Super G3 FAX Board-AE1 PARTS CATALOG SEPTEMBER 12, 2009 REV. 0. CANON Super G3 FAX Board-AE1 REV. 0 PRINTED IN U.S.A.
|
|
- Marylou Cobb
- 7 years ago
- Views:
Transcription
1 Super G FAX Boar-AE1 PARTS CATAOG SEPTEMBER 12, 2009 REV. 0 COPYRIGHT 2009 CANON INC. CANON Super G FAX Boar-AE1 REV. 0 PRINTED IN U.S.A.
2
3 PREFACE This Parts Catalog contains listings of parts use Diagrams are provie with the listings to ai the service technician in ientifying clearly, the item to be orer. Whenever orering parts, consult this Parts Catalog for all of the information pertaining to each item. Be sure to inclue, in the Parts Request, the full item escription, the item part number, an the quantity. COPYRIGHT (C) 1999 CANON INC. Use of this manual shoul be strictly supervise to avoi isclosure of confiential information.
4
5 Contents NUMERICA INDEX Super G FAX Boar-AE1(Numerical Inex) Super G FAX Boar-AE1(Parts Catalog) T01 ACCESSORIES T20 G FAX ASSEMBY, 1INE T21 SPEAKER ASSEMBY...2- ZZA MECHANICA STANDARD PARTS (HOW TO USE) ZZB MECHANICA STANDARD PARTS (SCREWS) ZZC MECHANICA STANDARD PARTS (BOTS) ZZD MECHANICA STANDARD PARTS (NUTS) ZZE MECHANICA STANDARD PARTS (RETAINING RINGS) 2-14
6
7 NUMERICA INDEX Super G FAX Boar-AE1(Numerical Inex) FIGURE PARTS NUMBER & KEY NO. FK T21-1 FK T20-1 FK T01-1 FK T01-1 FK T01-1 FM T21 - FM T20-2 FM T20-2 FM T20 - FM T20 - FM T20 - FM T20 - FM T20-4 FM T20-5 FM T20-6 FM T20-4 FM T20-4 FM T20 - HH T01-2 NPN T01 - QK T01 - QK T01-4 QK T01-5 QK T01-6 QK T01-7 VS T20-7 VS T21-2 PARTS NUMBER FIGURE & KEY NO. PARTS NUMBER FIGURE & KEY NO 1-1
8
9 Super G FAX Boar-AE1(Parts Catalog) Super G FAX Boar-AE1 JP US EUR AU F F F F
10
11 Contents T01 ACCESSORIES T20 G FAX ASSEMBY, 1INE T21 SPEAKER ASSEMBY...2- ZZA MECHANICA STANDARD PARTS (HOW TO USE) ZZB MECHANICA STANDARD PARTS (SCREWS) ZZC MECHANICA STANDARD PARTS (BOTS) ZZD MECHANICA STANDARD PARTS (NUTS) ZZE MECHANICA STANDARD PARTS (RETAINING RINGS)
12
13 FIGURE T01 ACCESSORIES AU EUR DE FR GB FIGURE & KEY NO. PARTS NUMBER R A N K Q'TY DESCRIPTION SERIA NUMBER/ REMARKS S V C Fig.T01 NPN RF ACCESSORIES 1 FK CD-ROM,SOFTWARE FOR FAX DRIVER JP 1 FK CD-ROM,SOFTWARE FOR FAX DRIVER US,AU 1 FK CD-ROM,SOFTWARE FOR FAX DRIVER EUR 2 HH CORD, MODUAR QK CORD, MODUER EUR 4 QK CORD, MODUER DE 5 QK CORD, MODUER FR 6 QK CORD, MODUER GB 7 QK CORD, MODUER AU 2-1
14 FIGURE T20 G FAX ASSEMBY, 1INE 2 2 EXCEPT JP JP 4 (J107) (J2121) 5 (J104) (J0) 1 (J10) (J4) (J109) (J205) (J02) 6 (J105) (J01) 7 FIGURE & KEY NO. PARTS NUMBER R A N K Q'TY DESCRIPTION SERIA NUMBER/ REMARKS S V C Fig.T20 FM G FAX ASSEMBY, 1 INE JP Fig.T20 FM G FAX ASSEMBY, 1 INE US,AU Fig.T20 FM G FAX ASSEMBY, 1 INE EUR 1 FK CABE, MDR-FX15 2 FM PSEUDO CI2 PCB ASSEMBY JP 2 FM OFFHOOK POWER SUPPY PCB ASS'Y EXCEPT JP FM INE PCB ASS'Y EXCEPT EUR FM INE PCB ASS'Y EUR 4 FM MODUAR PCB ASSEMBY JP 4 FM MODUAR PCB ASSEMBY US,AU 4 FM MODUAR PCB ASSEMBY EUR 5 FM CABE, CI POWER SUPPY 6 FM CABE, FAX POWER SUPPY 7 VS CONNECTOR, SNAP TIGHT, BK 2-2
