68 25,6 13,5 0,6 10 / 16 36143 35 78 32 13,5 0,6 10 / 16 36144 42 88 39 13,5 0,6 10 / 16 36145 54 102 51 13,5 0,8 10 / 16 36146 76,1 122 72,1 13,5 0,8 10 / 16 36147 88,9 138 84,9 13,5 1 10 / 16 36148 108 158 104 13,5 1 10 / 16 PN Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Seal ring NBR yellow Exclue: Set of bolts for flange Exclue: Flange gasket 48 Mapress Catalogue 2008/2009

Closures / Accessories Geberit Mapress Mapress Stainless Steel Gas Closures / Accessories Closures Cap Mounting plate for gas metre 90 13 50 150 250 340 For gas installations with natural gases (NG) an liquefie gases (PG) For long-lasting sealing of pipelines Marke in yellow eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Temperature range uring operation -20 - +70 C Accessories Elbow with male an female threa For gas installations Female threa Male threa Ø 34462 15 2,3 0,3 34463 18 2,3 0,3 34464 22 2,4 0,3 34465 28 2,6 0,3 34466 35 2,9 0,3 34467 42 3,3 0,3 34468 54 3,8 0,3 Accessories R Rp Galvanize Prouct Details Prouct material Seal ring NBR yellow For gas installations with natural gases (NG) an liquefie gases (PG) Prouct Details Description Ø 90452 15 90453 18 90454 22 90455 28 90456 35 90457 42 90458 54 90471 76,1 90472 88,9 90473 108 Steel 91095 Mounting plate for gas metre Prouct material NBR Temperature range uring operation -20 - +70 C Prouct Details Prouct material Brass R Rp [''] [''] 91107 1 1 5 4 2,3 Mapress Catalogue 2008/2009 49

Geberit Mapress 50 Mapress Catalogue 2008/2009

Mapress Carbon Steel Description Mapress Pipes Pipes Page 52 Couplings Page 54 Bens Page 55 Pipe briges Page 56 Bens with plain ens Page 56 Reucers Page 57 Mapress Fittings T-pieces / Pipe crosses Page 57 Aapters Page 62 Straight unions Page 66 Flanges Page 67 Expansion fittings Page 70 Closures Page 70 Raiator connectors Page 71 Union connector sets Page 72 Mapress Catalogue 2008/2009 51

Geberit Mapress Mapress Carbon Steel System pipes Mapress System pipes Carbon Steel System pipes Mapress Carbon Steel system pipe outsie zincplate For heating an inustrial applications Not suitable for rinking water Not suitable for cooling systems Pipe outsie zinc-plate, 8-14 μm Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 Prouct Details Prouct material Thermal conuctivity pipe Thermal expansion Surface roughness (m) i Unalloye steel 1.0034 E 195 (DIN EN 10305) 60 W/(m K) 0.016 mm/(m K) 10 μm s Prouct Details Prouct material Thermal conuctivity pipe Thermal expansion Surface roughness Delivery in sections arge bunle For packing units see pricelist Unalloye steel 1.0034 E 195 (DIN EN 10305) 60 W/(m K) 0.016 mm/(m K) 10 μm Ø iø s (m) [m] 29102 15 12,6 1,2 6 29103 18 15,6 1,2 6 29104 22 19 1,5 6 29105 28 25 1,5 6 29106 35 32 1,5 6 29107 42 39 1,5 6 29108 54 51 1,5 6 29159 76,1 72,1 2 6 29160 88,9 84,9 2 6 29161 108 104 2 6 Delivery in sections Small bunle For packing units see pricelist Ø iø s (m) [m] 29252 15 12,6 1,2 6 29253 18 15,6 1,2 6 29254 22 19 1,5 6 29255 28 25 1,5 6 29256 35 32 1,5 6 29257 42 39 1,5 6 29258 54 51 1,5 6 29209 76,1 72,1 2 6 29210 88,9 84,9 2 6 29211 108 104 2 6 Mapress Carbon Steel system pipe outsie cincplate Mapress Carbon Steel system pipe outsie zincplate For heating an inustrial applications Not suitable for rinking water Not suitable for cooling systems Pipe outsie zinc-plate, 8-14 μm Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 Prouct Details Prouct material Thermal conuctivity pipe Thermal expansion Surface roughness (m) i s Unalloye steel 1.0034 E 195 (DIN EN 10305) 60 W/(m K) 0.016 mm/(m K) 10 μm (m) For heating an inustrial applications Not suitable for rinking water Not suitable for cooling systems Pipe outsie zinc-plate, 8-14 μm Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 i s Delivery in sections Mile bunle For packing units see pricelist Ø iø s (m) [m] 29112 15 12,6 1,2 6 29113 18 15,6 1,2 6 29114 22 19 1,5 6 29116 35 32 1,5 6 52 Mapress Catalogue 2008/2009

System pipes Mapress Carbon Steel system pipe zinc-plate, pipe insie an outsie Geberit Mapress Mapress Carbon Steel Mapress Carbon Steel system pipe, outsie PP coate (m) i s (m) D i s For sprinkler applications Pipe insie an outsie zinc-plate Prouct Details Prouct material Thermal conuctivity pipe Thermal expansion Surface roughness Delivery in sections Small bunle For packing units see pricelist Unalloye steel 1.0215 E 220 (DIN EN 10305) 60 W/(m K) 0.016 mm/(m K) 10 μm Ø iø s (m) [m] 19454 22 19 1,5 6 19455 28 25 1,5 6 19456 35 32 1,5 6 19457 42 39 1,5 6 19458 54 51 1,5 6 19459 76,1 72,1 2 6 19460 88,9 84,9 2 6 19461 108 104 2 6 For heating an inustrial applications Not suitable for rinking water Not suitable for cooling systems Free from substances that constrain from painting PP coating white Prouct Details Prouct material Thermal expansion Surface roughness Thermal conuctivity pipe Delivery in sections Small bunle Unalloye steel 1.0034 E 195 (DIN EN 10305) 0.016 mm/(m K) 10 μm 60 W/(m K) Ø iø D s (m) [m] 19202 15 12,6 1,7 1,2 6 19203 18 15,6 2 1,2 6 19204 22 19 2,4 1,5 6 19205 28 25 3 1,5 6 19206 35 32 3,7 1,5 6 19207 42 39 4,4 1,5 6 19208 54 51 5,6 1,5 6 Mapress Catalogue 2008/2009 53

Geberit Mapress Mapress Carbon Steel Couplings Couplings Couplings Coupling For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Ø E 22102 15 2,5 8 22103 18 2,5 8 22104 22 2,5 8,4 22105 28 3 9,1 22106 35 3 10,2 22107 42 4 12 22108 54 4 14 22109 76,1 6 23 22110 88,9 7 26 22111 108 8 31 Galvanize eaky if unpresse Aapter with plain an weling en new Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) 1 Seal rings CIIR black l Ø 22002 15 4,8 0,8 22003 18 4,8 0,8 22004 22 5 0,8 22005 28 5,4 0,8 22006 35 6,2 1 22007 42 7,1 1,1 22008 54 8,3 1,3 22009 76,1 14,1 3,5 22010 88,9 16,2 4,2 22011 108 19,4 4,4 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Not suitable for cooling systems Free from substances that constrain from painting Not galvanize Plain an weling en Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Slip coupling For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water E E Ø 1Ø l 12412 15 17,2 12 3 12413 18 21,3 12 3 12414 22 26,9 12 3,4 12415 28 33,7 12 3,4 12416 35 42,4 12 4 12417 42 48,3 12 4,5 12418 54 60,3 12 5 12419 76,1 76,1 12 7 12420 88,9 88,9 12 7,5 12421 108 114,3 12 9 Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal rings CIIR black 54 Mapress Catalogue 2008/2009

Bens Geberit Mapress Mapress Carbon Steel Bens Bens Ben 90 Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal rings CIIR black Ø 20102 15 4,9 2,9 20103 18 5,3 3,3 20104 22 6,1 4 20105 28 7,2 4,9 23106 35 6,8 4,2 23107 42 8 5 23108 54 10 6,5 20109 76,1 15,3 10 20110 88,9 17,9 11,9 20111 108 22,2 14,7 Ben 90 with plain en For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Plain en Seal ring CIIR black Ø 20302 15 5,9 4,9 2,9 20303 18 6,1 5,3 3,3 20304 22 7 6,1 4 20305 28 7,9 7,2 4,9 23306 35 7,7 6,8 4,2 23307 42 9 8 5 23308 54 11,1 10 6,5 20309 76,1 16,6 15,3 10 20310 88,9 19,4 17,9 11,9 20311 108 24 22,2 14,7 Ben 45 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 45 Seal rings CIIR black Ø 20602 15 3,6 1,6 20603 18 3,7 1,7 20604 22 4,2 2,1 20605 28 4,8 2,5 23606 35 4,3 1,7 23607 42 5,1 2,1 23608 54 6,2 2,7 20609 76,1 9,7 4,4 20610 88,9 11,2 5,2 20611 108 13,9 6,4 Mapress Catalogue 2008/2009 55

Geberit Mapress Mapress Carbon Steel Ben 45 with plain en For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Plain en Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 45 Seal ring CIIR black Ø 20702 15 4,5 3,6 1,6 20703 18 4,2 3,7 1,7 20704 22 5,2 4,2 2,1 20705 28 5,6 4,8 2,5 23706 35 5,3 4,3 1,7 23707 42 6,1 5,1 2,1 23708 54 7,3 6,2 2,7 20709 76,1 11,1 9,7 4,4 20710 88,9 13 11,2 5,2 20711 108 15,7 13,9 6,4 Pipe briges / Bens with plain ens Pipe briges Pipe brige Pipe briges / Bens with plain ens Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Ø 1 2 20802 15 5,7 15,8 3,7 20803 18 6 16,5 4 20804 22 6,5 17,8 4,4 20805 28 7,4 21 5 Bens with plain en / Reucers Bens with plain ens Ben with plain ens 90 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize 1 K1 Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Ø 1 K K1 20402 15 7 12 2,2 7,2 20403 18 7 12 1,7 6,7 20404 22 7 12 0,9 5,9 20405 28 8 12 0,7 4,7 20406 35 12 20 3 11 20407 42 15 25 4,4 14,4 20408 54 20 30 6,5 16,5 K 2 1 For air-conitioning applications For sprinkler systems (wet) For parallel pipes with istance Not suitable for rinking water Not suitable for cooling systems Free from substances that constrain from painting Galvanize 56 Mapress Catalogue 2008/2009

Reucers / T-pieces / Pipe crosses Geberit Mapress Mapress Carbon Steel Reucers / T-pieces / Pipe crosses Reucers Reucer with plain en T-pieces / Pipe crosses T-pieces / Pipe crosses T-piece equal 1 1 1 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water l For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water l Galvanize eaky if unpresse Plain en Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black Ø 1Ø 22303 18 15 3,5 5,5 22305 22 15 3,9 5,9 22306 22 18 3,7 5,7 22307 28 15 4,6 6,6 22308 28 18 4,4 6,4 22309 28 22 3,9 6 22310 35 15 5,5 7,5 22311 35 18 5,5 7,4 22312 35 22 5 7,1 22313 35 28 4,5 6,8 22315 new 42 18 6 8 22316 42 22 6,1 8,2 22317 42 28 6 8,3 22318 42 35 5,1 7,7 22320 new 54 18 7,5 9,5 22321 54 22 7,4 9,5 22322 54 28 8,7 11 22323 54 35 8 10,6 22324 54 42 6,2 9,2 22330 new 76,1 42 9,7 12,7 22331 76,1 54 11,1 14,6 22338 88,9 54 12,8 16,3 22339 88,9 76,1 10,8 16,1 22345 108 54 13,7 17,2 22346 108 76,1 13,1 18,4 22348 108 88,9 14,3 20,3 Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal rings CIIR black Ø 1 l 1 21002 15 6,4 3,9 3,2 1,2 1,9 21003 18 6,8 4,1 3,4 1,4 2,1 21004 22 7,4 4,4 3,7 1,6 2,3 21005 28 8,4 5 4,2 1,9 2,7 21006 35 10 5,7 5 2,4 3,1 21007 42 11,4 6,5 5,7 2,7 3,5 21008 54 13,8 7,7 6,9 3,4 4,2 21009 76,1 23 11 11,5 6,2 5,7 21010 88,9 26 12,8 13 7 6,8 21011 108 31 15,3 15,5 8 7,8 Mapress Catalogue 2008/2009 57

Geberit Mapress Mapress Carbon Steel T-pieces / Pipe crosses T-piece reuce 1 1 1 2 l l2 2 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Reuce Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal rings CIIR black Ø 1Ø 2Ø 21103 15 18 15 6,4 3,6 3,2 3,2 1,2 1,6 21204 18 15 18 6,8 4,2 3,4 3,4 1,4 2,2 21104 15 22 15 6,4 4,2 3,2 3,2 1,2 2,1 21206 22 15 22 7,4 4,4 3,7 3,7 1,6 2,4 21105 18 22 18 6,8 4,1 3,4 3,4 1,4 2 21207 22 18 22 7,4 4,4 3,7 3,7 1,6 2,4 21209 28 15 28 8,4 4,7 4,2 4,2 1,9 2,7 21210 28 18 28 8,4 4,7 4,2 4,2 1,9 2,7 21107 22 28 22 7,4 4,5 3,7 3,7 1,6 2,2 21211 28 22 28 8,4 4,8 4,2 4,2 1,9 2,7 21212 35 15 35 10 5,1 5 5 2,4 3,1 21213 35 18 35 10 5,1 5 5 2,4 3,1 21214 35 22 35 10 5,2 5 5 2,4 3,1 21215 35 28 35 10 5,5 5 5 2,4 3,2 21216 new 42 15 42 11,4 5,3 5,7 5,7 2,7 3,3 21217 new 42 18 42 11,4 5,3 5,7 5,7 2,7 3,3 21218 42 22 42 11,4 5,5 5,7 5,7 2,7 3,4 21219 42 28 42 11,4 5,8 5,7 5,7 2,7 3,5 21220 42 35 42 11,4 6,2 5,7 5,7 2,7 3,6 21221 new 54 15 54 13,8 5,9 6,9 6,9 3,4 3,9 21222 new 54 18 54 13,8 5,9 6,9 6,9 3,4 3,9 21223 54 22 54 13,8 6,1 6,9 6,9 3,4 4 21224 54 28 54 13,8 6,4 6,9 6,9 3,4 4,1 21225 54 35 54 13,8 6,8 6,9 6,9 3,4 4,2 21226 54 42 54 13,8 7,2 6,9 6,9 3,4 4,2 21230 76,1 28 76,1 23 7,9 11,5 11,5 6,2 5,6 21231 76,1 35 76,1 23 8,1 11,5 11,5 6,2 5,5 21232 76,1 42 76,1 23 8,1 11,5 11,5 6,2 5,1 21233 76,1 54 76,1 23 8,7 11,5 11,5 6,2 5,2 Continuation on the next page 1 l l2 1 58 Mapress Catalogue 2008/2009

T-pieces / Pipe crosses Geberit Mapress Mapress Carbon Steel Ø 1Ø 2Ø 21237 88,9 28 88,9 26 8,7 13 13 7 6,4 21238 88,9 35 88,9 26 9 13 13 7 6,4 21239 88,9 42 88,9 26 9,2 13 13 7 6,2 21240 88,9 54 88,9 26 9,3 13 13 7 5,8 21241 88,9 76,1 88,9 26 11,4 13 13 7 6,1 21245 108 28 108 31 10,5 15,5 15,5 8 8,2 21246 108 35 108 31 10,8 15,5 15,5 8 8,2 21247 108 42 108 31 11 15,5 15,5 8 8 21248 108 54 108 31 11,3 15,5 15,5 8 7,8 21249 108 76,1 108 31 12,4 15,5 15,5 8 7,1 21250 108 88,9 108 31 13,5 15,5 15,5 8 7,5 1 l l2 1 Pipe cross 90 I I 1 1 I1 I1 1 1 1 2 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal rings CIIR black Ø 1Ø 1 2 l l1 1 21504 15 15 6,4 6,4 2 3,2 3,2 1,2 1,2 21505 18 15 8,4 6,8 2,5 4,2 3,4 2,2 1,4 21506 22 15 8,4 7,4 2,7 4,2 3,7 2,2 1,6 21509 22 18 8,4 7,4 2,8 4,2 3,7 2,2 1,6 21507 28 15 8,4 8,4 2,9 4,2 4,2 2,2 1,9 21510 28 18 8,4 8,4 3,2 4,2 4,2 2,2 1,9 21512 28 22 8,4 8,4 3,3 4,2 4,2 2,1 1,9 Mapress Catalogue 2008/2009 59

