DIGITL IDICTORS S_DIL The electronic indicators are equipped with a linear sensor and an engraved scale glued on the measuring spindle. sensor replaces the gears. The analogic display is transformed into a digital display. The SYLVC electronic indicator program covers the entire range of mechanical indicators with resolutions 0.1 to 0.0001mm and measuring range up to 150mm, and with much better accuracy. Sylvac inductive measuring system (patented) Data output Power supply: Lithium battery 3V, Type CR 2032 Operational temperature: +5 to +40 C mm/inch conversion
S_Dial SUMMRY OF LL TYPES S233 S234 SIC LOG DVCED IP67 RGE 0.5 mm 0.8 mm 5 mm 12.5 mm 25 mm 50 mm 100 mm 150 mm RESOLUTIO 0.01 mm 0.001 mm MECHIC Diameter 8 mm h6 Diameter 25mm g7 Dove tail M1.4 contact point M2.5 contact point Rubber boot IP51 (IEC 60529) IP54 (IEC 60529) IP65 (IEC 60529) IP67 (IEC 60529) DIL Diameter 44 mm Diameter 60 mm Rotating Vertical display FUCTIOS mm/inch Preset Preset onmin/max Measuring direction Hold Min / Max / Delta Tolerances bsolute function (S) bsolute system* uto off nalog display Setting by PC Programmable menus Powered by connector Multiplication factor Ref I / II * description on page 5 905.4121 905.4125 905.4140 905.4521 905.4525 905.4540 905.4511 905.4515 905.4527 1) 1) 1) 1) 1) 1) 46 905.4321 905.4322 805.1201 805.1301 805.1401 805.1501 805.1601 805.1621 805.5307 805.5507 805.5305 805.5505 805.5625 1) Preset configuration only by PC
S_Dial SUMMRY OF LL TYPES DVCED LUETOOTH Smart O & O T LOG O T S_Dial PRO SIC RGE 0.5 mm 0.8 mm 5 mm 12.5 mm 25 mm 50 mm 100 mm 150 mm RESOLUTIO 0.01 mm 0.001 mm 0.0001 mm MECHIC Diameter 8 mm h6 Diameter 25 mm g7 Spring M1.4 contact point M2.5 contact point Rubber boot IP51 (IEC 60529) IP54 (IEC 60529) DIL Diameter 44 mm Diameter 60 mm Rotating FUCTIOS mm/inch Preset Preset on Min/Max Measuring direction Hold Min / Max / Delta Tolerances bsolute system* uto off nalog display LUETOOTH Smart Setting by PC Programmable menus Powered by connector Multiplication factor Ref I / II 805.5201 805.5301 805.5401 805.5501 805.5601 805.5621 805.5641 805.5661 805.5671 805.5681 805.6301 805.6501 805.6621 805.6661 805.5306 805.5506 805.6306 805.6506 805.6307 805.6507 805.8601 805.8701 805.8602 805.8702 805.8501 805.8502 805.8661 * description on page 5 47
Digital test indicators DESCRIPTIO S_Dial S234 Digital and analog display Water and coolant resistant IP65 Data output RS 232 combined with external power utomatic switch OFF Stem Ø 8 mm and dovetail back Rotating display over 360 Digital display LCD, Height of digits 6 mm Polyamide case, rotating display over 360 Zero setting by turning the case nalog display 926.6821 905.4516 Measuring insert with tungsten carbide ball Ø 2 mm, movable over 270, interchangeable, M 1.4 926.5132 48
Digital test indicators S_Dial S234 DIMESIOL DRWIG 16 1.6 44 1.5 13.3 59.5 1.6 67 42.5 8.25 60 1.6 8 X 5:1 L 9.2 X 37 TECHICL SPECIFICTIOS Measuring range Probe length mm mm Max Error fe µm Hysteresis fu µm Resolution mm Repeatability µm Measuring force Weight Protection rating according to IEC 60529 S_Connect : Power Zero setting min / max / delta display nalog scale range ratio Selection of resolution Preset 1) ± 1 digit 2) see cables chapter 905.4321 905.4322 0.8 0.5 12.5 36.5 10 10 3 1) 4 1) 0.001 0.001 3 3 0.13 ± 15% 0.07 ± 15% 75 75 IP65 US / RS232 / Wireless 2) max 99.999 49
Digital test indicators S_Dial S234 DISPLY Direct mm/inch conversion nalog display Min/max/delta mode nalogic resolution display Zero setting SIC ISTRUMET Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Stem Ø 8 mm PPLICTIOS Run-out measurement Checking the alignment on milling machine. Perpendicularity measurement with a S234 mounted on a Hi_Gage OE 50