15 FIGURE T21 SPEAKER ASSEMBY 2 1 (SP1) (J701) FIGURE & KEY NO. PARTS NUMBER R A N K Q'TY DESCRIPTION SERIA NUMBER/ REMARKS S V C Fig.T21 FM SPEAKER ASSEMBY 1 FK SPEAKER SP1 2 VS CONNECTOR, SNAP TIGHT, BK 2-
16 FIGURE ZZA MECHANICA STANDARD PARTS (HOW TO USE) Mechanical stanar parts About a mechanical stanar parts A Mechanical stanar parts is a mechanical part which not parts peculiar to a prouct. They are parts which are common to a Canon prouct an are use, such as a screw an a washer. The Fig No. an parts number of the mechanical stanar parts are not liste in the prouct parts catalog. Refer to the parts catalog of mechanical stanar parts when checking the parts number for screw or washer etc. an ientify them by part shape or size. Material an surface treatment of a mechanical stanar parts Material an surface treatment of mechanical stanar parts are assigne commonly for each part. Refer to the Table 1 for the parts which material an surface treatment are assigne as numbers. Table 1 Material an Surface treatment No. Material Surface treatment Color 1 2 Stainless steel Stainless steel black coloring (BC4) not to be given Black White 4 Brass Regular nickel plating (N) Black nickel plating (BN) White Black 5 White zinc trivalent chromate treating (ZC) White 6 Regular nickel chromium plating (NC) White 7 Steel Regular nickel plating (N) White 8 Iron an steel phosphating (P1) Black 9 Black zinc trivalent chromate treating (BZ) Black 2-4
17 FIGURE ZZB MECHANICA STANDARD PARTS (SCREWS) 1. Screws How to rea Parts Numbers Screws XB Type No. XB1-2 expresses Bining hea machine screw. Normal esignation 40 expresses M4.0. ength 0-60 expresses a length of 6.0mm. Material an Surface treatment 9 expresses Steel (Black zinc trivalent chromate treating) from Table Cross Recesse Hea Screws for Precision Equipments D XA1-1, 6, 7 D XA1-4 H K H D XA1- H Hea size (mm) Pan hea Class 1 Countersunk hea Class 1 Oval countersunk hea Class 1 Pan hea Class Pan hea Class 2 M1.4 M1.6 M1.7 M2 M M
18 1-2. Precision Tapping Screws D XA4-1, 2, 4 D XA4-6, 7, 9 H H D XA4- D XA4-8 H H D XA4-5 H Hea size (mm) With tatere en pan hea Class 1 With tatere en pan hea Class With tatere en countersunk hea With tatere en pan hea Class 2 With parallel en ultra thin hea With parallel en pan hea Class 1 With parallel en pan hea Class With parallel en countersunk hea With parallel en pan hea Class 2 M1.4 M1.6 M1.7 M2 M M
19 1-. Cross Recesse Hea Screws k XB1-1 k XB1- k k k XB1-2 k XB1-4 f k f k Hea size (mm) Pan hea Bining hea Countersunk hea Oval countersunk hea Screw part length b M2 M M2.6 M M4 M
20 1-4. Cross Recesse Hea Screws with Captive Washer XB2-1 XB2-2 XB2- XB2-4 XB2-5 XB2-6 XB2-7 XB2-8 Pan hea + Plain washer (circular bright) Pan hea + Spring washer Pan hea + Toothe lock washer Pan hea + Spring washer an plain washer (circular bright) Bining hea + Plain washer (circular bright) Bining hea + Spring washer Bining hea + Toothe lock washer Bining hea + Spring washer an plain washer (circular bright) 2-8
