The Pocket Guide To Insulation August 2013

The Pocket Guide To Insulation August 2013

Introduction Knauf Insulation is the UK s leading manufacturer of insulation products, including: Earthwool glass and rock mineral wool Polyfoam ECO extruded polystyrene (XPS) and Floorfoam extruded polyethylene (XPE) Our knowledge and experience has allowed us to create the industry s widest range of products for thermal, acoustic and fire protection insulation. This means we can offer sound, practical advice, giving you confidence you ve been recommended the best possible insulation system for your project. This guide shows only a selection of our insulation products. For further information on our wider product range please contact 08700 668 660. Knauf Insulation s core glass and rock mineral wool range is now unified under one name - Earthwool. Earthwool utilises the groundbreaking binding process of ECOSE Technology to create a new generation of products with new levels of usability and sustainability. ECOSE Technology is a revolutionary, new, formaldehyde free binder technology, based on rapidly renewable materials instead of petro-based chemicals. It reduces embodied energy and delivers superior environmental sustainability. ECOSE Technology was developed for glass and rock mineral wool insulation, but offers the same potential benefits to other products where resin-substitution would be an advantage. 2

Contents Roofs Walls Floors Roofs Cold roof 4-5 Warm roof 6 Walls Masonry cavity walls 7-9 Timber frame walls 10 Masonry party walls 11 Solid masonry walls - refurbishment 12 Timber stud partition walls 13-14 Metal stud partition walls 15-16 Floors Suspended timber floor - thermal 17 Suspended timber floor - acoustic 18 Solid floor 19 Separating floor 20 Useful Information 21-24 Further information 26 3

Cold Roof: Ventilated Earthwool Loft Roll 44 Earthwool Loft Roll 44 Joist Generic BRE Green Guide Rating Plasterboard A flexible, glass mineral wool roll used for the thermal insulation of pitched roofs. Earthwool Loft Roll 44 is normally laid in two layers between and over the ceiling joists. The insulation should be taken over the wall plate to link up with the wall insulation. All joints between the insulation to be close butted. The insulation should be pushed up tight against the roof tile underlay if no ventilation is required or tight to the eaves ventilator, taking care not to block the ventilation air path if ventilation is required. Thermal cond. Dimensions - Earthwool Loft Roll 44 R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (m) (mm) (m 2 ) 270 0.044 6.10 3.85 1200 4.62 200 0.044 4.50 5.20 1140 5.93 170 0.044 3.85 7.03 1140 8.01 150 0.044 3.40 8.05 1140 9.18 100 0.044 2.25 12.18 1140 13.89 Typical U-values for cold pitched roofs: ventilated Product (mm) U-values Between Joists Over Joists (W/m 2 K) Earthwool Loft Roll 44 100 270 0.12 Earthwool Loft Roll 44 100 200 0.15 Earthwool Loft Roll 44 100 170 0.16 Earthwool Loft Roll 44 100 150 0.17 4 * Joist sizes assumed to be 100 x 48mm at 600mm centres (8% bridging plus 1% for cross noggins). The U-values have been calculated in accordance with BS EN ISO 6946:2007. www.knaufinsulation.co.uk

Cold Roof: Ventilated Earthwool Loft Roll 270mm Earthwool Loft Roll 270mm Joist Generic BRE Green Guide Rating Plasterboard A flexible glass mineral wool roll used for the thermal insulation of pitched roofs. Earthwool Loft Roll 270mm is laid between the joists. The insulation should be taken over the wall plate to link up with the wall insulation. All joints between the insulation to be close butted. The insulation should be pushed up tight against the roof tile underlay if no ventilation is required or tight to the eaves ventilator, taking care not to block the ventilation air path if ventilation is required. Thermal cond. Dimensions - Earthwool Loft Roll 270mm R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (m) (mm) (m 2 ) 270 0.044 6.10 3.85 600 x 2 4.62 270 0.044 6.10 3.85 400 x 3 4.62 Typical U-values for cold pitched roofs: ventilated Product (mm) U-value between and over joists* (W/m 2 K) Earthwool Loft Roll 270mm 270 0.16 * Joist sizes assumed to be 100 x 48mm at 600mm centres (8% bridging plus 1% for cross noggins). The U-value has been calculated in accordance with BS EN ISO 6946:2007 Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 5