Geberit Mapress Mapress Carbon Steel T-pieces / Pipe crosses Pipe cross 30 I I 1 1 30 1 1 1 1 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 30 Seal rings CIIR black Ø 1Ø 1 l 1 21404 18 15 6,8 4 3,4 1,4 2 21406 22 15 7,4 4,2 3,7 1,6 2,2 21409 28 15 8,4 4,5 4,2 1,9 2,5 60 Mapress Catalogue 2008/2009

T-pieces / Pipe crosses Geberit Mapress Mapress Carbon Steel T-piece with female threa Rp 1 1 1 l l2 2 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Female threa Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal rings CIIR black Ø Rp [''] 1Ø 21304 15 1/2 15 6,4 3,7 3,2 3,2 1,2 2,4 1,2 21305 18 1/2 18 6,8 3,9 3,4 3,4 1,4 2,6 1,4 21307 22 1/2 22 7,4 4 3,7 3,7 1,6 2,7 1,6 21308 new 22 3/4 22 7,4 4,4 3,7 3,7 1,6 2,8 1,6 21309 28 1/2 28 8,4 4,4 4,2 4,2 1,9 3,1 1,9 21310 28 3/4 28 8,4 4,7 4,2 4,2 1,9 3,2 1,9 21312 35 1/2 35 10 4,8 5 5 2,4 3,5 2,4 21313 35 3/4 35 10 5,1 5 5 2,4 3,6 2,4 21316 42 1/2 42 11,4 5,1 5,7 5,7 2,7 3,8 2,7 21317 42 3/4 42 11,4 5,4 5,7 5,7 2,7 3,9 2,7 21320 54 1/2 54 13,8 5,7 6,9 6,9 3,4 4,4 3,4 21321 54 3/4 54 13,8 6 6,9 6,9 3,4 4,5 3,4 21326 76,1 3/4 76,1 23 7,9 11,5 11,5 6,2 6,4 6,2 21331 88,9 3/4 88,9 26 8,8 13 13 7 7,3 7 21336 108 3/4 108 31 10,5 15,5 15,5 8 9 8 1 l l2 1 2 Mapress Catalogue 2008/2009 61

Geberit Mapress Mapress Carbon Steel Aapters Aapters Aapters Aapter with male threa Aapter with male threa an plain en R R For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Male threa For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize Male threa Plain en Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black Ø R [''] 21702 15 3/8 1,8 3,8 21703 15 1/2 2,1 4,1 21714 new 15 3/4 2,6 4,3 21704 18 1/2 2,2 4,2 21705 18 3/4 2,4 4,4 21715 new 22 1/2 2,2 4 21707 22 3/4 2,3 4,4 21717 new 28 3/4 2,6 4,6 21708 28 1 2,5 4,8 21727 new 28 1 1/4 2,8 4,8 21709 35 1 1/4 2,7 5,3 21720 new 35 1 1/2 3 5,3 21710 42 1 1/2 2,7 5,7 21711 54 2 3,6 7,1 21713 new 76,1 2 1/2 7,2 11,9 21724 new 88,9 3 5 13,7 21725 new 108 4 6,1 16 Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Ø R [''] 21932 15 1/2 5,7 21933 18 1/2 5,7 21934 18 3/4 5,9 21935 22 1/2 5,7 21936 22 3/4 5,9 21937 new 28 1 6,6 21938 new 35 1 1/4 8 21939 new 42 1 1/2 9,1 21940 new 54 2 10,2 62 Mapress Catalogue 2008/2009

Aapters Aapter with female threa Aapter with female threa an plain en Geberit Mapress Mapress Carbon Steel Rp Rp For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Female threa Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black Ø Rp [''] 21827 new 15 3/8 3,3 0,3 21802 15 1/2 3,7 0,4 21823 new 15 3/4 3,8 0,7 21803 18 1/2 3,7 0,4 21804 18 3/4 3,8 0,3 21805 new 22 1/2 3,8 0,3 21806 22 3/4 3,9 0,3 21824 new 22 1 4,2 0,4 21807 28 1/2 3,8 0,2 21808 new 28 3/4 3,8 0,1 21809 28 1 4,4 0,4 21810 new 35 3/4 4,2 0,1 21811 new 35 1 1/4 4,9 0,4 21814 new 42 1 1/2 5,3 0,4 21818 new 54 2 6,2 0,5 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize Female threa Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Elbow aapter 90 with male threa Galvanize eaky if unpresse Male threa Ø Rp [''] 21908 new 15 3/8 6 7,4 21902 15 1/2 4,8 6,1 21903 18 1/2 4,8 6,1 21904 18 3/4 4,9 6,4 21905 22 1/2 4,9 6,2 21906 22 3/4 5 6,5 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water R Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal ring CIIR black Ø R [''] 21602 15 3/8 2,1 3,6 1,6 21603 15 1/2 2,6 3,7 1,7 21605 18 1/2 2,6 3,7 1,7 21608 22 3/4 2,9 4,1 2 21609 new 28 3/4 3,2 5,8 3,5 21610 new 28 1 4 5,8 3,5 Mapress Catalogue 2008/2009 63

Geberit Mapress Mapress Carbon Steel Elbow aapter 90 with female threa For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Female threa Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal ring CIIR black Ø 1 1 Rp [''] Ben aapter 90 with male threa 1 1 21659 22 1/2 4,2 4 2,1 2,7 21660 28 1/2 4,7 4,4 2,4 3,1 21661 new 28 3/4 5,8 3,2 3,5 1,8 21662 new 28 1 4,7 4,4 2,4 2,6 Rp Ben aapter 90 with female threa For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Female threa Prouct Details Ø R [''] Aapters 20502 15 3/8 3,7 4,9 2,9 20503 15 1/2 4 4,9 2,9 20505 18 1/2 4,7 5,3 3,3 20507 22 3/4 5,4 6,1 4 20508 28 1 6,6 7,2 4,9 23509 35 1 1/4 10,2 6,8 4,2 23510 42 1 1/2 11,6 8 5 23511 54 2 14,2 10 6,5 1 Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 1 Rp R Seal ring CIIR black Ø Rp [''] 1 1 For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water 20552 15 3/8 4,9 4,5 2,9 3,4 20553 15 1/2 4,9 4,8 2,9 3,3 20555 18 1/2 5,3 5,2 3,3 3,7 20557 22 3/4 6,1 6 4 4,4 20558 28 1/2 7,2 6,5 4,9 5 Galvanize eaky if unpresse Male threa 20559 new 28 1 7,2 6,6 4,9 4,7 20560 new 35 1 1/4 6,8 7,5 4,2 5,4 20561 new 42 1 1/2 8 8,4 5 6,3 20562 new 54 2 10 10,4 6,5 7,8 Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Angle 90 Seal ring CIIR black 64 Mapress Catalogue 2008/2009

Aapters Aapter union with male threa For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Male threa Removable, flat seal Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black EPDM flat gasket Ø R [''] 25330 15 1/2 4,1 6,1 25332 18 1/2 4,1 6,1 25335 22 3/4 4,7 6,8 25329 new 22 1 4,8 6,9 25337 28 1 5,2 7,5 25338 35 1 1/4 5,4 8 25339 42 1 1/2 5,5 8,5 25340 54 2 6,2 9,7 R Seal ring CIIR black EPDM flat gasket Ø Rp [''] Aapter union with clamping ring For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Removable, flat seal Screw connection mae of malleable cast iron Geberit Mapress Mapress Carbon Steel 25300 15 1/2 5,8 2,3 25302 18 1/2 5,8 2,3 25304 22 3/4 6,3 2,3 25305 22 1 6,6 3 25306 28 1 7,1 3,3 25307 35 1 1/4 7,7 3,5 25308 42 1 1/2 8,2 3,1 25309 54 2 9,5 3,4 1 Aapter union with female threa new Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Rp Seal ring CIIR black For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Not suitable for cooling systems Free from substances that constrain from painting Galvanize Union nut mae of brass eaky if unpresse Female threa Removable, flat seal Ø 1Ø 22412 15 21,3 8,9 2,3 10 22413 18 21,3 8,9 2,3 10 22414 22 26,9 9,1 2,3 10 22415 28 33,7 9,5 2,4 10 22416 35 42,4 10,2 2,5 10 22417 42 48,3 11,5 2,4 10 22418 54 60,3 12,2 2,5 10 PN Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Mapress Catalogue 2008/2009 65

Geberit Mapress Mapress Carbon Steel Aapter with union nut For air-conitioning applications For sprinkler systems (wet) For raiator connectors Not suitable for rinking water Galvanize eaky if unpresse Union nut nickel-plate Flat seale Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black EPDM flat gasket Ø G [''] 25042 15 1/2 5,1 2,5 25048 18 1/2 5,3 2,6 25049 22 3/4 5,4 2,7 G Straight unions Ø G [''] Straight union with pressfittings on both ens Straight unions 25032 15 3/4 3,7 1,1 25033 18 3/4 3,7 1,1 25040 18 1 3,9 1,1 25041 18 1 1/8 3,7 0,8 25034 22 1 4 1,1 25044 22 1 1/4 4,3 1,3 25035 28 1 1/4 4,4 1,3 25050 28 1 1/2 4,6 1,3 25036 35 1 1/2 4,8 1,3 25051 35 2 4,8 1,2 25037 42 1 3/4 5,2 1,3 25052 42 2 5,4 1,4 25053 42 2 1/4 5,6 1,4 25038 54 2 3/8 5,8 1,5 25054 54 2 1/2 6,3 1,4 25055 54 2 3/4 6,3 1,4 25045 new 76,1 3 9,9 3,3 25046 new 88,9 3 1/2 11,1 3,7 Straight unions Aapter with union nut G For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Union nut mae of brass Flat seale Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black EPDM flat gasket Galvanize eaky if unpresse Removable, flat seal Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal rings CIIR black EPDM flat gasket Ø 25320 15 6,6 2,6 25321 18 6,9 2,9 25322 22 7,2 3 25323 28 7,7 3,1 25324 35 8,2 3 25325 42 9,5 3,5 25326 54 11,3 4,3 66 Mapress Catalogue 2008/2009

Flanges Geberit Mapress Mapress Carbon Steel Flanges Flanges Flange with pressing socket i m k D For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black Exclue: Set of bolts for flange Exclue: Flange gasket Ø iø D k 23694 new 22 19 10,5 7,5 1,4 1,6 6,3 4,2 4 10 / 16 23695 new 28 25 11,5 8,5 1,4 1,6 6,7 4,4 4 10 / 16 23696 new 35 32 14 10 1,8 1,8 7,2 4,6 4 10 / 16 23697 new 42 39 15 11 1,8 1,8 7,9 4,9 4 10 / 16 23698 new 54 54,3 16,5 12,5 1,8 1,8 8,7 5,2 4 10 / 16 23709 76,1 72,1 18,5 14,5 1,8 1,8 12,6 7,3 4 10 / 16 23710 88,9 84,9 20 16 1,8 2 14,3 8,3 8 10 / 16 23711 108 104 22 18 1,8 2 16,8 9,3 8 10 / 16 m n [St] PN Mapress Catalogue 2008/2009 67

Geberit Mapress Mapress Carbon Steel Flange with pressing socket Flanges new i m k D For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Not suitable for cooling systems eaky if unpresse Free from substances that constrain from painting Galvanize Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal ring CIIR black Exclue: Set of bolts for flange Exclue: Flange gasket Ø iø D k 23722 22 19 9 6,5 1,1 1,4 6,1 4 4 6 23723 28 25 10 7,5 1,1 1,4 6,5 4,2 4 6 23724 35 32 12 9 1,4 1,6 7 4,4 4 6 23725 42 39 13 10 1,4 1,6 7,7 4,7 4 6 23726 54 51 14 11 1,4 1,6 8,5 5 4 6 23727 76,1 72,4 16 13 1,4 1,6 12,9 7,6 4 6 23728 88,9 85,2 19 15 1,8 1,8 14,6 8,6 4 6 23729 108 104,3 21 17 1,8 1,8 17,1 9,6 4 6 m n [St] PN 68 Mapress Catalogue 2008/2009

Flanges Flange PN 6 with plain en Geberit Mapress Mapress Carbon Steel new i h m k D For air-conitioning applications For sprinkler systems (wet) Not suitable for rinking water Not suitable for cooling systems eaky if unpresse Free from substances that constrain from painting Galvanize Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Exclue: Set of bolts for flange Exclue: Flange gasket Ø iø D k 23732 22 19 9 6,5 1,1 1,4 7,5 4 6 23733 28 25 10 7,5 1,1 1,4 7,7 4 6 23734 35 32 12 9 1,4 1,6 8,8 4 6 23735 42 39 13 10 1,4 1,6 10,5 4 6 23736 54 51 14 11 1,4 1,6 11,1 4 6 23737 76,1 72,4 16 13 1,4 1,6 14,7 4 6 23738 88,9 85,2 19 15 1,8 1,8 16,1 4 6 23739 108 104,3 21 17 1,8 1,8 17,5 4 6 m n [St] PN Mapress Catalogue 2008/2009 69

Geberit Mapress Mapress Carbon Steel Expansion fittings / Closures Bolt set for flange joints lk Closures Closures Plug M For flanges Not suitable for Mapress Stainless Steel Galvanize Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) 4 screws 4 nuts 8 washers Expansion fittings / Closures M lk 91069 16 5,5 3,3 91070 16 6 3,8 91071 16 6,5 4,3 91072 16 7 4,8 91073 16 8 5,8 Expansion fittings For air-conitioning applications For sprinkler systems (wet) For long-lasting sealing of pressing sockets Not suitable for rinking water Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Ø E E 90212 15 3,3 4,2 90213 18 3,3 4 90214 22 3,4 4,3 90215 28 3,6 4,7 90216 35 4 4,9 90217 42 4,4 5,5 90218 54 4,9 6,2 Axial expansion fitting with pressing sockets new a D Not suitable for rinking water Not suitable for cooling systems eaky if unpresse Bantling in stainless steel Seal rings CIIR black Ø D a 23922 15 2,7 0,7 15,1 23923 18 2,7 0,7 14,7 23924 22 3,5 1,1 10,6 23925 28 4,2 1 12 23926 35 4,2 1 13,9 23927 42 5,6 1,1 14,9 23928 54 7,2 1,4 17,6 23929 76,1 9,4 2,2 26,2 23930 88,9 10,5 2,3 28,6 23931 108 13,6 2,3 54,2 70 Mapress Catalogue 2008/2009

Raiator connectors Geberit Mapress Mapress Carbon Steel Cap Raiator connectors Raiator connectors Raiator connector for inlet an return flow 1 1 For air-conitioning applications For sprinkler systems (wet) For closing pipe ens Not suitable for rinking water Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) For air-conitioning applications Not suitable for rinking water Galvanize eaky if unpresse Flow an return exchangeable 24 4-6 24 1 3 5 l1 Seal ring CIIR black Ø 20212 15 2,3 0,3 20213 18 2,3 0,3 20214 22 2,4 0,3 20215 28 2,6 0,3 20216 35 2,9 0,3 20217 42 3,3 0,3 20218 54 3,8 0,3 20219 new 76,1 5,7 0,4 20220 new 88,9 6,5 0,5 20221 new 108 8 0,5 Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal rings CIIR black Ø 1Ø Raiator connector for return flow 1 l1 24002 15 15 2,7 10,8 1,6 10 24003 18 15 2,9 11 1,6 10 24004 22 15 3,3 11,2 1,9 9,9 1 1 3 5 l1 For air-conitioning applications Not suitable for rinking water 1 24 1 24 Galvanize eaky if unpresse Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal rings CIIR black Ø 1Ø 1 l1 1 23602 15 15 2,7 10,8 1,6 10 20 23603 18 15 2,9 11 1,6 10 20 23604 22 15 3,3 11,2 1,9 9,9 19,8 Mapress Catalogue 2008/2009 71

Geberit Mapress Mapress Carbon Steel Union connector sets Raiator connector with clamping ring union for inlet an return flow Union connector sets Union connector sets 1 1 Union connector set for Euro cone G3/4" new 6 8 1 3 5 4-6 24 l1 G 24 For air-conitioning applications Not suitable for rinking water Galvanize eaky if unpresse Flow an return exchangeable Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Seal rings CIIR black 2 Clamping ring unions Ø 1Ø 1 l1 24022 15 15 2,7 12,6 1,6 10 24023 18 15 2,9 12,7 1,6 10 24024 22 15 3,3 13 1,9 9,9 For copper pipes blank, nickel-plate an chrome-plate For Mapress carbon steel system pipes For Mapress stainless steel 1.4401 system pipes For istributors an raiator valves to Euro cone G3/4" Not suitable for rinking water Union nut nickel-plate 2 Connectors with union nut Ø G [''] 25072 15 3/4 72 Mapress Catalogue 2008/2009

