Honda CX500 & GL500 Forum



Similar documents
RULE # 1 is DON T mess with things that you don t know anything about! (Take them to a pro & pay them to fix it)

VW GOLF Mk4 TDI FRONT MOUNTING INTERCOOLER INSTALLATION INSTRUCTIONS

P7100 PUMP INSTALLATION INSTRUCTIONS Diesel Care & Performance Inc

Range Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual

Time needed: ~3h for lid replacement only. Add 1h for operation harness in lid and ~2h more for installing drive unit and cable harness in trunk.

PUMP MAINTENANCE SCHEDULE AND CHECKLISTS

Installing a new 928 Motorsports All-Aluminum Radiator

INSTALLATION INSTRUCTIONS FOR VW MK5

TABLE OF CONTENTS. Section 1 - Assembling your new pit bike.

BUGGY SETUP GUIDE. Volume GOKARTSUSA GY6 150, CN250. Buggy Setup Guide

STEERING HANDLEBAR/FRONT WHEEL/ FRONT SHOCK ABSORBER

2740 Whitten Rd Bldg 103 Memphis, TN Telephone

FRONT BUMPER INSTALLATION INSTRUCTIONS DODGE / MERCEDES SPRINTER

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129


FRONT WINDSHIELD SEAL INSTALLATION

Solstice/Sky Water Pump Replacement

Char-Lynn Spool Valve Hydraulic Motors. Repair Information. W Series Geroler Motors

Post Mount Light Installation*

3. Loosen 3 x grub screws in the Dec end cap and unscrew the cap and counterweight shaft. NEQ6 Belt Modification Kit.

TITAN Fuel Tanks. INSTALLATION INSTRUCTIONS G e n e r a t i o n V

INSTALLATION INSTRUCTIONS Air Spring Kit Ford F250/F-350 Single Wheel 2WD Ford F350 Dually 2WD IMPORTANT NOTES

M V Intake Manifold INSTALLATION INSTRUCTIONS

Front brakes (FN- 3), servicing

Ford 8N Tractor Overhauls - Carburetor

INSTALLATION INSTRUCTIONS Air Spring Kit Ford F250 Single Wheel 4WD Ford F350 Dually 4WD (2011 F350 Single Wheel 4WD use p/n 6113)

Overview PARTS LIST. B. Lever mounting base C. Flush handle assembly D. Grey/Blue float stop E. Grey float (Full Flush) F. Flush valve washer

Figure 2 The fan and shroud also needs to be removed for access to the four a/c compressor bolts and removal of the compressor from the top.

Installation instruction do88 Intercooler for Volvo S40 / V50 / C30

INSTALL/REMOVAL INSTRUCTIONS: WINDOW REGULATOR

How To Change Your Oil and Filter-Suzuki GS by BassCliff (a.k.a. BikeCliff)

2003 ACCORD - Automatic Transmission Removal

BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)

2008 ACCORD - Front Knuckle/Hub/Wheel Bearing Replacement (page 18-13)

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

Softail Oil Change. Tools

Installation Instructions

This kit may void factory warranty please check with manufacturer.

LG G5 Chassis Brace Gen 5 Camaro THE MOST POWERFUL HEADERS ON THE PLANET Brought to you by LG Motorsports

Sprinter Fuel Filter Installation

FUEL SYSTEM 2-1. Table of Contents. Fuel Removal Installation

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1/29/2008 DR70. Baja Motorsports Inc. P.O. Box Phoenix, AZ Toll Free: PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43

INSTALL/REMOVAL INSTRUCTIONS: WINDOW LIFT MOTOR

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

Important: Please read these instructions carefully and completely before starting the installation. TITAN Fuel Tanks

1.8 CRANKSHAFT OIL SEALS

SPRITE and BIGFOOT DESKTOP CNC MACHINE KIT ASSEMBLY INSTRUCTIONS

1993 SUSPENSION Volkswagen Front. EuroVan

SCREAMIN' EAGLE "HEAVY BREATHER" PERFORMANCE AIR CLEANER KIT

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)

Arctic Leash Instruction Manual Alaskan Products Company LLC.