Warm Pitched Roofs Earthwool Rafter Roll Vapour permeable membrane Earthwool Rafter Roll Generic BRE Green Guide Rating Knauf PIR Laminate/ Polyfoam ECO Floorboard Standard A glass mineral wool roll for thermal insulation between rafters. Earthwool Rafter Roll is designed for insulating between the rafters of pitched roofs in new build and existing buildings. It is easy to cut and friction fit between rafters. Earthwool Rafter Roll can be used either as a single or double layer between rafters, or as the first layer of a two layer system in combination with Knauf PIR Laminate or Polyfoam ECO Floorboard Standard. 6 Dimensions - Earthwool Rafter Roll Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (m) (mm) (m 2 ) 140 0.032 4.35 2.80 1200 3.36 125 0.032 3.90 3.20 1200 3.84 100 0.032 3.10 4.00 1200 4.80 85 0.032 2.65 4.60 1200 5.52 75 0.032 2.30 5.25 1200 6.30 50 0.032 1.55 7.90 1200 9.48 Typical U-values for warm pitched roofs U-values (W/m 2 K) (mm) *Knauf PIR Laminate (mm) Earthwool Rafter Roll 35 50 65 75 150 (2x75) 0.18 0.16 0.15 1.14 125 0.21 0.18 0.16 0.15 100 0.24 0.21 0.18 0.17 Note: Rafter sizes assumed to be 38mm wide at 600mm centres (6.3% bridging) and the same depth as the insulation. *Knauf PIR Laminate is available from Knauf Drywall. Typical U-values for warm pitched roofs U-values (W/m 2 K) (mm) Polyfoam ECO Floorboard Standard (mm) Earthwool Rafter Roll 50 65 75 100 150 (2x75) 0.17 0.16 0.15 0.13 125 0.19 0.18 0.17 0.15 100 0.22 0.20 0.19 0.17 Note: Rafter sizes assumed to be 38mm wide at 600mm centres (6.3% bridging) and the same depth as the insulation. www.knaufinsulation.co.uk

Masonry Cavity Walls Earthwool DriTherm Cavity Slab 32 Ultimate Plasterboard on dabs Internal block Earthwool DriTherm Cavity Slab 32 Ultimate External brickwork Generic BRE Green Guide Rating A semi-rigid slab made from glass mineral wool with a water-repellent additive used for the thermal insulation of masonry cavity walls. Earthwool DriTherm Cavity Slab 32 Ultimate is built in as work proceeds, with slabs closely butt jointed. Dimensions - Earthwool DriTherm Cavity Slab 32 Ultimate Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (mm) (mm) (m 2 ) 125 0.032 3.90 1200 455 2.18 100 0.032 3.10 1200 455 2.18 85 0.032 2.65 1200 455 2.73 75 0.032 2.30 1200 455 3.28 65 0.032 2.00 1200 455 5.46 50 0.032 1.55 1200 455 7.64 Insulation Typical U-values for masonry cavity walls Lightweight aircrete Standard aircrete High strength aircrete Medium density (mm) (l = 0.11) (l = 0.15) (l = 0.19) (l = 0.45) 125 0.20 0.20 0.21 0.22 100 0.23 0.24 0.25 0.26 85 0.26 0.27 0.28 0.30 Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 7

Masonry Cavity Walls Earthwool DriTherm Cavity Slab 34 Super Plasterboard on dabs Internal block Earthwool DriTherm Cavity Slab 34 Super External brickwork Generic BRE Green Guide Rating A semi-rigid slab made from glass mineral wool with a water-repellent additive used for the thermal insulation of masonry cavity walls. Earthwool DriTherm Cavity Slab 34 Super is built in as work proceeds, with slabs closely butt jointed. Dimensions - Earthwool DriTherm Cavity Slab 34 Super Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (mm) (mm) (m 2 ) 150 0.034 4.40 1200 455 2.73 125 0.034 3.65 1200 455 3.28 100 0.034 2.90 1200 455 4.37 75 0.034 2.20 1200 455 5.46 Insulation Dense Block Typical U-values for masonry cavity walls Medium block Lightweight aggregate Standard aircrete Medium density (mm) (l = 1.13) (l = 0.51) (l = 0.34) (l = 0.15) (l = 0.45) 300 (3x100) 0.11 0.11 0.11 0.10 0.10 200 (2x100) 0.16 0.16 0.16 0.15 0.15 150 0.20 0.20 0.19 0.18 0.18 125 0.24 0.23 0.23 0.21 0.20 100 0.28 0.28 0.27 0.25 0.24 75 0.36 0.35 0.34 0.31 0.29 www.knaufinsulation.co.uk 8