21 1-5. Hexagon Hea Tapping Screws for Matallic Materials Hea size (mm) For metallic materials For metallic materials with clawe M M Special Tapping Screws k D B H f k Hea size (mm) Bining hea M M
22 1-7. General Hea Tapping Screws k XB4-6 k XB4-8 k k k XB4-7 f k Hea size (mm) Pan hea Bining hea Countersunk hea M2 M M2.6 M M4 M Tapping Screws for Metallic Materials k XB5-1 k XB5-6 k k k XB5-2 f k Hea size (mm) Pan hea Bining hea Flange pan hea M M2.6 M M4 M
23 1-9. Hexagon Socket Set Screws XB6-1 XB6-2 XB6- Hea size (mm) Cone point Double point Flat point M1.6 M M2 M1.7 M2.6 M M5 M M Flange Pan Hea Machine Screws k 1 p t S t k Hea size (mm) Flange pan hea M2 M M2.6 M M5 M
24 FIGURE ZZC MECHANICA STANDARD PARTS (BOTS) 2. Bolts (Socket hea cap screw) How to rea Parts Numbers Bolt (Socket hea cap screw) XB Type No. Normal esignation ength Material an Surface treatment XB7-1 expresses Hexagon socket hea cap screws. 080 expresses M expresses a length of 40mm. 9 expresses Steel (Black zinc trivalent chromate treating) from Table Hexagon socket hea cap screws k S K b Hea size (mm) Hexagon socket hea cap screws M M4 M5 M6 M8 M10 M12 S k K Screw part length bmax
25 FIGURE ZZD MECHANICA STANDARD PARTS (NUTS). Nuts How to rea Parts Numbers Nuts XB Type No. XB7-210 expresses Hexagon nut class 1. Normal esignation Material an Surface treatment 0-0 expresses M.0. 9 expresses Steel (Black zinc trivalent chromate treating) from Table Hexagon Nuts an Hexagon Thin Nuts S m m Hexagon nut Class 1 Hexagon nut Class Hexagon nut Style 1 ouble chamfere Hexagon nut Style 1 washer face Hea size (mm) M2 M M M4 M5 M6 M Hexagon nut Style 2 ouble chamfere Hexagon nut Style 2 washer face Hexagon nut Hexagon thin nut ouble chamfere Hexagon thin nut not chamfere 2-1
26 FIGURE ZZE MECHANICA STANDARD PARTS (RETAINING RINGS) 5. Retaining Rings How to rea Parts Numbers Retaining Rings XD Type No. Nominal esignation Material an Surface treatment XD2-110 expresses retaining ring-e type (Type1) expresses a 020 of nominal esignation. (See Table 5) 2 expresses Stainless steel (Surface treatment is not to be given) from Table Retaining Rings - E type Table 5 Nominal Type esignation (mm) D (mm) t (mm) D t Retaining ring - E type (Type 1) Retaining ring - E type (Type 2) Type Type
27 5-2. Grip Rings a b t Grip ring 5-. Toothe Retaining Rings D t Toothe retaining ring 2 0 Table 5 Nominal esignation (mm) t (mm) b (mm) a (mm) 0 (mm) Nominal esignation Table (mm) D (mm) t (mm) No of teeth
28 5-4. Retaining Rings - C Type Table 5 Nominal esignation (mm) t (mm) b (mm) a (mm) 0 (mm) b 0 a t Retaining ring - C type for shaft a b t Retaining ring - C type for hole Table 5 Nominal esignation (mm) t (mm) b (mm) a (mm) 0 (mm)
