Qatar National Construction Standards 2010 Contents



Similar documents
VOLUME V GUIDELINES FOR DESIGN CONSULTANT TABLE OF CONTENTS APPENDIX B: MASTER CONSTRUCTION SPECIFICATIONS AND PREPARATION GUIDE, DIVISIONS 0-10

MTA UNIVERSAL STATION PEDESTRIAN BRIDGE Los Angeles, CA. Project Manual and Specification 100% PE SUBMITTAL TABLE OF CONTENTS

Table of Contents. Division 2 Site Work Site Preparation Site Demolition Tree Protection Excavation, Trenching, and Backfilling for Utilities

OPTIMUS WORK CLASSIFICATION LIST ENTER ALL THAT APPLY

SECTION TABLE OF CONTENTS. H Proposed Material, Product or Equipment Substitution Request

Sub-Bid Contractor Update Statement. Tab A - Invitation for Bids. Tab B - Instructions to Bidders

ST. MONICA FOOD PANTRY HOUSTON, TEXAS

DIVISION 00 - PROCUREMENT AND CONTRACTING REQUIREMENTS

SAMPLE SCHEDULE OF VALUES APPLICATION & CERTIFICATE FOR PAYMENT

BMIC S APPETITE GUIDE EFFECTIVE JUNE 2013

VOLUME I PROCUREMENT AND CONTRACTING DOCUMENTS GROUP

B-1 Buildings & Service Maintenance

Which generic risk assessments are provided? Construction Risk. Assessments Plus. ervices

Think Of Us First! When It s Time to Distribute Your Plans

KIEWIT CM/GC Enabling/Utilities

C-2 Construction, Inc. - NAICS Codes

RESPONSIBILITY FOR REPAIRS AND MAINTENANCE FAIR FUNDING: April 2002

Tennessee 07/01/14. Contracting Class Codes with Descriptions (8)

Air-Conditioning, Heating, and Refrigeration Institute. Sheet Metal and Air-Conditioning Contractors National Association

CONTRACT PRICE ADJUSTMENT PROVISIONS (CPAP)

REGISTRATION OF INTEREST

Repair and Remodeling Estimating Methods. 4th Edition. RSMeans

ADDENDUM NO. 1. DATE: February 10, 2015 INVITATION FOR BID: IFB K Commerce Road Renovations Project DATED: February 9, 2015

Acceptance on the Approved List of contractors cannot however guarantee that any work orders will be issued to that contractor.

SECTION SELECTIVE DEMOLITION

Nominal Life Expectancy for Building Components

Information for Construction Contractors. Terry O Neill Taxpayer Service Specialist

Asbestos Procedures. Asbestos Products

L_All_Vocatinal_Ed_Construction. Sector: Construction. Sr. No Specialisation Page No 1 Construction and Building Technology 02.

GRU Purchasing Material Group Codes

Construction Industry Scheme

Acumen Enterprises, Inc.

RUSSIAN INDUSTRY STANDARDS CATALOG PUBLICATIONS TRANSLATED INTO ENGLISH

American Safety Insurance Company

MARKET SCOUT CONTRACTORS QUESTIONNAIRE (complete in addition to an Acord application) 1. Applicant:

CONTRACTOR PRE-QUALIFICATION QUESTIONNAIRE FOR COMPANIES EMPLOYING FIVE OR LESS EMPLOYEES

ISSUING AGENCY: New Mexico Public Regulation Commission, Insurance Division. [7-1-97; NMAC Rn & A, 13 NMAC 17.6.

SECTION STORM DRAINAGE SYSTEM

Outlook for the construction industry. Part One: BETA monitoring report Joinery ITO August 2013

Certification: Building Plans Examiner. Exam ID: B3

Guidelines on Prior Approval (PA) Application to recruit Foreign Workers (Construction)

MECHANICAL TRADE SCOPE OF WORK GUIDELINES

Capital Expenditure. The common definition of capital expenditure is

Hamilton-Wentworth Catholic District School Board Event Listing By Ascending Event Year

Solving Persistent Moisture Problems and Moisture Damage

Construction Technologies Career Field Pathways and Course Structure

GENERAL SPECIFICATION FOR CIVIL ENGINEERING WORKS SECTION 13 WORK FOR ELECTRICAL AND MECHANICAL INSTALLATIONS

Design and Build of Passenger Terminal Building North Extension At Macau International Airport (RFQ-198) Section 6 Bill of Quantities

Scope of Work Class I Contractor s Licenses. Putnam County Ordinance Section 17. Types of Authorized Contractor Licenses.