51
Mini digital indicators DESCRIPTIO S_Dial S233 Compact, small diameter (Ø44 mm) Water and coolant resistant, protection rating IP65 according to IEC 60529 Data output RS 232 combined with external power supply. Interchangeable contact point M2.5 Clamping stem Ø 8-h6 of hardened and ground stainless steel. Dovetail back utomatic power shut down Standard nalog Vertical Polyamide case, fixed display Digital display LCD, Height of digits 6 mm Clamping Ø 8-h6 Stainless steel measuring pin, ground 926.6821 905.4516 Interchangeable contact point, stainless steel with TC ball Rubber boot on protected version 926.5132 52
Mini digital indicators DIMESIOL DRWIGS S_Dial S233 Standard nalog Vertical S = standard P = protected 53
Mini digital indicators TECHICL SPECIFICTIOS S_Dial S233 Measuring range mm Display 90 nalog scale Resolution mm Execution 3) Max. Error fe µm Repeatability µm Measuring force Zero setting REL and S measurement Resolution selection PRESET = (max. 130 mm) Min / max / delta display Selection of measuring direction S_Connect : Power IP rating 905.4140 905.4540 905.4511 905.4515 5 5 5 5 --- --- --- --- 0.01 0.001 0.001 0.001 S S S P 10 1) 5 4 4 2 2 2 2 0.50-0.65 2) 0.50-0.65 2) 0.50-0.65 2) 0.60-1.20 2) --- --- --- --- --- --- --- --- --- US / RS232 / Wireless 4) IP65 Measuring range nalog scale Resolution Execution 3) mm mm Max. Error fe µm Repeatability µm Measuring force Zero setting REL and S measurement Resolution selection PRESET = (max. 130 mm) Min / max / delta display Selection of measuring direction Multiplication factor S_Connect : Power IP rating 1) ± 1 digit 2) Values ± 20%, indicator in vertical position, outgoing measuring spindle 3) S = Standard P = Protected 4) see cables chapter 905.4121 905.4125 905.4521 905.4525 905.4527 12.5 12.5 12.5 12.5 12.5 --- --- --- --- --- 0.01 0.01 0.001 0.001 0.001 S P S P S 10 1) 10 1) 5 5 5 2 2 2 2 2 0.5-0.90 0.6-1.3 0.5-0.90 0.6-1.3 0.5-0.90 --- --- 54 --- --- US / RS232 / Wireless 4) IP65
Mini digital indicators S_Dial S233 SIC ISTRUMET Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments with resolution 0.001 mm MESURIG FORCE FOR RGE 12.5 mm Standard Low 1) High 1) S 0.5-0.90 0.6-1.3 P 0.35-0.50 --- 1.80-2.3 --- Tolerance ±20%, indicator in vertical position, spindle in outgoing measurement. 1) on request PPLICTIOS Checking of an internal Ø with a mechanical device Measurent of the vertical displacement of an element Measurement of internal chamfer 55
DESCRIPTIO SIC Robust construction Water and coolant resistant Standard functions (mm/inch, preset, direction of measurement) utomatic wake-up and sleeping mode (S.I.S system), absolute System* Lifting cap PROXIMITY data output Version 0.001 resolution Version 0.01 resolution Programmable according to your needs Plastic case External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 Reinforced clamping shaft 926.6721 926.6723 926.6821 905.4516 Interchangeable contact point M2.5, stainless steel with TC ball 926.5133 926.5132 * description on page 5 56