29 Prepare by OIP Service Management Center CANON INC.
30
PARTS CATALOG MF4580/4570/4554/4553/ 4550/4453/4452/4450/4430/ 4420/4412/4410/D550/520
PARTS CATALOG MF4580/4570/4554/4553/ 4550/4453/4452/4450/4430/ 4420/4412/4410/D550/520 Sep 17 2010 PREFACE This Parts Catalog contains listings of parts used Diagrams are provided with the listings to
More informationFasteners and screw threads
ISO Standards Handbook: Fasteners and screw threads Volume 2: Product standards Contents Part 3 : Product standards 2001, Ed. 5, 1094 p., ISBN 92-67-10345-8 3.1 External drive hexagon head bolts and screws
More informationOutdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series
COMPONENTS PRODUCT INFORMATION RoHS Compliant NEW Outdoor Use Waterproof I/O Connectors (Optical / Modular / Electrical) FO-BH, FO-BC, NT5, JN2 / W Series Optical FO-BH Series (Compact Type) CONNECTOR
More informationMachine devices, jig devices
Machine devices, jig devices 853 K0697 Rolled thread studs DIN 6379 Material: Tempered steel. KIPP Rolled thread studs DIN 6379 Order No. D L B1 B2 Approx. weight g Surface finish: Thread rolled. Class
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationKIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices
04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust
More informationDESCRIPTION. Stud Bolts for Pressure-Temperature Piping 2-1. General Purpose End-to-End Studs 2-2. Tap End Stud Bolts 2-3. Double End Stud Bolts 2-4
DESCRIPTION PAGE B7 Studs and Nuts Stud Bolts for Pressure-Temperature Piping 2-1 General Purpose End-to-End Studs 2-2 Tap End Stud Bolts 2-3 Double End Stud Bolts 2-4 Sigma Fasteners, Inc. Section 2 STUD
More informationPARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationMachine Screws, Dowel Pins and Hardware
Machine Screws, Dowel Pins and Section Contents Plain Socket Head Screws...Page 13-2 Wire Locking Screws...Page 13-3 Captive Screws...Page 13- Ventilation Screws...Page 13- Shoulder Screws...Page 13-
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationGeberit Mapress Catalogue 2008 / 2009. Valid from 1 April 2008
Geberit Mapress Catalogue 2008 / 2009 Vali from 1 April 2008 Mapress Stainless Steel Page 3 Mapress CrNi Steel Page 23 Mapress Stainless Steel silicone-free Page 25 Mapress Stainless Steel Gas Page 39
More informationPB accessories. PB accessories. Labelling option. Order Information B4-2728. Printed board handle A BZA42727 BZA42724.
Printed board handle A Assembly behind front panels Only use printed board handle in conjunction with printed board retainer A (6087-097) Insertion and extraction function Labelling option B4-2728 Item
More informationPIXUS ip4200 PIXMA ip4200
PIXUS ip4200 PIXMA ip4200 REVISION 0 9992A001AA 9992A002AA 9992A003AA 9992A004AA 9992A006AA 9992A007AA 9992A008AA 9992A009AA 9992A010AA 9992A011AA 9992A012AA 9992A013AA 9992A014AA 9992A015AA PIXMA ip4200/
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. 2012NB Description 304mm (12") Automatic Thickness Planer CONCEPTION AND MAIN APPLICATIONS * Compact and light weight (27 Kg./59 lbs) automatic thickness planer for easier
More informationC-Plus Softgrip Screwdrivers
10 C-Plus Softgrip Screwdrivers The multi-purpose screwdrivers with 2K handles From professionals for professionals. Perfect in every detail the C-PLUS series is the result of long-lasting studies into
More informationTwo most common lock nut groups: 1-Prevailing Torque Type Lock Nuts:
Two most common lock nut groups: 1. PREVAILING TORQUE a design feature of the lock nut produces friction between threads of mated components thereby increasing the force needed to tighten as well as loosen
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More information2010-2011. Shortform Catalogue. Solutions for appliance & electronic applications. rocker switches. lever. switches. push. switches.
