Hedge and Verge Cutters THE FARMER S FAVOURITE FOUNDED IN 1830
TE Range of Hedge and Verge Cutters 4.8m (15ft 9in) reach 1.2m cut flailhead (belt drive) Totally independent hydraulics 3-point linkage mounted (Cat II) Machine weight 970kg 140 litre capacity 240 O head rotation Cast iron pumps and motor Mechanical safety breakback Cable controls Head float Dual direction flail rotation Cab safety guard kit Chain stabiliser kit Oil included Minimum tractor requirement 60hp, 2250kg. 2
Controls Cutting Dimensions 2.4m 0.5m Double Skin Cutter Head Cable controls 5.6m 4.2m 45.0 O 2.8m 4.6m 4.8m 1.0m Double skin for greater strength and longer working life. Drive line contained within width of skid for a cleaner cut and better manoeuvrability. Simple belt adjustment Quick fit heavy duty rotor takes 5 types of flail Heavy braced end panels Adjustable heavy duty roller Skid wrapped around panel for greater protection Nose guard with barbed wire trap and heavy duty curtain Choice of flails Heavy Duty Reversible Lump Flail for hedging and occasional mowing. Fitted as standard unless stated Machine Type TE480 Reach (m / ft, ins) 4.8 / 15 9 Cutting width (m) 1.2 Minimum tractor power (hp) 60 Left or right cut Mechanical safety breakaway Flail cutting reversible by cable control Fully Independent Hydraulics Cable controls Flotation Head flotation Boom flotation Heavy Duty Grass and hedging flail. Cuts in one direction flail for grass cutting Cast Boot Flail and shackle for mowing or hedging. Cuts in one direction only flail and shackle for grass cutting 3
TF Range of Hedge and Verge Cutters 5.0m (16ft 6in) reach Parallel arm geometry 1.2m cut flailhead (belt drive) Totally independent hydraulics 3-point linkage mounted (Cat II) Machine weight 1000kg 140 litre capacity 240 O head rotation Cast iron pumps and motor Mechanical safety breakback Cable controls Head float Dual direction flail rotation Cab safety guard kit Bar stabiliser kit Oil included Minimum tractor requirement 60hp, 2250kg. 4
Controls Cutting Dimensions 3.0m 1.2m Double Skin Cutter Head Cable Controls 5.9m 4.4m 45.0 O 2.6m 1.0m Double skin for greater strength and longer working life. Drive line contained within width of skid for a cleaner cut and better manoeuvrability. Simple belt adjustment Quick fit heavy duty rotor takes 5 types of flail Heavy braced end panels Adjustable heavy duty roller Skid wrapped around panel for greater protection Nose guard with barbed wire trap and heavy duty curtain Choice of flails 4.8m 5.0m Heavy Duty Reversible Lump Flail for hedging and occasional mowing.fitted as standard unless stated Machine Type TF500 Reach (m / ft, ins) 5.0 / 16 6 Cutting width (m) 1.2 Minimum tractor power (hp) 60 Left or right cut Parallel arm geometry Mechanical safety breakaway Flail cutting reversible by cable control Fully Independent Hydraulics Cable controls Flotation Head flotation Boom flotation Heavy Duty Grass and hedging flail. Cuts in one direction flail for grass cutting Cast Boot Flail and shackle for mowing or hedging. Cuts in one direction only flail and shackle for grass cutting 5
TC Range of Hedge and Verge Cutters TC526-5.25m (17ft 6in) reach TC586-5.85m (19ft 6in) reach Parallel arm geometry 1.2m cut flailhead (belt drive) Totally independent hydraulics 3-point linkage mounted (Cat II) Cast iron pumps and motor Powerslew and hydraulic breakaway Cable or proportional controls 240 O head rotation 200 litre capacity Head float Dual direction flail rotation Cab safety guard kit Heavy duty bar stabiliser kit Oil included Minimum tractor requirements TC526 65hp, 3000kg. Minimum tractor requirements TC586 85hp, 3250kg. 6
Controls Cutting Dimensions A B TC526 5.25m 4.8m TC586 5.85m 5.4m C 6.4m 7.0m D 5.5m 6.1m Double Skin Cutter Head Cable Controls C D Low Pressure Hydraulic Proportional Joystick B A Double skin for greater strength and longer working life. Drive line contained within width of skid for a cleaner cut and better manoeuvrability. Simple belt adjustment Quick fit heavy duty rotor takes 5 types of flail Heavy braced end panels Adjustable heavy duty roller Skid wrapped around panel for greater protection Nose guard with barbed wire trap and heavy duty curtain Choice of flails Machine Type TC526 Reach (m / ft, ins) 5.25 / 17 6 Cutting width (m) 1.2 Minimum tractor power (hp) 65 Left or right cut Parallel arm geometry Sprung top link Powerslew & hydraulic breakaway Flail cutting reversible by cable control Fully Independent Hydraulics Cable controls Low pressure hydraulic joystick TC586 5.85 / 19 6 1.2 85 Heavy Duty Reversible Lump Flail for hedging and occasional mowing.fitted as standard unless stated Heavy Duty Grass and hedging flail. Cuts in one direction flail for grass cutting Flotation Head flotation Boom flotation Options Rear lights High power Quick hitch Cast Boot Flail and shackle for mowing or hedging. Cuts in one direction only flail and shackle for grass cutting 7
Contacts Sales Manager Trevor Folland 01884 253 691 TWOSE is a member of the Alamo Group Area Managers North of England, Isle of Man, Scotland and the Islands Bob Brown 07967 152 481 Northern Ireland George Hamilton 02894 472 269 West, South West, Wales Richard Spiller 07767 208 121 East, South East Glenn Bootman 07899 662 304 Parts Administrator Dale Lewis 01884 253 691 dlewis@twose.com Twose of Tiverton Limited 6 Chinon Court, Lower Moor Way, Tiverton, Devon, EX16 6SS, England Tel: 01884 253691 Fax: 01884 255189 Email: sales@twose.com www.twose.com