SECTION F (REV.B) INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY Download from: www.urmetdomus.com Technical Manuals area BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
INTERCHANGEABLE DEVICES INTERCHANGEABLE DEVICES Some devices replace previous models and may be used as spare parts. The correspondence between versions is: (*) Not available in Italy. UNITS RELAY DEVICES TRANSFORMERS APARTMENT STATIONS DOOR UNITS PREVIOUS MODEL NEW MODEL SEE PAGE 78/ 78/ 3 78/5A 78/5 4 78/4 78/ or 78/ (*) 3 787/4 78/4 7 789 789/A 789 789/5B 789/A 789/5B 84/ 9/85 7 434/ 75/ 8 773 789/A 9 773/ 789/A 9 773/ 789/A 9 773/5A 789/ 9/ 78/ 9/ 78/ 9/3 78/3A 4 9/5 78/5 5 9/4 78/ or 78/ (*) 9/ 78/ or 78/ (*) 98/4 78/38A 4 788/ 788/5 788/5 788/5 7 788/4 788/54 9 788/8 788/58 8 788/ 788/5 5 788/ 788/5 5 788/3 788/5 7 433/3 788/5 434/ 788/5 5 45/ 788/5 5 933 (II series) 788/5 7 933/ 788/5 933/5 788/5 7 933/8 788/58 8 9/ 9/3 or 9/ (*) 8 / Ranger 7/ Atlantico / 7/ Atlantico 74/ Sentry 75/ Artico 74/A Sentry+ 75/ Artico 74/ Sentry 75/ Artico 74/A Sentry+ 75/ Artico 74/9 74/ 74/955 74/ 434/3 75/3 8 78/ Vedette 74/ Sentry+ 79/ Sentinel 74/ Sentry+ 7/ Explorer 74/ Sentry+ 55/5 8/5 4 INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 3
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING RELAY UNIT Ref. 78/5A AND Ref. 9/5 WITH Ref. 78/5 REPLACING RELAY UNIT Ref. 78/5A AND Ref. 9/5 WITH Ref. 78/5 The 78/5 relay power unit can replace the following obsolete models: Ref. 9/5 Ref. 78/38A Follow the following diagrams according to the type of system in which the power unit is being replaced for correct connection. ELECTRONIC CALL INTERCOM SYSTEMS AND DOOR UNIT With single calls from door unit and door phones with buzzer (differential call) Ref.78/5A Ref.78/5 With single calls from door unit and door phones without buzzer. Ref.78/5A Ref.78/5 With single call from door unit and door phones with buzzer. Ref.78/5A Ref.78/5 A P P + P PS C C SN SN ~8 5 3 9 + 4 7 8 PS C C PS SN SN A P P + P PS C C SN SN ~8 5 3 9 + 4 7 8 PS C C PS SN SN A P P + P PS C C SN SN ~8 5 3 9 + 4 7 8 PS C C PS SN SN 4 sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING RELAY UNIT Ref. 78/5A AND Ref. 9/5 WITH Ref. 78/5 TRADITIONAL CALL INTERCOM SYSTEMS AND DOOR UNIT With single calls from door unit and door phones with buzzer. Ref.78/5A A P P P PS C C Ref.78/5 Ref.9/5 Ref.78/5 + SN SN ~8 5 3 9 + 4 7 8 PS C C PS SN SN P P SN SN ~8 5 3 9 + 4 7 8 PS C C PS SN SN INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 5
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING VIDEO DOOR PHONE UNIT Ref. 789 WITH Ref. 789/A REPLACING VIDEO DOOR PHONE UNIT Ref. 789 AND Ref. 789/A WITH Ref. 789/5B REPLACING VIDEO DOOR PHONE UNIT Ref. 789 WITH Ref. 789/A The 789/A power unit can replace the obsolete 789 model. REPLACING VIDEO DOOR PHONE UNIT Ref. 789 AND Ref. 789/A WITH Ref. 789/5B The 789/5B video power unit has the following characteristics: ) It must be powered at 3 V exclusively. ) It can only be used in video door phone systems with electronic call system (it only has a PS output, no SN output). 3) It can power only two video door phones in standby mode (V). 4) It can power up to video distributors. 