Hanson Building Products. precast basement solutions

NAHB PRODUCT DEFINITION

BILL OF QUANTITIES Part No.: Part Description

QATAR RAIL DOHA METRO PROJECT BUSINESS OPPORTUNITIES FOR LOCAL MARKET Daniel Leckel Chief Program Officer. 7 May, 2015

Solicitation Items Report

Milestones Primary. Early Start. Orig Dur. Early Finish. Act ID. Description NOTICE TO PROCEED START CONSTRUCTION

NOTICE TO CONTRACTORS

SECTION ALUMINUM FRAMED ENTRANCES and STOREFRONTS. System 402 Flush-Glazed Screw Spline Storefront

SECTION HEATING, VENTILATION AND AIR CONDITIONING EQUIPMENT

When is a Permit Required? What Types of Permits are Required? The most common types of projects that require permits are:

How To Make A House Safe

City of Treasure Island FEMA Cost Breakdown Worksheet For Substantial Improvement / Damage

LITITZ MUTUAL INSURANCE COMPANY 2 North Broad Street Lititz, Pennsylvania - MAIN OFFICE -

Facility Support Services

COMMERCIAL LINES UNDERWRITING MANUAL Special Risk Topics

LONDON BOROUGH OF HACKNEY BUILDING SERVICES ENGINEER REPORT GAS HOUSE, SPRINGFIELD PARK, HACKNEY

How To Get A Building Permit In Florida

Estimating Database Checklist

Construction Trades 2015 PROGRAMMEs


CHAPTER 2 QUANTITY TAKE-OFF

TS 813 GROUNDING AND BONDING TTD TRAFFIC SIGNAL INSTALLATION AND CONTROLLER CABINET GROUNDING SYSTEM TTD CONTROLLER CABINET GROUNDING

Static Electricity. A Health and Safety Guideline for Your Workplace. What Are Some Sources of Static Electricity? What is Static Electricity?

CONSTRUCTION SKILLS REGISTER HANDBOOK

Control Provisions under the Air Pollution Control Ordinance

CONSTRUCTION LAW. Mechanical Roofing Contractor. Electrical Class A Air Conditioning. Contractor Class B Air Conditioning

ADMINISTRATIVE CODE BOARD OF COUNTY COMMISSIONERS

MAKE CHECK PAYABLE TO MIAMI-DADE COUNTY

Transformer Deluge Systems

Herbicide Application. Irrigation System (Only) Sanitary System Testing & Inspections

Issue of the Guidelines on Prevention of Water Seepage in New Buildings

FREEPHONE: Asbestos Awareness. Toolbox Talk

Residential Inspection Guidelines

SECTION 22 LIGHTNING PROTECTION SYSTEM

SECTION PUBLIC STORM UTILITY DRAINAGE PIPING

Construction Working Conditions Checklist

REVEWED BY: Ross Rogien B.O/P.R. ADDITIONAL REVIEW(S) REQ.-FIRE DEPT Y/N

All substantial design decisions and budget confirmation shall be resolved for the College to approve the Design Development Submittal.

