SINAMICS S120 drive sysem Design PM340, frame sizes FSA o FSF The PM340 feaure he following connecions as sandard: DCP/R1 and DCN DC link Terminals DCP/R1 and R2 for connecion of an exernal braking PM-IF inerface for connecion of he PM340 Power Module and CU310 DP Conrol Uni or CUA31 Conrol Uni Adaper. The PM340 Power Module also supplies power o he CU310 DP Conrol Uni or CUA31 Conrol Uni Adaper by means of an inegraed power supply Moor connecion made wih screw or screw suds Conrol circui for he Brake Relay for conrolling a holding brake 2 PE (proecive earh) connecions wih inegraed line filer are suiable only for connecion o TN supply sysems. wihou inegraed line filer can be conneced o grounded (TN, TT) and non-grounded (IT) supply sysems. When uilizing he inegraed Braking Uni (Braking Chopper), he emperaure of he exernal braking mus be moniored (i.e. hermosaic swich) o provide proecion agains hermal overloading. /67
SINAMICS S120 drive sysem Inegraion The PM340 communicae wih he CU310 DP Conrol Uni or he CUA31 Conrol Uni Adaper via he PM-IF inerface. Many sysem componens for PM340 are designed as base componens, i.e. he componen is mouned on he baseplae and he PM340 Power Module in fron of hem in a space-saving consrucion. Up o wo base componens can be mouned in fron of one oher. Frame size FSA FSB FSC FSD FSE FSF Line filer Line O reacor Braking O O O O Moor O O O reacor suiable as base-ype O = no suiable as base-ype = no available (use Power Module wih inegraed filer) PM340 Power Module in blocksize forma wih CU310 DP Conrol Uni PM340 Power Module in blocksize forma wih CUA31 Conrol Uni Adaper /68
SINAMICS S120 drive sysem Inegraion (coninued) Power Module Power supply Line reacor Basic layou of a PM340 Power Module wih line reacor as base componen The line-side reacors are equipped wih on he line side and wih a pre-assembled cable on he Power Module side. When insalled, he mains are a he op on frame sizes FSA o FSC, and a he boom on frame sizes FSD and FSE. Power Module Line filer Power Module PM340 frame size FSA wih line reacor and line filer If a line filer is insalled in addiion o he line reacor on frame size FSA, he componens mus be arranged as shown in he diagram above. In his case, he mains connecion is a he boom. of frame size FSB and higher are available wih inegraed line filers, alleviaing he need for an exernal line filer. For configuraions involving more han wo base-ype sysem componens, e.g. line reacor + braking, individual componens mus be mouned o he side of he Power Module. In his insance, he line reacor mus be insalled behind he Power Module and he braking o he side. G_D211_EN_00078 Line reacor G_D211_EN_0007 Power supply Technical specificaions General echnical specificaions Line connecion volage Up o 2000 m (6562 f) above sea level 200... 240 V 1 AC ± 10% (-15% < 1 min) or 380... 