DIMESIOL DRWIGS SIC Ø12 C C 19 19 n 8h6 S 2 Ø4 Ø5 (150mm) TECHICL SPECIFICTIOS 805.1201 805.1301 805.1401 805.1501 805.1601 805.1621 Measuring range mm 12.5 12.5 25 25 50 50 Resolution mm 0.01 0.001 0.01 0.001 0.01 0.001 Max. Error fe µm 10 1) 4 10 1) 5 20 1) 7 Repeatability IP rating µm 2 IP51 56.7 69.4 121 66.1 79 142 C 36.6 49.4 88 S_Connect : Proximity / Power Programmable by PC US / RS232 / Wireless Standard functions (customized by PC) mm/inch, preset 2) (max 999.999), direction of measurement 1) ± 1 digit 2) Preset configuration only by PC SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments 0.001 mm Standard Low 3) High 3) 57 S 12.5 S 25 S 50 0.65-0.90 0.65-1.15 1.4-2.9 0.4-0.55 0.45-0.9 --- 1.0-1.6 0.9-1.8 --- Tolerance ± 20%, spindle in outgoing measurement position. 23 on request
DESCRIPTIO DVCED Robust construction Water and coolant resistant ew technology with configurable menus road choice of functions (MI/MX/DELT, TOL, Factor, PRESET, UTO OFF, etc.) utomatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 3 µm PROXIMITY data output Lifting cap Large display with integrated LEDs tolerances Optional lifter luminium case rotating display over 270 Programmable according to your needs External power supply and data transfer using one cable only Interchangeable contact point M2.5, stainless steel with TC ball Reinforced clamping shaft 926.6721 926.6723 926.6821 905.4516 926.5133 926.5132 Hardened steel clamping Ø 8-h6 * description on page 5 58
DIMESIOL DRWIGS DVCED Ø12 C 7 19 2 C 19 uttom view n 8h6 Ø4 Ø5 (150mm) 19 Ø58 S 12.5-25mm S 50-150mm TECHICL SPECIFICTIOS Measuring range Resolution Max. Error fe Repeatability IP rating C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 1) ± 1 digit 805.5201 805.5301 805.5401 805.5501 805.5601 805.5621 805.5641 805.5661 805.5671 805.5681 mm 12.5 12.5 25 25 50 50 100 100 150 150 mm 0.01 0.001 0.01 0.001 0.01 0.001 0.01 0.001 0.01 0.001 µm 10 1) 3 10 1) 4 20 1) 5 20 1) 6 20 1) 10 µm 2 mm 56.6 69.3 121 172 224 mm 66.1 79 142 244 349 mm 36.6 49.4 88 139 193 IP54 US / RS232 / Wireless mm/inch, ref I/II, preset (max 999.999) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments 0.001 mm Standard Low 2) High 2) 12.5 25 50 100 150 0.65-0.9 0.65-1.15 1.4-2.9 1.8-3.8 2.6-5.7 0.4-0.55 0.45-0.9 --- --- --- 1.0-1.6 0.9-1.8 --- --- --- Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 59
DESCRIPTIO DVCED IP67 Robust construction Water and coolant resistant Protection rating IP67 according to IEC 60529, even connected ew technology with configurable menus road choice of functions (MI/MX/DELT, TOL, Factor, PRESET, UTO OFF, etc.) utomatic wake-up and sleeping mode (S.I.S system), absolute System Maximum error of 3 µm PROXIMITY data output rake valve Large display with integrated LEDs tolerances Dust cover luminium case rotating display over 270 Programmable according to your needs External power supply and data transfer using one cable only Interchangeable contact point M2.5, stainless steel with TC ball Reinforced clamping shaft Hardened steel clamping Ø 8-h6 926.6721 926.6723 926.6821 905.4516 926.5133 926.5132 * description on page 5 60
DIMESIOL DRWIGS DVCED IP67 C P 12.5-25mm P 50mm TECHICL SPECIFICTIOS Measuring range Resolution Max. Error fe Repeatability IP rating C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 805.5305 805.5505 805.5625 mm 12.5 25 50 mm 0.001 0.001 0.001 µm 3 4 5 µm 2 mm 59.6 85.4 104.4 mm 78.4 100.2 175.4 mm 36.6 49.4 - IP67 US / RS232 / Wireless mm/inch, ref I/II, preset (max 999.999) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments 0.001 mm Standard Low 2) High 2) 61 P 12.5 P 25 P 50 0.7 1.4 0.65 1.8 0.9 2.8 --- --- --- --- --- --- Tolerance ± 20%, spindle in outgoing measurement position. 2) on request