Connectors for raiators Geberit Mapress Mapress Carbon Steel Connectors for raiators Connectors for raiators Pipe connector box with Mapress Carbon Steel system pipe new 1 X B b h l X1 Prefabricate raiator connection for installation in the rough-in phase Not suitable for rinking water Not suitable for cooling systems Connection box, EPS Pressure test without mounting of the raiators Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) Ø B b X X1 24032 15 10,5 5 18,5 5 27 22 22,3 6,3 4,5 h 1 l Mapress Catalogue 2008/2009 73

Geberit Mapress 74 Mapress Catalogue 2008/2009

Mapress CuNiFe Description Mapress Pipes Pipes Page 76 Couplings Page 76 Bens Page 77 Bens with plain ens Page 77 Mapress Fittings Ben aapters Page 78 Reucers Page 79 T-pieces Page 79 Aapters Page 82 Flanges Page 83 Bulkhea an eck passings Page 84 Mapress Catalogue 2008/2009 75

Geberit Mapress MapressCuNiFe System pipes / Couplings MapressCuNiFe System pipes / Couplings System pipes MapressCuNiFe system pipe (m) For pipe systems carrying sea water Not suitable for rinking water Noncombustible, combustible substance class A1 in acc. with DIN 4102-1 Seamlessly rawn i s Slip coupling Ø 67002 15 4,8 0,8 67004 22 5 0,8 67005 28 5,4 0,8 67006 35 6,2 1 67007 42 7,1 1,1 67008 54 8,3 1,3 67009 76,1 14,1 3,5 67010 88,9 16,2 4,2 67011 108 19,4 4,4 Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Thermal conuctivity pipe 50 W/(m K) Thermal expansion 0.017 mm/(m K) E E Delivery in sections Ø iø s (m) [m] 56319 15 13 1 5-6 56321 22 20 1 5-6 56326 22 19 1,5 5-6 56322 28 25 1,5 5-6 56323 35 32 1,5 5-6 56324 42 39 1,5 5-6 56325 54 51 1,5 5-6 56327 76,1 72,1 2 5-6 56328 88,9 84,9 2 5-6 56329 108 104 2,5 5-6 Muffen Couplings Coupling For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Seal rings CIIR black Ø E 67102 15 2,5 8 67104 22 2,5 8,4 67105 28 3 9,1 67106 35 3 10,2 67107 42 4 12 67108 54 4 14 67109 76,1 6 23 67110 88,9 7 26 67111 108 8 31 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Seal rings CIIR black 76 Mapress Catalogue 2008/2009

Bens / Bens with plain ens Geberit Mapress MapressCuNiFe Bens / Bens with plain ens Bens Ben 90 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Bens with plain ens / Ben aapters Ø Ben 90 with plain en 67602 15 2,8 0,8 67604 22 3,2 1,1 67605 28 3,7 1,4 67606 35 4,3 1,7 67607 42 5,1 2,1 67608 54 6,2 2,7 67609 76,1 9,7 4,4 67610 88,9 11,2 5,2 67611 108 13,9 6,4 Bens with plain ens Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal rings CIIR black Ø 68102 15 3,8 1,8 68104 22 4,7 2,6 68105 28 5,7 3,4 68106 35 6,8 4,2 68107 42 8 5 68108 54 10 6,5 68109 76,1 15,3 10 68110 88,9 17,9 11,9 68111 108 22,2 14,7 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Plain en Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal ring CIIR black Ben 45 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Ø 68302 15 5,1 3,8 1,8 68304 22 6 4,7 2,6 68305 28 6,6 5,7 3,4 68306 35 7,7 6,8 4,2 68307 42 9 8 5 68308 54 11,1 10 6,5 68309 76,1 16,6 15,3 10 68310 88,9 19,4 17,9 11,9 68311 108 24 22,2 14,7 Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 45 Seal rings CIIR black Mapress Catalogue 2008/2009 77

Geberit Mapress MapressCuNiFe Ben aapters Ben with plain ens 90 Ben aapters Ben aapters For pipe systems carrying sea water Not suitable for rinking water Prouct Details 1 K1 Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Ø 1 K K1 67402 15 7 12 2,2 7,2 67404 22 7 12 0,9 5,9 67405 28 8 12 0,7 4,7 67406 35 12 20 3 11 67407 42 15 25 4,4 14,4 67408 54 20 30 6,5 16,5 Ben 45 with plain en For pipe systems carrying sea water Not suitable for rinking water K Ben aapter 90 with male threa For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Male threa Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal ring CIIR black Ø R [''] 67515 15 1/2 7,5 3,8 1,8 67516 22 1/2 8,4 4,7 2,6 67517 22 3/4 8,8 4,7 2,6 67518 28 1 9,7 5,7 3,4 67519 35 1 1/4 11,2 6,8 4,2 67520 42 1 1/2 12,6 8 5 67521 54 2 15,3 10 6,5 R eaky if unpresse Plain en Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 45 Seal ring CIIR black Ø 67702 15 3,7 2,8 0,8 67704 22 4,4 3,2 1,1 67705 28 5 3,7 1,4 67706 35 5,2 4,3 1,7 67707 42 6,1 5,1 2,1 67708 54 7,3 6,2 2,7 67709 76,1 11,1 9,7 4,4 67710 88,9 13 11,2 5,2 67711 108 15,7 13,9 6,4 78 Mapress Catalogue 2008/2009

Reucers / T-Pieces Ben aapter 90 with female threa For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Female threa Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal ring CIIR black 1 1 Rp T-pieces Ø 1Ø Geberit Mapress MapressCuNiFe 67305 22 15 3,9 5,9 67307 28 15 4,6 6,6 67309 28 22 3,9 6 67312 35 22 5 7,1 67313 35 28 4,5 6,8 67317 42 28 6 8,3 67318 42 35 4,7 7,3 67323 54 35 8 10,6 67324 54 42 5,9 8,9 67337 76,1 42 13,4 16,4 67325 76,1 54 11,1 14,6 67338 88,9 54 12,8 16,3 67327 88,9 76,1 10,7 16 67346 108 76,1 13,1 18,4 67330 108 88,9 14,4 20,4 T-pieces Ø Rp 1 1 [''] 67503 15 1/2 3,8 7,7 1,8 6,4 67506 22 1/2 4,7 8,6 2,6 7,3 67507 22 3/4 4,7 8,8 2,6 7,3 67508 28 1 5,7 9,7 4 7,8 67509 35 1 1/4 6,8 11 4,2 9,1 67510 42 1 1/2 8 12,3 5 10,4 67511 54 2 10 15,3 6,5 13 Reucers / T-Pieces Reucers Reucer with plain en T-piece 90 equal For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse 1 1 l l 1 Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal rings CIIR black For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Plain en Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Seal ring CIIR black Ø 1 l 1 68002 15 6,4 4 3,2 1,2 2 68004 22 7,4 4,5 3,7 1,6 2,4 68005 28 8,4 5,1 4,2 1,9 2,8 68006 35 10 5,9 5 2,4 3,3 68007 42 11,4 6,6 5,7 2,7 3,6 68008 54 13,8 7,2 6,9 3,4 3,7 68009 76,1 23 11 11,5 6,2 5,7 68010 88,9 26 12,8 13 7 6,8 68011 108 31 15,3 15,5 8 7,8 Mapress Catalogue 2008/2009 79

Geberit Mapress MapressCuNiFe T-pieces T-piece 90 reuce 1 1 1 2 l l2 2 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Reuce Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal rings CIIR black Ø 1Ø 2Ø 1 l l2 1 2 67206 22 15 22 7,4 4,4 3,7 3,7 1,6 2,4 1,6 67209 28 15 28 8,4 4,7 4,2 4,2 1,9 2,7 1,9 67211 28 22 28 8,4 4,8 4,2 4,2 1,9 2,7 1,9 67212 35 15 35 10 4,9 5 5 2,4 2,9 2,4 67214 35 22 35 10 5,2 5 5 2,4 2,1 2,4 67215 35 28 35 10 5,5 5 5 2,4 3,2 2,4 67218 42 22 42 11,4 5,4 5,7 5,7 2,7 3,3 2,7 67219 42 28 42 11,4 5,8 5,7 5,7 2,7 3,5 2,7 67220 42 35 42 11,4 6,2 5,7 5,7 2,7 3,6 2,7 67227 54 22 54 13,8 6,1 6,9 6,9 3,4 4 3,4 67228 54 28 54 13,8 6,4 6,9 6,9 3,4 4,1 3,4 67225 54 35 54 13,8 6,8 6,9 6,9 3,4 4,2 3,4 67226 54 42 54 13,8 7,2 6,9 6,9 3,4 4,2 3,4 67229 76,1 22 76,1 23 7,7 11,5 11,5 6,2 5,6 6,2 67230 76,1 28 76,1 23 7,9 11,5 11,5 6,2 5,6 6,2 67231 76,1 35 76,1 23 8,1 11,5 11,5 6,2 5,5 6,2 67252 76,1 42 76,1 23 8,1 11,5 11,5 6,2 5,1 6,2 67253 76,1 54 76,1 23 8,7 11,5 11,5 6,2 5,2 6,2 67233 88,9 22 88,9 26 8,5 13 13 7 6,4 7 67250 88,9 28 88,9 26 8,7 13 13 7 6,4 7 67251 88,9 35 88,9 26 9 13 13 7 6,4 7 67239 88,9 42 88,9 26 9,2 13 13 7 6,2 7 67260 88,9 54 88,9 26 9,3 13 13 7 5,8 7 67261 88,9 76,1 88,9 26 11,4 13 13 7 6,1 7 67244 108 22 108 31 10,3 15,5 15,5 8 8,2 8 67245 108 28 108 31 10,5 15,5 15,5 8 8,2 8 67246 108 35 108 31 10,8 15,5 15,5 8 8,2 8 67247 108 42 108 31 11 15,5 15,5 8 8 8 67248 108 54 108 31 11,3 15,5 15,5 8 7,8 8 67269 108 76,1 108 31 12,4 15,5 15,5 8 7,1 8 67270 108 88,9 108 31 13,5 15,5 15,5 8 7,5 8 80 Mapress Catalogue 2008/2009

T-pieces Geberit Mapress MapressCuNiFe T-piece 90 with female threa Rp 1 1 1 l l2 2 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Female threa Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Angle 90 Seal rings CIIR black Ø Rp 1Ø 1 l l2 1 2 [''] 67344 15 1/2 15 6,4 3,7 3,2 3,2 0,8 2,4 0,8 67347 22 1/2 22 7,4 4,1 3,7 3,7 1,6 2,8 1,6 67348 22 3/4 22 7,4 4,6 3,7 3,7 1,6 3,1 1,6 67349 28 1/2 28 8,4 4,4 4,2 4,2 1,9 3,1 1,9 67350 28 3/4 28 8,4 4,6 4,2 4,2 1,9 3,1 1,9 67352 35 1/2 35 10 4,8 5 5 2,4 3,5 2,4 67353 35 3/4 35 10 5,3 5 5 2,4 4 2,4 67356 42 1/2 42 11,4 5,1 5,7 5,7 2,7 3,8 2,7 67357 42 3/4 42 11,4 5,6 5,7 5,7 2,7 4,3 2,7 67360 54 1/2 54 13,8 5,7 6,9 6,9 3,4 4,4 3,4 67361 54 3/4 54 13,8 6,2 6,9 6,9 3,4 4,9 3,4 67365 76,1 1/2 76,1 23 7,3 11,5 11,5 6,2 6 6,2 67366 76,1 3/4 76,1 23 7,9 11,5 11,5 6,2 6,4 6,2 67368 88,9 1/2 88,9 26 8,1 13 13 7 6,8 7 67369 88,9 3/4 88,9 26 8,8 13 13 7 7,3 7 67372 108 1/2 108 31 9,9 15,5 15,5 8 8,6 8 67373 108 3/4 108 31 10,5 15,5 15,5 8 9 8 Mapress Catalogue 2008/2009 81

Geberit Mapress MapressCuNiFe Aapters Aapters Aapters Aapter with male threa R Ø Rp [''] 67802 15 1/2 5,5 2,2 67805 22 1/2 5,6 2,2 67806 22 3/4 5,8 2,2 67809 28 1 6,4 2,4 67811 35 1 1/4 7 2,5 67814 42 1 1/2 7,4 2,5 67818 54 2 8,9 3,1 For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Male threa Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Seal ring CIIR black Ø R [''] 68703 15 1/2 3,3 5,3 68715 22 1/2 3,3 5,4 68707 22 3/4 3,7 5,8 68708 28 1 4,1 6,4 68709 35 1 1/4 4,6 7,2 68710 42 1 1/2 4,7 7,7 68711 54 2 5,4 8,9 Aapter with female threa For pipe systems carrying sea water Not suitable for rinking water Rp Aapter union with male threa For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse Male threa Removable, flat seal Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Seal ring CIIR black EPDM flat gasket Ø R [''] 67232 15 1/2 6,1 8,1 67234 22 1/2 6,3 8,4 67243 22 3/4 6,4 8,5 67235 28 1 7,3 9,6 67236 35 1 1/4 7,8 10,4 67237 42 1 1/2 7,9 10,9 67238 54 2 8,9 12,4 R eaky if unpresse Female threa Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Seal ring CIIR black 82 Mapress Catalogue 2008/2009

Flanges Geberit Mapress MapressCuNiFe Flanges Flanges Flange with pressing socket PN 6 Seal ring CIIR black Exclue: Set of bolts for flange Exclue: Flange gasket For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse With pressing socket i m k D Ø iø D k m 68764 15 13 9,5 6,5 1,4 0,8 5,3 3,3 68766 22 19 10,5 7,5 1,4 0,8 5,5 3,4 68767 28 25 11,5 8,5 1,4 0,9 6 3,7 68768 35 32 14 10 1,8 1 6,4 3,8 68769 42 39 15 11 1,8 1,1 7,2 4,2 68770 54 51 16,5 12,5 1,8 1,3 8,2 4,7 68771 76,1 72,1 18,5 14,5 1,8 1,3 12,1 6,8 68772 88,9 84,9 20 16 1,8 1,3 13,6 7,6 68773 108 104 22 18 1,8 1,6 16,4 8,9 Prouct Details Prouct Material Seal ring CIIR black Exclue: Set of bolts for flange Exclue: Flange gasket CuNiFe moifie Flange stub with plain en for loose flange PN 6 2 1 i new Ø iø D k m Flange with pressing socket PN 10/16 68774 15 13 8 5,5 1,1 0,6 5 3 68776 22 19 9 6,5 1,1 0,6 5,1 3 68777 28 25 10 7,5 1,1 0,8 5,9 3,6 68778 35 32 12 9 1,4 0,8 6,1 3,5 68779 42 39 13 10 1,4 0,9 7 4 68780 54 51 14 11 1,4 1,1 8,3 4,8 68781 76,1 72,1 16 13 1,4 1,3 12,3 7 68782 88,9 84,9 19 15 1,8 1,3 13,8 7,8 68783 108 104 21 17 1,8 1,6 16,6 9,1 i For loose flange For pipe systems carrying sea water Not suitable for rinking water Resistant to sea water Plain en Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket h For pipe systems carrying sea water Not suitable for rinking water eaky if unpresse With pressing socket Prouct Details Prouct Material m k D CuNiFe moifie Ø 1Ø 2Ø iø h 68756 22 27 50 19 13,5 0,6 68757 28 32 60 25 13,5 0,6 68758 35 40 70 32 13,5 0,6 68759 42 47 80 39 13,5 0,6 68760 54 59 90 51 13,5 0,8 68761 76,1 78 110 72,1 13,5 0,8 68762 88,9 91 128 84,9 13,5 1 68763 108 110 148 104 13,5 1 Mapress Catalogue 2008/2009 83