480 V 3 AC ± 10% (-15% < 1 min) 47... 63 Hz Line frequency Line power facor a raed power Fundamenal power facor >0.6 (cos φ 1 ) Toal (λ) - 200... 240 V 1 AC 0.45... 0.7-380... 480 V 3 AC 0.65... 0.5 Overvolage caegory Class III o EN 60664-1 DC link precharging frequency, 1 every 30 s max. DC link volage, approx. 1.35 x line volage Oupu frequency Conrol ype Servo 0... 650 Hz 1) Conrol ype Vecor 0... 300 Hz 1) Conrol ype V/f 0... 300 Hz 1) Elecronics power supply 24 V DC -15%/+20% Sandard no radio inerference suppression Wih line filer Class A1 o EN 55011 and Caegory C2 o EN 61800-3 Type of cooling Inernal air cooling, wih increased air cooling by means of buil-in fans Permissible ambien or coolan emperaure (air) in operaion for line-side componens, Line Modules and Moor Modules Insallaion aliude Conformiy Approvals 0... 40 C (32... 104 F) wihou deraing, > 40... 55 C (104... 131 F), see deraing characerisics Up o 1000 m (3281 f) above sea level wihou deraing, > 1000... 4000 m (3281... 13124 f) above sea level, see deraing characerisics CE (low-volage and EMC direcives) culus 200... 240 V 1 AC - Frame size FSA File No.: E12450 380... 480 V 3 AC - Frame sizes FSA o FSC - Frame sizes FSD o FSF File No.: E121068 File No.: E12450 1) Noe correlaion beween max. oupu frequency, pulse frequency and curren deraing; see sysem descripion on he CD-ROM supplied wih he caalog. /6
SINAMICS S120 drive sysem Technical specificaions (coninued) Line volage 200... 240 V 1 AC Order No. 1SB11-0... 1SB12-3... 1SB14-0... Produc name PM340 Oupu curren Raed curren I raed A 0. 2.3 3. Base load curren I H A 0.8 2.0 3.4 for S6 duy (40%)I S6 A 1.4 3.3 5.5 I max A 2.0 4.6 7.8 Raed power kw (HP) 3) 0.12 (0.2) 0.37 (0.5) 0.75 (0.75) based on I raed Raed pulse frequency khz 4 4 4 Efficiency η 0.88 0.3 0.3 Power loss kw 0.06 0.075 0.11 Cooling air requiremen m 3 /s (f 3 /s) 0.005 (0.02) 0.005 (0.02) 0.005 (0.02) Sound pressure level db (A) < 45 < 45 < 45 24 V DC supply A 1.0 1.0 1.0 for Conrol Uni Raed inpu curren 1) A 1.4/2.2 4/6 6.5/10 wih/wihou line reacor Resisance value Ω 180 180 180 of he exernal braking Cable lengh, max. m (f) 15 (4) 15 (4) 15 (4) o braking Line connecion L, N Conducor cross-secion 1.0... 2.5 1.0... 2.5 1.0... 2.5 Moor connecion U2, V2, W2 Conducor cross-secion 1.0... 2.5 1.0... 2.5 1.0... 2.5 DC link connecion, connecion for he braking DCP/R1, DCN, R2 Conducor cross-secion 1.0... 2.5 1.0... 2.5 1.0... 2.5 PE connecion On housing wih M4 screw On housing wih M4 screw On housing wih M4 screw Moor cable lengh, max. 2) (wihou exernal opions) Shielded m (f) 50 (164) 50 (164) 50 (164) Unshielded m (f) 75 (246) 75 (246) 75 (246) Degree of proecion IP20 IP20 IP20 Dimensions Widh mm (in) 73 (2.87) 73 (2.87) 73 (2.87) Heigh mm (in) 173 (6.81) 173 (6.81) 173 (6.81) Deph - PM340 mm (in) 145 (5.7) 145 (5.7) 145 (5.7) - PM340 wih CU310 DP mm (in) 234.6 (.24) 234.6 (.24) 234.6 (.24) - PM340 wih CUA31 mm (in) 175.3 (6.) 