5) It is not provided with a output for intercom service. Ref. 789 Ref. 789/A 3 3 ~A ~A ~B ~B PS PS SN SN /~ /~ R R R R +TC +TC It can therefore replace the Ref. 789 and Ref. 789/A power units only in systems with the characteristics and limitations above. In these cases, the terminals correspond as follows: SV84B VOLTAGE UNIT ELECTRONIC UNIT AP SE SE J AP SE SE J Ref.789/5B (3V) Ref.789(3V) Ref.789/ (/3V) sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING DOOR PHONE UNIT Ref. 84/ WITH Ref. 9/85 REPLACING DOOR PHONE UNIT Ref. 787/4 WITH Ref. 78/4 REPLACING DOOR PHONE UNIT Ref. 84/ WITH Ref. 9/85 The 9/85 power unit can replace the obsolete 84/ model. Ref. 84/ Ref. 9/85 ~3 ~3 ~4 Not available ~4 Not available + () Vout () GND REPLACING DOOR PHONE UNIT Ref. 787/4 WITH Ref. 78/4 The Ref. 78/4 power unit can replace the obsolete Ref. 787/4 model. P P Notes (#) If a 4Vac output is needed, use a transformer with minimum output current of. Aac ( ) because the device 84/ actually outputs approximate 4.3 Vdc (#) (#) Remove the jumper between terminals P and P (*) Ref. 787/4 Ref. 78/4 3 3 PS PS PS PS /~ /~ SN SN NA NA NC NC C C INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 7
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING DOOR PHONE TWOCHANNEL SYSTEM UNIT Ref. 434/ WITH Ref. 75/ REPLACING TWOCHANNEL SYSTEM DOOR PHONE APARTMENT STATION Ref. 434/3 WITH Ref. 75/3 REPLACING DOOR PHONE TWOCHANNEL SYSTEM UNIT Ref. 434/ WITH Ref. 75/ REPLACING TWOCHANNEL SYSTEM DOOR PHONE APARTMENT STATION Ref. 434/3 WITH Ref. 75/3 The Ref. 75/ power unit can replace the obsolete Ref. 434/ model. The Ref. 75/3 twochannel door phone apartment station replaces the Ref. 434/3 model. The correspondence between device terminals is shown in the following diagram. PUSH BUTTONS MODULE (C4.7) TO THE FOLLOWING MODULE Microphone module Loudspeaker module G/T U4 U3 U G/T U G/T U U G/T L +M + Name tag lighting To bulb transformer KOMBI FREEHANDS PANEL AND DOOR UNIT (C4.9) twisted coupled wires To bulb transformer (C4.9) twisted coupled wires ELECTRIC LOCK ELECTRIC LOCK ELECTRIC LOCK C4.7 Sinthesi models only: See instruction booklet provided with product for connecting terminals G/T, and between modules. C4.9 IMPORTANT Use cord pairs. VD.7 = Floor call button. VX. See the instruction book provided with the product for fitting the accessory in the device. VX.4 Dusk switch or similar device for switching lights on, where relevant. 434/7 PANEL AND DOOR UNIT TO THE FOLLOWING INDOOR SETS To bulb transformer (C4.9) twisted coupled wires (VD.7) (VD.7) Lock Release INDOOR SET Ref.434/3 Ref.434/ MAIN ~ /~ +/~ Name tag lighting SCB INDOOR SET Ref.75/3 (VX.) Ref.75/ ~ (VX.4) ~ TRANSFORMER 8 sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING VIDEO DOOR PHONE UNIT Ref. 773, Ref. 773/ AND Ref. 773/ WITH Ref. 789/A REPLACING VIDEO DOOR PHONE UNIT Ref. 773, Ref. 773/ AND Ref. 773/ WITH Ref. 789/A The Ref. 789/ A power unit replace the previous Ref. 773, Ref. 773/ and Ref. 773/ power units in all systems except for: ) Systems with Vidicon camera: Mod. 789 power units are not provided with + LA, LA outputs for powering lamps. ) Continuously powered systems. 