Geberit Mapress MapressCuNiFe Flange stub with plain en for loose flange PN 10/16 new Bulkhea an eck passings Bulkhea an eck passings Bulkhea an eck passings Bulkhea an eck passing with plain ens 2 1 i l l h For pipe systems carrying sea water For loose flange Not suitable for rinking water Resistant to sea water Plain en Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Exclue: oose flange Exclue: Set of bolts for flange Exclue: Flange gasket Ø 1Ø 2Ø iø h 68791 22 27 58 19 13,5 0,6 68793 28 32 68 25 13,5 0,6 68794 35 40 78 32 13,5 0,6 68795 42 47 88 39 13,5 0,6 68796 54 59 102 51 13,5 0,8 68797 76,1 78 122 72,1 13,5 0,8 68798 88 91 138 84,9 13,5 1 68799 108 110 158 104 13,5 1 For pipe systems carrying sea water To wel into ships bulkheas Not suitable for rinking water Prouct Details Prouct material CuNi10Fe1.6Mn, material no. 2.1972.11 Ø l 92080 15 45 16,5 92082 22 45 16,5 92083 28 45 16,5 92084 35 45 16,5 92085 42 45 16,5 92086 54 45 16,5 92087 76,1 45 16,5 92088 88,9 45 16,5 92089 108 45 16,5 84 Mapress Catalogue 2008/2009

Mapress Accessories Description Ball valves Page 86 Seal rings Page 88 Mapress Accessories Gaskets Page 89 Mepla - Mapress aapters Page 90 Aitional parts Page 90 Mounting brackets Page 91 Soun insulations Page 93 Mapress Catalogue 2008/2009 85

Geberit Mapress Mapress Accessories Ball valves Mapress Ball Stainless valvesaccessories steel 1.4408 Ball valves Mapress flange ball valve - Stainless steel 2 1 Ø 1 2 94922 15 7,5 4,4 8,5 2 94923 18 8 4,4 8,5 2 94924 22 8,8 5,2 10,4 2,1 94925 28 9,4 5,6 10,5 2,3 94926 35 10,5 6,1 10,5 2,6 Ball mae of chrome-plate brass eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black Ø 1 Surface-mounte stop valve with lever 2 90965 15 12,5 5,5 9,5 4,3 90966 18 12,5 5,5 9,5 4,3 90967 22 13,5 6,5 11 4,7 90968 28 14,7 7,5 14 5,1 90969 35 17,3 8 14 6,1 90970 42 19,6 9,5 16,5 6,8 90971 54 22,4 10,5 16,5 7,7 90972 76,1 30,1 13,5 22 9,8 90973 88,9 34 14,5 22 11 90974 108 41,8 17,5 32,5 13,4 2 Mapress check valve flange - Stainless steel eaky if unpresse Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4408 (DIN EN 10088) Seal rings CIIR black Ø PN 92020 15 13 4,5 40 92022 22 12,6 4,2 40 92023 28 13,6 4,5 16 92024 35 15,5 5,2 16 92025 42 17,9 6 16 92026 54 20,1 6,6 16 92027 76,1 27,6 8,5 16 92028 88,9 30,7 9,4 16 92029 108 38,2 11,6 16 1 For expose installation For installations with Mapress Carbon Steel an Mapress Copper Not suitable for rinking water Not suitable for gas installations Ball mae of chrome-plate brass eaky if unpresse Prouct Details Prouct material Brass Seal rings CIIR black 86 Mapress Catalogue 2008/2009

Ball valves Mapress ball valve flange, stainless steel, with hose connector Geberit Mapress Mapress Accessories Extension set for Mapress surface-mounte stop valve 2 G 1 With pressing socket Threae nipple with brass sealing cap eaky if unpresse For Mapress surface-mounte stopvalve Screw ock nut Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4408 (DIN EN 10088) Seal ring CIIR black Ø G [''] 1 2 92041 15 3/4 12,8 10,5 5 3,7 40 92043 22 1 13,8 12,5 6 4 40 PN Ø 94935 15-18 6 94936 22-35 6,5 Mapress conceale stop valve with cover collar 1 Set lever for Mapress surface-mounte stop valve Ball mae of chrome-plate brass eaky if unpresse For Mapress surface-mounte stopvalve ock nut Ø 94931 15-18 94932 22-35 Prouct Details Prouct material Stainless Cr-Ni-Mo steel 1.4401 BS 316 Seal rings CIIR black Ø 1 94915 15 10,4 7,5 3,2 94916 18 10,3 7,5 3,2 94917 22 11,7 7,5 3,8 Mapress Catalogue 2008/2009 87

Geberit Mapress Mapress Accessories Seal rings Seal rings Seal rings Seal ring CIIR black Seal ring FKM re Prouct Details Prouct material CIIR Temperature range uring operation -30 - +120 C Ø 90402 15 90403 18 90404 22 90405 28 90406 35 90407 42 90408 54 90409 76,1 90410 88,9 90411 108 Solar seal ring FKM green For inustrial an marine applications For sprinkler systems, wet an ry For oil supply systems Prouct Details Prouct material FKM Temperature range uring operation -30 - +120 C Ø 90422 15 90423 18 90424 22 90425 28 90426 35 90427 42 90428 54 90429 76,1 90430 88,9 90431 108 Seal ring FEPM green new For solar systems Not suitable for heating oil E Prouct Details Prouct material FKM Temperature range uring operation -30 - +180 C Operating pressure max. 10 bar Ø 90442 15 90443 18 90444 22 90445 28 90446 35 90447 42 90448 54 For applications with heating oil E use seal ring FKM re. For cleaning an isinfection with saturatre steam below 180 C Not suitable for heating oil E Prouct Details Prouct material FEPM Temperature range uring operation -10 - +180 C Ø 90483 15 90484 18 90485 22 90486 28 90487 35 90488 42 90489 54 90490 76,1 90491 88,9 90492 108 For applications with heating oil E use seal ring FPM re. 88 Mapress Catalogue 2008/2009

Gaskets Geberit Mapress Mapress Accessories Gaskets Gaskets Flat gasket black Flange gasket, PN 6 i D For aapter union, flat sealing Prouct Details Prouct material EPDM For Mepla an Mapress flanges Prouct Details Prouct material Centellen D 3822 G [''] iø D 90081 3/4 13 2,4 0,2 90087 3/4 16 2,4 0,2 90082 1 20 3 0,2 90083 1 1/4 25 3,9 0,2 90084 1 1/2 32 4,5 0,2 90085 1 3/4 39 5,1 0,2 90086 2 3/8 51 6,6 0,3 iø D 91041 20 4,4 0,2 91042 25 5,4 0,2 91043 30 6,4 0,2 91044 38 7,6 0,2 91045 45 8,6 0,2 91046 57 9,6 0,2 91047 76 11,6 0,2 91048 89 13,2 0,2 91049 108 15,2 0,2 Flat gasket green Flange gasket, PN 10 / 16 G i D i D For aapter union, flat sealing For solar systems For oil supply systems For inustrial an marine applications For sprinkler systems, wet an ry Prouct Details Prouct material G [''] iø FKM D 90092 3/4 13 2,4 0,2 90093 3/4 16 2,4 0,2 90094 1 20 3 0,2 90095 1 1/4 25 3,9 0,2 90096 1 1/2 32 4,5 0,2 90097 1 3/4 39 5,1 0,2 90098 2 3/8 51 6,6 0,3 For Mepla an Mapress flanges For gas installations with operating pressure of max. 5 bar Prouct Details Prouct material Centellen D 3822 iø D 91031 20 5 0,2 91032 25 6 0,2 91033 30 7 0,2 91034 38 8,2 0,2 91035 45 9,2 0,2 91036 57 10,7 0,2 91037 76 12,7 0,2 91038 89 14,2 0,2 91039 108 16,2 0,2 Mapress Catalogue 2008/2009 89

Geberit Mapress Mapress Accessories Mepla - Mapress aapters / Aitional parts Mepla - Mapress aapters / Aitional parts Mepla - Mapress aapters Mepla - Mapress aapter Aitional parts Aitional parts Set of bolts for flange joints lk 1 M For sanitary, heating an inustrial purposes For the transition of Mepla onto Mapress Stainless Steel, Mapress Copper or Mapress Carbon Steel No oxygen iffusion eaky if unpresse Prouct Details Prouct material Gun metal Temperature range uring operation 0-70 C Temperature range uring storage -20 - +50 C O-ring EPDM Ø 1Ø 601.508.00.5 16 15 5,9 1,2 602.508.00.5 20 18 6,1 1,2 602.509.00.5 20 22 6,2 1,2 603.508.00.5 26 22 6,7 1,2 604.508.00.5 32 28 6,6 1,3 605.508.00.5 40 35 7,5 1,3 606.508.00.5 50 42 10,1 3,1 607.508.00.5 63 54 13,6 3,2 For flanges Not suitable for Mapress Carbon Steel Prouct Details Prouct material Stainless Cr-Ni steel 1.4301 (DIN EN 10088) Screw Nut 2 washers M Bolt set for flange joints lk 91060 12 5 3 91061 16 6 3,8 91062 16 7 4,8 lk M For flanges Not suitable for Mapress Stainless Steel Galvanize Prouct Details Prouct material Unalloye steel 1.0034 E 195 (DIN EN 10305) 4 screws 4 nuts 8 washers M lk 91069 16 5,5 3,3 91070 16 6 3,8 91071 16 6,5 4,3 91072 16 7 4,8 91073 16 8 5,8 90 Mapress Catalogue 2008/2009

Mounting brackets Geberit Mapress Mapress Accessories Acoustic insulation Mounting brackets Mounting brackets Mounting bracket, single 3 6 4 Description 90070 Soun insulation base Wall fixation for elbow aapter 90 5 8 58 17 2 11 6 46 For fastening faucet connections For faucet connection single Galvanize Offset Prouct Details Prouct material Steel Description 90282 Wall fixation for elbow aapter 90 Pipe clamp with soun insulation, sleeve inclue M8/M10 M Fastening material Description 601.733.00.1 Mounting bracket for single faucet connection Mounting bracket, ouble, AD 10.0/12.0 cm 3 6 4 22 1 5 1 10 5 56 4 17 2 To fasten uncoate Mepla an Mapress pipes Soun insulation Threae fastening M8/M10 Galvanize Prouct Details Prouct material Ø M Steel 601.700.00.1 16-18 8 / 10 2,3 602.700.00.1 20-22 8 / 10 2,5 603.700.00.1 25-28 8 / 10 2,8 604.700.00.1 32-35 8 / 10 3,2 605.700.00.1 40-44 8 / 10 3,5 606.700.00.1 50-54 8 / 10 4 607.700.00.1 63 8 / 10 4,7 For fastening faucet connections For faucet connection ouble Galvanize Offset Prouct Details Prouct material Fastening material 601.731.00.1 Description Steel Mounting bracket, for ouble faucet connection 10cm + 12cm Mapress Catalogue 2008/2009 91

Geberit Mapress Mapress Accessories Mounting bracket, ouble, AD 7.3/15.3 cm Mounting brackets Mounting bracket flat, ouble, AD 10.0/12.0 cm 3 6 4 4 6 6 7 3 17 2 5 15 3 5 25 3 59 7 6 1 10 1 6 24 1 4 For fastening faucet connections For faucet connection ouble For fastening faucet connections For faucet connection ouble Galvanize Offset Straight, with bar Prouct Details Prouct material Steel Prouct Details Prouct material Steel Fastening material Fastening material 601.732.00.1 Description Mepla mounting bracket, for ouble faucet connection 7.3cm + 15.3cm 601.738.00.1 Description Mounting bracket flat, for ouble faucet connection 10cm + 12cm Mounting bracket flat, single Mounting bracket flat, ouble, AD 7.3/15.3 cm 4 6 6 4 6 6 6 6 12 1 4 7 3 6 15 3 6 27 3 1 4 For fastening faucet connections For faucet connection single For fastening faucet connections For faucet connection ouble Straight, with bar Straight, with bar Prouct Details Prouct material Steel Prouct Details Prouct material Steel Fastening material Fastening material Description 601.736.00.1 Mounting bracket flat, for single faucet connection 601.737.00.1 Description Mounting bracket flat, for ouble faucet connection 7.3cm + 15.3cm 92 Mapress Catalogue 2008/2009

Soun insulations Geberit Mapress Mapress Accessories Pipe bracket for trap connection Soun insulations Soun insulations Soun insulation set for elbow l B h For fastening outle bens or pipes to mounting brackets Soun insulation Galvanize Prouct Details Prouct material Fastening material Ø Steel 601.741.00.1 50-56 5,2-5,5 3,5 For soun insulation of faucet connection elbows single For faucet connectors ia. 16-20 / 1/2 Prouct Details Prouct material EPDM Soun insulation base Insulation case B h l 601.801.00.1 7 8,5 5 5,3 1,9 Soun insulation, rubber base plate For soun insulation of faucet connection with flange 0 3 Prouct Details Prouct material EPDM Description 601.802.00.1 Soun insulation, rubber base plate Soun insulation base 0 3 For soun insulation of faucet connection with flange Prouct Details Prouct material EPDM Description 601.806.00.1 Soun insulation, rubber base plate Mapress Catalogue 2008/2009 93

Geberit Mapress 94 Mapress Catalogue 2008/2009

Tools Description AFP 101 Page 96 EFP 2 Page 100 ECO 201 Page 101 Pressing tools ACO 201 Page 102 ECO 301 Page 106 ACO 3 Page 109 CPS Page 114 Overview Page 120 for AFP 101 Page 97 Accessories for EFP 2, ECO 1, ACO 1, ECO 201, ACO 201 Page 104 for ECO 301, ACO 3 Page 110 for CPS Page 115 aitional accessories Page 112 Cutting an eburring tools Pipe cutter Page 116 Pipe eburrer Page 116 Marking evice an accessories Page 117 Stripping tool for carbon steel Page 118 Plug for pressure test Page 118 Mapress Catalogue 2008/2009 95

Tools Pressing tools AFP 101 Pressing AFP 101 tools Pressing tools AFP 101 Pressing tool AFP 101 Geberit compatibility 1 Prouct Details Vibration value 2.5 m/s² Nominal force 19 kn Net weight 1.5 kg Temperature range uring operation -20 - +60 C Exclue: Pressing jaws Nominal voltage / mains frequency 241.540.00.1 9,6 V Pressing tool AFP 101, in case For pressing Mepla an Mapress pressfitting systems Geberit compatibility 1 Prouct Details Vibration value 2.5 m/s² Nominal force 19 kn Protection egree IP 20 Net weight 1.5 kg Temperature range uring operation -20 - +60 C Case Pressing evice Battery charger 2 batteries 9.6 V Spray WD-40 Nominal voltage / mains frequency Power consumption Plug type [W] 691.010.P1.3 230 V / 50-60 z 70 EN 50075 SS I 691.010.P5.3 new 230 V / 50-60 z 70 BS 1363 A 691.012.1P.3 new 115 V / 50-60 z 70 CEE 17 yellow 96 Mapress Catalogue 2008/2009

Accessories for Pressing tool AFP 101 Pressing tool AFP 101 with power supply aapter, in case Tools Pressing tools new For pressing Mepla an Mapress pressfitting systems Geberit compatibility 1 Prouct Details Vibration value 2.5 m/s² Nominal force 19 kn Protection egree IP 20 Net weight 1.5 kg Temperature range uring operation -20 - +60 C Nominal voltage 230 V AC Case Power supply aapter Pressing evice Spray WD-40 Nominal voltage / mains frequency Power consumption Plug type [W] 691.020.P2.3 230 V / 50 z 400 IEC 60884-1 SS XVII-CEE7 Accessories for Pressing tool AFP 101 Accessories for Pressing tool AFP 101 Mapress pressing jaw For pressing tools with Geberit compatibility 1 For pressing Mapress pressfittings Ø 90241 12 90242 15 90243 18 90244 22 90245 28 Mapress Catalogue 2008/2009 97

Tools Pressing tools Accessories for Pressing tool AFP 101 Pressing jaw new For pressing tools with Geberit compatibility 1 For pressing Mapress pressfittings Pressing jaws Pipe cutter Deburring tool Marker pen Insertion istance template Exclue: Case Dimensions of the inclue pressing jaws, see Ø in table Ø 691.091.00.1 15 / 18 / 22 / 28 Power supply aapter 9.6 V new Nominal voltage / mains frequency Power consumption Plug type [W] 691.009.P2.1 230 V / 50 z 400 I EC-83 / C6 691.009.P5.1 230 V / 50 z 400 BS 1363A 691.009.1P.1 110 V / 50 z 400 CEE17 yellow Battery charger 9.6 V For battery-powere pressing tools with Geberit compatibility 1 Prouct Details Operating voltage 9.6 V DC Nominal voltage / mains frequency Power consumption [W] Plug type 241.541.P1.1 230 V / 50-60 z 70 EN 50075 SS I 70 241.541.P5.1 new 230 V / 50-60 z 70 BS 1363 A 70 241.542.1P.1 115 V / 50-60 z 70 CEE 17 yellow 70 Accumulator charge time [min] 98 Mapress Catalogue 2008/2009