Masonry Cavity Walls Earthwool DriTherm Cavity Slab 37 Standard Plasterboard on dabs Internal block Earthwool DriTherm Cavity Slab 37 Standard External brickwork Generic BRE Green Guide Rating A semi-rigid slab made from glass mineral wool with a water-repellent additive used for the thermal insulation of masonry cavity walls. Earthwool DriTherm Cavity Slab 37 Standard is built in as work proceeds, with slabs closely butt jointed. Dimensions - Earthwool DriTherm Cavity Slab 37 Standard Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (mm) (mm) (m 2 ) 150 0.037 4.05 1200 455 4.37 125 0.037 3.35 1200 455 3.28 100 0.037 2.70 1200 455 4.37 85 0.037 2.25 1200 455 4.37 75 0.037 2.00 1200 455 4.37 65 0.037 1.75 1200 455 5.46 50 0.035 1.40 1200 455 6.55 Insulation Typical U-values for masonry cavity walls Lightweight aircrete Standard aircrete High strength aircrete Medium density (mm) (l = 0.11) (l = 0.15) (l = 0.19) (l = 0.45) 125 0.22 0.23 0.23 0.25 100 0.26 0.27 0.27 0.29 85 0.28 0.30 0.31 0.33 Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 9

Timber Frame Walls Earthwool FrameTherm Roll 32, 35 and 40 External brickwork Vapour permeable membrane Plywood sheathing Earthwool FrameTherm Roll between timber studs Vapour control layer 12.5mm plasterboard Generic BRE Green Guide Rating Cavity High performance glass mineral wool rolls used for the thermal insulation of timber frame walls, their manufactured size is designed to suit the most common timber stud spacing`s. Earthwool FrameTherm Rolls are simply `friction fitted` between timber studs in timber frame wall constructions. 10 Dimensions - Earthwool FrameTherm Roll R-value Length Width Area per roll (mm) (m 2 K/W) (mm) (mm) (m 2 ) Earthwool FrameTherm Roll 32 140 4.35 2.80 2x570 3.19 90 2.80 4.50 2x570 5.13 Earthwool FrameTherm Roll 35 140 4.00 3.90 2x570 4.45 90 2.55 6.00 2x570 6.84 Earthwool FrameTherm Roll 40 140 3.50 5.95 2x570 6.78 90 2.25 9.60 2x570 10.94 Typical U-values for prefabricated timber frame walls Membrane type Product U-values (W/m 2 K) (mm) Low e Vapour permeable 140 140 www.knaufinsulation.co.uk Masonry outer leaf Tile/timber clad outer Earthwool FrameTherm 32 0.22 0.27 Earthwool FrameTherm 35 0.23 0.28 Earthwool FrameTherm 40 0.25 0.30 Earthwool FrameTherm 32 0.26 0.28 Earthwool FrameTherm 35 0.27 0.29 Earthwool FrameTherm 40 0.31 0.32

NMANUFACTURED FOR USE I Party Walls Earthwool Masonry Party Wall Slab External Wall Internal block Earthwool Masonry Party Wall Slab Plasterboard on dabs Generic BRE Green Guide Rating Earthwool Masonry Party Wall Slab is a full fill thermal and acoustic solution for use in masonry cavity party walls between adjoining ROBUST DETAILSTM apartments, semi-detached and terraced houses. Earthwool Masonry Party Wall Slab can be used as part of a solution to achieve a zero effective U-value in party walls when using SAP 2009 for compliance with the 2010 Building Regulations. WALLS Earthwool Masonry Party Wall Slab is built in as work proceeds, with slabs closely butt jointed to fully fill the cavity. Dimensions - Earthwool Masonry Party Wall Slab Installed density R-value Length Width Area per pack (mm) (kg/m 3 ) (m 2 K/W) (mm) (mm) (m 2 ) 100 18.00 2.75 1200 455 6.55 50 18.00 2.05 1200 455 8.74 Knauf Insulation Party Wall solutions are suitable for use in Robust Details Walls. As we are developing solutions on an ongoing basis and the range of walls within the Robust Details Handbook is constantly evolving, the most up to date information regarding Knauf Insulation solutions to be used with Robust Details walls can be found by visiting knaufinsulation.co.uk/partywall Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 11