3) Systems with more than video door phones monitors in standby: in this case use a Vdc power unit providing suitable output current considering that the average consumption of a video door phone in standby is macc. 4) Systems with simultaneous operation of or more video door phones: in this case, power each supplementary video door phone using local power unit Ref. 789/. 5) The Ref. 789/ video power unit (3V) consists of two units connected using the specifi c wire and plugs (C). The power unit Ref. is 789/ (3V). The electronic unit Ref. is 789/. Jumpers, ~A and, ~B are prefi tted. Ref.789/ (/3V) VIDEO Ref.773 OR 773/ INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY VIDEO Ref.773/ VIDEO Ref.773/ + CALL GENERATOR Ref.787/ BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 9
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING VIDEO DOOR PHONE UNIT Ref. 773, Ref. 773/ AND Ref. 773/ WITH Ref. 789/A SCOUT AND CAMERA SYSTEMS (CCD CAMERA ONLY) The Ref. 787/ tone generator is not used because it is replaced by a generator inside the Ref. 789/ A power unit. Connect jumpers SE, during installation. Ref.789/A (/3V) ELECTRONIC UNIT VOLTAGE UNIT SENTINEL, EXPLORER AND RANGER AND CAMERA SYSTEMS (CCD CAMERA ONLY) Ref.789/A (/3V) VOLTAGE UNIT ELECTRONIC UNIT TONE GENERATOR Ref.787/ VIDEO Ref.773/ VIDEO Ref.773/ LOCK RELEASE LOCK RELEASE SV583A CCD TV CAMERA UNIT L.U. PUSH BUTTON PANEL TV CAMERA UNIT ELECTRIC LOCK SV58A CCD TV CAMERA UNIT L.U. PUSH BUTTON PANEL TV CAMERA UNIT ELECTRIC LOCK sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
SENTINEL, EXPLORER AND RANGER WITH SWITCHBOARD AND CAMERA SYSTEMS (CCD CAMERA ONLY) Cut the existing jumpers between terminals ~ A, and between ~B, of the Ref. 789/A power unit during installation. CCD TV CAMERA UNIT PUSH BUTTON PANEL TV CAMERA UNIT ELECTRIC LOCK L.U. REPLACING VIDEO DOOR PHONE UNIT Ref. 773, Ref. 773/ AND Ref. 773/ WITH Ref. 789/A LOCK RELEASE SINGLES COMMONS STANDARD HOUSE SWITCHBOARD Ref.78/3 VIDEO Ref.773/ SV584A Ref.789/A (/3V) ELECTRONIC UNIT VOLTAGE UNIT NOTE INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY SENTINEL, EXPLORER AND RANGER AND CAMERA SYSTEMS (VIDICON CAMERA) The Ref. 789/A power unit is not provided with +LA and LA outputs. An auxiliary ~4 V transformer, minimum 4 W (not included), and Ref. 788/5 control relay is needed to power the lights. Ref.789/ (/3V) SV55A VOLTAGE UNIT ELECTRONIC UNIT VIDEO Ref.773/ VIDICON TYPE TV CAMERA PUSH BUTTON PANEL RELAY Ref.933/5 TRANSFORMER 4V~ 5W LOCK RELEASE L.U. TV CAMERA UNIT ELECTRIC LOCK BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING DOOR PHONE UNITS Ref. 9/, 9/, 9/4 AND 9/ WITH Ref. 78/ The Ref. 78/ power unit can replace the following obsolete models: Ref. 9/ Ref. 9/ Ref. 9/4 Ref. 9/ REPLACING DOOR PHONE UNITS Ref. 9/, 9/, 9/4 AND 9/ WITH Ref. 78/ Ref. 9/ Ref. 78/ ~ ~3 Ref. 9/ Ref. 78/ ~ ~3 Ref. 9/4 Ref. 78/ ~ Not available ~ ~3 ~4 Not available ~8 Not available Ref. 78/ ( ) ~ Not available Not available Not available ( ) Not available in Italy. (#) If a 8Vac output is needed, use a transformer with minimum output current of.5 Aac and connect as shown in the attached diagram: MAINS~ MAINS~ ~ ~ 8Vca Notes (#) sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING DOOR PHONE UNITS Ref. 9/, 9/, 9/4 AND 9/ WITH Ref. 78/ Ref. 9/ Ref. 78/ ~ Not available ~ ~3 ~4 Not available ~4 Not available Ref. 78/ ( ) ~ Not available Not available Not available ( ) Not available in Italy. (#) If a 4Vac output is needed, use a transformer with minimum output current of.5 Aac and connect as shown in the attached diagram: MAINS~ MAINS~ ~ ~ 4Vca Notes (#) INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 3