DESCRIPTIO LUETOOTH SMRT Integrated data transmission Robust construction Water and coolant resistant ew technology with configurable menus road choice of functions (MI/MX/DELT, TOL, Factor, PRESET, UTO OFF, etc.) utomatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 3 µm PROXIMITY data output Large display with integrated LEDs tolerances Lifting cap Optional lifter luminium case rotating display over 270 Programmable according to your needs External power supply and data transfer using one cable only Reinforced clamping shaft Hardened steel clamping Ø 8-h6 926.6721 926.6723 926.6821 905.4516 Interchangeable contact point M2.5, stainless steel with TC ball * description on page 5 62
DIMESIOL DRWIGS LUETOOTH SMRT Ø12 C C 19 2 25.4 Ø4 Ø5 (150mm) 7 19 uttom view S 12.5-25 S 50-100 n 8h6 19 Ø58 7.5 TECHICL SPECIFICTIOS Measuring range Resolution Max. Error fe Repeatability IP rating C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 805.6301 805.6501 805.6621 805.6661 mm 12.5 25 50 100 mm 0.001 0.001 0.001 0.001 µm 3 4 5 6 µm 2 mm 56.6 69.3 121 172 mm 66.1 79 142 244 mm 36.6 49.4 88 139 IP54 US / RS232 / LUETOOTH Smart* mm/inch, ref I/II, preset (max 999.999) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock * Up to 8 instruments connected per dongle #981.7100 More informations on How to use luetooth leaflet SYL_1401_E_T SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate for instruments 0.001 mm Standard Low 2) High 2) 12.5 25 50 100 0.65-0.90 0.65-1.15 1.4 2.9 1.8 3.8 0.4-0.55 0.45-0.9 --- --- 1.0-1.6 0.9-1.8 --- --- Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 63
DESCRIPTIO LOG daptive analog display (up to 0.2 µm per segment) Robust construction Water and coolant resistant ew technology with configurable menus road choice of functions (MI/MX/DELT, TOL, Factor, PRESET, UTO OFF, etc.) utomatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 3 µm PROXIMITY data output Lifting cap Quick access to tolerances limits and analog resolution Large display with integrated LEDs tolerances and analog scale Programmable according to your needs External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 luminium case rotating display over 270 Reinforced clamping shaft 926.6721 926.6723 Interchangeable contact point M2.5, stainless steel with TC ball * description on page 5 926.6821 905.4516 64
7 19 58 7.5 25.4 25.4 12 66.1 59.5 C 7 Digital indicators DIMESIOL DRWIGS LOG 13 19 8h6 4 S 12.5-25 TECHICL SPECIFICTIOS 805.5307 805.5507 Measuring range Resolution Max. Error fe Repeatability IP rating C mm 12.5 25 mm 0.001 µm 3 4 µm 2 IP54 mm 56.6 69.3 mm 66.1 79 mm 36.6 49.4 S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) US / RS232 mm/inch, preset (max 999.999) min/max/delta, tolerances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate Standard Low 2) S 12.5 S 25 0.65-0.90 0.65-1.15 0.4-0.55 0.45-0.9 High 2) 1.0-1.6 0.9-1.8 Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 65
DESCRIPTIO LOG O LUETOOTH Integrated data transmission daptive analog display (up to 0.1 µm per segment) 0,1 µm resolution Robust construction Water and coolant resistant ew technology with configurable menus road choice of functions (MI/MX/DELT, TOL, Factor, PRESET, UTO OFF, etc.) utomatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 1.8 µm Large display with integrated LEDs tolerances and analog scale PROXIMITY data output Lifting cap luetooth 4.0 built-in Quick access to tolerances limits and analog resolution Programmable according to your needs Rotating display over 270 External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 Interchangeable contact point M2.5, stainless steel with TC ball 926.6821 905.4516 926.6721 926.6723 * description on page 5 66