October 5, 2015 Dear Client,

Mould Mould A Basic Guide

SUBSTANTIAL IMPROVEMENT OR SUBSTANTIAL DAMAGE NOTICE TO PROPERTY OWNER

Crump Insurance Services

MRI RF SHIELDING DESIGN

MISCELLANEOUS ELECTRICAL JOBS REQUIRING PERMITS

Contractor Remodel/Repair Insurance Application (Complete in addition to ACORD General Liability Application)

Management of Asbestos. Darren Arkins Senior Inspector Occupational Hygiene Unit Chemical Business Services Division

SECTION 15 AIR RELEASE VALVE ASSEMBLIES General

Seattle Public Schools Building Excellence IV Projects Under Construction

D Sample Notices to Property Owners, Sample Affidavits, and Other Material

FDOT Specifications List

Transcription:

1- General 01. Introduction 02. Use and Maintenance of the Site 03. Site Access and Entry onto the Site 04. Protection 05. Interference 06. Project Meetings 07. Submittals 08. Quality Assurance 09. Materials 10. Occupational Health and Safety 11. Engineer s Site Facilities 12. Contractor s Site Facilities 13. Setting Out of the Works 14. Temporary Works and Equipment 15. Temporary Controls 16. Traffic Diversions 17. Project Co-ordination 18. Other Contractors 19. Regulatory Requirements 20. Clearance of the Site 21. Inspection and Handover Procedures 22. New Technologies and Innovations 2- Building Demolition 02. Building Demolition 03. Hazardous Materials 3- Ground Invest Ground Investigation igation 02. Boreholes 03. Pits and Trenches 04. Soil Sampling 05. In-Situ Testing, Instrumentation and Monitoring 06. Laboratory Testing 4- Pilling Requirements for Piling Work 02. General Requirements for Concrete Piles 03. Precast Reinforced and Prestressed Concrete Piles 04. Precast Reinforced Concrete Segmental Piles 05. Bored Cast-In-Place Piles 06. Bored Piles Constructed Using Continuous Flight Augers and Concrete or Grout Injection through Hollow Auger Stems 07. Driven Cast-In-Place Piles 08. Steel Piles

09. Steel Sheet Piling 10. Static Load Testing of Piles 11. Alternative Methods for Testing Piles 12. Reduction of Friction on Piles 5- Concrete 02. Aggregates 03. Cement 04. Water 05. Admixtures 06. Property Requirements 07. Batching and Mixing 08. Transportation and Placing of Concrete 09. Formwork 10. Curing 11. Reinforcement 12. Joints 13. Inspection and Testing of Hardened Concrete 14. Protective Treatments for Concrete 15. Hot Weather Concreting 16. Miscellaneous 17. Structural Precast Concrete 18. Prestressed Concrete 19. Testing of Water Retaining Structures 6- Road works 02. Site Clearance 03. Earthworks 04. Unbound Pavement Materials 05. Asphalt Works 06. Concrete Road Pavements 07. Vehicle Crash Barriers 08. Kerbs, Footways and Paved Areas 09. Fencing 10. Traffic Signs, Markings and Studs 11. Works in Relation to Services 12. Road Lighting 13. Traffic Signals 14. Road Drainage 15. Geosynthetics 16. Miscellaneous 7- Green Constructions 01. Miscellaneous 02. Qatar Sustainability Assessment System QSAS

03. Energy 04. Water 05. Indoor Environment 06. Cultural & Economic Value 8- Sewerage 02. Earthworks 03. Pipes and Fittings Materials 04. Pipeline Installation 05. Valves, Penstocks and Appurtenances 06. Metal Works 07. Glass Reinforced Plastics 08. Painting and Protective Coatings 09. Trenchless Pipeline Construction 10. Pipeline Cleaning and Inspection Survey 11. Sewer Rehabilitation 12. Vacuum Sewerage System 9- Mechanical and Electrical Equipment 02. Submersible Pumps 03. Centrifugal Pumps 04. Sump Pumps 05. Archimedian Screw Pumps 06. Surge Control System 07. Lifting Equipment 08. Electric and Pneumatic Actuators 09. Odour Control Equipment Carbon Type 10. Odour Control Equipment Scrubber Type 11. Screening Equipment 12. Grit Removal Equipment 13. Aeration Equipment 14. Air Blowers & Compressors 15. Settlement Tank Equipment 16. Tertiary Treatment Granular Filters 17. Sludge Thickening & Dewatering Equipment 18. Mixers & Stirrers 19. Chlorination 20. Washwater Systems 21. Miscellaneous Equipment 22. Ventilation Systems 10- Instruction, Control and Automation 02. Telemetry/SCADA