175.3 (6.) 175.3 (6.) Frame size FSA FSA FSA Weigh, approx. kg (lb) 1.2 (3) 1.3 (3) 1.3 (3) 1) The inpu curren depends on he moor load and line impedance. The inpu currens apply for raed power loading (based on I raed ) for a line impedance corresponding o u k = 1%. 2) Max. moor cable lengh 15 m (4 f) (shielded) for PM340 wih inegraed line filer o mainain he limi values of EN 61800-3 Caegory C2. 3) Nominal HP based on Asynchronous moors (inducion moors). For specific sizing selec drive based on moor nameplae curren and overload. /70
SINAMICS S120 drive sysem Technical specificaions (coninued) Line volage 380... 480 V 3 AC Order No. 1SE11-3UA0 1SE11-7UA0 1SE12-2UA0 1SE13-1UA0 1SE14-1UA0 Produc name PM340 Oupu curren Raed curren I raed A 1.3 1.7 2.2 3.1 4.1 Base load curren I H A 1.1 1.5 1. 2.7 3.6 for S6 duy (40%)I S6 A 1.3 2.0 2.5 3.5 4.5 I max A 2.6 3.4 4.4 6.2 8.2 Raed power based on I raed kw (HP) 3) 0.37 (0.5) 0.55 (0.75) 0.75 (1) 1.1 (1.5) 1.5 (2) based on I H kw (HP) 0.37 (0.5) 0.55 (0.75) 0.75 (1) 1.1 (1.5) 1.5 (2) Raed pulse frequency khz 4 4 4 4 4 Efficiency η 0.0 0.2 0.4 0.5 0.6 Power loss kw 0.10 0.10 0.10 0.11 0.11 Cooling air requiremen m 3 /s (f 3 /s) 0.005 (0.02) 0.005 (0.02) 0.005 (0.02) 0.005 (0.02) 0.005 (0.02) Sound pressure level db (A) < 45 < 45 < 45 < 45 < 45 24 V DC supply A 1.0 1.0 1.0 1.0 1.0 for Conrol Uni Raed inpu curren 1) A 1.3/1.7 1.7/2.2 2.2/2.6 3.1/3. 4.1/4.8 wih/wihou line reacor Resisance value Ω 30 30 30 30 30 of he exernal braking Cable lengh, max. m (f) 15 (4) 15 (4) 15 (4) 15 (4) 15 (4) o braking Line connecion L, N Conducor cross-secion mm 2 1.0... 2.5 1.0... 2.5 1.0... 2.5 1.0... 2.5 1.0... 2.5 Moor connecion U2, V2, W2 Conducor cross-secion mm 2 1.0... 2.5 1.0... 2.5 1.0... 2.5 1.0... 2.5 1.0... 2.5 DC link connecion, connecion for he braking DCP/R1, DCN, R2 Conducor cross-secion mm 2 1.0... 2.5 1.0... 2.5 1.0... 2.5 1.0... 2.5 1.0... 2.5 PE connecion On housing wih M4 screw Moor cable lengh 2), max. Shielded m (f) 50 (164) 50 (164) 50 (164) 50 (164) 50 (164) Unshielded m (f) 75 (246) 75 (246) 75 (246) 75 (246) 75 (246) Degree of proecion IP20 IP20 IP20 IP20 IP20 Dimensions Widh mm (in) 73 (2.87) 73 (2.87) 73 (2.87) 73 (2.87) 73 (2.87) Heigh mm (in) 173 (6.81) 173 (6.81) 173 (6.81) 173 (6.81) 173 (6.81) Deph - PM340 mm (in) 145 (5.7) 145 (5.7) 145 (5.7) 145 (5.7) 145 (5.7) - PM340 wih CU310 DP mm (in) 234.6 (.24) 234.6 (.24) 234.6 (.24) 234.6 (.24) 234.6 (.24) - PM340 wih CUA31 mm (in) 175.3 (6.) 175.3 (6.) 175.3 (6.) 175.3 (6.) 175.3 (6.) Frame size FSA FSA FSA FSA FSA Weigh, approx. kg (lb) 1.2 (3) 1.2 (3) 1.2 (3) 1.2 (3) 1.2 (3) 1) The inpu curren depends on he moor load and line impedance. The inpu currens apply for raed power loading (based on I raed ) for a line impedance corresponding o u k = 1%. 2) Max. moor cable lengh 25 m (82.0 f) (shielded) for PM340 wih inegraed line filer o mainain he limi values of EN 61800-3 Caegory C2. 3) Nominal HP based on Asynchronous moors (inducion moors). For specific sizing selec drive based on moor nameplae curren and overload. /71