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING SWITCHBOARD SYSTEM UNIT Ref. 9/3 WITH Ref. 78/3A REPLACING DOOR PHONE UNIT Ref. 98/4 WITH Ref. 78/38A REPLACING DOOR UNIT Ref. 55/5 WITH Ref. 8/5 REPLACING SWITCHBOARD SYSTEM UNIT Ref. 9/3 WITH Ref. 78/3A The Ref. 78/3A power unit can replace the obsolete 9/3 model. REPLACING DOOR PHONE UNIT Ref. 98/4 WITH Ref. 78/38A The Ref. 78/38A power unit can replace the obsolete 98/4 model. Ref. 9/3 Ref. 78/3 ~ Not available ~ ~3 ~4 Not available 5 5 +5 +5 Ref. 98/4 Ref. 78/38A ~ ~ ~ ~3 ~4 Not available ~8 ~8 REPLACING DOOR UNIT Ref. 55/5 WITH Ref. 8/5 Ref. 55/5 Ref. 8/5 + + A A 4 sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING RELAY BOXES Ref. 788/, Ref. 788/, Ref. 434/ AND Ref. 45/ WITH Ref. 788/ REPLACING RELAY BOXES Ref. 788/, Ref. 788/, Ref. 434/ AND Ref. 45/ WITH Ref. 788/5 The 788/5 relay box can replace the following obsolete models: Ref. 788/ Ref. 788/ Ref. 434/ Ref. 45/ Ref. 788/ Ref. 788/5 (R) ~ C C CA CA ~ ~ 7 S S S S S3 S3 S4 S4 S5 S5 S Ref. 788/ Ref. 788/5 R ~ 7 ~ CA CA C C S S S S3 S S3 INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY Ref. 434/ Ref. 788/5 ~ ~ CA CA S S S3 S3 Ref. 45/ Ref. 788/5 R 5 7 S S 5 S S3 BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 5
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING RELAY BOXES Ref. 933/, Ref. 433/3 and Ref. 788/ WITH Ref. 788/ REPLACING SUPPLEMENTARY VIDEO DOOR PHONE UNIT Ref. 773/5A WITH Ref. 789/ REPLACING RELAY BOXES Ref. 933/, Ref. 433/3 AND Ref. 788/ WITH Ref. 788/ The Ref. 788/5 relay box can replace the obsolete 933/ model. Ref. 433/3 Ref. 933/ Ref. 788/ Ref. 788/5 P S 4P 4 4S AP/P AP AP/S 3P 3 3S Note : Terminals C, C, of relay Ref. 788/5 must be connected together by jumpers and connected to. Note : Terminal not present in Ref. 933/ and Ref. 788/5. Add power wire. REPLACING SUPPLEMENTARY VIDEO DOOR PHONE UNIT Ref. 773/5A WITH Ref. 789/ The Ref. 789/ power unit can replace the obsolete Ref. 773/5 model. Ref. 773/5 Ref. 789/... PUL/P PUL/P A B 3 4 5 7 8 9 3 4 5 SN SN SN ~ ~3 R in R out RL R V 3 4 5 7 8 9 3 4 5 SN SN C C 3 4 5 7 8 9 3 4 5 SN SN C C Not available ~3 R in R out RL R V sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING RELAY BOX Ref. 933/5 AND Ref. 788/5 WITH Ref. 788/5 REPLACING RELAY BOX Ref. 933 (II SERIES) AND Ref. 788/3 WITH Ref. 788/5 REPLACING RELAY BOX Ref. 933/5 AND Ref. 788/5 WITH Ref. 788/5 The Ref. 788/5 relay box can replace the obsolete 933/5 and 788/5 model. RELAY CONTACTS Ref. 933/5 Ref. 788/5 4 4 5 5 3 3 4 4 5 5 Ref. 788/5 REPLACING RELAY BOX Ref. 933 (II SERIES) AND Ref. 788/3 WITH Ref. 788/5 The Ref. 788/5 relay box can replace the obsolete 933 II series model (which is not provided with a 5 ohm resistor in series with terminal ) and 788/3 model. RELAY CONTACTS Ref. 933 (II series) Ref. 788/3 4 4 5 5 3 3 4 4 5 5 7 7 8 8 9 9 4 5 S S S3 S4 S5 S Ref. 788/5 4 5 S S S3 S4 S5 S INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 7