03. Primary Elements 04. Panel Mounted and Miscellaneous Instruments 05. Control Panels and Control Room Hardware 11- Health and Safety 1.1 QATAR LEGISLATION AND MANAGEMENT 1.2 OCCUPATIONAL HEALTH AND HYGIENE 1.3 WORKING AT HEIGHTS 1.4 SAFE USE OF PLANT EQUIPMENT 1.5 OTHER HAZARDOUS ACTIVITIES 1.6 HUMAN FACTORS 1.7 FIRE AND FLAMMABLE SUBSTANCES 1.8 MISCELLANEOUS 2.1 SAFETY, HEALTH AND ENVIRONMENT (SHE) MANAGEMENT SYSTEM 2.2 SAFETY, HEALTH AND ENVIRONMENT PROCEDURAL AUDIT CHECKLISTS 2.3.1 Risk Identification and Management 2.3.2 COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) 2.3.3 SAFE WORKING IN THE VICINITY OF BURIED AND OVERHEAD SERVICES 2.3.4 ELECTRICITY AT WORK 2.3.5 POWERED WORK EQUIPMENT PROCEDURE 2.3.6 SAFETY, HEALTH AND ENVIRONMENTAL TRAINING FOR ALLEMPLOYEES, NEWLY ASSIGNED EMPLOYEES, PROMOTEES AND SUB-CONTRACTOR PERSONNEL 2.3.7 CONTRACTORS INITIAL SAFETY, HEALTH AND ENVIRONMENTAL MEETING 2.3.8 THE REPORT AND INVESTIGATION OF ACCIDENTS AND INCIDENTS 2.3.9 PERSONAL PROTECTIVE EQUIPMENT (PPE) 2.3.10 THE SAFE USE OF CRANES & OTHER LIFTING APPLIANCES (EXCAVATORS, TELE HANDLERS AND LORRY LOADERS) 2.3.11 PERMIT TO WORK SYSTEMS 2.3.12 CONTROL OF WORKING AT HEIGHTS 2.3.13 FIRE PRECAUTIONS DURING CONSTRUCTION WORKS IN BUILDINGS 2.3.14 ASBESTOS 2.3.15 ENVIRONMENTAL PROTECTION 2.3.16 LEARNING EVENT REPORTING 2.4 RISK ASSESSMENT GUIDES 12- Earthworks Related to Buildings 02. EXCAVATION 03. FILLING 04. UTILITY TRENCHES 05. INSTALLATION OF PROTECTIVE MEMBRANES 13- Masonry 02. MORTAR AND GROUT 03. ACCESSORIES 04. UNIT MASONRY

05. MASONRY LAYING 14- Roofing 02. MEMBRANE ROOFING 03. METAL AND PLASTIC ROOFING 04. ROOF AND DECK INSULATION 05. GENERA 15- Thermal Insulation of Building 02. BUILDING INSULATION 03. COLD STORES 16- Structural Steelworks 02. MATERIALS 03. DRAWINGS 04. FABRICATION 05. WELDING 06. BOLTING 07. ACCURACY OF FABRICATION 08. ERECTION 09. ACCURACY OF ERECTED STEELWORK 10. PROTECTIVE TREATMENT 17- Metalwork 02. MATERIAL TYPES AND FINISHES 03. METAL DOORS AND WINDOWS 04. ARCHITECTURAL METAL WORK 05. LIGHT METAL SUPPORT AND CLADDING SUPPORT 06. WORKMANSHIP 18- Carpentry, Joinery and Ironmongery 02. WOOD TREATMENT 03. STRUCTURAL TIMBER 04. ARCHITECTURAL TIMBER 05. JOINERY 06. FASTENERS AND ADHESIVES 07. IRONMONGERY 19- Plumbing Work 02. WATER DISTRIBUTION