7 19 58 7.5 25.4 25.4 12 66.1 59.5 C 7 Digital indicators DIMESIOL DRWIGS LOG O LUETOOTH 13 19 8h6 4 S 12.5-25 TECHICL SPECIFICTIOS 805.6307 805.6507 Measuring range Resolution Max. Error fe Repeatability IP rating C mm 12.5 25 mm 0.0001 µm 1.8 2.2 µm 0.5 IP54 mm 56.6 69.3 mm 66.1 79 mm 36.6 49.4 S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) US / RS232 / LUETOOTH 4.0* mm/inch, preset (max 99.9999 or 999.999) min/max/delta, tolerances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock * Up to 8 instruments connected per dongle #981.7100 More informations on How to use luetooth leaflet SYL_1401_E_T SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate Standard Low 2) S 12.5 S 25 0.65-0.90 0.65-1.15 0.4-0.55 0.45-0.9 High 2) 1.0-1.6 0.9-1.8 Tolerance ± 20%, spindle in outgoing measurement position. 2) on request 67
DESCRIPTIO O & O LUETOOTH 0,1 µm resolution Robust construction Water and coolant resistant ew technology with configurable menus road choice of functions (MI/MX/DELT, TOL, Factor, PRESET, UTO OFF, etc.) utomatic wake-up and sleeping mode (S.I.S system), absolute System* Maximum error of 1.8 µm PROXIMITY data output Lifting cap Large display with integrated LEDs tolerances Programmable according to your needs External power supply and data transfer using one cable only Hardened steel clamping Ø 8-h6 luminium case rotating display over 270 Reinforced clamping shaft 926.6721 926.6723 Interchangeable contact point M2.5, stainless steel with TC ball Max error 1.8 µm Repeatability 0,5 µm 926.6821 905.4516 * description on page 5 68
DIMESIOL DRWIGS O & O LUETOOTH C TECHICL SPECIFICTIOS S 12.5-25 Measuring range Resolution Max. Error fe Repeatability IP rating C S_Connect : Proximity / Power Programmable by PC Standard functions (customized by PC) 805.5306 805.5506 805.6306 805.6506 mm 12.5 25 12.5 25 mm 0.0001 0.0001 0.0001 0.0001 µm 1.8 2.2 1.8 2.2 µm 0.5 mm 56.6 69.3 56.6 69.3 mm 66.1 79 66.1 79 mm 36.6 49.4 36.6 49.4 US / RS232 IP54 US / RS232 / LUETOOTH Smart* mm/inch, ref I/II, preset (max 999.999) min/max/delta, toleances, resolution, direction of measurement, multiplication factor, automatic or manual switch off, key lock * Up to 8 instruments connected per dongle #981.7100 More informations on How to use luetooth leaflet SYL_1401_E_T SIC ISTRUMET MESURIG FORCE Instrument according to technical specifications Lithium battery CR2032 included Instruction manual Calibration certificate Standard Low 2) High 2) 69 S 12.5 S 25 0.65-0.90 0.65-1.15 0.4-0.55 0.45-0.9 1.0-1.6 0.9-1.8 Tolerance ± 20%, spindle in outgoing measurement position. 2) on request
Digital indicators DESCRIPTIO Resolution of 0.1 µm road choice of functions (MI/MX/DELT, TOL, Facteur, PRESET, UTO OFF, etc.) Max error 1.5 µm / 50mm Constant measuring force (depending on model) Clamping stem ø8 or ø25 (depending on model) Mixed ceramic bearing / ball bearing system Measuring system with homing attery life : 2 years! Data output PROXIMITY and POWER S_Dial PRO SIC Data output PROXIMITY Large display with integrated LEDs tolerances luminium case rotating display over 270 50mm Customizable button Clamping ø25 - g7 Stainless steel chrome CR2032 battery or external power combined with data output POWER luminium tube Clamping ø8 - h6 Stainless hardened steel 100mm 25mm Lifter 926.6721 926.6723 926.6821 905.4516 926.5133 926.5132 70