2010-2011 Solutions for appliance & electronic applications Shortform Catalogue rocker lever push vandal resistant slide door snap-action & safety rotary IEC sockets fuseholders indicators A trading name
More informationEJOT Spiralform. The thread formers for metal. EJOT The Quality Connection
EJOT Spiralform The thread formers for metal EJOT The Quality Connection Imprint Editor: EJOT GmbH & Co. KG Industrial Fasteners Division D 57319 Bad Berleburg Layout and Realisation: EJOT GmbH & Co. KG
More informationC O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S
C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family
More informationINDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED
INDICATOR POST STYLE 2945 A TELESCOPING BARREL ASSEMBLY UL AND FM APPROVED Available in Sizes B C D E See Page 6 for Dimensions Kennedy Valve/Indicator Posts 17-1 INDICATOR POST STYLE 2945 A TELESCOPING
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationPARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS
PARTS & SERVICE MANUAL for CONTEMPO SERIES WARMER LAMPS Merco Contempo Warmer Lamps offer graceful, dramatic styling to match any décor. They are made of exacting tolerance from heavy duty, solid, mandrelspun
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationAutoDome Easy II. VEZ Series. Mounting Manual
AutoDome Easy II VEZ Series en Mounting Manual AutoDome Easy II Table of Contents en 3 Table of Contents 1 Important Safety Instructions 5 2 Unpacking 7 2.1 Parts List 7 3 Description 9 4 Installing a
More informationCHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.
CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the
More informationSpare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S
*1756202470* 17562.0247.0 REV3 06/09 2012 Spare Parts List Activ A 25C Activ A 30C Activ A 35C Activ A 18S Activ A 25S Activ A 30S Issue Table description Issue n. of pages Overall view 06/2009 1 C.h.
More informationUNITED STATES CUTTING TOOL INSTITUTE Product Groupings for Standards Activities CUTTING TOOL PRODUCTS
CUTTING TOOL PRODUCTS 1. BORING ISO 5609 Boring bars for indexable inserts Dimensions ISO 6261 Boring bars (tool holders with cylindrical shank) for indexable inserts Designation JIS B 4128 Boring bars
More informationX-axis Nut-rotation Type Cartesian Robot Assembly Procedures First Edition
X-axis Nut-rotation Type Cartesian Robot Assembly Procedures First Edition Thank you for purchasing an IAI product. Assemble your product correctly by referring to this Assembly Procedures. No. NS (nut-rotation
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationContents. Description Page Description Page
Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder
More informationPAM Connectors. PAM Bayonet Connectors
PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and
More informationUFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
More informationMetric Composite Push-In Fittings
Metric Composite Push-In Fittings Version 2013 1.0 3058 Ranchview Lane North. Plymouth, MN 55447 Polyconn now offers a Metric fitting composite line to complement our inch composite fittings. They can
More informationStandard Sleep Pod Side Entry Assembly Instructions
Standard Sleep Pod Side Entry Assembly Instructions www.podtime.co.uk enquiries@podtime.co.uk Working House Ltd How to assemble your pod Pod assembly onsite is a relatively simple exercise for two people
More informationPARTS LIST DOMESTIC. Eclipse Ergonomic Tilting Braising Pans. BPP-30E, BPP-40E Braising Pans Circa 2003 to Present
IMPORTANT INFORMATION KEEP FOR OPERATOR IMPORTANT INFORMATION PARTS LIST DOMESTIC This manual provides s for: Eclipse Ergonomic Tilting Braising Pans MODELS: BPM-30E, BPM-40E BPP-30E, BPP-40E Braising
More informationBSAMG160401 M16 x 40 GAL 8.8 STRUCTURAL ASS. 100 BSAMG160451 M16 x 45 GAL 8.8 STRUCTURAL ASS. 100 BSAMG160501 M16 x 50 GAL 8.8 STRUCTURAL ASS.
B88MZ160501 HEX ISO G8.8 B/N ZNC M16 x 50 25 B88MZ0502 HEX ISO G8.8 B/N ZNC M x 50 25 B88MZ0552 HEX ISO G8.8 B/N ZNC M x 55 25 B88MZ0602 HEX ISO G8.8 B/N ZNC M x 60 25 S88MZ0502 HEX ISO G8.8 SETSCREW ZNC
More informationAM/FM ANTENNA RELOCATION KIT
-J0 REV. 008-09-0 AM/FM ANTENNA RELOCATION KIT GENERAL Kit Number 766-09 Models This kit is used to relocate a fender-mounted AM/FM antenna to a Detachable Tour-Pak on specific model motorcycles. For model
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationVE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
More informationFurniture Fittings Furniture Handles and Knobs
Handle profile - Aluminium 21 mm 1.5 mm 2,500 mm 126.21.02 30 mm 126.22.0 11.5 mm 1.5 mm 2,500 mm 126.20.05 AH.4 Dim. A Dim. B Length Usable length Cat. No. 34.5 mm 8.5 mm 2,500 mm 2,460 mm 126.15.00 Dim.