Accessories for Pressing tool AFP 101 Tools Pressing tools Storage battery 9.6 V For pressing tools with Geberit compatibility 1 Prouct Details Temperature range uring operation -10 - +60 C Nominal voltage / mains frequency Battery capacity [Ah] 241.543.00.1 9,6 V 3 Case for pressing tool, empty For Geberit Mepla or Geberit Mapress pressing tools compatibility 1 For equipping with pressing tool AFP 101 with batteries or power supply aapter Prouct Details Prouct material ABS Case insert Description 691.134.00.1 Case for pressing tools, 12-28, 16-40 Mapress Catalogue 2008/2009 99

Tools Pressing tools EFP 2 EFP 2 Pressing tools EFP 2 Pressing tool EFP 2 For pressing Mepla an Mapress pressfitting systems Geberit compatibility 2 Swivelling hea Prouct Details Vibration value 2.5 m/s² Nominal force 32 kn Manufacture since 1996 Protection class II Protection egree IP 20 Net weight 6.0 kg Temperature range uring operation -20 - +60 C Exclue: Pressing jaws an case Nominal voltage / mains frequency Power consumption Plug type [W] 691.100.P2.1 230 V / 50 z 560 IEC 60884-1, SS XVII-CEE7 691.102.1P.1 115 V / 50 z 560 CEE 17 yellow 691.105.5P.1 48 V / 50 z 560 CEE 50V 2P 32A 12h IP44 Pressing tool EFP 2, in case For pressing Mepla an Mapress pressfitting systems Geberit compatibility 2 Swivelling hea Prouct Details Vibration value 2.5 m/s² Nominal force 32 kn Protection class II Protection egree IP 20 Net weight 6.0 kg Temperature range uring operation -20 - +60 C 100 Mapress Catalogue 2008/2009

ECO 201 Tools Pressing tools Case Pressing evice Gearbox grease Spray WD-40 Nominal voltage / mains frequency Power consumption Plug type [W] 691.110.P2.3 230 V / 50 z 560 IEC 60884-1 SS XVII-CEE7 691.112.1P.3 115 V / 50 z 560 CEE 17 yellow ECO 201 Pressing tools ECO 201 Pressing tool ECO 201 For pressing Mepla an Mapress pressfitting systems Geberit compatibility 2 Prouct Details Noise level at user's ear 77 B(A) Protection class II Net weight 4.0 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Nominal force 32 kn Protection egree IP 20 Exclue: Pressing jaws Nominal voltage / mains frequency Power consumption Plug type [W] 690.500.P2.2 230 V / 50 z 400 IEC 60884-1, SS XVII-CEE7 690.500.P5.2 new 230 V / 50 z 400 BS 1363 A 690.502.1P.2 115 V / 50 z 400 CEE 17 yellow 690.502.2P.2 new 125 V / 60 z 400 Nema 1-15 Mapress Catalogue 2008/2009 101

Tools Pressing tools ACO 201 Pressing tool ECO 201, in case For pressing Mepla an Mapress pressfitting systems Geberit compatibility 2 Prouct Details Noise level at user's ear 77 B(A) Protection class II Net weight 4.0 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Nominal force 32 kn Protection egree IP 20 Case Pressing evice Spray WD-40 Nominal voltage / mains frequency Power consumption [W] Plug type 691.210.P2.3 230 V / 50 z 400 IEC 60884-1 SS XVII-CEE7 691.210.P5.3 new 230 V / 50 z 400 BS 1363 A 691.212.1P.3 115 V / 50 z 400 CEE 17 yellow 691.212.2P.3 new 125 V / 60 z 400 NEMA 1-15P ACO 201 Pressing tools ACO 201 Pressing tool ACO 201 For pressing Mepla an Mapress pressfitting systems Geberit compatibility 2 Prouct Details Ampere-hour capacity 2.4 Ah Net weight 3.1 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Nominal force 32 kn Protection egree IP 20 102 Mapress Catalogue 2008/2009

ACO 201 Tools Pressing tools Exclue: Accumulator Exclue: Battery charger Exclue: Pressing jaws an case Nominal voltage / mains frequency Power consumption [W] 690.506.00.2 14,4 V DC 375 Pressing tool ACO 201, in case For pressing Mepla an Mapress pressfitting systems Geberit compatibility 2 Prouct Details Net weight 3.1 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Nominal force 32 kn Protection egree IP 20 Ampere-hour capacity 2.4 Ah Case Pressing evice Battery charger 2 batteries 14.4 V Spray WD-40 Nominal voltage / mains frequency Power consumption [W] Plug type 691.215.P1.3 230 V / 50-60 z 70 EN 50075 SS I 691.215.P5.3 new 230 V / 50-60 z 70 BS 1363 A 691.217.1P.3 115 V / 50-60 z 275 CEE 17 yellow Mapress Catalogue 2008/2009 103

Tools Pressing tools Accessories for EFP 2, ECO 1, ACO 1, ECO 201, ACO 201 Accessories for EFP 2, ECO 1, ACO 1, ECO 201, ACO 201 Accessories for EFP 2, ECO 1, ACO 1, ECO 201, ACO 201 Pressing jaws Case for pressing jaws, empty For pressing tools with Geberit compatibility 2 Ø 90532 15 90533 18 90534 22 90535 28 90536 35 For max. 6 Geberit Mepla or Geberit Mapress pressing jaws with the compatibility 2 an 3 For aitional equipping with a Mapress or Mepla pipe cutter up to max. 54 or Mepla pliers 16-26 For aitional equipping with a Mepla eburring an calibration tool 16-50 or a Mapress pipe eburrer 12-54 For aitional equipping with small materials such as Spray WD 40 100 ml, insertion istance template, marker pen, twometer ruler, etc. Prouct Details Pressing jaws set new Prouct material Case insert ABS Description 691.137.00.1 Case for pressing jaws, 12-35, 16-50 For pressing Mapress pressfittings For pressing tools with Geberit compatibility 2 Pressing jaws Pipe cutter Deburring tool Marker pen Insertion istance template Exclue: Case Dimensions of the inclue pressing jaws, see Ø in table Ø 691.292.00.1 15 / 18 / 22 / 28 / 35 Case for pressing collars, empty For 3 Geberit Mapress pressing collars ø 35-66.7 mm For aitional equipping with an aapter for pressing collar, a pipe cutter up to max. 54 an a pipe eburrer 12-54 Prouct Details Prouct material ABS Case insert Description 691.138.00.1 Case for Mapress pressing collars, 35-54, 42-66.7 104 Mapress Catalogue 2008/2009

Accessories for EFP 2, ECO 1, ACO 1, ECO 201, ACO 201 Tools Pressing tools Pressing collars set 42 an 54 Gearbox grease Description 90010 Grease for gear For pressing tools with Geberit compatibility 2 For pressing Mapress pressfittings Case Mapress pressing collars Aapter B201 for pressing collars Mapress Insertion istance template Marker pen Spray WD-40 Dimensions of the inclue pressing collars, see Ø in table Ø 691.296.00.1 42 / 54 Pressing collars 42 an 54 For pressing tools with Geberit compatibility 2 an 3 Ø 90539 42 90540 54 Mapress aapter B201 for pressing collars 42 an 54 For pressing tools with Geberit compatibility 2 Description 90541 Mapress aapter B201 for pressing collars 42-54 Mapress Catalogue 2008/2009 105

Tools Pressing tools Pressing tools/collars ECO 301 Pressing tools/collars ECO 301 Pressing tools ECO 301 Pressing tool ECO 301 For pressing Mapress pressfitting systems Geberit compatibility 3 Prouct Details Protection class II Nominal force 45 kn Mains frequency 50-60 z Power input 560 W Protection egree IP 20 Nominal voltage 230 V AC Net weight 5.0 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Exclue: Pressing jaws Nominal voltage / mains frequency Power consumption Plug type [W] 691.300.P2.2 230 V / 50 z 560 IEC 60884-1 SS XVII-CEE7 691.300.P5.2 new 230 V / 50 z 560 BS 1363 A 691.302.1P.2 115 V / 50 z 560 CEE 17 yellow 691.302.2P.2 new 125 V / 60 z 560 NEMA 1-15 Pressing tool ECO 301, in case For pressing Mapress pressfitting systems Geberit compatibility 3 106 Mapress Catalogue 2008/2009

Pressing collars for ECO 301 Tools Pressing tools Prouct Details Protection class II Nominal force 45 kn Protection egree IP 20 Net weight 5.0 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Case Pressing evice Spray WD-40 Nominal voltage / mains frequency Power consumption Plug type [W] 691.310.P2.3 230 V / 50 z 560 IEC 60884-1 SS XVII-CEE7 691.310.P5.3 new 230 V / 50 z 560 BS 1363 A 691.312.1P.3 115 V / 50 z 560 CEE 17 yellow 691.312.2P.3 new 125 V / 60 z 560 NEMA 1-15P Pressing collars for ECO 301 Pressing collars for ECO 301 Pressing collars set 76.1 an 88.9 For pressing tools with Geberit compatibility 3 For pressing Mapress pressfittings For pressing tool ECO 301 Not suitable for use with pressing evice ACO 3 Case Mapress pressing collars Aapter B321 for Mapress pressing collars Insertion istance template Marker pen Spray WD-40 Dimensions of the inclue pressing collars, see Ø in table Ø 691.398.00.1 76,1 / 88,9 Mapress Catalogue 2008/2009 107

Tools Pressing tools Pressing collars for ECO 301 Pressing collar set 108 Case, empty For pressing tools with Geberit compatibility 3 For pressing Mapress pressfittings For pressing tool ECO 301 Not suitable for use with pressing evice ACO 3 Case Mapress pressing collar ia. 108 Aapter B322 for Mapress collar Insertion istance template Marker pen Spray WD-40 The aapter B321 for pressing collar is inclue in the Mapress pressing collars set 76.1 / 88.9 For Geberit Mapress pressing collars ø 76.1 / 88.9 mm For aitional equipping with an aapter for pressing collar an pipe cutter up to max. 108 Prouct Details Prouct material Case insert ABS Description 691.139.00.1 Case for Mapress pressing collars, 76.1-88.9 Ø 691.399.00.1 108 Aapter B322 for pressing collar 108 Pressing collars For pressing tools with Geberit compatibility 3 For final pressing ø 108 mm For pressing tools with Geberit compatibility 3 Ø 90671 76,1 90672 88,9 90673 108 Description 90675 Mapress aapter B322 for pressing collar 108 Case, empty Aapter B321 for pressing collars 76.1 an 88.9 For Geberit Mapress pressing collar ø 108 mm For aitional equipping with two aapters for pressing collars an a pipe cutter up to max. 108 For pressing tools with Geberit compatibility 3 For preliminary pressing ø 108 mm Description 90674 Mapress aapter B321 for pressing collars 76.1-88.9 Prouct Details Prouct material ABS Case insert Description 691.140.00.1 Case for Mapress pressing collar, 108 108 Mapress Catalogue 2008/2009

ACO 3 Tools Pressing tools ACO 3 Pressing tools ACO 3 Pressing tool ACO 3 For pressing Mapress pipe systems up to 54 mm Geberit compatibility 3 Prouct Details Nominal force 36 kn Ampere-hour capacity 2 Ah Nominal voltage 12 V DC Net weight 4.2 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Exclue: Accumulator Exclue: Battery charger Exclue: Pressing jaws an case Nominal voltage / mains frequency Power consumption [W] 691.303.00.1 12 V DC 270 Mapress Catalogue 2008/2009 109

Tools Pressing tools Accessories for ECO 301, ACO 3 Pressing tool ACO3, in case For pressing Mapress pipe systems up to 54 mm Geberit compatibility 3 Prouct Details Nominal force 36 kn Ampere-hour capacity 2 Ah Net weight 4.2 kg Temperature range uring operation -20 - +60 C Vibration value 2.5 m/s² Case Pressing evice Battery charger 2 batteries, 12 V Spray WD-40 Nominal voltage / mains frequency Power consumption Plug type [W] 691.340.P1.3 230 V / 50-60 z 70 EN 50075 SS I 691.340.P5.3 new 230 V / 50-60 z 70 BS 1363 A 691.342.1P.3 115 V / 50-60 z 275 CEE 17 yellow Accessories for ECO 301, ACO 3 Accessories for ECO 301, ACO 3 Pressing jaws Mapress For pressing tools with Geberit compatibility 3 Ø 90642 15 90643 18 90644 22 90645 28 90646 35 110 Mapress Catalogue 2008/2009

Accessories for ECO 301, ACO 3 Tools Pressing tools Pressing jaws set For pressing Mapress pressfittings For pressing tools with Geberit compatibility 3 Pressing jaws Pipe cutter Deburring tool Marker pen Insertion istance template Exclue: Case Dimensions of the inclue pressing jaws, see Ø in table Ø 691.392.00.1 15 / 18 / 22 / 28 / 35 Pressing collars set 42 an 54 For pressing tools with Geberit compatibility 3 For pressing Mapress pressfittings For pressing tools ECO 301 an ACO 3 Case with case inserts for max. 3 pressing collars 35-66.7 Mapress pressing collars Mapress aaptor B 302 for pressing collars Insertion istance template Marker pen Spray WD-40 Dimensions of the inclue pressing collars, see Ø in table Ø 691.396.00.1 42 / 54 Mapress Catalogue 2008/2009 111

Tools Pressing tools Accessories Aapter B302 for pressing collars 35-54 For pressing tools with Geberit compatibility 3 Description 90668 Mapress aapter B302 for pressing collars 42-54 Accessories Accessories Charger for accumulator For battery-powere pressing tools with Geberit compatibility 2 an 3 Prouct Details Accumulator charge time Power output Operating voltage 60-80 min 1.8 A 12 / 14.4 V DC Battery charger 12 V / 14.4 V oes not fit into case for ACO 1 pressing tool with Mepla pressing jaws, supplie prior to 2006. A new case insert 240.668.00.1 is require. Nominal voltage / mains frequency Power consumption Plug type [W] 690.591.P1.1 230 V / 50-60 z 70 EN 50075, SS I 690.591.P5.1 new 230 V / 50-60 z 70 BS 1363 A 690.594.1P.1 115 V / 50-60 z 275 CEE 17 yellow Spare accumulator for pressing tool 12 V DC, 2 Ah For pressing tools ACO 1 an ACO 3 Prouct Details Operating voltage 12 V DC Temperature range uring operation -10 - +60 C Ampere-hour capacity 2 Ah Description 690.593.00.1 Accumulator 12 V DC, 2 Ah 112 Mapress Catalogue 2008/2009

Accessories Tools Pressing tools Spare accumulator for pressing tool 14.4 V DC, 2.4 Ah For pressing tools ACO 201 Prouct Details Temperature range uring operation -10 - +60 C Ampere-hour capacity 2.4 Ah Nominal voltage / mains frequency 690.597.00.1 14,4 V DC Case for pressing tool, empty For Geberit Mepla or Geberit Mapress pressing tools compatibility 2 an 3 For equipping with pressing tools EFP 2, ECO 201 or ECO 301 Prouct Details Prouct material Case insert Description ABS 691.135.00.1 Case for electrical pressing tools, 12-35, 16-50 Case for pressing tool, empty For Geberit Mepla or Geberit Mapress battery-operate pressing tools compatibility 2 an 3 For equipping with pressing tools ACO 201 or ACO 3 Prouct Details Prouct material Case insert Description ABS 691.136.00.1 Case for battery-operate pressing tools, 12-35, 16-50 Mapress Catalogue 2008/2009 113

Tools Pressing tools CPS CPS Pressing tools CPS yraulic power pack CPS, complete Prouct Details Protection class I Protection egree IP 44 Operating pressure max. 180 bar Vibration value 2.5 m/s² Nominal force 190 kn Temperature range uring operation -20 - +60 C Net weight 110 kg Trolley yraulic cylinre yraulic extension hose 5 m Assembly clamp Pressing collars ia. 76,1-108 mm Case Ø Nominal voltage / mains Power consumption Plug type frequency [W] 691.420.P0.1 76,1 / 88,9 / 108 230 V / 50 z 800 IEC 60884-1, SS VII-CEE7 691.422.1P.1 76,1 / 88,9 / 108 115 V / 50 z 800 CEE 17 yellow yraulic power pack A5 Prouct Details Protection class I Protection egree IP 44 Net weight 16 kg Operating pressure max. 180 bar Vibration value 2.5 m/s² Nominal force 190 kn Temperature range uring operation -20 - +60 C Net weight 16 kg Nominal voltage / mains frequency Power consumption Plug type [W] 691.400.P0.1 230 V / 50 z 800 IEC 60884-1, SS VII-CEE7 691.402.1P.1 115 V / 50 z 800 CEE 17 yellow 691.405.5P.1 new 48 V / 50 z 800 CEE 50V 2P 32A 12h IP44 114 Mapress Catalogue 2008/2009