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING RELAY BOX Ref. 933/8 AND Ref. 788/8 WITH Ref. 788/58 REPLACING VAC TRANSFORMER Ref. 9/ WITH Ref. 9/3 REPLACING RELAY BOX Ref. 933/8 AND Ref. 788/8 WITH Ref. 788/58 The Ref. 788/58 relay box can replace the obsolete 933/8 and 788/8 model. Note : Terminals C, C, of relay Ref. 788/58 must be connected together by jumpers and connected to. REPLACING VAC TRANSFORMER Ref. 9/ WITH Ref. 9/3 The 9/3 transformer can replace the obsolete 9/ model. ( ) Not available in Italy. Ref. 933/8 Ref. 788/8 AP I I I AP I II II II AP II III III III AP III IV IV IV AP IV SN SN SN3 SN4 A B AP I I I AP I II II II AP II III III III AP III IV IV IIV AP IV SN SN SN3 SN4 C C Ref. 788/58 AP I I I AP I II II II AP II III III III AP III IV IV IIV AP IV SN SN SN3 SN4 C C Ref. 9/ Ref. 9/3 ~ Not available ~ ~3 ~4 Not available Ref. 9/ ( ) ~ Not available Not available 8 sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING RELAY BOX Ref. 933/5 AND Ref. 788/5 WITH Ref. 788/5 REPLACING RELAY BOX Ref. 933 (II SERIES) AND Ref. 788/3 WITH Ref. 788/5 REPLACING RELAY BOX Ref. 788/4 WITH Ref. 788/54 The Ref. 788/54 relay box can replace the obsolete 788/4 model. COLUMN INPUT (A, B, C, D) Ref. 788/4 Ref. 788/54 GND GND IN H IN H ~B ~B ~A ~A +TC +TC R R R R 9 9 R R R R V5 V5 V3 V3 +TC +TC R R V5 V5 V3 V3 SE SE C C SN SN C C SN SN C3 C3 SN3 SN3 C4 C4 SN4 SN4 AP AP SE SE INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 9
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS RANGER VIDEO DOOR PHONES WINFLAT+ BRACKET Ref. /59 FOR ADAPTING COAX VIDEO DOOR PHONE SYSTEMS Ranger video door phones Ref. / (and respective brackets Ref. /9) can be replaced in traditional call video door phone systems with Atlantico video door phones Ref. 7/ and specifi c bracket Ref. /59. The terminals on Ref. /59 brackets have the same numbers as the Ref. /9 brackets to replace simply by connecting the wires in the same way. Note that the replacement is only possible in systems fi tting Ranger basic model Ref. / with bracket Ref. /9. It is not possible in systems with switchboard, special systems and intercom systems because bracket Ref. /59 is not suitable for replacing special brackets Ref. /9, Ref. /7, Ref. /7, Ref. /73 and Ref. /75. WINFLAT+ BRACKET Ref. /59 FOR ADAPTING VIDEO DOOR PHONE SYSTEMS WITHOUT COAXIAL CABLE Ranger video door phones Ref. 955/5 with brackets Ref. 955/74 can be replaced in 5wire systems with Atlantico video door phones Ref. 7/ using adapter bracket Ref. /59. Replacement is only possible in basic systems. EXPLORER, VEDETTE, SENTINEL AND VIDOFONO VIDEO DOOR PHONES SENTRY VIDEO DOOR PHONE WITH BRACKET Ref. 74/A FOR ADAPTING EXPLORER, VEDETTE, SENTINEL AND VIDOFONO SYSTEMS EXPLORER, VEDETTE and SENTINEL video door phones can be replaced with SENTRY+ Ref. 74/A video door phones in traditional call video door phone systems. SENTRY+ Ref. 74/A is a video door phone with a 4.5 kinescope screen arranged on the longest side in the horizontal direction. The SENTRY+ Ref. 74/A bracket terminals have the same numbers as the EXPLORER, VEDETTE, SENTINEL and VIDOFONO terminal boards to simply connect the wires in the same way. This