Solid Masonry Walls ThermoShell Internal Wall Insulation System Solid masonry wall Existing plaster EcoStud 95mm Earthwool EcoBatt 95mm Fixings Plasterboard ThermoShell Vapour Control Layer The ThermoShell IWI System is an internal wall insulation system designed for upgrading existing solid external walls. It consists of thermally engineered insulated studs and water repellent glass mineral wool insulation slabs. Thermal cond. Dimensions - EcoStud R-value Width Length (mm) (W/mK) (m 2 K/W) (mm) (mm) 95 n/a 2.54 50 2400 80 n/a 2.08 50 2400 65 n/a 1.63 50 2400 Dimensions - Earthwool EcoBatt Thermal cond. R-value Width Length (mm) (W/mK) (m 2 K/W) (mm) (mm) 130* 0.035 3.70 555 1200 95 0.032 2.95 555 1200 80 0.032 2.50 555 1200 65 0.035 1.85 555 1200 *Multiple layers Earthwool EcoBatt and EcoStud products are only available as part of the ThermoShell Internal Wall Insulation System. The ThermoShell Internal Wall Insulation System is restricted to Approved Distribution Outlets and Approved ThermoShell IWI Installers. For information on how to become an Approved Distribution Outlet or Approved ThermoShell IWI Installer please contact your local Knauf Insulation Sales Representative. www.knaufinsulation.co.uk 12

Timber Stud Partition Earthwool Acoustic Roll Plasterboard Earthwool Acoustic Roll Timber stud Plasterboard Generic BRE Green Guide Rating 50mm Earthwool Acoustic Roll friction fitted between timber studs faced with 12.5mm Knauf Wallboard, achieves Building Regulations acoustic performance for internal walls (40dB). A flexible, resilient, glass mineral wool roll. Earthwool Acoustic Roll is simply friction fitted between timber studs at 600mm centres (400mm and 600mm centres for 100mm thickness). Dimensions - Earthwool Acoustic Roll Length Width Area per roll (mm) (m) (mm) (m 2 ) 100 9.17 2 x 600 11.00 100 9.17 3 x 400 11.00 75 12.50 2 x 600 15.00 50 13.00 2 x 600 15.60 25 10.00 4 x 600 24.00 Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 13

Timber Stud Partition Earthwool Flexible Slab Plasterboard Earthwool Flexible Slab Timber stud Plasterboard Generic BRE Green Guide Rating 50mm Earthwool Flexible Slab friction fitted between timber studs faced with 12.5mm Knauf Wallboard, achieves Building Regulations acoustic performance for internal walls (40dB). A semi-rigid rock mineral wool slab used for a wide range of thermal and acoustic applications. Earthwool Flexible Slab is simply friction fitted between timber studs at 400mm and 600mm centres. Dimensions - Earthwool Flexible Slab Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (mm) (mm) (m 2 ) 140 0.035 4.00 1200 600 2.16 140 0.037 3.75 1200 400 1.92 100 0.037 2.70 1200 600 3.60 100 0.037 2.70 1200 400 2.88 90 0.037 2.40 1200 600 3.60 70 0.037 1.85 1200 600 5.76 60 0.037 1.60 1200 600 5.76 60 0.037 1.60 1200 400 4.80 50 0.037 1.35 1200 600 7.20 50 0.037 1.35 1200 400 5.76 www.knaufinsulation.co.uk 14

Metal Stud Partition Earthwool Acoustic Roll Plasterboard Earthwool Acoustic Roll Metal stud Plasterboard Generic BRE Green Guide Rating 50mm Earthwool Acoustic Roll friction fitted between metal studs faced with 12.5mm Knauf Wallboard, achieves Building Regulations acoustic performance for internal walls (40dB). A flexible, resilient, glass mineral wool roll. Earthwool Acoustic Roll is simply friction fitted between metal studs at 600mm centres (400mm and 600mm centres for 100mm thickness). Dimensions - Earthwool Acoustic Roll Length Width Area per roll (mm) (m) (mm) (m 2 ) 100 9.17 2 x 600 11.00 100 9.17 3 x 400 11.00 75 12.50 2 x 600 15.00 50 13.00 2 x 600 15.60 25 10.00 4 x 600 24.00 Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 15