Accessories for CPS Tools Pressing tools Accessories for CPS Accessories for CPS Pressing collars yraulic oil PANOIN P 9632 For pressing tool CPS Ø 90570 76,1 90571 88,9 90572 108 yraulic cyliner For pressing tool CPS Syntetic hyraulic oil with high performance Viscosity inex VI 246 Prouct Details Temperature range uring operation -20 - +60 C Canister of 5 liter Description 90011 yraulic oil Assembly clamp Prouct Details Net weight 14.2 kg Description 90560 Mapress pressing cyliner CP Trolley Ø 90563 54-108 Case empty for pressing collars Prouct Details Net weight 35 kg Description 90561 Trolley Description 90564 Case empty for Mapress hyraulic power pack CPS Mapress Catalogue 2008/2009 115

Tools Cutting tools an accessories Pipe cutter / Pipe eburrer yraulic extension hose Rohrentgratwerkzeuge <Metallrohre> Pipe eburrer Electrical pipe eburrer, in case For pressing tool CPS Control line, 5 m yraulic hose, 5 m Description (m) [m] 90562 yraulic extension hose 5 Cutting Pipe cutter tools / Pipe an accessories eburrer Pipe cutter Pipe cutter For cutting Mapress Stainless Steel, Carbon Steel an MapressCuNiFe pipes Ø 91084 12-28 91086 12-54 For internal an external eburring of the pipe ens of Mapress stainless steel an carbon steel system pipes, as well as copper pipes with imensions ø 15-108 mm Prouct Details Protection class II Protection egree IP 20 Temperature range uring operation -20 - +60 C Case Electrical pipe eburrer with eburrer hea Protective goggles 2 open-ene spanners Nominal voltage / mains frequency Power consumption [W] Plug type 691.000.P2.3 230 V / 50 z 500 IEC 60884-1 SS XVII-CEE7 691.000.P5.3 new 230 V / 50 z 500 BS 1363 A 691.002.1P.3 115 V / 50 z 500 CEE 17 yellow Cutting wheel Deburrer hea For pipe cutter ø 12-28 mm an ø 12-54 mm Cutting wheel Sprea ring Ø 91090 12-42 91091 12-54 Description 90364 Deburrer hea Milling cutter Pipe eburrer Description 90365 Milling cutter 116 Mapress Catalogue 2008/2009

Marking evice an accessories Protective goggles Marking evice an accessories Marking evice an accessories Tools Cutting tools an accessories Device for marking insertion istance Description 90366 Protective goggles Universal case For marking the insertion istance for Mapress system pipes Marker pen Allen key For equipping with electrical pipe eburrer for example Universal case with 3 compartments Prouct Details Prouct material Case insert Description 691.141.00.1 Universal case ABS Ø 90360 12-108 Insertion istance template For marking the insertion istance for Mapress system pipes Ø 90359 12-54 Pipe eburrer Insertion istance template For internal an external eburring of the pipe ens of Mapress stainless steel an carbon steel system pipes, as well as copper pipes with imensions ø 12-54 mm Ø 90363 12-54 For marking the insertion istance for Mapress system pipes Ø 90351 12-108 Mapress Catalogue 2008/2009 117

Tools Plugs Marker pen Stripping tool for carbon steel / Plug for pressure test Blae for stripping tool for carbon steel For Mapress marking evice Description 90358 Marker pen Ø 90391 12-18 90394 22-28 90396 35-54 Stripping tool for carbon steel / Plug for pressure test Stripping tool for carbon steel Stripping tool for carbon steel Plugs for pressure test Plug for pressure test Plug for pressure test for fitting For eburring Mapress carbon steel system pipes an for correctly removing the plastic coating own to the insertion istance of Mapress pressfittings Ø 90372 15 90373 18 90374 22 90375 28 Stripping tool for carbon steel ia. 35-54 mm For eburring Mapress carbon steel system pipes an for correctly removing the plastic coating own to the insertion istance of Mapress pressfittings For temporary sealing of Mapress fittings uring pressure test For pressure test with col water with max. 22,5 bar Not suitable for gas installations With air blee Can be reuse Seal rings Ø 90922 15 90923 18 90924 22 90925 28 90926 35 90927 42 90928 54 90929 76,1 90930 88,9 90931 108 Ø 90376 35-54 118 Mapress Catalogue 2008/2009

Plug for pressure test Tools Plugs Seal ring set for plug for pressure test For Mapress plug for pressure test for fitting Prouct Details Prouct material NBR Seal ring NBR plug for pressure test Seal ring NBR bleeer screw Ø 90341 15 90342 18 90343 22 90344 28 90345 35 90346 42 90347 54 90348 76,1 90349 88,9 90350 108 Aerosol WD-40 new Content 100 ml Description 90000 Aerosol WD-40 Mapress Catalogue 2008/2009 119

Tools Mapress Pressing tools overview Mapress Pressing tools overview Overview Mapress Pressing tools overview Compatibility Art.No. Accessories 1 241.540.00.1 Pressing tool AFP 101 241.541.P1.1 Charger 9.6 V - 230 V / 50-60 z 241.541.P5.1 Charger 9.6 V - 230 V / 50-60 z 241.542.1P.1 Charger 9.6 V - 115 V / 50-60 z 241.543.00.1 Accumulator 9.6 V 691.009.P2.1 Power supply aapter 9.6 V - 230 V / 50 z 691.009.P5.1 Power supply aapter 9.6 V - 230 V / 50 z 691.009.1P.1 Power supply aapter 9.6 V - 110 V / 50 z 691.134.00.1 Case, empty 90242 Pressing jaws 15 90243 Pressing jaws 18 90244 Pressing jaws 22 90245 Pressing jaws 28 691.100.P2.1 Pressing tool EFP 2-230 V / 50 z 691.102.1P.1 Pressing tool EFP 2-115 V / 50 z 691.105.5P.1 Pressing tool EFP 2-48 V / 50 z 2 690.500.P2.2 Pressing tool ECO 201-230 V / 50 z 690.500.P5.2 Pressing tool ECO 201-230 V / 50 z 690.502.1P.2 Pressing tool ECO 201-115 V / 50 z 690.502.2P.2 Pressing tool ECO 201-125 V / 60 z 690.506.00.2 Pressing tool ACO 201 691.135.00.1 Case, empty 690.591.P1.1 Charger 12 V / 14.4 V - 230 V / 50-60 z 690.591.P5.1 Charger 12 V / 14.4 V - 230 V / 50-60 z 690.594.1P.1 Charger 12 V / 14.4 V - 115 V / 50-60 z 690.597.00.1 Accumulator 14.4 V 691.136.00.1 Case, empty 90532 Pressing jaws 15 90533 Pressing jaws 18 90534 Pressing jaws 22 90535 Pressing jaws 28 90536 Pressing jaws 35 90541 Aapter B 201 90539 Collar 42 90540 Collar 54 691.138.00.1 Case, empty 3 691.300.P2.2 Pressing tool ECO 301-230 V / 50 z 691.300.P5.2 Pressing tool ECO 301-230 V / 50 z 691.302.1P.2 Pressing tool ECO 301-115 V / 50 z 691.302.2P.2 Pressing tool ECO 301-125 V / 60 z 691.135.00.1 Case, empty 90642 Pressing jaws 15 90643 Pressing jaws 18 90644 Pressing jaws 22 90645 Pressing jaws 28 90646 Pressing jaws 35 90668 Aapter B 302 90539 Collar 42 90540 Collar 54 691.138.00.1 Case, empty 90674 Aapter B 321 90671 Collar 76.1 90672 Collar 88.9 691.139.00.1 Case, empty 90675 Aapter B 322 90673 Collar 108 691.140.00.1 Case, empty 120 Mapress Catalogue 2008/2009

Tools Mapress Pressing tools overview Mapress Pressing tools overview Compatibility Art.No. Accessories 3 Pressing unit CPS 691.303.00.1 Pressing tool ACO 3 691.400.P0.1 yraulic power pack A5-230 V / 50 z 691.402.1P.1 yraulic power pack A5 115 V / 50 z 691.405.5P.1 yraulic power pack A5 48 V / 50 z 690.591.P1.1 Charger 12 V / 14.4 V - 230 V, 50-60 z 690.591.P5.1 Charger 12 V / 14.4 V - 230 V, 50-60 z 690.594.1P.1 Charger 12 V / 14.4 V - 115 V, 50-60 z 690.593.00.1 Accumulator 12 V 691.136.00.1 Case, empty 90560 yraulic cyliner CP 90561 Trolley 90563 Assembly clamp M 1 90564 Case, empty 90562 yraulic extension hose 90011 yraulic oel PANOIN P 9632 90642 Pressing jaws 15 90643 Pressing jaws 18 90644 Pressing jaws 22 90645 Pressing jaws 28 90646 Pressing jaws 35 90668 Aapter B 302 90539 Collar 42 90540 Collar 54 691.138.00.1 Case, empty 90570 Collar 76.1 90571 Collar 88.9 90572 Collar 108 Mapress Catalogue 2008/2009 121

Tools 122 Mapress Catalogue 2008/2009

Appenix Description General Page 124 Conclusion of Contract - Written form Page 124 Conitions of Delivery - Transfer of Risks Page 124 Delivery Perio, Delays in Delivery, Partial Delivery Page 124 Prices, Payment, Default Page 124 Delay in Calling Goos Page 124 International sales an elivery conitions Packaging Page 124 Defective Goos (Warranty) Page 125 iability of Geberit Page 125 Retention of Title, Securities Page 125 Re-export Page 125 Prohibition of Assignment an Offsetting Page 126 Place of Preformance, Jurisiction an Applicable aw Page 126 Severability Page 126 Inex Page 127 Mapress Catalogue 2008/2009 123

Appenix International sales an elivery conitions International sales an elivery conitions International sales an elivery conitions (vali from 1st of April 2008) 1. General 1.1 All sales, eliveries an services of the Geberit International Sales AG (hereinafter referre to as "Geberit") are effecte exclusively on the basis of the following International Sales an Delivery Conitions. General terms an conitions of the buyer are hereby contraicte. They are also not accepte in case Geberit oes not expressly contraict them again after their receipt. These International Sales an Delivery Conitions are consiere to have been accepte by the buyer at the latest with the acceptance of the elivere goos. 1.2 All contracts, orers an agreements - particularly those purporting to change the conitions set out herein - shall only become bining if expressly accepte by Geberit in writing. 2. Conclusion of Contract - Written form 2.1 The offers of Geberit are non-bining, unless otherwise agree in writing. 2.2 An orer is only accepte by Geberit when it has been confirme in writing an the orer confirmation has been sent to the buyer. 2.3 All agreements, eclarations an other information are require to be in writing if they are to be vali 3. Conitions of Delivery - Transfer of Risks 3.1 The elivery of goos shall be mae "Free Carrier" Geberit's respective work or warehouse (FCA - INCOTERMS 2000) unless otherwise agree an state on the orer confirmation. 3.2 Geberit's prices shall be unerstoo as net prices without tax or customs uty. Any taxes, uties, charges, etc. impose in connection with the sale, elivery, import or export of the goos must be borne by the buyer. 3.3 The buyer shall be liable to provie Geberit in ue time with all information necessary for Geberit to fulfil its obligations with respect to tax an customs uty. In particular the buyer shall be liable for proviing Geberit with a qualifie export ocumentation (e.g. original certificate of export) an/or its correct VAT ID- Number. In case the buyer oes not fulfil his obligation to supply all necessary information to Geberit the buyer shall be liable for all claims an amages arising for Geberit out of this efault of contract, in particular taxes (VAT, GST, sales tax or similar turnover epenent taxes), customs uty, interest, any aministrative cost (e.g. legal an consulting expenses) an penalties. 3.4 The risk of loss - incluing acciental loss - or acciental eterioration of the goos is transferre to the buyer when the goos are hane over to the commissione freight-forwarer or carrier but no later than the time of leaving the respective work or warehouse of Geberit, unless otherwise provie for in the corresponing orer confirmation. 3.5 Delivery of goos notifie as reay for ispatch must be requeste immeiately, otherwise at its own iscretion Geberit shall be entitle to store them at the expense an risk of the buyer an invoice them as elivere ex works. If espatch is elaye for reasons for which Geberit is not responsible, then instea of the point in time accoring to Section 3.3 the particular ate of inication of reainess for espatch applies. 3.6 Geberit may arrange, upon buyer's request, for insurance at buyer's cost against amage arising in connection with the storage, elivery or shipment of goos orere by buyer. 4.3 In the event of the occurrence of unforeseeable or inevitable events (force majeure) an in the case of operational stoppages of any kin, in particular amage to machinery, strikes an employment isputes, elaye supplies to us of important operating meia an input materials or aministrative measures, Geberit is entitle to withraw from the contract of sale either wholly or in part or to exten the elivery perio appropriately, taking into consieration a start-up perio. Geberit shall inform the buyer about any such event in writing. 4.4 In cases of elay of elivery the buyer can, following the abortive expiry of an appropriate final ealine, withraw from the contract; in cases where the performance is impossible, he has this right even without the setting of a final ealine. All claims of the buyer for compensation for amages resulting from a elay of elivery, incluing but not limite to any consequential amages, are - with reservation of the regulation in the following section 4.5 - exclue; the same applies to the buyer's claim for the reimbursement of expenses. 4.5 The exclusion of liability regulate in section 4.4 oes not apply in the case of amages cause by wilful intent or gross negligence on Geberit's part. Subject to manatory law in other cases Geberit's liability is limite to the contractually typical, foreseeable amages not exceeing the amount of the respective orer. 4.6 Unless otherwise agree in writing, Geberit is entitle to make partial eliveries. 5. Prices, Payment, Default 5.1 Geberit's prices are base on the repective price lists vali at the ate of the orer confirmation. 5.2 Unless other creit terms have been agree between Geberit an the buyer, goos must be pai for immeiately after the receipt of the orer confirmation an before elivery. 5.3 If any payment is overue, interest on the outstaning sum is payable at commercial bank rates but not less than 6 percent p.a. 5.4 Bills of exchange an cheques are accepte by Geberit only on account of performance an not as performance. Payments mae by bills of exchange or cheques o not constitute fulfilment until the amount in question has been irrevocably creite to Geberit's bank account. Taxes an expenses for bills of exchange are borne exclusively by the buyer. 5.5 In the case of buyer's payment efault, insolvency or the ebts being jeoparise through eterioration of the buyer's creitworthiness Geberit shall be entitle to eman immeiate settlement of all ebts falling ue at the time an in the future or the provision of securities. Geberit shall also be entitle to only make outstaning eliveries if they are pai for in avance or sufficient securities are provie. If this cannot be establishe by buyer within a reasonable perio of time, Geberit may withraw from the contract of sale. 6. Delay in Calling Goos If the specifie quantities of goos orere by buyer are not calle for elivery within the agree timeframe, Geberit is entitle to withraw from the sale with immeiate effect, an/or to ajust the prices accoringly. Buyer is prohibite from claiming any amages. 7. Packaging Unless otherwise agree the goos shall be elivere in stanar packaging. The buyer will be charge for any special packaging agree. 4. Delivery Perio, Delays in Delivery, Partial Delivery 4.1 The state elivery perio is non-bining, unless it is specifically agree in writing to be bining. 4.2 The elivery perio begins with the sening of the orer confirmation to the buyer. It has been met when, by its expiry, the object of the elivery has left Geberit's particular works or the buyer has been informe of the orer's reainess for ispatch. 124 Mapress Catalogue 2008/2009