video door phone can be fi tted only in traditional basic systems (with Vac call). It is not suitable for use in switchboard or intercom systems because the bracket is not suitable to replace all versions. SENTRY+ Ref. 74/A is complete with bracket and white. The monitor is a refl ex version; brightness and contrast can be adjusted by means of the controls. The call signal is sent to the buzzer fi tted on the bracket. The door lock can be released by pressing the button. The two service buttons and can be used to operate accessory circuits. SENTRY+ Ref. 74/A video door phones are used to view the picture from a camera arranged to frame a fi eld with the longest side arranged vertically. This arrangement causes a 5 to 3% reduction of the framed fi eld with respect to EXPLORER, VEDETTE, SENTINEL and VIDOFONO video door phones. TO THE FOLLOWING VIDEO DOOR PHONES Sentry+ Sentry+ Vedette,Vidofono Sentinel,Explorer (C3) (C) (C5) [] [] [] (C9) [] (C) (C4) [7] [9] (C7) [X] (C) [X] (C) [Y] (C8) [Y] RISING COLUMN Ref.74/ Explorer Sentinel Scout Vedette Vidofono Sentry+ video door phone is provided with an additional speaker to considerably increase volume of the call. Connecting the wires to the system is fast via terminal boards on the bracket to which the video door phone is then fi tted. sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACEMENT OPTIONS FOR RANGER, EXPLORER, VEDETTE AND SENTINEL IN TRADITIONAL CALL SYSTEM VIDEO DOOR PHONES SYSTEMS The device is provided with the following controls: One door opening button ( ). Two service buttons ( and ) which can be used, for example, to switch on the staircase lights, open an additional lock or to implement automatic switchon function. Two potentiometers for adjusting picture brightness ( ) and contrast ( ). One switch for threeposition call tone volume adjustment ( ) (minimum, medium and maximum volume). TECHNICAL SPECIFICATIONS Power voltage: 8.5Vdc Intake: Working: max..5a Standby: A Power: Working: max. W CCIR version: Vertical frequency 5Hz ± Hz Horizontal frequency: 55 ± 4Hz EIA version: Vertical frequency Hz ± Hz Horizontal frequency: 5734 ± 4Hz Video signal: Vpp 75Ω nominal Vpp. db minimum Kinescope: 4.5 9 neck mm Switchon delay: 7 max Xrays: none Operating temperature range: 5 + 5 C Humidity: max. 9% RH 3 mm mm Service button Service button Door opener button Call volume Contrast adjustment Brightness adjustment 99 mm INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY TERMINAL BOARD Speaker signal CA Call signal Microphone signal } Power ground 9 Door opener control X X } Service button terminals Y Y } Service button terminals R3 Silent video on R Video power negative R Video power positive RT Secondary monitor power positive V4 Composite video signal for second monitor inout connection (connect a 75Ω resistor between V4 and V5 if not present) V5 Video signal earth V3 Composite video signal INSTALLATION Arrange the duct so that it ends in correspondence with the input hole on the bracket and proceed as follows: ) Fasten the bracket to the wall at the height from the fl oor shown by means of the four screws. ) Connect the wires to the specifi c terminals. 3) Extract the retainer hook A by inserting the tip of a screwdriver and pulling the hook downwards. 