EASA Part-66 Category B1.1 Licence
Agenda Introduction to Shannon Aerospace Lufthansa Technik EASA 147 Training Accommodation Lifestyle
Shannon Aerospace was founded by GPA, Swissair and Lufthansa in 1992. The Company has been a wholly owned subsidiary of the Lufthansa Technik group since 2002. Its excellent location and well trained personnel make Shannon Aerospace one of the best qualified facilities for Base maintenance services from North America and Europe. Shannon Aerospace has five maintenance lines with the corresponding workshops and two paint bays.
Lufthansa Technik (LHT) Overhaul Facilities Shannon Aerospace is a 100% subsidiary of Lufthansa Technik AG, the world's leading MRO provider with its mainbase in Hamburg, Germany. Shannon Aerospace LHT Frankfurt LHT Hamburg LHT Berlin LHT Malta Lufthansa Technik is the leading manufacturer independent provider of maintenance, repair, overhaul and modification services for civil aircraft LHT Budapest LHT Sofia Ameco Beijing LHT Philippines The company was formally established in 1994 as a wholly owned subsidiary of Deutsche Lufthansa AG
Shannon Aerospace Total floor area: 35,600 square metres 5 Heavy Maintenance Bays: 12,370 square metres 2 Painting Bays: 4,664 square metres Workshops/Stores: 9,033 square metres Offices: 3,653 square metres Additional Workshops (added in 1999): 3,600 square metres
Shannon Aerospace Aviation Training Shannon Aerospace is an EASA Part 147 approved maintenance Training organisation. The Aviation Training Department is one of the most experienced and respected in the industry, providing Basic Training, Type Training and EASA Part 145 Mandatory Continuation Training. Shannon Aerospace also design and execute a variety of training products and services to the marketplace.
Our Training Facilities Shannon Aerospace is a technologically advanced training School with outstanding training facilities and instructors who are experts in the industry. It is the perfect learning environment.
The European Aviation Safety Agency (EASA) The European Aviation Safety Agency (EASA) is a European Union (EU) agency with regulatory and executive tasks in the field of civilian aviation safety. It was set up to promote the highest possible standards of safety and environmental protection in civil aviation Under EASA 147, the training for maintenance personnel are controlled by two regulations: Part 66: Licenced Maintenance Personal Requirements Part 147: Approved Maintenance Training Organisations.
EASA B1.1 Aircraft Maintenance Engineer As an Part 147 approved Training Organization we provide: Part 66 Category A Line Mechanic (airframes and Engines) Part 66 Category B1 Licensed Engineer (mechanical, airframes & engines) Part 66 Category B2 Licensed Engineer (avionics).
EASA B1.1 Aircraft Maintenance Engineer The Shannon Aerospace Maintenance Engineers course is fully approved by EASA and conducted under our EASA Maintenance Training School Approval EI 147 001, Course Content Year 1: Theoretical Training The syllabus and examination standard is given in the EASA Part 66. The duration of the training is two years 50% Theory and 50% Practical Training. The course is conducted in 13 Modules with a multiple choice exam at the end of each module. The Modules are: Mathematics Physics Electrical Fundamentals Electronic Fundamentals Digital Techniques Electronic Instrument Systems Materials and Hardware Maintenance Practices Basic Aerodynamics Human Factors Aviation Legislation Aeroplane Aerodynamics Structures and Systems Gas Turbine Engine Propeller
EASA B1.1 Aircraft Maintenance Engineer Year 2: Practical Training This is spent converting the knowledge gained in year 1 into Practical Application. Phase 1 Firstly in dedicated training workshops you will gain the hand skills and knowhow to use the tools and instrumentation required to safely maintain aircraft. Phase 2 Practical training is conducted in the busy environment of live aircraft maintenance. You will be actively involved in actual maintenance activities on A320, B737 and B757/767 aircraft carrying out engine replacements, cabin refurbishment and structural repair, flight control and landing component replacements. You will be working alongside experienced engineers who will support you during this phase and bring you to the competency levels expected by industry leaders such as Lufthansa Technik. You will also gain substantial insight of the management of aircraft overhaul in one of the world s leading MRO providers.
A Growing Industry The airline industry will see solid long-term growth over the next 20 years with yearly passenger totals climbing from 713 million to nearly 1.3 billion, the US government recently predicted. This will require more technical training centres of high-calibre such as Shannon Aerospace and it will require that more aviation maintenance engineers be trained and retrained in the new aircrafts that are coming on stream as there will be more jobs available and more dedicate engineers be required to fill these jobs. Shannon Aerospace is one of the most experienced and respected training organisation within in the industry. This gives great possibilities for worldwide employment.
Testimonials Training with Shannon Aerospace was daunting at first, but the instructors were very supportive and made things very achievable. It still took hard work but the friendly atmosphere made it a great place to learn. Salim Sayed Hasan, Aircraft Maintenance Engineer Student I have found that Shannon Aerospace trained people to be very capable and competent in their chosen professions, Shannon Aerospace Training on a C.V stands out for me. Brian Power, Chief Technical Officer Aldus Aviation Ltd. I know that my training with Shannon Aerospace is the foundation that has given me the opportunity to take responsible roles in aircraft asset management. Des Egan, Airworthiness Engineer, CAMO, Eirtech Aviation Services.
Ireland Long history in Aviation Historically, the first trans-atlantic flight between Europe and America came through Shannon airport. Ireland's aviation industry today compromises over 230 companies employing a highly skilled workforce. Aerospace in Ireland combines commercial airlines, air traffic and fleet management, manufacturing, international services and back office activities. Other dominant sectors include Leasing and financial services, 50% of the worlds passenger aircraft are leased out of Ireland Airports, research and development. Manufacture and supply of equipment and components. Aviation Education Software development and validation. Human resource. Maintenance services.
Ireland Long history in Aviation Shannon International Airport Shannon International Airport is unique both in its location and its place in the history of world aviation. Of all European Airports it is situated at the most western point, making it the ideal stepping stone between the old world and the new. Chosen for its geographical position as the transatlantic gateway between Europe and America, Shannon was designated as Ireland s Transatlantic Airport at its inception by the Irish Government.
Lifestyle and Tourism
Tourism The Shannon Region is one of Irelands most famous regions, from the breathtaking views of the Cliffs of Moher to the exciting nightlife of Limerick city. Cliffs of Moher The mystical Cliffs of Moher are truly revitalizing and touches all the senses. Just an hour away from Shannon Aerospace. Lahinch, County Clare On the west coast of Ireland and provides a friendly, safe and fun place to surf and socialise. The Ring of Kerry This is a tourist trail and part of the mystical & unspoilt region of Ireland. Its spectacular beauty is beyond question.
Limerick City Limerick is a desirable place to live in with its rich tradition in literature, culture, arts and music. Limerick is a great shopping location and boasts a diverse culture and arts scene where there s always something going on!
The Atlantic Coast The Atlantic coast, a short journey from Shannon Aerospace, provides a dramatic backdrop for many activities including hill walking, mountain biking, scuba diving, sailing, horse riding and surfing.
Be part of the world s most exciting industry Be trained by the best for the best