PM 291.003.073 Ref. r: Ref. r: CH-1023 Crissier (Suisse) CH-1023 Crissier (Suisse) 805.8501 805.8701 vailable for: PM 291.005.075 vailable for: Rev. Date Visa Rev. Date Visa CH-1023 Crissier (Suisse) PM 291.001.071 PM Rev. 291.001.071 Date e-mail : vente @ sylvac.ch e-mail : vente @ sylvac.ch805.8502 805.8702-28-Jan-15 FSt - 28-Jan-15 CH-1023 FSt Crissier (Suisse) CH-1023 Crissier (Suisse) Rev. Date Visa 805.8601 805.8601 Visa 805.8661 sav @ sylvac.ch sav @ sylvac.ch e-mail : vente @ sylvac.ch Rev. Date Visa. - 28-Jan-15 FSt web site : www.sylvac.ch web site : www.sylvac.ch.. e-mail : vente @ sylvac.ch 805.8602-28-Jan-15 FSt sav @ sylvac.ch S_Dial PRO asic 25mmS_Dial Pro asic 50mm.. e-mail : vente @ sylvac.ch sav @ sylvac.ch 805.8602 web sav site @: sylvac.ch www.sylvac.ch - 28-Jan-15 FSt. web site : www.sylvac.ch web site : www.sylvac.ch.. Clamping Ø8 Clamping Ø25.. S_Dial PRO asic 100mm. S_Dial PRO asic 50mm S_Dial PRO asic 50mm.. Clamping Ø8. Clamping Ø8 Clamping Ø8.. Ref. r: vailable for: Ø59.5 PM 291.005.075 CH-1023 Crissier (Suisse) 805.8661 Ø59.5 Digital indicators 34.2 DIMESIOL DRWIGS 135 68 19 36 Ø58 25mm Ø25 Ø8h6 30.7 34.2 189 95 63 Toutes modifications réservées - nderungen vorbehalten - Changes without prior notice Toutes modifications réservées - nderungen vorbehalten - Changes without prior notice 7 34.2 Ø5 Ø58 50mm TECHICLS SPECIFICTIOS Ø25 Ø59.5 Ø25g7 30.7 34.2 189 95 19 63 7 Modèle:PM291_003_003_SS_RESS{.prt/asm} Dessin:291_003_073.drw Dimensions in mm Ø59.5 Ø58 50mm 34.2 Ø5 Ø25 Ø8h6 30.7 34.2 e-mail : vente @ sylvac.ch sav @ sylvac.ch web site : www.sylvac.ch Ø59.5 S_Dial PRO asic 100mm Clamping Ø8 Ø59.5 189 95 19 63 291 291 Rev. Date Visa. - 28-Jan-15 FSt S_Dial PRO. Ø25 Toutes modifications réservées - nderungen vorbehalten - Changes without prior notice Toutes modifications réservées - nderungen vorbehalten - Changes without prior notice 146 19 7 114 Modèle:PM291_002_002{.prt/asm} Dessin:291_002_072.drw Dimensions in mm 100mm 146 19 114 114 Ø58 34.2 Ø5 Ø25 Ø8h6 Ø25 Ø8h6 Ø8h6 30.7 Ø59.5 7 34.2 Toutes modifications réservées - nderungen vorbehalten - Changes without prior notice 7 Ø5 Dimensions in mm.. 34.2 34.2 Modèle:PM291_001_001_SS_RESS{.prt/asm} Dessin:291_001_071.drw Ø5 Ø5 SIC Ø59.5 Ø59.5 Ø59.5 Measuring range Resolution Max. Error fe Repeatability S_Connect : Proximity /Power Programmable by PC Clamping Spring Measuring force IP rating Standard functions (customizable by PC) 805.8501 805.8502 805.8601 805.8701 805.8602 805.8702 805.8661 mm 25 50 100 mm 0.0001 µm 1.3 1.5 2.2 µm 0.2 Toutes modifications réservées - nderungen vorbehalten - Changes without prior notice US / RS232 ø8 h6 ø25 g7 ø8 h6 1) 1) 1) 0.75-1.00 2) 0.30 2) 0.85-1.2 2) 0.40 2) 0.85-1.2 2) 0.40 2) 0.90-1.30 2) 1) Model without spring : Constant measuring force, use only in a vertical position 2) The values agree within ± 20% (vertical down, measuring rod outgoing) IP51 mm/inch, ref I/II, preset (max 99.9999) min/max/delta, tolerances, resolution, measuring direction, multiplier, automatic extinction/manual, keylock 7 ISTRUMET DE SE Instrument according to technical specifications Lithium battery CR2032 included Lifter included Manual Calibration certificate 71
PPLICTIOS S_Dial Measurement of a span with equipped with measuring ball probe 905.2207 Indicator, range 150 mm on stand mounted on a Sylvac PS15 bench LUETOOTH SMRT working in duplex mode and connected to D300S to measure concentricity, roundness, etc. connected to a PLC nalog used on bore gauge system luetooth indicators on a 4 points jig luetooth indicators on an ipad through the Sylvac T Smart pp 72
LIFTIG DEVICES S_Dial Lower lifting lever, type 905.4214 Upper lifting device type 905.4215 Pneumatic lifting device type 905.2218 Vacuum lifting device type 905.2220 Lifting device with photo-cable type 905.2216 Lifting device type 905.2214 Upper lifting lever type, 905.2215 73