More informationDive Rite 200 & 300 Bar Isolator Manifold Service Manual
Dive Rite 200 & 300 Bar Isolator Manifold Service Manual Principal Photography and Text by Pete Nawrocky Copyright 2003 Lamartek Inc. D/B/A Dive Rite 0 Warning This manual is only to be used as a guide
More information3. Loosen 3 x grub screws in the Dec end cap and unscrew the cap and counterweight shaft. NEQ6 Belt Modification Kit.
NEQ6 Belt Modification Kit. Thank you for your purchase. Please read these instructions fully before fitting. Your package should contain 2 off 47 & 2 off 12 tooth aluminium pulleys 2 off belts 6mm wide
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationSeries 30000 Hose Reels
Operating Instructions and Parts List for Series 30000 Hose Reels - MANUAL DRIVEN - - POWER DRIVEN - SAFETY PRECAUTIONS Personal injury and/or equipment damage may result if proper safety precautions are
More informationTo Use any command in this guide: 1. Select the option from the Design Menu in the Mechanical Eng workspace.
120 1 ME Mechanical Engineers use a variety of mechanical drawings and computer tools for analysis and design. During the design process, drawings are used throughout to develop and document the design
More informationSpare Parts List Activ A 12OV Activ A 15OV Activ A 20OV Activ A 25OV
*175620240* 17562.024.0 REV1 01/06 2010 Spare Parts List Activ A 12OV Issue Table description Issue n. of pages Overall view 1 Main circuit assembly 1 Gas assembly 1 Valves and connection pipes 1 Control
More informationLU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions
LORTONE LU6X-130 Item # 061-092 LU6X Basic Item # 061-090 LU6X-130 Instructions and Parts List (including LU6X Basic) Operating Instructions Introduction The LU6X is one the most versatile pieces of equipment
More informationSTIHL Precision Series Hand Tools
STIHL Precision Series Hand Tools Spare Parts List A PH 80 Hedge Shear M PP 900/700 Pole Pruner Head Assembly B PL 0 Lopper N PP 900 Pole Pruner Head Parts C PL 0 Lopper O PS 0 Pruning Saw D PL 0 Lopper
More informationItem No. Name of Part Item No. Name of Part Item No. Name of Part
www.cranepumps.com Parts for Fig. 4001 Bulletin Item No. Name of Part Item No. Name of Part Item No. Name of Part 1 2 6 9 11 *13 *16 17 *18 19 24 *29 32 37 40 46 Casing Impeller Pump Shaft Suction Cover
More informationTC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationStandard Bills of Materials Commonly Ordered Models Only
Standard Bills of Materials Commonly Ordered Models Only Meters Always check www.lcmeter.com for the most current BOM. This document is for reference only. Always use Bill of Material shipped with meter
More informationPOWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents
-J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English
More informationAM/FM ANTENNA KIT (TOUR-PAK MOUNT)
-J077 REV. 008-0-0 AM/FM ANTENNA KIT (TOUR-PAK MOUNT) GENERAL Kit Number 7-98A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
More informationHARDWARE SHOP COMPLETE INVENTORY TOTAL VALUE: 514.197,88
1 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x10 700 4,69 2 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x16 100 1,3 3 Screw TE 8.8 T.F. galvanized UNI 5739 4x0, 7x20 400 3,88 4 Screw TE 8.8 T.F. galvanized
More information7Čå.e.279(1Ì HEAVY DUTY ANCHOR
HEAVY DUTY ANCHOR HEAVY DUTY ANCHOR - HOW TO CHOOSE Produkt Product ETA ETA Strana Page Beton Concrete Cracked concrete Kámen Stone Plná cihla Solid brick Hollow brick bloky Hollow concrete block / Heavy
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationNuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling
Nuffield and Middleweight Leyland Tractor - 11 inch - Double Clutch Overhaul Part 1 - Clutch Removal and Dismantling Due to the many different configurations of cabed and non-cabed tractors this article
More informationParts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!
Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm
More informationParts List. For printer models: www.satoamerica.com. CL408e / CL412e PN: 9001077(D)
Parts List For printer models: CL408e / CL412e www.satoamerica.com PN: 9001077(D) SATO America, Inc. 10350A Nations Ford Road Charlotte, NC 28273 Main Phone: (704) 644-1650 Technical Support: (704) 644-1660
More information758 Heavy-duty Ratchet Guy Wire Cutter
INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product
More informationREQUEST FOR QUOTE. Material $ Labor/Installation $ tax $ Total $ Material $ Labor/Installation $ tax $ Total $
REQUEST FOR QUOTE Specifications- Knightdale Station Park Naming Rights Exterior Signage General Conditions 1. Delivery of signs to be within 6 weeks of order confirmation. 2. Shop drawings are required
More informationEdge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
More informationHow to choose the very best connectors for your speaker cables and enjoy superb sound from your music system
Not all speaker plugs sound the same How to choose the very best connectors for your speaker cables and enjoy superb sound from your music system By Graham Nalty MA Not all speaker plugs sound the same
More informationLathe Milling Attachment
Lathe Milling Attachment By L C. MASON BY CLEVERLY stacking cold-rolled flat stock together, T-slots and slide for this lathe milling attachment are made without costly machinery. In fact, only two tools,
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationOriginal Assembly Guide
TCT Multipurpose Single Bevel Sliding Compound Mitre Saw Original Assembly Guide Read instructions before assembling this tool. Table of Contents GB Assembly Guide Read instructions before assembling this
More information2700 DUST CONTROL MACHINE:
700 DUST CONTROL MACHINE: 30016 PAGE 1 700 DUST CONTROL MACHINE: 30016 11 17 9 15 8 16 10 1 13 7 6 1 1 30 OLD STYLE BATERY BOX 8 3 5 3 7 0 18 19 31 3 9 5 1 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
More informationSocket case Socket. Easy insertion of tube by the floating mechanism to adjust to the case hole. Clamp bolt. Possible to clamp with one bolt at once.
Multi-connector Series DM RoHS The use of the multiconnector enables panel mount connections with other apparatus and can provide the reliability of one-touch installation and removal of multi-tubes (nylon,
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationBBWX1 Satellite Weather Receiver. Installation and Maintenance Guide
BBWX1 Satellite Weather Receiver Installation and Maintenance Guide Rev FUSA 15JUL2007 Table of Contents Safety Precautions 3 Disclaimer. 3 Contents of Package. 4 Tools Required..4 Installation General
More informationMACHINE DRAWING QUESTION BANK. 2. What are the parts not usually sectioned? (Nov 04)
MACHINE DRAWING QUESTION BANK UNIT-I 1. Answer the following: Sketch a i. Hexagonal nut convention, ii. Convention of a stud bolt. (Nov 04) 2. What are the parts not usually sectioned? (Nov 04) 3 Answer
More informationChar-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997
Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47
More informationPulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE
Pulleys and Belt Pulley Guard - 505862 Install the Major Accessory and Pulley 1. Place the short end of the mounting base holes, and insert - but don t tighten - the setscrews. If the Major Accessory has
More informationSWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL ASSEMBLY AND INSTALLATION INSTRUCTIONS
SWIM N DUNK CHALLENGE RESIDENTIAL BASKETBALL GAMES And COMMERCIAL BASKETBALL GAMES ASSEMBLY AND INSTALLATION INSTRUCTIONS CORPORATE HEADQUARTERS WESTERN SALES AND MANUFACTURING PLANT P.O. Box 400 Canby,
More informationPARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
More informationNordson Automatic Spray Gun Support Kits
Nordson Automatic Spray Gun Support Kits Customer Product Manual Issued / For parts and technical support, call the Finishing Customer Support Center at (800) -99. This document is subject to change without
More informationIKG Bar Grating: Anchoring
IKG Bar Grating: Anchoring All bar grating must be tightly fastened in place. Welding of the grating panels to the supporting members provides a superior, permanent installation. Although, for gratings
More informationCompact cylinder Double acting single rod type. SSD SSD-L (with switch) Double acting Compressed air 1.0. 1.6-10 to 60 (no freezing) Rc1/8 Rc1/4 Rc3/8
* U S 4 Specifications escriptions Bore size mm Actuation Working fluid ax. working pressure Pa in. working pressure Pa Withstanding pressure Pa Ambient temperature Port size Stroke length Rubber cushioned
More information4-Speed Kick Start Kit
4-Speed Kick Start Kit 22-1020 Installed 22-1042 Installed 22-1042 Heavy Duty Kickstart Kit features a chrome smooth thick wall kick cover and heavy duty kick start arm. Fits all 4-Speed Big Twin 1936-84.