Replacing the Gateway M320 Keyboard

Auto-belay Cable Replacement Process

MGB Chrome Bumper Conversion

SCREAMIN' EAGLE PRO TWIN CAM 110 (1800 CC) BOLT-ON CON- VERSION KIT

Navico-Northstar 2kW JRC Radar Package, Scanner Cable Removal and Replacement

SCREAMIN' EAGLE "HEAVY BREATHER" PERFORMANCE AIR CLEANER KIT

Not required for most applications Not required for most applications High pressure ( provided) High pressure ( provided)

Dive Rite 200 & 300 Bar Isolator Manifold Service Manual

SALEEN SPEEDLAB SERIES VI STANDARD SC UPGRADE KIT

BMS JB Stage1 n63/n63tu/s63/s63tu Install Guide

Troubleshooting: Door Jamming and Door Handing 6. Troubleshooting: Keypad 11. Troubleshooting: Battery 12. Battery FAQ 13

Rollator Cane and Brake Replacement SAFETY SUMMARY (CONTINUED)

COOPER S PULLEY UPGRADE KIT INSTALLATION INSTRUCTIONS PART NUMBER NME5011

Where to order engine kits The displacer cylinder CONTINUED

Hand Crank Generator (9 May 05) Converting a Portable Cordless Drill to a Hand Crank DC Generator

Before installation it is important to know what parts you have and what the capabilities of these parts are.

Tools Required: Sawzall, hack saw, or small body saw, drill, ¼ drill bit, ¾ hole saw, tape measure, silicone or epoxy, & 7/16 socket.

CUSTOM AUXILIARY FORWARD LIGHTING KIT

STEERING SYSTEM - POWER

SECTION G2: CABLE PROCESSOR MODULE MAINTENANCE

Floor Heating Warehouse.co.uk

# MOTOR MOUNT HOBIE 16.

K&T Saw Shop or

Technical Specifications


Juice Box Stages 1&2 135&335 Installation Guide 5/10/08

Tri-Homo Style Operation and Maintenance Instructions

Generator Parts List. GXi Part Number. Model Year. 5650,5650EL, 6500, 6500EL, 4550 Pro, 7550EL Pro DEK, STANLEY

Equipped with AEM Dryflow Filter No Oil Required! INSTALLATION INSTRUCTIONS PART NUMBER DS BMW 335i 3.0L

White Industries Rear Hub Instructions

SLACK PERFORMANCE KARTS

MFH-5057 Ford Small-Block V-8 Fresh Water Cooling Kit Instructions

Intake Manifold: Service and Repair

DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT

JANUS INTERNATIONAL CORPORATION INSTALLATION INSTRUCTIONS Pantheon Mini Operator

Polaris 9300 & 9400 Series Robotic Cleaner

Instructions for Using the Watch Works Tool Kit to Change a Watch Battery

AIR-SUSPENSION. Art. nr.: L.L C.M. Auxiliary Air Suspension. Designed for: Mitsubishi L200. From: 2007& UP RDW 71/

ENGINE FUEL FUEL FILTER... FUEL HEATER... INJECTOR... SUPPLY PUMP... COMMON RAIL... FUEL PRESSURE LIMITTER...

Verify caster, camber and toe-in are correct before proceeding.

TABLE OF CONTENTS. I. TROUBLESHOOTING Section 1.01: Common Problems/Solutions... 2

Tooling List 17mm Socket 17mm Wrench 24mm Wrench 26mm Wrench 3/8 Drive Ratchet Torque Wrench

Cooling system components, removing and installing

Sprinter Fuel Filter Installation

Alfa Romeo 147 On board instruments installation guide

REMOVAL AND INSTALLATION

Tool And Material Checklist

Transcription:

Welcome to Honda CX500 & GL500 Forum Sign in Join Faq Honda CX500 & GL500 Forum Discussion about the CX500, CX650, GL500, GL650, and Turbo variants Links Events Photos Forums CX500 Chopper Project Home Technical Help Forum Started by LRCXed at 01-12-2009 12:31 PM. Topic has 19 replies. Honda CX500 & G...» CX500 GL500 Tra...» Technical Help...» Remove OR Replace your carbs! Sort Posts: 01-12-2009, 12:31 PM LRCXed Remove OR Replace your carbs! As I promised someone the other day, Here is a step by step of replacing or removing your carbs from a CX500 S, D, or C. I'm showing the steps I take while installing a set. To remove them, just reverse the steps and start from the bottom up. Sorry the pictures are so dark. I didn't want to take the lights off my photo booth because I'm still working on the book. I'm installing a set of 78-79 STD. carbs here that I'm getting ready to balance and test run. Joined on 05-15-2008 Sacramento, California Posts 1,027 I don't think I need to tell you to remove the tank. In the second picture you should notice that the upper engine mounts are removed. This makes it a little easier to get the carbs in or out. And it's much easier to reach the balance adjustment screw when it's time to adjust the balance between them. OK, the carbs are rebuilt and or ready to go. You have the new O-ring seals in the intake manifolds and your ready to install the set. The first thing you want to do is to remove the right side cover and piston slider plus the plastic O-ring under it. Then with the carbs out on the side of the motor, install your 1 of 15 4/15/2009 11:12 PM

throttle cables and choke cable. You can adjust them from this point also. No need to try and reach inside after they are installed. After they are adjusted with about 1/8" to 1/4" throttle free play, tighten down the lock nuts on each cable. Now turn the carbs with the top twisted to the front of the motor and gently work them in between the motor and the frame tube. You might need to move the wire harness a bit, but when positioned properly, they go in smoothly. After they are in position, work them up into the air filter connections and clamp them lightly into position. Twist the throttle a few times to make sure your cables are not binding. Turn the bars all the way to the right to test this also. They seem to bind if they are not laid out right when the bike is turned to the right. The cables need to lay smoothly and not be twisted around each other, or have sharp bends in them. If it binds this is 2 of 15 4/15/2009 11:12 PM

the perfect time to back out and reposition all your cables. Next make sure the O-rings are installed in the end of the manifold, clamp installed very loosely on the rubber side, and with it rotated upwards, push the manifold onto the end of the carb. I wet the inner lip a bit with some spit. I know, but it helps when these things are so tight to push on. Now rotate the manifold back down into position and insert both bolts loosely to hold it in position. Please ensure the O-ring is still in it spot and has not fallen out. I have had this happen before, and found it laying on the floor after I thought it was done. You could use contact adhesive in a few spots to hold it in too. 3 of 15 4/15/2009 11:12 PM

Repeat the process on the right side same as the left. This side will be a little harder to get in because the left side is some what secured and the carb is not moving around as much. I guess you could put both on before you add the bolts if you wanted to.but when I do it this way, I know the O-ring is secured on the other side and wont fall out. Now you can tighten up the intake manifold bolts, and all for clamps on the rubbers so they are secure and sealed. Make sure the air box fittings are lipped all the way around the intake side of the carb. They are a little hard to see some times. Use a flash light. Install the plastic ring in the top of the carb, LIP FACES UP. 4 of 15 4/15/2009 11:12 PM

Then the piston and spring, be careful to align the slot up with the plastic guide, and be gentle with the slide needle. It should slide in easy. Secure the cover with it's 2 screws and attach the float bowl drain hoses. 5 of 15 4/15/2009 11:12 PM

That's all there is to it. Even with doing the pictures at the same time it still only took me about 35 minutes. You should be able to install a set in about 15 to 20 minutes tops. They key here is to have every thing laid out and ready as you start your work. At this point I don't need to go into how to put on your tank and the fuel line. I will tell you though that you should always use a fuel filter of some kind. It saves a lot of frustrations when you all of a sudden end up with one side not idling or adjusting right because you allowed dirt and debris to get into a clean carb. If your carbs are not balanced yet, then this is the time to do it. Add an external tank with filter on it and do the balancing before you put on the tank. Good luck, and I hope this helps those that have never done it 6 of 15 4/15/2009 11:12 PM