Metal Stud Partition Earthwool Flexible Slab Plasterboard Earthwool Flexible Slab Metal stud Plasterboard Generic BRE Green Guide Rating 50mm Earthwool Flexible Slab friction fitted between metal studs faced with 12.5mm Knauf Wallboard, achieves Building Regulations acoustic performance for internal walls (40dB). A semi-rigid rock mineral wool slab used for a wide range of thermal and acoustic applications. Earthwool Flexible Slab is simply friction fitted between metal studs at 400mm and 600mm centres. Dimensions - Earthwool Flexible Slab Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (mm) (mm) (m 2 ) 140 0.035 4.00 1200 600 2.16 140 0.037 3.75 1200 400 1.92 100 0.037 2.70 1200 600 3.60 100 0.037 2.70 1200 400 2.88 90 0.037 2.40 1200 600 3.60 70 0.037 1.85 1200 600 5.76 60 0.037 1.60 1200 600 5.76 60 0.037 1.60 1200 400 4.80 50 0.037 1.35 1200 600 7.20 50 0.037 1.35 1200 400 5.76 www.knaufinsulation.co.uk 16

Suspended Timber Floor - Thermal Earthwool Loft Roll 40 Chipboard Earthwool Loft Roll 40 Timber joist Support netting Generic BRE Green Guide Rating U-value of 0.22 W/m 2 K - 150mm of Earthwool Loft Roll 40 friction fitted between timber joists (typical U-value for an extension with P/A of 0.45), alternatively use 140mm of Earthwool Flexible Slab. A flexible, resilient, glass mineral wool roll. Unroll the netting and staple it to the sides of each joist so as to form a support cradle. Friction fit the required thickness of Earthwool Loft Roll 40 between the joists. There should be no air gap between the insulation and the underside of the floor deck. Joists running parallel with masonry walls should be spaced away from the wall to allow no less than 35mm of insulation to be placed next to the wall. Dimensions - Earthwool Loft Roll 40 (Combi-Cut) Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (m) (mm) (m 2 ) 200 0.040 5.00 4.85 1140 2x570/3x380 150 0.040 3.75 7.53 1140 2x570/3x380 100 0.040 2.50 11.25 1140 2x570/3x380 5.53 8.58 12.83 Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 17

Suspended Timber Floor - Acoustic Earthwool Building Slab / Flexible Slab Chipboard Timber joist Earthwool Building Slab/ Flexible Slab Generic BRE Green Guide Rating Plasterboard 100mm Earthwool Building Slab/ Flexible Slab friction fitted between timber joists faced with 12.5mm Knauf Wallboard, achieves Building Regulations acoustic performance for internal floors (40dB). A semi-rigid rock mineral wool slab used for a wide range of thermal and acoustic applications. Earthwool Building Slab / Flexible Slab are cut to friction fit between joists. The insulation should rest on the ceiling, between the last joist and the wall, cut insulation to size and friction fit in the gap. Dimensions - Earthwool Building Slab Thermal cond. R-value Length Width Area per pack (mm) (W/mK) (m 2 K/W) (mm) (mm) (m 2 ) 100 0.037 2.70 1200 600 3.60 RS33 RS45 70 0.037 1.85 1200 600 5.76 60 0.037 1.60 1200 600 5.76 50 0.037 1.35 1200 600 7.20 40 0.037 1.05 1200 600 8.64 100 0.035 2.85 1200 600 3.60 75 0.035 2.10 1200 600 4.32 60 0.035 1.70 1200 600 5.76 50 0.035 1.40 1200 600 7.20 40 0.035 1.10 1200 600 8.64 30 0.035 0.85 1200 600 11.52 25 0.035 0.70 1200 600 14.40 For Earthwool Flexible Slab product data, please see page 16 www.knaufinsulation.co.uk 18