SINAMICS S120 drive sysem Technical specificaions (coninued) Line volage 380... 480 V 3 AC Order No. 1SE16-0... 1SE17-7... 1SE21-0... 1SE21-8... 1SE22-5... 1SE23-2... Produc name PM340 Oupu curren Raed curren I raed A 5. 7.7 10.2 18 25 32 Base load curren I H A 5.2 6.8.1 14 21 27 for S6 duy (40%)I S6 A 6.4 8.3 10.8 1.6 27.8 37.1 I max A 11.8 15.4 20.4 26.4 38 52 Raed power based on I raed kw (HP) 3) 2.2 (3) 3 (5) 4 (5) 7.5 (10) 11 (15) 15 (20) based on I H kw (HP) 2.2 (3) 3 (5) 4 (5) 5.5 (10) 7.5 (15) 11 (20) Raed pulse frequency khz 4 4 4 4 4 4 Efficiency η 0.6 0.7 0.7 0.8 0.8 0.8 Power loss kw 0.14 0.16 0.18 0.24 0.30 0.40 Cooling air requiremen m 3 /s (f 3 /s) 0.00 (0.03) 0.00 (0.03) Sound pressure level db (A) < 50 < 50 < 50 < 60 < 60 < 60 24 V DC supply A 1.0 1.0 1.0 1.0 1.0 1.0 for Conrol Uni Raed inpu curren 1) A 5.6/6.7 7.5/8..8/12.4 17.1/23.1 24.6/32.6 33/3 wih/wihou line reacor Resisance value Ω 160 160 160 56 56 56 of he exernal braking Cable lengh, max. m (f) 15 (4) 15 (4) 15 (4) 15 (4) 15 (4) 15 (4) o braking Line connecion L, N Conducor cross-secion mm 2 1.0... 6 1.0... 6 1.0... 6 2.5... 10 2.5... 10 2.5... 10 Moor connecion U2, V2, W2 Conducor cross-secion mm 2 1.0... 6 1.0... 6 1.0... 6 2.5... 10 2.5... 10 2.5... 10 DC link connecion, connecion for he braking DCP/R1, DCN, R2 0.00 (0.03) 0.038 (0.12) 0.038 (0.12) 0.038 (0.12) Conducor cross-secion mm 2 1.0... 6 1.0... 6 1.0... 6 2.5... 10 2.5... 10 2.5... 10 PE connecion On housing wih M5 screw Moor cable lengh 2), max. Shielded m (f) 50 (164) 50 (164) 50 (164) 50 (164) 50 (164) 50 (164) Unshielded m (f) 75 (246) 75 (246) 75 (246) 75 (246) 75 (246) 75 (246) Degree of proecion IP20 IP20 IP20 IP20 IP20 IP20 Dimensions Widh mm (in) 153 (6.02) 153 (6.02) 153 (6.02) 188.4 (7.42) 188.4 (7.42) 188.4 (7.42) Heigh mm (in) 270 (10.63) 270 (10.63) 270 (10.63) 333.4 (13.13) 333.4 (13.13) 333.4 (13.13) Deph - PM340 mm (in) 165 (6.5) 165 (6.5) 165 (6.5) 185 (7.28) 185 (7.28) 185 (7.28) - PM340 wih CU310 DP mm (in) 254.6 (10.02) 254.6 (10.02) 254.6 (10.02) 274.6 (10.81) 274.6 (10.81) 274.6 (10.81) - PM340 wih CUA31 mm (in) 15.3 (7.6) 15.3 (7.6) 15.3 (7.6) 215.3 (8.48) 215.3 (8.48) 215.3 (8.48) Frame size FSB FSB FSB FSC FSC FSC Weigh, approx. kg (lb) 4.0 () 4.0 () 4.0 () 6.5 (14) 6.5 (14) 6.5 (14) 1) The inpu curren depends on he moor load and line impedance. The inpu currens apply for raed power loading (based on I raed ) for a line impedance corresponding o u k = 1%. 2) Max. moor cable lengh 25 m (82.0 f) (shielded) for PM340 wih inegraed line filer o mainain he limi values of EN 61800-3 Caegory C2. 3) Nominal HP based on Asynchronous moors (inducion moors). For specific sizing selec drive based on moor nameplae curren and overload. /72
