9700 NAMUR series, / & / > > Port size: G/, / NPT, NAMUR Interface > > Crossover-free switching > > Main application: Single and double acting actuators > > / way valve usable as / way valve > > Manual override with detent > > Variable valve solenoid combination Technical features Medium: Filtered, lubricated or nonlubricated and dry compressed air Operation: Indirect solenoid operated spool valve Operating pressure:... 8 bar (9... 6 psi) elow -0 C ( F) must be >, bar (> 6 psi) Port size: G/, / NPT NAMUR Interface with integrated recirculation from the exhaust air to the acutator sping chamber Flow direction: Fixed Mounting position: Optional Ambient/Media temperature: -... +0 C (+... + F) Air supply must be dry enough to avoid ice formation at temperatures below + C ( F). Materials: Housing: Aluminium anodized Pilot flange: Plastic (PT) Flange plate: Aluminium Seals: NR Technical data Housing: Aluminium anodized, Sealing: NR -... +0 C (+... F) Symbol Port size Actuation/Return Flow Weight Drawing Model *) & & (l/min) (kg) (lbs) No. G / G / Flange Solenoid/Spring 0 0, 0.9 970000 / NPT / NPT Flange Solenoid/Spring 0 0, 0.9 97000 G / G / Flange Solenoid/Solenoid 0 0,0. 97000 / NPT / NPT Flange Solenoid/Solenoid 0 0,0. 9700 *) When ordering please indi ate solenoid, voltage and current type (frequency). Option selector Function) Substitute / way, spring return (/ way 0 spare adaptor plate supplied) / way, solenoid return (/ way spare adaptor plate supplied) Ports size Substitute G/ 0 / NPT 97 0 0 Voltage Substitute V d.c. 000 0 V a.c. 00 Solenoid actuators Substitute See table on page without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH / en..8.0
9700 NAMUR series, / & / Solenoids, standard voltages Power consumption V d.c. 0 V a.c. (W) (VA) Rated current V d.c. 0 V a.c. (m A) (m A) Protection class IP/NEMA,8 70 IP6 (with,6 0 IP6 (with 8 IP6 (with 8 IP6 (with IP6 (with,7 IP6 (with,7 IP66 (with Ex-Protection (ATEX-Category) Temperature Ambient/ Media ( C) Electrical connection -... +0 Connector 70-80, form *) -... +0 Connector 70-80, form A *) II G Ex na IIC T Gc II D Ex tc IIIC T9 Dc IP6 II G Ex na IIC T Gc II D Ex tc IIIC T9 Dc IP6 II G Ex mb IIC T Gb II D Ex mb tb T0 C Db II G Ex mb IIC T Gb II D Ex mb tb T9 C Db -... +0 Special connector 70-80, form A *) -... +0 Special connector 70-80, form A *) -0... +0 Cable length m -0... +0 Cable length m -0... +0 Connector *) Mx, DIN IEC 6076--0 Solenoid with yellow LED Weight Standard voltages (±0%) V d.c., 0 V a.c., other voltages on request. Design according to VDE 080, EN 00/008. 00% duty cycle. *) Connector/cable gland is not scope of delivery,, see table»accessories«drawing Circuit diagram Model (kg) No. No. 0, 00 0, 06 0, 06 0, 07 0, 06 0, 06 0, 7 07 Approvals Model Approvals Datasheet ATEX 0x PT 06 ATEX 0 N/en 7.. 06x PT 0 ATEX 0 N/en 7..60 Electrical connection M x Model Pin Cable brown white blue black en..8.0 without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH /
9700 NAMUR series, / & / Accessories Connector 70-80 -pin, 90 -pin, 90 -pin, straight -pin, straight Silencer 0707, form A 008 ( m cable,-core) 068000, form 00 ( m cable,-core) 006 (without cable) 007 ( m cable, -core) 00 ( m cable, -core) 00 (without cable) C/S (/8 NPT) M/S (G/8) NAMUR accessories Throttle control plate *) Flange plate Yoke Distance plate for pressure switches Mounting plate Quick exhaust module *) Page & 6 009 06790 (NAMUR single connection plate) 009 0009 06 (90 ) 008 0679 (NAMUR-rip use in combination with 06790) 066 (80 ) 066 (70 ) *) The throttle control plate 009 has a minimum flow rate for safety reason. *) Technical details see catalogue page en..80. Drawings Valves,, 6,, ø, 6, 0 7,, 6, 0 7, 0, 0 Manual override Solenoid operator Coding stud Port size G/ or / NPT / without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH en..8.0
9700 NAMUR series, / & / Solenoids 9 6 9, 6 7 0 9, Ø9 Ø9 9, 9 9, 8, 0 M x ~8, 9, Ø9 Connector x 90 turnable Circuit diagrams 7 en..8.0 without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH /
9700 NAMUR series, / & / NAMUR hole pattern (driving side) Conversion instructions of / into / way function / way function / way function / / Port (A) Coding stud threaded (0 deep) Port (R) 6 / resp. / way function can be achieved just by swapping enclosed adaptor plates. Make sure marker and arrow do match as shown on above drawing. Original mode of supply: / function. 6 Arrow 6 Marker Accessories Silencer Model: M/S, C/S 6, Single connection plate Model: 06790 9, (x), 0 0 9 9 6 60 0 9 G/ 9,, 6 ø, /8 ø, ø 9, 9 G/ ø 9 ø, 7 / without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH en..8.0
9700 NAMUR series, / & / NAMUR slot Model: 0679 Yoke Model: 009 Throttle control plate Model: 009 9, x, 6 0 M 0 76 9,,, 8 60 7,,, A A Distance plate for pressure switches Model: 0009 Mounting plate Model: 06 (90 ) 6 9 Model: 066 (80 ) Model: 066 (70 ) 6 9 7 7 0 7 0 7 8 6 7 0 0 6, 7 7 0 0 7 7 0 9 6, en..8.06 without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH /
9700 NAMUR series, / & / Connector 90, pin, with PUR cable pin, without cable E ~ F E ~ F C ød ød F Wire x dim. Cable length (m) Weight Model M x,, 7 x 0, mm 90 008 M x,, 7 x 0, mm 80 00 C ød E F Weight Model M x, 0, 0 Pg 7 0 006 Straight, pin, with PUR cable Straight, pin, without cable C ød ød Wire x dim. Cable length (m) Weight Model M x, 0 x 0, mm 80 007 M x, 0 x 0, mm 00 00 C ød E Weight Model M x, 0, 0 Pg 7 6 00 Warning These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under»technical features/data«. efore using these products with fluids other than those specified, for non-industrial applications, life-support systems or other applications not within published specifications, consult IMI NORGREN. Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure. System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided. System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products. / without notice, the specifications given in this document. (009 - d) 0 Norgren GmbH en..8.07