More informationStainless Steel Cable Assemblies to Enhance Any Railing and Any View!
2014 Feeney (9/14) King Architectural Metals Stainless Steel Cable Assemblies to Enhance Any Railing and Any View! Standard Cable Assemblies Easy-to-install, prefabricated cable assemblies are an attractive,
More informationFixturing systems Fixturing systems for measurement technology
Fixturing systems Fixturing systems for measurement technology Innovations and new additions to range Sets Spannfix Eco complete set The set contains different supports, extension elements and stop units.
More informationThis product can be assembled to the baseplate maintaining 5 mm center-to-center spacing. Thus any number of poles can end-to-end stack.
page 1/5 Plug-in Screw Connector System for Printed Circuit Boards 950-NLFL-DS 5.00 mm (0.197 in) Spacing - 2-12 poles PICTURES 950-NLFL-DS 950-NLFL & 971-SLK TECHNICAL INFORMATION Description This two
More informationFastener Handout. Introduction: Engineering Design Representation 2. Threads 2. Local Notes (callouts) 8. Threaded Mechanical Fasteners 13
Fastener Handout Introduction: Engineering Design Representation 2 Threads 2 Effect of thread angle on strength: 3 Standardization of Threads: 4 Descriptions of the Thread Series: 4 Class fit: 5 Specification
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationFL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT
-J070 REV. 0-0-0 FL ADJUSTABLE RIDER BACKREST MOUNTING HARDWARE KIT GENERAL Kit Number 9-09A Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com
More informationDirectory chapter 04
M Directory chapter 04 D-Sub Mixed subminiature D connectors New Page D-Sub mixed connector system general information................... 04.02 Contact arrangements............................................
More informationSpare Parts List M96A.24SM/B M96A.28SM/B
*16202390* 162.0239.0 REV5 14/04 2015 Spare Parts List M96A.24SM/B M96A.28SM/B Issue Table description Issue n. of pages Overall view 09/2008 1 C.h. return group and d.h.w. heat exchanger 09/2008 1 C.h.
More informationDiameter. Swift Lift Round Recess Plug. Note: The diameter of the narrow recess plug is the same as the diameter of the round recess plug.
P-5 The P-5 is hot forged from carbon steel. The formed head provis spherical seating that the Lifting Eye engages, while a disc-shaped foot is embedd in the concrete. Due to its being a forged part, the
More informationThe Plastic Injection Moulders. Furniture Fittings & Tube Inserts
The Plastic Injection Moulders Furniture Fittings & Tube Inserts Contents Introduction Page 1 Square Inserts Page 2-3 Round Inserts Page 4-5 Rectangular Inserts Page 6-7 Domed and Shaped Inserts Page 8-9
More informationHürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul
Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationPneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
More informationPROFESSIONAL PRODUCTS- PET NAIL GROOMERS
- S SERVICE NUMBER 29-0A/-0B 29-0E 29-0F 29-0H 29-0J 29-0K 29-0 To select the model desired, click on the highlighted service number. D-5 S LIST NEW MODEL(S) ADDED FIRST ISSUE 6/76, COLUMN # FIRST ISSUE
More informationIllustrated Parts List
Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel
More information