4) Check that switch on back of video door phone is in the A position. 5) Fasten the monitor to the bracket. ) Fasten the monitor by pushing the retainer hook A upwards. A B A Bracket,55 m BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACEMENT OF SENTRY VIDEO DOOR PHONES WITH ARTICO Using the bracket without circuit for the Artico video door phone Réf. 75/ it is possible to replace the Sentry video door phones in any type of system. Proceed as follows:. Remove the Sentry video door phone from the bracket.. Disconnect all conductors from the Sentry bracket terminals. 3. Loosen the 4 fastening screws from the wall bracket 4. Remove the printed circuit from the Sentry bracket by loosening the fastening screws (A). 5. Fit the printed circuit on the Artico bracket Ref. 75/ using the screws provided (screws B). Fasten the Artico bracket to the wall using the 4 screws fastening the Sentry bracket B 7. Reconnect the wires to the specifi c terminals. 8. Insert the Artico video door phone on the bracket fastening it with the hook A. A A Ref. 75/ REPLACEMENT OF SENTRY VIDEO DOOR PHONES WITH ARTICO Sentry bracket Bracket Ref. 75/ SENTRY+ BRACKET REPLACEMENT Bracket Ref. 75/ SENTRY+ BRACKET REPLACEMENT Procure a plastic support Ref.74/ and the Artico bracket corresponding to the system in use in the installation to replace a faulty Sentry+ video door phone bracket: Coax Ref. 75/9 5 wires Ref. 75/955 Then proceed as follows: Remove the printed circuit from the Artico bracket. Artico bracket Fasten the printed circuit on the plastic support Ref. 74/. Plastic support Ref. 74/ Remove the Sentry video door phone from the bracket. Disconnect all conductors from the Sentry bracket terminals. Loosen the 4 fastening screws from the wall bracket. Fasten the plastic support on the printed circuit to the wall. Reconnect the wires to the specifi c terminals. Fit the video door phone on the bracket. sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams
REPLACING DOOR PHONE UNIT Ref. 78/ WITH Ref. 78/ REPLACING DOOR PHONE UNIT Ref. 78/4 WITH Ref. 78/ REPLACING DOOR PHONE UNIT Ref. 78/ WITH Ref. 78/ The Ref. 78/ power unit can replace the obsolete 78/ model. REPLACING DOOR PHONE UNIT Ref. 78/4 WITH Ref. 78/ The Ref. 78/ power unit can replace the obsolete 78/4 model. ~3 ~8 PS Ref. 78/ Ref. 78/ ~3 PS Ref. 78/ Ref. 78/ ~3 ~ Not available (#) PS ~3 PS Ref. 78/ (*) Not available ~ (#) PS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY ( ) Not available in Italy. (#) If a 8Vac output is needed, use a transformer with minimum output current of.5 Aac and connect as shown in the attached diagram: MAINS~ 8Vca MAINS~ ~ ~ BASIC SYSTEM DIAGRAMS DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams sec.f 3
BASIC SYSTEM DIAGRAMS INSTRUCTIONS FOR URMET DOMUS DEVICE INTERCHANGEABILITY REPLACING SCAITEL VIDE DOOR PHONE BLACK/WHITE Video door phone Mod.Atlantico (A) Ref.7/ Mod.Artico (A) Ref.75/ Mod.Scaitel (B) Ref.73/ Ref.3/ Ref.3/55 Bracket Ref./9 Ref.75/9 Ref.73/9 COLOUR Video door phone Ref.7/4 Ref.73/4 Ref.3/ Ref.3/55 Bracket REPLACING SCAITEL VIDE DOOR PHONE Ref./9 Ref.73/9 SCAITEL VIDEO DOOR PHONE VIDEO MODULE DOOR PHONE 4 sec.f DOOR PHONE VIDEO DOOR PHONE SYSTEMS: Installation Diagrams