Appenix International sales an elivery conitions 8. Defective Goos (Warranty) 8.1 Buyer must inspect the goos immeiately upon receipt. Any efects recognisable in the course of a customary examination must be notifie to Geberit in writing within eight (8) ays after receipt. Otherwise, the goos purchase are eeme to have been accepte an any efect claims against Geberit are exclue. 8.2 To the extent there are efects involve which were not recognisable in the course of a customary examination, written notification of such efects must be given immeiately upon their iscovery. Otherwise, the goos purchase are eeme to have been accepte with respect to such efects an any efect claims against Geberit are exclue. 8.3 Buyer unertakes to make the efective goos or the efective part of the goos available to Geberit for a reasonable time immeiately after iscovery of the efect, in unaltere conition, so that the efect can be checke. This obligation oes not however release the buyer from his buren of proof of the presence of a efect. 8.4 Provie the goos, that have been professionally an uly store, maintaine an use by the buyer, are proven efective an buyer has notifie the efects as set out hereinabove, Geberit at its own choice shall be entitle to subsequently fulfil its obligations by repairing the efective goos or by supplying replacements free of cost. Shoul one or both of these types of subsequent fulfilment be impossible or not reasonable, Geberit is entitle to ecline them. Geberit can also ecline subsequent fulfilment for as long as the buyer oes not fulfil his payment obligations. 8.5 Shoul the subsequent fulfilment accoring to section 8.4 be ecline by Geberit or not have been successful, the buyer has the choice either of emaning a corresponing reuction of the purchase price (price reuction) or of withrawing from the contract in accorance with the legal regulations (withrawal). 8.6 Defect claims are subject to a perio of limitation of one (1) year after elivery of the goos to the buyer an no more than fifteen months after notification of reainess for ispatch. 8.7 Defect claims are conitione upon buyer's prior performance of any an all of buyer's own obligations. 8.8 Any claims base on efects of the goos are subject to the limitations of liability name in section 9. 8.9 The above provisions apply corresponingly if other goos or smaller quantities are elivere instea of those agree. 9. iability of Geberit 9.1 Unless otherwise specifie, any claims of the buyer against Geberit for whatever legal reason, in particular claims arising from infringement of principal an subsiiary contractual obligations, the reimbursement of expenses or tort are exclue. The exclusion in particular inclues claims for amages other than to the purchase goos, claims for loss of profit an claims which o not result from a efect of the elivere goos. 9.2 The exclusion of liability in section 9.1 oes not apply for amages resulting from culpable injury of life, boy or health, from wilful intent or gross negligence. It also oes not apply in cases where manatory liability exists in accorance with prouct-liability laws for proucts supplie for private use. 9.3 Subject to manatory law in other cases as sai in section 9.2 Geberit's liability is limite to the contractually typical, foreseeable amages not exceeing the amount of the respective orer. 9.4 Insofar as liability is exclue or limite for Geberit, this also applies for its representatives, employees, subcontractors an commercial agents. 10. Retention of Title, Securities 10.1 Geberit shall retain ownership of the goos supplie until full payment of the corresponing purchase price an the fulfilment of all other outstaning ebts owe by the buyer to Geberit has been effecte (hereinafter "Retaine Goos"). Buyer shall take all necessary measures for the protection of the ownership rights of Geberit. 10.2 The buyer processes the Retaine Goos for Geberit as manufacturer but without any obligation on the latter's part. The processe Goos are still eeme to be Retaine Goos. 10.3 Shoul the buyer process, combine an mix the Retaine Goos with other goos Geberit shall become part owner of the new prouct in the proportion of the invoice value of the Retaine Goos to the invoice value of the other goos use. Shoul Geberit's ownership cease as a result of combination or mixing the buyer hereby agrees to transfer its ownership of the new prouct in the amount of the invoice value of the Retaine Goos to Geberit. Geberit's part ownership shall be eeme to be Retaine Goos. 10.4 The buyer is only entitle to resell the Retaine Goos in the normal course of business an subject to his normal terms an conitions. 10.5 At the time of the conclusion of the sales contract with Geberit, the buyer assigns to Geberit all claims which base / will base on the resale of the Retaine Goos. The assigne claims shall be eeme to be security for the Retaine Goos. The buyer shall not be entitle to otherwise assign the claims. Insofar as a continuous account relationship is agree between the buyer an his customers, the assignment refers to the balance at the time. The buyer is still entitle to collect these resale claims from his customers or thir parties after they have been assigne; Geberits' authority to collect the claims remains unaffecte by this. Geberit is entitle to request that the buyer informs Geberit about the assigne claims an their ebtors, gives Geberit all information in writing which is necessary for collection, surreners to Geberit the relevant ocuments an informs the ebtors in writing about the assignment of the claims. owever, Geberit oes not unertake to collect the claims or requests the abovementione information as long as the cases specifie in section 5.5 o not occur. 10.6 In the cases specifie in section 5.5 an if the buyer fails to meet the obligations of section 10.4. Geberit shall also be entitle to forbi the processing an the resale of the Retaine Goos with immeiate effect. A eclaration of withrawal from the contract by Geberit is also eeme to be a withrawal of the authorisation to resell an to collect the resale claims. In these cases Geberit shall also be entitle to eman the immeiate return of the Retaine Goos at the expense of the buyer an with exclusion of a right of retention. In the abovementione cases the buyer hereby authorises Geberit or its agent presenting written authorisation to enter its business premises on foot or in vehicles in orer to repossess the Retaine Goos. 10.7 To the extent that retention of title cannot be agree with the buyer in accorance with the applicable law, a lien on the goos or on the processe goos or on the purchase price claims of the buyer resulting from the resale of the goos shall be eeme to be agree. A lien means that the goos serve as a security for Geberit until the purchase price is pai completely an that the buyer is therefore entitle to process or resell the goos only with the agreement of Geberit. 10.8 If the value of the securities ue to Geberit excees the claims to be secure by more than 20% Geberit is oblige, on request of the buyer, to release the securities of Geberit's choice which excee the above-mentione excess cover. 11. Re-export 11.1 Geberit explicitly raws attention to the fact that Geberit proucts are protecte by various intellectual property rights in other countries. Buyer has therefore to seek avice from Geberit prior to planne exports. 11.2 The onwar elivery of the goos an any prouct ocumentation, incluing but not limite to the prouct escriptions an the installation guielines, to the USA or Canaa is expressly prohibite an requires the prior written permission of Geberit. Mapress Catalogue 2008/2009 125

Appenix International sales an elivery conitions 12. Prohibition of Assignment an Offsetting 12.1 The buyer shall only be entitle to assign rights an ebts arising from contracts of sale to thir parties with the prior agreement of Geberit. 12.2 The buyer is not entitle to offset counter-claims against the purchase price claim, unless in the case of an unispute or legally establishe claim. 12.3 The buyer is not entitle to retain the purchase price on the basis of any counter-claims which o not result from the elivery contract concerne. 13. Place of Performance, Jurisiction an Applicable aw 13.1 Place of performance for all obligations resulting from the sales contract shall be the principal place of business of Geberit in Jona, Switzerlan. 13.2 Place of jurisiction for any ispute arising in connection with the contract of sale shall be the responsible court for the principal place of business of Geberit in Jona, Switzerlan. Optionally Geberit can also conuct any court proceeings at the court responsible for the principal place of business of the buyer. 13.3 The sales contract is subject to the laws of Switzerlan. The application of the UN Convention for the International Sale of Goos ("Vienna Sales Convention") is expressly exclue. 14. Severability 14.1 The invaliity or unenforceability of any provisions of the conitions above shall not affect the valiity or enforceability of any other provision of these conitions. 126 Mapress Catalogue 2008/2009

Inex Article No. Page 12412 54 12413 54 12414 54 12415 54 12416 54 12417 54 12418 54 12419 54 12420 54 12421 54 19202 53 19203 53 19204 53 19205 53 19206 53 19207 53 19208 53 19454 53 19455 53 19456 53 19457 53 19458 53 19459 53 19460 53 19461 53 20102 55 20103 55 20104 55 20105 55 20109 55 20110 55 20111 55 20212 71 20213 71 20214 71 20215 71 20216 71 20217 71 20218 71 20219 71 20220 71 20221 71 20302 55 20303 55 20304 55 20305 55 20309 55 20310 55 20311 55 20402 56 20403 56 20404 56 20405 56 20406 56 20407 56 20408 56 Article No. Page 20502 64 20503 64 20505 64 20507 64 20508 64 20552 64 20553 64 20555 64 20557 64 20558 64 20559 64 20560 64 20561 64 20562 64 20602 55 20603 55 20604 55 20605 55 20609 55 20610 55 20611 55 20702 56 20703 56 20704 56 20705 56 20709 56 20710 56 20711 56 20802 56 20803 56 20804 56 20805 56 21002 57 21003 57 21004 57 21005 57 21006 57 21007 57 21008 57 21009 57 21010 57 21011 57 21103 58 21104 58 21105 58 21107 58 21204 58 21206 58 21207 58 21209 58 21210 58 21211 58 21212 58 21213 58 21214 58 21215 58 Article No. Page 21216 58 21217 58 21218 58 21219 58 21220 58 21221 58 21222 58 21223 58 21224 58 21225 58 21226 58 21230 58 21231 58 21232 58 21233 58 21237 59 21238 59 21239 59 21240 59 21241 59 21245 59 21246 59 21247 59 21248 59 21249 59 21250 59 21304 61 21305 61 21307 61 21308 61 21309 61 21310 61 21312 61 21313 61 21316 61 21317 61 21320 61 21321 61 21326 61 21331 61 21336 61 21404 60 21406 60 21409 60 21504 59 21505 59 21506 59 21507 59 21509 59 21510 59 21512 59 21602 63 21603 63 21605 63 21608 63 21609 63 Article No. Page 21610 63 21659 64 21660 64 21661 64 21662 64 21702 62 21703 62 21704 62 21705 62 21707 62 21708 62 21709 62 21710 62 21711 62 21713 62 21714 62 21715 62 21717 62 21720 62 21724 62 21725 62 21727 62 21802 63 21803 63 21804 63 21805 63 21806 63 21807 63 21808 63 21809 63 21810 63 21811 63 21814 63 21818 63 21823 63 21824 63 21827 63 21902 63 21903 63 21904 63 21905 63 21906 63 21908 63 21932 62 21933 62 21934 62 21935 62 21936 62 21937 62 21938 62 21939 62 21940 62 22002 54 22003 54 22004 54 22005 54 Mapress Catalogue 2008/2009 127

Inex Article No. Page 22006 54 22007 54 22008 54 22009 54 22010 54 22011 54 22102 54 22103 54 22104 54 22105 54 22106 54 22107 54 22108 54 22109 54 22110 54 22111 54 22303 57 22305 57 22306 57 22307 57 22308 57 22309 57 22310 57 22311 57 22312 57 22313 57 22315 57 22316 57 22317 57 22318 57 22320 57 22321 57 22322 57 22323 57 22324 57 22330 57 22331 57 22338 57 22339 57 22345 57 22346 57 22348 57 22412 65 22413 65 22414 65 22415 65 22416 65 22417 65 22418 65 23106 55 23107 55 23108 55 23306 55 23307 55 23308 55 23509 64 Article No. Page 23510 64 23511 64 23602 71 23603 71 23604 71 23606 55 23607 55 23608 55 23694 67 23695 67 23696 67 23697 67 23698 67 23706 56 23707 56 23708 56 23709 67 23710 67 23711 67 23722 68 23723 68 23724 68 23725 68 23726 68 23727 68 23728 68 23729 68 23732 69 23733 69 23734 69 23735 69 23736 69 23737 69 23738 69 23739 69 23922 70 23923 70 23924 70 23925 70 23926 70 23927 70 23928 70 23929 70 23930 70 23931 70 24002 71 24003 71 24004 71 24022 72 24023 72 24024 72 24032 73 25032 66 25033 66 25034 66 25035 66 Article No. Page 25036 66 25037 66 25038 66 25040 66 25041 66 25042 66 25044 66 25045 66 25046 66 25048 66 25049 66 25050 66 25051 66 25052 66 25053 66 25054 66 25055 66 25072 72 25300 65 25302 65 25304 65 25305 65 25306 65 25307 65 25308 65 25309 65 25320 66 25321 66 25322 66 25323 66 25324 66 25325 66 25326 66 25329 65 25330 65 25332 65 25335 65 25337 65 25338 65 25339 65 25340 65 29102 52 29103 52 29104 52 29105 52 29106 52 29107 52 29108 52 29112 52 29113 52 29114 52 29116 52 29159 52 29160 52 29161 52 29209 52 Article No. Page 29210 52 29211 52 29252 52 29253 52 29254 52 29255 52 29256 52 29257 52 29258 52 30102 7 30103 7 30104 7 30105 7 30302 7 30303 7 30304 7 30305 7 30402 6 30403 6 30404 6 30405 6 30406 6 30407 6 30408 6 30409 6 30410 6 30411 6 30602 8 30603 8 30604 8 30605 8 30702 8 30703 8 30704 8 30705 8 30802 8 30803 8 30804 8 30805 8 30862 6 30863 6 30864 6 30865 6 30866 6 30867 6 30868 6 30869 6 30870 6 30871 6 30872 5 30873 5 30874 5 30875 5 30876 5 30877 5 30878 5 128 Mapress Catalogue 2008/2009

Inex Article No. Page 30879 5 30880 5 30881 5 30892 4 30893 4 30894 4 30905 4 30906 4 30907 4 30908 4 30909 4 30910 4 30911 4 30932 5 30933 5 30934 5 30935 5 30936 5 30937 5 30938 5 30939 5 30940 5 30941 5 30942 5 30943 5 30944 5 30955 5 30956 5 30957 5 30958 5 30959 5 30960 5 30961 5 31002 9 31003 9 31004 9 31005 9 31006 9 31007 9 31008 9 31009 9 31010 9 31011 9 31106 7 31107 7 31108 7 31109 7 31110 7 31111 7 31204 10 31206 10 31207 10 31209 10 31210 10 31211 10 31212 10 Article No. Page 31213 10 31214 10 31215 10 31216 10 31217 10 31218 10 31219 10 31220 10 31221 10 31222 10 31223 10 31224 10 31225 10 31226 10 31229 10 31230 10 31231 10 31232 10 31233 10 31236 10 31237 10 31238 10 31239 10 31240 10 31241 10 31244 11 31245 11 31246 11 31247 11 31248 11 31249 11 31250 11 31304 11 31305 11 31306 11 31307 11 31308 11 31309 11 31310 11 31311 11 31312 11 31313 11 31316 11 31317 11 31320 11 31321 11 31324 11 31326 11 31329 11 31331 11 31334 11 31336 11 31339 11 31401 12 31454 12 31455 12 Article No. Page 31458 12 31459 12 31461 12 31464 12 31703 13 31704 13 31705 13 31707 13 31708 13 31709 13 31710 13 31711 13 31713 13 31714 13 31715 13 31716 13 31717 13 31718 13 31719 13 31720 13 31721 13 31722 13 31724 13 31726 13 31802 13 31803 13 31804 13 31805 13 31806 13 31807 13 31809 13 31811 13 31814 13 31818 13 31819 13 31820 13 31821 13 31822 13 31823 13 31824 13 31825 13 31826 13 31932 13 31933 13 31936 13 31937 13 31938 13 31939 13 31940 13 32002 6 32003 6 32004 6 32005 6 32006 6 32007 6 32008 6 Article No. Page 32009 6 32010 6 32011 6 32102 7 32103 7 32104 7 32105 7 32106 7 32107 7 32108 7 32109 7 32110 7 32111 7 32303 9 32305 9 32306 9 32307 9 32308 9 32309 9 32310 9 32311 9 32312 9 32313 9 32314 9 32315 9 32316 9 32317 9 32318 9 32319 9 32320 9 32321 9 32322 9 32323 9 32324 9 32331 9 32338 9 32339 9 32345 9 32346 9 32348 9 32606 8 32607 8 32608 8 32609 8 32610 8 32611 8 32706 8 32707 8 32708 8 32709 8 32710 8 32711 8 33203 14 33212 21 33213 21 33214 21 Mapress Catalogue 2008/2009 129