S_Dial CCESSORIES Contact points M2.5 R5 905.2201 905.2202 905.2203 M2.5 M2.5 0.8 1 6 S233 S234 (905.4321) S234 (905.4322) 12,5-25 mm 50-150 mm S_Dial PRO asic Ø7.7 Ø11.5 905.2206 905.2204 905.2205 905.2207 905.2240 Short probe, TC ball 905.2241 Short standard probe, TC ball 905.2242 Short probe, TC ball 905.2243 Long probe, TC ball 905.2244 Long standard probe, TC ball 905.2245 Long probe, TC ball 74
S233 S234 905.2246 Clamping stem 905.2247 Clamping stem 905.2248 Spanner for probe 805.0214 1) 805.0215 1) 6.35 n 6.42 2.5 805.0213 1) 1) 12 18 11.5 18 1 Digital indicators S_Dial CCESSORIES 12,5-25 mm 50-150 mm Lifting device, range 12.5mm Lifting device, range 25mm Lug back 12 18 1) Except asic 75
CCESSORIES S_Dial S233 S234 12,5-25 mm 50-150 mm S_Dial PRO asic 905.2214 Lifting device 905.2215 Upper lifting device 905.2216 Lifting device with photo-cable 905.2218 Pneumatic lifting device with foot pedal 905.2217 Lifter only for 905.2218 905.2219 Pneumatic foot pedal for 905.2218 905.2220 Vacuum lifting device with foot pedal Ø4/2 L=2m 905.2227 Pressure controller Ø6/4 L=2m 905.2228 Vacuum foot pedal for 905.2220 76
CCESSORIES S_Dial S233 S234 12,5-25 mm 50-150 mm 905.2221 Dust protection for indicator, range 12.5 mm 905.2222 Dust protection for indicator, range 25 mm 905.2223 Depth measuring base 905.2261 Snap connector for pneumatic lifter x2 905.2262 Snap connector for pneumatic lifter x4 905.4211 Center lug back 77
CCESSORIES S_Dial Ø8 1) 1) 1) 905.4214 Lower lifting device, range 12.5 mm 10 4 S233 S234 12,5-25 mm 50-150 mm Upper lifting device for S (Standard) 905.4215 execution, except vertical type 905.4217 Pneumatic lifting device for standard type 1) used on range 20 mm max 78
79
Measuring stands DESCRIPTIO selection of universal measuring stands for fixing all probes, test indicators and dial gauges Clamping on Ø 8 mm, Ø 25mm or dovetail on magnetic stand rticulated arm Threaded column for height positioning accuracy Magnetic base Fine adjustment Granite base Ceramic base 80
Measuring stands TECHICL SPECIFICTIOS 908.1201 908.1209 C H 808.1204 ase ase dimensions xxh mm Central locking Column mm Clamping dimension mm Dist. Column.-meas. point. C mm Measuring range mm Total height mm Weight kg Fine adjustment 1) Gripping coefficient : 600 908.1201 908.1209 808.1204 808.1205 magnetic 1) Cast iron ceramic table granit grade 00 granit grade 00 70x46x65 85x85x25 210x300x60 210x300x60 --- --- --- --- Ø 8 Steel Ø 25 Ø 8 Steel Ø 35 Ø 8 Steel Ø 35 Ø 25 --- 78 115 115 --- 0-115 0-260 0-260 430 215 360 360 2.2 4.3 13.4 13.5 --- --- 81
Measuring stands TECHICL SPECIFICTIOS Superior Swiss Made supports with reinforced column and precision measuring arm ensuring optimal parallelism and rigidity reducing the measurement error due to the carrier. These measuring stands are equipped with a ring allowing fine height adjustment and a 00 grade granite base. 808.1206 808.1203 808.1202 808.1206 808.1207 808.1202 808.1203 808.1201 ase granit grade 00 granit grade 00 granit grade 00 granit grade 00 granit grade 00 ase dimensions xxh mm Central locking Column mm Clamping dimension mm Dist. Column.-meas. point. C mm Measuring range mm Total height mm Weight kg Fine adjustment 100X150X40 100X150X40 140x240x50 140x240x50 140x240x50 --- --- --- --- --- Steel Ø 25 Steel Ø 35 Steel Ø 35 Steel Ø 35 Steel Ø 35 Ø 8 Ø 8 Ø 25 Ø 8 Ø 8 70 70 115 70 115 0-190 0-260 0-260 0-260 0-260 270 340 340 340 340 2.9 4.3 6.6 6.5 6.6 C H 82