SINAMICS S120 drive sysem Technical specificaions (coninued) Line volage 380... 480 V 3 AC Order No. 1SE23-8... 1SE24-5... 1SE26-0... 1SE27-5... 1SE31-0... Produc name PM340 Oupu curren Raed curren I raed A 38 45 60 75 0 Base load curren I H A 33 40 48 65 80 for S6 duy (40%)I S6 A 4 58 78 8 117 I max A 64 76 0 124 150 Raed power based on I raed kw (HP) 3) 18.5 (25) 22 (30) 30 (40) 37 (50) 45 (60) based on I H kw (HP) 15 (20) 18.5 (30) 22 (30) 30 (50) 37 (60) Raed pulse frequency khz 4 4 4 4 4 Efficiency η 0.8 0.8 0.8 0.8 0.8 Power loss kw 0.38 0.51 0.6 0. 1.21 Cooling air requiremen m 3 /s (f 3 /s) 0.022 (0.07) 0.022 (0.07) Sound pressure level db (A) < 60 < 60 < 61 < 60 62 24 V DC supply A 1.0 1.0 1.0 1.0 1.0 for Conrol Uni Raed inpu curren 1) A 40/46 47/53 63/72 78/88 4/105 wih/wihou line reacor Resisance value Ω 27 27 27 15 15 of he exernal braking Cable lengh, max. m (f) 15 (4) 15 (4) 15 (4) 15 (4) 15 (4) o braking Line connecion M6 screw suds M6 screw suds M6 screw suds M6 screw suds M6 screw suds L, N Conducor cross-secion mm 2 10... 35 10... 35 10... 35 10... 35 10... 35 Moor connecion M6 screw suds M6 screw suds M6 screw suds M6 screw suds M6 screw suds U2, V2, W2 Conducor cross-secion mm 2 10... 35 10... 35 10... 35 10... 35 10... 35 DC link connecion, M6 screw suds M6 screw suds M6 screw suds M6 screw suds M6 screw suds connecion for he braking DCP/R1, DCN, R2 Conducor cross-secion mm 2 10... 35 10... 35 10... 35 10... 35 10... 35 PE connecion On housing wih M6 screw Moor cable lengh 2), max. Shielded m (f) 70 (230) 70 (230) 70 (230) 70 (230) 70 (230) Unshielded m (f) 100 (328) 100 (328) 100 (328) 100 (328) 100 (328) Degree of proecion IP20 IP20 IP20 IP20 IP20 Dimensions Widh mm (in) 275 (10.83) 275 (10.83) 275 (10.83) 275 (10.83) 275 (10.83) Heigh PM340 wihou/wih inegraed 418.3/511 (16.47/20.12) 418.3/511 (16.47/20.12) 418.3/511 (16.47/20.12) 48.3/633 (1.62/24.2) 48.3/633 (1.62/24.2) filer Deph - PM340 mm (in) 203.5 (8.01) 203.5 (8.01) 203.5 (8.01) 203.5 (8.01) 203.5 (8.01) - PM340 wih CU310 DP mm (in) 23.1 (11.54) 23.1 (11.54) 23.1 (11.54) 23.1 (11.54) 23.1 (11.54) - PM340 wih CUA31 mm (in) 233.8 (.2) 233.8 (.2) 233.8 (.2) 233.8 (.2) 233.8 (.2) Frame size FSD FSD FSD FSE FSE Weigh, approx. PM340 wih/wihou inegraed filer kg (lb) 15./1.3 (35/43) 15./1.3 (35/43) 0.03 (0.13) 15./1.3 (35/43) 0.022 (0.07) 1.8/27.1 (44/60) 0.03 (0.13) 1.8/27.1 (44/60) 1) The inpu curren depends on he moor load and line impedance. The inpu currens apply for raed power loading (based on I raed ) for a line impedance corresponding o u k = 1%. 2) Max. moor cable lengh 25 m (82.0 f) (shielded) for PM340 wih inegraed line filer o mainain he limi values of EN 61800-3 Caegory C2. 3) Nominal HP based on Asynchronous moors (inducion moors). For specific sizing selec drive based on moor nameplae curren and overload. /73