Inex Article No. Page 33215 21 33216 21 33217 21 33218 21 33306 7 33307 7 33308 7 33309 7 33310 7 33311 7 33403 15 33405 15 33407 15 33423 15 33425 15 33427 15 33503 15 33702 19 33703 19 33704 19 33705 19 33706 19 33707 19 33708 19 33709 19 33710 19 33711 19 33729 19 33730 19 33731 19 33803 14 33804 14 33805 14 33806 14 33807 14 33833 14 33834 14 33835 14 33836 14 33837 14 33838 14 33839 14 33914 21 33915 21 33916 21 33917 21 33918 21 33919 21 33920 21 33921 21 33922 21, 37 33923 21, 37 33924 21, 37 33925 21, 37 33926 21, 37 33927 21, 37 Article No. Page 33928 21, 37 33929 21, 37 33930 21, 37 33931 21, 37 34000 40 34001 40 34002 40 34003 40 34007 41 34008 41 34009 41 34010 41 34014 41 34015 41 34016 41 34017 41 34021 41 34022 41 34023 41 34024 41 34028 42 34029 42 34030 42 34031 42 34032 42 34033 42 34034 42 34035 43 34036 43 34037 43 34038 43 34039 43 34040 43 34041 43 34042 43 34043 43 34044 43 34045 43 34046 43 34047 43 34048 43 34049 43 34050 43 34051 43 34052 44 34053 44 34054 44 34055 44 34056 44 34057 44 34058 44 34059 44 34060 44 34061 44 34063 44 34066 45 Article No. Page 34067 45 34068 45 34069 45 34070 45 34071 45 34072 45 34073 45 34074 45 34075 45 34076 45 34077 45 34078 45 34083 45 34084 45 34086 45 34087 45 34089 45 34090 45 34091 45 34092 45 34093 45 34097 43 34098 43 34099 43 34101 40 34102 40 34103 40 34104 40 34105 40 34106 40 34107 40 34108 40 34109 40 34110 40 34111 40 34112 40 34113 40 34114 40 34115 42 34116 42 34117 42 34118 42 34119 42 34120 42 34122 40 34123 42 34124 42 34128 42 34129 42 34133 42 34134 42 34135 42 34136 47 34137 47 34138 47 34144 46 Article No. Page 34145 46 34146 46 34147 46 34148 46 34149 45 34150 45 34151 45 34152 45 34153 45 34156 47 34158 47 34159 47 34161 47 34179 48 34180 48 34181 48 34182 48 34183 48 34184 48 34185 48 34186 48 34187 40 34188 40 34189 40 34190 41 34191 41 34192 41 34193 41 34194 41 34195 41 34196 41 34197 41 34198 41 34214 47 34248 40 34249 40 34250 40 34259 42 34260 42 34261 42 34264 44 34265 44 34266 44 34267 44 34268 44 34269 44 34270 44 34285 42 34286 42 34287 42 34296 42 34297 42 34298 42 34346 45 34347 45 34355 47 130 Mapress Catalogue 2008/2009

Inex Article No. Page 34356 47 34400 46 34401 46 34402 46 34403 46 34404 46 34405 46 34406 46 34407 46 34408 46 34409 46 34430 46 34431 46 34432 46 34433 46 34434 46 34435 46 34436 46 34437 46 34438 46 34439 46 34440 46 34441 40 34442 40 34443 40 34444 41 34445 41 34446 41 34447 41 34448 41 34449 41 34450 41 34451 41 34452 41 34462 49 34463 49 34464 49 34465 49 34466 49 34467 49 34468 49 35032 18 35033 18 35034 18 35035 18 35036 18 35037 18 35038 18 35042 18 35043 18 35044 18 35045 18 35046 18 35047 18 35072 18 35075 18 Article No. Page 35132 18 35134 18 35300 17 35301 17 35302 17 35303 17 35304 17 35305 17 35306 17 35307 17 35308 17 35309 17 35320 18 35321 18 35322 18 35323 18 35324 18 35325 18 35326 18 35330 16 35331 16 35332 16 35333 16 35334 16 35335 16 35336 16 35337 16 35338 16 35339 16 35340 16 35350 17 35351 17 35352 17 35353 17 35354 17 35355 17 35356 17 35357 17 35358 17 35359 17 35360 16 35361 16 35362 16 35363 16 35364 16 35365 16 35366 16 35367 16 35368 16 35369 16 35370 16 35380 17 35382 17 35384 17 35386 17 35387 17 Article No. Page 35388 17 35389 17 35400 16 35402 16 35405 16 35407 16 35408 16 35409 16 35410 16 36141 20, 37, 48 36142 20, 37, 48 36143 20, 37, 48 36144 20, 37, 48 36145 20, 37, 48 36146 20, 37, 48 36147 20, 37, 48 36148 20, 37, 48 36149 20, 37 36150 20, 37 36151 20, 37 36152 20, 37 36153 20, 37 36154 20, 37 36155 20, 37 36156 20, 37 39109 24 39110 24 39111 24 39202 4 39203 4 39204 4 39205 4 39206 4 39207 4 39208 4 39209 4 39210 4 39211 4 39402 4 39403 4 39404 4 39405 4 39406 4 39407 4 39408 4 39409 4 39410 4 39411 4 39602 24 39603 24 39604 24 39605 24 39606 24 39607 24 39608 24 56319 76 Article No. Page 56321 76 56322 76 56323 76 56324 76 56325 76 56326 76 56327 76 56328 76 56329 76 67002 76 67004 76 67005 76 67006 76 67007 76 67008 76 67009 76 67010 76 67011 76 67102 76 67104 76 67105 76 67106 76 67107 76 67108 76 67109 76 67110 76 67111 76 67206 80 67209 80 67211 80 67212 80 67214 80 67215 80 67218 80 67219 80 67220 80 67225 80 67226 80 67227 80 67228 80 67229 80 67230 80 67231 80 67232 82 67233 80 67234 82 67235 82 67236 82 67237 82 67238 82 67239 80 67243 82 67244 80 67245 80 67246 80 67247 80 Mapress Catalogue 2008/2009 131

Inex Article No. Page 67248 80 67250 80 67251 80 67252 80 67253 80 67260 80 67261 80 67269 80 67270 80 67305 79 67307 79 67309 79 67312 79 67313 79 67317 79 67318 79 67323 79 67324 79 67325 79 67327 79 67330 79 67337 79 67338 79 67344 81 67346 79 67347 81 67348 81 67349 81 67350 81 67352 81 67353 81 67356 81 67357 81 67360 81 67361 81 67365 81 67366 81 67368 81 67369 81 67372 81 67373 81 67402 78 67404 78 67405 78 67406 78 67407 78 67408 78 67503 79 67506 79 67507 79 67508 79 67509 79 67510 79 67511 79 67515 78 67516 78 Article No. Page 67517 78 67518 78 67519 78 67520 78 67521 78 67602 77 67604 77 67605 77 67606 77 67607 77 67608 77 67609 77 67610 77 67611 77 67702 78 67704 78 67705 78 67706 78 67707 78 67708 78 67709 78 67710 78 67711 78 67802 82 67805 82 67806 82 67809 82 67811 82 67814 82 67818 82 68002 79 68004 79 68005 79 68006 79 68007 79 68008 79 68009 79 68010 79 68011 79 68102 77 68104 77 68105 77 68106 77 68107 77 68108 77 68109 77 68110 77 68111 77 68302 77 68304 77 68305 77 68306 77 68307 77 68308 77 68309 77 68310 77 Article No. Page 68311 77 68703 82 68707 82 68708 82 68709 82 68710 82 68711 82 68715 82 68756 83 68757 83 68758 83 68759 83 68760 83 68761 83 68762 83 68763 83 68764 83 68766 83 68767 83 68768 83 68769 83 68770 83 68771 83 68772 83 68773 83 68774 83 68776 83 68777 83 68778 83 68779 83 68780 83 68781 83 68782 83 68783 83 68791 84 68793 84 68794 84 68795 84 68796 84 68797 84 68798 84 68799 84 80102 26 80103 26 80104 26 80105 26 80302 27 80303 27 80304 27 80305 27 80602 27 80603 27 80604 27 80605 27 80702 27 80703 27 Article No. Page 80704 27 80705 27 81002 28 81003 28 81004 28 81005 28 81006 28 81007 28 81008 28 81009 28 81010 28 81011 28 81106 26 81107 26 81108 26 81109 26 81110 26 81111 26 81204 29 81206 29 81207 29 81209 29 81210 29 81211 29 81212 29 81213 29 81214 29 81215 29 81216 29 81217 29 81218 29 81219 29 81220 29 81221 29 81222 29 81223 29 81224 29 81225 29 81226 29 81229 29 81230 29 81231 29 81232 29 81233 29 81236 29 81237 29 81238 29 81239 29 81240 29 81241 29 81244 29 81245 29 81246 30 81247 30 81248 30 81249 30 132 Mapress Catalogue 2008/2009

Inex Article No. Page 81250 30 81304 30 81305 30 81306 30 81307 30 81308 30 81309 30 81310 30 81311 30 81312 30 81313 30 81316 30 81317 30 81320 30 81321 30 81324 30 81326 30 81329 30 81331 30 81334 30 81336 30 81339 30 81454 31 81455 31 81458 31 81459 31 81461 31 81464 31 81703 32 81704 32 81705 32 81707 32 81708 32 81709 32 81710 32 81711 32 81713 32 81714 32 81715 32 81716 32 81717 32 81718 32 81719 32 81720 32 81721 32 81722 32 81724 32 81726 32 81802 32 81803 32 81804 32 81805 32 81806 32 81807 32 81809 32 81811 32 Article No. Page 81814 32 81818 32 81819 32 81820 32 81821 32 81822 32 81823 32 81824 32 81825 32 81826 32 82002 26 82003 26 82004 26 82005 26 82006 26 82007 26 82008 26 82009 26 82010 26 82011 26 82102 26 82103 26 82104 26 82105 26 82106 26 82107 26 82108 26 82109 26 82110 26 82111 26 82303 28 82305 28 82306 28 82307 28 82308 28 82309 28 82310 28 82311 28 82312 28 82313 28 82314 28 82315 28 82316 28 82317 28 82318 28 82319 28 82320 28 82321 28 82322 28 82323 28 82324 28 82331 28 82338 28 82339 28 82345 28 82346 28 Article No. Page 82348 28 82606 27 82607 27 82608 27 82609 27 82610 27 82611 27 82706 27 82707 27 82708 27 82709 27 82710 27 82711 27 83212 38 83213 38 83214 38 83215 38 83216 38 83217 38 83218 38 83306 27 83307 27 83308 27 83309 27 83310 27 83311 27 83403 33 83405 33 83407 33 83423 33 83425 33 83427 33 83503 34 83702 36 83703 36 83704 36 83705 36 83706 36 83707 36 83708 36 83709 36 83710 36 83711 36 83803 33 83804 33 83805 33 83806 33 83807 33 83833 33 83834 33 83835 33 83836 33 83837 33 83838 33 83839 33 85032 35 Article No. Page 85033 35 85034 35 85035 35 85036 35 85037 35 85038 35 85042 35 85043 35 85044 35 85045 35 85046 35 85047 35 85072 35 85075 36 85132 36 85134 36 85300 34 85301 34 85302 34 85303 34 85304 34 85305 34 85306 34 85307 34 85308 34 85309 34 85320 36 85321 36 85322 36 85323 36 85324 36 85325 36 85326 36 85330 34 85331 34 85332 34 85333 34 85334 34 85335 34 85336 34 85337 34 85338 34 85339 34 85340 34 85350 35 85351 35 85352 35 85353 35 85354 35 85355 35 85356 35 85357 35 85358 35 85359 35 85360 35 85361 35 Mapress Catalogue 2008/2009 133

Inex Article No. Page 85362 35 85363 35 85364 35 85365 35 85366 35 85367 35 85368 35 85369 35 85370 35 90000 119 90010 105 90011 115 90070 91 90081 89 90082 89 90083 89 90084 89 90085 89 90086 89 90087 89 90092 89 90093 89 90094 89 90095 89 90096 89 90097 89 90098 89 90212 70 90213 70 90214 70 90215 70 90216 70 90217 70 90218 70 90222 22 90223 22 90224 22 90225 22 90226 22 90227 22 90228 22 90229 22 90230 22 90231 22 90241 97 90242 97 90243 97 90244 97 90245 97 90282 91 90341 119 90342 119 90343 119 90344 119 90345 119 90346 119 Article No. Page 90347 119 90348 119 90349 119 90350 119 90351 117 90358 118 90359 117 90360 117 90363 117 90364 116 90365 116 90366 117 90372 118 90373 118 90374 118 90375 118 90376 118 90391 118 90394 118 90396 118 90402 88 90403 88 90404 88 90405 88 90406 88 90407 88 90408 88 90409 88 90410 88 90411 88 90422 88 90423 88 90424 88 90425 88 90426 88 90427 88 90428 88 90429 88 90430 88 90431 88 90442 88 90443 88 90444 88 90445 88 90446 88 90447 88 90448 88 90452 49 90453 49 90454 49 90455 49 90456 49 90457 49 90458 49 90471 49 90472 49 Article No. Page 90473 49 90483 88 90484 88 90485 88 90486 88 90487 88 90488 88 90489 88 90490 88 90491 88 90492 88 90532 104 90533 104 90534 104 90535 104 90536 104 90539 105 90540 105 90541 105 90560 115 90561 115 90562 116 90563 115 90564 115 90570 115 90571 115 90572 115 90642 110 90643 110 90644 110 90645 110 90646 110 90668 112 90671 108 90672 108 90673 108 90674 108 90675 108 90922 118 90923 118 90924 118 90925 118 90926 118 90927 118 90928 118 90929 118 90930 118 90931 118 90932 14 90933 14 90934 14 90935 14 90936 14 90965 86 90966 86 90967 86 Article No. Page 90968 86 90969 86 90970 86 90971 86 90972 86 90973 86 90974 86 90980 21 90981 21 90982 21 90983 21 90984 21 90985 21 90986 21 90987 21 90988 21 90989 21 91031 89 91032 89 91033 89 91034 89 91035 89 91036 89 91037 89 91038 89 91039 89 91041 89 91042 89 91043 89 91044 89 91045 89 91046 89 91047 89 91048 89 91049 89 91060 90 91061 90 91062 90 91069 70, 90 91070 70, 90 91071 70, 90 91072 70, 90 91073 70, 90 91084 116 91086 116 91090 116 91091 116 91095 49 91097 48 91098 48 91099 48 91100 48 91107 49 92020 86 92022 86 92023 86 134 Mapress Catalogue 2008/2009

Inex Article No. Page 92024 86 92025 86 92026 86 92027 86 92028 86 92029 86 92041 87 92043 87 92080 84 92082 84 92083 84 92084 84 92085 84 92086 84 92087 84 92088 84 92089 84 94915 87 94916 87 94917 87 94922 86 94923 86 94924 86 94925 86 94926 86 94931 87 94932 87 94935 87 94936 87 241.540.00.1 96 241.541.P1.1 98 241.541.P5.1 98 241.542.1P.1 98 241.543.00.1 99 601.508.00.5 90 601.700.00.1 91 601.731.00.1 91 601.732.00.1 92 601.733.00.1 91 601.736.00.1 92 601.737.00.1 92 601.738.00.1 92 601.741.00.1 93 601.801.00.1 93 601.802.00.1 93 601.806.00.1 93 602.508.00.5 90 602.509.00.5 90 602.700.00.1 91 603.508.00.5 90 603.700.00.1 91 604.508.00.5 90 604.700.00.1 91 605.508.00.5 90 605.700.00.1 91 606.508.00.5 90 Article No. Page 606.700.00.1 91 607.508.00.5 90 607.700.00.1 91 690.500.P2.2 101 690.500.P5.2 101 690.502.1P.2 101 690.502.2P.2 101 690.506.00.2 103 690.591.P1.1 112 690.591.P5.1 112 690.593.00.1 112 690.594.1P.1 112 690.597.00.1 113 691.000.P2.3 116 691.000.P5.3 116 691.002.1P.3 116 691.009.1P.1 98 691.009.P2.1 98 691.009.P5.1 98 691.010.P1.3 96 691.010.P5.3 96 691.012.1P.3 96 691.020.P2.3 97 691.091.00.1 98 691.100.P2.1 100 691.102.1P.1 100 691.105.5P.1 100 691.110.P2.3 101 691.112.1P.3 101 691.134.00.1 99 691.135.00.1 113 691.136.00.1 113 691.137.00.1 104 691.138.00.1 104 691.139.00.1 108 691.140.00.1 108 691.141.00.1 117 691.210.P2.3 102 691.210.P5.3 102 691.212.1P.3 102 691.212.2P.3 102 691.215.P1.3 103 691.215.P5.3 103 691.217.1P.3 103 691.292.00.1 104 691.296.00.1 105 691.300.P2.2 106 691.300.P5.2 106 691.302.1P.2 106 691.302.2P.2 106 691.303.00.1 109 691.310.P2.3 107 691.310.P5.3 107 691.312.1P.3 107 691.312.2P.3 107 691.340.P1.3 110 Article No. Page 691.340.P5.3 110 691.342.1P.3 110 691.392.00.1 111 691.396.00.1 111 691.398.00.1 107 691.399.00.1 108 691.400.P0.1 114 691.402.1P.1 114 691.405.5P.1 114 691.420.P0.1 114 691.422.1P.1 114 Mapress Catalogue 2008/2009 135

Notes 136 Mapress Catalogue 2008/2009

Subject to change without notice. The information in this ocument contains general escription of the technical options available, which o not always have to be present in the iniviual cases. The require features shoul therefore be specifie in each iniviual case at the time of closing the contract. Geberit International Sales AG C-8640 Rapperswil Switzerlan sales@geberit.com www.international.geberit.com B123-001&BDE 04.2008