03. PLUMBING PIPEWORK IN TRENCHES 04. COLD WATER STORAGE 05. HOT WATER STORAGE 06. COMMISSIONING OF SYSTEMS 07. PLUMBING FOR GASES 20- Drainage Works for Buildings 02. INTERNAL DRAINAGE WORKS 03. EXTERNAL DRAINAGE WORKS 04. DRAINAGE PIPES IN TRENCHES 05. STRUCTURES RELATED TO DRAINAGE WORK 06. SURFACE WATER DRAINAGE 07. COMMISSIONING OF SYSTEMS 21- Electrical Works PROVISIONS FOR ELECTRICAL INSTALLATION 02. MV FACTORY BUILT ASSEMBLIES (FBA S) 03. PROTECTIVE DEVICES 04. MOTOR STARTERS 05. VARIABLE SPEED CONTROLLERS 06. CABLES AND SMALL WIRING 07. CONDUITS AND CONDUIT BOXES 08. TRUNKING 09. CABLE TRAYS 10. WIRING ACCESSORIES AND GENERAL POWER 11. LIGHT FITTINGS 12. EMERGENCY LIGHTING 13. TELEPHONE INSTALLATIONS 14. STRUCTURED CABLING SYSTEMS 15. ELECTRIC MOTORS 16. POWER FACTOR CORRECTION CAPACITORS 17. STANDBY DIESEL GENERATOR SET 18. UNINTERRUPTIBLE POWER SUPPLY SYSTEMS 19. SOUND AND CALL SYSTEMS 20. ELEVATORS/ESCALATORS 21. LIGHTNING PROTECTION 22. EARTHING AND BONDING 23. INSPECTION AND TESTING 24. DOCUMENTATION FORMAT 25. ELECTRICAL IDENTIFICATIONS 26. ELECTROMAGNETIC COMPATIBILITY 27. BATTERY AND BATTERY CHARGER 28. SMALL ENCLOSURES 29. UNDERFLOOR DUCTS 30. DUCT BANK AND MANHOLES

31. POWER DISTRIBUTION TRANSFORMERS 32. 11 KV SWITCHGEAR 33. ACTUATORS 22- Air Conditioning, Refrigeration and Ventilation 02. CENTRAL REFRIGERATION & AIR CONDITIONING EQUIPMENT 03. UNITARY EQUIPMENT 04. AIR HANDLING EQUIPMENT 05. CHILLED WATER PIPEWORK 06. DUCTWORK AND AIR-SIDE EQUIPMENT 07. THERMAL INSULATION 08. EXHAUST FANS 09. ACCESSORIES 23- Fire Fighting and Fire Fighting System 02. FIRE ALARM AND DETECTION SYSTEMS 03. ANALOGUE ADDRESSABLE FIRE ALARM SYSTEM 04. FIRE FIGHTING SYSTEM 05. TESTING AND COMMISSIONING 24- Finishes to Building 02. LATH AND PLASTER 03. DRY LINING (WALLBOARD 04. SPECIAL WALL SURFACES 05. TILES 06. TERRAZZO 07. STONE FLOORING 08. UNIT MASONRY FLOORING 09. FLOOR SCREEDS AND TREATMENTS 10. JOINTS, CAULKING AND SEALANTS 11. RECESSED DUCT COVERS 12. CARPETING 13. OTHER FLOOR COVERINGS 14. CEILINGS 25- Glass and Glazing 02. GLASS 03. WORKMANSHIP 04. GLAZED CURTAIN WALLING SYSTEMS 26- Painting and Decorating

02. SURFACE PREPARATION FOR PAINTING 03. PRIMERS, PAINTS AND COATINGS 04. DECORATIVE PAPERS AND FABRICS 27- External Works 02. BLOCK PAVED AREAS 03. FENCES AND GATES 04. FOUNTAINS AND AQUATIC FEATURES 05. SITE FURNITURE 06. FLAG POLES 07. PROTECTIVE OR SHADE COVER SYSTEMS 08. PLAY FIELD AND PARK EQUIPMENT 09. MISCELLANEOUS OTHER EXTERNAL WORKS 28- Landscaping 01. LANDSCAPING PLANTING 02. IRRIGATION SYSTEM SPECIFICATIONS 03. PLAY EQUIPMENT GENERAL SPECIFICATION