SINAMICS S120 drive sysem Technical specificaions (coninued) Line volage 380... 480 V 3 AC Order No. 1SE31-1... 1SE31-5... 1SE31-8... Produc name PM340 Oupu curren Raed curren I raed A 110 145 178 Base load curren I H A 5 115 155 for S6 duy (40%)I S6 A 143 188 231 I max A 180 220 20 Raed power based on I raed kw (HP) 3) 55 (75) 75 (100) 0 (125) based on I H kw (HP) 45 (60) 55 (75) 75 (100) Raed pulse frequency khz 4 4 4 Efficiency η 0.8 0.8 0.8 Power loss kw 1.42 1.3 2.31 Cooling air requiremen m 3 /s (f 3 /s) 0.04 (0.31) Sound pressure level db (A) < 60 < 60 65 24 V DC supply A 1.0 1.0 1.0 for Conrol Uni Raed inpu curren 1) A 115/12 151/168 186/204 wih/wihou line reacor Resisance value Ω 8.2 8.2 8.2 of he exernal braking Cable lengh, max. m (f) 15 (4) 15 (4) 15 (4) o braking Line connecion M8 screw suds M8 screw suds M8 screw suds U1/L1, V1/L2, W1/L3 Conducor cross-secion mm 2 120 or 2 50 120 or 2 50 120 or 2 50 Moor connecion M8 screw suds M8 screw suds M8 screw suds U2, V2, W2 Conducor cross-secion mm 2 120 or 2 50 120 or 2 50 120 or 2 50 DC link connecion, M8 screw suds M8 screw suds M8 screw suds connecion for he braking DCP/R1, DCN, R2 Conducor cross-secion mm 2 120 or 2 50 120 or 2 50 120 or 2 50 PE connecion On housing wih M8 screw On housing wih M8 screw On housing wih M8 screw Moor cable lengh 2), max. Shielded m (f) 70 (230) 70 (230) 70 (230) Unshielded m (f) 100 (328) 100 (328) 100 (328) Degree of proecion IP20 IP20 IP20 Dimensions Widh mm (in) 350 (13.78) 350 (13.78) 350 (13.78) Heigh mm (in) 634/34 (24.6/36.77) 634/34 (24.6/36.77) 634/34 (24.6/36.77) PM340 wihou/wih inegraed filer Deph - PM340 mm (in) 315.5 (12.42) 315.5 (12.42) 315.5 (12.42) - PM340 wih CU310 DP mm (in) 405.1 (15.5) 405.1 (15.5) 405.1 (15.5) - PM340 wih CUA31 mm (in) 345.8 (13.61) 345.8 (13.61) 345.8 (13.61) Frame size FSF FSF FSF Weigh, approx. PM340 wih/wihou inegraed filer kg (lb) 50.7/66.7 (112/147) 50.7/66.7 (112/147) 50.7/66.7 (112/147) 0.04 (0.31) 0.117 (0.38) 1) The inpu curren depends on he moor load and line impedance. The inpu currens apply for raed power loading (based on I raed ) for a line impedance corresponding o u k = 1%. 2) Max. moor cable lengh 25 m (82.0 f) (shielded) for PM340 wih inegraed line filer o mainain he limi values of EN 61800-3 Caegory C2. 3) Nominal HP based on Asynchronous moors (inducion moors). For specific sizing selec drive based on moor nameplae curren and overload. /74