Solid Floor Polyfoam ECO Floorboard Standard 25mm Polyfoam ECO Floorboard Standard Polyfoam ECO Floorboard Standard Slip layer, or alternative position for dpm dpm Extruded polystyrene boards for the thermal insulation of floors. Polyfoam ECO Floorboard Standard has a GWP of less than five. A solid concrete ground floor slab cast on insulation on a damp proof membrane laid over blinded hardcore. Alternatively concrete floor slab cast on a damp proof membrane laid over the insulation. Dimensions - Polyfoam ECO Floorboard Standard Thermal conductivity R-value Min. compressive strength Length Width (mm) (W/mK) (m 2 K/W) (kpa) (mm) (mm) 100 L J 0.033 3.00 200 1250 600 75 SE 0.033 2.25 200 2500 600 65 SE 0.033 1.95 200 2500 600 50 SE 0.033 1.50 200 2500 600 35 SE 0.033 1.05 200 2500 600 25 SE 0.033 0.75 200 2500 600. Polyfoam ECO Floorboard Extra and Polyfoam ECO Floorboard Super are also available. Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 19

Separating Floors Floorfoam 65mm sand/cement screed, or 40mm liquid screed Floorfoam Easy Edge Strip Floorfoam 10mm Precast concrete planks Metal/plasterboard ceiling system A closed cell extruded polyethylene foam available in roll form. The closed cell nature of Floorfoam makes it excellent at cushioning vibrations; it can be used in a wide variety of separating floor constructions. Floorfoam has been developed specifically to comply with Building Regulation requirements for a resilient layer in separating floors and is suitable for use with either traditional or liquid screed solutions and has been successfully tested on both. Dimensions - Floorfoam Length Width Area per pack (mm) (m) (mm) (m 2 ) 5 93.75 1200 112.50 10 52.00 1200 62.40 www.knaufinsulation.co.uk 20

Material Quantities Walls Brick/block masonry cavity wall construction - per 10m 2 Bricks 65mm x 100mm x 215mm - 600 Blocks 215mm x 100mm x 440mm - 100 Cavity ties - 25 per 10m 2 or 2.5m 2 Mortar (4:1) Sand 768kg Cement 192kg Insulation product - Earthwool DriTherm Cavity Slabs 37/34/32 19 per 10m 2 Solid walls 1000-65mm x 100mm x 215mm bricks is sufficient for: Approximately 17.00m 2 of 100mm (4 ) thick wall in stretcher bond Approximately 8.50m 2 of 210mm (9 ) thick wall in stretcher bond Mortar (4:1) per 100 bricks Sand 926kg Cement 263kg Number of tie wires - 43 Site mixed concrete per m 3 (1:2:4) Cement - 304kg 13 x 25kg bags Sharp sand - 608kg 25 x 25kg bags Aggregate - 1216kg 49 x 25kg bags Water - 177 litres Plaster - coverage per 25kg bag Universal board finish - 14m 2 at 2mm Bonding - 2.75m 2 at 11mm Universal one coat - 2.25m 2 at 13mm Plasterboards Board size - 2400mm x 1200mm x 9.50mm Board area - 2.88m 2 50 nails per board - 150mm x 400mm centres Typical board weight - 18.00kg (approximate) Board size - 2400mm x 1200mm x 12.50mm Board area - 2.88m 2 50 nails per board - 150mm x 400mm centres Typical board weight - 24.00kg (approximate) Customer Service (Sales) Tel: 0844 800 0135 Technical Advice and Support Centre Tel: 01744 766666 21

Material Quantities Walls (cont.) Timber stud partition - 38mm studs at 400mm centres (per 10m 2 ) Timber studs - 43 linear metres Plasterboard (12.5mm) - 7 sheets Plaster finish coat - 36kg Fixing with nails - 357 Fixing with screws - 180 Insulation product - 50mm Earthwool Acoustic Roll One roll = 15.60m 2 External rendering Typical mixes by volume 1:1:5/6 - cement/lime/sand 1:5/6 - cement/sand - plus plasticiser Undercoat - 8-16mm Topcoat - 6-10mm Roofs Pitched roof insulated at ceiling level Number of Earthwool Loft Roll 44 rolls required U-value of roof 0.16W/m 2 K Roll thickness Ceiling area (m 2 ) (mm) 20 30 40 50 60 70 80 100 2 2 3 2 3 3 4 4 5 4 5 5 5 6 170 3 3 4 4 5 5 7 7 8 8 9 9 10 10 38 mm joists at 600mm centre 38 mm joists at 400mm centres Pitched roofing materials - per 10 m 2 Marley Modern roof tiles 420mm x 330mm Tile lap 100mm 107 tiles per 10m 2 Batten gauge 338mm Battens 38mm x 25mm - 450mm centres - 29 linear metres of battens per 10m 2 Battens 50mm x 25mm - 600mm centres - 31 linear metres of battens per 10m 2 Tile nails 50mm x 3.50mm (minimum 15mm penetration into rafter) www.knaufinsulation.co.uk 22