Selecion and Ordering Daa SINAMICS S120 drive sysem Raed oupu curren Raed power Frame size PM340 Power Module in blocksize forma wihou line filer wih inegraed line filer A kw (HP) 1) Order No. Order No. Line volage 200... 240 V 3 AC 0. 0.12 (0.2) FSA 1SB11-0UA0 1SB11-0AA0 2.3 0.37 (0.5) FSA 1SB12-3UA0 1SB12-3AA0 3. 0.75 (0.75) FSA 1SB14-0UA0 1SB14-0AA0 Line volage 380... 480 V 3 AC 1.3 0.37 (0.5) FSA 1SE11-3UA0 1.7 0.55 (0.75) FSA 1SE11-7UA0 2.2 0.75 (1) FSA 1SE12-2UA0 3.1 1.1 (1.5) FSA 1SE13-1UA0 4.1 1.5 (2) FSA 1SE14-1UA0 5. 2.2 (3) FSB 1SE16-0UA0 1SE16-0AA0 7.7 3 (5) FSB 1SE17-7UA0 1SE17-7AA0 10.2 4 (5) FSB 1SE21-0UA0 1SE21-0AA0 18 7.5 (10) FSC 1SE21-8UA0 1SE21-8AA0 25 11 (15) FSC 1SE22-5UA0 1SE22-5AA0 32 15 (20) FSC 1SE23-2UA0 1SE23-2AA0 38 18.5 (25) FCD 1SE23-8UA0 1SE23-8AA0 45 22 (30) FCD 1SE24-5UA0 1SE24-5AA0 60 30 (40) FCD 1SE26-0UA0 1SE26-0AA0 75 37 (50) FSE 1SE27-5UA0 1SE27-5AA0 0 45 (60) FSE 1SE31-0UA0 1SE31-0AA0 110 55 (75) FSF 1SE31-1UA0 1SE31-1AA0 145 75 (100) FSF 1SE31-5UA0 1SE31-5AA0 178 0 (125) FSF 1SE31-8UA0 1SE31-8AA0 Accessories Example of shield connecion ki for PM340 frame size FSB Designaion Shield connecion ki for PM340 Frame size FSA Frame size FSB Frame size FSC Frame sizes FSD and FSE Frame size FSF Order No. 6SL3262-1AA00-0BA0 6SL3262-1AB00-0DA0 6SL3262-1AC00-0DA0 6SL3262-1AD00-0DA0 6SL3262-1AF00-0DA0 1) Nominal HP based on Asynchronous moors (inducion moors), see echnical specificaions for specific sizing. /75
SINAMICS S120 drive sysem Characerisic curves Overload capabiliy max max raed 0.25 s 10 s G_D211_EN_00082 raed 0.7 x raed 10 s 60 s G_D211_EN_00085 Duy cycle wih previous load S6 duy cycle wih previous load wih a duy cycle duraion of 60 s max 1.5 x H raed 2.65 s 10 s G_D211_EN_00083 raed H 60 s Base load curren H 300 s G_D211_EN_00001b Duy cycle wihou previous load Duy cycle wih 60 s overload wih a duy cycle duraion of 300 s max 1.76 x H S6 raed 0.7 x raed 4 min 10 min G_D211_EN_00084 raed H 30 s Base load curren 300 s H G_D211_EN_00002b S6 duy cycle wih previous load wih a duy cycle duraion of 600 s Duy cycle wih 30 s overload wih a duy cycle duraion of 300 s /76
SINAMICS S120 drive sysem Characerisic curves (coninued) Deraing characerisics Frame sizes FSA o FSE Permissible oupu curren 100 % 80 60 40 20 0 2 4 6 8 10 12 14 16 khz 20 Pulse frequency Oupu curren dependen on pulse frequency Frame sizes FSF Permissible oupu curren 100 % 80 60 40 20 0 2 4 6 8 10 12 14 16 khz 20 Pulse frequency Oupu curren dependen on pulse frequency Permissible oupu curren 100 % 0 80 70 60 30 35 40 45 50 C 55 (86) (5) (104) (113) (122) ( F) (131) Ambien emperaure Oupu curren dependen on ambien emperaure G_D211_EN_00087 G_D211_EN_00088 G_D211_EN_0008 Permissible oupu curren 100 % 5 0 85 80 75 70 65 60 0 1000 2000 3000 4000 m 5000 (3282) (6563) (845) (13126) (f) (16408) Insallaion aliude above sea level Oupu curren dependen on insallaion aliude Permissible inpu volage in % of raed volage 100 0 80 Volage deraing dependen on insallaion aliude G_D211_EN_00006a 70 0.7 0 1000 2000 3000 m 4000 (3282) (6563) (845) (f) (13126) Insallaion aliude above sea level 1.0 0. 0.8 G_D211_EN_0000 Deraing facor k U /77