Material Quantities Roofs (cont.) Length (mm) Plain wire Slate nails - quantity per kg Galvanised wire Copper nail Zinc nail 28.50 325 305 325 415 34.40 286 256 254 292 50.80 242 224 194 200 Floors Block paving - per 10 m 2 500 pavers - 200mm x 100mm Sub base - 100mm crusher run - 2 tonnes (80 x 25kg bags) Bedding - 50mm sharp sand - 0.90 tonnes (36 x 25kg bags) Tongue and groove softwood floor boards - joists at 600mm centres - per 10m 2 Board size - 22mm x 125mm (120mm coverage) 84 linear metres 280 oval or lost head nails - 3mm x *55mm (min) 380 screws - *55mm (min) x 8 s * Board thickness x 2.5 Chipboard (P5) flooring - joists at 600mm centres - per 10m 2 Board size 2400mm x 600mm x 22mm 1.44m 2 per board 7 boards per m 2 Number of nails or screws 250 at 200mm fixing centres 111 at 300mm fixing centres Nails -10 gauge annular ring shank - length *55mm (min) Chipboard screws - *55mm (min) x 8 s * Board thickness x 2.5 PVA adhesive - 1.30kg/10m 2 Pre treated floor decking - joists at 600mm centres - per 10m 2 Board size - 32mm x 125mm 5mm gap between boards 77 linear metres 256 galvanised or 75mm decking screws 23

Notes Miscellaneous Standard nails Wire nails Length (inches) Gauge Number per kilo 1 15 1927 1.5 12.5 695 2 11.5 398 3 10.25 233 3 9 152 3.5 8 108 4 6 69 4.5 5 53 5 4 40 5.5 3 31 6 2 24 24

Notes 25

Further information from Knauf Insulation At Knauf Insulation our philosophy is provide you the customer with help and assistance whenever, and wherever possible, in a user friendly and accessible way. Your local Area Sales Manager can be contacted to provide help and assistance whatever the problem, alternatively help is just a phone call away as direct contact can be made with our Technical Advice and Support Centre (TASC) on 01744 766666, where expert staff are on hand to provide advice and guidance enabling you to offer your customer a solution that meets their requirements. For specific product availability and delivery order enquiries our Customer Services team can be contacted on 0844 800 0135. Our website contains comprehensive information on our complete range of products and solutions. The website also provide access to: Our online academy www.insulationacademy.com Downloadable PDFs of our literature Case studies News Press releases Videos The website will be continually developing and improving, and will always contain the most up-to-date information on our products and solution, so log on to www.knaufinsulation.co.uk today. 26

Insulation made with feel good factors Award-winning ECOSE Technology Manufactured using a bio-based technology free from formaldehyde Made using a high content of recycled materials Awarded Eurofins Gold Standard for Indoor Air Quality Excellent fire, thermal and acoustic performance No artificial dyes or colourings Easier to cut and less dusty compared to our traditional mineral wool www.knaufinsulation.co.uk/pgbec0413 KINE1826ADV - V0413

All rights reserved, including those of photomechanical reproduction and storage in electronic media. Commercial use of the processes and work activities presented in this document is not permitted. Extreme caution was observed when putting together the information, texts and illustrations in this document. Nevertheless, errors cannot quite be ruled out. The publisher and editors cannot assume legal responsibility or any liability whatever for incorrect information and the consequences thereof. The publisher and editors will be grateful for improvement suggestions and details of errors pointed out. Knauf Insulation PO Box 10 Stafford Road St Helens Merseyside WA10 3NS www.knaufinsulation.co.uk info.uk@knaufinsulation.com Ref: KINE1070GID - V0813 Customer Service (Sales) Tel: 0844 800 0135 Fax: 01744 612007 E-mail: sales.uk@knaufinsulation.com www.knaufinsulation.co.uk Technical Advice and Support Centre Tel: 01744 766666 Fax: 01744 766667 E-mail: technical.uk@knaufinsulation.com Literature Tel: 08700 668 660 Fax: 0870 400 5797 E-mail: info.uk@knaufinsulation.com